1 Monthday, Month DD, YYYY
2 Summary for 1.10.1 libpcap release (so far!)
4 Fix "type XXX subtype YYY" giving a parse error
6 Add PCAP_AVAILABLE_1_11.
8 Rename struct bpf_aux_data to avoid NetBSD compile errors
9 Squelch some compiler warnings
10 Squelch some Bison warnings
11 Fix cross-builds with older kernels lacking BPF_MOD and BPF_XOR
12 Fix Bison detection for minor version 0.
13 Fix parallel build with FreeBSD make.
14 Get DLT_MATCHING_MAX right in gencode.c on NetBSD.
15 Define timeradd() and timersub() if necessary.
16 Fix Cygwin/MSYS target directories.
17 Fix symlinking with DESTDIR.
18 Fix generation of libpcap.pc with CMake when not building a shared
20 Check for Arm64 as well as x86-64 when looking for packet.lib on
23 Refine Markdown in README.md.
24 Improve the description of portrange in filters.
25 README.linux.md isn't Markdown, rename it just README.linux.
27 Support reading version 1.2, which some writers produce, and which
28 is the same as 1.0 (some new block types were added, but
29 that's not sufficient reason to bump the minor version number,
30 as code that understands those new block types can handle them
33 Drop support for text-mode USB captures, as we require a 2.6.27
34 or later kernel (credit to Chaoyuan Peng for noting the
35 sscanf vulnerabilities in the text-mode code that got me to
36 realize that we didn't need this code any more)
37 Bluetooth: fix non-blocking mode.
38 Don't assume that all compilers used to build for Linux support
41 Add more information in "interface disappeared" error messages, in
42 the hopes of trying to figure out the cause.
43 Treat ERROR_DEVICE_REMOVED as "device was removed".
44 Indicate in the error message which "device was removed" error
46 Report the Windows error status if PacketSendPacket() fails.
47 Use %lu for ULONGs in error message formats.
48 Don't treat the inability to find airpcap.dll as an error.
49 Ignore spurious error reports by Microsoft Surface mobile
50 telephony modem driver
52 Clean up error checking and error messages for server address
55 Tuesday, December 29, 2020
56 Summary for 1.10.0 libpcap release
57 Add support for capturing on DPDK devices
58 Label most APIs by the first release in which they're available
59 Fix some memory leaks, including in pcap_compile()
60 Add pcap_datalink_val_to_description_or_dlt()
61 Handle the pcap private data in a fashion that makes fewer
62 assumptions about memory layouts (might fix GitHub issue #940
64 Fix some thread safety issues
65 pcap_findalldevs(): don't sort interfaces by unit number
66 Always return a list of supported time-stamp types, even if only
67 host time stamps are supported
68 Increase the maximum snaplen for LINKTYPE_USBPCAP/DLT_USBPCAP
69 Report the DLT description in error messages
70 Add pcap_init() for first-time initialization and global option
71 setting; it's not required, but may be used
72 Remove (unused) SITA support
74 Correctly handle pcapng captures with more than one IDB with a
75 snspshot length greater than the supported maximum
77 Create the file in pcap_dump_open_append() if it doesn't exist
79 Fix "unknown ether proto 'aarp'"
80 Add a new filter "ifindex" for DLT_LINUX_SLL2 files on all
81 platforms and live Linux captures
82 Add a hack to the optimizer to try to catch certain optimizer
83 loops (should prevent GitHub issue #112)
84 Show special Linux BPF offsets symbolically in bpf_image() and
86 Added support for ICMPv6 types 1-4 as tokens with names
87 Remove undocumented and rather old "ether proto" protocols
88 Catch invalid IPv4 addresses in filters
89 Don't assume ARM supports unaligned accesses
90 Security and other issues found by analysis:
91 Fix various security issues reported by Charles Smith at Tangible
93 Fix various security issues reported by Include Security
94 Fix some issues found by cppcheck.
95 Add some overflow checks in the optimizer
97 Support rpcap-over-TLS
98 Redo protocol version negotiation to avoid problems with old
99 servers (it still works with servers using the old negotiation,
100 as well as servers not supporting negotiation)
101 Error handling cleanups
102 Add some new authentication libpcap error codes for specific
104 Fix some inetd issues in rpcapd
105 Fix rpcapd core dumps with invalid configuration file
106 On UN*X, don't have rpcapd tell the client why authentication
107 failed, so a brute-force attacker can't distinguish between
108 "unknown user name" and "known user name, wrong password"
