sys/sys/soundcard.h

   1 /*
   2  * soundcard.h
   3  *
   4  * Copyright by Hannu Savolainen 1993
   5  * Modified for the new FreeBSD sound driver by Luigi Rizzo, 1997
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above
  13  *    copyright notice, this list of conditions and the following
  14  *    disclaimer in the documentation and/or other materials provided
  15  *    with the distribution.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
  18  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  19  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
  20  * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR
  21  * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  22  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  23  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  24  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  25  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  27  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  28  * POSSIBILITY OF SUCH DAMAGE.
  29  *
  30  * $FreeBSD: src/sys/sys/soundcard.h,v 1.33.2.4 2003/06/07 21:31:56 mbr Exp $
  31  * $DragonFly: src/sys/sys/soundcard.h,v 1.5 2004/09/23 16:13:21 joerg Exp $
  32  */
  33
  34 #ifndef _SYS_SOUNDCARD_H_
  35 #define _SYS_SOUNDCARD_H_
  36  /*
  37   * If you make modifications to this file, please contact me before
  38   * distributing the modified version. There is already enough
  39   * diversity in the world.
  40   *
  41   * Regards,
  42   * Hannu Savolainen
  43   * hannu@voxware.pp.fi
  44   *
  45   **********************************************************************
  46   * PS. The Hacker's Guide to VoxWare available from
  47   *     nic.funet.fi:pub/Linux/ALPHA/sound. The file is
  48   *     snd-sdk-doc-0.1.ps.gz (gzipped postscript). It contains
  49   *     some useful information about programming with VoxWare.
  50   *     (NOTE! The pub/Linux/ALPHA/ directories are hidden. You have
  51   *     to cd inside them before the files are accessible.)
  52   **********************************************************************
  53   */
  54
  55 /*
  56  * SOUND_VERSION is only used by the voxware driver. Hopefully apps
  57  * should not depend on it, but rather look at the capabilities
  58  * of the driver in the kernel!
  59  */
  60 #define SOUND_VERSION  301
  61 #define VOXWARE         /* does this have any use ? */
  62
  63 /*
  64  * Supported card ID numbers (Should be somewhere else? We keep
  65  * them here just for compativility with the old driver, but these
  66  * constants are of little or no use).
  67  */
  68
  69 #define SNDCARD_ADLIB          1
  70 #define SNDCARD_SB             2
  71 #define SNDCARD_PAS            3
  72 #define SNDCARD_GUS            4
  73 #define SNDCARD_MPU401         5
  74 #define SNDCARD_SB16           6
  75 #define SNDCARD_SB16MIDI       7
  76 #define SNDCARD_UART6850       8
  77 #define SNDCARD_GUS16          9
  78 #define SNDCARD_MSS            10
  79 #define SNDCARD_PSS            11
  80 #define SNDCARD_SSCAPE         12
  81 #define SNDCARD_PSS_MPU        13
  82 #define SNDCARD_PSS_MSS        14
  83 #define SNDCARD_SSCAPE_MSS     15
  84 #define SNDCARD_TRXPRO         16
  85 #define SNDCARD_TRXPRO_SB      17
  86 #define SNDCARD_TRXPRO_MPU     18
  87 #define SNDCARD_MAD16          19
  88 #define SNDCARD_MAD16_MPU      20
  89 #define SNDCARD_CS4232         21
  90 #define SNDCARD_CS4232_MPU     22
  91 #define SNDCARD_MAUI           23
  92 #define SNDCARD_PSEUDO_MSS     24
  93 #define SNDCARD_AWE32           25
  94 #define SNDCARD_NSS            26
  95 #define SNDCARD_UART16550      27
  96 #define SNDCARD_OPL            28
  97
  98 #include <sys/types.h>
  99 #include <machine/endian.h>
 100 #ifndef _IOWR
 101 #include <sys/ioccom.h>
 102 #endif  /* !_IOWR */
 103
 104 /*
 105  * The first part of this file contains the new FreeBSD sound ioctl
 106  * interface. Tries to minimize the number of different ioctls, and
 107  * to be reasonably general.
 108  *
 109  * 970821: some of the new calls have not been implemented yet.
 110  */
 111
 112 /*
 113  * the following three calls extend the generic file descriptor
 114  * interface. AIONWRITE is the dual of FIONREAD, i.e. returns the max
 115  * number of bytes for a write operation to be non-blocking.
 116  *
 117  * AIOGSIZE/AIOSSIZE are used to change the behaviour of the device,
 118  * from a character device (default) to a block device. In block mode,
 119  * (not to be confused with blocking mode) the main difference for the
 120  * application is that select() will return only when a complete
 121  * block can be read/written to the device, whereas in character mode
 122  * select will return true when one byte can be exchanged. For audio
 123  * devices, character mode makes select almost useless since one byte
 124  * will always be ready by the next sample time (which is often only a
 125  * handful of microseconds away).
 126  * Use a size of 0 or 1 to return to character mode.
 127  */
 128 #define AIONWRITE   _IOR('A', 10, int)   /* get # bytes to write */
 129 struct snd_size {
 130     int play_size;
 131     int rec_size;
 132 };
 133 #define AIOGSIZE    _IOR('A', 11, struct snd_size)/* read current blocksize */
 134 #define AIOSSIZE    _IOWR('A', 11, struct snd_size)  /* sets blocksize */
 135
 136 /*
 137  * The following constants define supported audio formats. The
 138  * encoding follows voxware conventions, i.e. 1 bit for each supported
 139  * format. We extend it by using bit 31 (RO) to indicate full-duplex
 140  * capability, and bit 29 (RO) to indicate that the card supports/
 141  * needs different formats on capture & playback channels.
 142  * Bit 29 (RW) is used to indicate/ask stereo.
 143  *
 144  * The number of bits required to store the sample is:
 145  *  o  4 bits for the IDA ADPCM format,
 146  *  o  8 bits for 8-bit formats, mu-law and A-law,
 147  *  o  16 bits for the 16-bit formats, and
 148  *  o  32 bits for the 24/32-bit formats.
 149  *  o  undefined for the MPEG audio format.
 150  */
 151
 152 #define AFMT_QUERY      0x00000000      /* Return current format */
 153 #define AFMT_MU_LAW     0x00000001      /* Logarithmic mu-law */
 154 #define AFMT_A_LAW      0x00000002      /* Logarithmic A-law */
 155 #define AFMT_IMA_ADPCM  0x00000004      /* A 4:1 compressed format where 16-bit
 156                                          * squence represented using the
 157                                          * the average 4 bits per sample */
 158 #define AFMT_U8         0x00000008      /* Unsigned 8-bit */
 159 #define AFMT_S16_LE     0x00000010      /* Little endian signed 16-bit */
 160 #define AFMT_S16_BE     0x00000020      /* Big endian signed 16-bit */
 161 #define AFMT_S8         0x00000040      /* Signed 8-bit */
 162 #define AFMT_U16_LE     0x00000080      /* Little endian unsigned 16-bit */
 163 #define AFMT_U16_BE     0x00000100      /* Big endian unsigned 16-bit */
 164 #define AFMT_MPEG       0x00000200      /* MPEG MP2/MP3 audio */
 165 #define AFMT_AC3        0x00000400      /* Dolby Digital AC3 */
 166
 167 #if _BYTE_ORDER == _LITTLE_ENDIAN
 168 #define AFMT_S16_NE     AFMT_S16_LE     /* native endian signed 16 */
 169 #elif _BYTE_ORDER == _BIG_ENDIAN
 170 #define AFMT_S16_NE     AFMT_S16_BE
 171 #else
 172 #error "Byte order not implemented"
 173 #endif
 174
 175 /*
 176  * 32-bit formats below used for 24-bit audio data where the data is stored
 177  * in the 24 most significant bits and the least significant bits are not used
 178  * (should be set to 0).
 179  */
 180 #define AFMT_S32_LE     0x00001000      /* Little endian signed 32-bit */
 181 #define AFMT_S32_BE     0x00002000      /* Big endian signed 32-bit */
 182 #define AFMT_U32_LE     0x00004000      /* Little endian unsigned 32-bit */
 183 #define AFMT_U32_BE     0x00008000      /* Big endian unsigned 32-bit */
 184
 185 #define AFMT_STEREO     0x10000000      /* can do/want stereo   */
 186
 187 /*
 188  * the following are really capabilities
 189  */
 190 #define AFMT_WEIRD      0x20000000      /* weird hardware...    */
 191     /*
 192      * AFMT_WEIRD reports that the hardware might need to operate
 193      * with different formats in the playback and capture
 194      * channels when operating in full duplex.
 195      * As an example, SoundBlaster16 cards only support U8 in one
 196      * direction and S16 in the other one, and applications should
 197      * be aware of this limitation.
 198      */
 199 #define AFMT_FULLDUPLEX 0x80000000      /* can do full duplex   */
 200
 201 /*
 202  * The following structure is used to get/set format and sampling rate.
 203  * While it would be better to have things such as stereo, bits per
 204  * sample, endiannes, etc split in different variables, it turns out
 205  * that formats are not that many, and not all combinations are possible.
