linprocfs - Introduce /proc/mounts
[dragonfly.git] / sys / dev / netif / ed / if_ed_pccard.c
blob67df8659bd60375a263ad3a1432e4411ff0cfb60
1 /*
2 * Copyright (c) 1995, David Greenman
3 * All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice unmodified, this list of conditions, and the following
10 * disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
27 * $FreeBSD: src/sys/dev/ed/if_ed_pccard.c,v 1.55 2003/12/31 04:25:00 kato Exp $
28 * $DragonFly: src/sys/dev/netif/ed/if_ed_pccard.c,v 1.22 2008/08/17 04:32:33 sephe Exp $
31 #include "opt_ed.h"
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/socket.h>
36 #include <sys/kernel.h>
37 #include <sys/conf.h>
38 #include <sys/uio.h>
39 #include <sys/module.h>
40 #include <sys/interrupt.h>
41 #include <sys/bus.h>
42 #include <sys/rman.h>
44 #include <net/ethernet.h>
45 #include <net/if.h>
46 #include <net/if_arp.h>
47 #include <net/if_mib.h>
48 #include <net/if_media.h>
50 #include "if_edreg.h"
51 #include "if_edvar.h"
52 #include <bus/pccard/pccard_cis.h>
53 #include <bus/pccard/pccardvar.h>
54 #include <bus/pccard/pccarddevs.h>
55 #ifndef ED_NO_MIIBUS
56 #include <dev/netif/mii_layer/mii.h>
57 #include <dev/netif/mii_layer/miivar.h>
58 #endif
60 #include "card_if.h"
61 #ifndef ED_NO_MIIBUS
62 /* "device miibus" required. See GENERIC if you get errors here. */
63 #include "miibus_if.h"
65 MODULE_DEPEND(ed, miibus, 1, 1, 1);
66 #endif
67 MODULE_DEPEND(ed, pccard, 1, 1, 1);
70 * PC-Card (PCMCIA) specific code.
72 static int ed_pccard_match(device_t);
73 static int ed_pccard_probe(device_t);
74 static int ed_pccard_attach(device_t);
75 static int ed_pccard_detach(device_t);
77 static int ed_pccard_Linksys(device_t dev);
78 static int ed_pccard_ax88190(device_t dev);
80 static void ax88190_geteprom(struct ed_softc *);
81 static int ed_pccard_memwrite(device_t dev, off_t offset, u_char byte);
82 #ifndef ED_NO_MIIBUS
83 static void ed_pccard_dlink_mii_reset(struct ed_softc *sc);
84 static u_int ed_pccard_dlink_mii_readbits(struct ed_softc *sc, int nbits);
85 static void ed_pccard_dlink_mii_writebits(struct ed_softc *sc, u_int val,
86 int nbits);
87 #endif
90 * ed_pccard_detach - unload the driver and clear the table.
91 * XXX TODO:
92 * This is usually called when the card is ejected, but
93 * can be caused by a modunload of a controller driver.
94 * The idea is to reset the driver's view of the device
95 * and ensure that any driver entry points such as
96 * read and write do not hang.
98 static int
99 ed_pccard_detach(device_t dev)
101 struct ed_softc *sc = device_get_softc(dev);
102 struct ifnet *ifp = &sc->arpcom.ac_if;
104 lwkt_serialize_enter(ifp->if_serializer);
106 if (sc->gone) {
107 device_printf(dev, "already unloaded\n");
108 lwkt_serialize_exit(ifp->if_serializer);
109 return (0);
111 ed_stop(sc);
112 ifp->if_flags &= ~IFF_RUNNING;
113 sc->gone = 1;
114 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
116 lwkt_serialize_exit(ifp->if_serializer);
118 ether_ifdetach(ifp);
119 ed_release_resources(dev);
120 return (0);
123 static const struct ed_product {
124 struct pccard_product prod;
125 int flags;