109 Allow rpcapd to rebind more rapidly (GitHub issue #765)
111 Improve man pages, including adding backward compatibility notes
112 Building and testing:
113 Require, and assume, some level of C99 support in the C compiler
114 Require Visual Studio 2015 or later if using Visual Studio
115 Fix configure script issues, including with libnl on Linux
117 Squelch complaints from Bison about "%define api.pure" being
119 Fix compilation of pcap-tc.c
121 Require PF_PACKET support, and kernel 2.6.27 or later
122 Handle systems without AF_INET or AF_UNIX socket support
123 Get rid of Wireless Extensions for turning monitor mode on
124 Proper memory sync for PACKET_MMAP (may prevent GitHub issue
126 Drop support for libnl 1 and 2.
127 Return error on interface going away, but not if it just went
128 down but is still present
129 Set socket protocol only after packet ring configured,
130 reducing bogus packet drop reports
131 Get ifdrop stats from sysfs.
132 When adjusting BPF programs, do not subtract the
133 SLL[2]_HDR_LEN if the location is negative (special metadata
134 offset), to preserve references to metadata; see
135 https://github.com/the-tcpdump-group/tcpdump/issues/480#issuecomment-486827278
136 Report a warning for unknown ARPHRD types
137 Have pcap_breakloop() forcibly break out of a sleeping
139 Add support for DSA data link types
140 For raw USB bus capture, use the snapshot length to set the
141 buffer size, and set the len field to reflect the length
142 in the URB (GitHub issue #808)
143 With a timeout of zero, wait indefinitely
144 Clean up support for some non-GNU libc C libraries
145 Add DLT_LINUX_SLL2 for cooked-mode captures
146 Probe CONFIGURATION descriptor of connected USB devices
147 Treat EPERM on ethtool ioctls as meaning "not supported", as
148 permissions checks are done before checking whether the
149 ioctl is supported at all
151 Cope with getting EPWROFF from SIOCGIFMEDIA
152 Treat EPERM on SIOCGIFMEDIA as meaning "not supported", as
153 permissions checks are done before checking whether the
154 ioctl is supported at all
155 Treat ENXIO when reading packets as meaning "the interface
157 Report "the interface disappeared", not "the interface went
158 down", if the interface was removed during a capture
160 Treat ENXIO as meaning "the interface was removed"
161 Report "the interface disappeared", not "the interface went
162 down", if the interface was removed during a capture
164 Treat ENXIO as meaning "the interface was removed"
165 Report "the interface disappeared", not "the interface went
166 down", if the interface was removed during a capture
168 Treat EIO as meaning "the interface was removed"
169 Report "the interface disappeared", not "the interface went
170 down", if the interface was removed during a capture
172 Treat ENXIO as meaning "the interface was removed"
173 Report "the interface disappeared", not "the interface went
174 down", if the interface was removed during a capture
176 Treat ENXIO as meaning "the interface was removed"
177 Report "the interface disappeared", not "the interface went
178 down", if the interface was removed during a capture
180 Fix loading of BPF kernel extension
181 Treat ENXIO as meaning "the interface was removed"
182 Report "the interface disappeared", not "the interface went
183 down", if the interface was removed during a capture
185 Make the snapshot length work even if pcap_setfilter()
187 Fix compilation on Cygwin/MSYS
188 Add pcap_handle(), and deprecate pcap_fileno()
189 Report PCAP_ERROR_NO_SUCH_DEVICE for a non-existent device
190 Return an appropriate error message for device removed or
191 device unusable due to a suspend/resume
192 Report a warning for unknown NdisMedium types
193 Have pcap_breakloop() forcibly break out of a sleeping
195 Clean up building DLL
196 Handle CRT mismatch for pcap_dump_fopen()
197 Map NdisMediumWirelessWan to DLT_RAW
198 Add AirPcap support in a module, rather than using
199 WinPcap/Npcap's support for it
200 Report the system error for PacketSetHwFilter() failures
201 Add support for getting and setting packet time stamp types
203 Have pcap_init() allow selecting whether the API should use
204 local code page strings or UTF-8 strings (including error
209 Sunday, July 22, 2018
210 Summary for 1.9.1 libpcap release
211 Mention pcap_get_required_select_timeout() in the main pcap man page
212 Fix pcap-usb-linux.c build on systems with musl
213 Fix assorted man page and other documentation issues
214 Plug assorted memory leaks
215 Documentation changes to use https:
216 Changes to how time stamp calculations are done
217 Lots of tweaks to make newer compilers happier and warning-free and
218 to fix instances of C undefined behavior
219 Warn if AC_PROG_CC_C99 can't enable C99 support
220 Rename pcap_set_protocol() to pcap_set_protocol_linux().
221 Align pcap_t private data on an 8-byte boundary.
222 Fix various error messages
223 Use 64-bit clean API in dag_findalldevs()
224 Fix cleaning up after some errors
225 Work around some ethtool ioctl bugs in newer Linux kernels (GitHub
227 Add backwards compatibility sections to some man pages (GitHub issue
229 Fix autotool configuration on AIX and macOS
230 Don't export bpf_filter_with_aux_data() or struct bpf_aux_data;
231 they're internal-only and subject to change
232 Fix pcapng block size checking
233 On macOS, don't build rpcapd or test programs any fatter than they
235 Fix reading of capture statistics for Linux USB
236 Fix packet size values for Linux USB packets (GitHub issue #808)
237 Check only VID in VLAN test in filterss (GitHub issue #461)
238 Fix pcap_list_datalinks on 802.11 devices on macOS
239 Fix overflows with very large snapshot length in pcap file
240 Improve parsing of rpcapd configuration file (GitHub issue #767)
241 Handle systems without strlcpy() or strlcat() better
242 Fix crashes and other errors with invalid filter expressions
243 Fix use of uninitialized file descriptor in remote capture
244 Fix some CMake issues
245 Fix some divide-by-zero issues with the filter compiler
246 Work around a GNU libc bug in pcap_nametonetaddr()
247 Add support for DLT_LINUX_SLL2
248 Fix handling of the packet-count argument for Myricom SNF devices
249 Fix --disable-rdma in configure script (GitHub issue #782)
250 Fix compilation of TurboCap support (GitHub issue #764)
251 Constify first argument to pcap_findalldevs_ex()
252 Fix a number of issues when running rpcapd as an inetd-style daemon
253 Fix CMake issues with D-Bus libraries
254 In rpcapd, clean up termination of a capture session
255 Redo remote capture protocol negotiation
256 In rpcapd, report the same error for "invalid user name" and
257 "invalid password", to make brute-forcing harder
258 For remote captures, add an error code for "the server requires TLS"
259 Fix pcap_dump_fopen() on Windows to avoid clashes between
260 {Win,N}Pcap and application C runtimes
261 Fix exporting of functions from Windows DLLs (GitHub issue #810)
262 Fix building as part of Npcap
263 Allow rpcapd to rebind more rapidly
264 Fix building shared libpcap library on midipix (midipix.org)
265 Fix hack to detect UTF-16LE adapter names on Windows not to go past
266 the end of the string
267 Fix handling of "wireless WAN" (mobile phone network modems) on
268 Windows with WinPcap/Npcap (GitHub issue #824)
269 Have pcap_dump_open_append() create the dump file if it doesn't
270 exists (GitHub issue #247)
271 Fix the maxmum snapshot length for DLT_USBPCAP
272 Use -fPIC when building for 64-bit SPARC on Linux (GitHub issue #837)
273 Fix CMake 64-bit library installation directory on some Linux
275 Boost the TPACKET_V3 timeout to the maximum if a timeout of 0 was
277 Five CVE-2019-15161, CVE-2019-15162, CVE-2019-15163, CVE-2019-15164, CVE-2019-15165
278 Fixes for CVE-2018-16301, errors in pcapng reading.
279 PCAPNG reader applies some sanity checks before doing malloc().
281 Sunday, June 24, 2018, by mcr@sandelman.ca
282 Summary for 1.9.0 libpcap release
283 Added testing system to libpcap, independent of tcpdump
284 Changes to how pcap_t is activated
285 Adding support for Large stream buffers on Endace DAG cards
286 Changes to BSD 3-clause license to 2-clause licence
287 Additions to TCP header parsing, per RFC3168
288 Add CMake build process (extensive number of changes)
289 Assign a value for OpenBSD DLT_OPENFLOW.
290 Support setting non-blocking mode before activating.
291 Extensive build support for Windows VS2010 and MINGW (many many changes, over many months)
292 Added RPCAPD support when --enable-remote (default no)
293 Add the rpcap daemon source and build instructions.
294 Put back the greasy "save the capture filter string so we can tweak it"
295 hack, that keeps libpcap from capturing rpcap traffic.
296 Fixes for captures on MacOS, utun0
297 fixes so that non-AF_INET addresses, are not ==AF_INET6 addresses.
298 Add a linktype for IBM SDLC frames containing SNA PDUs.
299 pcap_compile() in 1.8.0 and later is newly thread-safe.
