Make CAM_NEW_TRAN_CODE default.

[dragonfly.git] / sys / dev / raid / twa / twa_cam.c

/*-
 * Copyright (c) 2003-04 3ware, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      $FreeBSD$
 * $DragonFly: src/sys/dev/raid/twa/twa_cam.c,v 1.9 2008/02/10 00:01:03 pavalos Exp $
 */

/*
 * 3ware driver for 9000 series storage controllers.
 *
 * Author: Vinod Kashyap
 */


#include "twa_includes.h"

#include <bus/cam/cam.h>
#include <bus/cam/cam_ccb.h>
#include <bus/cam/cam_sim.h>
#include <bus/cam/cam_xpt_sim.h>
#include <bus/cam/cam_xpt_periph.h>
#include <bus/cam/cam_debug.h>
#include <bus/cam/cam_periph.h>

#include <bus/cam/scsi/scsi_all.h>
#include <bus/cam/scsi/scsi_message.h>

static int      twa_execute_scsi(struct twa_request *tr, union ccb *ccb);
static void     twa_action(struct cam_sim *sim, union ccb *ccb);
static void     twa_poll(struct cam_sim *sim);
static void     twa_async(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg);
static void     twa_bus_scan_cb(struct cam_periph *periph, union ccb *ccb);



/*
 * Function name:       twa_cam_setup
 * Description:         Attaches the driver to CAM.
 *
 * Input:               sc      -- ptr to per ctlr structure
 * Output:              None
 * Return value:        0       -- success
 *                      non-zero-- failure
 */
int
twa_cam_setup(struct twa_softc *sc)
{
        struct cam_devq         *devq;
        struct ccb_setasync     csa;

        twa_dbg_dprint(3, sc, "sc = %p", sc);
        /*
         * Create the device queue for our SIM.
         */
        devq = cam_simq_alloc(TWA_Q_LENGTH);
        if (devq == NULL)
                return(ENOMEM);

        /*
         * Create a SIM entry.  Though we can support TWA_Q_LENGTH simultaneous
         * requests, we claim to be able to handle only (TWA_Q_LENGTH - 1), so
         * that we always have a request packet available to service attention
         * interrupts.
         */
        twa_dbg_dprint(3, sc, "Calling cam_sim_alloc");
        sc->twa_sim = cam_sim_alloc(twa_action, twa_poll, "twa", sc,
                                        device_get_unit(sc->twa_bus_dev),
                                        TWA_Q_LENGTH - 1, 1, devq);
        cam_simq_release(devq);
        if (sc->twa_sim == NULL) {
                return(ENOMEM);
        }

        /*
         * Register the bus.
         */
        twa_dbg_dprint(3, sc, "Calling xpt_bus_register");
        if (xpt_bus_register(sc->twa_sim, 0) != CAM_SUCCESS) {
                cam_sim_free(sc->twa_sim);
                sc->twa_sim = NULL; /* so twa_cam_detach will not try to free it */
                return(ENXIO);
        }

        twa_dbg_dprint(3, sc, "Calling xpt_create_path");
        if (xpt_create_path(&sc->twa_path, NULL,
                                cam_sim_path(sc->twa_sim),
                                CAM_TARGET_WILDCARD,
                                CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
                xpt_bus_deregister(cam_sim_path (sc->twa_sim));
                cam_sim_free(sc->twa_sim); /* passing TRUE will free the devq as well */
                return(ENXIO);
        }

        twa_dbg_dprint(3, sc, "Calling xpt_setup_ccb");
        xpt_setup_ccb(&csa.ccb_h, sc->twa_path, 5);
        csa.ccb_h.func_code = XPT_SASYNC_CB;
        csa.event_enable = AC_FOUND_DEVICE | AC_LOST_DEVICE;
        csa.callback = twa_async;
        csa.callback_arg = sc;
        xpt_action((union ccb *)&csa);

        twa_dbg_dprint(3, sc, "Calling twa_request_bus_scan");
        /*
         * Request a bus scan, so that CAM gets to know of
         * the logical units that we control.
         */
        twa_request_bus_scan(sc);
        twa_dbg_dprint(3, sc, "Exiting");
        return(0);
}



