sys/dev/netif/mii_layer/jmphyreg.h

   1 /*-
   2  * Copyright (c) 2008, Pyun YongHyeon
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice unmodified, this list of conditions, and the following
  10  *    disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  *
  15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  25  * SUCH DAMAGE.
  26  *
  27  * $FreeBSD: src/sys/dev/mii/jmphyreg.h,v 1.1 2008/05/27 01:16:40 yongari Exp $
  28  * $DragonFly: src/sys/dev/netif/mii_layer/jmphyreg.h,v 1.2 2008/09/13 04:04:39 sephe Exp $
  29  */
  30
  31 #ifndef _DEV_MII_JMPHYREG_H_
  32 #define _DEV_MII_JMPHYREG_H_
  33
  34 /*
  35  * Registers for the JMicron JMC250 Gigabit PHY.
  36  */
  37
  38 /* PHY specific status register. */
  39 #define JMPHY_SSR                       0x11
  40 #define JMPHY_SSR_SPEED_1000            0x8000
  41 #define JMPHY_SSR_SPEED_100             0x4000
  42 #define JMPHY_SSR_SPEED_10              0x0000
  43 #define JMPHY_SSR_SPEED_MASK            0xC000
  44 #define JMPHY_SSR_DUPLEX                0x2000
  45 #define JMPHY_SSR_SPD_DPLX_RESOLVED     0x0800
  46 #define JMPHY_SSR_LINK_UP               0x0400
  47 #define JMPHY_SSR_MDI_XOVER             0x0040
  48 #define JMPHY_SSR_INV_POLARITY          0x0002
  49
  50 /* PHY specific cable length status register. */
  51 #define JMPHY_SCL                       0x17
  52 #define JMPHY_SCL_CHAN_D_MASK           0xF000
  53 #define JMPHY_SCL_CHAN_C_MASK           0x0F00
  54 #define JMPHY_SCL_CHAN_B_MASK           0x00F0
  55 #define JMPHY_SCL_CHAN_A_MASK           0x000F
  56 #define JMPHY_SCL_LEN_35                0
  57 #define JMPHY_SCL_LEN_40                1
  58 #define JMPHY_SCL_LEN_50                2
  59 #define JMPHY_SCL_LEN_60                3
  60 #define JMPHY_SCL_LEN_70                4
  61 #define JMPHY_SCL_LEN_80                5
  62 #define JMPHY_SCL_LEN_90                6
  63 #define JMPHY_SCL_LEN_100               7
  64 #define JMPHY_SCL_LEN_110               8
  65 #define JMPHY_SCL_LEN_120               9
  66 #define JMPHY_SCL_LEN_130               10
  67 #define JMPHY_SCL_LEN_140               11
  68 #define JMPHY_SCL_LEN_150               12
  69 #define JMPHY_SCL_LEN_160               13
  70 #define JMPHY_SCL_LEN_170               14
  71 #define JMPHY_SCL_RSVD                  15
  72
  73 /* PHY specific LED control register 1. */
  74 #define JMPHY_LED_CTL1                  0x18
  75 #define JMPHY_LED_BLINK_42MS            0x0000
  76 #define JMPHY_LED_BLINK_84MS            0x2000
  77 #define JMPHY_LED_BLINK_170MS           0x4000
  78 #define JMPHY_LED_BLINK_340MS           0x6000
  79 #define JMPHY_LED_BLINK_670MS           0x8000
  80 #define JMPHY_LED_BLINK_MASK            0xE000
  81 #define JMPHY_LED_FLP_GAP_MASK          0x1F00
  82 #define JMPHY_LED_FLP_GAP_DEFULT        0x1000
  83 #define JMPHY_LED2_POLARITY_MASK        0x0030
  84 #define JMPHY_LED1_POLARITY_MASK        0x000C
  85 #define JMPHY_LED0_POLARITY_MASK        0x0003
  86 #define JMPHY_LED_ON_LO_OFF_HI          0
  87 #define JMPHY_LED_ON_HI_OFF_HI          1
  88 #define JMPHY_LED_ON_LO_OFF_TS          2
  89 #define JMPHY_LED_ON_HI_OFF_TS          3
  90
  91 /* PHY specific LED control register 2. */
  92 #define JMPHY_LED_CTL2                  0x19
  93 #define JMPHY_LED_NO_STRETCH            0x0000
  94 #define JMPHY_LED_STRETCH_42MS          0x2000
  95 #define JMPHY_LED_STRETCH_84MS          0x4000
  96 #define JMPHY_LED_STRETCH_170MS         0x6000
  97 #define JMPHY_LED_STRETCH_340MS         0x8000
  98 #define JMPHY_LED_STRETCH_670MS         0xB000
  99 #define JMPHY_LED_STRETCH_1300MS        0xC000
 100 #define JMPHY_LED_STRETCH_2700MS        0xE000
 101 #define JMPHY_LED2_MODE_MASK            0x0F00
 102 #define JMPHY_LED1_MODE_MASK            0x00F0
 103 #define JMPHY_LED0_MODE_MASK            0x000F
 104
 105 /* PHY specific test mode control register. */
 106 #define JMPHY_TMCTL                     0x1A
 107 #define JMPHY_TMCTL_SLEEP_ENB           0x1000
 108
 109 /* PHY specific configuration */
 110 #define JMPHY_CONF                      0x1B
 111 #define JMPHY_CONF_EXTFIFO              0x0000 /* use extended fifo */
 112 #define JMPHY_CONF_DEFFIFO              0x0004 /* use default fifo */
 113
 114 #endif  /* _DEV_MII_JMPHYREG_H_ */