300 bound snaplen for linux tpacket_v2 to ~64k
301 Make VLAN filter handle both metadata and inline tags
302 D-Bus captures can now be up to 128MB in size
303 Added LORATAP DLT value
304 Added DLT_VSOCK for https://qemu-project.org/Features/VirtioVsock
305 probe_devices() fixes not to overrun buffer for name of device
306 Add linux-specific pcap_set_protocol_linux() to allow specifying a specific capture protocol.
307 RDMA sniffing support for pcap
308 Add Nordic Semiconductor Bluetooth LE sniffer link-layer header type.
309 fixes for reading /etc/ethers
310 Make it possible to build on Windows without packet.dll.
311 Add tests for large file support on UN*X.
312 Solaris fixes to work with 2.8.6
313 configuration test now looks for header files, not capture devices present
314 Fix to work with Berkeley YACC.
315 fixes for DragonBSD compilation of pcap-netmap.c
316 Clean up the ether_hostton() stuff.
317 Add an option to disable Linux memory-mapped capture support.
318 Add DAG API support checks.
319 Add Septel, Myricom SNF, and Riverbed TurboCap checks.
320 Add checks for Linux USB, Linux Bluetooth, D-Bus, and RDMA sniffing support.
321 Add a check for hardware time stamping on Linux.
322 Don't bother supporting pre-2005 Visual Studio.
323 Increased minimum autoconf version requirement to 2.64
324 Add DLT value 273 for XRA-31 sniffer
325 Clean up handing of signal interrupts in pcap_read_nocb_remote().
326 Use the XPG 4.2 versions of the networking APIs in Solaris.
327 Fix, and better explain, the "IPv6 means IPv6, not IPv4" option setting.
328 Explicitly warn that negative packet buffer timeouts should not be used.
329 rpcapd: Add support inetd-likes, including xinetd.conf, and systemd units
330 Rename DLT_IEEE802_15_4 to DLT_IEEE802_15_4_WITHFCS.
331 Add DISPLAYPORT AUX link type
332 Remove the sunos4 kernel modules and all references to them.
333 Add more interface flags to pcap_findalldevs().
334 Summary for 1.9.0 libpcap release (to 2017-01-25 by guy@alum.mit.edu)
335 Man page improvements
336 Fix Linux cooked mode userspace filtering (GitHub pull request #429)
337 Fix compilation if IPv6 support not enabled
338 Fix some Linux memory-mapped capture buffer size issues
339 Don't fail if kernel filter can't be set on Linux (GitHub issue
341 Improve sorting of interfaces for pcap_findalldevs()
342 Don't list Linux usbmon devices if usbmon module isn't loaded
343 Report PCAP_ERROR_PERM_DENIED if no permission to open Linux usbmon
345 Fix DLT_ type for Solaris IPNET devices
346 Always return an error message for errors finding DAG or Myricom
348 If possible, don't require that a device be openable when
349 enumerating them for pcap_findalldevs()
350 Don't put incompletely-initialized addresses in the address list for
351 When finding Myricom devices, update description for regular
352 interfaces that are Myricom devices and handle SNF_FLAGS=0x2(port
354 Fix compilation error in DAG support
355 Fix issues with CMake configuration
356 Add support for stream buffers larger than 2GB on newer DAG cards
357 Remove support for building against DAG versions without STREAMS
358 support (before dag-3.0.0 2007)
360 Tuesday, Oct. 25, 2016 mcr@sandelman.ca
361 Summary for 1.8.1 libpcap release
362 Add a target in Makefile.in for Exuberant Ctags use: 'extags'.
363 Rename configure.in to configure.ac: autoconf 2.59
364 Clean up the name-to-DLT mapping table.
365 Add some newer DLT_ values: IPMI_HPM_2,ZWAVE_R1_R2,ZWAVE_R3,WATTSTOPPER_DLM,ISO_14443,RDS
366 Clarify what the return values are for both success and failure.
367 Many changes to build on windows
368 Check for the "break the loop" condition in the inner loop for TPACKET_V3.
369 Fix handling of packet count in the TPACKET_V3 inner loop: GitHub issue #493.
370 Filter out duplicate looped back CAN frames.
371 Fix the handling of loopback filters for IPv6 packets.
372 Add a link-layer header type for RDS (IEC 62106) groups.
373 Use different intermediate folders for x86 and x64 builds on Windows.
374 On Linux, handle all CAN captures with pcap-linux.c, in cooked mode.
375 Removes the need for the "host-endian" link-layer header type.
376 Compile with '-Wused-but-marked-unused' in devel mode if supported
377 Have separate DLTs for big-endian and host-endian SocketCAN headers.
378 Reflect version.h being renamed to pcap_version.h.
379 Require that version.h be generated: all build procedures we support generate version.h (autoconf, CMake, MSVC)!
380 Properly check for sock_recv() errors.
381 Re-impose some of Winsock's limitations on sock_recv().
382 Replace sprintf() with pcap_snprintf().
383 Fix signature of pcap_stats_ex_remote().
384 Initial cmake support for remote packet capture.
385 Have rpcap_remoteact_getsock() return a SOCKET and supply an "is active" flag.
386 Clean up {DAG, Septel, Myricom SNF}-only builds.
387 Do UTF-16-to-ASCII conversion into the right place.
388 pcap_create_interface() needs the interface name on Linux.
389 Clean up hardware time stamp support: the "any" device does not support any time stamp types.
390 Add support for capturing on FreeBSD usbusN interfaces.
391 Add a LINKTYPE/DLT_ value for FreeBSD USB.
392 Go back to using PCAP_API on Windows.
394 Add TurboCap support from WinPcap.
395 Recognize 802.1ad nested VLAN tag in vlan filter.
397 Thursday Sep. 3, 2015 guy@alum.mit.edu
398 Summary for 1.7.5 libpcap release
400 Add some allocation failure checks.
401 Fix a number of Linux/ucLinux configure/build issues.
402 Fix some memory leaks.
403 Recognize 802.1ad nested VLAN tag in vlan filter.
404 Fix building Bluetooth Linux Monitor support with BlueZ 5.1+
406 Saturday Jun. 27, 2015 mcr@sandelman.ca
407 Summary for 1.7.4 libpcap release
408 Include fix for GitHub issue #424 -- out of tree builds.
410 Friday Apr. 10, 2015 guy@alum.mit.edu
411 Summary for 1.7.3 libpcap release
412 Work around a Linux bonding driver bug.
414 Thursday Feb. 12, 2015 guy@alum.mit.edu/mcr@sandelman.ca
415 Summary for 1.7.2 libpcap release
416 Support for filtering Geneve encapsulated packets.
417 Generalize encapsulation handling, fixing some bugs.
418 Don't add null addresses to address lists.
419 Add pcap_dump_open_append() to open for appending.
420 Fix the swapping of isochronous descriptors in Linux USB.
421 Attempt to handle TPACKET_V1 with 32-bit userland and 64-bit kernel.
423 Wednesday Nov. 12, 2014 guy@alum.mit.edu/mcr@sandelman.ca
424 Summary for 1.7.0 libpcap release
425 Fix handling of zones for BPF on Solaris
427 clarifications for read timeouts.
