1 /* $OpenBSD: src/sys/netbt/hci_unit.c,v 1.8 2008/02/24 21:34:48 uwe Exp $ */
2 /* $NetBSD: hci_unit.c,v 1.9 2007/12/30 18:26:42 plunky Exp $ */
5 * Copyright (c) 2005 Iain Hibbert.
6 * Copyright (c) 2006 Itronix Inc.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. The name of Itronix Inc. may not be used to endorse
18 * or promote products derived from this software without specific
19 * prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
25 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
27 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
28 * ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 * POSSIBILITY OF SUCH DAMAGE.
34 #include <sys/param.h>
36 #include <sys/device.h>
37 #include <sys/kernel.h>
38 #include <sys/malloc.h>
41 #include <sys/queue.h>
42 #include <sys/systm.h>
43 #include <sys/endian.h>
46 #include <net/netisr.h>
48 #include <netbt/bluetooth.h>
49 #include <netbt/hci.h>
51 struct hci_unit_list hci_unit_list
= TAILQ_HEAD_INITIALIZER(hci_unit_list
);
54 * HCI Input Queue max lengths.
56 int hci_eventq_max
= 20;
57 int hci_aclrxq_max
= 50;
58 int hci_scorxq_max
= 50;
59 int hci_cmdwait_max
= 50;
60 int hci_scodone_max
= 50;
63 * This is the default minimum command set supported by older
64 * devices. Anything conforming to 1.2 spec or later will get
65 * updated during init.
67 static const uint8_t hci_cmds_v10
[HCI_COMMANDS_SIZE
] = {
68 0xff, 0xff, 0xff, 0x01, 0xfe, 0xff, 0xff, 0xff,
69 0xff, 0xff, 0xff, 0x7f, 0x32, 0x03, 0xb8, 0xfe,
70 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
71 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
72 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
73 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
74 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
75 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
79 * bluetooth unit functions
83 hci_attach(const struct hci_if
*hci_if
, device_t dev
, uint16_t flags
)
85 struct hci_unit
*unit
;
87 KKASSERT(dev
!= NULL
);
88 KKASSERT(hci_if
->enable
!= NULL
);
89 KKASSERT(hci_if
->disable
!= NULL
);
90 KKASSERT(hci_if
->output_cmd
!= NULL
);
91 KKASSERT(hci_if
->output_acl
!= NULL
);
92 KKASSERT(hci_if
->output_sco
!= NULL
);
93 KKASSERT(hci_if
->get_stats
!= NULL
);
95 unit
= kmalloc(sizeof(struct hci_unit
), M_BLUETOOTH
, M_ZERO
| M_WAITOK
);
96 KKASSERT(unit
!= NULL
);
99 unit
->hci_if
= hci_if
;
100 unit
->hci_flags
= flags
;
102 lockinit(&unit
->hci_devlock
, "HCI device lock", 0, 0);
104 unit
->hci_eventq
.ifq_maxlen
= hci_eventq_max
;
105 unit
->hci_aclrxq
.ifq_maxlen
= hci_aclrxq_max
;
106 unit
->hci_scorxq
.ifq_maxlen
= hci_scorxq_max
;
107 unit
->hci_cmdwait
.ifq_maxlen
= hci_cmdwait_max
;
108 unit
->hci_scodone
.ifq_maxlen
= hci_scodone_max
;
110 TAILQ_INIT(&unit
->hci_links
);
111 LIST_INIT(&unit
->hci_memos
);
114 TAILQ_INSERT_TAIL(&hci_unit_list
, unit
, hci_next
);
121 hci_detach(struct hci_unit
*unit
)
126 TAILQ_REMOVE(&hci_unit_list
, unit
, hci_next
);
129 kfree(unit
, M_BLUETOOTH
);
133 hci_enable(struct hci_unit
*unit
)
138 * Bluetooth spec says that a device can accept one
139 * command on power up until they send a Command Status
140 * or Command Complete event with more information, but
141 * it seems that some devices cant and prefer to send a
142 * No-op Command Status packet when they are ready.