126 #define NE2000DVF_DL10019 0x0001 /* chip is D-Link DL10019 */
127 #define NE2000DVF_AX88190 0x0002 /* chip is ASIX AX88190 */
128 } ed_pccard_products[] = {
129 { PCMCIA_CARD(ACCTON, EN2212, 0), 0},
130 { PCMCIA_CARD(ALLIEDTELESIS, LA_PCM, 0), 0},
131 { PCMCIA_CARD(AMBICOM, AMB8002T, 0), 0},
132 { PCMCIA_CARD(BILLIONTON, LNT10TN, 0), 0},
133 { PCMCIA_CARD(BILLIONTON, CFLT10N, 0), 0},
134 { PCMCIA_CARD(BUFFALO, LPC3_CLT, 0), 0},
135 { PCMCIA_CARD(BUFFALO, LPC3_CLX, 0), NE2000DVF_AX88190},
136 { PCMCIA_CARD(BUFFALO, LPC_CF_CLT, 0), 0},
137 { PCMCIA_CARD(CNET, NE2000, 0), 0},
138 { PCMCIA_CARD(COMPEX, LINKPORT_ENET_B, 0), 0},
139 { PCMCIA_CARD(COREGA, ETHER_II_PCC_T, 0), 0},
140 { PCMCIA_CARD(COREGA, ETHER_II_PCC_TD, 0), 0},
141 { PCMCIA_CARD(COREGA, ETHER_PCC_T, 0), 0},
142 { PCMCIA_CARD(COREGA, ETHER_PCC_TD, 0), 0},
143 { PCMCIA_CARD(COREGA, FAST_ETHER_PCC_TX, 0), NE2000DVF_DL10019 },
144 { PCMCIA_CARD(COREGA, FETHER_PCC_TXD, 0), NE2000DVF_AX88190 },
145 { PCMCIA_CARD(COREGA, FETHER_PCC_TXF, 0), NE2000DVF_DL10019 },
146 { PCMCIA_CARD(DAYNA, COMMUNICARD_E_1, 0), 0},
147 { PCMCIA_CARD(DAYNA, COMMUNICARD_E_2, 0), 0},
148 { PCMCIA_CARD(DLINK, DE650, 0), 0},
149 { PCMCIA_CARD(DLINK, DE660, 0), 0 },
150 { PCMCIA_CARD(DLINK, DE660PLUS, 0), 0},
151 { PCMCIA_CARD(DLINK, DFE670TXD, 0), NE2000DVF_DL10019},
152 { PCMCIA_CARD(DYNALINK, L10C, 0), 0},
153 { PCMCIA_CARD(EDIMAX, EP4000A, 0), 0},
154 { PCMCIA_CARD(EPSON, EEN10B, 0), 0},
155 { PCMCIA_CARD(EXP, THINLANCOMBO, 0), 0},
156 { PCMCIA_CARD(IBM, INFOMOVER, 0), 0},
157 { PCMCIA_CARD(IODATA3, PCLAT, 0), 0},
158 { PCMCIA_CARD(KINGSTON, KNE2, 0), 0},
159 { PCMCIA_CARD(LANTECH, FASTNETTX, 0),NE2000DVF_AX88190 },
160 { PCMCIA_CARD(LINKSYS, COMBO_ECARD, 0), NE2000DVF_DL10019 },
161 { PCMCIA_CARD(LINKSYS, ECARD_1, 0), 0},
162 { PCMCIA_CARD(LINKSYS, ECARD_2, 0), 0},
163 { PCMCIA_CARD(LINKSYS, ETHERFAST, 0), NE2000DVF_DL10019 },
164 { PCMCIA_CARD(LINKSYS, TRUST_COMBO_ECARD, 0), 0},
165 { PCMCIA_CARD(MACNICA, ME1_JEIDA, 0), 0},
166 { PCMCIA_CARD(MELCO, LPC3_CLX, 0), NE2000DVF_AX88190},
167 { PCMCIA_CARD(MELCO, LPC3_TX, 0), NE2000DVF_AX88190 },
168 { PCMCIA_CARD(NDC, ND5100_E, 0), 0},
169 { PCMCIA_CARD(NETGEAR, FA410TXC, 0), NE2000DVF_DL10019},
170 { PCMCIA_CARD(NETGEAR, FA411, 0), NE2000DVF_AX88190},
171 { PCMCIA_CARD(NEXTCOM, NEXTHAWK, 0), 0},
172 { PCMCIA_CARD(OEM2, ETHERNET, 0), 0},
173 { PCMCIA_CARD(PLANET, SMARTCOM2000, 0), 0 },
174 { PCMCIA_CARD(PREMAX, PE200, 0), 0},
175 { PCMCIA_CARD(RACORE, ETHERNET, 0), 0},
176 { PCMCIA_CARD(RPTI, EP400, 0), 0},
177 { PCMCIA_CARD(RPTI, EP401, 0), 0},
178 { PCMCIA_CARD(SMC, EZCARD, 0), 0},
179 { PCMCIA_CARD(SOCKET, EA_ETHER, 0), 0},
180 { PCMCIA_CARD(SOCKET, LP_ETHER, 0), 0},
181 { PCMCIA_CARD(SOCKET, LP_ETHER_CF, 0), 0},
182 { PCMCIA_CARD(SOCKET, LP_ETH_10_100_CF, 0), NE2000DVF_DL10019},
183 { PCMCIA_CARD(SVEC, COMBOCARD, 0), 0},
184 { PCMCIA_CARD(SVEC, LANCARD, 0), 0},
185 { PCMCIA_CARD(TAMARACK, ETHERNET, 0), 0},
186 { PCMCIA_CARD(TDK, LAK_CD031, 0), 0},
187 { PCMCIA_CARD(TELECOMDEVICE, TCD_HPC100, 0), NE2000DVF_AX88190 },
188 { PCMCIA_CARD(XIRCOM, CFE_10, 0), 0},
189 { PCMCIA_CARD(ZONET, ZEN, 0), 0},
190 { { NULL } }
193 static int
