2 * Copyright (c) 2004,2013 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * Copyright (c) 1989, 1993
35 * The Regents of the University of California. All rights reserved.
36 * (c) UNIX System Laboratories, Inc.
37 * All or some portions of this file are derived from material licensed
38 * to the University of California by American Telephone and Telegraph
39 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
40 * the permission of UNIX System Laboratories, Inc.
42 * Redistribution and use in source and binary forms, with or without
43 * modification, are permitted provided that the following conditions
45 * 1. Redistributions of source code must retain the above copyright
46 * notice, this list of conditions and the following disclaimer.
47 * 2. Redistributions in binary form must reproduce the above copyright
48 * notice, this list of conditions and the following disclaimer in the
49 * documentation and/or other materials provided with the distribution.
50 * 3. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68 * External virtual filesystem routines
71 #include <sys/param.h>
72 #include <sys/systm.h>
73 #include <sys/kernel.h>
74 #include <sys/malloc.h>
75 #include <sys/mount.h>
77 #include <sys/vnode.h>
79 #include <sys/eventhandler.h>
80 #include <sys/kthread.h>
81 #include <sys/sysctl.h>
83 #include <machine/limits.h>
86 #include <sys/thread2.h>
87 #include <sys/sysref2.h>
90 #include <vm/vm_object.h>
92 struct mountscan_info
{
93 TAILQ_ENTRY(mountscan_info
) msi_entry
;
95 struct mount
*msi_node
;
98 struct vmntvnodescan_info
{
99 TAILQ_ENTRY(vmntvnodescan_info
) entry
;
107 static int vnlru_nowhere
= 0;
108 SYSCTL_INT(_debug
, OID_AUTO
, vnlru_nowhere
, CTLFLAG_RD
,
110 "Number of times the vnlru process ran without success");
113 static struct lwkt_token mntid_token
;
114 static struct mount dummymount
;
116 /* note: mountlist exported to pstat */
117 struct mntlist mountlist
= TAILQ_HEAD_INITIALIZER(mountlist
);
118 static TAILQ_HEAD(,mountscan_info
) mountscan_list
;
119 static struct lwkt_token mountlist_token
;
121 static TAILQ_HEAD(,bio_ops
) bio_ops_list
= TAILQ_HEAD_INITIALIZER(bio_ops_list
);
124 * Called from vfsinit()
129 lwkt_token_init(&mountlist_token
, "mntlist");
130 lwkt_token_init(&mntid_token
, "mntid");
131 TAILQ_INIT(&mountscan_list
);
132 mount_init(&dummymount
);
133 dummymount
.mnt_flag
|= MNT_RDONLY
;
134 dummymount
.mnt_kern_flag
|= MNTK_ALL_MPSAFE
;
138 * Support function called to remove a vnode from the mountlist and
139 * deal with side effects for scans in progress.
141 * Target mnt_token is held on call.
144 vremovevnodemnt(struct vnode
*vp
)
146 struct vmntvnodescan_info
*info
;
147 struct mount
*mp
= vp
->v_mount
;
149 TAILQ_FOREACH(info
, &mp
->mnt_vnodescan_list
, entry
) {
151 info
->vp
= TAILQ_NEXT(vp
, v_nmntvnodes
);
153 TAILQ_REMOVE(&vp
->v_mount
->mnt_nvnodelist
, vp
, v_nmntvnodes
);
157 * Allocate a new vnode and associate it with a tag, mount point, and
160 * A VX locked and refd vnode is returned. The caller should setup the
161 * remaining fields and vx_put() or, if he wishes to leave a vref,
162 * vx_unlock() the vnode.
165 getnewvnode(enum vtagtype tag
, struct mount
*mp
,
166 struct vnode
**vpp
, int lktimeout
, int lkflags
)
170 KKASSERT(mp
!= NULL
);
172 vp
= allocvnode(lktimeout
, lkflags
);
177 * By default the vnode is assigned the mount point's normal
180 vp
->v_ops
= &mp
->mnt_vn_use_ops
;
181 vp
->v_pbuf_count
= nswbuf_kva
/ NSWBUF_SPLIT
;
184 * Placing the vnode on the mount point's queue makes it visible.
