Add a vclean_unlocked() call that allows HAMMER to try to get rid of a
[dragonfly.git] / contrib / tcpdump-3.9 / CHANGES
blobaa29e305cfdf711954c554eb96fb42946f356891
1 $Header: /tcpdump/master/tcpdump/CHANGES,v 1.87.2.17 2007/09/13 13:39:44 ken Exp $
3 Mon.    September 10, 2007.  ken@xelerance.com.  Summary for 0.9.8 tcpdump release
4         Rework ARP printer
5         Rework OSPFv3 printer
6         Add support for Frame-Relay ARP
7         Decode DHCP Option 121 (RFC 3442 Classless Static Route)
8         Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
9         TLV: Add support for Juniper .pcap extensions
10         Print EGP header in new-world-order style
11         Converted print-isakmp.c to NETDISSECT
12         Moved AF specific stuff into af.h
13         Test subsystem now table driven, and saves outputs and diffs to one place
14         Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted 
15          libpcap files on an OS other than where the file was generated
17 Wed.    July 23, 2007.  mcr@xelerance.com.  Summary for 0.9.7 tcpdump release
19         NFS: Print unsigned values as such. 
20         RX: parse safely.
21         BGP: fixes for IPv6-less builds.
22         801.1ag: use standard codepoint.
23         use /dev/bpf on systems with such a device.
24         802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
25         smb: make sure that we haven't gone past the end of the captured data.
26         smb: squelch an uninitialized complaint from coverity.
27         NFS: from NetBSD; don't interpret the reply as a possible NFS reply
28                 if it got MSG_DENIED.
29         BGP: don't print TLV values that didn't fit, from www.digit-labs.org. 
30         revised INSTALL.txt about libpcap dependancy.
32 Wed.    April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
33         Update man page to reflect changes to libpcap
34         Changes to both TCP and IP Printer Output
35         Fix a potential buffer overflow in the 802.11 printer
36         Print basic info about a few more Cisco LAN protocols.
37         mDNS cleanup
38         ICMP MPLS rework of the extension code
39         bugfix: use the correct codepoint for the OSPF simple text auth token
40          entry, and use safeputs to print the password.
41         Add support in pflog for additional values
42         Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
43         Add support for the Message-id NACK c-type.
44         Add support for 802.3ah loopback ctrl msg
45         Add support for Multiple-STP as per 802.1s
46         Add support for rapid-SPT as per 802.1w
47         Add support for CFM Link-trace msg, Link-trace-Reply msg, 
48          Sender-ID tlv, private tlv, port, interface status
49         Add support for unidirectional link detection as per
50          http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt
51         Add support for the olsr protocol as per RFC 3626 plus the LQ 
52          extensions from olsr.org
53         Add support for variable-length checksum in DCCP, as per section 9 of
54          RFC 4340.
55         Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
56         Add support for Multiple-STP as per 802.1s
57         Add support for the cisco propriatry 'dynamic trunking protocol'
58         Add support for the cisco proprietary VTP protocol
59         Update dhcp6 options table as per IETF standardization activities
62 Tue.    September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release
63         
64         Fix compiling on AIX (, at end of ENUM)
65         Updated list of DNS RR typecodes
66         Use local Ethernet defs on WIN32
67         Add support for Frame-Relay ARP
68         Fixes for compiling under MSVC++
69         Add support for parsing Juniper .pcap files
70         Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
71         Rework the OSPFv3 printer
72         Fix printing for 4.4BSD/NetBSD NFS Filehandles
73         Add support for Cisco style NLPID encapsulation
74         Add cisco prop. eigrp related, extended communities
75         Add support for BGP signaled VPLS
76         Cleanup the bootp printer
77         Add support for PPP over Frame-Relay
78         Add some bounds checking to the IP options code, and clean up 
79          the options output a bit.
80         Add additional modp groups to ISAKMP printer
81         Add support for Address-Withdraw and Label-Withdraw Msgs
82         Add support for the BFD Discriminator TLV
83         Fixes for 64bit compiling
84         Add support for PIMv2 checksum verification
85         Add support for further dissection of the IPCP Compression Option
86         Add support for Cisco's proposed VQP protocol
87         Add basic support for keyed authentication TCP option
88         Lots of minor cosmetic changes to output printers
91 Mon.    September 19, 2005.  ken@xelerance.com. Summary for 3.9.4 tcpdump release
92         Decoder support for more Juniper link-layer types
93         Fix a potential buffer overflow (although it can't occur in
94                 practice).