 206  * So we followed the Voxware approach of associating one bit to each
 207  * format.
 208  */
 209
 210 typedef struct _snd_chan_param {
 211     u_long      play_rate;      /* sampling rate                        */
 212     u_long      rec_rate;       /* sampling rate                        */
 213     u_long      play_format;    /* everything describing the format     */
 214     u_long      rec_format;     /* everything describing the format     */
 215 } snd_chan_param;
 216 #define AIOGFMT    _IOR('f', 12, snd_chan_param)   /* get format */
 217 #define AIOSFMT    _IOWR('f', 12, snd_chan_param)  /* sets format */
 218
 219 /*
 220  * The following structure is used to get/set the mixer setting.
 221  * Up to 32 mixers are supported, each one with up to 32 channels.
 222  */
 223 typedef struct _snd_mix_param {
 224     u_char      subdev; /* which output                         */
 225     u_char      line;   /* which input                          */
 226     u_char      left,right; /* volumes, 0..255, 0 = mute        */
 227 } snd_mix_param ;
 228
 229 /* XXX AIOGMIX, AIOSMIX not implemented yet */
 230 #define AIOGMIX _IOWR('A', 13, snd_mix_param)   /* return mixer status */
 231 #define AIOSMIX _IOWR('A', 14, snd_mix_param)   /* sets mixer status   */
 232
 233 /*
 234  * channel specifiers used in AIOSTOP and AIOSYNC
 235  */
 236 #define AIOSYNC_PLAY    0x1     /* play chan */
 237 #define AIOSYNC_CAPTURE 0x2     /* capture chan */
 238 /* AIOSTOP stop & flush a channel, returns the residual count */
 239 #define AIOSTOP _IOWR ('A', 15, int)
 240
 241 /* alternate method used to notify the sync condition */
 242 #define AIOSYNC_SIGNAL  0x100
 243 #define AIOSYNC_SELECT  0x200
 244
 245 /* what the 'pos' field refers to */
 246 #define AIOSYNC_READY   0x400
 247 #define AIOSYNC_FREE    0x800
 248
 249 typedef struct _snd_sync_parm {
 250     long chan ; /* play or capture channel, plus modifier */
 251     long pos;
 252 } snd_sync_parm;
 253 #define AIOSYNC _IOWR ('A', 15, snd_sync_parm)  /* misc. synchronization */
 254
 255 /*
 256  * The following is used to return device capabilities. If the structure
 257  * passed to the ioctl is zeroed, default values are returned for rate
 258  * and formats, a bitmap of available mixers is returned, and values
 259  * (inputs, different levels) for the first one are returned.
 260  *
 261  * If  formats, mixers, inputs are instantiated, then detailed info
 262  * are returned depending on the call.
 263  */
 264 typedef struct _snd_capabilities {
 265     u_long      rate_min, rate_max;     /* min-max sampling rate */
 266     u_long      formats;
 267     u_long      bufsize; /* DMA buffer size */
 268     u_long      mixers; /* bitmap of available mixers */
 269     u_long      inputs; /* bitmap of available inputs (per mixer) */
 270     u_short     left, right;    /* how many levels are supported */
 271 } snd_capabilities;
 272 #define AIOGCAP _IOWR('A', 15, snd_capabilities)        /* get capabilities */
 273
 274 /*
 275  * here is the old (Voxware) ioctl interface
 276  */
 277
 278 /*
 279  * IOCTL Commands for /dev/sequencer
 280  */
 281
 282 #define SNDCTL_SEQ_RESET        _IO  ('Q', 0)
 283 #define SNDCTL_SEQ_SYNC         _IO  ('Q', 1)
 284 #define SNDCTL_SYNTH_INFO       _IOWR('Q', 2, struct synth_info)
 285 #define SNDCTL_SEQ_CTRLRATE     _IOWR('Q', 3, int) /* Set/get timer res.(hz) */
 286 #define SNDCTL_SEQ_GETOUTCOUNT  _IOR ('Q', 4, int)
 287 #define SNDCTL_SEQ_GETINCOUNT   _IOR ('Q', 5, int)
 288 #define SNDCTL_SEQ_PERCMODE     _IOW ('Q', 6, int)
 289 #define SNDCTL_FM_LOAD_INSTR    _IOW ('Q', 7, struct sbi_instrument)    /* Valid for FM only */
 290 #define SNDCTL_SEQ_TESTMIDI     _IOW ('Q', 8, int)
 291 #define SNDCTL_SEQ_RESETSAMPLES _IOW ('Q', 9, int)
 292 #define SNDCTL_SEQ_NRSYNTHS     _IOR ('Q',10, int)
 293 #define SNDCTL_SEQ_NRMIDIS      _IOR ('Q',11, int)
 294 #define SNDCTL_MIDI_INFO        _IOWR('Q',12, struct midi_info)
 295 #define SNDCTL_SEQ_THRESHOLD    _IOW ('Q',13, int)
 296 #define SNDCTL_SEQ_TRESHOLD     SNDCTL_SEQ_THRESHOLD    /* there was once a typo */
 297 #define SNDCTL_SYNTH_MEMAVL     _IOWR('Q',14, int) /* in=dev#, out=memsize */
 298 #define SNDCTL_FM_4OP_ENABLE    _IOW ('Q',15, int) /* in=dev# */
 299 #define SNDCTL_PMGR_ACCESS      _IOWR('Q',16, struct patmgr_info)
 300 #define SNDCTL_SEQ_PANIC        _IO  ('Q',17)
 301 #define SNDCTL_SEQ_OUTOFBAND    _IOW ('Q',18, struct seq_event_rec)
 302
 303 struct seq_event_rec {
 304         u_char arr[8];
 305 };
 306
 307 #define SNDCTL_TMR_TIMEBASE     _IOWR('T', 1, int)
 308 #define SNDCTL_TMR_START        _IO  ('T', 2)
 309 #define SNDCTL_TMR_STOP         _IO  ('T', 3)
 310 #define SNDCTL_TMR_CONTINUE     _IO  ('T', 4)
 311 #define SNDCTL_TMR_TEMPO        _IOWR('T', 5, int)
 312 #define SNDCTL_TMR_SOURCE       _IOWR('T', 6, int)
 313 #   define TMR_INTERNAL         0x00000001
 314 #   define TMR_EXTERNAL         0x00000002
 315 #       define TMR_MODE_MIDI    0x00000010
 316 #       define TMR_MODE_FSK     0x00000020
 317 #       define TMR_MODE_CLS     0x00000040
 318 #       define TMR_MODE_SMPTE   0x00000080
 319 #define SNDCTL_TMR_METRONOME    _IOW ('T', 7, int)
 320 #define SNDCTL_TMR_SELECT       _IOW ('T', 8, int)
 321
 322 /*
 323  *      Endian aware patch key generation algorithm.
 324  */
 325
 326 #if defined(_AIX) || defined(AIX)
 327 #  define _PATCHKEY(id) (0xfd00|id)
 328 #else
 329 #  define _PATCHKEY(id) ((id<<8)|0xfd)
 330 #endif
 331
 332 /*
 333  *      Sample loading mechanism for internal synthesizers (/dev/sequencer)
 334  *      The following patch_info structure has been designed to support
 335  *      Gravis UltraSound. It tries to be universal format for uploading
 336  *      sample based patches but is probably too limited.
 337  */
 338
 339 struct patch_info {
 340 /*              u_short key;             Use GUS_PATCH here */
 341         short key;               /* Use GUS_PATCH here */
 342 #define GUS_PATCH       _PATCHKEY(0x04)
 343 #define OBSOLETE_GUS_PATCH      _PATCHKEY(0x02)
 344
 345         short device_no;        /* Synthesizer number */
 346         short instr_no;         /* Midi pgm# */
 347
 348         u_long mode;
 349 /*
 350  * The least significant byte has the same format than the GUS .PAT
 351  * files
 352  */
 353 #define WAVE_16_BITS    0x01    /* bit 0 = 8 or 16 bit wave data. */
 354 #define WAVE_UNSIGNED   0x02    /* bit 1 = Signed - Unsigned data. */
 355 #define WAVE_LOOPING    0x04    /* bit 2 = looping enabled-1. */
 356 #define WAVE_BIDIR_LOOP 0x08    /* bit 3 = Set is bidirectional looping. */
 357 #define WAVE_LOOP_BACK  0x10    /* bit 4 = Set is looping backward. */
 358 #define WAVE_SUSTAIN_ON 0x20    /* bit 5 = Turn sustaining on. (Env. pts. 3)*/
 359 #define WAVE_ENVELOPES  0x40    /* bit 6 = Enable envelopes - 1 */
 360                                 /*      (use the env_rate/env_offs fields). */
 361 /* Linux specific bits */
 362 #define WAVE_VIBRATO    0x00010000      /* The vibrato info is valid */
 363 #define WAVE_TREMOLO    0x00020000      /* The tremolo info is valid */
 364 #define WAVE_SCALE      0x00040000      /* The scaling info is valid */
 365 /* Other bits must be zeroed */
 366
 367         long len;       /* Size of the wave data in bytes */
 368         long loop_start, loop_end; /* Byte offsets from the beginning */
 369
 370 /*
 371  * The base_freq and base_note fields are used when computing the
 372  * playback speed for a note. The base_note defines the tone frequency
 373  * which is heard if the sample is played using the base_freq as the
 374  * playback speed.