185 * VNON prevents it from being messed with, however.
190 * A VX locked & refd vnode is returned.
197 * This function creates vnodes with special operations vectors. The
198 * mount point is optional.
200 * This routine is being phased out but is still used by vfs_conf to
201 * create vnodes for devices prior to the root mount (with mp == NULL).
204 getspecialvnode(enum vtagtype tag
, struct mount
*mp
,
205 struct vop_ops
**ops
,
206 struct vnode
**vpp
, int lktimeout
, int lkflags
)
210 vp
= allocvnode(lktimeout
, lkflags
);
219 * Placing the vnode on the mount point's queue makes it visible.
220 * VNON prevents it from being messed with, however.
225 * A VX locked & refd vnode is returned.
232 * Interlock against an unmount, return 0 on success, non-zero on failure.
234 * The passed flag may be 0 or LK_NOWAIT and is only used if an unmount
237 * If no unmount is in-progress LK_NOWAIT is ignored. No other flag bits
238 * are used. A shared locked will be obtained and the filesystem will not
239 * be unmountable until the lock is released.
242 vfs_busy(struct mount
*mp
, int flags
)
246 atomic_add_int(&mp
->mnt_refs
, 1);
247 lwkt_gettoken(&mp
->mnt_token
);
248 if (mp
->mnt_kern_flag
& MNTK_UNMOUNT
) {
249 if (flags
& LK_NOWAIT
) {
250 lwkt_reltoken(&mp
->mnt_token
);
251 atomic_add_int(&mp
->mnt_refs
, -1);
254 /* XXX not MP safe */
255 mp
->mnt_kern_flag
|= MNTK_MWAIT
;
258 * Since all busy locks are shared except the exclusive
259 * lock granted when unmounting, the only place that a
260 * wakeup needs to be done is at the release of the
261 * exclusive lock at the end of dounmount.
263 * WARNING! mp can potentially go away once we release
266 tsleep((caddr_t
)mp
, 0, "vfs_busy", 0);
267 lwkt_reltoken(&mp
->mnt_token
);
268 atomic_add_int(&mp
->mnt_refs
, -1);
272 if (lockmgr(&mp
->mnt_lock
, lkflags
))
273 panic("vfs_busy: unexpected lock failure");
274 lwkt_reltoken(&mp
->mnt_token
);
279 * Free a busy filesystem.
281 * Once refs is decremented the mount point can potentially get ripped
282 * out from under us, but we want to clean up our refs before unlocking
283 * so do a hold/drop around the whole mess.
285 * This is not in the critical path (I hope).
288 vfs_unbusy(struct mount
*mp
)
291 atomic_add_int(&mp
->mnt_refs
, -1);
292 lockmgr(&mp
->mnt_lock
, LK_RELEASE
);
297 * Lookup a filesystem type, and if found allocate and initialize
298 * a mount structure for it.
300 * Devname is usually updated by mount(8) after booting.
303 vfs_rootmountalloc(char *fstypename
, char *devname
, struct mount
**mpp
)
305 struct vfsconf
*vfsp
;
308 if (fstypename
== NULL
)
311 vfsp
= vfsconf_find_by_name(fstypename
);
314 mp
= kmalloc(sizeof(struct mount
), M_MOUNT
, M_WAITOK
| M_ZERO
);
316 lockinit(&mp
->mnt_lock
, "vfslock", VLKTIMEOUT
, 0);
320 mp
->mnt_op
= vfsp
->vfc_vfsops
;
321 mp
->mnt_pbuf_count
= nswbuf_kva
/ NSWBUF_SPLIT
;
322 vfsp
->vfc_refcount
++;
323 mp
->mnt_stat
.f_type
= vfsp
->vfc_typenum
;
324 mp
->mnt_flag
|= MNT_RDONLY
;
325 mp
->mnt_flag
|= vfsp
->vfc_flags
& MNT_VISFLAGMASK
;
326 strncpy(mp
->mnt_stat
.f_fstypename
, vfsp
->vfc_name
, MFSNAMELEN
);
327 copystr(devname
, mp
->mnt_stat
.f_mntfromname
, MNAMELEN
- 1, 0);
330 * Pre-set MPSAFE flags for VFS_MOUNT() call.
