inet6: require RTF_ANNOUNCE to proxy NS

[dragonfly.git] / sys / netproto / 802_11 / wlan / ieee80211_proto.c

/*-
 * Copyright (c) 2001 Atsushi Onoe
 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
 * Copyright (c) 2012 IEEE
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * IEEE 802.11 protocol support.
 */

#include "opt_inet.h"
#include "opt_wlan.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>

#include <sys/socket.h>
#include <sys/sockio.h>

#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/ethernet.h>               /* XXX for ether_sprintf */

#if defined(__DragonFly__)
#include <net/ifq_var.h>
#endif

#include <netproto/802_11/ieee80211_var.h>
#include <netproto/802_11/ieee80211_adhoc.h>
#include <netproto/802_11/ieee80211_sta.h>
#include <netproto/802_11/ieee80211_hostap.h>
#include <netproto/802_11/ieee80211_wds.h>
#ifdef IEEE80211_SUPPORT_MESH
#include <netproto/802_11/ieee80211_mesh.h>
#endif
#include <netproto/802_11/ieee80211_monitor.h>
#include <netproto/802_11/ieee80211_input.h>

/* XXX tunables */
#define AGGRESSIVE_MODE_SWITCH_HYSTERESIS       3       /* pkts / 100ms */
#define HIGH_PRI_SWITCH_THRESH                  10      /* pkts / 100ms */

const char *mgt_subtype_name[] = {
        "assoc_req",    "assoc_resp",   "reassoc_req",  "reassoc_resp",
        "probe_req",    "probe_resp",   "timing_adv",   "reserved#7",
        "beacon",       "atim",         "disassoc",     "auth",
        "deauth",       "action",       "action_noack", "reserved#15"
};
const char *ctl_subtype_name[] = {
        "reserved#0",   "reserved#1",   "reserved#2",   "reserved#3",
        "reserved#4",   "reserved#5",   "reserved#6",   "control_wrap",
        "bar",          "ba",           "ps_poll",      "rts",
        "cts",          "ack",          "cf_end",       "cf_end_ack"
};
const char *ieee80211_opmode_name[IEEE80211_OPMODE_MAX] = {
        "IBSS",         /* IEEE80211_M_IBSS */
        "STA",          /* IEEE80211_M_STA */
        "WDS",          /* IEEE80211_M_WDS */
        "AHDEMO",       /* IEEE80211_M_AHDEMO */
        "HOSTAP",       /* IEEE80211_M_HOSTAP */
        "MONITOR",      /* IEEE80211_M_MONITOR */
        "MBSS"          /* IEEE80211_M_MBSS */
};
const char *ieee80211_state_name[IEEE80211_S_MAX] = {
        "INIT",         /* IEEE80211_S_INIT */
        "SCAN",         /* IEEE80211_S_SCAN */
        "AUTH",         /* IEEE80211_S_AUTH */
        "ASSOC",        /* IEEE80211_S_ASSOC */
        "CAC",          /* IEEE80211_S_CAC */
        "RUN",          /* IEEE80211_S_RUN */
        "CSA",          /* IEEE80211_S_CSA */
        "SLEEP",        /* IEEE80211_S_SLEEP */
};
const char *ieee80211_wme_acnames[] = {
        "WME_AC_BE",
        "WME_AC_BK",
        "WME_AC_VI",
        "WME_AC_VO",
        "WME_UPSD",
};


/*
 * Reason code descriptions were (mostly) obtained from
 * IEEE Std 802.11-2012, pp. 442-445 Table 8-36.
 */
const char *
ieee80211_reason_to_string(uint16_t reason)
{
        switch (reason) {
        case IEEE80211_REASON_UNSPECIFIED:
                return ("unspecified");
        case IEEE80211_REASON_AUTH_EXPIRE:
                return ("previous authentication is expired");
        case IEEE80211_REASON_AUTH_LEAVE:
                return ("sending STA is leaving/has left IBSS or ESS");
        case IEEE80211_REASON_ASSOC_EXPIRE:
                return ("disassociated due to inactivity");
        case IEEE80211_REASON_ASSOC_TOOMANY:
                return ("too many associated STAs");
        case IEEE80211_REASON_NOT_AUTHED:
                return ("class 2 frame received from nonauthenticated STA");
        case IEEE80211_REASON_NOT_ASSOCED:
                return ("class 3 frame received from nonassociated STA");
        case IEEE80211_REASON_ASSOC_LEAVE:
                return ("sending STA is leaving/has left BSS");
        case IEEE80211_REASON_ASSOC_NOT_AUTHED:
                return ("STA requesting (re)association is not authenticated");
        case IEEE80211_REASON_DISASSOC_PWRCAP_BAD:
                return ("information in the Power Capability element is "
                        "unacceptable");
        case IEEE80211_REASON_DISASSOC_SUPCHAN_BAD:
                return ("information in the Supported Channels element is "
                        "unacceptable");
        case IEEE80211_REASON_IE_INVALID:
                return ("invalid element");
        case IEEE80211_REASON_MIC_FAILURE:
                return ("MIC failure");
        case IEEE80211_REASON_4WAY_HANDSHAKE_TIMEOUT:
                return ("4-Way handshake timeout");
        case IEEE80211_REASON_GROUP_KEY_UPDATE_TIMEOUT:
                return ("group key update timeout");
        case IEEE80211_REASON_IE_IN_4WAY_DIFFERS:
                return ("element in 4-Way handshake different from "
                        "(re)association request/probe response/beacon frame");
        case IEEE80211_REASON_GROUP_CIPHER_INVALID:
                return ("invalid group cipher");
        case IEEE80211_REASON_PAIRWISE_CIPHER_INVALID:
                return ("invalid pairwise cipher");
        case IEEE80211_REASON_AKMP_INVALID:
                return ("invalid AKMP");
        case IEEE80211_REASON_UNSUPP_RSN_IE_VERSION:
                return ("unsupported version in RSN IE");
        case IEEE80211_REASON_INVALID_RSN_IE_CAP:
                return ("invalid capabilities in RSN IE");
        case IEEE80211_REASON_802_1X_AUTH_FAILED:
                return ("IEEE 802.1X authentication failed");
        case IEEE80211_REASON_CIPHER_SUITE_REJECTED:
                return ("cipher suite rejected because of the security "
                        "policy");
        case IEEE80211_REASON_UNSPECIFIED_QOS:
                return ("unspecified (QoS-related)");
        case IEEE80211_REASON_INSUFFICIENT_BW:
                return ("QoS AP lacks sufficient bandwidth for this QoS STA");
        case IEEE80211_REASON_TOOMANY_FRAMES:
                return ("too many frames need to be acknowledged");
        case IEEE80211_REASON_OUTSIDE_TXOP:
                return ("STA is transmitting outside the limits of its TXOPs");
        case IEEE80211_REASON_LEAVING_QBSS:
                return ("requested from peer STA (the STA is "
                        "resetting/leaving the BSS)");
        case IEEE80211_REASON_BAD_MECHANISM:
                return ("requested from peer STA (it does not want to use "
                        "the mechanism)");
        case IEEE80211_REASON_SETUP_NEEDED:
                return ("requested from peer STA (setup is required for the "
                        "used mechanism)");
        case IEEE80211_REASON_TIMEOUT:
                return ("requested from peer STA (timeout)");
        case IEEE80211_REASON_PEER_LINK_CANCELED:
                return ("SME cancels the mesh peering instance (not related "
                        "to the maximum number of peer mesh STAs)");
        case IEEE80211_REASON_MESH_MAX_PEERS:
                return ("maximum number of peer mesh STAs was reached");
        case IEEE80211_REASON_MESH_CPVIOLATION:
                return ("the received information violates the Mesh "
                        "Configuration policy configured in the mesh STA "
                        "profile");
        case IEEE80211_REASON_MESH_CLOSE_RCVD:
                return ("the mesh STA has received a Mesh Peering Close "
                        "message requesting to close the mesh peering");
        case IEEE80211_REASON_MESH_MAX_RETRIES:
                return ("the mesh STA has resent dot11MeshMaxRetries Mesh "
                        "Peering Open messages, without receiving a Mesh "
                        "Peering Confirm message");
        case IEEE80211_REASON_MESH_CONFIRM_TIMEOUT:
                return ("the confirmTimer for the mesh peering instance times "
                        "out");
        case IEEE80211_REASON_MESH_INVALID_GTK:
                return ("the mesh STA fails to unwrap the GTK or the values "
                        "in the wrapped contents do not match");
        case IEEE80211_REASON_MESH_INCONS_PARAMS:
                return ("the mesh STA receives inconsistent information about "
                        "the mesh parameters between Mesh Peering Management "
                        "frames");
        case IEEE80211_REASON_MESH_INVALID_SECURITY:
                return ("the mesh STA fails the authenticated mesh peering "
                        "exchange because due to failure in selecting "
                        "pairwise/group ciphersuite");
        case IEEE80211_REASON_MESH_PERR_NO_PROXY:
                return ("the mesh STA does not have proxy information for "
                        "this external destination");
        case IEEE80211_REASON_MESH_PERR_NO_FI:
                return ("the mesh STA does not have forwarding information "
                        "for this destination");
        case IEEE80211_REASON_MESH_PERR_DEST_UNREACH:
                return ("the mesh STA determines that the link to the next "
                        "hop of an active path in its forwarding information "
                        "is no longer usable");
        case IEEE80211_REASON_MESH_MAC_ALRDY_EXISTS_MBSS:
                return ("the MAC address of the STA already exists in the "
                        "mesh BSS");
        case IEEE80211_REASON_MESH_CHAN_SWITCH_REG:
                return ("the mesh STA performs channel switch to meet "
                        "regulatory requirements");
        case IEEE80211_REASON_MESH_CHAN_SWITCH_UNSPEC:
                return ("the mesh STA performs channel switch with "
                        "unspecified reason");
        default:
                return ("reserved/unknown");
        }
}

static void beacon_miss(void *, int);
static void beacon_swmiss(void *, int);
static void parent_updown(void *, int);
static void update_mcast(void *, int);
static void update_promisc(void *, int);
static void update_channel(void *, int);
static void update_chw(void *, int);
static void update_wme(void *, int);
static void restart_vaps(void *, int);
static void ieee80211_newstate_cb(void *, int);

static int
null_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
        const struct ieee80211_bpf_params *params)
{

        ic_printf(ni->ni_ic, "missing ic_raw_xmit callback, drop frame\n");
        m_freem(m);
        return ENETDOWN;
}

void
ieee80211_proto_attach(struct ieee80211com *ic)
{
        uint8_t hdrlen;