95         Fix the handling of unknown management frame types in the 802.11
96                 printer.
97         Add FRF.16 support, fix various Frame Relay bugs.
98         Add support for RSVP integrity objects, update fast-reroute
99                 object printer to latest spec.
100         Clean up documentation of vlan filter expression, document mpls
101                 filter expression.
102         Document new pppoed and pppoes filter expressions.
103         Update diffserver-TE codepoints as per RFC 4124.
104         Spelling fixes in ICMPv6.
105         Don't require any fields other than flags to be present in IS-IS
106                 restart signaling TLVs, and only print the system ID in
107                 those TLVs as system IDs, not as node IDs.
108         Support for DCCP.
110 Tue.    July 5, 2005.  ken@xelerance.com. Summary for 3.9.3 tcpdump release
112         Option to chroot() when dropping privs
113         Fixes for compiling on nearly every platform,
114                 including improved 64bit support
115         Many new testcases
116         Support for sending packets
117         Many compliation fixes on most platforms
118         Fixes for recent version of GCC to eliminate warnings
119         Improved Unicode support
121         Decoders & DLT Changes, Updates and New:
122                 AES ESP support
123                 Juniper ATM, FRF.15, FRF.16, PPPoE,
124                         ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC
125                         GGSN,ES,MONITOR,SERVICES
126                 L2VPN
127                 Axent Raptor/Symantec Firewall
128                 TCP-MD5 (RFC 2385)
129                 ESP-in-UDP (RFC 3948)
130                 ATM OAM
131                 LMP, LMP Service Discovery
132                 IP over FC
133                 IP over IEEE 1394
134                 BACnet MS/TP
135                 SS7
136                 LDP over TCP
137                 LACP, MARKER as per 802.3ad
138                 PGM (RFC 3208)
139                 LSP-PING
140                 G.7041/Y.1303 Generic Framing Procedure
141                 EIGRP-IP, EIGRP-IPX
142                 ICMP6
143                 Radio - via radiotap
144                 DHCPv6
145                 HDLC over PPP
147 Tue.   March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
149         No changes from 3.8.2. Version bumped only to maintain consistency
150         with libpcap 0.8.3.
152 Mon.   March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
154         Fixes for print-isakmp.c      CVE:    CAN-2004-0183, CAN-2004-0184
155                              http://www.rapid7.com/advisories/R7-0017.html
156         IP-over-IEEE1394 printing.
157         some MINGW32 changes.
158         updates for autoconf 2.5
159         fixes for print-aodv.c - check for too short packets
160         formatting changes to print-ascii for hex output.
161         check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c,
162                 print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c,
163                 print-ip.c, print-lwres.c, print-ospf.c, print-pim.c,
164                 print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c
165         print-ether.c - better handling of unknown types.
166         print-isoclns.c - additional decoding of types.
167         print-llc.c - strings for LLC names added.
168         print-pfloc.c - various enhancements
169         print-radius.c - better decoding to strings.
171 Wed.   November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release
173         changed syntax of -E argument so that multiple SAs can be decrypted
174         fixes for Digital Unix headers and Documentation
175         __attribute__ fixes
176         CDP changes from Terry Kennedy <terry@tmk.com>.
177         IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com>
178         Fixes for ASN.1 decoder for 2.100.3 forms.
179         Added a count of packets received and processed to clarify numbers.
180         Incorporated WinDUMP patches for Win32 builds.
181         PPPoE payload length headers.
182         Fixes for HP C compiler builds.
183         Use new pcap_breakloop() and pcap_findalldevs() if we can.
184         BGP output split into multiple lines.
185         Fixes to 802.11 decoding.
186         Fixes to PIM decoder.
187         SuperH is a CPU that can't handle unaligned access. Many fixes for
188                 unaligned access work.