428 Use BPF extensions in compiled filters, fixing VLAN filters
429 some fixes to compilation without stdint.h
430 EBUSY can now be returned by SNFv3 code.
431 Fix the range checks in BPF loads
435 Monday Aug. 12, 2014 guy@alum.mit.edu
436 Summary for 1.6.2 libpcap release
437 Don't crash on filters testing a non-existent link-layer type
439 Fix sending in non-blocking mode on Linux with memory-mapped
441 Fix timestamps when reading pcap-ng files on big-endian
444 Saturday Jul. 19, 2014 mcr@sandelman.ca
445 Summary for 1.6.1 libpcap release
446 some fixes for the any device
447 changes for how --enable-XXX (--enable-sniffing, --enable-can) works
449 Wednesday Jul. 2, 2014 mcr@sandelman.ca
450 Summary for 1.6.0 libpcap release
451 Don't support D-Bus sniffing on OS X
452 fixes for byte order issues with NFLOG captures
453 Handle using cooked mode for DLT_NETLINK in activate_new().
454 on platforms where you can not capture on down interfaces, do not list them
455 but: do list interfaces which are down, if you can capture on them!
457 Wednesday December 18, 2013 guy@alum.mit.edu
458 Summary for 1.5.3 libpcap release
459 Don't let packets that don't match the current filter get to the
460 application when TPACKET_V3 is used. (GitHub issue #331)
461 Fix handling of pcap_loop()/pcap_dispatch() with a packet count
462 of 0 on some platforms (including Linux with TPACKET_V3).
464 Work around TPACKET_V3 deficiency that causes packets to be lost
465 when a timeout of 0 is specified. (GitHub issue #335)
466 Man page formatting fixes.
468 Wednesday December 4, 2013 guy@alum.mit.edu
469 Summary for 1.5.2 libpcap release
470 Fix libpcap to work when compiled with TPACKET_V3 support and
471 running on a kernel without TPACKET_V3 support. (GitHub
474 Wednesday November 20, 2013 guy@alum.mit.edu
475 Summary for 1.5.1 libpcap release
476 Report an error, rather than crashing, if an IPv6 address is
477 used for link-layer filtering. (Wireshark bug 9376)
479 Wednesday October 30, 2013 guy@alum.mit.edu
480 Summary for 1.5.0 libpcap release
481 TPACKET_V3 support added for Linux
482 Point users to the the-tcpdump-group repository on GitHub rather
483 than the mcr repository
484 Checks added for malloc()/realloc()/etc. failures
485 Fixed build on Solaris 11
486 Support filtering E1 SS7 traffic on MTP2 layer Annex A
487 Use "ln -s" to link man pages by default
488 Add support for getting nanosecond-resolution time stamps when
489 capturing and reading capture files
490 Many changes to autoconf to deal better with non-GCC compilers
491 added many new DLT types
493 Saturday April 6, 2013 guy@alum.mit.edu
494 Summary for 1.4.0 libpcap release
495 Add netfilter/nfqueue interface.
496 If we don't have support for IPv6 address resolution, support,
497 in filter expressions, what IPv6 stuff we can.
498 Fix pcap-config to include -lpthread if canusb support is
500 Try to fix "pcap_parse not defined" problems when --without-flex
501 and --without-bison are used when you have Flex and Bison
502 Fix some issues with the pcap_loop man page.
503 Fix pcap_getnonblock() and pcap_setnonblock() to fill in the
504 supplied error message buffer
505 Fix typo that, it appeared, would cause pcap-libdlpi.c not to
506 compile (perhaps systems with libdlpi also have BPF and use
508 Catch attempts to call pcap_compile() on a non-activated pcap_t
509 Fix crash on Linux with CAN-USB support without usbfs
510 Fix addition of VLAN tags for Linux cooked captures
511 Check for both EOPNOTSUPP and EINVAL after SIOCETHTOOL ioctl, so
512 that the driver can report either one if it doesn't support
514 Add DLT_INFINIBAND and DLT_SCTP
515 Describe "proto XXX" and "protochain XXX" in the pcap-filter man
517 Handle either directories, or symlinks to directories, that
518 correspond to interfaces in /sys/class/net
519 Fix handling of VLAN tag insertion to check, on Linux 3.x
520 kernels, for VLAN tag valid flag
521 Clean up some man pages
522 Support libnl3 as well as libnl1 and libnl2 on Linux
523 Fix handling of Bluetooth devices on 3.x Linux kernels
525 Friday March 30, 2012. mcr@sandelman.ca
526 Summary for 1.3.0 libpcap release
527 Handle DLT_PFSYNC in {FreeBSD, other *BSD+Mac OS X, other}.
528 Linux: Don't fail if netfilter isn't enabled in the kernel.
529 Add new link-layer type for NFC Forum LLCP.
530 Put the CANUSB stuff into EXTRA_DIST, so it shows up in the release tarball.
531 Add LINKTYPE_NG40/DLT_NG40.
532 Add DLT_MPEG_2_TS/LINKTYPE_MPEG_2_TS for MPEG-2 transport streams.
533 [PATCH] Fix AIX-3.5 crash with read failure during stress
535 Introduce --disable-shared configure option.
536 Added initial support for canusb devices.
537 Include the pcap(3PCAP) additions as 1.2.1 changes.
538 many updates to documentation: pcap.3pcap.in
539 Improve 'inbound'/'outbound' capture filters under Linux.
540 Note the cleanup of handling of new DLT_/LINKTYPE_ values.
541 On Lion, don't build for PPC.
542 For mac80211 devices we need to clean up monitor mode on exit.
544 Friday December 9, 2011. guy@alum.mit.edu.
545 Summary for 1.2.1 libpcap release
547 Fix typos in README.linux file.
548 Clean up some compiler warnings.
549 Fix Linux compile problems and tests for ethtool.h.
550 Treat Debian/kFreeBSD and GNU/Hurd as systems with GNU
552 Support 802.1 QinQ as a form of VLAN in filters.
553 Treat "carp" as equivalent to "vrrp" in filters.
554 Fix code generated for "ip6 protochain".
555 Add some new link-layer header types.
556 Support capturing NetFilter log messages on Linux.
557 Clean up some error messages.
558 Turn off monitor mode on exit for mac80211 interfaces on Linux.
559 Fix problems turning monitor mode on for non-mac80211 interfaces
561 Properly fail if /sys/class/net or /proc/net/dev exist but can't
563 Fail if pcap_activate() is called on an already-activated
564 pcap_t, and add a test program for that.