144 unit
->hci_num_cmd_pkts
= (unit
->hci_flags
& BTF_POWER_UP_NOOP
) ? 0 : 1;
145 unit
->hci_num_acl_pkts
= 0;
146 unit
->hci_num_sco_pkts
= 0;
149 * only allow the basic packet types until
150 * the features report is in
152 unit
->hci_acl_mask
= HCI_PKT_DM1
| HCI_PKT_DH1
;
153 unit
->hci_packet_type
= unit
->hci_acl_mask
;
155 memcpy(unit
->hci_cmds
, hci_cmds_v10
, HCI_COMMANDS_SIZE
);
156 err
= (*unit
->hci_if
->enable
)(unit
->hci_dev
);
160 unit
->hci_flags
|= BTF_RUNNING
;
163 * Reset the device, this will trigger initialisation
167 unit
->hci_flags
|= BTF_INIT
;
170 err
= hci_send_cmd(unit
, HCI_CMD_RESET
, NULL
, 0);
174 while (unit
->hci_flags
& BTF_INIT
) {
175 err
= tsleep(unit
, PCATCH
, "hciena", 5 * hz
);
180 * "What If", while we were sleeping, the device
181 * was removed and detached? Ho Hum.
187 * Attach Bluetooth Device Hub
189 unit
->hci_bthub
= NULL
;
191 unit
->hci_bthub
= device_add_child(unit
->hci_softc
, "bthub", -1);
192 if (!unit
->hci_bthub
) {
193 device_printf(unit
->hci_softc
, "Device creation failed\n");
197 DPRINTFN(10, "%s is added as child to %s\n",
198 device_get_nameunit(unit
->hci_bthub
),
199 device_get_nameunit(unit
->hci_softc
));
201 device_set_desc(unit
->hci_bthub
,"Bluetooth Device Hub");
203 device_set_ivars(unit
->hci_bthub
, &unit
->hci_bdaddr
);
205 device_probe_and_attach(unit
->hci_bthub
);
210 (*unit
->hci_if
->disable
)(unit
->hci_dev
);
211 unit
->hci_flags
&= ~BTF_RUNNING
;
218 hci_disable(struct hci_unit
*unit
)
220 struct hci_link
*link
, *next
;
221 struct hci_memo
*memo
;
225 if (unit
->hci_bthub
) {
226 device_delete_child(unit
->hci_softc
, unit
->hci_bthub
);
227 unit
->hci_bthub
= NULL
;
231 (*unit
->hci_if
->disable
)(unit
->hci_dev
);
232 unit
->hci_flags
&= ~BTF_RUNNING
;
235 * close down any links, take care to close SCO first since
236 * they may depend on ACL links.
