Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 #
   4 # Build-time options are documented in make.conf(5).
   5 #
   6 # The intended user-driven targets are:
   7 #
   8 # buildworld  - rebuild *everything*, including glue to help do upgrades
   9 # quickworld  - skip the glue and do a depend+build on the meat
  10 # realquickworld - skip the glue and depend stages and just build the meat
  11 # crossworld  - only build the glue (particularly the cross-build environment)
  12 # installworld- install everything built by "buildworld"
  13 # most        - build user commands, no libraries or include files
  14 # installmost - install user commands, no libraries or include files
  15 #
  16 # Standard targets (not defined here) are documented in the makefiles in
  17 # /usr/share/mk.  These include:
  18 #               obj depend all install clean cleandepend cleanobj
  19
  20 # Put initial settings here.
  21 SUBDIR=
  22
  23 # We must do share/info early so that installation of info `dir'
  24 # entries works correctly.  Do it first since it is less likely to
  25 # grow dependencies on include and lib than vice versa.
  26 .if exists(${.CURDIR}/share/info)
  27 SUBDIR+= share/info
  28 .endif
  29
  30 # We must do include and lib early so that the perl *.ph generation
  31 # works correctly as it uses the header files installed by this.
  32 .if exists(${.CURDIR}/include)
  33 SUBDIR+= include
  34 .endif
  35 .if exists(${.CURDIR}/lib)
  36 SUBDIR+= lib
  37 .endif
  38 # This exists simply to ensure that the obj dir hierarchy is
  39 # intact for nrelease, allowing the nrelease Makefile's to
  40 # reference ${.OBJDIR}.
  41 #
  42 .if exists(${.CURDIR}/nrelease)
  43 SUBDIR+= nrelease
  44 .endif
  45
  46 .if exists(${.CURDIR}/bin)
  47 SUBDIR+= bin
  48 .endif
  49 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  50 SUBDIR+= games
  51 .endif
  52 .if exists(${.CURDIR}/gnu)
  53 SUBDIR+= gnu
  54 .endif
  55 .if exists(${.CURDIR}/libexec)
  56 SUBDIR+= libexec
  57 .endif
  58 .if exists(${.CURDIR}/sbin)
  59 SUBDIR+= sbin
  60 .endif
  61 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
  62 SUBDIR+= secure
  63 .endif
  64 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  65 SUBDIR+= share
  66 .endif
  67 .if exists(${.CURDIR}/sys)
  68 SUBDIR+= sys
  69 .endif
  70 .if exists(${.CURDIR}/usr.bin)
  71 SUBDIR+= usr.bin
  72 .endif
  73 .if exists(${.CURDIR}/usr.sbin)
  74 SUBDIR+= usr.sbin
  75 .endif
  76
  77 .if exists(${.CURDIR}/etc)
  78 SUBDIR+= etc
  79 .endif
  80
  81 # These are last, since it is nice to at least get the base system
  82 # rebuilt before you do them.
  83 .if defined(LOCAL_DIRS)
  84 .for _DIR in ${LOCAL_DIRS}
  85 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  86 SUBDIR+= ${_DIR}
  87 .endif
  88 .endfor
  89 .endif
  90
  91 .if defined(SUBDIR_OVERRIDE)
  92 SUBDIR=         ${SUBDIR_OVERRIDE}
  93 .endif
  94
  95 .if defined(NOCLEANDIR)
  96 CLEANDIR=       clean cleandepend
  97 .else
  98 CLEANDIR=       cleandir
  99 .endif
 100
 101 .if defined(NO_CLEAN)
 102 NOCLEAN=        # defined
 103 .endif
 104
 105 # Object directory base in primary make.  Note that when we rerun make
 106 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 107 # subdirectory because the rest of the build system needs it that way.
 108 # The original object directory base is saved in OBJTREE.