/*
 * Function name:       twa_cam_detach
 * Description:         Detaches the driver from CAM.
 *
 * Input:               sc      -- ptr to per ctlr structure
 * Output:              None
 * Return value:        None
 */
void
twa_cam_detach(struct twa_softc *sc)
{
        if (sc->twa_path)
                xpt_free_path(sc->twa_path);
        if (sc->twa_sim) {
                xpt_bus_deregister(cam_sim_path(sc->twa_sim));
                cam_sim_free(sc->twa_sim); /* passing TRUE will free the devq as well */
        }
}



/*
 * Function name:       twa_send_scsi_cmd
 * Description:         Sends down a scsi cmd to fw.
 *
 * Input:               tr      -- ptr to request pkt
 *                      cmd     -- opcode of scsi cmd to send
 * Output:              None
 * Return value:        0       -- success
 *                      non-zero-- failure
 */
int
twa_send_scsi_cmd(struct twa_request *tr, int cmd)
{
        union ccb       ccb;

        bzero(&ccb, sizeof(union ccb));
        ccb.csio.cdb_io.cdb_bytes[0] = (u_int8_t)cmd;
        ccb.csio.cdb_io.cdb_bytes[4] = 128;
        ccb.csio.cdb_len = 16;
        ccb.csio.data_ptr = kmalloc(TWA_SECTOR_SIZE, M_DEVBUF, M_INTWAIT|M_ZERO);
        ccb.csio.dxfer_len = TWA_SECTOR_SIZE;

        ccb.ccb_h.target_id = 0;
        ccb.ccb_h.flags |= CAM_DIR_IN;

        if (twa_execute_scsi(tr, &ccb))
                return(EIO);
        return(0);
}



/*
 * Function name:       twa_execute_scsi
 * Description:         Build a fw cmd, based on a CAM style ccb, and
 *                      send it down.
 *
 * Input:               tr      -- ptr to request pkt
 *                      ccb     -- ptr to CAM style ccb
 * Output:              None
 * Return value:        0       -- success
 *                      non-zero-- failure
 */
int
twa_execute_scsi(struct twa_request *tr, union ccb *ccb)
{
        struct twa_softc                *sc = tr->tr_sc;
        struct twa_command_packet       *cmdpkt;
        struct twa_command_9k           *cmd9k;
        struct ccb_hdr                  *ccb_h = &(ccb->ccb_h);
        struct ccb_scsiio               *csio = &(ccb->csio);
        int                             error;

        twa_dbg_dprint(3, sc, "SCSI I/O request 0x%x", 
                                csio->cdb_io.cdb_bytes[0]);

        if (ccb_h->target_id >= TWA_MAX_UNITS) {
                twa_dbg_dprint(3, sc, "Invalid target. PTL = %x %x %x",
                        ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
                ccb_h->status |= CAM_TID_INVALID;
                if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL)
                        xpt_done(ccb);
                return(1);
        }
        if (ccb_h->target_lun != 0) {
                twa_dbg_dprint(3, sc, "Invalid lun. PTL = %x %x %x",
                        ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
                ccb_h->status |= CAM_LUN_INVALID;
                if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL)
                        xpt_done(ccb);
                return(1);
        }

        if(ccb_h->flags & CAM_CDB_PHYS) {
                twa_printf(sc, "Physical CDB address!\n");
                ccb_h->status = CAM_REQ_CMP_ERR;
                if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL)
                        xpt_done(ccb);
                return(1);
        }

        /*
         * We are going to work on this request.  Mark it as enqueued (though
         * we don't actually queue it...)
         */
        ccb_h->status |= CAM_SIM_QUEUED;

        if((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
                if(ccb_h->flags & CAM_DIR_IN)
                        tr->tr_flags |= TWA_CMD_DATA_IN;
                else
                        tr->tr_flags |= TWA_CMD_DATA_OUT;
        }

        cmdpkt = tr->tr_command;

        cmdpkt->cmd_hdr.header_desc.size_header = 128;
                
        cmd9k = &(cmdpkt->command.cmd_pkt_9k);
        cmd9k->command.opcode = TWA_OP_EXECUTE_SCSI_COMMAND;
        cmd9k->unit = ccb_h->target_id;
        cmd9k->request_id = tr->tr_request_id;
        cmd9k->status = 0;
        cmd9k->sgl_offset = 16; /* offset from end of hdr = max cdb len */

