2 * ------+---------+---------+---------+---------+---------+---------+---------*
3 * Copyright (c) 2001 - Garance Alistair Drosehn <gad@FreeBSD.org>.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * The views and conclusions contained in the software and documentation
28 * are those of the authors and should not be interpreted as representing
29 * official policies, either expressed or implied, of the FreeBSD Project.
31 * ------+---------+---------+---------+---------+---------+---------+---------*
33 * $FreeBSD: src/usr.sbin/lpr/common_source/ctlinfo.c,v 1.1.2.6 2002/07/14 23:47:09 gad Exp $
37 * ctlinfo - This collection of routines will know everything there is to
38 * know about the information inside a control file ('cf*') which is used
39 * to describe a print job in lpr & friends. The eventual goal is that it
40 * will be the ONLY source file to know what's inside these control-files.
44 * Some define's useful for debuging.
45 * TRIGGERTEST_FNAME and DEBUGREADCF_FNAME, allow us to do testing on
46 * a per-spool-directory basis.
48 /* #define TRIGGERTEST_FNAME "LpdTestRenameTF" */
49 /* #define DEBUGREADCF_FNAME "LpdDebugReadCF" */
50 /* #define LEAVE_TMPCF_FILES 1 */
52 #include <sys/param.h>
68 char *cji_buff
; /* buffer for get_line */
69 char *cji_eobuff
; /* last byte IN the buffer */
71 int cji_buffsize
; /* # bytes in the buffer */
76 * This has to be large enough to fit the maximum length of a single line
77 * in a control-file, including the leading 'command id', a trailing '\n'
78 * and ending '\0'. The max size of an 'U'nlink line, for instance, is
79 * 1 ('U') + PATH_MAX (filename) + 2 ('\n\0'). The maximum 'H'ost line is
80 * 1 ('H') + NI_MAXHOST (remote hostname) + 2 ('\n\0'). Other lines can be
81 * even longer than those. So, pick some nice, large, arbitrary value.
83 #define CTI_LINEMAX PATH_MAX+NI_MAXHOST+5
85 extern const char *from_host
; /* client's machine name */
86 extern const char *from_ip
; /* client machine's IP address */
89 void ctl_dumpcji(FILE *_dbg_stream
, const char *_heading
,
90 struct cjobinfo
*_cjinf
);
91 static char *ctl_getline(struct cjobinfo
*_cjinf
);
92 static void ctl_rewindcf(struct cjobinfo
*_cjinf
);
93 char *ctl_rmjob(const char *_ptrname
, const char *_cfname
);
97 * Control-files (cf*) have the following format.
99 * Each control-file describes a single job. It will list one or more
100 * "datafiles" (df*) which should be copied to some printer. Usually
101 * there is only one datafile per job. For the curious, RFC 1179 is an
102 * informal and out-of-date description of lpr/lpd circa 1990.
104 * Each line in the file gives an attribute of the job as a whole, or one
105 * of the datafiles in the job, or a "command" indicating something to do
106 * with one of the datafiles. Each line starts with an 'id' that indicates
107 * what that line is there for. The 'id' is historically a single byte,
108 * but may be multiple bytes (obviously it would be best if multi-byte ids
109 * started with some letter not already used as a single-byte id!).
110 * After the 'id', the remainder of the line will be the value of the
111 * indicated attribute, or a name of the datafile to be operated on.
113 * In the following lists of ids, the ids with a '!' in front of them are
114 * NOT explicitly supported by this version of lpd, or at least "not yet
115 * supported". They are only listed for reference purposes, so people
116 * won't be tempted to reuse the same id for a different purpose.
118 * The following are attributes of the job which should not appear more
119 * than once in a control file. Only the 'H' and 'P' lines are required
120 * by the RFC, but some implementations of lpr won't even get that right.
122 * ! A - [used by lprNG]
123 * B - As far as I know, this is never used as a single-byte id.
124 * Therefore, I intend to use it for multi-byte id codes.
125 * C - "class name" to display on banner page (this is sometimes
126 * used to hold options for print filters)
127 * ! D - [in lprNG, "timestamp" of when the job was submitted]
128 * ! E - "environment variables" to set [some versions of linux]
129 * H - "host name" of machine where the original 'lpr' was done
130 * I - "indent", the amount to indent output
131 * J - "job name" to display on banner page
132 * L - "literal" user's name as it should be displayed on the
133 * banner page (it is the existence of an 'L' line which
134 * indicates that a job should have a banner page).
