sys/dev/netif/wpi/if_wpi_debug.h

   1 /*-
   2  * Copyright (c) 2006,2007
   3  *      Damien Bergamini <damien.bergamini@free.fr>
   4  *      Benjamin Close <Benjamin.Close@clearchain.com>
   5  * Copyright (c) 2015 Andriy Voskoboinyk <avos@FreeBSD.org>
   6  *
   7  * Permission to use, copy, modify, and distribute this software for any
   8  * purpose with or without fee is hereby granted, provided that the above
   9  * copyright notice and this permission notice appear in all copies.
  10  *
  11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18  *
  19  * $FreeBSD$
  20  */
  21
  22 #ifndef __IF_WPI_DEBUG_H__
  23 #define __IF_WPI_DEBUG_H__
  24
  25 #ifdef WPI_DEBUG
  26 enum {
  27         WPI_DEBUG_XMIT          = 0x00000001,   /* basic xmit operation */
  28         WPI_DEBUG_RECV          = 0x00000002,   /* basic recv operation */
  29         WPI_DEBUG_STATE         = 0x00000004,   /* 802.11 state transitions */
  30         WPI_DEBUG_HW            = 0x00000008,   /* Stage 1 (eeprom) debugging */
  31         WPI_DEBUG_RESET         = 0x00000010,   /* reset processing */
  32         WPI_DEBUG_FIRMWARE      = 0x00000020,   /* firmware(9) loading debug */
  33         WPI_DEBUG_BEACON        = 0x00000040,   /* beacon handling */
  34         WPI_DEBUG_WATCHDOG      = 0x00000080,   /* watchdog timeout */
  35         WPI_DEBUG_INTR          = 0x00000100,   /* ISR */
  36         WPI_DEBUG_SCAN          = 0x00000200,   /* Scan related operations */
  37         WPI_DEBUG_NOTIFY        = 0x00000400,   /* State 2 Notif intr debug */
  38         WPI_DEBUG_TEMP          = 0x00000800,   /* TXPower/Temp Calibration */
  39         WPI_DEBUG_CMD           = 0x00001000,   /* cmd submission */
  40         WPI_DEBUG_TRACE         = 0x00002000,   /* Print begin and start driver function */
  41         WPI_DEBUG_PWRSAVE       = 0x00004000,   /* Power save operations */
  42         WPI_DEBUG_EEPROM        = 0x00008000,   /* EEPROM info */
  43         WPI_DEBUG_NODE          = 0x00010000,   /* node addition/removal */
  44         WPI_DEBUG_KEY           = 0x00020000,   /* node key management */
  45         WPI_DEBUG_EDCA          = 0x00040000,   /* WME info */
  46         WPI_DEBUG_REGISTER      = 0x00080000,   /* print chipset register */
  47         WPI_DEBUG_BMISS         = 0x00100000,   /* print number of missed beacons */
  48         WPI_DEBUG_ANY           = 0xffffffff
  49 };
  50
  51 #define DPRINTF(sc, m, ...) do {                \
  52         if (sc->sc_debug & (m))                 \
  53                 printf(__VA_ARGS__);            \
  54 } while (0)
  55
  56 #define TRACE_STR_BEGIN         "->%s: begin\n"
  57 #define TRACE_STR_DOING         "->Doing %s\n"
  58 #define TRACE_STR_END           "->%s: end\n"
  59 #define TRACE_STR_END_ERR       "->%s: end in error\n"
  60
  61 #define WPI_DESC(x) case x:     return #x
  62
  63 static const char *wpi_cmd_str(int cmd)
  64 {
  65         switch (cmd) {
  66                 /* Notifications. */
  67                 WPI_DESC(WPI_UC_READY);
  68                 WPI_DESC(WPI_RX_DONE);
  69                 WPI_DESC(WPI_START_SCAN);
  70                 WPI_DESC(WPI_SCAN_RESULTS);
  71                 WPI_DESC(WPI_STOP_SCAN);
  72                 WPI_DESC(WPI_BEACON_SENT);
  73                 WPI_DESC(WPI_RX_STATISTICS);
  74                 WPI_DESC(WPI_BEACON_STATISTICS);
  75                 WPI_DESC(WPI_STATE_CHANGED);
  76                 WPI_DESC(WPI_BEACON_MISSED);
  77
  78                 /* Command notifications. */
  79                 WPI_DESC(WPI_CMD_RXON);
  80                 WPI_DESC(WPI_CMD_RXON_ASSOC);
  81                 WPI_DESC(WPI_CMD_EDCA_PARAMS);
  82                 WPI_DESC(WPI_CMD_TIMING);
  83                 WPI_DESC(WPI_CMD_ADD_NODE);
  84                 WPI_DESC(WPI_CMD_DEL_NODE);
  85                 WPI_DESC(WPI_CMD_TX_DATA);
  86                 WPI_DESC(WPI_CMD_MRR_SETUP);
  87                 WPI_DESC(WPI_CMD_SET_LED);
  88                 WPI_DESC(WPI_CMD_SET_POWER_MODE);
  89                 WPI_DESC(WPI_CMD_SCAN);
  90                 WPI_DESC(WPI_CMD_SCAN_ABORT);
  91                 WPI_DESC(WPI_CMD_SET_BEACON);
  92                 WPI_DESC(WPI_CMD_TXPOWER);
  93                 WPI_DESC(WPI_CMD_BT_COEX);
  94
  95         default:
  96                 return "UNKNOWN CMD";
  97         }
  98 }
  99
 100 /*
 101  * Translate CSR code to string
 102  */
 103 static const char *wpi_get_csr_string(size_t csr)
 104 {
 105         switch (csr) {
 106                 WPI_DESC(WPI_HW_IF_CONFIG);
 107                 WPI_DESC(WPI_INT);
 108                 WPI_DESC(WPI_INT_MASK);
 109                 WPI_DESC(WPI_FH_INT);
 110                 WPI_DESC(WPI_GPIO_IN);
 111                 WPI_DESC(WPI_RESET);
 112                 WPI_DESC(WPI_GP_CNTRL);
 113                 WPI_DESC(WPI_EEPROM);
 114                 WPI_DESC(WPI_EEPROM_GP);
 115                 WPI_DESC(WPI_GIO);
 116                 WPI_DESC(WPI_UCODE_GP1);
 117                 WPI_DESC(WPI_UCODE_GP2);
 118                 WPI_DESC(WPI_GIO_CHICKEN);
 119                 WPI_DESC(WPI_ANA_PLL);
 120                 WPI_DESC(WPI_DBG_HPET_MEM);
 121         default:
 122                 KASSERT(0, ("Unknown CSR: %d\n", csr));
 123                 return "UNKNOWN CSR";
 124         }
 125 }
 126
 127 static const char *wpi_get_prph_string(size_t prph)
 128 {
 129         switch (prph) {
 130                 WPI_DESC(WPI_APMG_CLK_CTRL);
 131                 WPI_DESC(WPI_APMG_PS);
 132                 WPI_DESC(WPI_APMG_PCI_STT);
 133                 WPI_DESC(WPI_APMG_RFKILL);
 134         default:
 135                 KASSERT(0, ("Unknown register: %d\n", prph));
 136                 return "UNKNOWN PRPH";
 137         }
 138 }
 139
 140 #else
 141 #define DPRINTF(sc, m, ...)     do { (void) sc; } while (0)
 142 #endif
 143
 144 #endif  /* __IF_WPI_DEBUG_H__ */