        if(ccb_h->flags & CAM_CDB_POINTER)
                bcopy(csio->cdb_io.cdb_ptr, cmd9k->cdb, csio->cdb_len);
        else
                bcopy(csio->cdb_io.cdb_bytes, cmd9k->cdb, csio->cdb_len);

        if (!(ccb_h->flags & CAM_DATA_PHYS)) {
                /* Virtual data addresses.  Need to convert them... */
                twa_dbg_dprint(3, sc, "XPT_SCSI_IO: Single virtual address!");
                if (!(ccb_h->flags & CAM_SCATTER_VALID)) {
                        if (csio->dxfer_len > TWA_MAX_IO_SIZE) {
                                twa_printf(sc, "I/O size %d too big.\n",
                                                        csio->dxfer_len);
                                ccb_h->status = CAM_REQ_TOO_BIG;
                                if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL)
                                        xpt_done(ccb);
                                return(1);
                        }

                        if ((tr->tr_length = csio->dxfer_len)) {
                                tr->tr_data = csio->data_ptr;
                                cmd9k->sgl_entries = 1;
                        }
                } else {
                        twa_printf(sc, "twa_execute_scsi: XPT_SCSI_IO: Got SGList!\n");
                        ccb_h->status = CAM_REQ_CMP_ERR;
                        if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL) {
                                xpt_done(ccb);
                        }
                        return(1);
                }
        } else {
                /* Data addresses are physical. */
                twa_printf(sc, "twa_execute_scsi: XPT_SCSI_IO: Physical data addresses!\n");
                ccb_h->status = CAM_REQ_CMP_ERR;
                if (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_EXTERNAL) {
                        ccb_h->status |= CAM_RELEASE_SIMQ;
                        ccb_h->status &= ~CAM_SIM_QUEUED;
                        xpt_done(ccb);
                }
                return(1);
        }

        tr->tr_cmd_pkt_type |= TWA_CMD_PKT_TYPE_9K;
        /* twa_setup_data_dmamap will fill in the SGL, and submit the I/O. */
        error = twa_map_request(tr);
        return(error);
}



/*
 * Function name:       twa_action
 * Description:         Driver entry point for CAM's use.
 *
 * Input:               sim     -- sim corresponding to the ctlr
 *                      ccb     -- ptr to CAM request
 * Output:              None
 * Return value:        None
 */
void
twa_action(struct cam_sim *sim, union ccb *ccb)
{
        struct twa_softc        *sc = (struct twa_softc *)cam_sim_softc(sim);
        struct ccb_hdr          *ccb_h = &(ccb->ccb_h);

        switch (ccb_h->func_code) {
        case XPT_SCSI_IO:       /* SCSI I/O */
        {
                struct twa_request      *tr;

                if ((sc->twa_state & TWA_STATE_SIMQ_FROZEN) ||
                                ((tr = twa_get_request(sc)) == NULL)) {
                        twa_dbg_dprint(2, sc, "simq frozen/Cannot get request pkt.");
                        /*
                         * Freeze the simq to maintain ccb ordering.  The next
                         * ccb that gets completed will unfreeze the simq.
                         */
                        twa_disallow_new_requests(sc);
                        ccb_h->status |= CAM_REQUEUE_REQ;
                        xpt_done(ccb);
                        break;
                }
                tr->tr_cmd_pkt_type |= TWA_CMD_PKT_TYPE_EXTERNAL;
                tr->tr_private = ccb;
                tr->tr_callback = twa_complete_io;
                if (twa_execute_scsi(tr, ccb))
                        twa_release_request(tr);
                break;
        }

        case XPT_ABORT:
                twa_dbg_dprint(2, sc, "Abort request");
                ccb_h->status = CAM_UA_ABORT;
                xpt_done(ccb);
                break;

        case XPT_RESET_BUS:
                twa_printf(sc, "Reset Bus request from CAM...\n");
                if (twa_reset(sc)) {
                        twa_printf(sc, "Reset Bus failed!\n");
                        ccb_h->status = CAM_REQ_CMP_ERR;
                }
                else
                        ccb_h->status = CAM_REQ_CMP;

                xpt_done(ccb);
                break;

        case XPT_SET_TRAN_SETTINGS:
                twa_dbg_dprint(3, sc, "XPT_SET_TRAN_SETTINGS");