332 if (vfsp
->vfc_flags
& VFCF_MPSAFE
)
333 mp
->mnt_kern_flag
|= MNTK_ALL_MPSAFE
;
341 * Basic mount structure initialization
344 mount_init(struct mount
*mp
)
346 lockinit(&mp
->mnt_lock
, "vfslock", hz
*5, 0);
347 lwkt_token_init(&mp
->mnt_token
, "permnt");
349 TAILQ_INIT(&mp
->mnt_vnodescan_list
);
350 TAILQ_INIT(&mp
->mnt_nvnodelist
);
351 TAILQ_INIT(&mp
->mnt_reservedvnlist
);
352 TAILQ_INIT(&mp
->mnt_jlist
);
353 mp
->mnt_nvnodelistsize
= 0;
355 mp
->mnt_hold
= 1; /* hold for umount last drop */
356 mp
->mnt_iosize_max
= MAXPHYS
;
357 vn_syncer_thr_create(mp
);
361 mount_hold(struct mount
*mp
)
363 atomic_add_int(&mp
->mnt_hold
, 1);
367 mount_drop(struct mount
*mp
)
369 if (atomic_fetchadd_int(&mp
->mnt_hold
, -1) == 1) {
370 KKASSERT(mp
->mnt_refs
== 0);
376 * Lookup a mount point by filesystem identifier.
379 vfs_getvfs(fsid_t
*fsid
)
383 lwkt_gettoken(&mountlist_token
);
384 TAILQ_FOREACH(mp
, &mountlist
, mnt_list
) {
385 if (mp
->mnt_stat
.f_fsid
.val
[0] == fsid
->val
[0] &&
386 mp
->mnt_stat
.f_fsid
.val
[1] == fsid
->val
[1]) {
390 lwkt_reltoken(&mountlist_token
);
395 * Get a new unique fsid. Try to make its val[0] unique, since this value
396 * will be used to create fake device numbers for stat(). Also try (but
397 * not so hard) make its val[0] unique mod 2^16, since some emulators only
398 * support 16-bit device numbers. We end up with unique val[0]'s for the
399 * first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
401 * Keep in mind that several mounts may be running in parallel. Starting
402 * the search one past where the previous search terminated is both a
403 * micro-optimization and a defense against returning the same fsid to
407 vfs_getnewfsid(struct mount
*mp
)
409 static u_int16_t mntid_base
;
413 lwkt_gettoken(&mntid_token
);
414 mtype
= mp
->mnt_vfc
->vfc_typenum
;
415 tfsid
.val
[1] = mtype
;
416 mtype
= (mtype
& 0xFF) << 24;
418 tfsid
.val
[0] = makeudev(255,
419 mtype
| ((mntid_base
& 0xFF00) << 8) | (mntid_base
& 0xFF));
421 if (vfs_getvfs(&tfsid
) == NULL
)
424 mp
->mnt_stat
.f_fsid
.val
[0] = tfsid
.val
[0];
425 mp
->mnt_stat
.f_fsid
.val
[1] = tfsid
.val
[1];
426 lwkt_reltoken(&mntid_token
);
430 * Set the FSID for a new mount point to the template. Adjust
431 * the FSID to avoid collisions.
