Remove some emacs variable settings.

[dragonfly.git] / sys / dev / raid / vinum / vinuminterrupt.c

/* vinuminterrupt.c: bottom half of the driver */

/*-
 * Copyright (c) 1997, 1998, 1999
 *      Nan Yang Computer Services Limited.  All rights reserved.
 *
 *  Parts copyright (c) 1997, 1998 Cybernet Corporation, NetMAX project.
 *
 *  Written by Greg Lehey
 *
 *  This software is distributed under the so-called ``Berkeley
 *  License'':
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Nan Yang Computer
 *      Services Limited.
 * 4. Neither the name of the Company nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * This software is provided ``as is'', and any express or implied
 * warranties, including, but not limited to, the implied warranties of
 * merchantability and fitness for a particular purpose are disclaimed.
 * In no event shall the company or contributors be liable for any
 * direct, indirect, incidental, special, exemplary, or consequential
 * damages (including, but not limited to, procurement of substitute
 * goods or services; loss of use, data, or profits; or business
 * interruption) however caused and on any theory of liability, whether
 * in contract, strict liability, or tort (including negligence or
 * otherwise) arising in any way out of the use of this software, even if
 * advised of the possibility of such damage.
 *
 * $Id: vinuminterrupt.c,v 1.12 2000/11/24 03:41:42 grog Exp grog $
 * $FreeBSD: src/sys/dev/vinum/vinuminterrupt.c,v 1.25.2.3 2001/05/28 05:56:27 grog Exp $
 */

#include "vinumhdr.h"
#include "request.h"
#include <sys/resourcevar.h>

void complete_raid5_write(struct rqelement *);
void complete_rqe(struct bio *bio);
void sdio_done(struct bio *bio);

/*
 * Take a completed buffer, transfer the data back if
 * it's a read, and complete the high-level request
 * if this is the last subrequest.
 *
 * The bp parameter is in fact a struct rqelement, which
 * includes a couple of extras at the end.
 */
void
complete_rqe(struct bio *bio)
{
    union daemoninfo di;
    struct buf *bp = bio->bio_buf;
    struct rqelement *rqe;
    struct request *rq;
    struct rqgroup *rqg;
    struct bio *ubio;                                       /* user buffer */
    struct drive *drive;
    struct sd *sd;
    char *gravity;                                          /* for error messages */

    get_mplock();

    rqe = (struct rqelement *) bp;                          /* point to the element that completed */
    rqg = rqe->rqg;                                         /* and the request group */
    rq = rqg->rq;                                           /* and the complete request */
    ubio = rq->bio;                                         /* user buffer */

#ifdef VINUMDEBUG
    if (debug & DEBUG_LASTREQS)
        logrq(loginfo_iodone, (union rqinfou) rqe, ubio);
#endif
    drive = &DRIVE[rqe->driveno];
    drive->active--;                                        /* one less outstanding I/O on this drive */
    vinum_conf.active--;                                    /* one less outstanding I/O globally */
    if ((drive->active == (DRIVE_MAXACTIVE - 1))            /* we were at the drive limit */
    ||(vinum_conf.active == VINUM_MAXACTIVE))               /* or the global limit */
        wakeup(&launch_requests);                           /* let another one at it */
    if ((bp->b_flags & B_ERROR) != 0) {                     /* transfer in error */
        gravity = "";
        sd = &SD[rqe->sdno];