194 ed_pccard_match(device_t dev)
196 const struct ed_product *pp;
198 if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
199 (const struct pccard_product *) ed_pccard_products,
200 sizeof(ed_pccard_products[0]), NULL)) != NULL) {
201 if (pp->prod.pp_name != NULL)
202 device_set_desc(dev, pp->prod.pp_name);
203 if (pp->flags & NE2000DVF_DL10019)
204 device_set_flags(dev, ED_FLAGS_LINKSYS);
205 else if (pp->flags & NE2000DVF_AX88190)
206 device_set_flags(dev, ED_FLAGS_AX88190);
207 return (0);
209 return (EIO);
213 * Probe framework for pccards. Replicates the standard framework,
214 * minus the pccard driver registration and ignores the ether address
215 * supplied (from the CIS), relying on the probe to find it instead.
217 static int
218 ed_pccard_probe(device_t dev)
220 int error;
221 int flags = device_get_flags(dev);
223 if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_AX88190) {
224 error = ed_pccard_ax88190(dev);
225 goto end2;
228 error = ed_probe_Novell(dev, 0, flags);
229 if (error == 0)
230 goto end;
231 ed_release_resources(dev);
233 error = ed_probe_WD80x3(dev, 0, flags);
234 if (error == 0)
235 goto end;
236 ed_release_resources(dev);
237 goto end2;
239 end:
240 if (ED_FLAGS_GETTYPE(flags) & ED_FLAGS_LINKSYS)
241 ed_pccard_Linksys(dev);
242 end2:
243 if (error == 0)
244 error = ed_alloc_irq(dev, 0, 0);
246 ed_release_resources(dev);
247 return (error);
250 static int
251 ed_pccard_attach(device_t dev)
253 struct ed_softc *sc = device_get_softc(dev);
254 struct ifnet *ifp = &sc->arpcom.ac_if;
255 int error;
256 int i;
257 uint8_t sum;
258 const uint8_t *ether_addr;
260 if (sc->port_used > 0)
261 ed_alloc_port(dev, sc->port_rid, sc->port_used);
262 if (sc->mem_used)
263 ed_alloc_memory(dev, sc->mem_rid, sc->mem_used);
264 ed_alloc_irq(dev, sc->irq_rid, 0);
266 if (sc->vendor != ED_VENDOR_LINKSYS) {
267 ether_addr = pccard_get_ether(dev);
268 for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
269 sum |= ether_addr[i];
270 if (sum)
271 bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
274 error = ed_attach(dev);
275 #ifndef ED_NO_MIIBUS
276 if (error == 0 && sc->vendor == ED_VENDOR_LINKSYS) {
277 /* Probe for an MII bus, but ignore errors. */
278 ed_pccard_dlink_mii_reset(sc);
279 sc->mii_readbits = ed_pccard_dlink_mii_readbits;
280 sc->mii_writebits = ed_pccard_dlink_mii_writebits;
281 mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
282 ed_ifmedia_sts);
284 #endif
286 error = bus_setup_intr(dev, sc->irq_res, INTR_MPSAFE,
287 edintr, sc, &sc->irq_handle,
288 ifp->if_serializer);
289 if (error) {
290 kprintf("setup intr failed %d \n", error);
291 ed_release_resources(dev);
292 return (error);
293 } else {
294 ifp->if_cpuid = ithread_cpuid(rman_get_start(sc->irq_res));
295 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus);
298 return (error);
301 static void
302 ax88190_geteprom(struct ed_softc *sc)
304 int prom[16],i;
305 u_char tmp;
306 struct {
307 u_char offset, value;
308 } pg_seq[] = {
309 {ED_P0_CR, ED_CR_RD2|ED_CR_STP}, /* Select Page0 */
310 {ED_P0_DCR, 0x01},
311 {ED_P0_RBCR0, 0x00}, /* Clear the count regs. */
312 {ED_P0_RBCR1, 0x00},