434 vfs_setfsid(struct mount
*mp
, fsid_t
*template)
438 bzero(&mp
->mnt_stat
.f_fsid
, sizeof(mp
->mnt_stat
.f_fsid
));
440 if (vfs_getvfs(template) == NULL
)
445 mp
->mnt_stat
.f_fsid
= *template;
450 * This routine is called when we have too many vnodes. It attempts
451 * to free <count> vnodes and will potentially free vnodes that still
452 * have VM backing store (VM backing store is typically the cause
453 * of a vnode blowout so we want to do this). Therefore, this operation
454 * is not considered cheap.
456 * A number of conditions may prevent a vnode from being reclaimed.
457 * the buffer cache may have references on the vnode, a directory
458 * vnode may still have references due to the namei cache representing
459 * underlying files, or the vnode may be in active use. It is not
460 * desireable to reuse such vnodes. These conditions may cause the
461 * number of vnodes to reach some minimum value regardless of what
462 * you set kern.maxvnodes to. Do not set kern.maxvnodes too low.
466 * Attempt to recycle vnodes in a context that is always safe to block.
467 * Calling vlrurecycle() from the bowels of file system code has some
468 * interesting deadlock problems.
470 static struct thread
*vnlruthread
;
475 struct thread
*td
= curthread
;
477 EVENTHANDLER_REGISTER(shutdown_pre_sync
, shutdown_kproc
, td
,
483 kproc_suspend_loop();
486 * Try to free some vnodes if we have too many. Trigger based
487 * on potentially freeable vnodes but calculate the count
488 * based on total vnodes.
490 * (long) -> deal with 64 bit machines, intermediate overflow
492 ncached
= countcachedvnodes(1);
493 if (numvnodes
>= maxvnodes
* 9 / 10 &&
494 ncached
+ inactivevnodes
>= maxvnodes
* 5 / 10) {
495 int count
= numvnodes
- maxvnodes
* 9 / 10;
497 if (count
> (ncached
+ inactivevnodes
) / 100)
498 count
= (ncached
+ inactivevnodes
) / 100;
501 freesomevnodes(count
);
505 * Do non-critical-path (more robust) cache cleaning,
506 * even if vnode counts are nominal, to try to avoid
507 * having to do it in the critical path.
512 * Nothing to do if most of our vnodes are already on
515 ncached
= countcachedvnodes(1);
516 if (numvnodes
<= maxvnodes
* 9 / 10 ||
517 ncached
+ inactivevnodes
<= maxvnodes
* 5 / 10) {
518 tsleep(vnlruthread
, 0, "vlruwt", hz
);
525 * MOUNTLIST FUNCTIONS
529 * mountlist_insert (MP SAFE)
531 * Add a new mount point to the mount list.
534 mountlist_insert(struct mount
*mp
, int how
)
536 lwkt_gettoken(&mountlist_token
);
537 if (how
== MNTINS_FIRST
)
538 TAILQ_INSERT_HEAD(&mountlist
, mp
, mnt_list
);
540 TAILQ_INSERT_TAIL(&mountlist
, mp
, mnt_list
);
541 lwkt_reltoken(&mountlist_token
);
545 * mountlist_interlock (MP SAFE)
547 * Execute the specified interlock function with the mountlist token
548 * held. The function will be called in a serialized fashion verses
549 * other functions called through this mechanism.
552 mountlist_interlock(int (*callback
)(struct mount
*), struct mount
*mp
)
556 lwkt_gettoken(&mountlist_token
);
557 error
= callback(mp
);
558 lwkt_reltoken(&mountlist_token
);
563 * mountlist_boot_getfirst (DURING BOOT ONLY)
565 * This function returns the first mount on the mountlist, which is
566 * expected to be the root mount. Since no interlocks are obtained
567 * this function is only safe to use during booting.
