2 * Copyright (c) 2004 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * Copyright (c) 1989, 1993
35 * The Regents of the University of California. All rights reserved.
36 * (c) UNIX System Laboratories, Inc.
37 * All or some portions of this file are derived from material licensed
38 * to the University of California by American Telephone and Telegraph
39 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
40 * the permission of UNIX System Laboratories, Inc.
42 * Redistribution and use in source and binary forms, with or without
43 * modification, are permitted provided that the following conditions
45 * 1. Redistributions of source code must retain the above copyright
46 * notice, this list of conditions and the following disclaimer.
47 * 2. Redistributions in binary form must reproduce the above copyright
48 * notice, this list of conditions and the following disclaimer in the
49 * documentation and/or other materials provided with the distribution.
50 * 3. All advertising materials mentioning features or use of this software
51 * must display the following acknowledgement:
52 * This product includes software developed by the University of
53 * California, Berkeley and its contributors.
54 * 4. Neither the name of the University nor the names of its contributors
55 * may be used to endorse or promote products derived from this software
56 * without specific prior written permission.
58 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
70 * $DragonFly: src/sys/kern/vfs_mount.c,v 1.29 2007/11/06 03:49:58 dillon Exp $
74 * External virtual filesystem routines
78 #include <sys/param.h>
79 #include <sys/systm.h>
80 #include <sys/kernel.h>
81 #include <sys/malloc.h>
82 #include <sys/mount.h>
84 #include <sys/vnode.h>
86 #include <sys/eventhandler.h>
87 #include <sys/kthread.h>
88 #include <sys/sysctl.h>
90 #include <machine/limits.h>
93 #include <sys/thread2.h>
94 #include <sys/sysref2.h>
97 #include <vm/vm_object.h>
99 struct mountscan_info
{
100 TAILQ_ENTRY(mountscan_info
) msi_entry
;
102 struct mount
*msi_node
;
105 struct vmntvnodescan_info
{
106 TAILQ_ENTRY(vmntvnodescan_info
) entry
;
110 static int vnlru_nowhere
= 0;
111 SYSCTL_INT(_debug
, OID_AUTO
, vnlru_nowhere
, CTLFLAG_RD
,
113 "Number of times the vnlru process ran without success");
116 static struct lwkt_token mntid_token
;
118 /* note: mountlist exported to pstat */
119 struct mntlist mountlist
= TAILQ_HEAD_INITIALIZER(mountlist
);
120 static TAILQ_HEAD(,mountscan_info
) mountscan_list
;
121 static struct lwkt_token mountlist_token
;
122 static TAILQ_HEAD(,vmntvnodescan_info
) mntvnodescan_list
;
123 struct lwkt_token mntvnode_token
;
125 static TAILQ_HEAD(,bio_ops
) bio_ops_list
= TAILQ_HEAD_INITIALIZER(bio_ops_list
);
128 * Called from vfsinit()
133 lwkt_token_init(&mountlist_token
);
134 lwkt_token_init(&mntvnode_token
);
135 lwkt_token_init(&mntid_token
);
136 TAILQ_INIT(&mountscan_list
);
137 TAILQ_INIT(&mntvnodescan_list
);
141 * Support function called with mntvnode_token held to remove a vnode
142 * from the mountlist. We must update any list scans which are in progress.
145 vremovevnodemnt(struct vnode
*vp
)
147 struct vmntvnodescan_info
*info
;
149 TAILQ_FOREACH(info
, &mntvnodescan_list
, entry
) {
151 info
->vp
= TAILQ_NEXT(vp
, v_nmntvnodes
);
153 TAILQ_REMOVE(&vp
->v_mount
->mnt_nvnodelist
, vp
, v_nmntvnodes
);
157 * Support function called with mntvnode_token held to move a vnode to
158 * the end of the list.
161 vmovevnodetoend(struct mount
*mp
, struct vnode
*vp
)
164 TAILQ_INSERT_TAIL(&mp
->mnt_nvnodelist
, vp
, v_nmntvnodes
);
169 * Allocate a new vnode and associate it with a tag, mount point, and
172 * A VX locked and refd vnode is returned. The caller should setup the
173 * remaining fields and vx_put() or, if he wishes to leave a vref,
174 * vx_unlock() the vnode.