238 for (acl
= 0 ; acl
< 2 ; acl
++) {
239 next
= TAILQ_FIRST(&unit
->hci_links
);
240 while ((link
= next
) != NULL
) {
241 next
= TAILQ_NEXT(link
, hl_next
);
242 if (acl
|| link
->hl_type
!= HCI_LINK_ACL
)
243 hci_link_free(link
, ECONNABORTED
);
247 while ((memo
= LIST_FIRST(&unit
->hci_memos
)) != NULL
)
250 /* (no need to hold hci_devlock, the driver is disabled) */
252 IF_DRAIN(&unit
->hci_eventq
);
253 unit
->hci_eventqlen
= 0;
255 IF_DRAIN(&unit
->hci_aclrxq
);
256 unit
->hci_aclrxqlen
= 0;
258 IF_DRAIN(&unit
->hci_scorxq
);
259 unit
->hci_scorxqlen
= 0;
261 IF_DRAIN(&unit
->hci_cmdwait
);
262 IF_DRAIN(&unit
->hci_scodone
);
266 hci_unit_lookup(bdaddr_t
*addr
)
268 struct hci_unit
*unit
;
270 TAILQ_FOREACH(unit
, &hci_unit_list
, hci_next
) {
271 if ((unit
->hci_flags
& BTF_UP
) == 0)
274 if (bdaddr_same(&unit
->hci_bdaddr
, addr
))
282 * construct and queue a HCI command packet
285 hci_send_cmd(struct hci_unit
*unit
, uint16_t opcode
, void *buf
, uint8_t len
)
290 KKASSERT(unit
!= NULL
);
292 m
= m_gethdr(M_NOWAIT
, MT_DATA
);
296 p
= mtod(m
, hci_cmd_hdr_t
*);
297 p
->type
= HCI_CMD_PKT
;
298 p
->opcode
= htole16(opcode
);
300 m
->m_pkthdr
.len
= m
->m_len
= sizeof(hci_cmd_hdr_t
);
301 M_SETCTX(m
, NULL
); /* XXX is this needed? */
304 KKASSERT(buf
!= NULL
);
306 m_copyback(m
, sizeof(hci_cmd_hdr_t
), len
, buf
);
307 if (m
->m_pkthdr
.len
!= (sizeof(hci_cmd_hdr_t
) + len
)) {
313 DPRINTFN(2, "(%s) opcode (%3.3x|%4.4x)\n",
314 device_get_nameunit(unit
->hci_dev
),
315 HCI_OGF(opcode
), HCI_OCF(opcode
));
318 if (unit
->hci_num_cmd_pkts
== 0)
319 IF_ENQUEUE(&unit
->hci_cmdwait
, m
);
321 hci_output_cmd(unit
, m
);
327 * Incoming packet processing. Since the code is single threaded
328 * in any case (IPL_SOFTNET), we handle it all in one interrupt function
329 * picking our way through more important packets first so that hopefully
330 * we will never get clogged up with bulk data.
335 struct hci_unit
*unit
= arg
;
339 lockmgr(&unit
->hci_devlock
, LK_EXCLUSIVE
);
341 if (unit
->hci_eventqlen
> 0) {
342 IF_DEQUEUE(&unit
->hci_eventq
, m
);
343 unit
->hci_eventqlen
--;
344 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
348 DPRINTFN(10, "(%s) recv event, len = %d\n",
349 device_get_nameunit(unit
->hci_dev
), m
->m_pkthdr
.len
);
351 m
->m_flags
|= IFF_LINK0
; /* mark incoming packet */
358 if (unit
->hci_scorxqlen
> 0) {
359 IF_DEQUEUE(&unit
->hci_scorxq
, m
);
360 unit
->hci_scorxqlen
--;
361 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
364 DPRINTFN(10, "(%s) recv SCO, len = %d\n",
365 device_get_nameunit(unit
->hci_dev
), m
->m_pkthdr
.len
);
367 m
->m_flags
|= IFF_LINK0
; /* mark incoming packet */
369 hci_sco_recv(m
, unit
);
374 if (unit
->hci_aclrxqlen
> 0) {
375 IF_DEQUEUE(&unit
->hci_aclrxq
, m
);
376 unit
->hci_aclrxqlen
--;
377 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
381 DPRINTFN(10, "(%s) recv ACL, len = %d\n",
382 device_get_nameunit(unit
->hci_dev
), m
->m_pkthdr
.len
);
384 m
->m_flags
|= IFF_LINK0
; /* mark incoming packet */
386 hci_acl_recv(m
, unit
);
391 IF_DEQUEUE(&unit
->hci_scodone
, m
);
393 struct hci_link
*link
;
394 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
396 DPRINTFN(11, "(%s) complete SCO\n",
397 device_get_nameunit(unit
->hci_dev
));
399 TAILQ_FOREACH(link
, &unit
->hci_links
, hl_next
) {
400 if (link
== M_GETCTX(m
, struct hci_link
*)) {
401 hci_sco_complete(link
, 1);
406 unit
->hci_num_sco_pkts
++;
412 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
414 DPRINTFN(10, "done\n");
417 /**********************************************************************
421 * input & complete routines will be called from device drivers,
422 * possibly in interrupt context. We return success or failure to
423 * enable proper accounting but we own the mbuf.