 375  *
 376  * The low_note and high_note fields define the minimum and maximum note
 377  * frequencies for which this sample is valid. It is possible to define
 378  * more than one samples for a instrument number at the same time. The
 379  * low_note and high_note fields are used to select the most suitable one.
 380  *
 381  * The fields base_note, high_note and low_note should contain
 382  * the note frequency multiplied by 1000. For example value for the
 383  * middle A is 440*1000.
 384  */
 385
 386         u_int base_freq;
 387         u_long base_note;
 388         u_long high_note;
 389         u_long low_note;
 390         int panning;    /* -128=left, 127=right */
 391         int detuning;
 392
 393 /*      New fields introduced in version 1.99.5 */
 394
 395        /* Envelope. Enabled by mode bit WAVE_ENVELOPES  */
 396         u_char  env_rate[ 6 ];   /* GUS HW ramping rate */
 397         u_char  env_offset[ 6 ]; /* 255 == 100% */
 398
 399         /*
 400          * The tremolo, vibrato and scale info are not supported yet.
 401          * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
 402          * WAVE_SCALE
 403          */
 404
 405         u_char  tremolo_sweep;
 406         u_char  tremolo_rate;
 407         u_char  tremolo_depth;
 408
 409         u_char  vibrato_sweep;
 410         u_char  vibrato_rate;
 411         u_char  vibrato_depth;
 412
 413         int             scale_frequency;
 414         u_int   scale_factor;           /* from 0 to 2048 or 0 to 2 */
 415
 416         int             volume;
 417         int             spare[4];
 418         char data[1];   /* The waveform data starts here */
 419 };
 420
 421 struct sysex_info {
 422         short key;              /* Use GUS_PATCH here */
 423 #define SYSEX_PATCH     _PATCHKEY(0x05)
 424 #define MAUI_PATCH      _PATCHKEY(0x06)
 425         short device_no;        /* Synthesizer number */
 426         long len;       /* Size of the sysex data in bytes */
 427         u_char data[1]; /* Sysex data starts here */
 428 };
 429
 430 /*
 431  * Patch management interface (/dev/sequencer, /dev/patmgr#)
 432  * Don't use these calls if you want to maintain compatibility with
 433  * the future versions of the driver.
 434  */
 435
 436 #define PS_NO_PATCHES           0       /* No patch support on device */
 437 #define PS_MGR_NOT_OK           1       /* Plain patch support (no mgr) */
 438 #define PS_MGR_OK               2       /* Patch manager supported */
 439 #define PS_MANAGED              3       /* Patch manager running */
 440
 441 #define SNDCTL_PMGR_IFACE               _IOWR('P', 1, struct patmgr_info)
 442
 443 /*
 444  * The patmgr_info is a fixed size structure which is used for two
 445  * different purposes. The intended use is for communication between
 446  * the application using /dev/sequencer and the patch manager daemon
 447  * associated with a synthesizer device (ioctl(SNDCTL_PMGR_ACCESS)).
 448  *
 449  * This structure is also used with ioctl(SNDCTL_PGMR_IFACE) which allows
 450  * a patch manager daemon to read and write device parameters. This
 451  * ioctl available through /dev/sequencer also. Avoid using it since it's
 452  * extremely hardware dependent. In addition access trough /dev/sequencer
 453  * may confuse the patch manager daemon.
 454  */
 455
 456 struct patmgr_info {    /* Note! size must be < 4k since kmalloc() is used */
 457           u_long key;   /* Don't worry. Reserved for communication
 458                                    between the patch manager and the driver. */
 459 #define PM_K_EVENT              1 /* Event from the /dev/sequencer driver */
 460 #define PM_K_COMMAND            2 /* Request from a application */
 461 #define PM_K_RESPONSE           3 /* From patmgr to application */
 462 #define PM_ERROR                4 /* Error returned by the patmgr */
 463           int device;
 464           int command;
 465
 466 /*
 467  * Commands 0x000 to 0xfff reserved for patch manager programs
 468  */
 469 #define PM_GET_DEVTYPE  1       /* Returns type of the patch mgr interface of dev */
 470 #define         PMTYPE_FM2      1       /* 2 OP fm */
 471 #define         PMTYPE_FM4      2       /* Mixed 4 or 2 op FM (OPL-3) */
 472 #define         PMTYPE_WAVE     3       /* Wave table synthesizer (GUS) */
 473 #define PM_GET_NRPGM    2       /* Returns max # of midi programs in parm1 */
 474 #define PM_GET_PGMMAP   3       /* Returns map of loaded midi programs in data8 */
 475 #define PM_GET_PGM_PATCHES 4    /* Return list of patches of a program (parm1) */
 476 #define PM_GET_PATCH    5       /* Return patch header of patch parm1 */
 477 #define PM_SET_PATCH    6       /* Set patch header of patch parm1 */
 478 #define PM_READ_PATCH   7       /* Read patch (wave) data */
 479 #define PM_WRITE_PATCH  8       /* Write patch (wave) data */
 480
 481 /*
 482  * Commands 0x1000 to 0xffff are for communication between the patch manager
 483  * and the client
 484  */
 485 #define _PM_LOAD_PATCH  0x100
 486
 487 /*
 488  * Commands above 0xffff reserved for device specific use
 489  */
 490
 491         long parm1;
 492         long parm2;
 493         long parm3;
 494
 495         union {
 496                 u_char data8[4000];
 497                 u_short data16[2000];
 498                 u_long data32[1000];
 499                 struct patch_info patch;
 500         } data;
 501 };
 502
 503 /*
 504  * When a patch manager daemon is present, it will be informed by the
 505  * driver when something important happens. For example when the
 506  * /dev/sequencer is opened or closed. A record with key == PM_K_EVENT is
 507  * returned. The command field contains the event type:
 508  */
 509 #define PM_E_OPENED             1       /* /dev/sequencer opened */
 510 #define PM_E_CLOSED             2       /* /dev/sequencer closed */
 511 #define PM_E_PATCH_RESET        3       /* SNDCTL_RESETSAMPLES called */
 512 #define PM_E_PATCH_LOADED       4       /* A patch has been loaded by appl */
 513
 514 /*
 515  * /dev/sequencer input events.
 516  *
 517  * The data written to the /dev/sequencer is a stream of events. Events
 518  * are records of 4 or 8 bytes. The first byte defines the size.
 519  * Any number of events can be written with a write call. There
 520  * is a set of macros for sending these events. Use these macros if you
 521  * want to maximize portability of your program.
 522  *
 523  * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
 524  * (All input events are currently 4 bytes long. Be prepared to support
 525  * 8 byte events also. If you receive any event having first byte >= 128,
 526  * it's a 8 byte event.
 527  *
 528  * The events are documented at the end of this file.
 529  *
 530  * Normal events (4 bytes)
 531  * There is also a 8 byte version of most of the 4 byte events. The
 532  * 8 byte one is recommended.
 533  */
 534 #define SEQ_NOTEOFF             0
 535 #define SEQ_FMNOTEOFF           SEQ_NOTEOFF     /* Just old name */
 536 #define SEQ_NOTEON              1
 537 #define SEQ_FMNOTEON            SEQ_NOTEON
 538 #define SEQ_WAIT                TMR_WAIT_ABS
 539 #define SEQ_PGMCHANGE           3
 540 #define SEQ_FMPGMCHANGE         SEQ_PGMCHANGE
 541 #define SEQ_SYNCTIMER           TMR_START
 542 #define SEQ_MIDIPUTC            5
 543 #define SEQ_DRUMON              6       /*** OBSOLETE ***/
 544 #define SEQ_DRUMOFF             7       /*** OBSOLETE ***/
 545 #define SEQ_ECHO                TMR_ECHO        /* For synching programs with output */
 546 #define SEQ_AFTERTOUCH          9
 547 #define SEQ_CONTROLLER          10
 548
 549 /*
 550  *      Midi controller numbers
 551  *
 552  * Controllers 0 to 31 (0x00 to 0x1f) and 32 to 63 (0x20 to 0x3f)
 553  * are continuous controllers.
 554  * In the MIDI 1.0 these controllers are sent using two messages.
 555  * Controller numbers 0 to 31 are used to send the MSB and the
 556  * controller numbers 32 to 63 are for the LSB. Note that just 7 bits
 557  * are used in MIDI bytes.