571 mountlist_boot_getfirst(void)
573 return(TAILQ_FIRST(&mountlist
));
577 * mountlist_remove (MP SAFE)
579 * Remove a node from the mountlist. If this node is the next scan node
580 * for any active mountlist scans, the active mountlist scan will be
581 * adjusted to skip the node, thus allowing removals during mountlist
585 mountlist_remove(struct mount
*mp
)
587 struct mountscan_info
*msi
;
589 lwkt_gettoken(&mountlist_token
);
590 TAILQ_FOREACH(msi
, &mountscan_list
, msi_entry
) {
591 if (msi
->msi_node
== mp
) {
592 if (msi
->msi_how
& MNTSCAN_FORWARD
)
593 msi
->msi_node
= TAILQ_NEXT(mp
, mnt_list
);
595 msi
->msi_node
= TAILQ_PREV(mp
, mntlist
, mnt_list
);
598 TAILQ_REMOVE(&mountlist
, mp
, mnt_list
);
599 lwkt_reltoken(&mountlist_token
);
603 * mountlist_exists (MP SAFE)
605 * Checks if a node exists in the mountlist.
606 * This function is mainly used by VFS quota code to check if a
607 * cached nullfs struct mount pointer is still valid at use time
609 * FIXME: there is no warranty the mp passed to that function
610 * will be the same one used by VFS_ACCOUNT() later
613 mountlist_exists(struct mount
*mp
)
618 lwkt_gettoken(&mountlist_token
);
619 TAILQ_FOREACH(lmp
, &mountlist
, mnt_list
) {
625 lwkt_reltoken(&mountlist_token
);
630 * mountlist_scan (MP SAFE)
632 * Safely scan the mount points on the mount list. Unless otherwise
633 * specified each mount point will be busied prior to the callback and
634 * unbusied afterwords. The callback may safely remove any mount point
635 * without interfering with the scan. If the current callback
636 * mount is removed the scanner will not attempt to unbusy it.
638 * If a mount node cannot be busied it is silently skipped.
640 * The callback return value is aggregated and a total is returned. A return
641 * value of < 0 is not aggregated and will terminate the scan.
643 * MNTSCAN_FORWARD - the mountlist is scanned in the forward direction
644 * MNTSCAN_REVERSE - the mountlist is scanned in reverse
645 * MNTSCAN_NOBUSY - the scanner will make the callback without busying
648 * NOTE: mount_hold()/mount_drop() sequence primarily helps us avoid
649 * confusion for the unbusy check, particularly if a kfree/kmalloc
650 * occurs quickly (lots of processes mounting and unmounting at the
654 mountlist_scan(int (*callback
)(struct mount
*, void *), void *data
, int how
)
656 struct mountscan_info info
;
661 lwkt_gettoken(&mountlist_token
);
664 info
.msi_node
= NULL
; /* paranoia */
665 TAILQ_INSERT_TAIL(&mountscan_list
, &info
, msi_entry
);
669 if (how
& MNTSCAN_FORWARD
) {
670 info
.msi_node
= TAILQ_FIRST(&mountlist
);
671 while ((mp
= info
.msi_node
) != NULL
) {
673 if (how
& MNTSCAN_NOBUSY
) {
674 count
= callback(mp
, data
);
675 } else if (vfs_busy(mp
, LK_NOWAIT
) == 0) {
676 count
= callback(mp
, data
);
677 if (mp
== info
.msi_node
)
686 if (mp
== info
.msi_node
)
687 info
.msi_node
= TAILQ_NEXT(mp
, mnt_list
);
689 } else if (how
& MNTSCAN_REVERSE
) {
690 info
.msi_node
= TAILQ_LAST(&mountlist
, mntlist
);
691 while ((mp
= info
.msi_node
) != NULL
) {
693 if (how
& MNTSCAN_NOBUSY
) {
694 count
= callback(mp
, data
);
695 } else if (vfs_busy(mp
, LK_NOWAIT
) == 0) {
696 count
= callback(mp
, data
);
697 if (mp
== info
.msi_node
)
706 if (mp
== info
.msi_node
)
707 info
.msi_node
= TAILQ_PREV(mp
, mntlist
, mnt_list
);
710 TAILQ_REMOVE(&mountscan_list
, &info
, msi_entry
);
711 lwkt_reltoken(&mountlist_token
);
716 * MOUNT RELATED VNODE FUNCTIONS
719 static struct kproc_desc vnlru_kp
= {
724 SYSINIT(vnlru
, SI_SUB_KTHREAD_UPDATE
, SI_ORDER_FIRST
, kproc_start
, &vnlru_kp
);
727 * Move a vnode from one mount queue to another.