        if (bp->b_error != 0)                               /* did it return a number? */
            rq->error = bp->b_error;                        /* yes, put it in. */
        else if (rq->error == 0)                            /* no: do we have one already? */
            rq->error = EIO;                                /* no: catchall "I/O error" */
        sd->lasterror = rq->error;
        if (bp->b_cmd == BUF_CMD_READ) {
            if ((rq->error == ENXIO) || (sd->flags & VF_RETRYERRORS) == 0) {
                gravity = " fatal";
                set_sd_state(rqe->sdno, sd_crashed, setstate_force); /* subdisk is crashed */
            }
            log(LOG_ERR,
                "%s:%s read error, offset %lld for %d bytes\n",
                gravity,
                sd->name,
                (long long)bio->bio_offset,
                bp->b_bcount);
        } else {                                            /* write operation */
            if ((rq->error == ENXIO) || (sd->flags & VF_RETRYERRORS) == 0) {
                gravity = "fatal ";
                set_sd_state(rqe->sdno, sd_stale, setstate_force); /* subdisk is stale */
            }
            log(LOG_ERR,
                "%s:%s write error, offset %lld for %d bytes\n",
                gravity,
                sd->name,
                (long long)bio->bio_offset,
                bp->b_bcount);
        }
        log(LOG_ERR,
            "%s: user buffer offset %lld for %d bytes\n",
            sd->name,
            (long long)ubio->bio_offset,
            ubio->bio_buf->b_bcount);
        if (rq->error == ENXIO) {                           /* the drive's down too */
            log(LOG_ERR,
                "%s: fatal drive I/O error, offset %lld for %d bytes\n",
                DRIVE[rqe->driveno].label.name,
                (long long)bio->bio_offset,
                bp->b_bcount);
            DRIVE[rqe->driveno].lasterror = rq->error;
            set_drive_state(rqe->driveno,                   /* take the drive down */
                drive_down,
                setstate_force);
        }
    }
    /* Now update the statistics */
    if (bp->b_cmd == BUF_CMD_READ) {                            /* read operation */
        DRIVE[rqe->driveno].reads++;
        DRIVE[rqe->driveno].bytes_read += bp->b_bcount;
        SD[rqe->sdno].reads++;
        SD[rqe->sdno].bytes_read += bp->b_bcount;
        PLEX[rqe->rqg->plexno].reads++;
        PLEX[rqe->rqg->plexno].bytes_read += bp->b_bcount;
        if (PLEX[rqe->rqg->plexno].volno >= 0) {            /* volume I/O, not plex */
            VOL[PLEX[rqe->rqg->plexno].volno].reads++;
            VOL[PLEX[rqe->rqg->plexno].volno].bytes_read += bp->b_bcount;
        }
    } else {                                                /* write operation */
        DRIVE[rqe->driveno].writes++;
        DRIVE[rqe->driveno].bytes_written += bp->b_bcount;
        SD[rqe->sdno].writes++;
        SD[rqe->sdno].bytes_written += bp->b_bcount;
        PLEX[rqe->rqg->plexno].writes++;
        PLEX[rqe->rqg->plexno].bytes_written += bp->b_bcount;
        if (PLEX[rqe->rqg->plexno].volno >= 0) {            /* volume I/O, not plex */
            VOL[PLEX[rqe->rqg->plexno].volno].writes++;
            VOL[PLEX[rqe->rqg->plexno].volno].bytes_written += bp->b_bcount;
        }
    }
    if (rqg->flags & XFR_RECOVERY_READ) {                   /* recovery read, */
        int *sdata;                                         /* source */
        int *data;                                          /* and group data */
        int length;                                         /* and count involved */
        int count;                                          /* loop counter */
        struct rqelement *urqe = &rqg->rqe[rqg->badsdno];   /* rqe of the bad subdisk */

        /* XOR destination is the user data */
        sdata = (int *) &rqe->b.b_data[rqe->groupoffset << DEV_BSHIFT]; /* old data contents */
        data = (int *) &urqe->b.b_data[urqe->groupoffset << DEV_BSHIFT]; /* destination */
        length = urqe->grouplen * (DEV_BSIZE / sizeof(int)); /* and number of ints */

        for (count = 0; count < length; count++)
            data[count] ^= sdata[count];

        /*
         * In a normal read, we will normally read directly
         * into the user buffer.  This doesn't work if
         * we're also doing a recovery, so we have to
         * copy it
         */
        if (rqe->flags & XFR_NORMAL_READ) {                 /* normal read as well, */
            char *src = &rqe->b.b_data[rqe->dataoffset << DEV_BSHIFT]; /* read data is here */
            char *dst;

            dst = (char *) ubio->bio_buf->b_data + (rqe->useroffset << DEV_BSHIFT); /* where to put it in user buffer */
            length = rqe->datalen << DEV_BSHIFT;            /* and count involved */
            bcopy(src, dst, length);                        /* move it */
        }
    } else if ((rqg->flags & (XFR_NORMAL_WRITE | XFR_DEGRADED_WRITE)) /* RAID 4/5 group write operation  */
    &&(rqg->active == 1))                                   /* and this is the last active request */
        complete_raid5_write(rqe);
    /*
     * This is the earliest place where we can be
     * sure that the request has really finished,
     * since complete_raid5_write can issue new
     * requests.
     */
    rqg->active--;                                          /* this request now finished */
    if (rqg->active == 0) {                                 /* request group finished, */
        rq->active--;                                       /* one less */
        if (rqg->lock) {                                    /* got a lock? */
            unlockrange(rqg->plexno, rqg->lock);            /* yes, free it */
            rqg->lock = 0;
        }
    }
    if (rq->active == 0) {                                  /* request finished, */
#ifdef VINUMDEBUG
        if (debug & DEBUG_RESID) {
            if (ubio->bio_buf->b_resid != 0)                        /* still something to transfer? */
                Debugger("resid");
        }
#endif

