2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/sys/config/GENERIC,v 1.60 2008/07/26 14:26:30 sephe Exp $
18 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
20 options MATH_EMULATE #Support for x87 emulation
21 options INET #InterNETworking
22 options INET6 #IPv6 communications protocols
23 options HAMMER #Hammer Filesystem
24 options NULLFS #NULL filesystem
25 options FFS #Berkeley Fast Filesystem
26 options FFS_ROOT #FFS usable as root device [keep this!]
27 options SOFTUPDATES #Enable FFS soft updates support
28 options UFS_DIRHASH #Improve performance on big directories
29 options MFS #Memory Filesystem
30 options TMPFS #Temporary Filesystem
31 options MD_ROOT #MD is a potential root device
32 options NFS #Network Filesystem
33 options NFS_ROOT #NFS usable as root device, NFS required
34 options MSDOSFS #MSDOS Filesystem
35 options CD9660 #ISO 9660 Filesystem
36 options PROCFS #Process filesystem
37 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
38 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
39 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
40 options DEVICE_POLLING # Support mixed interrupt-polling
41 # handling of network device drivers
42 options UCONSOLE #Allow users to grab the console
43 options USERCONFIG #boot -c editor
44 options VISUAL_USERCONFIG #visual boot -c editor
45 options KTRACE #ktrace(1) support
46 options SYSVSHM #SYSV-style shared memory
47 options SYSVMSG #SYSV-style message queues
48 options SYSVSEM #SYSV-style semaphores
49 options P1003_1B #Posix P1003_1B real-time extensions
50 options _KPOSIX_PRIORITY_SCHEDULING
51 options ICMP_BANDLIM #Rate limit bad replies
52 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
53 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~128k to driver.
55 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
56 # output. Adds ~215k to driver.
57 options DSCHED_FQ # Fair-queuing disk scheduler
60 options ALTQ #alternate queueing
61 options ALTQ_CBQ #class based queueing
62 options ALTQ_RED #random early detection
63 options ALTQ_RIO #triple red for diffserv (needs RED)
64 options ALTQ_HFSC #hierarchical fair service curve
65 options ALTQ_PRIQ #priority queue
66 options ALTQ_FAIRQ #fair queueing
67 #options ALTQ_NOPCC #don't use processor cycle counter
68 #options ALTQ_DEBUG #for debugging
70 # To make an SMP kernel both SMP and APIC_IO are usually
71 # specified. SMP boxes with severely broken BIOSes which
72 # boot fine for non-SMP builds *might* work in SMP mode
73 # if you define SMP and leave APIC_IO turned off.
75 #options SMP # Symmetric MultiProcessor Kernel
76 #options APIC_IO # Symmetric (APIC) I/O
78 # Debugging for Development
88 device fdc0 at isa? port IO_FD1 irq 6 drq 2
89 device fd0 at fdc0 drive 0
90 device fd1 at fdc0 drive 1
92 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
93 # don't use the above line for fdc0 but the following one:
96 # AHCI driver, this will override NATA for AHCI devices,
97 # both drivers may be included.
