Zero out the start of the disk.
[dragonfly.git] / sys / netinet6 / udp6_output.c
blob63be39d0ceb02b46016d8ebabe8b7f73323197c8
1 /* $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $ */
2 /* $DragonFly: src/sys/netinet6/udp6_output.c,v 1.9 2008/09/04 09:08:22 hasso Exp $ */
3 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
5 /*
6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7 * All rights reserved.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
35 * Copyright (c) 1982, 1986, 1989, 1993
36 * The Regents of the University of California. All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the University of
49 * California, Berkeley and its contributors.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64 * SUCH DAMAGE.
66 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/priv.h>
85 #include <sys/syslog.h>
87 #include <net/if.h>
88 #include <net/route.h>
89 #include <net/if_types.h>
91 #include <netinet/in.h>
92 #include <netinet/in_var.h>
93 #include <netinet/in_systm.h>
94 #include <netinet/ip.h>
95 #include <netinet/ip_var.h>
96 #include <netinet/in_pcb.h>
97 #include <netinet/udp.h>
98 #include <netinet/udp_var.h>
99 #include <netinet/ip6.h>
100 #include <netinet6/ip6_var.h>
101 #include <netinet6/in6_pcb.h>
102 #include <netinet6/udp6_var.h>
103 #include <netinet/icmp6.h>
104 #include <netinet6/ip6protosw.h>
106 #ifdef IPSEC
107 #include <netinet6/ipsec.h>
108 #ifdef INET6
109 #include <netinet6/ipsec6.h>
110 #endif
111 #endif /* IPSEC */
113 #include <net/net_osdep.h>
116 * UDP protocol inplementation.
117 * Per RFC 768, August, 1980.
120 #define in6pcb inpcb
121 #define udp6stat udpstat
122 #define udp6s_opackets udps_opackets
125 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
126 struct mbuf *control, struct thread *td)
128 u_int32_t ulen = m->m_pkthdr.len;
129 u_int32_t plen = sizeof(struct udphdr) + ulen;
130 struct ip6_hdr *ip6;
131 struct udphdr *udp6;
132 struct in6_addr *laddr, *faddr;
133 u_short fport;
134 int error = 0;
135 struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
136 int priv;
137 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
138 int flags;
139 struct sockaddr_in6 tmp;
141 priv = !priv_check(td, PRIV_ROOT); /* 1 if privileged, 0 if not */
142 if (control) {
143 if ((error = ip6_setpktoptions(control, &opt,
144 in6p->in6p_outputopts,
145 IPPROTO_UDP, priv)) != 0)
146 goto release;
147 in6p->in6p_outputopts = &opt;
150 if (addr6) {
152 * IPv4 version of udp_output calls in_pcbconnect in this case,
153 * which needs splnet and affects performance.
154 * Since we saw no essential reason for calling in_pcbconnect,
155 * we get rid of such kind of logic, and call in6_selectsrc
156 * and in6_pcbsetport in order to fill in the local address
157 * and the local port.
159 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
160 if (sin6->sin6_port == 0) {
161 error = EADDRNOTAVAIL;
162 goto release;
165 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
166 /* how about ::ffff:0.0.0.0 case? */
167 error = EISCONN;
168 goto release;
170 if (!prison_remote_ip(td, (struct sockaddr *)addr6)) {
171 error = EAFNOSUPPORT; /* IPv4 only jail */
172 goto release;
175 /* protect *sin6 from overwrites */
176 tmp = *sin6;
177 sin6 = &tmp;
179 faddr = &sin6->sin6_addr;
180 fport = sin6->sin6_port; /* allow 0 port */
182 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
183 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
185 * I believe we should explicitly discard the
186 * packet when mapped addresses are disabled,
187 * rather than send the packet as an IPv6 one.
188 * If we chose the latter approach, the packet
189 * might be sent out on the wire based on the
190 * default route, the situation which we'd
191 * probably want to avoid.
192 * (20010421 jinmei@kame.net)
194 error = EINVAL;
195 goto release;
196 } else
197 af = AF_INET;
200 /* KAME hack: embed scopeid */
201 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
202 error = EINVAL;
203 goto release;
206 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
207 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
208 in6p->in6p_moptions,
209 &in6p->in6p_route,
210 &in6p->in6p_laddr, &error, NULL);
211 } else
212 laddr = &in6p->in6p_laddr; /* XXX */
213 if (laddr == NULL) {
214 if (error == 0)
215 error = EADDRNOTAVAIL;
216 goto release;
218 if (in6p->in6p_lport == 0 &&
219 (error = in6_pcbsetport(laddr, in6p, td)) != 0)
220 goto release;
221 } else {
222 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
223 error = ENOTCONN;
224 goto release;
226 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
227 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
229 * XXX: this case would happen when the
230 * application sets the V6ONLY flag after
231 * connecting the foreign address.
232 * Such applications should be fixed,
233 * so we bark here.
235 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
236 "option was set for a connected socket\n");
237 error = EINVAL;
238 goto release;
239 } else
240 af = AF_INET;
242 laddr = &in6p->in6p_laddr;
243 faddr = &in6p->in6p_faddr;
244 fport = in6p->in6p_fport;
247 if (af == AF_INET)
248 hlen = sizeof(struct ip);
251 * Calculate data length and get a mbuf
252 * for UDP and IP6 headers.
254 M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
255 if (m == 0) {
256 error = ENOBUFS;
257 goto release;
261 * Stuff checksum and output datagram.
263 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
264 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
265 udp6->uh_dport = fport;
266 if (plen <= 0xffff)
267 udp6->uh_ulen = htons((u_short)plen);
268 else
269 udp6->uh_ulen = 0;
270 udp6->uh_sum = 0;
272 switch (af) {
273 case AF_INET6:
274 ip6 = mtod(m, struct ip6_hdr *);
275 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
276 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
277 ip6->ip6_vfc |= IPV6_VERSION;
278 #if 0 /* ip6_plen will be filled in ip6_output. */
279 ip6->ip6_plen = htons((u_short)plen);
280 #endif
281 ip6->ip6_nxt = IPPROTO_UDP;
282 ip6->ip6_hlim = in6_selecthlim(in6p,
283 in6p->in6p_route.ro_rt ?
284 in6p->in6p_route.ro_rt->rt_ifp : NULL);
285 ip6->ip6_src = *laddr;
286 ip6->ip6_dst = *faddr;
288 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
289 sizeof(struct ip6_hdr), plen)) == 0) {
290 udp6->uh_sum = 0xffff;
293 flags = 0;
295 udp6stat.udp6s_opackets++;
296 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
297 flags, in6p->in6p_moptions, NULL, in6p);
298 break;
299 case AF_INET:
300 error = EAFNOSUPPORT;
301 goto release;
303 goto releaseopt;
305 release:
306 m_freem(m);
308 releaseopt:
309 if (control) {
310 ip6_clearpktopts(in6p->in6p_outputopts, -1);
311 in6p->in6p_outputopts = stickyopt;
312 m_freem(control);
314 return (error);