189         Fixes to Frame-Relay decoder for Q.933/922 frames.
190         Clarified when Solaris can do captures as non-root.
191         Added tests/ subdir for examples/regression tests.
192         New -U flag.    -flush stdout after every packet
193         New -A flag     -print ascii only
194         support for decoding IS-IS inside Cisco HDLC Frames
195         more verbosity for tftp decoder
196         mDNS decoder
197         new BFD decoder
198         cross compilation patches
199         RFC 3561 AODV support.
200         UDP/TCP pseudo-checksum properly for source-route options.
201         sanitized all files to modified BSD license
202         Add support for RFC 2625 IP-over-Fibre Channel.
203         fixes for DECnet support.
204         Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI.
205         RFC 2684 encapsulation of BPDUs.
207 Tuesday, February 25, 2003. fenner@research.att.com.  3.7.2 release
209         Fixed infinite loop when parsing malformed isakmp packets.
210          (reported by iDefense; already fixed in CVS)
211         Fixed infinite loop when parsing malformed BGP packets.
212         Fixed buffer overflow with certain malformed NFS packets.
213         Pretty-print unprintable network names in 802.11 printer.
214         Handle truncated nbp (appletalk) packets.
215         Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt
216         Print IP protocol name even if we don't have a printer for it.
217         Print IP protocol name or number for fragments.
218         Print the whole MPLS label stack, not just the top label.
219         Print request header and file handle for NFS v3 FSINFO and PATHCONF
220          requests.
221         Fix NFS packet truncation checks.
222         Handle "old" DR-Priority and Bidir-Capable PIM HELLO options.
223         Handle unknown RADIUS attributes properly.
224         Fix an ASN.1 parsing error that would cause e.g. the OID
225          2.100.3 to be misrepresented as 4.20.3 .
227 Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release
228 see http://www.tcpdump.org/cvs-log/2002-01-21.10:16:48.html for commit log.
229         keyword "ipx" added.
230         Better OSI/802.2 support on Linux.
231         IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net.
232         LLC SAP support for FDDI/token ring/RFC-1483 style ATM
233         BXXP protocol was replaced by the BEEP protocol;
234         improvements to SNAP demux.
235         Changes to "any" interface documentation.
236         Documentation on pcap_stats() counters.
237         Fix a memory leak found by Miklos Szeredi - pcap_ether_aton().
238         Added MPLS encapsulation decoding per RFC3032.
239         DNS dissector handles TKEY, TSIG and IXFR.
240         adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org>
241         SMB printing has much improved bounds checks
242         OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging
243         Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>.
244         Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net>
245         IPX socket 0x85be is for Cisco EIGRP over IPX.
246         Improvements to fragmented ESP handling.
247         SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
248         Linux ARPHDR_ATM support fixed.
249         Added a "netbeui" keyword, which selects NetBEUI packets.
250         IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option.
251         Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>.
252         Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm"
253         Better Linux libc5 compat.
254         BIND9 lwres dissector added.
255         MIPS and SPARC get strict alignment macros (affects print-bgp.c)
256         Apple LocalTalk LINKTYPE_ reserved.
257         New time stamp formats documented.
258         DHCP6 updated to draft-22.txt spec.
259         ICMP types/codes now accept symbolic names.
260         Add SIGINFO handler from LBL
261         encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>.
262         now we are -Wstrict-prototype clean.
263         NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>.
264         PPPoE dissector cleaned up.
265         Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>.
266         In dissector, now the caller prints the IP addresses rather than proto.
267         cjclark@alum.mit.edu: print the IP proto for non-initial fragments.
268         LLC frames with a DSAP and LSAP of 0xe0 are IPX frames.
269         Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX.
270         captures on the "any" device won't be done in promiscuous mode
271         Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl>
272         ARCNet support, from NetBSD.
273         HSRP dissector, from Julian Cowley <julian@lava.net>.
274         Handle (GRE-encapsulated) PPTP
275         added -C option to rotate save file every optarg * 1,000,000 bytes.
276         support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>.