        /* override the 802.3 setting */
        hdrlen = ic->ic_headroom
                + sizeof(struct ieee80211_qosframe_addr4)
                + IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN
                + IEEE80211_WEP_EXTIVLEN;
        /* XXX no way to recalculate on ifdetach */
        if (ALIGN(hdrlen) > max_linkhdr) {
                /* XXX sanity check... */
                max_linkhdr = ALIGN(hdrlen);
                max_hdr = max_linkhdr + max_protohdr;
                max_datalen = MHLEN - max_hdr;
        }
        ic->ic_protmode = IEEE80211_PROT_CTSONLY;

        TASK_INIT(&ic->ic_parent_task, 0, parent_updown, ic);
        TASK_INIT(&ic->ic_mcast_task, 0, update_mcast, ic);
        TASK_INIT(&ic->ic_promisc_task, 0, update_promisc, ic);
        TASK_INIT(&ic->ic_chan_task, 0, update_channel, ic);
        TASK_INIT(&ic->ic_bmiss_task, 0, beacon_miss, ic);
        TASK_INIT(&ic->ic_chw_task, 0, update_chw, ic);
        TASK_INIT(&ic->ic_wme_task, 0, update_wme, ic);
        TASK_INIT(&ic->ic_restart_task, 0, restart_vaps, ic);

        ic->ic_wme.wme_hipri_switch_hysteresis =
                AGGRESSIVE_MODE_SWITCH_HYSTERESIS;

        /* initialize management frame handlers */
        ic->ic_send_mgmt = ieee80211_send_mgmt;
        ic->ic_raw_xmit = null_raw_xmit;

        ieee80211_adhoc_attach(ic);
        ieee80211_sta_attach(ic);
        ieee80211_wds_attach(ic);
        ieee80211_hostap_attach(ic);
#ifdef IEEE80211_SUPPORT_MESH
        ieee80211_mesh_attach(ic);
#endif
        ieee80211_monitor_attach(ic);
}

void
ieee80211_proto_detach(struct ieee80211com *ic)
{
        ieee80211_monitor_detach(ic);
#ifdef IEEE80211_SUPPORT_MESH
        ieee80211_mesh_detach(ic);
#endif
        ieee80211_hostap_detach(ic);
        ieee80211_wds_detach(ic);
        ieee80211_adhoc_detach(ic);
        ieee80211_sta_detach(ic);
}

static void
null_update_beacon(struct ieee80211vap *vap, int item)
{
}

void
ieee80211_proto_vattach(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;
        struct ifnet *ifp = vap->iv_ifp;
        int i;

        /* override the 802.3 setting */
        ifp->if_hdrlen = ic->ic_headroom
                + sizeof(struct ieee80211_qosframe_addr4)
                + IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN
                + IEEE80211_WEP_EXTIVLEN;

        vap->iv_rtsthreshold = IEEE80211_RTS_DEFAULT;
        vap->iv_fragthreshold = IEEE80211_FRAG_DEFAULT;
        vap->iv_bmiss_max = IEEE80211_BMISS_MAX;
        callout_init_mtx(&vap->iv_swbmiss, IEEE80211_LOCK_OBJ(ic), 0);
#if defined(__DragonFly__)
        callout_init_mp(&vap->iv_mgtsend);
#else
        callout_init(&vap->iv_mgtsend, 1);
#endif
        TASK_INIT(&vap->iv_nstate_task, 0, ieee80211_newstate_cb, vap);
        TASK_INIT(&vap->iv_swbmiss_task, 0, beacon_swmiss, vap);
        /*
         * Install default tx rate handling: no fixed rate, lowest
         * supported rate for mgmt and multicast frames.  Default
         * max retry count.  These settings can be changed by the
         * driver and/or user applications.
         */
        for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) {
                const struct ieee80211_rateset *rs = &ic->ic_sup_rates[i];

                vap->iv_txparms[i].ucastrate = IEEE80211_FIXED_RATE_NONE;

                /*
                 * Setting the management rate to MCS 0 assumes that the
                 * BSS Basic rate set is empty and the BSS Basic MCS set
                 * is not.
                 *
                 * Since we're not checking this, default to the lowest
                 * defined rate for this mode.
                 *
                 * At least one 11n AP (DLINK DIR-825) is reported to drop
                 * some MCS management traffic (eg BA response frames.)
                 *
                 * See also: 9.6.0 of the 802.11n-2009 specification.
                 */
#ifdef  NOTYET
                if (i == IEEE80211_MODE_11NA || i == IEEE80211_MODE_11NG) {
                        vap->iv_txparms[i].mgmtrate = 0 | IEEE80211_RATE_MCS;
                        vap->iv_txparms[i].mcastrate = 0 | IEEE80211_RATE_MCS;
                } else {
                        vap->iv_txparms[i].mgmtrate =
                            rs->rs_rates[0] & IEEE80211_RATE_VAL;
                        vap->iv_txparms[i].mcastrate = 
                            rs->rs_rates[0] & IEEE80211_RATE_VAL;
                }
#endif
                vap->iv_txparms[i].mgmtrate = rs->rs_rates[0] & IEEE80211_RATE_VAL;
                vap->iv_txparms[i].mcastrate = rs->rs_rates[0] & IEEE80211_RATE_VAL;
                vap->iv_txparms[i].maxretry = IEEE80211_TXMAX_DEFAULT;
        }
        vap->iv_roaming = IEEE80211_ROAMING_AUTO;

        vap->iv_update_beacon = null_update_beacon;
        vap->iv_deliver_data = ieee80211_deliver_data;

        /* attach support for operating mode */
        ic->ic_vattach[vap->iv_opmode](vap);
}

void
ieee80211_proto_vdetach(struct ieee80211vap *vap)
{
#define FREEAPPIE(ie) do { \
        if (ie != NULL) \
                IEEE80211_FREE(ie, M_80211_NODE_IE); \
} while (0)
        /*
         * Detach operating mode module.
         */
        if (vap->iv_opdetach != NULL)
                vap->iv_opdetach(vap);
        /*
         * This should not be needed as we detach when reseting
         * the state but be conservative here since the
         * authenticator may do things like spawn kernel threads.
         */
        if (vap->iv_auth->ia_detach != NULL)
                vap->iv_auth->ia_detach(vap);
        /*
         * Detach any ACL'ator.
         */
        if (vap->iv_acl != NULL)
                vap->iv_acl->iac_detach(vap);

        FREEAPPIE(vap->iv_appie_beacon);
        FREEAPPIE(vap->iv_appie_probereq);
        FREEAPPIE(vap->iv_appie_proberesp);
        FREEAPPIE(vap->iv_appie_assocreq);
        FREEAPPIE(vap->iv_appie_assocresp);
        FREEAPPIE(vap->iv_appie_wpa);
#undef FREEAPPIE
}

/*
 * Simple-minded authenticator module support.
 */

#define IEEE80211_AUTH_MAX      (IEEE80211_AUTH_WPA+1)
/* XXX well-known names */
static const char *auth_modnames[IEEE80211_AUTH_MAX] = {
        "wlan_internal",        /* IEEE80211_AUTH_NONE */
        "wlan_internal",        /* IEEE80211_AUTH_OPEN */
        "wlan_internal",        /* IEEE80211_AUTH_SHARED */
        "wlan_xauth",           /* IEEE80211_AUTH_8021X  */
        "wlan_internal",        /* IEEE80211_AUTH_AUTO */
        "wlan_xauth",           /* IEEE80211_AUTH_WPA */
};
static const struct ieee80211_authenticator *authenticators[IEEE80211_AUTH_MAX];

static const struct ieee80211_authenticator auth_internal = {
        .ia_name                = "wlan_internal",
        .ia_attach              = NULL,
        .ia_detach              = NULL,
        .ia_node_join           = NULL,
        .ia_node_leave          = NULL,
};

/*
 * Setup internal authenticators once; they are never unregistered.
 */
static void
ieee80211_auth_setup(void)
{
        ieee80211_authenticator_register(IEEE80211_AUTH_OPEN, &auth_internal);
        ieee80211_authenticator_register(IEEE80211_AUTH_SHARED, &auth_internal);
        ieee80211_authenticator_register(IEEE80211_AUTH_AUTO, &auth_internal);
}
SYSINIT(wlan_auth, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_auth_setup, NULL);

const struct ieee80211_authenticator *
ieee80211_authenticator_get(int auth)
{
        if (auth >= IEEE80211_AUTH_MAX)
                return NULL;
        if (authenticators[auth] == NULL)
                ieee80211_load_module(auth_modnames[auth]);
        return authenticators[auth];
}

void
ieee80211_authenticator_register(int type,
        const struct ieee80211_authenticator *auth)
{
        if (type >= IEEE80211_AUTH_MAX)
                return;
        authenticators[type] = auth;
}

void
ieee80211_authenticator_unregister(int type)
{

        if (type >= IEEE80211_AUTH_MAX)
                return;
        authenticators[type] = NULL;
}