135 * M - "mail", userid to mail to when done printing (with email
136 * going to 'M'@'H', so to speak).
137 * P - "person", the user's login name (e.g. for accounting)
138 * ! Q - [used by lprNG for queue-name]
139 * R - "resolution" in dpi, for some laser printer queues
140 * T - "title" for files sent thru 'pr'
141 * W - "width" to use for printing plain-text files
142 * Z - In BSD, "locale" to use for datafiles sent thru 'pr'.
143 * (this BSD usage should move to a different id...)
144 * [in lprNG - this line holds the "Z options"]
145 * 1 - "R font file" for files sent thru troff
146 * 2 - "I font file" for files sent thru troff
147 * 3 - "B font file" for files sent thru troff
148 * 4 - "S font file" for files sent thru troff
150 * The following are attributes attached to a datafile, and thus may
151 * appear multiple times in a control file (once per datafile):
153 * N - "name" of file (for display purposes, used by 'lpq')
154 * S - "stat() info" used for symbolic link ('lpr -s')
157 * The following indicate actions to take on a given datafile. The same
158 * datafile may appear on more than one "print this file" command in the
159 * control file. Note that ALL ids with lowercase letters are expected
160 * to be actions to "print this file":
162 * c - "file name", cifplot file to print. This action appears
163 * when the user has requested 'lpr -c'.
164 * d - "file name", dvi file to print, user requested 'lpr -d'
165 * f - "file name", a plain-text file to print = "standard"
166 * g - "file name", plot(1G) file to print, ie 'lpr -g'
167 * l - "file name", text file with control chars which should
168 * be printed literally, ie 'lpr -l' (note: some printers
169 * take this id as a request to print a postscript file,
170 * and because of *that* some OS's use 'l' to indicate
171 * that a datafile is a postscript file)
172 * n - "file name", ditroff(1) file to print, ie 'lpr -n'
173 * o - "file name", a postscript file to print. This id is
174 * described in the original RFC, but not much has been
175 * done with it. This 'lpr' does not generate control
176 * lines with 'o'-actions, but lpd's printjob processing
177 * will treat it the same as 'l'.
178 * p - "file name", text file to print with pr(1), ie 'lpr -p'
179 * t - "file name", troff(1) file to print, ie 'lpr -t'
180 * v - "file name", plain raster file to print
182 * U - "file name" of datafile to unlink (ie, remove file
183 * from spool directory. To be done in a 'Pass 2',
184 * AFTER having processed all datafiles in the job).
189 ctl_freeinf(struct cjobinfo
*cjinf
)
191 #define FREESTR(xStr) \
192 if (xStr != NULL) { \
197 struct cjprivate
*cpriv
;
201 cpriv
= cjinf
->cji_priv
;
202 if ((cpriv
== NULL
) || (cpriv
!= cpriv
->pub
.cji_priv
)) {
203 syslog(LOG_ERR
, "in ctl_freeinf(%p): invalid cjinf (cpriv %p)",
204 (void *)cjinf
, (void *)cpriv
);
208 FREESTR(cpriv
->pub
.cji_accthost
);
209 FREESTR(cpriv
->pub
.cji_acctuser
);
210 FREESTR(cpriv
->pub
.cji_class
);
211 FREESTR(cpriv
->pub
.cji_curqueue
);
212 /* [cpriv->pub.cji_fname is part of cpriv-malloced area] */
213 FREESTR(cpriv
->pub
.cji_jobname
);
214 FREESTR(cpriv
->pub
.cji_mailto
);
215 FREESTR(cpriv
->pub
.cji_username
);
217 if (cpriv
->cji_fstream
!= NULL
) {
218 fclose(cpriv
->cji_fstream
);
219 cpriv
->cji_fstream
= NULL
;
222 cjinf
->cji_priv
= NULL
;
227 #ifdef DEBUGREADCF_FNAME
228 static FILE *ctl_dbgfile
= NULL
;
229 static struct stat ctl_dbgstat
;
231 static int ctl_dbgline
= 0;
234 ctl_readcf(const char *ptrname
, const char *cfname
)
240 struct cjprivate
*cpriv
;
241 struct cjobinfo
*cjinf
;
242 size_t msize
, sroom
, sroom2
;
244 cfile
= fopen(cfname
, "r");
246 syslog(LOG_ERR