277         PPTP support, from Motonori Shindo <mshindo@mshindo.net>.
278         IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>.
279         CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>.
280         ESP printing updated to RFC2406.
281         HP-UX can now handle large number of PPAs.
282         MSDP printer added.
283         L2TP dissector improvements from Motonori Shindo.
285 Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release
286         Cleaned up documentation.
287         Promisc mode fixes for Linux
288         IPsec changes/cleanups.
289         Alignment fixes for picky architectures
291         Removed dependency on native headers for packet dissectors.
292         Removed Linux specific headers that were shipped
294         libpcap changes provide for exchanging capture files between
295           systems. Save files now have well known PACKET_ values instead of
296           depending upon system dependant mappings of DLT_* types.
298         Support for computing/checking IP and UDP/TCP checksums.
300         Updated autoconf stock files.
302         IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6,
304         Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp,
305                 timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk
307         Added filtering support for: VLANs, ESIS, ISIS
309         Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP,
310                 L2TP, PPPoE
312         HP-UX 11.0 -- find the right dlpi device.
313         Solaris 8 - IPv6 works
314         Linux - Added support for an "any" device to capture on all interfaces
316         Security fixes: buffer overrun audit done. Strcpy replaced with
317                 strlcpy, sprintf replaced with snprintf.
318         Look for lex problems, and warn about them.
321 v3.5 Fri Jan 28 18:00:00 PST 2000
323 Bill Fenner <fenner@research.att.com>
324 - switch to config.h for autoconf
325 - unify RCSID strings
326 - Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser
327 - Really fix the RIP printer
328 - Fix MAC address -> name translation.
329 - some -Wall -Wformat fixes
330 - update makemib to parse much of SMIv2
331 - Print TCP sequence # with -vv even if you normally wouldn't
332 - Print as much of IP/TCP/UDP headers as possible even if truncated.
334 itojun@iijlab.net
335 - -X will make a ascii dump.  from netbsd.
336 - telnet command sequence decoder (ff xx xx).  from netbsd.
337 - print-bgp.c: improve options printing.  ugly code exists for
338   unaligned option parsing (need some fix).
339 - const poisoning in SMB decoder.
340 - -Wall -Werror clean checks.
341 - bring in KAME IPv6/IPsec decoding code.
343 Assar Westerlund  <assar@sics.se>
344 - SNMPv2 and SNMPv3 printer
345 - If compiled with libsmi, tcpdump can load MIBs on the fly to decode
346   SNMP packets.
347 - Incorporate NFS parsing code from NetBSD.  Adds support for nfsv3.
348 - portability fixes
349 - permit building in different directories.
351 Ken Hornstein <kenh@cmf.nrl.navy.mil>
352 - bring in code at
353   /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing
354   AFS3 packets
356 Andrew Tridgell <tridge@linuxcare.com>
357 - SMB printing code
359 Love <lha@stacken.kth.se>
360 - print-rx.c: add code for printing MakeDir and StoreStatus.  Also
361   change date format to the right one.
363 Michael C. Richardson  <mcr@sandelman.ottawa.on.ca>
364 - Created tcpdump.org repository
366 v3.4 Sat Jul 25 12:40:55 PDT 1998
368 - Hardwire Linux slip support since it's too hard to detect.
370 - Redo configuration of "network" libraries (-lsocket and -lnsl) to
371   deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu)
373 - Added -a which tries to translate network and broadcast addresses to
374   names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl)
376 - Added a configure option to disable gcc.
378 - Added a "raw" packet printer.
380 - Not having an interface address is no longer fatal. Requested by John
381   Hawkinson.
383 - Rework signal setup to accommodate Linux.
385 - OSPF truncation check fix. Also display the type of OSPF packets
386   using MD5 authentication. Thanks to Brian Wellington
387   (bwelling@tis.com)
389 - Fix truncation check bugs in the Kerberos printer. Reported by Ezra
390   Peisach (epeisach@mit.edu)
392 - Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka
393   (plonka@mfa.com)
395 - Specify full install target as a way of detecting if install
396   directory does not exist. Thanks to Dave Plonka.
398 - Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie
399   (paul@vix.com)
401 - Fix off-by-one bug when testing size of ethernet packets. Thanks to
402   Marty Leisner (leisner@sdsp.mc.xerox.com)
404 - Add a local autoconf macro to check for routines in libraries; the
405   autoconf version is broken (it only puts the library name in the
406   cache variable name). Thanks to John Hawkinson.