/*
 * Very simple-minded ACL module support.
 */
/* XXX just one for now */
static  const struct ieee80211_aclator *acl = NULL;

void
ieee80211_aclator_register(const struct ieee80211_aclator *iac)
{
        kprintf("wlan: %s acl policy registered\n", iac->iac_name);
        acl = iac;
}

void
ieee80211_aclator_unregister(const struct ieee80211_aclator *iac)
{
        if (acl == iac)
                acl = NULL;
        kprintf("wlan: %s acl policy unregistered\n", iac->iac_name);
}

const struct ieee80211_aclator *
ieee80211_aclator_get(const char *name)
{
        if (acl == NULL)
                ieee80211_load_module("wlan_acl");
        return acl != NULL && strcmp(acl->iac_name, name) == 0 ? acl : NULL;
}

void
ieee80211_print_essid(const uint8_t *essid, int len)
{
        const uint8_t *p;
        int i;

        if (len > IEEE80211_NWID_LEN)
                len = IEEE80211_NWID_LEN;
        /* determine printable or not */
        for (i = 0, p = essid; i < len; i++, p++) {
                if (*p < ' ' || *p > 0x7e)
                        break;
        }
        if (i == len) {
                kprintf("\"");
                for (i = 0, p = essid; i < len; i++, p++)
                        kprintf("%c", *p);
                kprintf("\"");
        } else {
                kprintf("0x");
                for (i = 0, p = essid; i < len; i++, p++)
                        kprintf("%02x", *p);
        }
}

void
ieee80211_dump_pkt(struct ieee80211com *ic,
        const uint8_t *buf, int len, int rate, int rssi)
{
        const struct ieee80211_frame *wh;
        int i;

        wh = (const struct ieee80211_frame *)buf;
        switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
        case IEEE80211_FC1_DIR_NODS:
                kprintf("NODS %s", ether_sprintf(wh->i_addr2));
                kprintf("->%s", ether_sprintf(wh->i_addr1));
                kprintf("(%s)", ether_sprintf(wh->i_addr3));
                break;
        case IEEE80211_FC1_DIR_TODS:
                kprintf("TODS %s", ether_sprintf(wh->i_addr2));
                kprintf("->%s", ether_sprintf(wh->i_addr3));
                kprintf("(%s)", ether_sprintf(wh->i_addr1));
                break;
        case IEEE80211_FC1_DIR_FROMDS:
                kprintf("FRDS %s", ether_sprintf(wh->i_addr3));
                kprintf("->%s", ether_sprintf(wh->i_addr1));
                kprintf("(%s)", ether_sprintf(wh->i_addr2));
                break;
        case IEEE80211_FC1_DIR_DSTODS:
                kprintf("DSDS %s", ether_sprintf((const uint8_t *)&wh[1]));
                kprintf("->%s", ether_sprintf(wh->i_addr3));
                kprintf("(%s", ether_sprintf(wh->i_addr2));
                kprintf("->%s)", ether_sprintf(wh->i_addr1));
                break;
        }
        switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
        case IEEE80211_FC0_TYPE_DATA:
                kprintf(" data");
                break;
        case IEEE80211_FC0_TYPE_MGT:
                kprintf(" %s", ieee80211_mgt_subtype_name(wh->i_fc[0]));
                break;
        default:
                kprintf(" type#%d", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK);
                break;
        }
        if (IEEE80211_QOS_HAS_SEQ(wh)) {
                const struct ieee80211_qosframe *qwh = 
                        (const struct ieee80211_qosframe *)buf;
                kprintf(" QoS [TID %u%s]", qwh->i_qos[0] & IEEE80211_QOS_TID,
                        qwh->i_qos[0] & IEEE80211_QOS_ACKPOLICY ? " ACM" : "");
        }
        if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
                int off;

                off = ieee80211_anyhdrspace(ic, wh);
                kprintf(" WEP [IV %.02x %.02x %.02x",
                        buf[off+0], buf[off+1], buf[off+2]);
                if (buf[off+IEEE80211_WEP_IVLEN] & IEEE80211_WEP_EXTIV)
                        kprintf(" %.02x %.02x %.02x",
                                buf[off+4], buf[off+5], buf[off+6]);
                kprintf(" KID %u]", buf[off+IEEE80211_WEP_IVLEN] >> 6);
        }
        if (rate >= 0)
                kprintf(" %dM", rate / 2);
        if (rssi >= 0)
                kprintf(" +%d", rssi);
        kprintf("\n");
        if (len > 0) {
                for (i = 0; i < len; i++) {
                        if ((i & 1) == 0)
                                kprintf(" ");
                        kprintf("%02x", buf[i]);
                }
                kprintf("\n");
        }
}

static __inline int
findrix(const struct ieee80211_rateset *rs, int r)
{
        int i;

        for (i = 0; i < rs->rs_nrates; i++)
                if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == r)
                        return i;
        return -1;
}

int
ieee80211_fix_rate(struct ieee80211_node *ni,
        struct ieee80211_rateset *nrs, int flags)
{
        struct ieee80211vap *vap = ni->ni_vap;
        struct ieee80211com *ic = ni->ni_ic;
        int i, j, rix, error;
        int okrate, badrate, fixedrate, ucastrate;
        const struct ieee80211_rateset *srs;
        uint8_t r;

        error = 0;
        okrate = badrate = 0;
        ucastrate = vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)].ucastrate;
        if (ucastrate != IEEE80211_FIXED_RATE_NONE) {
                /*
                 * Workaround awkwardness with fixed rate.  We are called
                 * to check both the legacy rate set and the HT rate set
                 * but we must apply any legacy fixed rate check only to the
                 * legacy rate set and vice versa.  We cannot tell what type
                 * of rate set we've been given (legacy or HT) but we can
                 * distinguish the fixed rate type (MCS have 0x80 set).
                 * So to deal with this the caller communicates whether to
                 * check MCS or legacy rate using the flags and we use the
                 * type of any fixed rate to avoid applying an MCS to a
                 * legacy rate and vice versa.
                 */
                if (ucastrate & 0x80) {
                        if (flags & IEEE80211_F_DOFRATE)
                                flags &= ~IEEE80211_F_DOFRATE;
                } else if ((ucastrate & 0x80) == 0) {
                        if (flags & IEEE80211_F_DOFMCS)
                                flags &= ~IEEE80211_F_DOFMCS;
                }
                /* NB: required to make MCS match below work */
                ucastrate &= IEEE80211_RATE_VAL;
        }
        fixedrate = IEEE80211_FIXED_RATE_NONE;
        /*
         * XXX we are called to process both MCS and legacy rates;
         * we must use the appropriate basic rate set or chaos will
         * ensue; for now callers that want MCS must supply
         * IEEE80211_F_DOBRS; at some point we'll need to split this
         * function so there are two variants, one for MCS and one
         * for legacy rates.
         */
        if (flags & IEEE80211_F_DOBRS)
                srs = (const struct ieee80211_rateset *)
                    ieee80211_get_suphtrates(ic, ni->ni_chan);
        else
                srs = ieee80211_get_suprates(ic, ni->ni_chan);
        for (i = 0; i < nrs->rs_nrates; ) {
                if (flags & IEEE80211_F_DOSORT) {
                        /*
                         * Sort rates.
                         */
                        for (j = i + 1; j < nrs->rs_nrates; j++) {
                                if (IEEE80211_RV(nrs->rs_rates[i]) >
                                    IEEE80211_RV(nrs->rs_rates[j])) {
                                        r = nrs->rs_rates[i];
                                        nrs->rs_rates[i] = nrs->rs_rates[j];
                                        nrs->rs_rates[j] = r;
                                }
                        }
                }
                r = nrs->rs_rates[i] & IEEE80211_RATE_VAL;
                badrate = r;
                /*
                 * Check for fixed rate.
                 */
                if (r == ucastrate)
                        fixedrate = r;
                /*
                 * Check against supported rates.
                 */
                rix = findrix(srs, r);
                if (flags & IEEE80211_F_DONEGO) {
                        if (rix < 0) {
                                /*
                                 * A rate in the node's rate set is not
                                 * supported.  If this is a basic rate and we
                                 * are operating as a STA then this is an error.
                                 * Otherwise we just discard/ignore the rate.
                                 */
                                if ((flags & IEEE80211_F_JOIN) &&
                                    (nrs->rs_rates[i] & IEEE80211_RATE_BASIC))
                                        error++;
                        } else if ((flags & IEEE80211_F_JOIN) == 0) {
                                /*
                                 * Overwrite with the supported rate
                                 * value so any basic rate bit is set.
                                 */
                                nrs->rs_rates[i] = srs->rs_rates[rix];
                        }
                }
                if ((flags & IEEE80211_F_DODEL) && rix < 0) {
                        /*
                         * Delete unacceptable rates.
                         */
                        nrs->rs_nrates--;
                        for (j = i; j < nrs->rs_nrates; j++)
                                nrs->rs_rates[j] = nrs->rs_rates[j + 1];
                        nrs->rs_rates[j] = 0;
                        continue;
                }
                if (rix >= 0)
                        okrate = nrs->rs_rates[i];
                i++;
        }
        if (okrate == 0 || error != 0 ||
            ((flags & (IEEE80211_F_DOFRATE|IEEE80211_F_DOFMCS)) &&
             fixedrate != ucastrate)) {
                IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni,
                    "%s: flags 0x%x okrate %d error %d fixedrate 0x%x "
                    "ucastrate %x\n", __func__, flags, okrate, error,
                    fixedrate, ucastrate);
                return badrate | IEEE80211_RATE_BASIC;
        } else
                return IEEE80211_RV(okrate);
}

/*
 * Reset 11g-related state.
 */
void
ieee80211_reset_erp(struct ieee80211com *ic)
{
        ic->ic_flags &= ~IEEE80211_F_USEPROT;
        ic->ic_nonerpsta = 0;
        ic->ic_longslotsta = 0;
        /*
         * Short slot time is enabled only when operating in 11g
         * and not in an IBSS.  We must also honor whether or not
         * the driver is capable of doing it.
         */
        ieee80211_set_shortslottime(ic,
                IEEE80211_IS_CHAN_A(ic->ic_curchan) ||
                IEEE80211_IS_CHAN_HT(ic->ic_curchan) ||
                (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) &&
                ic->ic_opmode == IEEE80211_M_HOSTAP &&
                (ic->ic_caps & IEEE80211_C_SHSLOT)));
        /*
         * Set short preamble and ERP barker-preamble flags.
         */
        if (IEEE80211_IS_CHAN_A(ic->ic_curchan) ||
            (ic->ic_caps & IEEE80211_C_SHPREAMBLE)) {
                ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
                ic->ic_flags &= ~IEEE80211_F_USEBARKER;
        } else {
                ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE;
                ic->ic_flags |= IEEE80211_F_USEBARKER;
        }
}