, "%s: ctl_readcf error fopen(%s): %s",
247 ptrname
, cfname
, strerror(errno
));
251 sroom
= roundup(sizeof(struct cjprivate
), 8);
252 sroom2
= sroom
+ strlen(cfname
) + 1;
253 sroom2
= roundup(sroom2
, 8);
254 msize
= sroom2
+ CTI_LINEMAX
;
255 msize
= roundup(msize
, 8);
256 cstart
= malloc(msize
);
259 memset(cstart
, 0, msize
);
260 cpriv
= (struct cjprivate
*)cstart
;
261 cpriv
->pub
.cji_priv
= cpriv
;
263 cpriv
->pub
.cji_fname
= (char *)cstart
+ sroom
;
264 strcpy(cpriv
->pub
.cji_fname
, cfname
);
265 cpriv
->cji_buff
= (char *)cstart
+ sroom2
;
266 cpriv
->cji_buffsize
= (int)(msize
- sroom2
);
267 cpriv
->cji_eobuff
= (char *)cstart
+ msize
- 1;
269 cpriv
->cji_fstream
= cfile
;
270 cpriv
->pub
.cji_curqueue
= strdup(ptrname
);
273 #ifdef DEBUGREADCF_FNAME
275 id
= stat(DEBUGREADCF_FNAME
, &ctl_dbgstat
);
277 /* the file exists in this spool directory, write some simple
278 * debugging info to it */
279 ctl_dbgfile
= fopen(DEBUGREADCF_FNAME
, "a");
280 if (ctl_dbgfile
!= NULL
) {
281 fprintf(ctl_dbgfile
, "%s: s=%p r=%ld e=%p %p->%s\n",
282 ptrname
, (void *)cpriv
, (long)sroom
,
283 cpriv
->cji_eobuff
, cpriv
->pub
.cji_fname
,
284 cpriv
->pub
.cji_fname
);
289 * Copy job-attribute values from control file to the struct of
290 * "public" information. In some cases, it is invalid for the
291 * value to be a null-string, so that is ignored.
293 cjinf
= &(cpriv
->pub
);
294 lbuff
= ctl_getline(cjinf
);
295 while (lbuff
!= NULL
) {
299 cpriv
->pub
.cji_class
= strdup(lbuff
);
304 cpriv
->pub
.cji_accthost
= strdup(lbuff
);
307 cpriv
->pub
.cji_jobname
= strdup(lbuff
);
310 cpriv
->pub
.cji_username
= strdup(lbuff
);
314 * No valid mail-to address would start with a minus.
315 * If this one does, it is probably some trickster who
316 * is trying to trigger options on sendmail. Ignore.
322 cpriv
->pub
.cji_mailto
= strdup(lbuff
);
325 /* don't allow userid's with a leading minus, either */
330 cpriv
->pub
.cji_acctuser
= strdup(lbuff
);
334 cpriv
->pub
.cji_dfcount
++;
338 lbuff
= ctl_getline(cjinf
);
341 /* the 'H'ost and 'P'erson fields are *always* supposed to be there */
342 if (cpriv
->pub
.cji_accthost
== NULL
)
343 cpriv
->pub
.cji_accthost
= strdup(".na.");
344 if (cpriv
->pub
.cji_acctuser
== NULL
)
345 cpriv
->pub
.cji_acctuser
= strdup(".na.");
347 #ifdef DEBUGREADCF_FNAME
348 if (ctl_dbgfile
!= NULL
) {
349 if (cpriv
->cji_dumpit
)
350 ctl_dumpcji(ctl_dbgfile
, "end readcf", &(cpriv
->pub
));
355 return &(cpriv
->pub
);
359 * This routine renames the temporary control file as received from some
360 * other (remote) host. That file will almost always with `tfA*', because
361 * recvjob.c creates the file by changing `c' to `t' in the original name
362 * for the control file. Now if you read the RFC, you would think that all
363 * control filenames start with `cfA*'. However, it seems there are some
364 * implementations which send control filenames which start with `cf'
365 * followed by *any* letter, so this routine can not assume what the third
366 * letter will (or will not) be. Sigh.
368 * So this will rewrite the temporary file to `rf*' (correcting any lines
369 * which need correcting), rename that `rf*' file to `cf*', and then remove
370 * the original `tf*' temporary file.
372 * The *main* purpose of this routine is to be paranoid about the contents
373 * of that control file. It is partially meant to protect against people
374 * TRYING to cause trouble (perhaps after breaking into root of some host
375 * that this host will accept print jobs from). The fact that we're willing
376 * to print jobs from some remote host does not mean that we should blindly
377 * do anything that host tells us to do.