408 - Add a local autoconf macro to check for types; the autoconf version
409   is broken (it uses grep instead of actually compiling a code fragment).
411 - Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
412   formats.
414 - Extend OSF ip header workaround to versions 1 and 2.
416 - Fix some signed problems in the nfs printer. As reported by David
417   Sacerdote (davids@silence.secnet.com)
419 - Detect group wheel and use it as the default since BSD/OS' install
420   can't hack numeric groups. Reported by David Sacerdote.
422 - AIX needs special loader options. Thanks to Jonathan I. Kamens
423   (jik@cam.ov.com)
425 - Fixed the nfs printer to print port numbers in decimal. Thanks to
426   Kent Vander Velden (graphix@iastate.edu)
428 - Find installed libpcap in /usr/local/lib when not using gcc.
430 - Disallow network masks with non-network bits set.
432 - Attempt to detect "egcs" versions of gcc.
434 - Add missing closing double quotes when displaying bootp strings.
435   Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca)
437 v3.3 Sat Nov 30 20:56:27 PST 1996
439 - Added Linux support.
441 - GRE encapsulated packet printer thanks to John Hawkinson
442   (jhawk@mit.edu)
444 - Rewrite gmt2local() to avoid problematic os dependencies.
446 - Suppress nfs truncation message on errors.
448 - Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro.
449   Reported by Joachim Ott (ott@ardala.han.de)
451 - Enable "ip_hl vs. ip_vhl" workaround for OSF4 too.
453 - Print arp hardware type in host order. Thanks to Onno van der Linden
454   (onno@simplex.nl)
456 - Avoid solaris compiler warnings. Thanks to Bruce Barnett
457   (barnett@grymoire.crd.ge.com)
459 - Fix rip printer to not print one more route than is actually in the
460   packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and
461   Bill Fenner (fenner@parc.xerox.com)
463 - Use autoconf endian detection since BYTE_ORDER isn't defined on all systems.
465 - Fix dvmrp printer truncation checks and add a dvmrp probe printer.
466   Thanks to Danny J. Mitzel (mitzel@ipsilon.com)
468 - Rewrite ospf printer to improve truncation checks.
470 - Don't parse tcp options past the EOL. As noted by David Sacerdote
471   (davids@secnet.com). Also, check tcp options to make sure they ar
472   actually in the tcp header (in addition to the normal truncation
473   checks). Fix the SACK code to print the N blocks (instead of the
474   first block N times).
476 - Don't say really small UDP packets are truncated just because they
477   aren't big enough to be a RPC. As noted by David Sacerdote.
479 v3.2.1 Sun Jul 14 03:02:26 PDT 1996
481 - Added rfc1716 icmp codes as suggested by Martin Fredriksson
482   (martin@msp.se)
484 - Print mtu for icmp unreach need frag packets. Thanks to John
485   Hawkinson (jhawk@mit.edu)
487 - Decode icmp router discovery messages. Thanks to Jeffrey Honig
488   (jch@bsdi.com)
490 - Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida
491   (kushida@trl.ibm.co.jp)
493 - Check igmp checksum if possible. Thanks to John Hawkinson.
495 - Made changes for SINIX. Thanks to Andrej Borsenkow
496   (borsenkow.msk@sni.de)
498 - Use autoconf's idea of the top level directory in install targets.
499   Thanks to John Hawkinson.
501 - Avoid infinite loop in tcp options printing code. Thanks to Jeffrey
502   Mogul (mogul@pa.dec.com)
504 - Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop.
505   Thanks to John Hawkinson.
507 - Added some more packet truncation checks.
509 - On systems that have it, use sigset() instead of signal() since
510   signal() has different semantics on these systems.
512 - Fixed some more alignment problems on the alpha.
514 - Add code to massage unprintable characters in the domain and ipx
515   printers. Thanks to John Hawkinson.
517 - Added explicit netmask support. Thanks to Steve Nuchia
518   (steve@research.oknet.com)
520 - Add "sca" keyword (for DEC cluster services) as suggested by Terry
521   Kennedy (terry@spcvxa.spc.edu)
523 - Add "atalk" keyword as suggested by John Hawkinson.