 558  */
 559
 560 #define CTL_BANK_SELECT         0x00
 561 #define CTL_MODWHEEL            0x01
 562 #define CTL_BREATH              0x02
 563 /*      undefined               0x03 */
 564 #define CTL_FOOT                0x04
 565 #define CTL_PORTAMENTO_TIME     0x05
 566 #define CTL_DATA_ENTRY          0x06
 567 #define CTL_MAIN_VOLUME         0x07
 568 #define CTL_BALANCE             0x08
 569 /*      undefined               0x09 */
 570 #define CTL_PAN                 0x0a
 571 #define CTL_EXPRESSION          0x0b
 572 /*      undefined               0x0c - 0x0f */
 573 #define CTL_GENERAL_PURPOSE1    0x10
 574 #define CTL_GENERAL_PURPOSE2    0x11
 575 #define CTL_GENERAL_PURPOSE3    0x12
 576 #define CTL_GENERAL_PURPOSE4    0x13
 577 /*      undefined               0x14 - 0x1f */
 578
 579 /*      undefined               0x20 */
 580
 581 /*
 582  * The controller numbers 0x21 to 0x3f are reserved for the
 583  * least significant bytes of the controllers 0x00 to 0x1f.
 584  * These controllers are not recognised by the driver.
 585  *
 586  * Controllers 64 to 69 (0x40 to 0x45) are on/off switches.
 587  * 0=OFF and 127=ON (intermediate values are possible)
 588  */
 589 #define CTL_DAMPER_PEDAL        0x40
 590 #define CTL_SUSTAIN             CTL_DAMPER_PEDAL        /* Alias */
 591 #define CTL_HOLD                CTL_DAMPER_PEDAL        /* Alias */
 592 #define CTL_PORTAMENTO          0x41
 593 #define CTL_SOSTENUTO           0x42
 594 #define CTL_SOFT_PEDAL          0x43
 595 /*      undefined               0x44 */
 596 #define CTL_HOLD2               0x45
 597 /*      undefined               0x46 - 0x4f */
 598
 599 #define CTL_GENERAL_PURPOSE5    0x50
 600 #define CTL_GENERAL_PURPOSE6    0x51
 601 #define CTL_GENERAL_PURPOSE7    0x52
 602 #define CTL_GENERAL_PURPOSE8    0x53
 603 /*      undefined               0x54 - 0x5a */
 604 #define CTL_EXT_EFF_DEPTH       0x5b
 605 #define CTL_TREMOLO_DEPTH       0x5c
 606 #define CTL_CHORUS_DEPTH        0x5d
 607 #define CTL_DETUNE_DEPTH        0x5e
 608 #define CTL_CELESTE_DEPTH       CTL_DETUNE_DEPTH /* Alias for the above one */
 609 #define CTL_PHASER_DEPTH        0x5f
 610 #define CTL_DATA_INCREMENT      0x60
 611 #define CTL_DATA_DECREMENT      0x61
 612 #define CTL_NONREG_PARM_NUM_LSB 0x62
 613 #define CTL_NONREG_PARM_NUM_MSB 0x63
 614 #define CTL_REGIST_PARM_NUM_LSB 0x64
 615 #define CTL_REGIST_PARM_NUM_MSB 0x65
 616 /*      undefined               0x66 - 0x78 */
 617 /*      reserved                0x79 - 0x7f */
 618
 619 /* Pseudo controllers (not midi compatible) */
 620 #define CTRL_PITCH_BENDER       255
 621 #define CTRL_PITCH_BENDER_RANGE 254
 622 #define CTRL_EXPRESSION         253     /* Obsolete */
 623 #define CTRL_MAIN_VOLUME        252     /* Obsolete */
 624
 625 #define SEQ_BALANCE             11
 626 #define SEQ_VOLMODE             12
 627
 628 /*
 629  * Volume mode decides how volumes are used
 630  */
 631
 632 #define VOL_METHOD_ADAGIO       1
 633 #define VOL_METHOD_LINEAR       2
 634
 635 /*
 636  * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
 637  *       input events.
 638  */
 639
 640 /*
 641  * Event codes 0xf0 to 0xfc are reserved for future extensions.
 642  */
 643
 644 #define SEQ_FULLSIZE            0xfd    /* Long events */
 645 /*
 646  * SEQ_FULLSIZE events are used for loading patches/samples to the
 647  * synthesizer devices. These events are passed directly to the driver
 648  * of the associated synthesizer device. There is no limit to the size
 649  * of the extended events. These events are not queued but executed
 650  * immediately when the write() is called (execution can take several
 651  * seconds of time).
 652  *
 653  * When a SEQ_FULLSIZE message is written to the device, it must
 654  * be written using exactly one write() call. Other events cannot
 655  * be mixed to the same write.
 656  *
 657  * For FM synths (YM3812/OPL3) use struct sbi_instrument and write
 658  * it to the /dev/sequencer. Don't write other data together with
 659  * the instrument structure Set the key field of the structure to
 660  * FM_PATCH. The device field is used to route the patch to the
 661  * corresponding device.
 662  *
 663  * For Gravis UltraSound use struct patch_info. Initialize the key field
 664  * to GUS_PATCH.
 665  */
 666 #define SEQ_PRIVATE     0xfe    /* Low level HW dependent events (8 bytes) */
 667 #define SEQ_EXTENDED    0xff    /* Extended events (8 bytes) OBSOLETE */
 668
 669 /*
 670  * Record for FM patches
 671  */
 672
 673 typedef u_char sbi_instr_data[32];
 674
 675 struct sbi_instrument {
 676         u_short key;    /* FM_PATCH or OPL3_PATCH */
 677 #define FM_PATCH        _PATCHKEY(0x01)
 678 #define OPL3_PATCH      _PATCHKEY(0x03)
 679         short           device;         /* Synth# (0-4) */
 680         int             channel;        /* Program# to be initialized  */
 681         sbi_instr_data  operators;      /* Reg. settings for operator cells
 682                                          * (.SBI format)        */
 683 };
 684
 685 struct synth_info {     /* Read only */
 686         char    name[30];
 687         int     device;         /* 0-N. INITIALIZE BEFORE CALLING */
 688         int     synth_type;
 689 #define SYNTH_TYPE_FM                   0
 690 #define SYNTH_TYPE_SAMPLE               1
 691 #define SYNTH_TYPE_MIDI                 2       /* Midi interface */
 692
 693         int     synth_subtype;
 694 #define FM_TYPE_ADLIB                   0x00
 695 #define FM_TYPE_OPL3                    0x01
 696
 697 #define SAMPLE_TYPE_BASIC               0x10
 698 #define SAMPLE_TYPE_GUS                 SAMPLE_TYPE_BASIC
 699 #define SAMPLE_TYPE_AWE32               0x20
 700
 701         int     perc_mode;      /* No longer supported */
 702         int     nr_voices;
 703         int     nr_drums;       /* Obsolete field */
 704         int     instr_bank_size;
 705         u_long  capabilities;
 706 #define SYNTH_CAP_PERCMODE      0x00000001 /* No longer used */
 707 #define SYNTH_CAP_OPL3          0x00000002 /* Set if OPL3 supported */
 708 #define SYNTH_CAP_INPUT         0x00000004 /* Input (MIDI) device */
 709         int     dummies[19];    /* Reserve space */
 710 };
 711
 712 struct sound_timer_info {
 713         char name[32];
 714         int caps;
 715 };
 716
 717 #define MIDI_CAP_MPU401         1               /* MPU-401 intelligent mode */
 718
 719 struct midi_info {
 720         char            name[30];
 721         int             device;         /* 0-N. INITIALIZE BEFORE CALLING */
 722         u_long  capabilities;   /* To be defined later */
 723         int             dev_type;
 724         int             dummies[18];    /* Reserve space */
 725 };
 726
 727 /*
 728  * ioctl commands for the /dev/midi##
 729  */
 730 typedef struct {
 731         u_char cmd;
 732         char nr_args, nr_returns;
 733         u_char data[30];
 734 } mpu_command_rec;
 735
 736 #define SNDCTL_MIDI_PRETIME     _IOWR('m', 0, int)
 737 #define SNDCTL_MIDI_MPUMODE     _IOWR('m', 1, int)
 738 #define SNDCTL_MIDI_MPUCMD      _IOWR('m', 2, mpu_command_rec)
 739 #define MIOSPASSTHRU            _IOWR('m', 3, int)
 740 #define MIOGPASSTHRU            _IOWR('m', 4, int)
 741
 742 /*
 743  * IOCTL commands for /dev/dsp and /dev/audio
 744  */
 745
 746 #define SNDCTL_DSP_RESET        _IO  ('P', 0)
 747 #define SNDCTL_DSP_SYNC         _IO  ('P', 1)
 748 #define SNDCTL_DSP_SPEED        _IOWR('P', 2, int)
 749 #define SNDCTL_DSP_STEREO       _IOWR('P', 3, int)
 750 #define SNDCTL_DSP_GETBLKSIZE   _IOR('P', 4, int)
 751 #define SNDCTL_DSP_SETBLKSIZE   _IOW('P', 4, int)
 752 #define SNDCTL_DSP_SETFMT       _IOWR('P',5, int) /* Selects ONE fmt*/
 753
 754 /*
 755  * SOUND_PCM_WRITE_CHANNELS is not that different
 756  * from SNDCTL_DSP_STEREO
 757  */
 758 #define SOUND_PCM_WRITE_CHANNELS        _IOWR('P', 6, int)
 759 #define SNDCTL_DSP_CHANNELS     SOUND_PCM_WRITE_CHANNELS
 760 #define SOUND_PCM_WRITE_FILTER  _IOWR('P', 7, int)
 761 #define SNDCTL_DSP_POST         _IO  ('P', 8)
 762
 763 /*
 764  * SNDCTL_DSP_SETBLKSIZE and the following two calls mostly do
 765  * the same thing, i.e. set the block size used in DMA transfers.