379 * This is also meant to protect us from errors in other implementations of
380 * lpr, particularly since we may want to use some values from the control
381 * file as environment variables when it comes time to print, or as parameters
382 * to commands which will be exec'ed, or values in statistics records.
384 * This may also do some "conversions" between how different versions of
385 * lpr or lprNG define the contents of various lines in a control file.
387 * If there is an error, it returns a pointer to a descriptive error message.
388 * Error messages which are RETURNED (as opposed to syslog-ed) do not include
389 * the printer-queue name. Let the caller add that if it is wanted.
392 ctl_renametf(const char *ptrname
, const char *tfname
)
394 int chk3rd
, newfd
, nogood
, res
;
396 struct cjobinfo
*cjinf
;
397 char *lbuff
, *slash
, *cp
;
398 char tfname2
[NAME_MAX
+1], cfname2
[NAME_MAX
+1];
399 char errm
[CTI_LINEMAX
];
401 #ifdef TRIGGERTEST_FNAME
403 res
= stat(TRIGGERTEST_FNAME
, &tstat
);
406 * if the trigger file does NOT exist in this spool directory,
407 * then do the exact same steps that the pre-ctlinfo code had
408 * been doing. Ie, very little.
410 strlcpy(cfname2
, tfname
, sizeof(cfname2
));
412 res
= link(tfname
, cfname2
);
414 snprintf(errm
, sizeof(errm
),
415 "ctl_renametf error link(%s,%s): %s", tfname
,
416 cfname2
, strerror(errno
));
423 cjinf
= NULL
; /* in case of early jump to error_ret */
424 newcf
= NULL
; /* in case of early jump to error_ret */
425 *errm
= '\0'; /* in case of early jump to error_ret */
428 if ((tfname
[0] != 't') || (tfname
[1] != 'f') || (!isalpha(chk3rd
))) {
429 snprintf(errm
, sizeof(errm
),
430 "ctl_renametf invalid filename: %s", tfname
);
434 cjinf
= ctl_readcf(ptrname
, tfname
);
436 snprintf(errm
, sizeof(errm
),
437 "ctl_renametf error cti_readcf(%s)", tfname
);
442 * This uses open+fdopen instead of fopen because that combination
443 * gives us greater control over file-creation issues.
445 strlcpy(tfname2
, tfname
, sizeof(tfname2
));
446 tfname2
[0] = 'r'; /* rf<letter><job><hostname> */
447 newfd
= open(tfname2
, O_WRONLY
|O_CREAT
|O_TRUNC
, 0660);
449 snprintf(errm
, sizeof(errm
),
450 "ctl_renametf error open(%s): %s", tfname2
,
454 newcf
= fdopen(newfd
, "w");
457 snprintf(errm
, sizeof(errm
),
458 "ctl_renametf error fopen(%s): %s", tfname2
,
464 * Do extra sanity checks on some key job-attribute fields, and
465 * write them out first (thus making sure they are written in the
466 * order we generally expect them to be in).
469 * Some lpr implementations on PC's set a null-string for their
470 * hostname. A MacOS 10 system which has not correctly setup
471 * /etc/hostconfig will claim a hostname of 'localhost'. Anything
472 * with blanks in it would be an invalid value for hostname. For
473 * any of these invalid hostname values, replace the given value
474 * with the name of the host that this job is coming from.
477 if (cjinf
->cji_accthost
== NULL
)
479 else if (strcmp(cjinf
->cji_accthost
, ".na.") == 0)
481 else if (strcmp(cjinf
->cji_accthost
, "localhost") == 0)
484 for (cp
= cjinf
->cji_accthost
; *cp
!= '\0'; cp
++) {
492 fprintf(newcf
, "H%s\n", from_host
);
494 fprintf(newcf
, "H%s\n", cjinf
->cji_accthost
);
497 * Now do some sanity checks on the 'P' (original userid) value. Note
498 * that the 'P'erson line is the second line which is ALWAYS supposed
499 * to be present in a control file.
501 * There is no particularly good value to use for replacements, but
502 * at least make sure the value is something reasonable to use in
503 * environment variables and statistics records. Again, some PC
504 * implementations send a null-string for a value. Various Mac
505 * implementations will set whatever string the user has set for
506 * their 'Owner Name', which usually includes blanks, etc.