525 - Added an igrp printer. Thanks to Francis Dupont
526   (francis.dupont@inria.fr)
528 - Print IPX net numbers in hex a la Novell Netware. Thanks to Terry
529   Kennedy (terry@spcvxa.spc.edu)
531 - Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin
532   (pascal.hennequin@hugo.int-evry.fr)
534 - Added some ETHERTYPEs missing on some systems.
536 - Added truncated packet macros and various checks.
538 - Fixed endian problems with the DECnet printer.
540 - Use $CC when checking gcc version. Thanks to Carl Lindberg
541   (carl_lindberg@blacksmith.com)
543 - Fixes for AIX (although this system is not yet supported). Thanks to
544   John Hawkinson.
546 - Fix bugs in the autoconf misaligned accesses code fragment.
548 - Include sys/param.h to get BYTE_ORDER in a few places. Thanks to
549   Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp)
551 v3.2 Sun Jun 23 02:28:10 PDT 1996
553 - Print new icmp unreachable codes as suggested by Martin Fredriksson
554   (martin@msp.se). Also print code value when unknown for icmp redirect
555   and time exceeded.
557 - Fix an alignment endian bug in getname(). Thanks to John Hawkinson.
559 - Define "new" domain record types if not found in arpa/nameserv.h.
560   Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also
561   fixed an endian bug when printing mx record and added some new record
562   types.
564 - Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com)
566 - Added T/TCP options printing. As suggested by Richard Stevens
567   (rstevens@noao.edu)
569 - Use autoconf to detect architectures that can't handle misaligned
570   accesses.
572 v3.1 Thu Jun 13 20:59:32 PDT 1996
574 - Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd
575   and bind (as suggested by Charles Hannum).
577 - Port to GNU autoconf.
579 - Add support for printing DVMRP and PIM traffic thanks to
580   Havard Eidnes (Havard.Eidnes@runit.sintef.no).
582 - Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian
583   define being referenced. Reported by Terry Kennedy.
585 - Minor fixes to the man page thanks to Mark Andrews.
587 - Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah
588   (bmah@cs.berkeley.edu).
590 - Added support for new dns types, thanks to Rainer Orth.
592 - Fixed tftp_print() to print the block number for ACKs.
594 - Document -dd and -ddd. Resulted from a bug report from Charlie Slater
595   (cslater@imatek.com).
597 - Check return status from malloc/calloc/etc.
599 - Check return status from pcap_loop() so we can print an error and
600   exit with a bad status if there were problems.
602 - Bail if ip option length is <= 0. Resulted from a bug report from
603   Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au).
605 - Print out a little more information for sun rpc packets.
607 - Add suport for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu).
609 - Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were
610   wrong on little endian machines).
612 - Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford
613   (crawdad@fnal.gov).
615 - Fix ntp_print() to not print garbage when the stratum is
616   "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com).
618 - Rewrote tcp options printer code to check for truncation. Added
619   selective acknowledgment case.
621 - Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig
622   (jch@bsdi.com)
624 - Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one
625   octet for the sa_family member. Thanks to Yoshitaka Tokugawa
626   (toku@dit.co.jp)
628 - Don't checksum ip header if we don't have all of it. Thanks to John
629   Hawkinson (jhawk@mit.edu).
631 - Print out hostnames if possible in egp printer. Thanks to Jeffrey
632   Honig (jhc@bsdi.com)
635 v3.1a1 Wed May  3 19:21:11 PDT 1995
637 - Include time.h when SVR4 is defined to avoid problems under Solaris
638   2.3.
640 - Fix etheraddr_string() in the ETHER_SERVICE to return the saved
641   strings, not the local buffer. Thanks to Stefan Petri
642   (petri@ibr.cs.tu-bs.de).
644 - Detect when pcap raises the snaplen (e.g. with snit). Print a warning
645   that the selected value was not used. Thanks to Pascal Hennequin
646   (Pascal.Hennequin@hugo.int-evry.fr).
648 - Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin.
650 - BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu).
652 v3.0.3 Sun Oct  1 18:35:00 GMT 1995
654 - Although there never was a 3.0.3 release, the linux boys cleverly
655   "released" one in late 1995.