730 insmntque(struct vnode
*vp
, struct mount
*mp
)
735 * Delete from old mount point vnode list, if on one.
737 if ((omp
= vp
->v_mount
) != NULL
) {
738 lwkt_gettoken(&omp
->mnt_token
);
739 KKASSERT(omp
== vp
->v_mount
);
740 KASSERT(omp
->mnt_nvnodelistsize
> 0,
741 ("bad mount point vnode list size"));
743 omp
->mnt_nvnodelistsize
--;
744 lwkt_reltoken(&omp
->mnt_token
);
748 * Insert into list of vnodes for the new mount point, if available.
749 * The 'end' of the LRU list is the vnode prior to mp->mnt_syncer.
755 lwkt_gettoken(&mp
->mnt_token
);
757 if (mp
->mnt_syncer
) {
758 TAILQ_INSERT_BEFORE(mp
->mnt_syncer
, vp
, v_nmntvnodes
);
760 TAILQ_INSERT_TAIL(&mp
->mnt_nvnodelist
, vp
, v_nmntvnodes
);
762 mp
->mnt_nvnodelistsize
++;
763 lwkt_reltoken(&mp
->mnt_token
);
768 * Scan the vnodes under a mount point and issue appropriate callbacks.
770 * The fastfunc() callback is called with just the mountlist token held
771 * (no vnode lock). It may not block and the vnode may be undergoing
772 * modifications while the caller is processing it. The vnode will
773 * not be entirely destroyed, however, due to the fact that the mountlist
774 * token is held. A return value < 0 skips to the next vnode without calling
775 * the slowfunc(), a return value > 0 terminates the loop.
777 * WARNING! The fastfunc() should not indirect through vp->v_object, the vp
778 * data structure is unstable when called from fastfunc().
780 * The slowfunc() callback is called after the vnode has been successfully
781 * locked based on passed flags. The vnode is skipped if it gets rearranged
782 * or destroyed while blocking on the lock. A non-zero return value from
783 * the slow function terminates the loop. The slow function is allowed to
784 * arbitrarily block. The scanning code guarentees consistency of operation
785 * even if the slow function deletes or moves the node, or blocks and some
786 * other thread deletes or moves the node.
792 int (*fastfunc
)(struct mount
*mp
, struct vnode
*vp
, void *data
),
793 int (*slowfunc
)(struct mount
*mp
, struct vnode
*vp
, void *data
),
796 struct vmntvnodescan_info info
;
799 int maxcount
= mp
->mnt_nvnodelistsize
* 2;
803 lwkt_gettoken(&mp
->mnt_token
);
806 * If asked to do one pass stop after iterating available vnodes.
807 * Under heavy loads new vnodes can be added while we are scanning,
808 * so this isn't perfect. Create a slop factor of 2x.
810 if (flags
& VMSC_ONEPASS
)
811 stopcount
= mp
->mnt_nvnodelistsize
;
813 info
.vp
= TAILQ_FIRST(&mp
->mnt_nvnodelist
);
814 TAILQ_INSERT_TAIL(&mp
->mnt_vnodescan_list
, &info
, entry
);
816 while ((vp
= info
.vp
) != NULL
) {
817 if (--maxcount
== 0) {
818 kprintf("Warning: excessive fssync iteration\n");
819 maxcount
= mp
->mnt_nvnodelistsize
* 2;
823 * Skip if visible but not ready, or special (e.g.
826 if (vp
->v_type
== VNON
)
828 KKASSERT(vp
->v_mount
== mp
);
831 * Quick test. A negative return continues the loop without
832 * calling the slow test. 0 continues onto the slow test.