/*
 * Set the short slot time state and notify the driver.
 */
void
ieee80211_set_shortslottime(struct ieee80211com *ic, int onoff)
{
        if (onoff)
                ic->ic_flags |= IEEE80211_F_SHSLOT;
        else
                ic->ic_flags &= ~IEEE80211_F_SHSLOT;
        /* notify driver */
        if (ic->ic_updateslot != NULL)
                ic->ic_updateslot(ic);
}

/*
 * Check if the specified rate set supports ERP.
 * NB: the rate set is assumed to be sorted.
 */
int
ieee80211_iserp_rateset(const struct ieee80211_rateset *rs)
{
        static const int rates[] = { 2, 4, 11, 22, 12, 24, 48 };
        int i, j;

        if (rs->rs_nrates < nitems(rates))
                return 0;
        for (i = 0; i < nitems(rates); i++) {
                for (j = 0; j < rs->rs_nrates; j++) {
                        int r = rs->rs_rates[j] & IEEE80211_RATE_VAL;
                        if (rates[i] == r)
                                goto next;
                        if (r > rates[i])
                                return 0;
                }
                return 0;
        next:
                ;
        }
        return 1;
}

/*
 * Mark the basic rates for the rate table based on the
 * operating mode.  For real 11g we mark all the 11b rates
 * and 6, 12, and 24 OFDM.  For 11b compatibility we mark only
 * 11b rates.  There's also a pseudo 11a-mode used to mark only
 * the basic OFDM rates.
 */
static void
setbasicrates(struct ieee80211_rateset *rs,
    enum ieee80211_phymode mode, int add)
{
        static const struct ieee80211_rateset basic[IEEE80211_MODE_MAX] = {
            [IEEE80211_MODE_11A]        = { 3, { 12, 24, 48 } },
            [IEEE80211_MODE_11B]        = { 2, { 2, 4 } },
                                            /* NB: mixed b/g */
            [IEEE80211_MODE_11G]        = { 4, { 2, 4, 11, 22 } },
            [IEEE80211_MODE_TURBO_A]    = { 3, { 12, 24, 48 } },
            [IEEE80211_MODE_TURBO_G]    = { 4, { 2, 4, 11, 22 } },
            [IEEE80211_MODE_STURBO_A]   = { 3, { 12, 24, 48 } },
            [IEEE80211_MODE_HALF]       = { 3, { 6, 12, 24 } },
            [IEEE80211_MODE_QUARTER]    = { 3, { 3, 6, 12 } },
            [IEEE80211_MODE_11NA]       = { 3, { 12, 24, 48 } },
                                            /* NB: mixed b/g */
            [IEEE80211_MODE_11NG]       = { 4, { 2, 4, 11, 22 } },
        };
        int i, j;

        for (i = 0; i < rs->rs_nrates; i++) {
                if (!add)
                        rs->rs_rates[i] &= IEEE80211_RATE_VAL;
                for (j = 0; j < basic[mode].rs_nrates; j++)
                        if (basic[mode].rs_rates[j] == rs->rs_rates[i]) {
                                rs->rs_rates[i] |= IEEE80211_RATE_BASIC;
                                break;
                        }
        }
}

/*
 * Set the basic rates in a rate set.
 */
void
ieee80211_setbasicrates(struct ieee80211_rateset *rs,
    enum ieee80211_phymode mode)
{
        setbasicrates(rs, mode, 0);
}

/*
 * Add basic rates to a rate set.
 */
void
ieee80211_addbasicrates(struct ieee80211_rateset *rs,
    enum ieee80211_phymode mode)
{
        setbasicrates(rs, mode, 1);
}

/*
 * WME protocol support.
 *
 * The default 11a/b/g/n parameters come from the WiFi Alliance WMM
 * System Interopability Test Plan (v1.4, Appendix F) and the 802.11n
 * Draft 2.0 Test Plan (Appendix D).
 *
 * Static/Dynamic Turbo mode settings come from Atheros.
 */
typedef struct phyParamType {
        uint8_t         aifsn;
        uint8_t         logcwmin;
        uint8_t         logcwmax;
        uint16_t        txopLimit;
        uint8_t         acm;
} paramType;

static const struct phyParamType phyParamForAC_BE[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_11A]    = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_11B]    = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_11G]    = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_FH]     = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_TURBO_A]= { 2, 3,  5,  0, 0 },
        [IEEE80211_MODE_TURBO_G]= { 2, 3,  5,  0, 0 },
        [IEEE80211_MODE_STURBO_A]={ 2, 3,  5,  0, 0 },
        [IEEE80211_MODE_HALF]   = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_QUARTER]= { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_11NA]   = { 3, 4,  6,  0, 0 },
        [IEEE80211_MODE_11NG]   = { 3, 4,  6,  0, 0 },
};
static const struct phyParamType phyParamForAC_BK[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_11A]    = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_11B]    = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_11G]    = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_FH]     = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_TURBO_A]= { 7, 3, 10,  0, 0 },
        [IEEE80211_MODE_TURBO_G]= { 7, 3, 10,  0, 0 },
        [IEEE80211_MODE_STURBO_A]={ 7, 3, 10,  0, 0 },
        [IEEE80211_MODE_HALF]   = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_QUARTER]= { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_11NA]   = { 7, 4, 10,  0, 0 },
        [IEEE80211_MODE_11NG]   = { 7, 4, 10,  0, 0 },
};
static const struct phyParamType phyParamForAC_VI[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_11A]    = { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_11B]    = { 1, 3, 4, 188, 0 },
        [IEEE80211_MODE_11G]    = { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_FH]     = { 1, 3, 4, 188, 0 },
        [IEEE80211_MODE_TURBO_A]= { 1, 2, 3,  94, 0 },
        [IEEE80211_MODE_TURBO_G]= { 1, 2, 3,  94, 0 },
        [IEEE80211_MODE_STURBO_A]={ 1, 2, 3,  94, 0 },
        [IEEE80211_MODE_HALF]   = { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_QUARTER]= { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_11NA]   = { 1, 3, 4,  94, 0 },
        [IEEE80211_MODE_11NG]   = { 1, 3, 4,  94, 0 },
};
static const struct phyParamType phyParamForAC_VO[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_11A]    = { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_11B]    = { 1, 2, 3, 102, 0 },
        [IEEE80211_MODE_11G]    = { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_FH]     = { 1, 2, 3, 102, 0 },
        [IEEE80211_MODE_TURBO_A]= { 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_TURBO_G]= { 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_STURBO_A]={ 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_HALF]   = { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_QUARTER]= { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_11NA]   = { 1, 2, 3,  47, 0 },
        [IEEE80211_MODE_11NG]   = { 1, 2, 3,  47, 0 },
};

static const struct phyParamType bssPhyParamForAC_BE[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_11A]    = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_11B]    = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_11G]    = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_FH]     = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_TURBO_A]= { 2, 3, 10,  0, 0 },
        [IEEE80211_MODE_TURBO_G]= { 2, 3, 10,  0, 0 },
        [IEEE80211_MODE_STURBO_A]={ 2, 3, 10,  0, 0 },
        [IEEE80211_MODE_HALF]   = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_QUARTER]= { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_11NA]   = { 3, 4, 10,  0, 0 },
        [IEEE80211_MODE_11NG]   = { 3, 4, 10,  0, 0 },
};
static const struct phyParamType bssPhyParamForAC_VI[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_11A]    = { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_11B]    = { 2, 3, 4, 188, 0 },
        [IEEE80211_MODE_11G]    = { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_FH]     = { 2, 3, 4, 188, 0 },
        [IEEE80211_MODE_TURBO_A]= { 2, 2, 3,  94, 0 },
        [IEEE80211_MODE_TURBO_G]= { 2, 2, 3,  94, 0 },
        [IEEE80211_MODE_STURBO_A]={ 2, 2, 3,  94, 0 },
        [IEEE80211_MODE_HALF]   = { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_QUARTER]= { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_11NA]   = { 2, 3, 4,  94, 0 },
        [IEEE80211_MODE_11NG]   = { 2, 3, 4,  94, 0 },
};
static const struct phyParamType bssPhyParamForAC_VO[IEEE80211_MODE_MAX] = {
        [IEEE80211_MODE_AUTO]   = { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_11A]    = { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_11B]    = { 2, 2, 3, 102, 0 },
        [IEEE80211_MODE_11G]    = { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_FH]     = { 2, 2, 3, 102, 0 },
        [IEEE80211_MODE_TURBO_A]= { 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_TURBO_G]= { 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_STURBO_A]={ 1, 2, 2,  47, 0 },
        [IEEE80211_MODE_HALF]   = { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_QUARTER]= { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_11NA]   = { 2, 2, 3,  47, 0 },
        [IEEE80211_MODE_11NG]   = { 2, 2, 3,  47, 0 },
};

static void
_setifsparams(struct wmeParams *wmep, const paramType *phy)
{
        wmep->wmep_aifsn = phy->aifsn;
        wmep->wmep_logcwmin = phy->logcwmin;    
        wmep->wmep_logcwmax = phy->logcwmax;            
        wmep->wmep_txopLimit = phy->txopLimit;
}

static void
setwmeparams(struct ieee80211vap *vap, const char *type, int ac,
        struct wmeParams *wmep, const paramType *phy)
{
        wmep->wmep_acm = phy->acm;
        _setifsparams(wmep, phy);

        IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME,
            "set %s (%s) [acm %u aifsn %u logcwmin %u logcwmax %u txop %u]\n",
            ieee80211_wme_acnames[ac], type,
            wmep->wmep_acm, wmep->wmep_aifsn, wmep->wmep_logcwmin,
            wmep->wmep_logcwmax, wmep->wmep_txopLimit);
}

static void
ieee80211_wme_initparams_locked(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;
        struct ieee80211_wme_state *wme = &ic->ic_wme;
        const paramType *pPhyParam, *pBssPhyParam;
        struct wmeParams *wmep;
        enum ieee80211_phymode mode;
        int i;