657 v3.0.2 Thu Apr 20 21:28:16 PDT 1995
659 - Change configuration to not use gcc v2 flags with gcc v1.
661 - Redo gmt2local() so that it works under BSDI (which seems to return
662   an empty timezone struct from gettimeofday()). Based on report from
663   Terry Kennedy (terry@spcvxa.spc.edu).
665 - Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based
666   on report from Mark Andrews (mandrews@alias.com).
668 - Don't pass cc flags to gcc. Resulted from a bug report from Rainer
669   Orth (ro@techfak.uni-bielefeld.de).
671 - Fixed printout of connection id for uncompressed tcp slip packets.
672   Resulted from a bug report from Richard Stevens (rstevens@noao.edu).
674 - Hack around deficiency in Ultrix's make.
676 - Add ETHERTYPE_TRAIL define which is missing from irix5.
678 v3.0.1 Wed Aug 31 22:42:26 PDT 1994
680 - Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4.
682 v3.0 Mon Jun 20 19:23:27 PDT 1994
684 - Added support for printing tcp option timestamps thanks to
685   Mark Andrews (mandrews@alias.com).
687 - Reorganize protocol dumpers to take const pointers to packets so they
688   never change the contents (i.e., they used to do endian conversions
689   in place).  Previously, whenever more than one pass was taken over
690   the packet, the packet contents would be dumped incorrectly (i.e.,
691   the output form -x would be wrong on little endian machines because
692   the protocol dumpers would modify the data).  Thanks to Charles Hannum
693   (mycroft@gnu.ai.mit.edu) for reporting this problem.
695 - Added support for decnet protocol dumping thanks to Jeff Mogul
696   (mogul@pa.dec.com).
698 - Fix bug that caused length of packet to be incorrectly printed
699   (off by ether header size) for unknown ethernet types thanks
700   to Greg Miller (gmiller@kayak.mitre.org).
702 - Added support for IPX protocol dumping thanks to Brad Parker
703   (brad@fcr.com).
705 - Added check to verify IP header checksum under -v thanks to
706   Brad Parker (brad@fcr.com).
708 - Move packet capture code to new libpcap library (which is
709   packaged separately).
711 - Prototype everything and assume an ansi compiler.
713 - print-arp.c: Print hardware ethernet addresses if they're not
714   what we expect.
716 - print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags.
717   Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com).
719 - print-fddi.c: Improvements. Thanks to Jeffrey Mogul
720   (mogul@pa.dec.com).
722 - print-icmp.c: Byte swap netmask before printing. Thanks to
723   Richard Stevens (rstevens@noao.edu). Print icmp type when unknown.
725 - print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets.
726   By default, only the inner packet is dumped, appended with the token
727   "(encap)".  Under -v, both the inner and output packets are dumped
728   (on the same line).  Note that the filter applies to the original packet,
729   not the encapsulated packet.  So if you run tcpdump on a net with an
730   IP Multicast tunnel, you cannot filter out the datagrams using the
731   conventional syntax.  (You can filter away all the ip-in-ip traffic
732   with "not ip proto 4".)
734 - print-nfs.c: Keep pending rpc's in circular table. Add generic
735   nfs header and remove os dependences. Thanks to Jeffrey Mogul.
737 - print-ospf.c: Improvements. Thanks to Jeffrey Mogul.
739 - tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc"
740   (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords
741   Add && and || operators
743 v2.2.1 Tue Jun 6 17:57:22 PDT 1992
745 - Fix bug with -c flag.
747 v2.2 Fri May 22 17:19:41 PDT 1992
749 - savefile.c: Remove hack that shouldn't have been exported. Add
750   truncate checks.
752 - Added the 'icmp' keyword.  For example, 'icmp[0] != 8 and icmp[0] != 0'
753   matches non-echo/reply ICMP packets.
755 - Many improvements to filter code optimizer.
757 - Added 'multicast' keyword and extended the 'broadcast' keyword can now be
758   so that protocol qualifications are allowed. For example, "ip broadcast"
759   and "ether multicast" are valid filters.
761 - Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo').