565 Fix filtering in pcap-ng files.
566 Don't build for PowerPC on Mac OS X Lion.
567 Simplify handling of new DLT_/LINKTYPE_ values.
568 Expand pcap(3PCAP) man page.
570 Sunday July 24, 2011. mcr@sandelman.ca.
571 Summary for 1.2 libpcap release
572 All of the changes listed below for 1.1.1 and 1.1.2.
573 Changes to error handling for pcap_findalldevs().
574 Fix the calculation of the frame size in memory-mapped captures.
575 Add a link-layer header type for STANAG 5066 D_PDUs.
576 Add a link-layer type for a variant of 3GPP TS 27.010.
577 Noted real nature of LINKTYPE_ARCNET.
578 Add a link-layer type for DVB-CI.
579 Fix configure-script discovery of VLAN acceleration support.
580 see https://netoptimizer.blogspot.com/2010/09/tcpdump-vs-vlan-tags.html
581 Linux, HP-UX, AIX, NetBSD and OpenBSD compilation/conflict fixes.
582 Protect against including AIX 5.x's <net/bpf.h> having been included.
583 Add DLT_DBUS, for raw D-Bus messages.
584 Treat either EPERM or EACCES as "no soup for you".
585 Changes to permissions on DLPI systems.
586 Add DLT_IEEE802_15_4_NOFCS for 802.15.4 interfaces.
588 Fri. August 6, 2010. guy@alum.mit.edu.
589 Summary for 1.1.2 libpcap release
590 Return DLT_ values, not raw LINKTYPE_ values from
591 pcap_datalink() when reading pcap-ng files
592 Add support for "wlan ra" and "wlan ta", to check the RA and TA
593 of WLAN frames that have them
594 Don't crash if "wlan addr{1,2,3,4}" are used without 802.11
596 Do filtering on USB and Bluetooth capturing
597 On FreeBSD/SPARC64, use -fPIC - it's apparently necessary
598 Check for valid port numbers (fit in a 16-bit unsigned field) in
600 Reject attempts to put savefiles into non-blocking mode
601 Check for "no such device" for the "get the media types" ioctl
603 Improve error messages from bpf_open(), and let it do the error
605 Return more specific errors from pcap_can_set_rfmon(); fix
607 Update description fetching code for FreeBSD, fix code for
609 Ignore /sys/net/dev files if we get ENODEV for them, not just
610 ENXIO; fixes handling of bonding devices on Linux
611 Fix check for a constant 0 argument to BPF_DIV
612 Use the right version of ar when cross-building
613 Free any filter set on a savefile when the savefile is closed
614 Include the CFLAGS setting when configure was run in the
616 Add support for 802.15.4 interfaces on Linux
618 Thu. April 1, 2010. guy@alum.mit.edu.
619 Summary for 1.1.1 libpcap release
620 Update CHANGES to reflect more of the changes in 1.1.0.
622 Fix shared library build on AIX.
624 Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu.
625 Summary for 1.1.0 libpcap release
626 Add SocketCAN capture support
627 Add Myricom SNF API support
628 Update Endace DAG and ERF support
629 Add support for shared libraries on Solaris, HP-UX, and AIX
630 Build, install, and un-install shared libraries by default;
631 don't build/install shared libraries on platforms we don't support
632 Fix building from a directory other than the source directory
633 Fix compiler warnings and builds on some platforms
634 Update config.guess and config.sub
635 Support monitor mode on mac80211 devices on Linux
636 Fix USB memory-mapped capturing on Linux; it requires a new DLT_
638 On Linux, scan /sys/class/net for devices if we have it; scan
639 it, or /proc/net/dev if we don't have /sys/class/net, even if
640 we have getifaddrs(), as it'll find interfaces with no
642 Add limited support for reading pcap-ng files
643 Fix BPF driver-loading error handling on AIX
644 Support getting the full-length interface description on FreeBSD
645 In the lexical analyzer, free up any addrinfo structure we got back
647 Add support for BPF and libdlpi in OpenSolaris (and SXCE)
648 Hyphenate "link-layer" everywhere
649 Add /sys/kernel/debug/usb/usbmon to the list of usbmon locations
650 In pcap_read_linux_mmap(), if there are no frames available, call
651 poll() even if we're in non-blocking mode, so we pick up
652 errors, and check for the errors in question.
653 Note that poll() works on BPF devices is Snow Leopard
654 If an ENXIO or ENETDOWN is received, it may mean the device has
655 gone away. Deal with it.
656 For BPF, raise the default capture buffer size to from 32k to 512k
657 Support ps_ifdrop on Linux
658 Added a bunch of #ifdef directives to make wpcap.dll (WinPcap) compile
660 Changes to Linux mmapped captures.
661 Fix bug where create_ring would fail for particular snaplen and
662 buffer size combinations
663 Update pcap-config so that it handles libpcap requiring
665 Add workaround for threadsafeness on Windows
666 Add missing mapping for DLT_ENC <-> LINKTYPE_ENC
667 DLT: Add DLT_CAN_SOCKETCAN
668 DLT: Add Solaris ipnet
669 Don't check for DLT_IPNET if it's not defined
670 Add link-layer types for Fibre Channel FC-2
671 Add link-layer types for Wireless HART
672 Add link-layer types for AOS
673 Add link-layer types for DECT
674 Autoconf fixes (AIX, HP-UX, OSF/1, Tru64 cleanups)
675 Install headers unconditionally, and include vlan.h/bluetooth.h if
677 Autoconf fixes+cleanup
678 Support enabling/disabling bluetooth (--{en,dis}able-bluetooth)
679 Support disabling SITA support (--without-sita)
680 Return -1 on failure to create packet ring (if supported but
682 Fix handling of 'any' device, so that it can be opened, and no longer
683 attempt to open it in Monitor mode
684 Add support for snapshot length for USB Memory-Mapped Interface
685 Fix configure and build on recent Linux kernels
686 Fix memory-mapped Linux capture to support pcap_next() and
688 Fixes for Linux USB capture
689 DLT: Add DLT_LINUX_EVDEV
690 DLT: Add DLT_GSMTAP_UM
691 DLT: Add DLT_GSMTAP_ABIS
693 Mon. October 27, 2008. ken@netfunctional.ca. Summary for 1.0.0 libpcap release
694 Compile with IPv6 support by default
695 Compile with large file support on by default
696 Add pcap-config script, which deals with -I/-L flags for compiling
699 DLT: Add AX25 (AX.25 w/KISS header)
702 Variable length 802.11 header support
703 X2E data type support
704 SITA ACN Interface support - see README.sita
705 Support for memory-mapped capture on Linux
706 Support for zerocopy BPF on platforms that support it
707 Support for setting buffer size when opening devices
708 Support for setting monitor mode when opening 802.11 devices
709 Better support for dealing with VLAN tagging/stripping on Linux
710 Fix dynamic library support on OSX
711 Return PCAP_ERROR_IFACE_NOT_UP if the interface isn't 'UP', so applications
712 can print better diagnostic information
713 Return PCAP_ERROR_PERM_DENIED if we don't have permission to open a device, so
714 applications can tell the user they need to go play with permissions
715 On Linux, ignore ENETDOWN so we can continue to capture packets if the
716 interface goes down and comes back up again.