 109 #
 110 MAKEOBJDIRPREFIX?=      /usr/obj
 111 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 112
 113 # Used for stage installs and pathing
 114 #
 115 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 116
 117 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 118 # anyhow, and we need to be able to override it for stage installs
 119 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 120
 121 # This section sets the tools used to build the world/kernel
 122 WORLD_CCVER?=           gcc44
 123 WORLD_LDVER?=           ld.bfd
 124 WORLD_BINUTILSVER?=     binutils222
 125
 126 # temporary until everybody has converted to x86_64
 127 .if ${MACHINE_ARCH} == "amd64"
 128 MACHINE_ARCH=   x86_64
 129 .makeenv MACHINE_ARCH
 130 .endif
 131
 132 TARGET_ARCH?=   ${MACHINE_ARCH}
 133 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 134 TARGET?=        ${MACHINE}
 135 .else
 136 TARGET?=        ${TARGET_ARCH}
 137 .endif
 138 .if make(buildworld)
 139 BUILD_ARCH!=    sysctl -n hw.machine_arch
 140
 141 # temporary until everybody has converted to x86_64
 142 .if ${BUILD_ARCH} == "amd64"
 143 BUILD_ARCH=     x86_64
 144 .endif
 145
 146 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 147 .error To cross-build, set TARGET_ARCH.
 148 .endif
 149 .endif
 150
 151 # Backwards compatibility with older make's or older sys.mk's.  make
 152 # is expected to define MACHINE_PLATFORM.
 153 #
 154 .if !defined(MACHINE_PLATFORM)
 155 MACHINE_PLATFORM= pc32
 156 .endif
 157
 158 # XXX this is ugly and we need to come up with a nicer solution
 159 .if !defined(TARGET_PLATFORM)
 160 .if ${TARGET_ARCH} == "i386"
 161 TARGET_PLATFORM= pc32
 162 .elif ${TARGET_ARCH} == "x86_64"
 163 TARGET_PLATFORM= pc64
 164 .else
 165 .error Unknown target architecture.
 166 .endif
 167 .endif
 168
 169 THREAD_LIB?=    thread_xu
 170 .if ${THREAD_LIB} == "c_r"
 171 .if defined(NO_LIBC_R)
 172 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
 173 .endif
 174 .endif
 175
 176 # BTOOLS        (Natively built) All non-cross-development tools that the
 177 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 178 #               We will not use the native system's exec path once we start
 179 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 180 #
 181 # CTOOLS        (Natively built) Cross development tools which are specific
 182 #               to the target architecture.
 183 #
 184 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 185 #               CTOOLS.
 186 #
 187 # MACHINE_PLATFORM Platform Architecture we are building on
 188 # MACHINE       Machine Architecture (usually the same as MACHINE_ARCH)
 189 # MACHINE_ARCH  Cpu Architecture we are building on
 190 #
 191 # TARGET_PLATFORM Platform Architecture we are building for
 192 # TARGET        Machine Architecture we are building for
 193 # TARGET_ARCH   Cpu Architecture we are building for
 194 #
 195 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 196 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 197 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 198
 199 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 200 # cross-tools stages to augment the existing command path to access newer
 201 # versions of certain utilities such as 'patch' that the cross-tools stage
 202 # might expect.
 203 #
 204 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 205
 206 # The strict temporary command path contains all binaries required
 207 # by the buildworld system after the cross-tools stage.
 208 #
 209 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin
 210
 211 TMPDIR?=        /tmp
 212 TMPPID!=        echo $$$$
 213
 214 #
 215 # Building a world goes through the following stages
 216 #
 217 # 1. bootstrap-tool stage [BMAKE]
 218 #       This stage is responsible for creating programs that
 219 #       are needed for backward compatibility reasons. They
 220 #       are not built as cross-tools.
 221 # 2. build-tool stage [TMAKE]
 222 #       This stage is responsible for creating the object
 223 #       tree and building any tools that are needed during
 224 #       the build process.
 225 # 3. cross-tool stage [XMAKE]
 226 #       This stage is responsible for creating any tools that
 227 #       are needed for cross-builds. A cross-compiler is one
 228 #       of them.
 229 # 4. world stage [WMAKE]
 230 #       This stage actually builds the world.
 231 # 5. install stage (optional) [IMAKE]
 232 #       This stage installs a previously built world.