177 getnewvnode(enum vtagtype tag
, struct mount
*mp
,
178 struct vnode
**vpp
, int lktimeout
, int lkflags
)
182 KKASSERT(mp
!= NULL
);
184 vp
= allocvnode(lktimeout
, lkflags
);
189 * By default the vnode is assigned the mount point's normal
192 vp
->v_ops
= &mp
->mnt_vn_use_ops
;
195 * Placing the vnode on the mount point's queue makes it visible.
196 * VNON prevents it from being messed with, however.
201 * A VX locked & refd vnode is returned.
208 * This function creates vnodes with special operations vectors. The
209 * mount point is optional.
211 * This routine is being phased out.
214 getspecialvnode(enum vtagtype tag
, struct mount
*mp
,
215 struct vop_ops
**ops
,
216 struct vnode
**vpp
, int lktimeout
, int lkflags
)
220 vp
= allocvnode(lktimeout
, lkflags
);
226 * Placing the vnode on the mount point's queue makes it visible.
227 * VNON prevents it from being messed with, however.
232 * A VX locked & refd vnode is returned.
239 * Interlock against an unmount, return 0 on success, non-zero on failure.
241 * The passed flag may be 0 or LK_NOWAIT and is only used if an unmount
244 * If no unmount is in-progress LK_NOWAIT is ignored. No other flag bits
245 * are used. A shared locked will be obtained and the filesystem will not
246 * be unmountable until the lock is released.
249 vfs_busy(struct mount
*mp
, int flags
)
253 if (mp
->mnt_kern_flag
& MNTK_UNMOUNT
) {
254 if (flags
& LK_NOWAIT
)
256 /* XXX not MP safe */
257 mp
->mnt_kern_flag
|= MNTK_MWAIT
;
259 * Since all busy locks are shared except the exclusive
260 * lock granted when unmounting, the only place that a
261 * wakeup needs to be done is at the release of the
262 * exclusive lock at the end of dounmount.
264 tsleep((caddr_t
)mp
, 0, "vfs_busy", 0);
268 if (lockmgr(&mp
->mnt_lock
, lkflags
))
269 panic("vfs_busy: unexpected lock failure");
274 * Free a busy filesystem.
277 vfs_unbusy(struct mount
*mp
)
279 lockmgr(&mp
->mnt_lock
, LK_RELEASE
);
283 * Lookup a filesystem type, and if found allocate and initialize
284 * a mount structure for it.
286 * Devname is usually updated by mount(8) after booting.
289 vfs_rootmountalloc(char *fstypename
, char *devname
, struct mount
**mpp
)
291 struct vfsconf
*vfsp
;
294 if (fstypename
== NULL
)
296 for (vfsp
= vfsconf
; vfsp
; vfsp
= vfsp
->vfc_next
) {
297 if (!strcmp(vfsp
->vfc_name
, fstypename
))
302 mp
= kmalloc(sizeof(struct mount
), M_MOUNT
, M_WAITOK
);
303 bzero((char *)mp
, (u_long
)sizeof(struct mount
));
304 lockinit(&mp
->mnt_lock
, "vfslock", VLKTIMEOUT
, 0);
305 vfs_busy(mp
, LK_NOWAIT
);
306 TAILQ_INIT(&mp
->mnt_nvnodelist
);
307 TAILQ_INIT(&mp
->mnt_reservedvnlist
);
308 TAILQ_INIT(&mp
->mnt_jlist
);
309 mp
->mnt_nvnodelistsize
= 0;
311 mp
->mnt_op
= vfsp
->vfc_vfsops
;
312 mp
->mnt_flag
= MNT_RDONLY
;
313 vfsp
->vfc_refcount
++;
314 mp
->mnt_iosize_max
= DFLTPHYS
;
315 mp
->mnt_stat
.f_type
= vfsp
->vfc_typenum
;
316 mp
->mnt_flag
|= vfsp
->vfc_flags
& MNT_VISFLAGMASK
;
317 strncpy(mp
->mnt_stat
.f_fstypename
, vfsp
->vfc_name
, MFSNAMELEN
);
318 copystr(devname
, mp
->mnt_stat
.f_mntfromname
, MNAMELEN
- 1, 0);
324 * Lookup a mount point by filesystem identifier.