717 On Linux, support new tpacket frame headers (2.6.27+)
718 On Mac OS X, add scripts for changing permissions on /dev/bpf* and launchd plist
719 On Solaris, support 'passive mode' on systems that support it
720 Fixes to autoconf and general build environment
721 Man page reorganization + cleanup
722 Autogenerate VERSION numbers better
724 Mon. September 10, 2007. ken@xelerance.com. Summary for 0.9.8 libpcap release
725 Change build process to put public libpcap headers into pcap subir
726 DLT: Add value for IPMI IPMB packets
727 DLT: Add value for u10 Networks boards
728 Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
729 libpcap files on an OS other than where the file was generated
731 Wed. April 25, 2007. ken@xelerance.com. Summary for 0.9.6 libpcap release
733 Put the public libpcap headers into a pcap subdirectory in both the
734 source directory and the target include directory, and have include
735 files at the top-level directory to include those headers, for
736 backwards compatibility.
737 Add Bluetooth support
738 Add USB capturing support on Linux
739 Add support for the binary USB sniffing interface in Linux
740 Add support for new FreeBSD BIOCSDIRECTION ioctl
741 Add additional filter operations for 802.11 frame types
742 Add support for filtering on MTP2 frame types
743 Propagate some changes from the main branch, so the x.9 branch has
744 all the DLT_ and LINKTYPE_ values that the main branch does
745 Reserved a DLT_ and SAVEFILE_ value for PPI (Per Packet Info)
747 Add LINKTYPE_ for IEEE 802.15.4, with address fields padded as done
749 Add LINKTYPE_ value corresponding to DLT_IEEE802_16_MAC_CPS.
750 Add DLT for IEEE 802.16 (WiMAX) MAC Common Part Sublayer
751 Add DLT for Bluetooth HCI UART transport layer
752 When building a shared library, build with "-fPIC" on Linux to support x86_64
753 Link with "$(CC) -shared" rather than "ld -shared" when building a
755 Add support for autoconf 2.60
756 Fixes to discard unread packets when changing filters
757 Changes to handle name changes in the DAG library resulting from
758 switching to libtool.
759 Add support for new DAG ERF types.
760 Add an explicit "-ldag" when building the shared library, so the DAG
761 library dependency is explicit.
762 Mac OSX fixes for dealing with "wlt" devices
763 Fixes in add_or_find_if() & pcap_findalldevs() to optimize generating
765 Fixed a bug in pcap_open_live(). The return value of PacketSetHwFilter
768 Tue. September 19, 2006. ken@xelerance.com. Summary for 0.9.5 libpcap release
770 Support for LAPD frames with vISDN
771 Support for ERF on channelized T1/E1 cards via DAG API
772 Fix capitalization that caused issues crossc compiling on Linux
773 Better failure detection on PacketGetAdapterNames()
774 Fixes for MPLS packet generation (link layer)
775 OP_PACKET now matches the beginning of the packet, instead of
777 Add DLT/LINKTYPE for carrying FRF.16 Multi-link Frame Relay
778 Fix allocation of buffer for list of link-layer types
779 Added a new DLT and LINKTYPE value for ARINC 653 Interpartition Communication Messages
780 Fixed a typo in a DLT value: it should start with DLT_ and not LINKTYPE_
781 Redefined DLT_CAN20B and LINKTYPE_CAN20B as #190 (as this is the right value for CAN).
782 Added definition for DLT_A429 and LINKTYPE_A429 as #184.
783 Added a new DLT and LINKTYPE value for CAN v2.0B frames.
784 Add support for DLT_JUNIPER_VP.
785 Don't double-count received packets on Linux systems that
786 support the PACKET_STATISTICS getsockopt() argument on
788 Add support for DLT_IEEE802_11 and DLT_IEEE802_11_RADIO link
790 Add support to build libpcap.lib and wpcap.dll under Cygnus and
793 Mon. September 5, 2005. ken@xelerance.com. Summary for 0.9.4 libpcap release
795 Support for radiotap on Linux (Mike Kershaw)
797 Support for additional Juniper link-layer types
798 Fixes for filters on MPLS-encapsulated packets
800 "pppoed" and "pppoes" filters added; the latter modifies later
801 parts of the filter expression to look at the PPP headers and
802 headers in the PPP payload
804 Tue. July 5, 2005. ken@xelerance.com. Summary for 0.9.3 libpcap release
806 Fixes for compiling on nearly every platform,
807 including improved 64bit support
809 Add support for sending packets
810 OpenBSD pf format support
811 IrDA capture (Linux only)
813 Tue. March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
815 Fixed minor problem in gencode.c that would appear on 64-bit
817 Version number is now sane.
819 Mon. March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
821 updates for autoconf 2.5
822 fixes for ppp interfaces for freebsd 4.1
823 pcap gencode can generate code for 802.11, IEEE1394, and pflog.
825 Wed. November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 0.8 release
827 added pcap_findalldevs()
828 Win32 patches from NetGroup, Politecnico di Torino (Italy)
829 OpenBSD pf, DLT_PFLOG added
830 Many changes to ATM support.
831 lookup pcap_lookupnet()
832 Added DLT_ARCNET_LINUX, DLT_ENC, DLT_IEEE802_11_RADIO, DLT_SUNATM,
833 DLT_IP_OVER_FC, DLT_FRELAY, others.
834 Sigh. More AIX wonderfulness.
836 Changes to API: pcap_next_ex(), pcap_breakloop(), pcap_dump_flush(),
837 pcap_list_datalinks(), pcap_set_datalink(),
838 pcap_lib_version(), pcap_datalink_val_to_name(),
839 pcap_datalink_name_to_val(), new error returns.
841 Tuesday, February 25, 2003. fenner@research.att.com. 0.7.2 release
843 Support link types that use 802.2 always, never, and sometimes.
844 Don't decrease the size of the BPF buffer from the default.
846 Handle 32-bit timestamps in DLPI, and pass the right buffer size.
847 Handle Linux systems with modern kernel but without
848 SOL_PACKET in the userland headers.
849 Linux support for ARPHRD_RAWHDLC.
850 Handle 32-bit timestamps in snoop.
851 Support eg (Octane/O2xxx/O3xxx Gigabit) devices.
852 Add new reserved DLT types.
854 Monday October 23, 2001. mcr@sandelman.ottawa.on.ca. Summary for 0.7 release
856 Added pcap_findalldevs() call to get list of interfaces in a MI way.
858 pcap_stats() has been documented as to what its counters mean on
861 Tuesday January 9, 2001. guy@alum.mit.edu. Summary for 0.6 release
863 New Linux libpcap implementation, which, in 2.2 and later
864 kernels, uses PF_PACKET sockets and supports kernel packet
865 filtering (if compiled into the kernel), and supports the "any"
866 device for capturing on all interfaces. Cleans up promiscuous
867 mode better on pre-2.2 kernels, and has various other fixes
868 (handles 2.4 ARPHRD_IEEE802_TR, handles ISDN devices better,
869 doesn't show duplicate packets on loopback interface, etc.).