 766  */
 767 #define SNDCTL_DSP_SUBDIVIDE    _IOWR('P', 9, int)
 768 #define SNDCTL_DSP_SETFRAGMENT  _IOWR('P',10, int)
 769
 770
 771 #define SNDCTL_DSP_GETFMTS      _IOR ('P',11, int) /* Returns a mask */
 772 /*
 773  * Buffer status queries.
 774  */
 775 typedef struct audio_buf_info {
 776     int fragments;      /* # of avail. frags (partly used ones not counted) */
 777     int fragstotal;     /* Total # of fragments allocated */
 778     int fragsize;       /* Size of a fragment in bytes */
 779
 780     int bytes;  /* Avail. space in bytes (includes partly used fragments) */
 781                 /* Note! 'bytes' could be more than fragments*fragsize */
 782 } audio_buf_info;
 783
 784 #define SNDCTL_DSP_GETOSPACE    _IOR ('P',12, audio_buf_info)
 785 #define SNDCTL_DSP_GETISPACE    _IOR ('P',13, audio_buf_info)
 786
 787 /*
 788  * SNDCTL_DSP_NONBLOCK is the same (but less powerful, since the
 789  * action cannot be undone) of FIONBIO. The same can be achieved
 790  * by opening the device with O_NDELAY
 791  */
 792 #define SNDCTL_DSP_NONBLOCK     _IO  ('P',14)
 793
 794 #define SNDCTL_DSP_GETCAPS      _IOR ('P',15, int)
 795 #define DSP_CAP_REVISION        0x000000ff /* revision level (0 to 255) */
 796 #define DSP_CAP_DUPLEX          0x00000100 /* Full duplex record/playback */
 797 #define DSP_CAP_REALTIME        0x00000200 /* Real time capability */
 798 #define DSP_CAP_BATCH           0x00000400
 799     /*
 800      * Device has some kind of internal buffers which may
 801      * cause some delays and decrease precision of timing
 802      */
 803 #define DSP_CAP_COPROC          0x00000800
 804     /* Has a coprocessor, sometimes it's a DSP but usually not */
 805 #define DSP_CAP_TRIGGER         0x00001000 /* Supports SETTRIGGER */
 806 #define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */
 807
 808 /*
 809  * What do these function do ?
 810  */
 811 #define SNDCTL_DSP_GETTRIGGER   _IOR ('P',16, int)
 812 #define SNDCTL_DSP_SETTRIGGER   _IOW ('P',16, int)
 813 #define PCM_ENABLE_INPUT        0x00000001
 814 #define PCM_ENABLE_OUTPUT       0x00000002
 815
 816 typedef struct count_info {
 817         int bytes;      /* Total # of bytes processed */
 818         int blocks;     /* # of fragment transitions since last time */
 819         int ptr;        /* Current DMA pointer value */
 820 } count_info;
 821
 822 /*
 823  * GETIPTR and GETISPACE are not that different... same for out.
 824  */
 825 #define SNDCTL_DSP_GETIPTR      _IOR ('P',17, count_info)
 826 #define SNDCTL_DSP_GETOPTR      _IOR ('P',18, count_info)
 827
 828 typedef struct buffmem_desc {
 829         caddr_t buffer;
 830         int size;
 831 } buffmem_desc;
 832
 833 #define SNDCTL_DSP_MAPINBUF     _IOR ('P', 19, buffmem_desc)
 834 #define SNDCTL_DSP_MAPOUTBUF    _IOR ('P', 20, buffmem_desc)
 835 #define SNDCTL_DSP_SETSYNCRO    _IO  ('P', 21)
 836 #define SNDCTL_DSP_SETDUPLEX    _IO  ('P', 22)
 837 #define SNDCTL_DSP_GETODELAY    _IOR ('P', 23, int)
 838
 839 /*
 840  * I guess these are the readonly version of the same
 841  * functions that exist above as SNDCTL_DSP_...
 842  */
 843 #define SOUND_PCM_READ_RATE     _IOR ('P', 2, int)
 844 #define SOUND_PCM_READ_CHANNELS _IOR ('P', 6, int)
 845 #define SOUND_PCM_READ_BITS     _IOR ('P', 5, int)
 846 #define SOUND_PCM_READ_FILTER   _IOR ('P', 7, int)
 847
 848 /*
 849  * ioctl calls to be used in communication with coprocessors and
 850  * DSP chips.
 851  */
 852
 853 typedef struct copr_buffer {
 854         int command;    /* Set to 0 if not used */
 855         int flags;
 856 #define CPF_NONE                0x0000
 857 #define CPF_FIRST               0x0001  /* First block */
 858 #define CPF_LAST                0x0002  /* Last block */
 859         int len;
 860         int offs;       /* If required by the device (0 if not used) */
 861
 862         u_char data[4000]; /* NOTE! 4000 is not 4k */
 863 } copr_buffer;
 864
 865 typedef struct copr_debug_buf {
 866         int command;    /* Used internally. Set to 0 */
 867         int parm1;
 868         int parm2;
 869         int flags;
 870         int len;        /* Length of data in bytes */
 871 } copr_debug_buf;
 872
 873 typedef struct copr_msg {
 874         int len;
 875         u_char data[4000];
 876 } copr_msg;
 877
 878 #define SNDCTL_COPR_RESET       _IO  ('C',  0)
 879 #define SNDCTL_COPR_LOAD        _IOWR('C',  1, copr_buffer)
 880 #define SNDCTL_COPR_RDATA       _IOWR('C',  2, copr_debug_buf)
 881 #define SNDCTL_COPR_RCODE       _IOWR('C',  3, copr_debug_buf)
 882 #define SNDCTL_COPR_WDATA       _IOW ('C',  4, copr_debug_buf)
 883 #define SNDCTL_COPR_WCODE       _IOW ('C',  5, copr_debug_buf)
 884 #define SNDCTL_COPR_RUN         _IOWR('C',  6, copr_debug_buf)
 885 #define SNDCTL_COPR_HALT        _IOWR('C',  7, copr_debug_buf)
 886 #define SNDCTL_COPR_SENDMSG     _IOW ('C',  8, copr_msg)
 887 #define SNDCTL_COPR_RCVMSG      _IOR ('C',  9, copr_msg)
 888
 889 /*
 890  * IOCTL commands for /dev/mixer
 891  */
 892
 893 /*
 894  * Mixer devices
 895  *
 896  * There can be up to 20 different analog mixer channels. The
 897  * SOUND_MIXER_NRDEVICES gives the currently supported maximum.
 898  * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
 899  * the devices supported by the particular mixer.
 900  */
 901
 902 #define SOUND_MIXER_NRDEVICES   25
 903 #define SOUND_MIXER_VOLUME      0       /* Master output level */
 904 #define SOUND_MIXER_BASS        1       /* Treble level of all output channels */
 905 #define SOUND_MIXER_TREBLE      2       /* Bass level of all output channels */
 906 #define SOUND_MIXER_SYNTH       3       /* Volume of synthesier input */
 907 #define SOUND_MIXER_PCM         4       /* Output level for the audio device */
 908 #define SOUND_MIXER_SPEAKER     5       /* Output level for the PC speaker
 909                                          * signals */
 910 #define SOUND_MIXER_LINE        6       /* Volume level for the line in jack */
 911 #define SOUND_MIXER_MIC         7       /* Volume for the signal coming from
 912                                          * the microphone jack */
 913 #define SOUND_MIXER_CD          8       /* Volume level for the input signal
 914                                          * connected to the CD audio input */
 915 #define SOUND_MIXER_IMIX        9       /* Recording monitor. It controls the
 916                                          * output volume of the selected
 917                                          * recording sources while recording */
 918 #define SOUND_MIXER_ALTPCM      10      /* Volume of the alternative codec
 919                                          * device */
 920 #define SOUND_MIXER_RECLEV      11      /* Global recording level */
 921 #define SOUND_MIXER_IGAIN       12      /* Input gain */
 922 #define SOUND_MIXER_OGAIN       13      /* Output gain */
 923 /*
 924  * The AD1848 codec and compatibles have three line level inputs
 925  * (line, aux1 and aux2). Since each card manufacturer have assigned
 926  * different meanings to these inputs, it's inpractical to assign
 927  * specific meanings (line, cd, synth etc.) to them.