833 * A positive number aborts the loop.
836 if ((r
= fastfunc(mp
, vp
, data
)) < 0) {
845 * Get a vxlock on the vnode, retry if it has moved or isn't
846 * in the mountlist where we expect it.
851 switch(flags
& (VMSC_GETVP
|VMSC_GETVX
|VMSC_NOWAIT
)) {
853 error
= vget(vp
, LK_EXCLUSIVE
);
855 case VMSC_GETVP
|VMSC_NOWAIT
:
856 error
= vget(vp
, LK_EXCLUSIVE
|LK_NOWAIT
);
869 * Do not call the slow function if the vnode is
870 * invalid or if it was ripped out from under us
871 * while we (potentially) blocked.
873 if (info
.vp
== vp
&& vp
->v_type
!= VNON
)
874 r
= slowfunc(mp
, vp
, data
);
879 switch(flags
& (VMSC_GETVP
|VMSC_GETVX
|VMSC_NOWAIT
)) {
881 case VMSC_GETVP
|VMSC_NOWAIT
:
896 * Yield after some processing. Depending on the number
897 * of vnodes, we might wind up running for a long time.
898 * Because threads are not preemptable, time critical
899 * userland processes might starve. Give them a chance
902 if (++count
== 10000) {
904 * We really want to yield a bit, so we simply
907 tsleep(mp
, 0, "vnodescn", 1);
912 * If doing one pass this decrements to zero. If it starts
913 * at zero it is effectively unlimited for the purposes of
916 if (--stopcount
== 0)
920 * Iterate. If the vnode was ripped out from under us
921 * info.vp will already point to the next vnode, otherwise
922 * we have to obtain the next valid vnode ourselves.
925 info
.vp
= TAILQ_NEXT(vp
, v_nmntvnodes
);
928 TAILQ_REMOVE(&mp
->mnt_vnodescan_list
, &info
, entry
);
929 lwkt_reltoken(&mp
->mnt_token
);
934 * Remove any vnodes in the vnode table belonging to mount point mp.
936 * If FORCECLOSE is not specified, there should not be any active ones,
937 * return error if any are found (nb: this is a user error, not a
938 * system error). If FORCECLOSE is specified, detach any active vnodes
941 * If WRITECLOSE is set, only flush out regular file vnodes open for
944 * SKIPSYSTEM causes any vnodes marked VSYSTEM to be skipped.
946 * `rootrefs' specifies the base reference count for the root vnode
947 * of this filesystem. The root vnode is considered busy if its
948 * v_refcnt exceeds this value. On a successful return, vflush()
949 * will call vrele() on the root vnode exactly rootrefs times.
950 * If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
954 static int busyprt
= 0; /* print out busy vnodes */
955 SYSCTL_INT(_debug
, OID_AUTO
, busyprt
, CTLFLAG_RW
, &busyprt
, 0, "");
958 static int vflush_scan(struct mount
*mp
, struct vnode
*vp
, void *data
);
967 vflush(struct mount
*mp
, int rootrefs
, int flags
)
969 struct thread
*td
= curthread
; /* XXX */
970 struct vnode
*rootvp
= NULL
;
972 struct vflush_info vflush_info
;
975 KASSERT((flags
& (SKIPSYSTEM
| WRITECLOSE
)) == 0,
976 ("vflush: bad args"));
978 * Get the filesystem root vnode. We can vput() it
979 * immediately, since with rootrefs > 0, it won't go away.
981 if ((error
= VFS_ROOT(mp
, &rootvp
)) != 0) {
982 if ((flags
& FORCECLOSE
) == 0)
985 /* continue anyway */
991 vflush_info
.busy
= 0;
992 vflush_info
.flags
= flags
;
994 vmntvnodescan(mp
, VMSC_GETVX
, NULL
, vflush_scan
, &vflush_info
);
996 if (rootrefs
> 0 && (flags
& FORCECLOSE
) == 0) {
998 * If just the root vnode is busy, and if its refcount
999 * is equal to `rootrefs', then go ahead and kill it.