 233 #
 234
 235 # bootstrap-tool stage
 236 #
 237 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 238                 OBJTREE=${OBJTREE} \
 239                 DESTDIR=${BTOOLSDEST} \
 240                 PATH=${BTOOLSPATH}:${PATH} \
 241                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 242
 243 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 244                 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 245                 -DNO_WERROR -DNO_NLS
 246
 247 # build-tool stage
 248 #
 249 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 250                 OBJTREE=${OBJTREE} \
 251                 DESTDIR= \
 252                 PATH=${BTOOLSPATH}:${PATH} \
 253                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 254
 255 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 256                 -DNO_FORTRAN -DNOSHARED
 257
 258 # cross-tool stage
 259 #
 260 # note: TOOLS_PREFIX points to the obj root holding the cross
 261 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 262 #       holding the target environment (and also determines where cross-built
 263 #       libraries, crt*.o, and include files are installed).
 264 #
 265 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 266                 OBJTREE=${OBJTREE} \
 267                 DESTDIR=${CTOOLSDEST} \
 268                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 269                 TOOLS_PREFIX=${CTOOLSDEST} \
 270                 USRDATA_PREFIX=${WORLDDEST} \
 271                 PATH=${BTOOLSPATH}:${PATH}
 272
 273 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 274                 -DBOOTSTRAPPING -DNOSHARED
 275
 276 # world stage, note the strict path and note that TOOLS_PREFIX is left
 277 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 278 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 279 # for both binary and library paths, even though it is being compiled to
 280 # WORLDDEST.  None of the programs in the world stage are ever actually
 281 # executed during the buildworld/installworld.
 282 #
 283 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 284                 OBJTREE=${OBJTREE} \
 285                 MACHINE_ARCH=${TARGET_ARCH} \
 286                 MACHINE=${TARGET} \
 287                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 288                 OBJFORMAT_PATH=${CTOOLSDEST} \
 289                 HOST_CCVER=${HOST_CCVER} \
 290                 CCVER=${WORLD_CCVER} \
 291                 LDVER=${WORLD_LDVER} \
 292                 BINUTILSVER=${WORLD_BINUTILSVER}
 293
 294 WMAKEENV=       ${CROSSENV} \
 295                 DESTDIR=${WORLDDEST} \
 296                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 297                 PATH=${STRICTTMPPATH}
 298
 299 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 300
 301 # install stage
 302 #
 303 IMAKEENV=       ${CROSSENV} \
 304                 PATH=${STRICTTMPPATH}
 305 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 306
 307 # kernel stage
 308 #
 309 KMAKEENV=       ${WMAKEENV}
 310
 311 # buildworld
 312 #
 313 # Attempt to rebuild the entire system, with reasonable chance of
 314 # success, regardless of how old your existing system is.
 315 #
 316 _worldtmp: _cleantmp _mtreetmp
 317 .ORDER: _cleantmp _mtreetmp
 318
 319 _cleantmp:
 320         @echo
 321         @echo "--------------------------------------------------------------"
 322         @echo ">>> Rebuilding the temporary build tree"
 323         @echo "--------------------------------------------------------------"
 324 .if !defined(NOCLEAN)
 325         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 326 .else
 327         # XXX - These two can depend on any header file.
 328         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 329         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 330 .endif
 331
 332 _mtreetmp:
 333         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 334 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 335         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 336                 -p ${_dir}/  > /dev/null
 337         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 338                 -p ${_dir}/usr > /dev/null
 339 .endfor
 340         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 341                 -p ${WORLDDEST}/usr/include > /dev/null
 342         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 343
 344 _bootstrap-tools:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 1: bootstrap tools"
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 350 _cleanobj:
 351         @echo
 352         @echo "--------------------------------------------------------------"
 353         @echo ">>> stage 2a: cleaning up the object tree"
 354         @echo "--------------------------------------------------------------"
 355         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 356 _obj:
 357         @echo
 358         @echo "--------------------------------------------------------------"
 359         @echo ">>> stage 2b: rebuilding the object tree"
 360         @echo "--------------------------------------------------------------"
 361         cd ${.CURDIR}; ${WMAKE} par-obj
 362 _build-tools:
 363         @echo
 364         @echo "--------------------------------------------------------------"
 365         @echo ">>> stage 2c: build tools"
 366         @echo "--------------------------------------------------------------"
 367         cd ${.CURDIR}; ${TMAKE} build-tools
 368 _cross-tools:
 369         @echo
 370         @echo "--------------------------------------------------------------"
 371         @echo ">>> stage 3: cross tools"
 372         @echo "--------------------------------------------------------------"
 373         cd ${.CURDIR}; ${XMAKE} cross-tools
 374 _includes:
 375         @echo
 376         @echo "--------------------------------------------------------------"
 377         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 378         @echo "--------------------------------------------------------------"
 379         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 380 _libraries:
 381         @echo
 382         @echo "--------------------------------------------------------------"
 383         @echo ">>> stage 4b: building libraries"
 384         @echo "--------------------------------------------------------------"
 385         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 386 _depend:
 387         @echo
 388         @echo "--------------------------------------------------------------"
 389         @echo ">>> stage 4c: make dependencies"
 390         @echo "--------------------------------------------------------------"
 391         cd ${.CURDIR}; ${WMAKE} par-depend
 392 everything:
 393         @echo
 394         @echo "--------------------------------------------------------------"
 395         @echo ">>> stage 4d: building everything.."