 928  */
 929 #define SOUND_MIXER_LINE1       14      /* Input source 1  (aux1) */
 930 #define SOUND_MIXER_LINE2       15      /* Input source 2  (aux2) */
 931 #define SOUND_MIXER_LINE3       16      /* Input source 3  (line) */
 932 #define SOUND_MIXER_DIGITAL1    17      /* Digital (input) 1 */
 933 #define SOUND_MIXER_DIGITAL2    18      /* Digital (input) 2 */
 934 #define SOUND_MIXER_DIGITAL3    19      /* Digital (input) 3 */
 935 #define SOUND_MIXER_PHONEIN     20      /* Phone input */
 936 #define SOUND_MIXER_PHONEOUT    21      /* Phone output */
 937 #define SOUND_MIXER_VIDEO       22      /* Video/TV (audio) in */
 938 #define SOUND_MIXER_RADIO       23      /* Radio in */
 939 #define SOUND_MIXER_MONITOR     24      /* Monitor (usually mic) volume */
 940
 941
 942 /*
 943  * Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX)
 944  * Not counted to SOUND_MIXER_NRDEVICES, but use the same number space
 945  */
 946 #define SOUND_ONOFF_MIN         28
 947 #define SOUND_ONOFF_MAX         30
 948 #define SOUND_MIXER_MUTE        28      /* 0 or 1 */
 949 #define SOUND_MIXER_ENHANCE     29      /* Enhanced stereo (0, 40, 60 or 80) */
 950 #define SOUND_MIXER_LOUD        30      /* 0 or 1 */
 951
 952 /* Note!        Number 31 cannot be used since the sign bit is reserved */
 953 #define SOUND_MIXER_NONE        31
 954
 955 #define SOUND_DEVICE_LABELS     { \
 956         "Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
 957         "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
 958         "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
 959         "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
 960
 961 #define SOUND_DEVICE_NAMES      { \
 962         "vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
 963         "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
 964         "line1", "line2", "line3", "dig1", "dig2", "dig3", \
 965         "phin", "phout", "video", "radio", "monitor"}
 966
 967 /*      Device bitmask identifiers      */
 968
 969 #define SOUND_MIXER_RECSRC      0xff    /* 1 bit per recording source */
 970 #define SOUND_MIXER_DEVMASK     0xfe    /* 1 bit per supported device */
 971 #define SOUND_MIXER_RECMASK     0xfd    /* 1 bit per supp. recording source */
 972 #define SOUND_MIXER_CAPS        0xfc
 973 #define SOUND_CAP_EXCL_INPUT    0x00000001      /* Only 1 rec. src at a time */
 974 #define SOUND_MIXER_STEREODEVS  0xfb    /* Mixer channels supporting stereo */
 975
 976 /*      Device mask bits        */
 977
 978 #define SOUND_MASK_VOLUME       (1 << SOUND_MIXER_VOLUME)
 979 #define SOUND_MASK_BASS         (1 << SOUND_MIXER_BASS)
 980 #define SOUND_MASK_TREBLE       (1 << SOUND_MIXER_TREBLE)
 981 #define SOUND_MASK_SYNTH        (1 << SOUND_MIXER_SYNTH)
 982 #define SOUND_MASK_PCM          (1 << SOUND_MIXER_PCM)
 983 #define SOUND_MASK_SPEAKER      (1 << SOUND_MIXER_SPEAKER)
 984 #define SOUND_MASK_LINE         (1 << SOUND_MIXER_LINE)
 985 #define SOUND_MASK_MIC          (1 << SOUND_MIXER_MIC)
 986 #define SOUND_MASK_CD           (1 << SOUND_MIXER_CD)
 987 #define SOUND_MASK_IMIX         (1 << SOUND_MIXER_IMIX)
 988 #define SOUND_MASK_ALTPCM       (1 << SOUND_MIXER_ALTPCM)
 989 #define SOUND_MASK_RECLEV       (1 << SOUND_MIXER_RECLEV)
 990 #define SOUND_MASK_IGAIN        (1 << SOUND_MIXER_IGAIN)
 991 #define SOUND_MASK_OGAIN        (1 << SOUND_MIXER_OGAIN)
 992 #define SOUND_MASK_LINE1        (1 << SOUND_MIXER_LINE1)
 993 #define SOUND_MASK_LINE2        (1 << SOUND_MIXER_LINE2)
 994 #define SOUND_MASK_LINE3        (1 << SOUND_MIXER_LINE3)
 995 #define SOUND_MASK_DIGITAL1     (1 << SOUND_MIXER_DIGITAL1)
 996 #define SOUND_MASK_DIGITAL2     (1 << SOUND_MIXER_DIGITAL2)
 997 #define SOUND_MASK_DIGITAL3     (1 << SOUND_MIXER_DIGITAL3)
 998 #define SOUND_MASK_PHONEIN      (1 << SOUND_MIXER_PHONEIN)
 999 #define SOUND_MASK_PHONEOUT     (1 << SOUND_MIXER_PHONEOUT)
1000 #define SOUND_MASK_RADIO        (1 << SOUND_MIXER_RADIO)
1001 #define SOUND_MASK_VIDEO        (1 << SOUND_MIXER_VIDEO)
1002 #define SOUND_MASK_MONITOR      (1 << SOUND_MIXER_MONITOR)
1003
1004 /* Obsolete macros */
1005 #define SOUND_MASK_MUTE         (1 << SOUND_MIXER_MUTE)
1006 #define SOUND_MASK_ENHANCE      (1 << SOUND_MIXER_ENHANCE)
1007 #define SOUND_MASK_LOUD         (1 << SOUND_MIXER_LOUD)
1008
1009 #define MIXER_READ(dev)         _IOR('M', dev, int)
1010 #define SOUND_MIXER_READ_VOLUME         MIXER_READ(SOUND_MIXER_VOLUME)
1011 #define SOUND_MIXER_READ_BASS           MIXER_READ(SOUND_MIXER_BASS)
1012 #define SOUND_MIXER_READ_TREBLE         MIXER_READ(SOUND_MIXER_TREBLE)
1013 #define SOUND_MIXER_READ_SYNTH          MIXER_READ(SOUND_MIXER_SYNTH)
1014 #define SOUND_MIXER_READ_PCM            MIXER_READ(SOUND_MIXER_PCM)
1015 #define SOUND_MIXER_READ_SPEAKER        MIXER_READ(SOUND_MIXER_SPEAKER)
1016 #define SOUND_MIXER_READ_LINE           MIXER_READ(SOUND_MIXER_LINE)
1017 #define SOUND_MIXER_READ_MIC            MIXER_READ(SOUND_MIXER_MIC)
1018 #define SOUND_MIXER_READ_CD             MIXER_READ(SOUND_MIXER_CD)
1019 #define SOUND_MIXER_READ_IMIX           MIXER_READ(SOUND_MIXER_IMIX)
1020 #define SOUND_MIXER_READ_ALTPCM         MIXER_READ(SOUND_MIXER_ALTPCM)
1021 #define SOUND_MIXER_READ_RECLEV         MIXER_READ(SOUND_MIXER_RECLEV)
1022 #define SOUND_MIXER_READ_IGAIN          MIXER_READ(SOUND_MIXER_IGAIN)
1023 #define SOUND_MIXER_READ_OGAIN          MIXER_READ(SOUND_MIXER_OGAIN)
1024 #define SOUND_MIXER_READ_LINE1          MIXER_READ(SOUND_MIXER_LINE1)
1025 #define SOUND_MIXER_READ_LINE2          MIXER_READ(SOUND_MIXER_LINE2)
1026 #define SOUND_MIXER_READ_LINE3          MIXER_READ(SOUND_MIXER_LINE3)
1027
1028 /* Obsolete macros */
1029 #define SOUND_MIXER_READ_MUTE           MIXER_READ(SOUND_MIXER_MUTE)
1030 #define SOUND_MIXER_READ_ENHANCE        MIXER_READ(SOUND_MIXER_ENHANCE)
1031 #define SOUND_MIXER_READ_LOUD           MIXER_READ(SOUND_MIXER_LOUD)
1032
1033 #define SOUND_MIXER_READ_RECSRC         MIXER_READ(SOUND_MIXER_RECSRC)
1034 #define SOUND_MIXER_READ_DEVMASK        MIXER_READ(SOUND_MIXER_DEVMASK)
1035 #define SOUND_MIXER_READ_RECMASK        MIXER_READ(SOUND_MIXER_RECMASK)
1036 #define SOUND_MIXER_READ_STEREODEVS     MIXER_READ(SOUND_MIXER_STEREODEVS)
1037 #define SOUND_MIXER_READ_CAPS           MIXER_READ(SOUND_MIXER_CAPS)
1038
1039 #define MIXER_WRITE(dev)                _IOWR('M', dev, int)
1040 #define SOUND_MIXER_WRITE_VOLUME        MIXER_WRITE(SOUND_MIXER_VOLUME)
1041 #define SOUND_MIXER_WRITE_BASS          MIXER_WRITE(SOUND_MIXER_BASS)
1042 #define SOUND_MIXER_WRITE_TREBLE        MIXER_WRITE(SOUND_MIXER_TREBLE)
1043 #define SOUND_MIXER_WRITE_SYNTH         MIXER_WRITE(SOUND_MIXER_SYNTH)
1044 #define SOUND_MIXER_WRITE_PCM           MIXER_WRITE(SOUND_MIXER_PCM)
1045 #define SOUND_MIXER_WRITE_SPEAKER       MIXER_WRITE(SOUND_MIXER_SPEAKER)
1046 #define SOUND_MIXER_WRITE_LINE          MIXER_WRITE(SOUND_MIXER_LINE)
1047 #define SOUND_MIXER_WRITE_MIC           MIXER_WRITE(SOUND_MIXER_MIC)
1048 #define SOUND_MIXER_WRITE_CD            MIXER_WRITE(SOUND_MIXER_CD)
1049 #define SOUND_MIXER_WRITE_IMIX          MIXER_WRITE(SOUND_MIXER_IMIX)
1050 #define SOUND_MIXER_WRITE_ALTPCM        MIXER_WRITE(SOUND_MIXER_ALTPCM)
1051 #define SOUND_MIXER_WRITE_RECLEV        MIXER_WRITE(SOUND_MIXER_RECLEV)
1052 #define SOUND_MIXER_WRITE_IGAIN         MIXER_WRITE(SOUND_MIXER_IGAIN)
1053 #define SOUND_MIXER_WRITE_OGAIN         MIXER_WRITE(SOUND_MIXER_OGAIN)
1054 #define SOUND_MIXER_WRITE_LINE1         MIXER_WRITE(SOUND_MIXER_LINE1)
1055 #define SOUND_MIXER_WRITE_LINE2         MIXER_WRITE(SOUND_MIXER_LINE2)
1056 #define SOUND_MIXER_WRITE_LINE3         MIXER_WRITE(SOUND_MIXER_LINE3)
1057 #define SOUND_MIXER_WRITE_MUTE          MIXER_WRITE(SOUND_MIXER_MUTE)
1058 #define SOUND_MIXER_WRITE_ENHANCE       MIXER_WRITE(SOUND_MIXER_ENHANCE)
1059 #define SOUND_MIXER_WRITE_LOUD          MIXER_WRITE(SOUND_MIXER_LOUD)
1060
1061 #define SOUND_MIXER_WRITE_RECSRC        MIXER_WRITE(SOUND_MIXER_RECSRC)
1062
1063 #define LEFT_CHN        0
1064 #define RIGHT_CHN       1
1065
1066 /*
1067  * Level 2 event types for /dev/sequencer
1068  */
1069
1070 /*
1071  * The 4 most significant bits of byte 0 specify the class of
1072  * the event:
1073  *
1074  *      0x8X = system level events,
1075  *      0x9X = device/port specific events, event[1] = device/port,
1076  *              The last 4 bits give the subtype:
1077  *                      0x02    = Channel event (event[3] = chn).