        IEEE80211_LOCK_ASSERT(ic);

        if ((ic->ic_caps & IEEE80211_C_WME) == 0 || ic->ic_nrunning > 1)
                return;

        /*
         * Clear the wme cap_info field so a qoscount from a previous
         * vap doesn't confuse later code which only parses the beacon
         * field and updates hardware when said field changes.
         * Otherwise the hardware is programmed with defaults, not what
         * the beacon actually announces.
         */
        wme->wme_wmeChanParams.cap_info = 0;

        /*
         * Select mode; we can be called early in which case we
         * always use auto mode.  We know we'll be called when
         * entering the RUN state with bsschan setup properly
         * so state will eventually get set correctly
         */
        if (ic->ic_bsschan != IEEE80211_CHAN_ANYC)
                mode = ieee80211_chan2mode(ic->ic_bsschan);
        else
                mode = IEEE80211_MODE_AUTO;
        for (i = 0; i < WME_NUM_AC; i++) {
                switch (i) {
                case WME_AC_BK:
                        pPhyParam = &phyParamForAC_BK[mode];
                        pBssPhyParam = &phyParamForAC_BK[mode];
                        break;
                case WME_AC_VI:
                        pPhyParam = &phyParamForAC_VI[mode];
                        pBssPhyParam = &bssPhyParamForAC_VI[mode];
                        break;
                case WME_AC_VO:
                        pPhyParam = &phyParamForAC_VO[mode];
                        pBssPhyParam = &bssPhyParamForAC_VO[mode];
                        break;
                case WME_AC_BE:
                default:
                        pPhyParam = &phyParamForAC_BE[mode];
                        pBssPhyParam = &bssPhyParamForAC_BE[mode];
                        break;
                }
                wmep = &wme->wme_wmeChanParams.cap_wmeParams[i];
                if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
                        setwmeparams(vap, "chan", i, wmep, pPhyParam);
                } else {
                        setwmeparams(vap, "chan", i, wmep, pBssPhyParam);
                }       
                wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i];
                setwmeparams(vap, "bss ", i, wmep, pBssPhyParam);
        }
        /* NB: check ic_bss to avoid NULL deref on initial attach */
        if (vap->iv_bss != NULL) {
                /*
                 * Calculate aggressive mode switching threshold based
                 * on beacon interval.  This doesn't need locking since
                 * we're only called before entering the RUN state at
                 * which point we start sending beacon frames.
                 */
                wme->wme_hipri_switch_thresh =
                        (HIGH_PRI_SWITCH_THRESH * vap->iv_bss->ni_intval) / 100;
                wme->wme_flags &= ~WME_F_AGGRMODE;
                ieee80211_wme_updateparams(vap);
        }
}

void
ieee80211_wme_initparams(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;

        IEEE80211_LOCK(ic);
        ieee80211_wme_initparams_locked(vap);
        IEEE80211_UNLOCK(ic);
}

/*
 * Update WME parameters for ourself and the BSS.
 */
void
ieee80211_wme_updateparams_locked(struct ieee80211vap *vap)
{
        static const paramType aggrParam[IEEE80211_MODE_MAX] = {
            [IEEE80211_MODE_AUTO]       = { 2, 4, 10, 64, 0 },
            [IEEE80211_MODE_11A]        = { 2, 4, 10, 64, 0 },
            [IEEE80211_MODE_11B]        = { 2, 5, 10, 64, 0 },
            [IEEE80211_MODE_11G]        = { 2, 4, 10, 64, 0 },
            [IEEE80211_MODE_FH]         = { 2, 5, 10, 64, 0 },
            [IEEE80211_MODE_TURBO_A]    = { 1, 3, 10, 64, 0 },
            [IEEE80211_MODE_TURBO_G]    = { 1, 3, 10, 64, 0 },
            [IEEE80211_MODE_STURBO_A]   = { 1, 3, 10, 64, 0 },
            [IEEE80211_MODE_HALF]       = { 2, 4, 10, 64, 0 },
            [IEEE80211_MODE_QUARTER]    = { 2, 4, 10, 64, 0 },
            [IEEE80211_MODE_11NA]       = { 2, 4, 10, 64, 0 },  /* XXXcheck*/
            [IEEE80211_MODE_11NG]       = { 2, 4, 10, 64, 0 },  /* XXXcheck*/
        };
        struct ieee80211com *ic = vap->iv_ic;
        struct ieee80211_wme_state *wme = &ic->ic_wme;
        const struct wmeParams *wmep;
        struct wmeParams *chanp, *bssp;
        enum ieee80211_phymode mode;
        int i;
        int do_aggrmode = 0;

        /*
         * Set up the channel access parameters for the physical
         * device.  First populate the configured settings.
         */
        for (i = 0; i < WME_NUM_AC; i++) {
                chanp = &wme->wme_chanParams.cap_wmeParams[i];
                wmep = &wme->wme_wmeChanParams.cap_wmeParams[i];
                chanp->wmep_aifsn = wmep->wmep_aifsn;
                chanp->wmep_logcwmin = wmep->wmep_logcwmin;
                chanp->wmep_logcwmax = wmep->wmep_logcwmax;
                chanp->wmep_txopLimit = wmep->wmep_txopLimit;

                chanp = &wme->wme_bssChanParams.cap_wmeParams[i];
                wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i];
                chanp->wmep_aifsn = wmep->wmep_aifsn;
                chanp->wmep_logcwmin = wmep->wmep_logcwmin;
                chanp->wmep_logcwmax = wmep->wmep_logcwmax;
                chanp->wmep_txopLimit = wmep->wmep_txopLimit;
        }

        /*
         * Select mode; we can be called early in which case we
         * always use auto mode.  We know we'll be called when
         * entering the RUN state with bsschan setup properly
         * so state will eventually get set correctly
         */
        if (ic->ic_bsschan != IEEE80211_CHAN_ANYC)
                mode = ieee80211_chan2mode(ic->ic_bsschan);
        else
                mode = IEEE80211_MODE_AUTO;

        /*
         * This implements aggressive mode as found in certain
         * vendors' AP's.  When there is significant high
         * priority (VI/VO) traffic in the BSS throttle back BE
         * traffic by using conservative parameters.  Otherwise
         * BE uses aggressive params to optimize performance of
         * legacy/non-QoS traffic.
         */

        /* Hostap? Only if aggressive mode is enabled */
        if (vap->iv_opmode == IEEE80211_M_HOSTAP &&
             (wme->wme_flags & WME_F_AGGRMODE) != 0)
                do_aggrmode = 1;

        /*
         * Station? Only if we're in a non-QoS BSS.
         */
        else if ((vap->iv_opmode == IEEE80211_M_STA &&
             (vap->iv_bss->ni_flags & IEEE80211_NODE_QOS) == 0))
                do_aggrmode = 1;

        /*
         * IBSS? Only if we we have WME enabled.
         */
        else if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
            (vap->iv_flags & IEEE80211_F_WME))
                do_aggrmode = 1;

        /*
         * If WME is disabled on this VAP, default to aggressive mode
         * regardless of the configuration.
         */
        if ((vap->iv_flags & IEEE80211_F_WME) == 0)
                do_aggrmode = 1;

        /* XXX WDS? */

        /* XXX MBSS? */

        if (do_aggrmode) {
                chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE];
                bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE];

                chanp->wmep_aifsn = bssp->wmep_aifsn = aggrParam[mode].aifsn;
                chanp->wmep_logcwmin = bssp->wmep_logcwmin =
                    aggrParam[mode].logcwmin;
                chanp->wmep_logcwmax = bssp->wmep_logcwmax =
                    aggrParam[mode].logcwmax;
                chanp->wmep_txopLimit = bssp->wmep_txopLimit =
                    (vap->iv_flags & IEEE80211_F_BURST) ?
                        aggrParam[mode].txopLimit : 0;          
                IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME,
                    "update %s (chan+bss) [acm %u aifsn %u logcwmin %u "
                    "logcwmax %u txop %u]\n", ieee80211_wme_acnames[WME_AC_BE],
                    chanp->wmep_acm, chanp->wmep_aifsn, chanp->wmep_logcwmin,
                    chanp->wmep_logcwmax, chanp->wmep_txopLimit);
        }


        /*
         * Change the contention window based on the number of associated
         * stations.  If the number of associated stations is 1 and
         * aggressive mode is enabled, lower the contention window even
         * further.
         */
        if (vap->iv_opmode == IEEE80211_M_HOSTAP &&
            ic->ic_sta_assoc < 2 && (wme->wme_flags & WME_F_AGGRMODE) != 0) {
                static const uint8_t logCwMin[IEEE80211_MODE_MAX] = {
                    [IEEE80211_MODE_AUTO]       = 3,
                    [IEEE80211_MODE_11A]        = 3,
                    [IEEE80211_MODE_11B]        = 4,
                    [IEEE80211_MODE_11G]        = 3,
                    [IEEE80211_MODE_FH]         = 4,
                    [IEEE80211_MODE_TURBO_A]    = 3,
                    [IEEE80211_MODE_TURBO_G]    = 3,
                    [IEEE80211_MODE_STURBO_A]   = 3,
                    [IEEE80211_MODE_HALF]       = 3,
                    [IEEE80211_MODE_QUARTER]    = 3,
                    [IEEE80211_MODE_11NA]       = 3,
                    [IEEE80211_MODE_11NG]       = 3,
                };
                chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE];
                bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE];

                chanp->wmep_logcwmin = bssp->wmep_logcwmin = logCwMin[mode];
                IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME,
                    "update %s (chan+bss) logcwmin %u\n",
                    ieee80211_wme_acnames[WME_AC_BE], chanp->wmep_logcwmin);
        }