        if (rq->error) {                                    /* did we have an error? */
            if (rq->isplex) {                               /* plex operation, */
                ubio->bio_buf->b_flags |= B_ERROR;          /* yes, propagate to user */
                ubio->bio_buf->b_error = rq->error;
            } else {                                        /* try to recover */
                di.rq = rq;
                queue_daemon_request(daemonrq_ioerror, di); /* let the daemon complete */
            }
        } else {
            ubio->bio_buf->b_resid = 0;                     /* completed our transfer */
            if (rq->isplex == 0)                            /* volume request, */
                VOL[rq->volplex.volno].active--;            /* another request finished */
            biodone(ubio);                                  /* top level buffer completed */
            freerq(rq);                                     /* return the request storage */
        }
    }
    rel_mplock();
}

/* Free a request block and anything hanging off it */
void
freerq(struct request *rq)
{
    struct rqgroup *rqg;
    struct rqgroup *nrqg;                                   /* next in chain */
    int rqno;

    for (rqg = rq->rqg; rqg != NULL; rqg = nrqg) {          /* through the whole request chain */
        if (rqg->lock)                                      /* got a lock? */
            unlockrange(rqg->plexno, rqg->lock);            /* yes, free it */
        for (rqno = 0; rqno < rqg->count; rqno++) {
            if ((rqg->rqe[rqno].flags & XFR_MALLOCED)       /* data buffer was malloced, */
            &&rqg->rqe[rqno].b.b_data)                      /* and the allocation succeeded */
                Free(rqg->rqe[rqno].b.b_data);              /* free it */
            if (rqg->rqe[rqno].flags & XFR_BUFLOCKED) {     /* locked this buffer, */
                BUF_UNLOCK(&rqg->rqe[rqno].b);              /* unlock it again */
                uninitbufbio(&rqg->rqe[rqno].b);
            }
        }
        nrqg = rqg->next;                                   /* note the next one */
        Free(rqg);                                          /* and free this one */
    }
    Free(rq);                                               /* free the request itself */
}

/* I/O on subdisk completed */
void
sdio_done(struct bio *bio)
{
    struct sdbuf *sbp;

    get_mplock();

    sbp = (struct sdbuf *) bio->bio_buf;
    if (sbp->b.b_flags & B_ERROR) {                         /* had an error */
        sbp->bio->bio_buf->b_flags |= B_ERROR;                      /* propagate upwards */
        sbp->bio->bio_buf->b_error = sbp->b.b_error;
    }
#ifdef VINUMDEBUG
    if (debug & DEBUG_LASTREQS)
        logrq(loginfo_sdiodone, (union rqinfou)bio, bio);
#endif
    sbp->bio->bio_buf->b_resid = sbp->b.b_resid;                            /* copy the resid field */
    /* Now update the statistics */
    if (sbp->b.b_cmd == BUF_CMD_READ) {                     /* read operation */
        DRIVE[sbp->driveno].reads++;
        DRIVE[sbp->driveno].bytes_read += sbp->b.b_bcount;
        SD[sbp->sdno].reads++;
        SD[sbp->sdno].bytes_read += sbp->b.b_bcount;
    } else {                                                /* write operation */
        DRIVE[sbp->driveno].writes++;
        DRIVE[sbp->driveno].bytes_written += sbp->b.b_bcount;
        SD[sbp->sdno].writes++;
        SD[sbp->sdno].bytes_written += sbp->b.b_bcount;
    }
    biodone_sync(bio);
    biodone(sbp->bio);                                      /* complete the caller's I/O */
    BUF_UNLOCK(&sbp->b);
    uninitbufbio(&sbp->b);
    Free(sbp);
    rel_mplock();
}