1078  *                      0x01    = note event (event[4] = note).
1079  *                      (0x01 is not used alone but always with bit 0x02).
1080  *             event[2] = MIDI message code (0x80=note off etc.)
1081  *
1082  */
1083
1084 #define EV_SEQ_LOCAL            0x80
1085 #define EV_TIMING               0x81
1086 #define EV_CHN_COMMON           0x92
1087 #define EV_CHN_VOICE            0x93
1088 #define EV_SYSEX                0x94
1089 /*
1090  * Event types 200 to 220 are reserved for application use.
1091  * These numbers will not be used by the driver.
1092  */
1093
1094 /*
1095  * Events for event type EV_CHN_VOICE
1096  */
1097
1098 #define MIDI_NOTEOFF            0x80
1099 #define MIDI_NOTEON             0x90
1100 #define MIDI_KEY_PRESSURE       0xA0
1101
1102 /*
1103  * Events for event type EV_CHN_COMMON
1104  */
1105
1106 #define MIDI_CTL_CHANGE         0xB0
1107 #define MIDI_PGM_CHANGE         0xC0
1108 #define MIDI_CHN_PRESSURE       0xD0
1109 #define MIDI_PITCH_BEND         0xE0
1110
1111 #define MIDI_SYSTEM_PREFIX      0xF0
1112
1113 /*
1114  * Timer event types
1115  */
1116 #define TMR_WAIT_REL            1       /* Time relative to the prev time */
1117 #define TMR_WAIT_ABS            2       /* Absolute time since TMR_START */
1118 #define TMR_STOP                3
1119 #define TMR_START               4
1120 #define TMR_CONTINUE            5
1121 #define TMR_TEMPO               6
1122 #define TMR_ECHO                8
1123 #define TMR_CLOCK               9       /* MIDI clock */
1124 #define TMR_SPP                 10      /* Song position pointer */
1125 #define TMR_TIMESIG             11      /* Time signature */
1126
1127 /*
1128  *      Local event types
1129  */
1130 #define LOCL_STARTAUDIO         1
1131
1132 #if (!defined(_KERNEL) && !defined(INKERNEL)) || defined(USE_SEQ_MACROS)
1133 /*
1134  *      Some convenience macros to simplify programming of the
1135  *      /dev/sequencer interface
1136  *
1137  *      These macros define the API which should be used when possible.
1138  */
1139
1140 #ifndef USE_SIMPLE_MACROS
1141 void seqbuf_dump (void);        /* This function must be provided by programs */
1142
1143 /* Sample seqbuf_dump() implementation:
1144  *
1145  *      SEQ_DEFINEBUF (2048);   -- Defines a buffer for 2048 bytes
1146  *
1147  *      int seqfd;              -- The file descriptor for /dev/sequencer.
1148  *
1149  *      void
1150  *      seqbuf_dump ()
1151  *      {
1152  *        if (_seqbufptr)
1153  *          if (write (seqfd, _seqbuf, _seqbufptr) == -1)
1154  *            {
1155  *              perror ("write /dev/sequencer");
1156  *              exit (-1);
1157  *            }
1158  *        _seqbufptr = 0;
1159  *      }
1160  */
1161
1162 #define SEQ_DEFINEBUF(len)              \
1163         u_char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
1164 #define SEQ_USE_EXTBUF()                \
1165         extern u_char _seqbuf[]; \
1166         extern int _seqbuflen;extern int _seqbufptr
1167 #define SEQ_DECLAREBUF()                SEQ_USE_EXTBUF()
1168 #define SEQ_PM_DEFINES                  struct patmgr_info _pm_info
1169 #define _SEQ_NEEDBUF(len)               \
1170         if ((_seqbufptr+(len)) > _seqbuflen) \
1171                 seqbuf_dump()
1172 #define _SEQ_ADVBUF(len)                _seqbufptr += len
1173 #define SEQ_DUMPBUF                     seqbuf_dump
1174 #else
1175 /*
1176  * This variation of the sequencer macros is used just to format one event
1177  * using fixed buffer.
1178  *
1179  * The program using the macro library must define the following macros before
1180  * using this library.
1181  *
1182  * #define _seqbuf               name of the buffer (u_char[])
1183  * #define _SEQ_ADVBUF(len)      If the applic needs to know the exact
1184  *                               size of the event, this macro can be used.
1185  *                               Otherwise this must be defined as empty.
1186  * #define _seqbufptr            Define the name of index variable or 0 if
1187  *                               not required.
1188  */
1189 #define _SEQ_NEEDBUF(len)       /* empty */
1190 #endif
1191
1192 #define PM_LOAD_PATCH(dev, bank, pgm)   \
1193         (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \
1194         _pm_info.device=dev, _pm_info.data.data8[0]=pgm, \
1195         _pm_info.parm1 = bank, _pm_info.parm2 = 1, \
1196         ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info))
1197 #define PM_LOAD_PATCHES(dev, bank, pgm) \
1198         (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \
1199         _pm_info.device=dev, bcopy( pgm, _pm_info.data.data8,  128), \
1200         _pm_info.parm1 = bank, _pm_info.parm2 = 128, \
1201         ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info))
1202
1203 #define SEQ_VOLUME_MODE(dev, mode)      { \
1204         _SEQ_NEEDBUF(8);\
1205         _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
1206         _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
1207         _seqbuf[_seqbufptr+2] = (dev);\
1208         _seqbuf[_seqbufptr+3] = (mode);\
1209         _seqbuf[_seqbufptr+4] = 0;\
1210         _seqbuf[_seqbufptr+5] = 0;\
1211         _seqbuf[_seqbufptr+6] = 0;\
1212         _seqbuf[_seqbufptr+7] = 0;\
1213         _SEQ_ADVBUF(8);}
1214
1215 /*
1216  * Midi voice messages
1217  */
1218
1219 #define _CHN_VOICE(dev, event, chn, note, parm)  { \
1220         _SEQ_NEEDBUF(8);\
1221         _seqbuf[_seqbufptr] = EV_CHN_VOICE;\
1222         _seqbuf[_seqbufptr+1] = (dev);\
1223         _seqbuf[_seqbufptr+2] = (event);\
1224         _seqbuf[_seqbufptr+3] = (chn);\
1225         _seqbuf[_seqbufptr+4] = (note);\
1226         _seqbuf[_seqbufptr+5] = (parm);\
1227         _seqbuf[_seqbufptr+6] = (0);\
1228         _seqbuf[_seqbufptr+7] = 0;\
1229         _SEQ_ADVBUF(8);}
1230
1231 #define SEQ_START_NOTE(dev, chn, note, vol) \
1232                 _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
1233
1234 #define SEQ_STOP_NOTE(dev, chn, note, vol) \
1235                 _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
1236
1237 #define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
1238                 _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
1239
1240 /*
1241  * Midi channel messages
1242  */
1243
1244 #define _CHN_COMMON(dev, event, chn, p1, p2, w14) { \
1245         _SEQ_NEEDBUF(8);\
1246         _seqbuf[_seqbufptr] = EV_CHN_COMMON;\
1247         _seqbuf[_seqbufptr+1] = (dev);\
1248         _seqbuf[_seqbufptr+2] = (event);\
1249         _seqbuf[_seqbufptr+3] = (chn);\
1250         _seqbuf[_seqbufptr+4] = (p1);\
1251         _seqbuf[_seqbufptr+5] = (p2);\
1252         *(short *)&_seqbuf[_seqbufptr+6] = (w14);\
1253         _SEQ_ADVBUF(8);}
1254 /*
1255  * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
1256  * sending any MIDI bytes but it's absolutely not possible. Trying to do
1257  * so _will_ cause problems with MPU401 intelligent mode).