313 {ED_P0_IMR, 0x00}, /* Mask completion irq. */
314 {ED_P0_ISR, 0xff},
315 {ED_P0_RCR, ED_RCR_MON | ED_RCR_INTT}, /* Set To Monitor */
316 {ED_P0_TCR, ED_TCR_LB0}, /* loopback mode. */
317 {ED_P0_RBCR0, 32},
318 {ED_P0_RBCR1, 0x00},
319 {ED_P0_RSAR0, 0x00},
320 {ED_P0_RSAR1, 0x04},
321 {ED_P0_CR ,ED_CR_RD0 | ED_CR_STA},
324 /* Reset Card */
325 tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
326 ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
327 DELAY(5000);
328 ed_asic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
329 DELAY(5000);
331 /* Card Settings */
332 for (i = 0; i < sizeof(pg_seq) / sizeof(pg_seq[0]); i++)
333 ed_nic_outb(sc, pg_seq[i].offset, pg_seq[i].value);
335 /* Get Data */
336 for (i = 0; i < 16; i++)
337 prom[i] = ed_asic_inb(sc, 0);
338 sc->arpcom.ac_enaddr[0] = prom[0] & 0xff;
339 sc->arpcom.ac_enaddr[1] = prom[0] >> 8;
340 sc->arpcom.ac_enaddr[2] = prom[1] & 0xff;
341 sc->arpcom.ac_enaddr[3] = prom[1] >> 8;
342 sc->arpcom.ac_enaddr[4] = prom[2] & 0xff;
343 sc->arpcom.ac_enaddr[5] = prom[2] >> 8;
346 static int
347 ed_pccard_memwrite(device_t dev, off_t offset, u_char byte)
349 int cis_rid;
350 struct resource *cis;
352 cis_rid = 0;
353 cis = bus_alloc_resource(dev, SYS_RES_MEMORY, &cis_rid, 0, ~0,
354 4 << 10, RF_ACTIVE | RF_SHAREABLE);
355 if (cis == NULL)
356 return (ENXIO);
357 CARD_SET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY,
358 cis_rid, PCCARD_A_MEM_ATTR);
360 bus_space_write_1(rman_get_bustag(cis), rman_get_bushandle(cis),
361 offset, byte);
363 bus_deactivate_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
364 bus_release_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
366 return (0);
370 * Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
371 * and compatible cards (DL10019C Ethernet controller).
373 * Note: The PAO patches try to use more memory for the card, but that
374 * seems to fail for my card. A future optimization would add this back
375 * conditionally.
377 static int
378 ed_pccard_Linksys(device_t dev)
380 struct ed_softc *sc = device_get_softc(dev);
381 u_char sum;
382 int i;
385 * Linksys registers(offset from ASIC base)
387 * 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
388 * 0x0A : Card ID Register (CIR)
389 * 0x0B : Check Sum Register (SR)
391 for (sum = 0, i = 0x04; i < 0x0c; i++)
392 sum += ed_asic_inb(sc, i);
393 if (sum != 0xff)
394 return (0); /* invalid DL10019C */
395 for (i = 0; i < ETHER_ADDR_LEN; i++) {
396 sc->arpcom.ac_enaddr[i] = ed_asic_inb(sc, 0x04 + i);
399 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
400 sc->isa16bit = 1;
401 sc->vendor = ED_VENDOR_LINKSYS;
402 sc->type = ED_TYPE_NE2000;
403 sc->type_str = "Linksys";
405 return (1);
409 * Special setup for AX88190
411 static int
412 ed_pccard_ax88190(device_t dev)
414 int error;
415 int flags = device_get_flags(dev);
416 int iobase;
417 struct ed_softc *sc = device_get_softc(dev);
419 /* Allocate the port resource during setup. */
420 error = ed_alloc_port(dev, 0, ED_NOVELL_IO_PORTS);
421 if (error)
422 return (error);
424 sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
425 sc->nic_offset = ED_NOVELL_NIC_OFFSET;