101 # SiI3124/3132 driver
105 # NEW-ATA (NATA) and ATAPI devices
108 device natadisk # ATA disk drives
109 device natapicd # ATAPI CDROM drives
110 device natapifd # ATAPI floppy drives
111 device natapist # ATAPI tape drives
112 device natapicam # Emulate ATAPI devices as SCSI
113 device nataraid # support for ATA software RAID
115 device natausb # ATA-over-USB support
116 options ATA_STATIC_ID # Static device numbering
118 # LEGACY ATA and ATAPI devices
119 #device ata0 at isa? port IO_WD1 irq 14
120 #device ata1 at isa? port IO_WD2 irq 15
122 #device atadisk # ATA disk drives
123 #device atapicd # ATAPI CDROM drives
124 #device atapifd # ATAPI floppy drives
125 #device atapist # ATAPI tape drives
126 #device atapicam # Emulate ATAPI devices as SCSI via CAM
127 #options ATA_STATIC_ID #Static device numbering
130 device ahb # EISA AHA1742 family
131 device ahc # AHA2940 and onboard AIC7xxx devices
132 device ahd # AHA39320/29320 and onboard AIC79xx devices
133 device amd # AMD 53C974 (Tekram DC-390(T))
134 device isp # Qlogic family
135 device mpt # LSI-Logic MPT/Fusion
136 device ncr # NCR/Symbios Logic
137 device sym # NCR/Symbios Logic (newer chipsets)
138 options SYM_SETUP_LP_PROBE_MAP=0x40
139 # Allow ncr to attach legacy NCR devices when
140 # both sym and ncr are configured
148 device ncv # NCR 53C500
149 device nsp # Workbit Ninja SCSI-3
150 device stg # TMC 18C30/18C50
153 device scbus # SCSI bus (required)
154 device da # Direct Access (disks)
155 device sa # Sequential Access (tape etc)
157 device pass # Passthrough device (direct SCSI access)
158 device sg # Passthrough device (linux scsi generic)
160 # RAID controllers interfaced to the SCSI subsystem
161 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
162 device dpt # DPT Smartcache - See LINT for options!
163 device iir # Intel Integrated RAID
164 device mly # Mylex AcceleRAID/eXtremeRAID
165 device ciss # Compaq SmartRAID 5* series
168 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
169 #device aacp # SCSI passthrough for aac (requires CAM)
170 device ida # Compaq Smart RAID
171 device ips # IBM ServeRAID
172 device amr # AMI MegaRAID
173 device mlx # Mylex DAC960 family
174 device twe # 3ware Escalade 7000/8000's
175 device twa # 3ware 9000 series PATA/SATA RAID
176 device pst # Promise Supertrack
179 # Areca RAID (CAM is required).
181 device arcmsr # Areca SATA II RAID
183 # atkbdc0 controls both the keyboard and the PS/2 mouse
184 device atkbdc0 at isa? port IO_KBD
185 device atkbd0 at atkbdc? irq 1 flags 0x1
186 device psm0 at atkbdc? irq 12
190 # kbdmux is the keyboard multiplexer
193 # splash screen/screen saver
196 # syscons is the default console driver, resembling an SCO console
197 device sc0 at isa? flags 0x100
198 options SC_PIXEL_MODE # add support for the raster text mode
200 device agp # support several AGP chipsets
202 # Floating point support - do not disable.
203 device npx0 at nexus? port IO_NPX irq 13
205 # Power management support (see LINT for more options)
206 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
208 # HW monitoring devices
209 device aps0 at isa? port 0x1600
210 device lm0 at isa? port 0x290
211 device it0 at isa? port 0x290
212 device it1 at isa? port 0xc00
213 device it2 at isa? port 0xd00
214 device it3 at isa? port 0x228
215 device wbsio0 at isa? port 0x2e
216 device wbsio1 at isa? port 0x4e
217 device lm#3 at wbsio?
219 # PCCARD (PCMCIA) support
225 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
226 device sio1 at isa? port IO_COM2 irq 3
227 device sio2 at isa? disable port IO_COM3 irq 5
228 device sio3 at isa? disable port IO_COM4 irq 9
231 device ppc0 at isa? irq 7
232 device ppbus # Parallel port bus (required)
234 device plip # TCP/IP over parallel
235 device ppi # Parallel port interface device
236 #device vpo # Requires scbus and da
239 device de # DEC/Intel DC21x4x (``Tulip'')
240 device txp # 3Com 3cR990 (``Typhoon'')
241 device vx # 3Com 3c590, 3c595 (``Vortex'')
243 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
245 device ig_hal # Intel PRO/1000 hardware abstraction layer
247 # PCI Ethernet NICs that use the common MII bus controller code.