1258  *
1259  * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be
1260  * sent by calling SEQ_SYSEX() several times (there must be no other events
1261  * between them). First sysex fragment must have 0xf0 in the first byte
1262  * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
1263  * between these sysex start and end markers cannot be larger than 0x7f. Also
1264  * lengths of each fragments (except the last one) must be 6.
1265  *
1266  * Breaking the above rules may work with some MIDI ports but is likely to
1267  * cause fatal problems with some other devices (such as MPU401).
1268  */
1269 #define SEQ_SYSEX(dev, buf, len) { \
1270         int i, l=(len); if (l>6)l=6;\
1271         _SEQ_NEEDBUF(8);\
1272         _seqbuf[_seqbufptr] = EV_SYSEX;\
1273         for(i=0;i<l;i++)_seqbuf[_seqbufptr+i+1] = (buf)[i];\
1274         for(i=l;i<6;i++)_seqbuf[_seqbufptr+i+1] = 0xff;\
1275         _SEQ_ADVBUF(8);}
1276
1277 #define SEQ_CHN_PRESSURE(dev, chn, pressure) \
1278         _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
1279
1280 #define SEQ_SET_PATCH(dev, chn, patch) \
1281         _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
1282
1283 #define SEQ_CONTROL(dev, chn, controller, value) \
1284         _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
1285
1286 #define SEQ_BENDER(dev, chn, value) \
1287         _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
1288
1289
1290 #define SEQ_V2_X_CONTROL(dev, voice, controller, value) { \
1291         _SEQ_NEEDBUF(8);\
1292         _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
1293         _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
1294         _seqbuf[_seqbufptr+2] = (dev);\
1295         _seqbuf[_seqbufptr+3] = (voice);\
1296         _seqbuf[_seqbufptr+4] = (controller);\
1297         *(short *)&_seqbuf[_seqbufptr+5] = (value);\
1298         _seqbuf[_seqbufptr+7] = 0;\
1299         _SEQ_ADVBUF(8);}
1300
1301 /*
1302  * The following 5 macros are incorrectly implemented and obsolete.
1303  * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
1304  */
1305
1306 #define SEQ_PITCHBEND(dev, voice, value) \
1307         SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
1308 #define SEQ_BENDER_RANGE(dev, voice, value) \
1309         SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
1310 #define SEQ_EXPRESSION(dev, voice, value) \
1311         SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
1312 #define SEQ_MAIN_VOLUME(dev, voice, value) \
1313         SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
1314 #define SEQ_PANNING(dev, voice, pos) \
1315         SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
1316
1317 /*
1318  * Timing and syncronization macros
1319  */
1320
1321 #define _TIMER_EVENT(ev, parm)          { \
1322         _SEQ_NEEDBUF(8);\
1323         _seqbuf[_seqbufptr+0] = EV_TIMING; \
1324         _seqbuf[_seqbufptr+1] = (ev); \
1325         _seqbuf[_seqbufptr+2] = 0;\
1326         _seqbuf[_seqbufptr+3] = 0;\
1327         *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \
1328         _SEQ_ADVBUF(8); \
1329         }
1330
1331 #define SEQ_START_TIMER()               _TIMER_EVENT(TMR_START, 0)
1332 #define SEQ_STOP_TIMER()                _TIMER_EVENT(TMR_STOP, 0)
1333 #define SEQ_CONTINUE_TIMER()            _TIMER_EVENT(TMR_CONTINUE, 0)
1334 #define SEQ_WAIT_TIME(ticks)            _TIMER_EVENT(TMR_WAIT_ABS, ticks)
1335 #define SEQ_DELTA_TIME(ticks)           _TIMER_EVENT(TMR_WAIT_REL, ticks)
1336 #define SEQ_ECHO_BACK(key)              _TIMER_EVENT(TMR_ECHO, key)
1337 #define SEQ_SET_TEMPO(value)            _TIMER_EVENT(TMR_TEMPO, value)
1338 #define SEQ_SONGPOS(pos)                _TIMER_EVENT(TMR_SPP, pos)
1339 #define SEQ_TIME_SIGNATURE(sig)         _TIMER_EVENT(TMR_TIMESIG, sig)
1340
1341 /*
1342  * Local control events
1343  */
1344
1345 #define _LOCAL_EVENT(ev, parm)          { \
1346         _SEQ_NEEDBUF(8);\
1347         _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
1348         _seqbuf[_seqbufptr+1] = (ev); \
1349         _seqbuf[_seqbufptr+2] = 0;\
1350         _seqbuf[_seqbufptr+3] = 0;\
1351         *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \
1352         _SEQ_ADVBUF(8); \
1353         }
1354
1355 #define SEQ_PLAYAUDIO(devmask)          _LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
1356 /*
1357  * Events for the level 1 interface only
1358  */
1359
1360 #define SEQ_MIDIOUT(device, byte)       { \
1361         _SEQ_NEEDBUF(4);\
1362         _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
1363         _seqbuf[_seqbufptr+1] = (byte);\
1364         _seqbuf[_seqbufptr+2] = (device);\
1365         _seqbuf[_seqbufptr+3] = 0;\
1366         _SEQ_ADVBUF(4);}
1367
1368 /*
1369  * Patch loading.
1370  */
1371 #define SEQ_WRPATCH(patchx, len)        { \
1372         if (_seqbufptr) seqbuf_dump(); \
1373         if (write(seqfd, (char*)(patchx), len)==-1) \
1374            perror("Write patch: /dev/sequencer"); \
1375         }
1376
1377 #define SEQ_WRPATCH2(patchx, len)       \
1378         ( seqbuf_dump(), write(seqfd, (char*)(patchx), len) )
1379
1380 #endif
1381
1382 /*
1383  * Here I have moved all the aliases for ioctl names.
1384  */
1385
1386 #define SNDCTL_DSP_SAMPLESIZE   SNDCTL_DSP_SETFMT
1387 #define SOUND_PCM_WRITE_BITS    SNDCTL_DSP_SETFMT
1388 #define SOUND_PCM_SETFMT        SNDCTL_DSP_SETFMT
1389
1390 #define SOUND_PCM_WRITE_RATE    SNDCTL_DSP_SPEED
1391 #define SOUND_PCM_POST          SNDCTL_DSP_POST
1392 #define SOUND_PCM_RESET         SNDCTL_DSP_RESET
1393 #define SOUND_PCM_SYNC          SNDCTL_DSP_SYNC
1394 #define SOUND_PCM_SUBDIVIDE     SNDCTL_DSP_SUBDIVIDE
1395 #define SOUND_PCM_SETFRAGMENT   SNDCTL_DSP_SETFRAGMENT
1396 #define SOUND_PCM_GETFMTS       SNDCTL_DSP_GETFMTS
1397 #define SOUND_PCM_GETOSPACE     SNDCTL_DSP_GETOSPACE
1398 #define SOUND_PCM_GETISPACE     SNDCTL_DSP_GETISPACE
1399 #define SOUND_PCM_NONBLOCK      SNDCTL_DSP_NONBLOCK
1400 #define SOUND_PCM_GETCAPS       SNDCTL_DSP_GETCAPS
1401 #define SOUND_PCM_GETTRIGGER    SNDCTL_DSP_GETTRIGGER
1402 #define SOUND_PCM_SETTRIGGER    SNDCTL_DSP_SETTRIGGER
1403 #define SOUND_PCM_SETSYNCRO     SNDCTL_DSP_SETSYNCRO
1404 #define SOUND_PCM_GETIPTR       SNDCTL_DSP_GETIPTR
1405 #define SOUND_PCM_GETOPTR       SNDCTL_DSP_GETOPTR
1406 #define SOUND_PCM_MAPINBUF      SNDCTL_DSP_MAPINBUF
1407 #define SOUND_PCM_MAPOUTBUF     SNDCTL_DSP_MAPOUTBUF
1408
1409 #endif  /* !_SYS_SOUNDCARD_H_ */