426 sc->chip_type = ED_CHIP_TYPE_AX88190;
429 * Set Attribute Memory IOBASE Register. Is this a deficiency in
430 * the PC Card layer, or an ax88190 specific issue? xxx
432 iobase = rman_get_start(sc->port_res);
433 ed_pccard_memwrite(dev, ED_AX88190_IOBASE0, iobase & 0xff);
434 ed_pccard_memwrite(dev, ED_AX88190_IOBASE1, (iobase >> 8) & 0xff);
435 ax88190_geteprom(sc);
436 ed_release_resources(dev);
437 error = ed_probe_Novell(dev, 0, flags);
438 if (error == 0) {
439 sc->vendor = ED_VENDOR_PCCARD;
440 sc->type = ED_TYPE_NE2000;
441 sc->type_str = "AX88190";
443 return (error);
446 #ifndef ED_NO_MIIBUS
447 /* MII bit-twiddling routines for cards using Dlink chipset */
448 #define DLINK_MIISET(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
449 ed_asic_inb(sc, ED_DLINK_MIIBUS) | (x))
450 #define DLINK_MIICLR(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
451 ed_asic_inb(sc, ED_DLINK_MIIBUS) & ~(x))
453 static void
454 ed_pccard_dlink_mii_reset(struct ed_softc *sc)
456 ed_asic_outb(sc, ED_DLINK_MIIBUS, 0);
457 DELAY(10);
458 DLINK_MIISET(sc, ED_DLINK_MII_RESET2);
459 DELAY(10);
460 DLINK_MIISET(sc, ED_DLINK_MII_RESET1);
461 DELAY(10);
462 DLINK_MIICLR(sc, ED_DLINK_MII_RESET1);
463 DELAY(10);
464 DLINK_MIICLR(sc, ED_DLINK_MII_RESET2);
465 DELAY(10);
468 static void
469 ed_pccard_dlink_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
471 int i;
473 DLINK_MIISET(sc, ED_DLINK_MII_DIROUT);
475 for (i = nbits - 1; i >= 0; i--) {
476 if ((val >> i) & 1)
477 DLINK_MIISET(sc, ED_DLINK_MII_DATAOUT);
478 else
479 DLINK_MIICLR(sc, ED_DLINK_MII_DATAOUT);
480 DELAY(10);
481 DLINK_MIISET(sc, ED_DLINK_MII_CLK);
482 DELAY(10);
483 DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
484 DELAY(10);
488 static u_int
489 ed_pccard_dlink_mii_readbits(struct ed_softc *sc, int nbits)
491 int i;
492 u_int val = 0;
494 DLINK_MIICLR(sc, ED_DLINK_MII_DIROUT);
496 for (i = nbits - 1; i >= 0; i--) {
497 DLINK_MIISET(sc, ED_DLINK_MII_CLK);
498 DELAY(10);
499 val <<= 1;
500 if (ed_asic_inb(sc, ED_DLINK_MIIBUS) & ED_DLINK_MII_DATATIN)
501 val++;
502 DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
503 DELAY(10);
506 return val;
508 #endif
510 static device_method_t ed_pccard_methods[] = {
511 /* Device interface */
512 DEVMETHOD(device_probe, pccard_compat_probe),
513 DEVMETHOD(device_attach, pccard_compat_attach),
514 DEVMETHOD(device_detach, ed_pccard_detach),
516 #ifndef ED_NO_MIIBUS
517 /* Bus interface */
518 DEVMETHOD(bus_child_detached, ed_child_detached),
520 /* MII interface */
521 DEVMETHOD(miibus_readreg, ed_miibus_readreg),
522 DEVMETHOD(miibus_writereg, ed_miibus_writereg),
523 #endif
525 /* Card interface */
526 DEVMETHOD(card_compat_match, ed_pccard_match),
527 DEVMETHOD(card_compat_probe, ed_pccard_probe),
528 DEVMETHOD(card_compat_attach, ed_pccard_attach),
529 { 0, 0 }
532 static driver_t ed_pccard_driver = {
533 "ed",
534 ed_pccard_methods,
535 sizeof(struct ed_softc)
538 DRIVER_MODULE(if_ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
539 #ifndef ED_NO_MIIBUS
540 MODULE_DEPEND(if_ed, miibus, 1, 1, 1);
541 DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
542 #endif