                /*
                 * This command is not supported, since it's very specific
                 * to SCSI, and we are doing ATA.
                 */
                ccb_h->status = CAM_FUNC_NOTAVAIL;
                xpt_done(ccb);
                break;

        case XPT_GET_TRAN_SETTINGS: 
        {
                struct ccb_trans_settings       *cts = &ccb->cts;
                struct ccb_trans_settings_scsi *scsi =
                    &cts->proto_specific.scsi;
                struct ccb_trans_settings_spi *spi =
                    &cts->xport_specific.spi;

                cts->protocol = PROTO_SCSI;
                cts->protocol_version = SCSI_REV_2;
                cts->transport = XPORT_SPI;
                cts->transport_version = 2;

                spi->valid = CTS_SPI_VALID_DISC;
                spi->flags = CTS_SPI_FLAGS_DISC_ENB;
                scsi->valid = CTS_SCSI_VALID_TQ;
                scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
                twa_dbg_dprint(3, sc, "XPT_GET_TRAN_SETTINGS");
                ccb_h->status = CAM_REQ_CMP;
                xpt_done(ccb);
                break;
        }

        case XPT_CALC_GEOMETRY:
        {
                struct ccb_calc_geometry        *geom;

                twa_dbg_dprint(3, sc, "XPT_CALC_GEOMETRY request");
                geom = &ccb->ccg;

                if (geom->volume_size > 0x200000) /* 1 GB */ {
                        geom->heads = 255;
                        geom->secs_per_track = 63;
                } else {
                        geom->heads = 64;
                        geom->secs_per_track = 32;
                }
                geom->cylinders = geom->volume_size /
                                        (geom->heads * geom->secs_per_track);
                ccb_h->status = CAM_REQ_CMP;
                xpt_done(ccb);
                break;
        }

        case XPT_PATH_INQ:    /* Path inquiry -- get twa properties */
        {
                struct ccb_pathinq      *path_inq = &ccb->cpi;

                twa_dbg_dprint(3, sc, "XPT_PATH_INQ request");

                path_inq->version_num = 1;
                path_inq->hba_inquiry = 0;
                path_inq->target_sprt = 0;
                path_inq->hba_misc = 0;
                path_inq->hba_eng_cnt = 0;
                path_inq->max_target = TWA_MAX_UNITS;
                path_inq->max_lun = 0;
                path_inq->unit_number = cam_sim_unit(sim);
                path_inq->bus_id = cam_sim_bus(sim);
                path_inq->initiator_id = 12;
                path_inq->base_transfer_speed = 100000;
                strncpy(path_inq->sim_vid, "FreeBSD", SIM_IDLEN);
                strncpy(path_inq->hba_vid, "3ware", HBA_IDLEN);
                strncpy(path_inq->dev_name, cam_sim_name(sim), DEV_IDLEN);
                path_inq->transport = XPORT_SPI;
                path_inq->transport_version = 2;
                path_inq->protocol = PROTO_SCSI;
                path_inq->protocol_version = SCSI_REV_2;
                ccb_h->status = CAM_REQ_CMP;
                xpt_done(ccb);
                break;
        }

        default:
                twa_dbg_dprint(3, sc, "func_code = %x", ccb_h->func_code);
                ccb_h->status = CAM_REQ_INVALID;
                xpt_done(ccb);
                break;
        }
}



/*
 * Function name:       twa_poll
 * Description:         Driver entry point called when interrupts are not available.
 *
 * Input:               sim     -- sim corresponding to the controller
 * Output:              None
 * Return value:        None
 */
void
twa_poll(struct cam_sim *sim)
{
#ifdef TWA_DEBUG
        struct twa_softc *sc = (struct twa_softc *)cam_sim_softc(sim);
#endif /* TWA_DEBUG */

        twa_dbg_dprint(3, sc, "Entering sc = %p", sc);
        twa_interrupt(cam_sim_softc(sim));
        twa_dbg_dprint(3, sc, "Exiting sc = %p", sc);
}