327 vfs_getvfs(fsid_t
*fsid
)
332 lwkt_gettoken(&ilock
, &mountlist_token
);
333 TAILQ_FOREACH(mp
, &mountlist
, mnt_list
) {
334 if (mp
->mnt_stat
.f_fsid
.val
[0] == fsid
->val
[0] &&
335 mp
->mnt_stat
.f_fsid
.val
[1] == fsid
->val
[1]) {
339 lwkt_reltoken(&ilock
);
344 * Get a new unique fsid. Try to make its val[0] unique, since this value
345 * will be used to create fake device numbers for stat(). Also try (but
346 * not so hard) make its val[0] unique mod 2^16, since some emulators only
347 * support 16-bit device numbers. We end up with unique val[0]'s for the
348 * first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
350 * Keep in mind that several mounts may be running in parallel. Starting
351 * the search one past where the previous search terminated is both a
352 * micro-optimization and a defense against returning the same fsid to
356 vfs_getnewfsid(struct mount
*mp
)
358 static u_int16_t mntid_base
;
363 lwkt_gettoken(&ilock
, &mntid_token
);
364 mtype
= mp
->mnt_vfc
->vfc_typenum
;
365 tfsid
.val
[1] = mtype
;
366 mtype
= (mtype
& 0xFF) << 24;
368 tfsid
.val
[0] = makeudev(255,
369 mtype
| ((mntid_base
& 0xFF00) << 8) | (mntid_base
& 0xFF));
371 if (vfs_getvfs(&tfsid
) == NULL
)
374 mp
->mnt_stat
.f_fsid
.val
[0] = tfsid
.val
[0];
375 mp
->mnt_stat
.f_fsid
.val
[1] = tfsid
.val
[1];
376 lwkt_reltoken(&ilock
);
380 * This routine is called when we have too many vnodes. It attempts
381 * to free <count> vnodes and will potentially free vnodes that still
382 * have VM backing store (VM backing store is typically the cause
383 * of a vnode blowout so we want to do this). Therefore, this operation
384 * is not considered cheap.
386 * A number of conditions may prevent a vnode from being reclaimed.
387 * the buffer cache may have references on the vnode, a directory
388 * vnode may still have references due to the namei cache representing
389 * underlying files, or the vnode may be in active use. It is not
390 * desireable to reuse such vnodes. These conditions may cause the
391 * number of vnodes to reach some minimum value regardless of what
392 * you set kern.maxvnodes to. Do not set kern.maxvnodes too low.
396 * This is a quick non-blocking check to determine if the vnode is a good
397 * candidate for being (eventually) vgone()'d. Returns 0 if the vnode is
398 * not a good candidate, 1 if it is.
401 vmightfree(struct vnode
*vp
, int page_count
)
403 if (vp
->v_flag
& VRECLAIMED
)
406 if ((vp
->v_flag
& VFREE
) && TAILQ_EMPTY(&vp
->v_namecache
))
409 if (sysref_isactive(&vp
->v_sysref
))
411 if (vp
->v_object
&& vp
->v_object
->resident_page_count
>= page_count
)
417 * The vnode was found to be possibly vgone()able and the caller has locked it
418 * (thus the usecount should be 1 now). Determine if the vnode is actually
419 * vgone()able, doing some cleanups in the process. Returns 1 if the vnode
420 * can be vgone()'d, 0 otherwise.
422 * Note that v_auxrefs may be non-zero because (A) this vnode is not a leaf
423 * in the namecache topology and (B) this vnode has buffer cache bufs.
424 * We cannot remove vnodes with non-leaf namecache associations. We do a
425 * tentitive leaf check prior to attempting to flush out any buffers but the
426 * 'real' test when all is said in done is that v_auxrefs must become 0 for
427 * the vnode to be freeable.
429 * We could theoretically just unconditionally flush when v_auxrefs != 0,
430 * but flushing data associated with non-leaf nodes (which are always
431 * directories), just throws it away for no benefit. It is the buffer
432 * cache's responsibility to choose buffers to recycle from the cached
433 * data point of view.