        /*
         * Arrange for the beacon update.
         *
         * XXX what about MBSS, WDS?
         */
        if (vap->iv_opmode == IEEE80211_M_HOSTAP
            || vap->iv_opmode == IEEE80211_M_IBSS) {
                /*
                 * Arrange for a beacon update and bump the parameter
                 * set number so associated stations load the new values.
                 */
                wme->wme_bssChanParams.cap_info =
                        (wme->wme_bssChanParams.cap_info+1) & WME_QOSINFO_COUNT;
                ieee80211_beacon_notify(vap, IEEE80211_BEACON_WME);
        }

        /* schedule the deferred WME update */
        ieee80211_runtask(ic, &ic->ic_wme_task);

        IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME,
            "%s: WME params updated, cap_info 0x%x\n", __func__,
            vap->iv_opmode == IEEE80211_M_STA ?
                wme->wme_wmeChanParams.cap_info :
                wme->wme_bssChanParams.cap_info);
}

void
ieee80211_wme_updateparams(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;

        if (ic->ic_caps & IEEE80211_C_WME) {
                IEEE80211_LOCK(ic);
                ieee80211_wme_updateparams_locked(vap);
                IEEE80211_UNLOCK(ic);
        }
}

static void
parent_updown(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        ic->ic_parent(ic);
}

static void
update_mcast(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        ic->ic_update_mcast(ic);
}

static void
update_promisc(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        ic->ic_update_promisc(ic);
}

static void
update_channel(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        ic->ic_set_channel(ic);
        ieee80211_radiotap_chan_change(ic);
}

static void
update_chw(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        /*
         * XXX should we defer the channel width _config_ update until now?
         */
        ic->ic_update_chw(ic);
}

static void
update_wme(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        /*
         * XXX should we defer the WME configuration update until now?
         */
        ic->ic_wme.wme_update(ic);
}

static void
restart_vaps(void *arg, int npending)
{
        struct ieee80211com *ic = arg;

        ieee80211_suspend_all(ic);
        ieee80211_resume_all(ic);
}

/*
 * Block until the parent is in a known state.  This is
 * used after any operations that dispatch a task (e.g.
 * to auto-configure the parent device up/down).
 */
void
ieee80211_waitfor_parent(struct ieee80211com *ic)
{
        taskqueue_block(ic->ic_tq);
        ieee80211_draintask(ic, &ic->ic_parent_task);
        ieee80211_draintask(ic, &ic->ic_mcast_task);
        ieee80211_draintask(ic, &ic->ic_promisc_task);
        ieee80211_draintask(ic, &ic->ic_chan_task);
        ieee80211_draintask(ic, &ic->ic_bmiss_task);
        ieee80211_draintask(ic, &ic->ic_chw_task);
        ieee80211_draintask(ic, &ic->ic_wme_task);
        taskqueue_unblock(ic->ic_tq);
}

/*
 * Check to see whether the current channel needs reset.
 *
 * Some devices don't handle being given an invalid channel
 * in their operating mode very well (eg wpi(4) will throw a
 * firmware exception.)
 *
 * Return 0 if we're ok, 1 if the channel needs to be reset.
 *
 * See PR kern/202502.
 */
static int
ieee80211_start_check_reset_chan(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;

        if ((vap->iv_opmode == IEEE80211_M_IBSS &&
             IEEE80211_IS_CHAN_NOADHOC(ic->ic_curchan)) ||
            (vap->iv_opmode == IEEE80211_M_HOSTAP &&
             IEEE80211_IS_CHAN_NOHOSTAP(ic->ic_curchan)))
                return (1);
        return (0);
}

/*
 * Reset the curchan to a known good state.
 */
static void
ieee80211_start_reset_chan(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;

        ic->ic_curchan = &ic->ic_channels[0];
}

/*
 * Start a vap running.  If this is the first vap to be
 * set running on the underlying device then we
 * automatically bring the device up.
 */
void
ieee80211_start_locked(struct ieee80211vap *vap)
{
        struct ifnet *ifp = vap->iv_ifp;
        struct ieee80211com *ic = vap->iv_ic;

        IEEE80211_LOCK_ASSERT(ic);

        IEEE80211_DPRINTF(vap,
                IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
                "start running, %d vaps running\n", ic->ic_nrunning);

        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
                /*
                 * Mark us running.  Note that it's ok to do this first;
                 * if we need to bring the parent device up we defer that
                 * to avoid dropping the com lock.  We expect the device
                 * to respond to being marked up by calling back into us
                 * through ieee80211_start_all at which point we'll come
                 * back in here and complete the work.
                 */
                ifp->if_drv_flags |= IFF_DRV_RUNNING;
                /*
                 * We are not running; if this we are the first vap
                 * to be brought up auto-up the parent if necessary.
                 */
                if (ic->ic_nrunning++ == 0) {

                        /* reset the channel to a known good channel */
                        if (ieee80211_start_check_reset_chan(vap))
                                ieee80211_start_reset_chan(vap);

                        IEEE80211_DPRINTF(vap,
                            IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
                            "%s: up parent %s\n", __func__, ic->ic_name);
                        ieee80211_runtask(ic, &ic->ic_parent_task);
                        return;
                }
        }
        /*
         * If the parent is up and running, then kick the
         * 802.11 state machine as appropriate.
         */
        if (vap->iv_roaming != IEEE80211_ROAMING_MANUAL) {
                if (vap->iv_opmode == IEEE80211_M_STA) {
#if 0
                        /* XXX bypasses scan too easily; disable for now */
                        /*
                         * Try to be intelligent about clocking the state
                         * machine.  If we're currently in RUN state then
                         * we should be able to apply any new state/parameters
                         * simply by re-associating.  Otherwise we need to
                         * re-scan to select an appropriate ap.
                         */ 
                        if (vap->iv_state >= IEEE80211_S_RUN)
                                ieee80211_new_state_locked(vap,
                                    IEEE80211_S_ASSOC, 1);
                        else
#endif
                                ieee80211_new_state_locked(vap,
                                    IEEE80211_S_SCAN, 0);
                } else {
                        /*
                         * For monitor+wds mode there's nothing to do but
                         * start running.  Otherwise if this is the first
                         * vap to be brought up, start a scan which may be
                         * preempted if the station is locked to a particular
                         * channel.
                         */
                        vap->iv_flags_ext |= IEEE80211_FEXT_REINIT;
                        if (vap->iv_opmode == IEEE80211_M_MONITOR ||
                            vap->iv_opmode == IEEE80211_M_WDS)
                                ieee80211_new_state_locked(vap,
                                    IEEE80211_S_RUN, -1);
                        else
                                ieee80211_new_state_locked(vap,
                                    IEEE80211_S_SCAN, 0);
                }
        }
}

/*
 * Start a single vap.
 */
void
ieee80211_init(void *arg)
{
        struct ieee80211vap *vap = arg;

        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
            "%s\n", __func__);

        IEEE80211_LOCK(vap->iv_ic);
        ieee80211_start_locked(vap);
        IEEE80211_UNLOCK(vap->iv_ic);
}

/*
 * Start all runnable vap's on a device.
 */
void
ieee80211_start_all(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                struct ifnet *ifp = vap->iv_ifp;
                if (IFNET_IS_UP_RUNNING(ifp))   /* NB: avoid recursion */
                        ieee80211_start_locked(vap);
        }
        IEEE80211_UNLOCK(ic);
}

/*
 * Stop a vap.  We force it down using the state machine
 * then mark it's ifnet not running.  If this is the last
 * vap running on the underlying device then we close it
 * too to insure it will be properly initialized when the
 * next vap is brought up.
 */
void
ieee80211_stop_locked(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;
        struct ifnet *ifp = vap->iv_ifp;

        IEEE80211_LOCK_ASSERT(ic);

        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
            "stop running, %d vaps running\n", ic->ic_nrunning);

        ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1);
        if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
                ifp->if_drv_flags &= ~IFF_DRV_RUNNING;  /* mark us stopped */
                if (--ic->ic_nrunning == 0) {
                        IEEE80211_DPRINTF(vap,
                            IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG,
                            "down parent %s\n", ic->ic_name);
                        ieee80211_runtask(ic, &ic->ic_parent_task);
                }
        }
}

void
ieee80211_stop(struct ieee80211vap *vap)
{
        struct ieee80211com *ic = vap->iv_ic;

        IEEE80211_LOCK(ic);
        ieee80211_stop_locked(vap);
        IEEE80211_UNLOCK(ic);
}

/*
 * Stop all vap's running on a device.
 */
void
ieee80211_stop_all(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                struct ifnet *ifp = vap->iv_ifp;
                if (IFNET_IS_UP_RUNNING(ifp))   /* NB: avoid recursion */
                        ieee80211_stop_locked(vap);
        }
        IEEE80211_UNLOCK(ic);

        ieee80211_waitfor_parent(ic);
}

/*
 * Stop all vap's running on a device and arrange
 * for those that were running to be resumed.
 */
void
ieee80211_suspend_all(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                struct ifnet *ifp = vap->iv_ifp;
                if (IFNET_IS_UP_RUNNING(ifp)) { /* NB: avoid recursion */
                        vap->iv_flags_ext |= IEEE80211_FEXT_RESUME;
                        ieee80211_stop_locked(vap);
                }
        }
        IEEE80211_UNLOCK(ic);

        ieee80211_waitfor_parent(ic);
}

/*
 * Start all vap's marked for resume.
 */
void
ieee80211_resume_all(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                struct ifnet *ifp = vap->iv_ifp;
                if (!IFNET_IS_UP_RUNNING(ifp) &&
                    (vap->iv_flags_ext & IEEE80211_FEXT_RESUME)) {
                        vap->iv_flags_ext &= ~IEEE80211_FEXT_RESUME;
                        ieee80211_start_locked(vap);
                }
        }
        IEEE80211_UNLOCK(ic);
}