/*
 * Function name:       twa_async
 * Description:         Driver entry point for CAM to notify driver of special
 *                      events.  We don't use this for now.
 *
 * Input:               callback_arg    -- ptr to per ctlr structure
 *                      code            -- code associated with the event
 *                      path            -- cam path
 *                      arg             -- 
 * Output:              None
 * Return value:        0       -- success
 *                      non-zero-- failure
 */
void
twa_async(void *callback_arg, u_int32_t code, 
                        struct cam_path *path, void *arg)
{
#ifdef TWA_DEBUG
        struct twa_softc *sc = (struct twa_softc *)callback_arg;
#endif /* TWA_DEBUG */

        twa_dbg_dprint(3, sc, "sc = %p, code = %x, path = %p, arg = %p",
                                sc, code, path, arg);
}



/*
 * Function name:       twa_request_bus_scan
 * Description:         Requests CAM for a scan of the bus.
 *
 * Input:               sc      -- ptr to per ctlr structure
 * Output:              None
 * Return value:        None
 */
void
twa_request_bus_scan(struct twa_softc *sc)
{
        struct cam_path *path;
        union ccb       *ccb;

        ccb = kmalloc(sizeof(union ccb), M_TEMP, M_WAITOK | M_ZERO);
        if (xpt_create_path(&path, xpt_periph, cam_sim_path(sc->twa_sim),
                        CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP)
                return;

        xpt_setup_ccb(&ccb->ccb_h, path, 5);
        ccb->ccb_h.func_code = XPT_SCAN_BUS;
        ccb->ccb_h.cbfcnp = twa_bus_scan_cb;
        ccb->crcn.flags = CAM_FLAG_NONE;
        xpt_action(ccb);
}



/*
 * Function name:       twa_bus_scan_cb
 * Description:         Callback from CAM on a bus scan request.
 *
 * Input:               periph  -- we don't use this
 *                      ccb     -- bus scan request ccb that we sent to CAM
 * Output:              None
 * Return value:        None
 */
static void
twa_bus_scan_cb(struct cam_periph *periph, union ccb *ccb)
{
        twa_dbg_print(3, "ccb = %p\n", ccb);
        if (ccb->ccb_h.status != CAM_REQ_CMP)
                kprintf("cam_scan_callback: failure status = %x\n",
                                        ccb->ccb_h.status);
        else
                twa_dbg_print(3, "success");

        xpt_free_path(ccb->ccb_h.path);
        kfree(ccb, M_TEMP);
}



/*
 * Function name:       twa_scsi_complete
 * Description:         Called to complete CAM scsi requests.
 *
 * Input:               tr      -- ptr to request pkt to be completed
 * Output:              None
 * Return value:        None
 */
void
twa_scsi_complete(struct twa_request *tr)
{
        struct twa_softc                *sc = tr->tr_sc;
        struct twa_command_header       *cmd_hdr = &(tr->tr_command->cmd_hdr);
        struct twa_command_9k           *cmd = &(tr->tr_command->command.cmd_pkt_9k);
        union ccb                       *ccb = (union ccb *)(tr->tr_private);
        u_int16_t                       error;
        u_int8_t                        *cdb;

        if (tr->tr_error) {
                if (tr->tr_error == EBUSY)
                        ccb->ccb_h.status |= CAM_REQUEUE_REQ;
                else if (tr->tr_error == EFBIG)
                        ccb->ccb_h.status = CAM_REQ_TOO_BIG;
                else
                        ccb->ccb_h.status = CAM_REQ_CMP_ERR;
        } else {
                if (cmd->status) {
                        twa_dbg_dprint(1, sc, "req_id = 0x%x, status = 0x%x",
                                                cmd->request_id,
                                                cmd->status);

                        error = cmd_hdr->status_block.error;
                        if ((error == TWA_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) ||
                                        (error == TWA_ERROR_UNIT_OFFLINE)) {
                                twa_dbg_dprint(3, sc, "Unsupported unit. PTL = %x %x %x",
                                                        ccb->ccb_h.path_id,
                                                        ccb->ccb_h.target_id,
                                                        ccb->ccb_h.target_lun);
                                ccb->ccb_h.status |= CAM_TID_INVALID;
                        } else {
                                twa_dbg_dprint(2, sc, "cmd = %x %x %x %x %x %x %x",
                                                cmd->command.opcode,
                                                cmd->command.reserved,
                                                cmd->unit,
                                                cmd->request_id,
                                                cmd->status,
                                                cmd->sgl_offset,
                                                cmd->sgl_entries);