248 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
249 device miibus # MII bus support
250 device ae # Attansic/Atheros L2 Fast Ethernet
251 device age # Attansic/Atheros L1 Gigabit Ethernet
252 device alc # Atheros AR8131/AR8132
253 device ale # Atheros AR8121/AR8113/AR8114
254 device bce # Broadcom NetXtreme II Gigabit Ethernet
255 device bfe # Broadcom BCM440x 10/100 Ethernet
256 device dc # DEC/Intel 21143 and various workalikes
257 device et # Agere ET1310 10/100/1000 Ethernet
258 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
259 device jme # JMicron Gigabit/Fast Ethernet
260 device pcn # AMD Am79C97x PCI 10/100 NICs
261 device rl # RealTek 8129/8139
262 device re # RealTek 8139C+/8169
263 device sf # Adaptec AIC-6915 (``Starfire'')
264 device sis # Silicon Integrated Systems SiS 900/SiS 7016
265 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
266 device ste # Sundance ST201 (D-Link DFE-550TX)
267 device tl # Texas Instruments ThunderLAN
268 device tx # SMC EtherPower II (83c170 ``EPIC'')
269 device vge # VIA 612x GigE
270 device vr # VIA Rhine, Rhine II
271 device wb # Winbond W89C840F
272 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
273 device bge # Broadcom BCM570x (``Tigon III'')
274 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
275 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
276 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
279 # 'device ed' requires 'device miibus'
280 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
283 device fe0 at isa? disable port 0x300
288 options IEEE80211_DEBUG #enable debugging msgs
289 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
290 options IEEE80211_SUPPORT_TDMA #enable TDMA support
291 device wlan # 802.11 support
292 device wlan_ccmp # 802.11 CCMP support
293 device wlan_tkip # 802.11 TKIP support
294 device wlan_wep # 802.11 WEP support
295 #device wlan_amrr # AMRR
297 # All wireless NICs require wlan and wlan_amrr
298 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
299 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
300 # mode (the factory default). If you set the switches on your ISA
301 # card for a manually chosen I/O address and IRQ, you must specify
302 # those parameters here.
304 device ral # Ralink Technology 802.11 wireless NIC
305 #device rtw # RealTek 802.11 wireless NIC
306 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
307 # exists only as a PCMCIA device, so there is no ISA attachment needed
308 # and resources will always be dynamically assigned by the pccard code.
311 # The probe order of these is presently determined by i386/isa/isa_compat.c.
312 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
313 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
314 device lnc0 at isa? disable port 0x280 irq 10 drq 0
315 device cs0 at isa? disable port 0x300
316 device sn0 at isa? disable port 0x300 irq 10
318 # Pseudo devices - the number indicates how many units to allocate.
319 pseudo-device loop # Network loopback
320 pseudo-device ether # Ethernet support
321 pseudo-device sl 1 # Kernel SLIP
322 pseudo-device ppp 1 # Kernel PPP
323 pseudo-device tun # Packet tunnel.
324 pseudo-device pty # Pseudo-ttys (telnet etc)
325 pseudo-device md # Memory "disks"
326 pseudo-device gif # IPv6 and IPv4 tunneling
327 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
329 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
330 # Be aware of the administrative consequences of enabling this!
331 pseudo-device bpf #Berkeley packet filter
333 pseudo-device crypto # core crypto support, used by wlan
334 pseudo-device cryptodev
337 device uhci # UHCI PCI->USB interface
338 device ohci # OHCI PCI->USB interface
339 device usb # USB Bus (required)
340 device ugen # Generic
341 device uhid # "Human Interface Devices"
342 device ukbd # Keyboard
343 device ulpt # Printer
344 device umass # Disks/Mass storage - Requires scbus and da
346 device uscanner # Scanners
347 device urio # Diamond Rio MP3 Player
348 # USB Ethernet, requires mii
349 device aue # ADMtek USB ethernet
350 device axe # ASIX Electronics USB Ethernet
351 device cue # CATC USB ethernet
352 device kue # Kawasaki LSI USB ethernet
353 device rue # RealTek 8150 based USB ethernet
354 # USB wireless NICs, requires wlan, wlan_amrr
355 #device rum # Ralink Technology RT2501USB/RT2601USB
356 #device ural # Ralink Technology RT2500USB
359 device firewire # FireWire bus code
360 device sbp # SCSI over FireWire (Requires scbus and da)
361 device fwe # Ethernet over FireWire (non-standard!)