 396         @echo "--------------------------------------------------------------"
 397         cd ${.CURDIR}; ${WMAKE} all
 398
 399 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 400 # entire object tree and built the bootstrap tools in a different location.
 401 #
 402 # buildworld    - build everything from scratch
 403 # quickworld    - skip the bootstrap, build, and cross-build steps
 404 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 405 #
 406 # note: we include _obj in realquickworld to prevent accidental creation
 407 # of files in /usr/src.
 408
 409 WMAKE_TGTS=
 410 .if !defined(SUBDIR_OVERRIDE)
 411 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 412 .endif
 413 WMAKE_TGTS+=    _obj _build-tools
 414 .if !defined(SUBDIR_OVERRIDE)
 415 WMAKE_TGTS+=    _cross-tools
 416 .endif
 417 WMAKE_TGTS+=    _includes _libraries _depend everything
 418
 419 buildworld: ${WMAKE_TGTS}
 420
 421 quickworld: _mtreetmp _obj _includes _libraries _depend everything
 422
 423 realquickworld: _mtreetmp _obj _includes _libraries everything
 424
 425 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 426
 427 .ORDER: ${WMAKE_TGTS}
 428 .ORDER: _obj _includes
 429 .ORDER: _mtreetmp _obj
 430
 431 #
 432 # installcheck
 433 #
 434 # Checks to be sure system is ready for installworld
 435 #
 436 installcheck:
 437 .if !defined(NO_SENDMAIL)
 438         @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 439         @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 440 .endif
 441         @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 442         @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
 443         @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 444 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 445         @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
 446 .endif
 447 #
 448 # installworld
 449 #
 450 # Installs everything compiled by a 'buildworld'.
 451 #
 452 installworld: installcheck
 453         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 454         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
 455
 456 #
 457 # reinstall
 458 #
 459 # If you have a build server, you can NFS mount the source and obj directories
 460 # and do a 'make reinstall' on the *client* to install new binaries from the
 461 # most recent server build.
 462 #
 463 reinstall:
 464         @echo "--------------------------------------------------------------"
 465         @echo ">>> Making hierarchy"
 466         @echo "--------------------------------------------------------------"
 467         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 468         @echo
 469         @echo "--------------------------------------------------------------"
 470         @echo ">>> Installing everything.."
 471         @echo "--------------------------------------------------------------"
 472         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 473
 474 #
 475 # buildkernel, nativekernel, quickkernel, and installkernel
 476 #
 477 # Which kernels to build and/or install is specified by setting
 478 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 479 # Only the existing (depending TARGET) config files are used
 480 # for building kernels and only the first of these is designated
 481 # as the one being installed.
 482 #
 483 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 484 # kernel and modules to be stripped of its debug info (required
 485 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 486 # if you only want to strip the modules of their debug info.  These
 487 # only apply if you have DEBUG=-g in your kernel config or make line.
 488 #
 489 # Note that we have to use TARGET instead of TARGET_ARCH when
 490 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 491 # be set to cross-build, we have to make sure TARGET is set
 492 # properly.