436 visleaf(struct vnode
*vp
)
438 struct namecache
*ncp
;
440 TAILQ_FOREACH(ncp
, &vp
->v_namecache
, nc_vnode
) {
441 if (!TAILQ_EMPTY(&ncp
->nc_list
))
448 * Try to clean up the vnode to the point where it can be vgone()'d, returning
449 * 0 if it cannot be vgone()'d (or already has been), 1 if it can. Unlike
450 * vmightfree() this routine may flush the vnode and block. Vnodes marked
451 * VFREE are still candidates for vgone()ing because they may hold namecache
452 * resources and could be blocking the namecache directory hierarchy (and
453 * related vnodes) from being freed.
456 vtrytomakegoneable(struct vnode
*vp
, int page_count
)
458 if (vp
->v_flag
& VRECLAIMED
)
460 if (vp
->v_sysref
.refcnt
> 1)
462 if (vp
->v_object
&& vp
->v_object
->resident_page_count
>= page_count
)
464 if (vp
->v_auxrefs
&& visleaf(vp
)) {
465 vinvalbuf(vp
, V_SAVE
, 0, 0);
467 kprintf((vp
->v_auxrefs
? "vrecycle: vp %p failed: %s\n" :
468 "vrecycle: vp %p succeeded: %s\n"), vp
,
469 (TAILQ_FIRST(&vp
->v_namecache
) ?
470 TAILQ_FIRST(&vp
->v_namecache
)->nc_name
: "?"));
475 * This sequence may seem a little strange, but we need to optimize
476 * the critical path a bit. We can't recycle vnodes with other
477 * references and because we are trying to recycle an otherwise
478 * perfectly fine vnode we have to invalidate the namecache in a
479 * way that avoids possible deadlocks (since the vnode lock is being
480 * held here). Finally, we have to check for other references one
481 * last time in case something snuck in during the inval.
483 if (vp
->v_sysref
.refcnt
> 1 || vp
->v_auxrefs
!= 0)
485 if (cache_inval_vp_nonblock(vp
))
487 return (vp
->v_sysref
.refcnt
<= 1 && vp
->v_auxrefs
== 0);
491 * Reclaim up to 1/10 of the vnodes associated with a mount point. Try
492 * to avoid vnodes which have lots of resident pages (we are trying to free
493 * vnodes, not memory).
495 * This routine is a callback from the mountlist scan. The mount point
496 * in question will be busied.
499 vlrureclaim(struct mount
*mp
, void *data
)
507 int trigger_mult
= vnlru_nowhere
;
510 * Calculate the trigger point for the resident pages check. The
511 * minimum trigger value is approximately the number of pages in
512 * the system divded by the number of vnodes. However, due to
513 * various other system memory overheads unrelated to data caching
514 * it is a good idea to double the trigger (at least).
516 * trigger_mult starts at 0. If the recycler is having problems
517 * finding enough freeable vnodes it will increase trigger_mult.
518 * This should not happen in normal operation, even on machines with
519 * low amounts of memory, but extraordinary memory use by the system
520 * verses the amount of cached data can trigger it.
522 usevnodes
= desiredvnodes
;
525 trigger
= vmstats
.v_page_count
* (trigger_mult
+ 2) / usevnodes
;
528 lwkt_gettoken(&ilock
, &mntvnode_token
);
529 count
= mp
->mnt_nvnodelistsize
/ 10 + 1;
530 while (count
&& (vp
= TAILQ_FIRST(&mp
->mnt_nvnodelist
)) != NULL
) {
534 * The VP will stick around while we hold mntvnode_token,
535 * at least until we block, so we can safely do an initial
536 * check, and then must check again after we lock the vnode.