871 Fixed HP-UX libpcap implementation to correctly get the PPA for
872 an interface, to allow interfaces to be opened by interface name.
874 libpcap savefiles have system-independent link-layer type values
875 in the header, rather than sometimes platform-dependent DLT_
876 values, to make it easier to exchange capture files between
879 Non-standard capture files produced by some Linux tcpdumps, e.g.
880 the one from Red Hat Linux 6.2 and later, can now be read.
882 Updated autoconf stock files.
884 Filter expressions can filter on VLAN IDs and various OSI
885 protocols, and work on Token Ring (with non-source-routed
888 "pcap_open_dead()" added to allow compiling filter expressions
889 to pcap code without opening a capture device or capture file.
891 Header files fixed to allow use in C++ programs.
893 Removed dependency on native headers for packet layout.
894 Removed Linux specific headers that were shipped.
896 Security fixes: Strcpy replaced with strlcpy, sprintf replaced
899 Fixed bug that could cause subsequent "pcap_compile()"s to fail
900 erroneously after one compile failed.
902 Assorted other bug fixes.
904 README.aix and README.linux files added to describe
905 platform-specific issues.
907 "getifaddrs()" rather than SIOCGIFCONF used, if available.
909 v0.5 Sat Jun 10 11:09:15 PDT 2000
912 - Brought in KAME IPv6/IPsec bpf compiler.
914 - Support added for OpenBSD DLT_LOOP and BSD/OS DLT_C_HDLC (Cisco HDLC),
915 and changes to work around different BSDs having different DLT_ types
916 with the same numeric value.
918 Assar Westerlund <assar@sics.se>
919 - Building outside the source code tree fixed.
920 - Changed to write out time stamps with 32-bit seconds and microseconds
921 fields, regardless of whether those fields are 32 bits or 64 bits in
922 the OS's native "struct timeval".
923 - Changed "pcap_lookupdev()" to dynamically grow the buffer into which
924 the list of interfaces is read as necessary in order to hold the
927 Greg Troxel <gdt@ir.bbn.com>
928 - Added a new "pcap_compile_nopcap()", which lets you compile a filter
929 expression into a BPF program without having an open live capture or
932 v0.4 Sat Jul 25 12:40:09 PDT 1998
934 - Fix endian problem with DLT_NULL devices. From FreeBSD via Bill
935 Fenner (fenner@parc.xerox.com)
937 - Fix alignment problem with FDDI under DLPI. This was causing core
940 - Added configure options to disable flex and bison. Resulted from a
941 bug report by barnett@grymoire.crd.ge.com (Bruce Barnett). Also added
942 options to disable gcc and to force a particular packet capture type.
944 - Added support for Fore ATM interfaces (qaa and fa) under IRIX. Thanks
945 to John Hawkinson (jhawk@mit.edu)
947 - Change Linux PPP and SLIP to use DLT_RAW since the kernel does not
948 supply any "link layer" data.
950 - Change Linux to use SIOCGIFHWADDR ioctl to determine link layer type.
951 Thanks to Thomas Sailer (sailer@ife.ee.ethz.ch)
953 - Change IRIX PPP to use DLT_RAW since the kernel does not supply any
956 - Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
959 - Added some new SGI snoop interface types. Thanks to Steve Alexander
960 (sca@refugee.engr.sgi.com)
962 - Fixes for HP-UX 10.20 (which is similar to HP-UX 9). Thanks to
963 Richard Allen (ra@hp.is) and Steinar Haug (sthaug@nethelp.no)
965 - Fddi supports broadcast as reported by Jeff Macdonald
966 (jeff@iacnet.com). Also correct ieee802 and arcnet.
968 - Determine Linux pcap buffer size at run time or else it might not be
969 big enough for some interface types (e.g. FDDI). Thanks to Jes
970 Sorensen (Jes.Sorensen@cern.ch)
972 - Fix some linux alignment problems.
974 - Document promisc argument to pcap_open_live(). Reported by Ian Marsh
977 - Support Metricom radio packets under Linux. Thanks to Kevin Lai
978 (laik@gunpowder.stanford.edu)
980 - Bind to interface name under Linux to avoid packets from multiple
981 interfaces on multi-homed hosts. Thanks to Kevin Lai
982 (laik@gunpowder.stanford.edu)
984 - Change L_SET to SEEK_SET for HP-UX. Thanks to Roland Roberts
985 (rroberts@muller.com)
987 - Fixed an uninitialized memory reference found by Kent Vander Velden
988 (graphix@iastate.edu)
990 - Fixed lex pattern for IDs to allow leading digits. As reported by
991 Theo de Raadt (deraadt@cvs.openbsd.org)
993 - Fixed Linux include file problems when using GNU libc.
995 - Ifdef ARPHRD_FDDI since not all versions of the Linux kernel have it.
996 Reported reported by Eric Jacksch (jacksch@tenebris.ca)
998 - Fixed bug in pcap_dispatch() that kept it from returning on packet
1001 - Changed ISLOOPBACK() macro when IFF_LOOPBACK isn't available to check
1002 for "lo" followed by an eos or digit (newer versions of Linux
1003 apparently call the loopback "lo" instead of "lo0").
1005 - Fixed Linux networking include files to use ints instead of longs to
1006 avoid problems with 64 bit longs on the alpha. Thanks to Cristian
1007 Gafton (gafton@redhat.com)
1009 v0.3 Sat Nov 30 20:56:27 PST 1996
1011 - Added Linux support.
1013 - Fixed savefile bugs.
1015 - Solaris x86 fix from Tim Rylance (t.rylance@elsevier.nl)
1017 - Add support for bpf kernel port filters.
1019 - Remove duplicate atalk protocol table entry. Thanks to Christian
1020 Hopps (chopps@water.emich.edu)
1022 - Fixed pcap_lookupdev() to ignore nonexistent devices. This was
1023 reported to happen under BSD/OS by David Vincenzetti
1024 (vince@cryptonet.it)
1026 - Avoid solaris compiler warnings. Thanks to Bruce Barnett
1027 (barnett@grymoire.crd.ge.com)
1029 v0.2.1 Sun Jul 14 03:02:26 PDT 1996
1031 - Fixes for HP-UX 10. Thanks in part to Thomas Wolfram
1032 (wolf@prz.tu-berlin.de) and Rick Jones (raj@hpisrdq.cup.hp.com)
1034 - Added support for SINIX. Thanks to Andrej Borsenkow
1035 (borsenkow.msk@sni.de)
1037 - Fixes for AIX (although this system is not yet supported). Thanks to
1038 John Hawkinson (jhawk@mit.edu)
1040 - Use autoconf's idea of the top level directory in install targets.