 493
 494 .if !defined(KERNCONF) && defined(KERNEL)
 495 KERNCONF=       ${KERNEL}
 496 KERNWARN=       yes
 497 .else
 498 # XXX makeshift fix to build the right kernel for the (target) architecture
 499 # We should configure this in the platform files somehow
 500 .if ${TARGET_ARCH} == "i386"
 501 KERNCONF?=      GENERIC
 502 .else
 503 KERNCONF?=      X86_64_GENERIC
 504 .endif
 505 .endif
 506 INSTKERNNAME?=  kernel
 507
 508 KRNLSRCDIR=     ${.CURDIR}/sys
 509 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 510 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 511 KERNCONFDIR?=   ${KRNLCONFDIR}
 512
 513 BUILDKERNELS=
 514 INSTALLKERNEL=
 515 .for _kernel in ${KERNCONF}
 516 .if exists(${KERNCONFDIR}/${_kernel})
 517 BUILDKERNELS+=  ${_kernel}
 518 .if empty(INSTALLKERNEL)
 519 INSTALLKERNEL= ${_kernel}
 520 .endif
 521 .endif
 522 .endfor
 523
 524 # kernel version numbers survive rm -rf
 525 #
 526 .for _kernel in ${BUILDKERNELS}
 527 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 528 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 529 .endif
 530 .endfor
 531
 532 #
 533 # buildkernel
 534 #
 535 # Builds all kernels defined by BUILDKERNELS.
 536 #
 537 bk_tools:
 538         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 539             echo "You must buildworld before buildkernel.  If you wish"; \
 540             echo "to build a kernel using native tools, config it manually"; \
 541             echo "or use the nativekernel target if you are in a rush"; \
 542             exit 1; \
 543         fi
 544
 545 maybe_bk_tools:
 546 .for _kernel in ${BUILDKERNELS}
 547         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 548             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 549                 echo "The kernel was build using buildworld tools which no" ; \
 550                 echo "longer appear to exist, quickkernel failed!" ; \
 551                 exit 1; \
 552             fi; \
 553         fi
 554 .endfor
 555
 556 bk_build_list:
 557 .if empty(BUILDKERNELS)
 558         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 559         @echo ">>> Did you move your kernel configs from i386/conf to config/?"
 560         @false
 561 .endif
 562
 563 bk_kernwarn:
 564 .if defined(KERNWARN)
 565         @echo "--------------------------------------------------------------"
 566         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 567         @echo "--------------------------------------------------------------"
 568         @sleep 3
 569 .endif
 570         @echo
 571
 572 # The buildkernel target rebuilds the specified kernels from scratch
 573 # using the crossbuild tools generated by the last buildworld.  It is
 574 # the safest (but also the most time consuming) way to build a new kernel.
 575 #
 576 buildkernel:    bk_tools bk_build_list bk_kernwarn
 577 .for _kernel in ${BUILDKERNELS}
 578         @echo "--------------------------------------------------------------"
 579         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 580         @echo "--------------------------------------------------------------"
 581         @echo "===> ${_kernel}"
 582 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 583         rm -rf ${KRNLOBJDIR}/${_kernel}
 584 .else
 585         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 586                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 587                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 588 .endif
 589         mkdir -p ${KRNLOBJDIR}
 590 .if !defined(NO_KERNELCONFIG)
 591         cd ${KRNLCONFDIR}; \
 592                 PATH=${STRICTTMPPATH} \
 593                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 594                         ${KERNCONFDIR}/${_kernel}
 595 .endif
 596 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 597         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 598 .endif
 599         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 600 .if !defined(NO_KERNELDEPEND)
 601         cd ${KRNLOBJDIR}/${_kernel}; \
 602             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 603 .endif
 604         cd ${KRNLOBJDIR}/${_kernel}; \
 605             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 606         @echo "--------------------------------------------------------------"
 607         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 608         @echo "--------------------------------------------------------------"
 609 .endfor
 610
 611 # The nativekernel target rebuilds the specified kernels from scratch
 612 # using the system's standard compiler rather than using the crossbuild
 613 # tools generated by the last buildworld.  This is fairly safe if your
 614 # system is reasonable up-to-date.