538 if (vp
->v_type
== VNON
|| /* syncer or indeterminant */
539 !vmightfree(vp
, trigger
) /* critical path opt */
541 vmovevnodetoend(mp
, vp
);
547 * VX get the candidate vnode. If the VX get fails the
548 * vnode might still be on the mountlist. Our loop depends
549 * on us at least cycling the vnode to the end of the
552 if (vx_get_nonblock(vp
) != 0) {
553 if (vp
->v_mount
== mp
)
554 vmovevnodetoend(mp
, vp
);
560 * Since we blocked locking the vp, make sure it is still
561 * a candidate for reclamation. That is, it has not already
562 * been reclaimed and only has our VX reference associated
565 if (vp
->v_type
== VNON
|| /* syncer or indeterminant */
566 (vp
->v_flag
& VRECLAIMED
) ||
568 !vtrytomakegoneable(vp
, trigger
) /* critical path opt */
570 if (vp
->v_mount
== mp
)
571 vmovevnodetoend(mp
, vp
);
578 * All right, we are good, move the vp to the end of the
579 * mountlist and clean it out. The vget will have returned
580 * an error if the vnode was destroyed (VRECLAIMED set), so we
581 * do not have to check again. The vput() will move the
582 * vnode to the free list if the vgone() was successful.
584 KKASSERT(vp
->v_mount
== mp
);
585 vmovevnodetoend(mp
, vp
);
591 lwkt_reltoken(&ilock
);
596 * Attempt to recycle vnodes in a context that is always safe to block.
597 * Calling vlrurecycle() from the bowels of file system code has some
598 * interesting deadlock problems.
600 static struct thread
*vnlruthread
;
601 static int vnlruproc_sig
;
604 vnlru_proc_wait(void)
606 if (vnlruproc_sig
== 0) {
607 vnlruproc_sig
= 1; /* avoid unnecessary wakeups */
610 tsleep(&vnlruproc_sig
, 0, "vlruwk", hz
);
616 struct thread
*td
= curthread
;
619 EVENTHANDLER_REGISTER(shutdown_pre_sync
, shutdown_kproc
, td
,
624 kproc_suspend_loop();
627 * Try to free some vnodes if we have too many
629 if (numvnodes
> desiredvnodes
&&
630 freevnodes
> desiredvnodes
* 2 / 10) {
631 int count
= numvnodes
- desiredvnodes
;
633 if (count
> freevnodes
/ 100)
634 count
= freevnodes
/ 100;
637 freesomevnodes(count
);
641 * Nothing to do if most of our vnodes are already on
644 if (numvnodes
- freevnodes
<= desiredvnodes
* 9 / 10) {
646 wakeup(&vnlruproc_sig
);
647 tsleep(td
, 0, "vlruwt", hz
);
651 done
= mountlist_scan(vlrureclaim
, NULL
, MNTSCAN_FORWARD
);
654 * The vlrureclaim() call only processes 1/10 of the vnodes
655 * on each mount. If we couldn't find any repeat the loop
656 * at least enough times to cover all available vnodes before
657 * we start sleeping. Complain if the failure extends past
658 * 30 second, every 30 seconds.
662 if (vnlru_nowhere
% 10 == 0)
663 tsleep(td
, 0, "vlrup", hz
* 3);
664 if (vnlru_nowhere
% 100 == 0)
665 kprintf("vnlru_proc: vnode recycler stopped working!\n");
666 if (vnlru_nowhere
== 1000)
676 * MOUNTLIST FUNCTIONS
680 * mountlist_insert (MP SAFE)
682 * Add a new mount point to the mount list.
685 mountlist_insert(struct mount
*mp
, int how
)
689 lwkt_gettoken(&ilock
, &mountlist_token
);
690 if (how
== MNTINS_FIRST
)
691 TAILQ_INSERT_HEAD(&mountlist
, mp
, mnt_list
);
693 TAILQ_INSERT_TAIL(&mountlist
, mp
, mnt_list
);
694 lwkt_reltoken(&ilock
);
698 * mountlist_interlock (MP SAFE)
700 * Execute the specified interlock function with the mountlist token
701 * held. The function will be called in a serialized fashion verses
702 * other functions called through this mechanism.
705 mountlist_interlock(int (*callback
)(struct mount
*), struct mount
*mp
)
710 lwkt_gettoken(&ilock
, &mountlist_token
);
711 error
= callback(mp
);
712 lwkt_reltoken(&ilock
);
717 * mountlist_boot_getfirst (DURING BOOT ONLY)
719 * This function returns the first mount on the mountlist, which is
720 * expected to be the root mount. Since no interlocks are obtained
721 * this function is only safe to use during booting.