/* Start the second phase of a RAID-4 or RAID-5 group write operation. */
void
complete_raid5_write(struct rqelement *rqe)
{
    int *sdata;                                             /* source */
    int *pdata;                                             /* and parity block data */
    int length;                                             /* and count involved */
    int count;                                              /* loop counter */
    int rqno;                                               /* request index */
    int rqoffset;                                           /* offset of request data from parity data */
    struct bio *ubio;                                       /* user buffer header */
    struct request *rq;                                     /* pointer to our request */
    struct rqgroup *rqg;                                    /* and to the request group */
    struct rqelement *prqe;                                 /* point to the parity block */
    struct drive *drive;                                    /* drive to access */
    rqg = rqe->rqg;                                         /* and to our request group */
    rq = rqg->rq;                                           /* point to our request */
    ubio = rq->bio;                                         /* user's buffer header */
    prqe = &rqg->rqe[0];                                    /* point to the parity block */

    /*
     * If we get to this function, we have normal or
     * degraded writes, or a combination of both.  We do
     * the same thing in each case: we perform an
     * exclusive or to the parity block.  The only
     * difference is the origin of the data and the
     * address range.
     */
    if (rqe->flags & XFR_DEGRADED_WRITE) {                  /* do the degraded write stuff */
        pdata = (int *) (&prqe->b.b_data[(prqe->groupoffset) << DEV_BSHIFT]); /* parity data pointer */
        bzero(pdata, prqe->grouplen << DEV_BSHIFT);         /* start with nothing in the parity block */

        /* Now get what data we need from each block */
        for (rqno = 1; rqno < rqg->count; rqno++) {         /* for all the data blocks */
            rqe = &rqg->rqe[rqno];                          /* this request */
            sdata = (int *) (&rqe->b.b_data[rqe->groupoffset << DEV_BSHIFT]); /* old data */
            length = rqe->grouplen << (DEV_BSHIFT - 2);     /* and count involved */

            /*
             * Add the data block to the parity block.  Before
             * we started the request, we zeroed the parity
             * block, so the result of adding all the other
             * blocks and the block we want to write will be
             * the correct parity block.
             */
            for (count = 0; count < length; count++)
                pdata[count] ^= sdata[count];
            if ((rqe->flags & XFR_MALLOCED)                 /* the buffer was malloced, */
            &&((rqg->flags & XFR_NORMAL_WRITE) == 0)) {     /* and we have no normal write, */
                Free(rqe->b.b_data);                        /* free it now */
                rqe->flags &= ~XFR_MALLOCED;
            }
        }
    }
    if (rqg->flags & XFR_NORMAL_WRITE) {                    /* do normal write stuff */
        /* Get what data we need from each block */
        for (rqno = 1; rqno < rqg->count; rqno++) {         /* for all the data blocks */
            rqe = &rqg->rqe[rqno];                          /* this request */
            if ((rqe->flags & (XFR_DATA_BLOCK | XFR_BAD_SUBDISK | XFR_NORMAL_WRITE))
                == (XFR_DATA_BLOCK | XFR_NORMAL_WRITE)) {   /* good data block to write */
                sdata = (int *) &rqe->b.b_data[rqe->dataoffset << DEV_BSHIFT]; /* old data contents */
                rqoffset = rqe->dataoffset + rqe->sdoffset - prqe->sdoffset; /* corresponding parity block offset */
                pdata = (int *) (&prqe->b.b_data[rqoffset << DEV_BSHIFT]); /* parity data pointer */
                length = rqe->datalen * (DEV_BSIZE / sizeof(int)); /* and number of ints */

                /*
                 * "remove" the old data block
                 * from the parity block
                 */
                if ((pdata < ((int *) prqe->b.b_data))
                    || (&pdata[length] > ((int *) (prqe->b.b_data + prqe->b.b_bcount)))
                    || (sdata < ((int *) rqe->b.b_data))
                    || (&sdata[length] > ((int *) (rqe->b.b_data + rqe->b.b_bcount))))
                    panic("complete_raid5_write: bounds overflow");
                for (count = 0; count < length; count++)
                    pdata[count] ^= sdata[count];

                /* "add" the new data block */
                sdata = (int *) (&ubio->bio_buf->b_data[rqe->useroffset << DEV_BSHIFT]); /* new data */
                if ((sdata < ((int *) ubio->bio_buf->b_data))
                    || (&sdata[length] > ((int *) (ubio->bio_buf->b_data + ubio->bio_buf->b_bcount))))
                    panic("complete_raid5_write: bounds overflow");
                for (count = 0; count < length; count++)
                    pdata[count] ^= sdata[count];