 615 #
 616 nativekernel:   bk_build_list bk_kernwarn
 617 .for _kernel in ${BUILDKERNELS}
 618         @echo "--------------------------------------------------------------"
 619         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 620         @echo "--------------------------------------------------------------"
 621         @echo "===> ${_kernel}"
 622 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 623         rm -rf ${KRNLOBJDIR}/${_kernel}
 624 .else
 625         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 626                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 627                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 628 .endif
 629         mkdir -p ${KRNLOBJDIR}
 630 .if !defined(NO_KERNELCONFIG)
 631         cd ${KRNLCONFDIR}; \
 632                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 633                         ${KERNCONFDIR}/${_kernel}
 634 .endif
 635 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 636         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 637 .endif
 638         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 639         cd ${KRNLOBJDIR}/${_kernel}; \
 640             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 641             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 642 .if !defined(NO_KERNELDEPEND)
 643         cd ${KRNLOBJDIR}/${_kernel}; \
 644             ${MAKE} KERNEL=${INSTKERNNAME} depend
 645 .endif
 646         cd ${KRNLOBJDIR}/${_kernel}; \
 647             ${MAKE} KERNEL=${INSTKERNNAME} all
 648         @echo "--------------------------------------------------------------"
 649         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 650         @echo "--------------------------------------------------------------"
 651 .endfor
 652
 653 # The quickkernel target rebuilds the specified kernels as quickly
 654 # as possible.  It will use the native tools or the buildworld cross tools
 655 # based on whether the kernel was originally generated via buildkernel or
 656 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 657 # nor is the make depend step run.
 658 #
 659 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 660 .for _kernel in ${BUILDKERNELS}
 661         @echo "--------------------------------------------------------------"
 662         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 663         @echo "--------------------------------------------------------------"
 664         @echo "===> ${_kernel}"
 665 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 666 .if !defined(NO_KERNELCONFIG)
 667         cd ${KRNLCONFDIR}; \
 668                 PATH=${STRICTTMPPATH} \
 669                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 670                         ${KERNCONFDIR}/${_kernel}
 671 .endif
 672         cd ${KRNLOBJDIR}/${_kernel}; \
 673             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 674 .else
 675 .if !defined(NO_KERNELCONFIG)
 676         cd ${KRNLCONFDIR}; \
 677             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 678                 ${KERNCONFDIR}/${_kernel}
 679 .endif
 680         cd ${KRNLOBJDIR}/${_kernel}; \
 681             ${MAKE} KERNEL=${INSTKERNNAME} all
 682 .endif
 683         @echo "--------------------------------------------------------------"
 684         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 685         @echo "--------------------------------------------------------------"
 686 .endfor
 687
 688
 689 # installkernel
 690 #
 691 # Install the kernel defined by INSTALLKERNEL
 692 #
 693 installkernel reinstallkernel:
 694         @echo "--------------------------------------------------------------"
 695         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
 696         @echo "--------------------------------------------------------------"
 697 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
 698         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 699             ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 700 .else
 701         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 702             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 703 .endif
 704
 705 #
 706 # most
 707 #
 708 # Build most of the user binaries on the existing system libs and includes.
 709 #
 710 most:
 711         @echo "--------------------------------------------------------------"
 712         @echo ">>> Building programs only"
 713         @echo "--------------------------------------------------------------"
 714 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 715         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 716 .endfor
 717
 718 #
 719 # installmost
 720 #
 721 # Install the binaries built by the 'most' target.  This does not include
 722 # libraries or include files.
 723 #
 724 installmost:
 725         @echo "--------------------------------------------------------------"
 726         @echo ">>> Installing programs only"
 727         @echo "--------------------------------------------------------------"
 728 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 729         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 730 .endfor
 731
 732 #
 733 # ------------------------------------------------------------------------
 734 #
 735 # From here onwards are utility targets used by the 'make world' and
 736 # related targets.  If your 'world' breaks, you may like to try to fix
 737 # the problem and manually run the following targets to attempt to
 738 # complete the build.  Beware, this is *not* guaranteed to work, you
 739 # need to have a pretty good grip on the current state of the system
 740 # to attempt to manually finish it.  If in doubt, 'make world' again.