1041 Thanks to John Hawkinson.
1043 - Add missing autoconf packet capture result message. Thanks to Bill
1044 Fenner (fenner@parc.xerox.com)
1046 - Fixed padding problems in the pf module.
1048 - Fixed some more alignment problems on the alpha.
1050 - Added explicit netmask support. Thanks to Steve Nuchia
1051 (steve@research.oknet.com)
1053 - Fixed to handle raw ip addresses such as 0.0.0.1 without "left
1056 - Add "sca" keyword (for DEC cluster services) as suggested by Terry
1057 Kennedy (terry@spcvxa.spc.edu)
1059 - Add "atalk" keyword as suggested by John Hawkinson.
1061 - Add "igrp" keyword.
1063 - Fixed HID definition in grammar.y to be a string, not a value.
1065 - Use $CC when checking gcc version. Thanks to Carl Lindberg
1066 (carl_lindberg@blacksmith.com)
1068 - Removed obsolete reference to pcap_immediate() from the man page.
1069 Michael Stolarchuk (mts@terminator.rs.itd.umich.edu)
1071 - DLT_NULL has a 4 byte family header. Thanks to Jeffrey Honig
1074 v0.2 Sun Jun 23 02:28:42 PDT 1996
1076 - Add support for HP-UX. Resulted from code contributed by Tom Murray
1077 (tmurray@hpindck.cup.hp.com) and Philippe-Andri Prindeville
1078 (philipp@res.enst.fr)
1080 - Update INSTALL with a reminder to install include files. Thanks to
1081 Mark Andrews (mandrews@aw.sgi.com)
1083 - Fix bpf compiler alignment bug on the alpha.
1085 - Use autoconf to detect architectures that can't handle misaligned
1088 - Added loopback support for snoop. Resulted from report Steve
1089 Alexander (sca@engr.sgi.com)
1091 v0.1 Fri Apr 28 18:11:03 PDT 1995
1093 - Fixed compiler and optimizer bugs. The BPF filter engine uses unsigned
1094 comparison operators, while the code generator and optimizer assumed
1095 signed semantics in several places. Thanks to Charlie Slater
1096 (cslater@imatek.com) for pointing this out.
1098 - Removed FDDI ifdef's, they aren't really needed. Resulted from report
1099 by Gary Veum (veum@boa.gsfc.nasa.gov).
1101 - Add pcap-null.c which allows offline use of libpcap on systems that
1102 don't support live package capture. This feature resulting from a
1103 request from Jan van Oorschot (j.p.m.voorschot@et.tudelft.nl).
1105 - Make bpf_compile() reentrant. Fix thanks to Pascal Hennequin
1106 (Pascal.Hennequin@hugo.int-evry.fr).
1108 - Port to GNU autoconf.
1110 - Fix pcap-dlpi.c to work with isdn. Resulted from report by Flemming
1111 Johansen (fsj@csd.cri.dk).
1113 - Handle multi-digit interface unit numbers (aka ppa's) under dlpi.
1114 Resulted from report by Daniel Ehrlich (ehrlich@cse.psu.edu).
1116 - Fix pcap-dlpi.c to work in non-promiscuous mode. Resulted from report
1117 by Jeff Murphy (jcmurphy@acsu.buffalo.edu).
1119 - Add support for "long jumps". Thanks to Jeffrey Mogul
1122 - Fix minor problems when compiling with BDEBUG as noticed by Scott
1123 Bertilson (scott@unet.umn.edu).
1125 - Declare sys_errlist "const char *const" to avoid problems under
1126 FreeBSD. Resulted from report by jher@eden.com.
1128 v0.0.6 Fri Apr 28 04:07:13 PDT 1995
1130 - Add missing variable declaration missing from 0.0.6
1132 v0.0.5 Fri Apr 28 00:22:21 PDT 1995
1134 - Workaround for problems when pcap_read() returns 0 due to the timeout
1137 v0.0.4 Thu Apr 20 20:41:48 PDT 1995
1139 - Change configuration to not use gcc v2 flags with gcc v1.
1141 - Fixed a bug in pcap_next(); if pcap_dispatch() returns 0, pcap_next()
1142 should also return 0. Thanks to Richard Stevens (rstevens@noao.edu).
1144 - Fixed configure to test for snoop before dlpi to avoid problems under
1145 IRIX 5. Thanks to J. Eric Townsend (jet@abulafia.genmagic.com).
1147 - Hack around deficiency in Ultrix's make.
1149 - Fix two bugs related to the Solaris pre-5.3.2 bufmod bug; handle
1150 savefiles that have more than snapshot bytes of data in them (so we
1151 can read old savefiles) and avoid writing such files.
1153 - Added checkioctl which is used with gcc to check that the
1154 "fixincludes" script has been run.
1156 v0.0.3 Tue Oct 18 18:13:46 PDT 1994
1158 - Fixed configure to test for snoop before dlpi to avoid problems under
1159 IRIX 5. Thanks to J. Eric Townsend (jet@abulafia.genmagic.com).
1161 v0.0.2 Wed Oct 12 20:56:37 PDT 1994
1163 - Implement timeout in the dlpi pcap_open_live(). Thanks to Richard
1166 - Determine pcap link type from dlpi media type. Resulted from report
1167 by Mahesh Jethanandani (mahesh@npix.com).
1169 v0.0.1 Fri Jun 24 14:50:57 PDT 1994
1171 - Fixed bug in nit_setflags() in pcap-snit.c. The streams ioctl timeout
1172 wasn't being initialized sometimes resulting in an "NIOCSFLAGS:
1173 Invalid argument" error under OSF/1. Reported by Matt Day
1174 (mday@artisoft.com) and Danny Mitzel (dmitzel@whitney.hitc.com).
1176 - Turn on FDDI support by default.
1178 v0.0 Mon Jun 20 19:20:16 PDT 1994
1182 - Fixed bug with greater/less keywords, reported by Mark Andrews
1183 (mandrews@alias.com).
1185 - Fix bug where '|' was defined as BPF_AND instead of BPF_OR, reported
1186 by Elan Amir (elan@leeb.cs.berkeley.edu).
1188 - Machines with little-endian byte ordering are supported thanks to
1191 - Add hack for version 2.3 savefiles which don't have caplen and len
1192 swapped thanks to Vern Paxson.
1194 - Added "&&" and "||" aliases for "and" and "or" thanks to Vern Paxson.
1196 - Added length, inbound and outbound keywords.