                                cdb = (u_int8_t *)(cmd->cdb);
                                twa_dbg_dprint(2, sc, "cdb = %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x",
                                        cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7],
                                        cdb[8], cdb[9], cdb[10], cdb[11], cdb[12], cdb[13], cdb[14], cdb[15]);

                                cmd_hdr->err_specific_desc[sizeof(cmd_hdr->err_specific_desc) - 1] = '\0';
                                /* 
                                 * Print the error. Firmware doesn't yet support
                                 * the 'Mode Sense' cmd.  Don't print if the cmd
                                 * is 'Mode Sense', and the error is 'Invalid field
                                 * in CDB'.
                                 */
                                if (! ((cdb[0] == 0x1A) && (error == 0x10D)))
                                        twa_printf(sc, "SCSI cmd = 0x%x: ERROR: (0x%02X: 0x%04X): %s: %s\n",
                                                cdb[0],
                                                TWA_MESSAGE_SOURCE_CONTROLLER_ERROR,
                                                error,
                                                twa_find_msg_string(twa_error_table, error),
                                                cmd_hdr->err_specific_desc);
                        }

                        bcopy(cmd_hdr->sense_data, &(ccb->csio.sense_data),
                                                TWA_SENSE_DATA_LENGTH);
                        ccb->csio.sense_len = TWA_SENSE_DATA_LENGTH;
                        ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
                } else
                        ccb->ccb_h.status = CAM_REQ_CMP;

                ccb->csio.scsi_status = cmd->status;
                /* If simq is frozen, unfreeze it. */
                if (sc->twa_state & TWA_STATE_SIMQ_FROZEN)
                        twa_allow_new_requests(sc, (void *)ccb);
        }

        ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
        xpt_done(ccb);
}



/*
 * Function name:       twa_drain_busy_queue
 * Description:         This function gets called after a controller reset.
 *                      It errors back to CAM, all those requests that were
 *                      pending with the firmware, at the time of the reset.
 *
 * Input:               sc      -- ptr to per ctlr structure
 * Output:              None
 * Return value:        None
 */
void
twa_drain_busy_queue(struct twa_softc *sc)
{
        struct twa_request      *tr;
        union ccb               *ccb;

        /* Walk the busy queue. */
        while ((tr = twa_dequeue_busy(sc))) {
                twa_unmap_request(tr);
                if ((tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_INTERNAL) ||
                        (tr->tr_cmd_pkt_type & TWA_CMD_PKT_TYPE_IOCTL)) {
                        /* It's an internal/ioctl request.  Simply free it. */
                        if (tr->tr_data)
                                kfree(tr->tr_data, M_DEVBUF);
                } else {
                        if ((ccb = tr->tr_private)) {
                                /* It's a SCSI request.  Complete it. */
                                ccb->ccb_h.status = CAM_SCSI_BUS_RESET |
                                                        CAM_RELEASE_SIMQ;
                                ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
                                xpt_done(ccb);
                        }
                }
                twa_release_request(tr);
        }
}



/*
 * Function name:       twa_allow_new_requests
 * Description:         Sets the appropriate status bits in a ccb such that,
 *                      when the ccb is completed by a call to xpt_done,
 *                      CAM knows that it's ok to unfreeze the flow of new
 *                      requests to this controller, if the flow is frozen.
 *
 * Input:               sc      -- ptr to per ctlr structure
 *                      ccb     -- ptr to CAM request
 * Output:              None
 * Return value:        None
 */
void
twa_allow_new_requests(struct twa_softc *sc, void *ccb)
{
        ((union ccb *)(ccb))->ccb_h.status |= CAM_RELEASE_SIMQ;
        sc->twa_state &= ~TWA_STATE_SIMQ_FROZEN;
}



/*
 * Function name:       twa_disallow_new_requests
 * Description:         Calls the appropriate CAM function, so as to freeze
 *                      the flow of new requests from CAM to this controller.
 *
 * Input:               sc      -- ptr to per ctlr structure
 * Output:              None
 * Return value:        None
 */
void
twa_disallow_new_requests(struct twa_softc *sc)
{
        xpt_freeze_simq(sc->twa_sim, 1);
        sc->twa_state |= TWA_STATE_SIMQ_FROZEN;
}