427 hci_input_event(struct hci_unit
*unit
, struct mbuf
*m
)
431 lockmgr(&unit
->hci_devlock
, LK_EXCLUSIVE
);
433 if (unit
->hci_eventqlen
> hci_eventq_max
) {
434 DPRINTF("(%s) dropped event packet.\n",
435 device_get_nameunit(unit
->hci_dev
));
439 unit
->hci_eventqlen
++;
440 IF_ENQUEUE(&unit
->hci_eventq
, m
);
441 netisr_queue(NETISR_BLUETOOTH
, m
);
444 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
450 hci_input_acl(struct hci_unit
*unit
, struct mbuf
*m
)
454 lockmgr(&unit
->hci_devlock
, LK_EXCLUSIVE
);
455 if (unit
->hci_aclrxqlen
> hci_aclrxq_max
) {
456 DPRINTF("(%s) dropped ACL packet.\n",
457 device_get_nameunit(unit
->hci_dev
));
461 unit
->hci_aclrxqlen
++;
462 IF_ENQUEUE(&unit
->hci_aclrxq
, m
);
463 netisr_queue(NETISR_BLUETOOTH
, m
);
466 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
472 hci_input_sco(struct hci_unit
*unit
, struct mbuf
*m
)
476 lockmgr(&unit
->hci_devlock
, LK_EXCLUSIVE
);
477 if (unit
->hci_scorxqlen
> hci_scorxq_max
) {
478 DPRINTF("(%s) dropped SCO packet.\n",
479 device_get_nameunit(unit
->hci_dev
));
483 unit
->hci_scorxqlen
++;
484 IF_ENQUEUE(&unit
->hci_scorxq
, m
);
485 netisr_queue(NETISR_BLUETOOTH
, m
);
488 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);
494 hci_output_cmd(struct hci_unit
*unit
, struct mbuf
*m
)
500 DPRINTFN(10, "(%s) num_cmd_pkts=%d\n",
501 device_get_nameunit(unit
->hci_dev
), unit
->hci_num_cmd_pkts
);
503 unit
->hci_num_cmd_pkts
--;
506 * If context is set, this was from a HCI raw socket
507 * and a record needs to be dropped from the sockbuf.
509 arg
= M_GETCTX(m
, void *);
513 (*unit
->hci_if
->output_cmd
)(unit
->hci_dev
, m
);
517 hci_output_acl(struct hci_unit
*unit
, struct mbuf
*m
)
521 DPRINTFN(10, "(%s) num_acl_pkts=%d\n",
522 device_get_nameunit(unit
->hci_dev
), unit
->hci_num_acl_pkts
);
524 unit
->hci_num_acl_pkts
--;
526 (*unit
->hci_if
->output_acl
)(unit
->hci_dev
, m
);
530 hci_output_sco(struct hci_unit
*unit
, struct mbuf
*m
)
534 DPRINTFN(10, "(%s) num_sco_pkts=%d\n",
535 device_get_nameunit(unit
->hci_dev
), unit
->hci_num_sco_pkts
);
537 unit
->hci_num_sco_pkts
--;
539 (*unit
->hci_if
->output_sco
)(unit
->hci_dev
, m
);
543 hci_complete_sco(struct hci_unit
*unit
, struct mbuf
*m
)
545 lockmgr(&unit
->hci_devlock
, LK_EXCLUSIVE
);
546 IF_ENQUEUE(&unit
->hci_scodone
, m
);
547 netisr_queue(NETISR_BLUETOOTH
,m
);
548 lockmgr(&unit
->hci_devlock
, LK_RELEASE
);