509 if (cjinf
->cji_acctuser
== NULL
)
512 for (cp
= cjinf
->cji_acctuser
; *cp
!= '\0'; cp
++) {
518 fprintf(newcf
, "P%s\n", ".na.");
520 fprintf(newcf
, "P%s\n", cjinf
->cji_acctuser
);
522 /* No need for sanity checks on class, jobname, "literal" user. */
523 if (cjinf
->cji_class
!= NULL
)
524 fprintf(newcf
, "C%s\n", cjinf
->cji_class
);
525 if (cjinf
->cji_jobname
!= NULL
)
526 fprintf(newcf
, "J%s\n", cjinf
->cji_jobname
);
527 if (cjinf
->cji_username
!= NULL
)
528 fprintf(newcf
, "L%s\n", cjinf
->cji_username
);
531 * This should probably add more sanity checks on mailto value.
532 * Note that if the mailto value is "wrong", then there's no good
533 * way to know what the "correct" value would be, and we should not
534 * semd email to some random address. At least for now, just ignore
535 * any invalid values.
538 if (cjinf
->cji_mailto
== NULL
)
541 for (cp
= cjinf
->cji_acctuser
; *cp
!= '\0'; cp
++) {
549 fprintf(newcf
, "M%s\n", cjinf
->cji_mailto
);
552 * Now go thru the old control file, copying all information which
553 * hasn't already been written into the new file.
556 lbuff
= ctl_getline(cjinf
);
557 while (lbuff
!= NULL
) {
565 /* already wrote values for these to the newcf */
568 /* see comments under 'U'... */
569 if (cjinf
->cji_dfcount
== 0) {
570 /* in this case, 'N's will be done in 'U' */
573 fprintf(newcf
, "%s\n", lbuff
);
577 * check for the very common case where the remote
578 * host had to process 'lpr -s -r', but it did not
579 * remove the Unlink line from the control file.
580 * Such Unlink lines will legitimately have a '/' in
581 * them, but it is the original lpr host which would
582 * have done the unlink of such files, and not any
583 * host receiving that job.
585 slash
= strchr(lbuff
, '/');
587 break; /* skip this line */
590 * Okay, another kind of broken lpr implementation
591 * is one which send datafiles, and Unlink's those
592 * datafiles, but never includes any PRINT request
593 * for those files. Experimentation shows that one
594 * copy of those datafiles should be printed with a
595 * format of 'f'. If this is an example of such a
596 * screwed-up control file, fix it here.
598 if (cjinf
->cji_dfcount
== 0) {
600 if (strncmp(lbuff
, "df", (size_t)2) == 0) {
601 fprintf(newcf
, "f%s\n", lbuff
);
602 fprintf(newcf
, "U%s\n", lbuff
);
603 fprintf(newcf
, "N%s\n", lbuff
);
607 fprintf(newcf
, "%s\n", lbuff
);
610 fprintf(newcf
, "%s\n", lbuff
);
613 lbuff
= ctl_getline(cjinf
);
622 snprintf(errm
, sizeof(errm
),
623 "ctl_renametf error fclose(%s): %s", tfname2
,
628 strlcpy(cfname2
, tfname
, sizeof(cfname2
));
629 cfname2
[0] = 'c'; /* rename new file to 'cfA*' */
630 res
= link(tfname2
, cfname2
);
632 snprintf(errm
, sizeof(errm
),
633 "ctl_renametf error link(%s,%s): %s", tfname2
, cfname2
,
638 /* All the important work is done. Now just remove temp files */
639 #ifdef LEAVE_TMPCF_FILES
643 tfstat
.st_size
= 1; /* certainly invalid value */
644 res
= stat(tfname
, &tfstat
);
645 size1
= tfstat
.st_size
;
646 tfstat
.st_size
= 2; /* certainly invalid value */
647 res
= stat(tfname2
, &tfstat
);
648 /* if the sizes do not match, or either stat call failed,
649 * then do not remove the temp files, but return "all OK".
650 * This is just so I can see what this routine had changed.