/*
 * Restart all vap's running on a device.
 */
void
ieee80211_restart_all(struct ieee80211com *ic)
{
        /*
         * NB: do not use ieee80211_runtask here, we will
         * block & drain net80211 taskqueue.
         */
#if defined(__DragonFly__)
        taskqueue_enqueue(taskqueue_thread[0], &ic->ic_restart_task);
#else
        taskqueue_enqueue(taskqueue_thread, &ic->ic_restart_task);
#endif
}

void
ieee80211_beacon_miss(struct ieee80211com *ic)
{
        IEEE80211_LOCK(ic);
        if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
                /* Process in a taskq, the handler may reenter the driver */
                ieee80211_runtask(ic, &ic->ic_bmiss_task);
        }
        IEEE80211_UNLOCK(ic);
}

static void
beacon_miss(void *arg, int npending)
{
        struct ieee80211com *ic = arg;
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                /*
                 * We only pass events through for sta vap's in RUN+ state;
                 * may be too restrictive but for now this saves all the
                 * handlers duplicating these checks.
                 */
                if (vap->iv_opmode == IEEE80211_M_STA &&
                    vap->iv_state >= IEEE80211_S_RUN &&
                    vap->iv_bmiss != NULL)
                        vap->iv_bmiss(vap);
        }
        IEEE80211_UNLOCK(ic);
}

static void
beacon_swmiss(void *arg, int npending)
{
        struct ieee80211vap *vap = arg;
        struct ieee80211com *ic = vap->iv_ic;

        IEEE80211_LOCK(ic);
        if (vap->iv_state >= IEEE80211_S_RUN) {
                /* XXX Call multiple times if npending > zero? */
                vap->iv_bmiss(vap);
        }
        IEEE80211_UNLOCK(ic);
}

/*
 * Software beacon miss handling.  Check if any beacons
 * were received in the last period.  If not post a
 * beacon miss; otherwise reset the counter.
 */
void
ieee80211_swbmiss(void *arg)
{
        struct ieee80211vap *vap = arg;
        struct ieee80211com *ic = vap->iv_ic;

        IEEE80211_LOCK_ASSERT(ic);

        KASSERT(vap->iv_state >= IEEE80211_S_RUN,
            ("wrong state %d", vap->iv_state));

        if (ic->ic_flags & IEEE80211_F_SCAN) {
                /*
                 * If scanning just ignore and reset state.  If we get a
                 * bmiss after coming out of scan because we haven't had
                 * time to receive a beacon then we should probe the AP
                 * before posting a real bmiss (unless iv_bmiss_max has
                 * been artifiically lowered).  A cleaner solution might
                 * be to disable the timer on scan start/end but to handle
                 * case of multiple sta vap's we'd need to disable the
                 * timers of all affected vap's.
                 */
                vap->iv_swbmiss_count = 0;
        } else if (vap->iv_swbmiss_count == 0) {
                if (vap->iv_bmiss != NULL)
                        ieee80211_runtask(ic, &vap->iv_swbmiss_task);
        } else
                vap->iv_swbmiss_count = 0;
        callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period,
                ieee80211_swbmiss, vap);
}

/*
 * Start an 802.11h channel switch.  We record the parameters,
 * mark the operation pending, notify each vap through the
 * beacon update mechanism so it can update the beacon frame
 * contents, and then switch vap's to CSA state to block outbound
 * traffic.  Devices that handle CSA directly can use the state
 * switch to do the right thing so long as they call
 * ieee80211_csa_completeswitch when it's time to complete the
 * channel change.  Devices that depend on the net80211 layer can
 * use ieee80211_beacon_update to handle the countdown and the
 * channel switch.
 */
void
ieee80211_csa_startswitch(struct ieee80211com *ic,
        struct ieee80211_channel *c, int mode, int count)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK_ASSERT(ic);

        ic->ic_csa_newchan = c;
        ic->ic_csa_mode = mode;
        ic->ic_csa_count = count;
        ic->ic_flags |= IEEE80211_F_CSAPENDING;
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
                    vap->iv_opmode == IEEE80211_M_IBSS ||
                    vap->iv_opmode == IEEE80211_M_MBSS)
                        ieee80211_beacon_notify(vap, IEEE80211_BEACON_CSA);
                /* switch to CSA state to block outbound traffic */
                if (vap->iv_state == IEEE80211_S_RUN)
                        ieee80211_new_state_locked(vap, IEEE80211_S_CSA, 0);
        }
        ieee80211_notify_csa(ic, c, mode, count);
}

/*
 * Complete the channel switch by transitioning all CSA VAPs to RUN.
 * This is called by both the completion and cancellation functions
 * so each VAP is placed back in the RUN state and can thus transmit.
 */
static void
csa_completeswitch(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        ic->ic_csa_newchan = NULL;
        ic->ic_flags &= ~IEEE80211_F_CSAPENDING;

        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
                if (vap->iv_state == IEEE80211_S_CSA)
                        ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0);
}

/*
 * Complete an 802.11h channel switch started by ieee80211_csa_startswitch.
 * We clear state and move all vap's in CSA state to RUN state
 * so they can again transmit.
 *
 * Although this may not be completely correct, update the BSS channel
 * for each VAP to the newly configured channel. The setcurchan sets
 * the current operating channel for the interface (so the radio does
 * switch over) but the VAP BSS isn't updated, leading to incorrectly
 * reported information via ioctl.
 */
void
ieee80211_csa_completeswitch(struct ieee80211com *ic)
{
        struct ieee80211vap *vap;

        IEEE80211_LOCK_ASSERT(ic);

        KASSERT(ic->ic_flags & IEEE80211_F_CSAPENDING, ("csa not pending"));

        ieee80211_setcurchan(ic, ic->ic_csa_newchan);
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
                if (vap->iv_state == IEEE80211_S_CSA)
                        vap->iv_bss->ni_chan = ic->ic_curchan;

        csa_completeswitch(ic);
}

/*
 * Cancel an 802.11h channel switch started by ieee80211_csa_startswitch.
 * We clear state and move all vap's in CSA state to RUN state
 * so they can again transmit.
 */
void
ieee80211_csa_cancelswitch(struct ieee80211com *ic)
{
        IEEE80211_LOCK_ASSERT(ic);

        csa_completeswitch(ic);
}

/*
 * Complete a DFS CAC started by ieee80211_dfs_cac_start.
 * We clear state and move all vap's in CAC state to RUN state.
 */
void
ieee80211_cac_completeswitch(struct ieee80211vap *vap0)
{
        struct ieee80211com *ic = vap0->iv_ic;
        struct ieee80211vap *vap;

        IEEE80211_LOCK(ic);
        /*
         * Complete CAC state change for lead vap first; then
         * clock all the other vap's waiting.
         */
        KASSERT(vap0->iv_state == IEEE80211_S_CAC,
            ("wrong state %d", vap0->iv_state));
        ieee80211_new_state_locked(vap0, IEEE80211_S_RUN, 0);

        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
                if (vap->iv_state == IEEE80211_S_CAC)
                        ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0);
        IEEE80211_UNLOCK(ic);
}

/*
 * Force all vap's other than the specified vap to the INIT state
 * and mark them as waiting for a scan to complete.  These vaps
 * will be brought up when the scan completes and the scanning vap
 * reaches RUN state by wakeupwaiting.
 */
static void
markwaiting(struct ieee80211vap *vap0)
{
        struct ieee80211com *ic = vap0->iv_ic;
        struct ieee80211vap *vap;

        IEEE80211_LOCK_ASSERT(ic);

        /*
         * A vap list entry can not disappear since we are running on the
         * taskqueue and a vap destroy will queue and drain another state
         * change task.
         */
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                if (vap == vap0)
                        continue;
                if (vap->iv_state != IEEE80211_S_INIT) {
                        /* NB: iv_newstate may drop the lock */
                        vap->iv_newstate(vap, IEEE80211_S_INIT, 0);
                        IEEE80211_LOCK_ASSERT(ic);
                        vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT;
                }
        }
}

/*
 * Wakeup all vap's waiting for a scan to complete.  This is the
 * companion to markwaiting (above) and is used to coordinate
 * multiple vaps scanning.
 * This is called from the state taskqueue.
 */
static void
wakeupwaiting(struct ieee80211vap *vap0)
{
        struct ieee80211com *ic = vap0->iv_ic;
        struct ieee80211vap *vap;

        IEEE80211_LOCK_ASSERT(ic);

        /*
         * A vap list entry can not disappear since we are running on the
         * taskqueue and a vap destroy will queue and drain another state
         * change task.
         */
        TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
                if (vap == vap0)
                        continue;
                if (vap->iv_flags_ext & IEEE80211_FEXT_SCANWAIT) {
                        vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT;
                        /* NB: sta's cannot go INIT->RUN */
                        /* NB: iv_newstate may drop the lock */
                        vap->iv_newstate(vap,
                            vap->iv_opmode == IEEE80211_M_STA ?
                                IEEE80211_S_SCAN : IEEE80211_S_RUN, 0);
                        IEEE80211_LOCK_ASSERT(ic);
                }
        }
}

/*
 * Handle post state change work common to all operating modes.
 */
static void
ieee80211_newstate_cb(void *xvap, int npending)
{
        struct ieee80211vap *vap = xvap;
        struct ieee80211com *ic = vap->iv_ic;
        enum ieee80211_state nstate, ostate;
        int arg, rc;

