dma: defer delivery if STARTTLS fails
[dragonfly.git] / bin / dd / dd.c
blob50ca08c634864741d1c0ac43cefbeda96394a776
1 /*-
2 * Copyright (c) 1991, 1993, 1994
3 * The Regents of the University of California. All rights reserved.
5 * This code is derived from software contributed to Berkeley by
6 * Keith Muller of the University of California, San Diego and Lance
7 * Visser of Convex Computer Corporation.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
33 * @(#) Copyright (c) 1991, 1993, 1994 The Regents of the University of California. All rights reserved.
34 * @(#)dd.c 8.5 (Berkeley) 4/2/94
35 * $FreeBSD: src/bin/dd/dd.c,v 1.27.2.3 2001/08/01 01:37:35 obrien Exp $
36 * $DragonFly: src/bin/dd/dd.c,v 1.9 2008/01/28 16:08:02 matthias Exp $
39 #include <sys/param.h>
40 #include <sys/stat.h>
41 #include <sys/conf.h>
42 #include <sys/device.h>
43 #include <sys/filio.h>
44 #include <sys/time.h>
46 #include <ctype.h>
47 #include <err.h>
48 #include <errno.h>
49 #include <fcntl.h>
50 #include <locale.h>
51 #include <stdio.h>
52 #include <stdlib.h>
53 #include <string.h>
54 #include <unistd.h>
56 #include "dd.h"
57 #include "extern.h"
59 static void dd_close (void);
60 static void dd_in (void);
61 int main (int, char *[]);
62 static void getfdtype (IO *);
63 static void setup (void);
65 IO in, out; /* input/output state */
66 STAT st; /* statistics */
67 void (*cfunc) (void); /* conversion function */
68 quad_t cpy_cnt; /* # of blocks to copy */
69 off_t pending = 0; /* pending seek if sparse */
70 u_int ddflags; /* conversion options */
71 size_t cbsz; /* conversion block size */
72 quad_t files_cnt = 1; /* # of files to copy */
73 const u_char *ctab; /* conversion table */
75 int
76 main(int argc __unused, char **argv)
78 setlocale(LC_CTYPE, "");
79 jcl(argv);
80 setup();
82 signal(SIGINFO, summaryx);
83 signal(SIGINT, terminate);
85 atexit(summary);
87 while (files_cnt--)
88 dd_in();
90 dd_close();
91 exit(0);
94 static void
95 setup(void)
97 u_int cnt;
98 struct timeval tv;
100 if (in.name == NULL) {
101 in.name = "stdin";
102 in.fd = STDIN_FILENO;
103 } else {
104 in.fd = open(in.name, O_RDONLY, 0);
105 if (in.fd == -1)
106 err(1, "%s", in.name);
109 getfdtype(&in);
111 if (files_cnt > 1 && !(in.flags & ISTAPE))
112 errx(1, "files is not supported for non-tape devices");
114 if (out.name == NULL) {
115 /* No way to check for read access here. */
116 out.fd = STDOUT_FILENO;
117 out.name = "stdout";
118 } else {
119 #define OFLAGS \
120 (O_CREAT | (ddflags & (C_SEEK | C_NOTRUNC) ? 0 : O_TRUNC))
121 out.fd = open(out.name, O_RDWR | OFLAGS, DEFFILEMODE);
123 * May not have read access, so try again with write only.
124 * Without read we may have a problem if output also does
125 * not support seeks.
127 if (out.fd == -1) {
128 out.fd = open(out.name, O_WRONLY | OFLAGS, DEFFILEMODE);
129 out.flags |= NOREAD;
131 if (out.fd == -1)
132 err(1, "%s", out.name);
135 getfdtype(&out);
138 * Allocate space for the input and output buffers. If not doing
139 * record oriented I/O, only need a single buffer.
141 if (!(ddflags & (C_BLOCK | C_UNBLOCK))) {
142 if ((in.db = malloc(out.dbsz + in.dbsz - 1)) == NULL)
143 err(1, "input buffer");
144 out.db = in.db;
145 } else if ((in.db = malloc(MAX(in.dbsz, cbsz) + cbsz)) == NULL ||
146 (out.db = malloc(out.dbsz + cbsz)) == NULL)
147 err(1, "output buffer");
148 in.dbp = in.db;
149 out.dbp = out.db;
151 /* Position the input/output streams. */
152 if (in.offset)
153 pos_in();
154 if (out.offset)
155 pos_out();
158 * Truncate the output file. If it fails on a type of output file
159 * that it should _not_ fail on, error out.