725 mountlist_boot_getfirst(void)
727 return(TAILQ_FIRST(&mountlist
));
731 * mountlist_remove (MP SAFE)
733 * Remove a node from the mountlist. If this node is the next scan node
734 * for any active mountlist scans, the active mountlist scan will be
735 * adjusted to skip the node, thus allowing removals during mountlist
739 mountlist_remove(struct mount
*mp
)
741 struct mountscan_info
*msi
;
744 lwkt_gettoken(&ilock
, &mountlist_token
);
745 TAILQ_FOREACH(msi
, &mountscan_list
, msi_entry
) {
746 if (msi
->msi_node
== mp
) {
747 if (msi
->msi_how
& MNTSCAN_FORWARD
)
748 msi
->msi_node
= TAILQ_NEXT(mp
, mnt_list
);
750 msi
->msi_node
= TAILQ_PREV(mp
, mntlist
, mnt_list
);
753 TAILQ_REMOVE(&mountlist
, mp
, mnt_list
);
754 lwkt_reltoken(&ilock
);
758 * mountlist_scan (MP SAFE)
760 * Safely scan the mount points on the mount list. Unless otherwise
761 * specified each mount point will be busied prior to the callback and
762 * unbusied afterwords. The callback may safely remove any mount point
763 * without interfering with the scan. If the current callback
764 * mount is removed the scanner will not attempt to unbusy it.
766 * If a mount node cannot be busied it is silently skipped.
768 * The callback return value is aggregated and a total is returned. A return
769 * value of < 0 is not aggregated and will terminate the scan.
771 * MNTSCAN_FORWARD - the mountlist is scanned in the forward direction
772 * MNTSCAN_REVERSE - the mountlist is scanned in reverse
773 * MNTSCAN_NOBUSY - the scanner will make the callback without busying
777 mountlist_scan(int (*callback
)(struct mount
*, void *), void *data
, int how
)
779 struct mountscan_info info
;
786 lwkt_gettoken(&ilock
, &mountlist_token
);
789 info
.msi_node
= NULL
; /* paranoia */
790 TAILQ_INSERT_TAIL(&mountscan_list
, &info
, msi_entry
);
795 if (how
& MNTSCAN_FORWARD
) {
796 info
.msi_node
= TAILQ_FIRST(&mountlist
);
797 while ((mp
= info
.msi_node
) != NULL
) {
798 if (how
& MNTSCAN_NOBUSY
) {
799 count
= callback(mp
, data
);
800 } else if (vfs_busy(mp
, LK_NOWAIT
) == 0) {
801 count
= callback(mp
, data
);
802 if (mp
== info
.msi_node
)
810 if (mp
== info
.msi_node
)
811 info
.msi_node
= TAILQ_NEXT(mp
, mnt_list
);
813 } else if (how
& MNTSCAN_REVERSE
) {
814 info
.msi_node
= TAILQ_LAST(&mountlist
, mntlist
);
815 while ((mp
= info
.msi_node
) != NULL
) {
816 if (how
& MNTSCAN_NOBUSY
) {
817 count
= callback(mp
, data
);
818 } else if (vfs_busy(mp
, LK_NOWAIT
) == 0) {
819 count
= callback(mp
, data
);
820 if (mp
== info
.msi_node
)
828 if (mp
== info
.msi_node
)
829 info
.msi_node
= TAILQ_PREV(mp
, mntlist
, mnt_list
);
832 TAILQ_REMOVE(&mountscan_list
, &info
, msi_entry
);
833 lwkt_reltoken(&ilock
);
838 * MOUNT RELATED VNODE FUNCTIONS
841 static struct kproc_desc vnlru_kp
= {
846 SYSINIT(vnlru
, SI_SUB_KTHREAD_UPDATE
, SI_ORDER_FIRST
, kproc_start
, &vnlru_kp
)
849 * Move a vnode from one mount queue to another.
852 insmntque(struct vnode
*vp
, struct mount
*mp
)
856 lwkt_gettoken(&ilock
, &mntvnode_token
);
858 * Delete from old mount point vnode list, if on one.
860 if (vp
->v_mount
!= NULL
) {
861 KASSERT(vp
->v_mount
->mnt_nvnodelistsize
> 0,
862 ("bad mount point vnode list size"));
864 vp
->v_mount
->mnt_nvnodelistsize
--;
867 * Insert into list of vnodes for the new mount point, if available.