652 if (size1
!= tfstat
.st_size
)
669 return strdup("ctl_renametf internal (missed) error");
673 ctl_rewindcf(struct cjobinfo
*cjinf
)
675 struct cjprivate
*cpriv
;
679 cpriv
= cjinf
->cji_priv
;
680 if ((cpriv
== NULL
) || (cpriv
!= cpriv
->pub
.cji_priv
)) {
681 syslog(LOG_ERR
, "in ctl_rewindcf(%p): invalid cjinf (cpriv %p)",
682 (void *)cjinf
, (void *)cpriv
);
686 rewind(cpriv
->cji_fstream
); /* assume no errors... :-) */
690 ctl_rmjob(const char *ptrname
, const char *cfname
)
692 struct cjobinfo
*cjinf
;
694 char errm
[CTI_LINEMAX
];
696 cjinf
= ctl_readcf(ptrname
, cfname
);
698 snprintf(errm
, sizeof(errm
),
699 "ctl_renametf error cti_readcf(%s)", cfname
);
704 lbuff
= ctl_getline(cjinf
);
705 while (lbuff
!= NULL
) {
706 /* obviously we need to fill in the following... */
715 lbuff
= ctl_getline(cjinf
);
725 * The following routine was originally written to pin down a bug. It is
726 * no longer needed for that problem, but may be useful to keep around for
730 ctl_dumpcji(FILE *dbg_stream
, const char *heading
, struct cjobinfo
*cjinf
)
732 #define PRINTSTR(xHdr,xStr) \
735 fprintf(dbg_stream, "%4d] %12s = ", ctl_dbgline, xHdr); \
737 fprintf(dbg_stream, "NULL\n"); \
739 fprintf(dbg_stream, "%p -> %s\n", astr, astr)
741 struct cjprivate
*cpriv
;
746 "ctl_dumpcji: ptr to cjobinfo for '%s' is NULL\n",
750 cpriv
= cjinf
->cji_priv
;
752 fprintf(dbg_stream
, "ctl_dumpcji: Dump '%s' of cjobinfo at %p->%p\n",
753 heading
, (void *)cjinf
, cpriv
->cji_buff
);
755 PRINTSTR("accthost.H", cpriv
->pub
.cji_accthost
);
756 PRINTSTR("acctuser.P", cpriv
->pub
.cji_acctuser
);
757 PRINTSTR("class.C", cpriv
->pub
.cji_class
);
758 PRINTSTR("cf-qname", cpriv
->pub
.cji_curqueue
);
759 PRINTSTR("cf-fname", cpriv
->pub
.cji_fname
);
760 PRINTSTR("jobname.J", cpriv
->pub
.cji_jobname
);
761 PRINTSTR("mailto.M", cpriv
->pub
.cji_mailto
);
762 PRINTSTR("hdruser.L", cpriv
->pub
.cji_username
);
765 fprintf(dbg_stream
, "%4d] %12s = ", ctl_dbgline
, "*cjprivate");
766 if (cpriv
->pub
.cji_priv
== NULL
)
767 fprintf(dbg_stream
, "NULL !!\n");
769 fprintf(dbg_stream
, "%p\n", (void *)cpriv
->pub
.cji_priv
);
771 fprintf(dbg_stream
, "|- - - - --> Dump '%s' complete\n", heading
);
773 /* flush output for the benefit of anyone doing a 'tail -f' */
780 * This routine reads in the next line from the control-file, and removes
781 * the trailing newline character.
783 * Historical note: Earlier versions of this routine did tab-expansion for
784 * ALL lines read in, which did not make any sense for most of the lines
785 * in a control file. For the lines where tab-expansion is useful, it will
786 * now have to be done by the calling routine.
789 ctl_getline(struct cjobinfo
*cjinf
)
792 struct cjprivate
*cpriv
;
796 cpriv
= cjinf
->cji_priv
;
797 if ((cpriv
== NULL
) || (cpriv
!= cpriv
->pub
.cji_priv
)) {
798 syslog(LOG_ERR
, "in ctl_getline(%p): invalid cjinf (cpriv %p)",
799 (void *)cjinf
, (void *)cpriv
);
804 strp
= fgets(cpriv
->cji_buff
, cpriv
->cji_buffsize
, cpriv
->cji_fstream
);
807 syslog(LOG_ERR
, "%s: ctl_getline error fgets(%s): %s",
808 cpriv
->pub
.cji_curqueue
, cpriv
->pub
.cji_fname
,
812 nl
= strchr(strp
, '\n');
816 #ifdef DEBUGREADCF_FNAME
817 /* I'd like to find out if the previous work to expand tabs was ever
818 * really used, and if so, on what lines and for what reason.
819 * Yes, all this work probably means I'm obsessed about this 'tab'
820 * issue, but isn't programming a matter of obsession?
828 for (ch
= strp
; *ch
!= '\0'; ch
++) {
833 if (tabcnt
&& (ctl_dbgfile
!= NULL
)) {
835 fprintf(ctl_dbgfile
, "%s: tabs=%d '%s'\n",
836 cpriv
->pub
.cji_fname
, tabcnt
, cpriv
->cji_buff
);