161 if ((ddflags & (C_OF | C_SEEK | C_NOTRUNC)) == (C_OF | C_SEEK) &&
162 out.flags & ISTRUNC)
163 if (ftruncate(out.fd, out.offset * out.dbsz) == -1)
164 err(1, "truncating %s", out.name);
167 * If converting case at the same time as another conversion, build a
168 * table that does both at once. If just converting case, use the
169 * built-in tables.
171 if (ddflags & (C_LCASE | C_UCASE)) {
172 if (ddflags & (C_ASCII | C_EBCDIC)) {
173 if (ddflags & C_LCASE) {
174 for (cnt = 0; cnt <= 0377; ++cnt)
175 casetab[cnt] = tolower(ctab[cnt]);
176 } else {
177 for (cnt = 0; cnt <= 0377; ++cnt)
178 casetab[cnt] = toupper(ctab[cnt]);
180 } else {
181 if (ddflags & C_LCASE) {
182 for (cnt = 0; cnt <= 0377; ++cnt)
183 casetab[cnt] = tolower((int)cnt);
184 } else {
185 for (cnt = 0; cnt <= 0377; ++cnt)
186 casetab[cnt] = toupper((int)cnt);
189 ctab = casetab;
192 gettimeofday(&tv, NULL);
193 st.start = tv.tv_sec + tv.tv_usec * 1e-6;
196 static void
197 getfdtype(IO *io)
199 struct stat sb;
200 int type;
202 if (fstat(io->fd, &sb) == -1)
203 err(1, "%s", io->name);
204 if (S_ISREG(sb.st_mode))
205 io->flags |= ISTRUNC;
206 if (S_ISCHR(sb.st_mode) || S_ISBLK(sb.st_mode)) {
207 if (ioctl(io->fd, FIODTYPE, &type) == -1) {
208 err(1, "%s", io->name);
209 } else {
210 if (type & D_TAPE)
211 io->flags |= ISTAPE;
212 else if (type & (D_DISK | D_MEM))
213 io->flags |= ISSEEK;
214 if (S_ISCHR(sb.st_mode) && (type & D_TAPE) == 0)
215 io->flags |= ISCHR;
217 return;
219 errno = 0;
220 if (lseek(io->fd, (off_t)0, SEEK_CUR) == -1 && errno == ESPIPE)
221 io->flags |= ISPIPE;
222 else
223 io->flags |= ISSEEK;
226 static void
227 dd_in(void)
229 ssize_t n;
231 for (;;) {
232 switch (cpy_cnt) {
233 case -1: /* count=0 was specified */
234 return;
235 case 0:
236 break;
237 default:
238 if (st.in_full + st.in_part >= (u_quad_t)cpy_cnt)
239 return;
240 break;
244 * Zero the buffer first if sync; if doing block operations,
245 * use spaces.
247 if (ddflags & C_SYNC) {
248 if (ddflags & (C_BLOCK | C_UNBLOCK))
249 memset(in.dbp, ' ', in.dbsz);
250 else
251 memset(in.dbp, 0, in.dbsz);
254 n = read(in.fd, in.dbp, in.dbsz);
255 if (n == 0) {
256 in.dbrcnt = 0;
257 return;
260 /* Read error. */
261 if (n == -1) {
263 * If noerror not specified, die. POSIX requires that
264 * the warning message be followed by an I/O display.
266 if (!(ddflags & C_NOERROR))
267 err(1, "%s", in.name);
268 warn("%s", in.name);
269 summary();
272 * If it's a seekable file descriptor, seek past the
273 * error. If your OS doesn't do the right thing for
274 * raw disks this section should be modified to re-read
275 * in sector size chunks.
277 if (in.flags & ISSEEK &&
278 lseek(in.fd, (off_t)in.dbsz, SEEK_CUR))
279 warn("%s", in.name);
281 /* If sync not specified, omit block and continue. */
282 if (!(ddflags & C_SYNC))
283 continue;
285 /* Read errors count as full blocks. */
286 in.dbcnt += in.dbrcnt = in.dbsz;
287 ++st.in_full;
289 /* Handle full input blocks. */
290 } else if ((size_t)n == in.dbsz) {
291 in.dbcnt += in.dbrcnt = n;
292 ++st.in_full;
294 /* Handle partial input blocks. */
295 } else {
296 /* If sync, use the entire block. */
297 if (ddflags & C_SYNC)
298 in.dbcnt += in.dbrcnt = in.dbsz;
299 else
300 in.dbcnt += in.dbrcnt = n;
301 ++st.in_part;
305 * POSIX states that if bs is set and no other conversions
306 * than noerror, notrunc or sync are specified, the block
307 * is output without buffering as it is read.