869 if ((vp
->v_mount
= mp
) == NULL
) {
870 lwkt_reltoken(&ilock
);
873 TAILQ_INSERT_TAIL(&mp
->mnt_nvnodelist
, vp
, v_nmntvnodes
);
874 mp
->mnt_nvnodelistsize
++;
875 lwkt_reltoken(&ilock
);
880 * Scan the vnodes under a mount point and issue appropriate callbacks.
882 * The fastfunc() callback is called with just the mountlist token held
883 * (no vnode lock). It may not block and the vnode may be undergoing
884 * modifications while the caller is processing it. The vnode will
885 * not be entirely destroyed, however, due to the fact that the mountlist
886 * token is held. A return value < 0 skips to the next vnode without calling
887 * the slowfunc(), a return value > 0 terminates the loop.
889 * The slowfunc() callback is called after the vnode has been successfully
890 * locked based on passed flags. The vnode is skipped if it gets rearranged
891 * or destroyed while blocking on the lock. A non-zero return value from
892 * the slow function terminates the loop. The slow function is allowed to
893 * arbitrarily block. The scanning code guarentees consistency of operation
894 * even if the slow function deletes or moves the node, or blocks and some
895 * other thread deletes or moves the node.
901 int (*fastfunc
)(struct mount
*mp
, struct vnode
*vp
, void *data
),
902 int (*slowfunc
)(struct mount
*mp
, struct vnode
*vp
, void *data
),
905 struct vmntvnodescan_info info
;
909 int maxcount
= 1000000;
911 lwkt_gettoken(&ilock
, &mntvnode_token
);
913 info
.vp
= TAILQ_FIRST(&mp
->mnt_nvnodelist
);
914 TAILQ_INSERT_TAIL(&mntvnodescan_list
, &info
, entry
);
915 while ((vp
= info
.vp
) != NULL
) {
917 panic("maxcount reached during vmntvnodescan");
919 if (vp
->v_type
== VNON
) /* visible but not ready */
921 KKASSERT(vp
->v_mount
== mp
);
924 * Quick test. A negative return continues the loop without
925 * calling the slow test. 0 continues onto the slow test.
926 * A positive number aborts the loop.
929 if ((r
= fastfunc(mp
, vp
, data
)) < 0)
936 * Get a vxlock on the vnode, retry if it has moved or isn't
937 * in the mountlist where we expect it.
944 error
= vget(vp
, LK_EXCLUSIVE
);
946 case VMSC_GETVP
|VMSC_NOWAIT
:
947 error
= vget(vp
, LK_EXCLUSIVE
|LK_NOWAIT
);
960 * Do not call the slow function if the vnode is
961 * invalid or if it was ripped out from under us
962 * while we (potentially) blocked.
964 if (info
.vp
== vp
&& vp
->v_type
!= VNON
)
965 r
= slowfunc(mp
, vp
, data
);
972 case VMSC_GETVP
|VMSC_NOWAIT
:
986 * Iterate. If the vnode was ripped out from under us
987 * info.vp will already point to the next vnode, otherwise
988 * we have to obtain the next valid vnode ourselves.
992 info
.vp
= TAILQ_NEXT(vp
, v_nmntvnodes
);
994 TAILQ_REMOVE(&mntvnodescan_list
, &info
, entry
);
995 lwkt_reltoken(&ilock
);
1000 * Remove any vnodes in the vnode table belonging to mount point mp.
1002 * If FORCECLOSE is not specified, there should not be any active ones,
1003 * return error if any are found (nb: this is a user error, not a
1004 * system error). If FORCECLOSE is specified, detach any active vnodes
1007 * If WRITECLOSE is set, only flush out regular file vnodes open for
1010 * SKIPSYSTEM causes any vnodes marked VSYSTEM to be skipped.
1012 * `rootrefs' specifies the base reference count for the root vnode
1013 * of this filesystem. The root vnode is considered busy if its
1014 * v_sysref.refcnt exceeds this value. On a successful return, vflush()
1015 * will call vrele() on the root vnode exactly rootrefs times.