                /* Free the malloced buffer */
                if (rqe->flags & XFR_MALLOCED) {            /* the buffer was malloced, */
                    Free(rqe->b.b_data);                    /* free it */
                    rqe->flags &= ~XFR_MALLOCED;
                } else
                    panic("complete_raid5_write: malloc conflict");

                if ((rqe->b.b_cmd == BUF_CMD_READ)          /* this was a read */
                &&((rqe->flags & XFR_BAD_SUBDISK) == 0)) {  /* and we can write this block */
                    rqe->b.b_cmd = BUF_CMD_WRITE;   /* we're writing now */
                    rqe->b.b_bio1.bio_done = complete_rqe;          /* by calling us here */
                    rqe->flags &= ~XFR_PARITYOP;            /* reset flags that brought us here */
                    rqe->b.b_data = &ubio->bio_buf->b_data[rqe->useroffset << DEV_BSHIFT]; /* point to the user data */
                    rqe->b.b_bcount = rqe->datalen << DEV_BSHIFT; /* length to write */
                    rqe->b.b_resid = rqe->b.b_bcount;       /* nothing transferred */
                    rqe->b.b_bio1.bio_offset += (off_t)rqe->dataoffset << DEV_BSHIFT;       /* point to the correct block */
                    drive = &DRIVE[rqe->driveno];           /* drive to access */
                    rqe->b.b_bio1.bio_driver_info = drive->dev;
                    rqg->active++;                          /* another active request */

                                                            /* We can't sleep here, so we just increment the counters. */
                    drive->active++;
                    if (drive->active >= drive->maxactive)
                        drive->maxactive = drive->active;
                    vinum_conf.active++;
                    if (vinum_conf.active >= vinum_conf.maxactive)
                        vinum_conf.maxactive = vinum_conf.active;
#if VINUMDEBUG
                    if (debug & DEBUG_ADDRESSES)
                        log(LOG_DEBUG,
                            "  %s dev %s, sd %d, offset 0x%llx, devoffset 0x%llx, length %d\n",
                            (rqe->b.b_cmd == BUF_CMD_READ) ? "Read" : "Write",
                            drive->devicename,
                            rqe->sdno,
                            rqe->b.b_bio1.bio_offset - ((off_t)SD[rqe->sdno].driveoffset << DEV_BSHIFT),
                            rqe->b.b_bio1.bio_offset,
                            rqe->b.b_bcount);
                    if (debug & DEBUG_LASTREQS)
                        logrq(loginfo_raid5_data, (union rqinfou) rqe, ubio);
#endif
                    vn_strategy(drive->vp, &rqe->b.b_bio1);
                }
            }
        }
    }
    /* Finally, write the parity block */
    rqe = &rqg->rqe[0];
    rqe->b.b_cmd = BUF_CMD_WRITE;                   /* we're writing now */
    rqe->b.b_bio1.bio_done = complete_rqe;                          /* by calling us here */
    rqg->flags &= ~XFR_PARITYOP;                            /* reset flags that brought us here */
    rqe->b.b_bcount = rqe->buflen << DEV_BSHIFT;            /* length to write */
    rqe->b.b_resid = rqe->b.b_bcount;                       /* nothing transferred */
    drive = &DRIVE[rqe->driveno];                           /* drive to access */
    rqe->b.b_bio1.bio_driver_info = drive->dev;
    rqg->active++;                                          /* another active request */

    /* We can't sleep here, so we just increment the counters. */
    drive->active++;
    if (drive->active >= drive->maxactive)
        drive->maxactive = drive->active;
    vinum_conf.active++;
    if (vinum_conf.active >= vinum_conf.maxactive)
        vinum_conf.maxactive = vinum_conf.active;

#if VINUMDEBUG
    if (debug & DEBUG_ADDRESSES)
        log(LOG_DEBUG,
            "  %s dev %s, sd %d, offset 0x%llx, devoffset 0x%llx, length %d\n",
            (rqe->b.b_cmd == BUF_CMD_READ) ? "Read" : "Write",
            drive->devicename,
            rqe->sdno,
            rqe->b.b_bio1.bio_offset - ((off_t)SD[rqe->sdno].driveoffset << DEV_BSHIFT),
            rqe->b.b_bio1.bio_offset,
            rqe->b.b_bcount);
    if (debug & DEBUG_LASTREQS)
        logrq(loginfo_raid5_parity, (union rqinfou) rqe, ubio);
#endif
    vn_strategy(drive->vp, &rqe->b.b_bio1);
}