309 if (ddflags & C_BS) {
310 out.dbcnt = in.dbcnt;
311 dd_out(1);
312 in.dbcnt = 0;
313 continue;
316 if (ddflags & C_SWAB) {
317 if ((n = in.dbrcnt) & 1) {
318 ++st.swab;
319 --n;
321 swab(in.dbp, in.dbp, (size_t)n);
324 in.dbp += in.dbrcnt;
325 (*cfunc)();
330 * Clean up any remaining I/O and flush output. If necessary, the output file
331 * is truncated.
333 static void
334 dd_close(void)
336 if (cfunc == def)
337 def_close();
338 else if (cfunc == block)
339 block_close();
340 else if (cfunc == unblock)
341 unblock_close();
342 if (ddflags & C_OSYNC && out.dbcnt && out.dbcnt < out.dbsz) {
343 if (ddflags & (C_BLOCK | C_UNBLOCK))
344 memset(out.dbp, ' ', out.dbsz - out.dbcnt);
345 else
346 memset(out.dbp, 0, out.dbsz - out.dbcnt);
347 out.dbcnt = out.dbsz;
349 if (out.dbcnt || pending)
350 dd_out(1);
353 void
354 dd_out(int force)
356 u_char *outp;
357 size_t cnt, i, n;
358 ssize_t nw;
359 static int warned;
360 int sparse;
363 * Write one or more blocks out. The common case is writing a full
364 * output block in a single write; increment the full block stats.
365 * Otherwise, we're into partial block writes. If a partial write,
366 * and it's a character device, just warn. If a tape device, quit.
368 * The partial writes represent two cases. 1: Where the input block
369 * was less than expected so the output block was less than expected.
370 * 2: Where the input block was the right size but we were forced to
371 * write the block in multiple chunks. The original versions of dd(1)
372 * never wrote a block in more than a single write, so the latter case
373 * never happened.
375 * One special case is if we're forced to do the write -- in that case
376 * we play games with the buffer size, and it's usually a partial write.
378 outp = out.db;
379 for (n = force ? out.dbcnt : out.dbsz;; n = out.dbsz) {
380 for (cnt = n;; cnt -= nw) {
381 sparse = 0;
382 if (ddflags & C_SPARSE) {
383 sparse = 1; /* Is buffer sparse? */
384 for (i = 0; i < cnt; i++)
385 if (outp[i] != 0) {
386 sparse = 0;
387 break;
390 if (sparse && !force) {
391 pending += cnt;
392 nw = cnt;
393 } else {
394 if (pending != 0) {
395 if (force)
396 pending--;
397 if (lseek(out.fd, pending, SEEK_CUR) ==
399 err(2, "%s: seek error creating sparse file",
400 out.name);
401 if (force)
402 write(out.fd, outp, 1);
403 pending = 0;
405 if (cnt)
406 nw = write(out.fd, outp, cnt);
407 else
408 return;
411 if (nw <= 0) {
412 if (nw == 0)
413 errx(1, "%s: end of device", out.name);
414 if (errno != EINTR)
415 err(1, "%s", out.name);
416 nw = 0;
418 outp += nw;
419 st.bytes += nw;
420 if ((size_t)nw == n) {
421 if (n != out.dbsz)
422 ++st.out_part;
423 else
424 ++st.out_full;
425 break;
427 ++st.out_part;
428 if ((size_t)nw == cnt)
429 break;
430 if (out.flags & ISTAPE)
431 errx(1, "%s: short write on tape device",
432 out.name);
433 if (out.flags & ISCHR && !warned) {
434 warned = 1;
435 warnx("%s: short write on character device",
436 out.name);
439 if ((out.dbcnt -= n) < out.dbsz)
440 break;
443 /* Reassemble the output block. */
444 if (out.dbcnt)
445 memmove(out.db, out.dbp - out.dbcnt, out.dbcnt);
446 out.dbp = out.db + out.dbcnt;