        IEEE80211_LOCK(ic);
        nstate = vap->iv_nstate;
        arg = vap->iv_nstate_arg;

        if (vap->iv_flags_ext & IEEE80211_FEXT_REINIT) {
                /*
                 * We have been requested to drop back to the INIT before
                 * proceeding to the new state.
                 */
                /* Deny any state changes while we are here. */
                vap->iv_nstate = IEEE80211_S_INIT;
                IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                    "%s: %s -> %s arg %d\n", __func__,
                    ieee80211_state_name[vap->iv_state],
                    ieee80211_state_name[vap->iv_nstate], arg);
                vap->iv_newstate(vap, vap->iv_nstate, 0);
                IEEE80211_LOCK_ASSERT(ic);
                vap->iv_flags_ext &= ~(IEEE80211_FEXT_REINIT |
                    IEEE80211_FEXT_STATEWAIT);
                /* enqueue new state transition after cancel_scan() task */
                ieee80211_new_state_locked(vap, nstate, arg);
                goto done;
        }

        ostate = vap->iv_state;
        if (nstate == IEEE80211_S_SCAN && ostate != IEEE80211_S_INIT) {
                /*
                 * SCAN was forced; e.g. on beacon miss.  Force other running
                 * vap's to INIT state and mark them as waiting for the scan to
                 * complete.  This insures they don't interfere with our
                 * scanning.  Since we are single threaded the vaps can not
                 * transition again while we are executing.
                 *
                 * XXX not always right, assumes ap follows sta
                 */
                markwaiting(vap);
        }
        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
            "%s: %s -> %s arg %d\n", __func__,
            ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg);

        rc = vap->iv_newstate(vap, nstate, arg);
        IEEE80211_LOCK_ASSERT(ic);
        vap->iv_flags_ext &= ~IEEE80211_FEXT_STATEWAIT;
        if (rc != 0) {
                /* State transition failed */
                KASSERT(rc != EINPROGRESS, ("iv_newstate was deferred"));
                KASSERT(nstate != IEEE80211_S_INIT,
                    ("INIT state change failed"));
                IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                    "%s: %s returned error %d\n", __func__,
                    ieee80211_state_name[nstate], rc);
                goto done;
        }

        /* No actual transition, skip post processing */
        if (ostate == nstate)
                goto done;

        if (nstate == IEEE80211_S_RUN) {
                /*
                 * OACTIVE may be set on the vap if the upper layer
                 * tried to transmit (e.g. IPv6 NDP) before we reach
                 * RUN state.  Clear it and restart xmit.
                 *
                 * Note this can also happen as a result of SLEEP->RUN
                 * (i.e. coming out of power save mode).
                 */
#if defined(__DragonFly__)
                struct ifaltq_subque *ifsq;
                int wst;

                ifsq = ifq_get_subq_default(&vap->iv_ifp->if_snd);
                ifsq_clr_oactive(ifsq);
                wst = wlan_serialize_push();
                vap->iv_ifp->if_start(vap->iv_ifp, ifsq);
                wlan_serialize_pop(wst);
#else
                vap->iv_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
#endif

                /*
                 * XXX TODO Kick-start a VAP queue - this should be a method!
                 */

                /* bring up any vaps waiting on us */
                wakeupwaiting(vap);
        } else if (nstate == IEEE80211_S_INIT) {
                /*
                 * Flush the scan cache if we did the last scan (XXX?)
                 * and flush any frames on send queues from this vap.
                 * Note the mgt q is used only for legacy drivers and
                 * will go away shortly.
                 */
                ieee80211_scan_flush(vap);

                /*
                 * XXX TODO: ic/vap queue flush
                 */
        }
done:
        IEEE80211_UNLOCK(ic);
}

/*
 * Public interface for initiating a state machine change.
 * This routine single-threads the request and coordinates
 * the scheduling of multiple vaps for the purpose of selecting
 * an operating channel.  Specifically the following scenarios
 * are handled:
 * o only one vap can be selecting a channel so on transition to
 *   SCAN state if another vap is already scanning then
 *   mark the caller for later processing and return without
 *   doing anything (XXX? expectations by caller of synchronous operation)
 * o only one vap can be doing CAC of a channel so on transition to
 *   CAC state if another vap is already scanning for radar then
 *   mark the caller for later processing and return without
 *   doing anything (XXX? expectations by caller of synchronous operation)
 * o if another vap is already running when a request is made
 *   to SCAN then an operating channel has been chosen; bypass
 *   the scan and just join the channel
 *
 * Note that the state change call is done through the iv_newstate
 * method pointer so any driver routine gets invoked.  The driver
 * will normally call back into operating mode-specific
 * ieee80211_newstate routines (below) unless it needs to completely
 * bypass the state machine (e.g. because the firmware has it's
 * own idea how things should work).  Bypassing the net80211 layer
 * is usually a mistake and indicates lack of proper integration
 * with the net80211 layer.
 */
int
ieee80211_new_state_locked(struct ieee80211vap *vap,
        enum ieee80211_state nstate, int arg)
{
        struct ieee80211com *ic = vap->iv_ic;
        struct ieee80211vap *vp;
        enum ieee80211_state ostate;
        int nrunning, nscanning;

        IEEE80211_LOCK_ASSERT(ic);

        if (vap->iv_flags_ext & IEEE80211_FEXT_STATEWAIT) {
                if (vap->iv_nstate == IEEE80211_S_INIT ||
                    ((vap->iv_state == IEEE80211_S_INIT ||
                    (vap->iv_flags_ext & IEEE80211_FEXT_REINIT)) &&
                    vap->iv_nstate == IEEE80211_S_SCAN &&
                    nstate > IEEE80211_S_SCAN)) {
                        /*
                         * XXX The vap is being stopped/started,
                         * do not allow any other state changes
                         * until this is completed.
                         */
                        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                            "%s: %s -> %s (%s) transition discarded\n",
                            __func__,
                            ieee80211_state_name[vap->iv_state],
                            ieee80211_state_name[nstate],
                            ieee80211_state_name[vap->iv_nstate]);
                        return -1;
                } else if (vap->iv_state != vap->iv_nstate) {
#if 0
                        /* Warn if the previous state hasn't completed. */
                        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                            "%s: pending %s -> %s transition lost\n", __func__,
                            ieee80211_state_name[vap->iv_state],
                            ieee80211_state_name[vap->iv_nstate]);
#else
                        /* XXX temporarily enable to identify issues */
                        if_printf(vap->iv_ifp,
                            "%s: pending %s -> %s transition lost\n",
                            __func__, ieee80211_state_name[vap->iv_state],
                            ieee80211_state_name[vap->iv_nstate]);
#endif
                }
        }

        nrunning = nscanning = 0;
        /* XXX can track this state instead of calculating */
        TAILQ_FOREACH(vp, &ic->ic_vaps, iv_next) {
                if (vp != vap) {
                        if (vp->iv_state >= IEEE80211_S_RUN)
                                nrunning++;
                        /* XXX doesn't handle bg scan */
                        /* NB: CAC+AUTH+ASSOC treated like SCAN */
                        else if (vp->iv_state > IEEE80211_S_INIT)
                                nscanning++;
                }
        }
        ostate = vap->iv_state;
        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
            "%s: %s -> %s (nrunning %d nscanning %d)\n", __func__,
            ieee80211_state_name[ostate], ieee80211_state_name[nstate],
            nrunning, nscanning);
        switch (nstate) {
        case IEEE80211_S_SCAN:
                if (ostate == IEEE80211_S_INIT) {
                        /*
                         * INIT -> SCAN happens on initial bringup.
                         */
                        KASSERT(!(nscanning && nrunning),
                            ("%d scanning and %d running", nscanning, nrunning));
                        if (nscanning) {
                                /*
                                 * Someone is scanning, defer our state
                                 * change until the work has completed.
                                 */
                                IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                                    "%s: defer %s -> %s\n",
                                    __func__, ieee80211_state_name[ostate],
                                    ieee80211_state_name[nstate]);
                                vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT;
                                return 0;
                        }
                        if (nrunning) {
                                /*
                                 * Someone is operating; just join the channel
                                 * they have chosen.
                                 */
                                /* XXX kill arg? */
                                /* XXX check each opmode, adhoc? */
                                if (vap->iv_opmode == IEEE80211_M_STA)
                                        nstate = IEEE80211_S_SCAN;
                                else
                                        nstate = IEEE80211_S_RUN;
#ifdef IEEE80211_DEBUG
                                if (nstate != IEEE80211_S_SCAN) {
                                        IEEE80211_DPRINTF(vap,
                                            IEEE80211_MSG_STATE,
                                            "%s: override, now %s -> %s\n",
                                            __func__,
                                            ieee80211_state_name[ostate],
                                            ieee80211_state_name[nstate]);
                                }
#endif
                        }
                }
                break;
        case IEEE80211_S_RUN:
                if (vap->iv_opmode == IEEE80211_M_WDS &&
                    (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) &&
                    nscanning) {
                        /*
                         * Legacy WDS with someone else scanning; don't
                         * go online until that completes as we should
                         * follow the other vap to the channel they choose.
                         */
                        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                             "%s: defer %s -> %s (legacy WDS)\n", __func__,
                             ieee80211_state_name[ostate],
                             ieee80211_state_name[nstate]);
                        vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT;
                        return 0;
                }
                if (vap->iv_opmode == IEEE80211_M_HOSTAP &&
                    IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) &&
                    (vap->iv_flags_ext & IEEE80211_FEXT_DFS) &&
                    !IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) {
                        /*
                         * This is a DFS channel, transition to CAC state
                         * instead of RUN.  This allows us to initiate
                         * Channel Availability Check (CAC) as specified
                         * by 11h/DFS.
                         */
                        nstate = IEEE80211_S_CAC;
                        IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
                             "%s: override %s -> %s (DFS)\n", __func__,
                             ieee80211_state_name[ostate],
                             ieee80211_state_name[nstate]);
                }
                break;
        case IEEE80211_S_INIT:
                /* cancel any scan in progress */
                ieee80211_cancel_scan(vap);
                if (ostate == IEEE80211_S_INIT ) {
                        /* XXX don't believe this */
                        /* INIT -> INIT. nothing to do */
                        vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT;
                }
                /* fall thru... */
        default:
                break;
        }
        /* defer the state change to a thread */
        vap->iv_nstate = nstate;
        vap->iv_nstate_arg = arg;
        vap->iv_flags_ext |= IEEE80211_FEXT_STATEWAIT;
        ieee80211_runtask(ic, &vap->iv_nstate_task);
        return EINPROGRESS;
}

int
ieee80211_new_state(struct ieee80211vap *vap,
        enum ieee80211_state nstate, int arg)
{
        struct ieee80211com *ic = vap->iv_ic;
        int rc;

        IEEE80211_LOCK(ic);
        rc = ieee80211_new_state_locked(vap, nstate, arg);
        IEEE80211_UNLOCK(ic);
        return rc;
}