* Remove the remains of the obsolete timeout()/untimeout() interface.
[dragonfly.git] / sys / netinet6 / udp6_output.c
blobb5a40af4317bbc5b72335b527b552f1e8b80d9c4
1 /* $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $ */
2 /* $DragonFly: src/sys/netinet6/udp6_output.c,v 1.8 2006/12/29 18:02:56 victor Exp $ */
3 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
5 /*
6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7 * All rights reserved.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
35 * Copyright (c) 1982, 1986, 1989, 1993
36 * The Regents of the University of California. All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the University of
49 * California, Berkeley and its contributors.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64 * SUCH DAMAGE.
66 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/syslog.h>
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
90 #include <netinet/in.h>
91 #include <netinet/in_var.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/ip_var.h>
95 #include <netinet/in_pcb.h>
96 #include <netinet/udp.h>
97 #include <netinet/udp_var.h>
98 #include <netinet/ip6.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/in6_pcb.h>
101 #include <netinet6/udp6_var.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/ip6protosw.h>
105 #ifdef IPSEC
106 #include <netinet6/ipsec.h>
107 #ifdef INET6
108 #include <netinet6/ipsec6.h>
109 #endif
110 #endif /* IPSEC */
112 #include <net/net_osdep.h>
115 * UDP protocol inplementation.
116 * Per RFC 768, August, 1980.
119 #define in6pcb inpcb
120 #define udp6stat udpstat
121 #define udp6s_opackets udps_opackets
124 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
125 struct mbuf *control, struct thread *td)
127 u_int32_t ulen = m->m_pkthdr.len;
128 u_int32_t plen = sizeof(struct udphdr) + ulen;
129 struct ip6_hdr *ip6;
130 struct udphdr *udp6;
131 struct in6_addr *laddr, *faddr;
132 u_short fport;
133 int error = 0;
134 struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
135 int priv;
136 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
137 int flags;
138 struct sockaddr_in6 tmp;
140 priv = !suser(td); /* 1 if privilaged, 0 if not */
141 if (control) {
142 if ((error = ip6_setpktoptions(control, &opt, priv, 0)) != 0)
143 goto release;
144 in6p->in6p_outputopts = &opt;
147 if (addr6) {
149 * IPv4 version of udp_output calls in_pcbconnect in this case,
150 * which needs splnet and affects performance.
151 * Since we saw no essential reason for calling in_pcbconnect,
152 * we get rid of such kind of logic, and call in6_selectsrc
153 * and in6_pcbsetport in order to fill in the local address
154 * and the local port.
156 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
157 if (sin6->sin6_port == 0) {
158 error = EADDRNOTAVAIL;
159 goto release;
162 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
163 /* how about ::ffff:0.0.0.0 case? */
164 error = EISCONN;
165 goto release;
167 if (!prison_remote_ip(td, (struct sockaddr *)addr6)) {
168 error = EAFNOSUPPORT; /* IPv4 only jail */
169 goto release;
172 /* protect *sin6 from overwrites */
173 tmp = *sin6;
174 sin6 = &tmp;
176 faddr = &sin6->sin6_addr;
177 fport = sin6->sin6_port; /* allow 0 port */
179 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
180 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
182 * I believe we should explicitly discard the
183 * packet when mapped addresses are disabled,
184 * rather than send the packet as an IPv6 one.
185 * If we chose the latter approach, the packet
186 * might be sent out on the wire based on the
187 * default route, the situation which we'd
188 * probably want to avoid.
189 * (20010421 jinmei@kame.net)
191 error = EINVAL;
192 goto release;
193 } else
194 af = AF_INET;
197 /* KAME hack: embed scopeid */
198 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
199 error = EINVAL;
200 goto release;
203 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
204 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
205 in6p->in6p_moptions,
206 &in6p->in6p_route,
207 &in6p->in6p_laddr, &error, NULL);
208 } else
209 laddr = &in6p->in6p_laddr; /* XXX */
210 if (laddr == NULL) {
211 if (error == 0)
212 error = EADDRNOTAVAIL;
213 goto release;
215 if (in6p->in6p_lport == 0 &&
216 (error = in6_pcbsetport(laddr, in6p, td)) != 0)
217 goto release;
218 } else {
219 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
220 error = ENOTCONN;
221 goto release;
223 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
224 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
226 * XXX: this case would happen when the
227 * application sets the V6ONLY flag after
228 * connecting the foreign address.
229 * Such applications should be fixed,
230 * so we bark here.
232 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
233 "option was set for a connected socket\n");
234 error = EINVAL;
235 goto release;
236 } else
237 af = AF_INET;
239 laddr = &in6p->in6p_laddr;
240 faddr = &in6p->in6p_faddr;
241 fport = in6p->in6p_fport;
244 if (af == AF_INET)
245 hlen = sizeof(struct ip);
248 * Calculate data length and get a mbuf
249 * for UDP and IP6 headers.
251 M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
252 if (m == 0) {
253 error = ENOBUFS;
254 goto release;
258 * Stuff checksum and output datagram.
260 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
261 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
262 udp6->uh_dport = fport;
263 if (plen <= 0xffff)
264 udp6->uh_ulen = htons((u_short)plen);
265 else
266 udp6->uh_ulen = 0;
267 udp6->uh_sum = 0;
269 switch (af) {
270 case AF_INET6:
271 ip6 = mtod(m, struct ip6_hdr *);
272 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
273 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
274 ip6->ip6_vfc |= IPV6_VERSION;
275 #if 0 /* ip6_plen will be filled in ip6_output. */
276 ip6->ip6_plen = htons((u_short)plen);
277 #endif
278 ip6->ip6_nxt = IPPROTO_UDP;
279 ip6->ip6_hlim = in6_selecthlim(in6p,
280 in6p->in6p_route.ro_rt ?
281 in6p->in6p_route.ro_rt->rt_ifp : NULL);
282 ip6->ip6_src = *laddr;
283 ip6->ip6_dst = *faddr;
285 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
286 sizeof(struct ip6_hdr), plen)) == 0) {
287 udp6->uh_sum = 0xffff;
290 flags = 0;
292 udp6stat.udp6s_opackets++;
293 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
294 flags, in6p->in6p_moptions, NULL, in6p);
295 break;
296 case AF_INET:
297 error = EAFNOSUPPORT;
298 goto release;
300 goto releaseopt;
302 release:
303 m_freem(m);
305 releaseopt:
306 if (control) {
307 ip6_clearpktopts(in6p->in6p_outputopts, 0, -1);
308 in6p->in6p_outputopts = stickyopt;
309 m_freem(control);
311 return (error);