 741 #
 742
 743 # bootstrap-tools: Build all tools required to build all tools.  Note that
 744 # order is important in a number of cases and also note that the bootstrap
 745 # and build tools stages have access to earlier binaries they themselves
 746 # had generated.
 747 #
 748 # patch:        older patch's do not have -i.  This program must be built
 749 #               first so other bootstrap tools that need to apply patches
 750 #               can use it.
 751 # [x]install:   dependancies on various new install features
 752 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 753 #               envs are not compatible with older objformat binaries.
 754 #
 755 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
 756 _strfile=       games/fortune/strfile
 757 .endif
 758
 759 BSTRAPDIRS= ${_strfile} \
 760         usr.bin/patch \
 761         bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
 762         bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
 763         bin/hostname bin/kill \
 764         usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 765         usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
 766         usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 767         usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 768         usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 769         usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 770         usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 771         usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 772         usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 773         usr.bin/tail usr.bin/unifdef usr.bin/tic \
 774         usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 775         usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
 776         gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
 777         usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
 778
 779 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets
 780         touch ${BTOOLSDEST}/.bootstrap_done
 781
 782 bootstrap-tools-before:
 783         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 784
 785 bootstrap-tools-targets: ${BSTRAPDIRS:S/^/bstrap-/}
 786
 787 .ORDER: bootstrap-tools-before bootstrap-tools-targets
 788
 789 .for _tool in ${BSTRAPDIRS}
 790 bstrap-${_tool}!
 791         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 792                 cd ${.CURDIR}/${_tool}; \
 793                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 794                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 795                 ${MAKE} DIRPRFX=${_tool}/ all; \
 796                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 797 .endfor
 798
 799 # build-tools: Build special purpose build tools.
 800 #
 801 # XXX we may be able to remove or consolidate this into bootstrap-tools
 802 # now that we have the native helper (.nx/.no) infrastructure.
 803 #
 804 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
 805 _share= share/syscons/scrnmaps
 806 .endif
 807
 808 .if !defined(NO_GCC41)
 809 _gcc41_cross= gnu/usr.bin/cc41
 810 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
 811 .endif
 812 _gcc44_cross= gnu/usr.bin/cc44
 813 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
 814 _custom_cross= libexec/customcc
 815 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
 816
 817 BTOOLSDIRS= ${_gcc41_tools} ${_gcc44_tools} ${_share}
 818
 819 build-tools: build-tools-targets
 820         touch ${BTOOLSDEST}/.build_done
 821
 822 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
 823
 824 .ORDER: ${_gcc41_tools:S/^/btools-/}
 825 .ORDER: ${_gcc44_tools:S/^/btools-/}
 826
 827 .for _tool in ${BTOOLSDIRS}
 828 btools-${_tool}!
 829         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 830                 cd ${.CURDIR}/${_tool}; \
 831                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 832                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 833                 ${MAKE} DIRPRFX=${_tool}/ all; \
 834                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 835 .endfor
 836
 837 #
 838 # cross-tools: Build cross-building tools
 839 #
 840 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 841 _btxld= usr.sbin/btxld
 842 .endif
 843
 844 CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat \
 845                 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
 846
 847 cross-tools: cross-tools-targets
 848         touch ${CTOOLSDEST}/.cross_done
 849
 850 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
 851
 852 .for _tool in ${CTOOLSDIRS}
 853 ctools-${_tool}!
 854         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 855                 cd ${.CURDIR}/${_tool}; \
 856                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 857                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 858                 ${MAKE} DIRPRFX=${_tool}/ all; \
 859                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 860 .endfor
 861
 862 #
 863 # hierarchy - ensure that all the needed directories are present
 864 #
 865 hierarchy:
 866         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 867
 868 #
 869 # libraries - build all libraries, and install them under ${DESTDIR}.
 870 #
 871 # The list of libraries with dependents (${_prebuild_libs}) and their
 872 # interdependencies (__L) are built automatically by the
 873 # ${.CURDIR}/tools/make_libdeps.sh script.