1016 * If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
1020 static int busyprt
= 0; /* print out busy vnodes */
1021 SYSCTL_INT(_debug
, OID_AUTO
, busyprt
, CTLFLAG_RW
, &busyprt
, 0, "");
1024 static int vflush_scan(struct mount
*mp
, struct vnode
*vp
, void *data
);
1026 struct vflush_info
{
1033 vflush(struct mount
*mp
, int rootrefs
, int flags
)
1035 struct thread
*td
= curthread
; /* XXX */
1036 struct vnode
*rootvp
= NULL
;
1038 struct vflush_info vflush_info
;
1041 KASSERT((flags
& (SKIPSYSTEM
| WRITECLOSE
)) == 0,
1042 ("vflush: bad args"));
1044 * Get the filesystem root vnode. We can vput() it
1045 * immediately, since with rootrefs > 0, it won't go away.
1047 if ((error
= VFS_ROOT(mp
, &rootvp
)) != 0)
1052 vflush_info
.busy
= 0;
1053 vflush_info
.flags
= flags
;
1054 vflush_info
.td
= td
;
1055 vmntvnodescan(mp
, VMSC_GETVX
, NULL
, vflush_scan
, &vflush_info
);
1057 if (rootrefs
> 0 && (flags
& FORCECLOSE
) == 0) {
1059 * If just the root vnode is busy, and if its refcount
1060 * is equal to `rootrefs', then go ahead and kill it.
1062 KASSERT(vflush_info
.busy
> 0, ("vflush: not busy"));
1063 KASSERT(rootvp
->v_sysref
.refcnt
>= rootrefs
, ("vflush: rootrefs"));
1064 if (vflush_info
.busy
== 1 && rootvp
->v_sysref
.refcnt
== rootrefs
) {
1066 vgone_vxlocked(rootvp
);
1068 vflush_info
.busy
= 0;
1071 if (vflush_info
.busy
)
1073 for (; rootrefs
> 0; rootrefs
--)
1079 * The scan callback is made with an VX locked vnode.
1082 vflush_scan(struct mount
*mp
, struct vnode
*vp
, void *data
)
1084 struct vflush_info
*info
= data
;
1088 * Skip over a vnodes marked VSYSTEM.
1090 if ((info
->flags
& SKIPSYSTEM
) && (vp
->v_flag
& VSYSTEM
)) {
1095 * If WRITECLOSE is set, flush out unlinked but still open
1096 * files (even if open only for reading) and regular file
1097 * vnodes open for writing.
1099 if ((info
->flags
& WRITECLOSE
) &&
1100 (vp
->v_type
== VNON
||
1101 (VOP_GETATTR(vp
, &vattr
) == 0 &&
1102 vattr
.va_nlink
> 0)) &&
1103 (vp
->v_writecount
== 0 || vp
->v_type
!= VREG
)) {
1108 * If we are the only holder (refcnt of 1) or the vnode is in
1109 * termination (refcnt < 0), we can vgone the vnode.
1111 if (vp
->v_sysref
.refcnt
<= 1) {
1117 * If FORCECLOSE is set, forcibly close the vnode. For block
1118 * or character devices, revert to an anonymous device. For
1119 * all other files, just kill them.
1121 if (info
->flags
& FORCECLOSE
) {
1122 if (vp
->v_type
!= VBLK
&& vp
->v_type
!= VCHR
) {
1125 vclean_vxlocked(vp
, 0);
1126 vp
->v_ops
= &spec_vnode_vops_p
;
1127 insmntque(vp
, NULL
);
1133 vprint("vflush: busy vnode", vp
);
1140 add_bio_ops(struct bio_ops
*ops
)
1142 TAILQ_INSERT_TAIL(&bio_ops_list
, ops
, entry
);
1146 rem_bio_ops(struct bio_ops
*ops
)
1148 TAILQ_REMOVE(&bio_ops_list
, ops
, entry
);
1152 * This calls the bio_ops io_sync function either for a mount point
1155 * WARNING: softdeps is weirdly coded and just isn't happy unless
1156 * io_sync is called with a NULL mount from the general syncing code.
1159 bio_ops_sync(struct mount
*mp
)
1161 struct bio_ops
*ops
;
1164 if ((ops
= mp
->mnt_bioops
) != NULL
)
1167 TAILQ_FOREACH(ops
, &bio_ops_list
, entry
) {