762   Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel
763   patches to netinet/if_loop.c.
765 - Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS.
766   Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs.
768 - Added EGP and OSPF printers, thanks to Jeffrey Honig.
770 v2.1 Tue Jan 28 11:00:14 PST 1992
772 - Internal release (never publically exported).
774 v2.0.1 Sun Jan 26 21:10:10 PDT
776 - Various byte ordering fixes.
778 - Add truncation checks.
780 - inet.c: Support BSD style SIOCGIFCONF.
782 - nametoaddr.c: Handle multi addresses for single host.
784 - optimize.c: Rewritten.
786 - pcap-bpf.c: don't choke when we get ptraced. only set promiscuous
787   for broadcast nets.
789 - print-atal.c: Fix an alignment bug (thanks to
790   stanonik@nprdc.navy.mil) Add missing printf() argument.
792 - print-bootp.c: First attempt at decoding the vendor buffer.
794 - print-domain.c: Fix truncation checks.
796 - print-icmp.c: Calculate length of packets from the ip header.
798 - print-ip.c: Print frag id in decimal (so it's easier to match up
799   with non-frags). Add support for ospf, egp and igmp.
801 - print-nfs.c: Lots of changes.
803 - print-ntp.c: Make some verbose output depend on -v.
805 - print-snmp.c: New version from John LoVerso.
807 - print-tcp.c: Print rfc1072 tcp options.
809 - tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits
810   (microseconds) worth of precision. Fix uid bugs.
812 - A packet dumper has been added (thanks to Jeff Mogul of DECWRL).
813   With this option, you can create an architecture independent binary
814   trace file in real time, without the overhead of the packet printer.
815   At a later time, the packets can be filtered (again) and printed.
817 - BSD is supported.  You must have BPF in your kernel.
818   Since the filtering is now done in the kernel, fewer packets are
819   dropped.  In fact, with BPF and the packet dumper option, a measly
820   Sun 3/50 can keep up with a busy network.
822 - Compressed SLIP packets can now be dumped, provided you use our
823   SLIP software and BPF.  These packets are dumped as any other IP
824   packet; the compressed headers are dumped with the '-e' option.
826 - Machines with little-endian byte ordering are supported (thanks to
827   Jeff Mogul).
829 - Ultrix 4.0 is supported (also thanks to Jeff Mogul).
831 - IBM RT and Stanford Enetfilter support has been added by
832   Rayan Zachariassen <rayan@canet.ca>.  Tcpdump has been tested under
833   both the vanilla Enetfilter interface, and the extended interface
834   (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter.
836 - TFTP packets are now printed (requests only).
838 - BOOTP packets are now printed.
840 - SNMP packets are now printed. (thanks to John LoVerso of Xylogics).
842 - Sparc architectures, including the Sparcstation-1, are now
843   supported thanks to Steve McCanne and Craig Leres.
845 - SunOS 4 is now supported thanks to Micky Liu of Columbia
846   University (micky@cunixc.cc.columbia.edu).
848 - IP options are now printed.
850 - RIP packets are now printed.
852 - There's a -v flag that prints out more information than the
853   default (e.g., it will enable printing of IP ttl, tos and id)
854   and -q flag that prints out less (e.g., it will disable
855   interpretation of AppleTalk-in-UDP).
857 - The grammar has undergone substantial changes (if you have an
858   earlier version of tcpdump, you should re-read the manual
859   entry).
861   The most useful change is the addition of an expression
862   syntax that lets you filter on arbitrary fields or values in the
863   packet.  E.g., "ip[0] > 0x45" would print only packets with IP
864   options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN
865   packets.
867   The most painful change is that concatenation no longer means
868   "and" -- e.g., you have to say "host foo and port bar" instead
869   of "host foo port bar".  The up side to this down is that
870   repeated qualifiers can be omitted, making most filter
871   expressions shorter.  E.g., you can now say "ip host foo and
872   (bar or baz)" to look at ip traffic between hosts foo and bar or
873   between hosts foo and baz.  [The old way of saying this was "ip
874   host foo and (ip host bar or ip host baz)".]
876 v2.0 Sun Jan 13 12:20:40 PST 1991
878 - Initial public release.