1001 KASSERT(vflush_info
.busy
> 0, ("vflush: not busy"));
1002 KASSERT(VREFCNT(rootvp
) >= rootrefs
, ("vflush: rootrefs"));
1003 if (vflush_info
.busy
== 1 && VREFCNT(rootvp
) == rootrefs
) {
1005 vgone_vxlocked(rootvp
);
1007 vflush_info
.busy
= 0;
1010 if (vflush_info
.busy
)
1012 for (; rootrefs
> 0; rootrefs
--)
1018 * The scan callback is made with an VX locked vnode.
1021 vflush_scan(struct mount
*mp
, struct vnode
*vp
, void *data
)
1023 struct vflush_info
*info
= data
;
1025 int flags
= info
->flags
;
1028 * Generally speaking try to deactivate on 0 refs (catch-all)
1030 atomic_set_int(&vp
->v_refcnt
, VREF_FINALIZE
);
1033 * Skip over a vnodes marked VSYSTEM.
1035 if ((flags
& SKIPSYSTEM
) && (vp
->v_flag
& VSYSTEM
)) {
1040 * Do not force-close VCHR or VBLK vnodes
1042 if (vp
->v_type
== VCHR
|| vp
->v_type
== VBLK
)
1043 flags
&= ~(WRITECLOSE
|FORCECLOSE
);
1046 * If WRITECLOSE is set, flush out unlinked but still open
1047 * files (even if open only for reading) and regular file
1048 * vnodes open for writing.
1050 if ((flags
& WRITECLOSE
) &&
1051 (vp
->v_type
== VNON
||
1052 (VOP_GETATTR(vp
, &vattr
) == 0 &&
1053 vattr
.va_nlink
> 0)) &&
1054 (vp
->v_writecount
== 0 || vp
->v_type
!= VREG
)) {
1059 * If we are the only holder (refcnt of 1) or the vnode is in
1060 * termination (refcnt < 0), we can vgone the vnode.
1062 if (VREFCNT(vp
) <= 1) {
1068 * If FORCECLOSE is set, forcibly destroy the vnode and then move
1069 * it to a dummymount structure so vop_*() functions don't deref
1072 if (flags
& FORCECLOSE
) {
1075 if (vp
->v_mount
== NULL
)
1076 insmntque(vp
, &dummymount
);
1080 if (vp
->v_type
== VCHR
|| vp
->v_type
== VBLK
)
1081 kprintf("vflush: Warning, cannot destroy busy device vnode\n");
1084 vprint("vflush: busy vnode", vp
);
1091 add_bio_ops(struct bio_ops
*ops
)
1093 TAILQ_INSERT_TAIL(&bio_ops_list
, ops
, entry
);
1097 rem_bio_ops(struct bio_ops
*ops
)
1099 TAILQ_REMOVE(&bio_ops_list
, ops
, entry
);
1103 * This calls the bio_ops io_sync function either for a mount point
1106 * WARNING: softdeps is weirdly coded and just isn't happy unless
1107 * io_sync is called with a NULL mount from the general syncing code.
1110 bio_ops_sync(struct mount
*mp
)
1112 struct bio_ops
*ops
;
1115 if ((ops
= mp
->mnt_bioops
) != NULL
)
1118 TAILQ_FOREACH(ops
, &bio_ops_list
, entry
) {
1125 * Lookup a mount point by nch
1128 mount_get_by_nc(struct namecache
*ncp
)
1130 struct mount
*mp
= NULL
;
1132 lwkt_gettoken(&mountlist_token
);
1133 TAILQ_FOREACH(mp
, &mountlist
, mnt_list
) {
1134 if (ncp
== mp
->mnt_ncmountpt
.ncp
)
1137 lwkt_reltoken(&mountlist_token
);