 874 #
 875 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 876 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 877 #
 878 libraries:
 879 .if !defined(NO_GCC41)
 880         cd ${.CURDIR}; \
 881             HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
 882                 ${MAKE} -f Makefile.inc1 _startup_libs41;
 883 .endif
 884         cd ${.CURDIR}; \
 885             HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
 886                 ${MAKE} -f Makefile.inc1 _startup_libs44;
 887         cd ${.CURDIR}; \
 888             ${MAKE} -f Makefile.inc1 _startup_libs; \
 889             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 890             ${MAKE} -f Makefile.inc1 _generic_libs;
 891         touch ${WORLDDEST}/.libraries_done
 892
 893 # These dependencies are not automatically generated:
 894 #
 895 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
 896 # shared libraries for ELF.  The target for _startup_libsXX is
 897 # specifically built using gccXX.
 898 #
 899 _startup_libs41=        gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
 900 _startup_libs44=        gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
 901 _startup_libs=          lib/csu lib/libc lib/libc_rtld
 902
 903 _prebuild_libs=         lib/libbz2 lib/liblzma lib/libz
 904 _prebuild_libs+=        lib/libutil
 905
 906 _generic_libs=  gnu/lib
 907
 908 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 909                 lib/libncurses/libncurses lib/libopie lib/libradius \
 910                 lib/libsbuf lib/libtacplus lib/libm \
 911                 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
 912                 lib/libpthread lib/libprop lib/libdevattr
 913
 914 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 915
 916 _generic_libs+= lib
 917
 918 .if !defined(NO_CRYPT)
 919 .if !defined(NO_OPENSSL)
 920 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 921 .if !defined(NO_OPENSSH)
 922 _prebuild_libs+=        secure/lib/libssh
 923 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 924 .endif
 925 .endif
 926 _generic_libs+= secure/lib
 927 .endif
 928
 929 _generic_libs+= usr.bin/lex/lib
 930
 931 .for _lib in ${_startup_libs41} ${_startup_libs44} \
 932                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 933 ${_lib}__L: .PHONY
 934 .if exists(${.CURDIR}/${_lib})
 935         ${ECHODIR} "===> ${_lib}"; \
 936                 cd ${.CURDIR}/${_lib}; \
 937                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 938                 ${MAKE} DIRPRFX=${_lib}/ all; \
 939                 ${MAKE} DIRPRFX=${_lib}/ install
 940 .endif
 941 .endfor
 942
 943 _startup_libs: ${_startup_libs:S/$/__L/}
 944 _startup_libs41: ${_startup_libs41:S/$/__L/}
 945 _startup_libs44: ${_startup_libs44:S/$/__L/}
 946 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 947 _generic_libs: ${_generic_libs:S/$/__L/}
 948
 949 # library targets must be ordered because there are inter-library
 950 # races (e.g. generation of tconfig.h)
 951 #
 952 .ORDER: ${_startup_libs41:S/$/__L/}
 953 .ORDER: ${_startup_libs44:S/$/__L/}
 954 .ORDER: ${_startup_libs:S/$/__L/}
 955 .ORDER: ${_prebuild_libs:S/$/__L/}
 956 .ORDER: ${_generic_libs:S/$/__L/}
 957
 958 .for __target in clean cleandepend cleandir obj depend includes
 959 .for entry in ${SUBDIR}
 960 ${entry}.${__target}__D: .PHONY
 961         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 962                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 963                 edir=${entry}.${MACHINE_ARCH}; \
 964                 cd ${.CURDIR}/$${edir}; \
 965         else \
 966                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 967                 edir=${entry}; \
 968                 cd ${.CURDIR}/$${edir}; \
 969         fi; \
 970         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 971 .endfor
 972 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 973 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 974 .endfor
 975 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 976
 977 # The wmake target is used by /usr/bin/wmake to run make in a
 978 # world build environment.
 979 #
 980 wmake:
 981         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 982
 983 wmakeenv:
 984         @echo '${WMAKEENV} /bin/sh'
 985
 986 bmake:
 987         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 988
 989 bmakeenv:
 990         @echo '${BMAKEENV} /bin/sh'
 991
 992 tmake:
 993         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
 994
 995 tmakeenv:
 996         @echo '${TMAKEENV} /bin/sh'
 997
 998 xmake:
 999         @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
1000
1001 xmakeenv:
1002         @echo '${XMAKEENV} /bin/sh'
1003
1004 .include <bsd.subdir.mk>
1005