2 # GENERIC_SMP -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULL filesystem
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options TMPFS #Temporary Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55 options DSCHED_FQ # Fair-queuing disk scheduler
58 options ALTQ #alternate queueing
59 options ALTQ_CBQ #class based queueing
60 options ALTQ_RED #random early detection
61 options ALTQ_RIO #triple red for diffserv (needs RED)
62 options ALTQ_HFSC #hierarchical fair service curve
63 options ALTQ_PRIQ #priority queue
64 options ALTQ_FAIRQ #fair queueing
65 #options ALTQ_NOPCC #don't use processor cycle counter
66 #options ALTQ_DEBUG #for debugging
68 # To make an SMP kernel both SMP and APIC_IO are usually
69 # specified. SMP boxes with severely broken BIOSes which
70 # boot fine for non-SMP builds *might* work in SMP mode
71 # if you define SMP and leave APIC_IO turned off.
73 options SMP # Symmetric MultiProcessor Kernel
74 options APIC_IO # Symmetric (APIC) I/O
76 # Debugging for Development
86 device fdc0 at isa? port IO_FD1 irq 6 drq 2
87 device fd0 at fdc0 drive 0
88 device fd1 at fdc0 drive 1
90 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
91 # don't use the above line for fdc0 but the following one:
94 # AHCI driver, this will override NATA for AHCI devices,
95 # both drivers may be included.
103 # NEW-ATA (NATA) and ATAPI devices
106 device natadisk # ATA disk drives
107 device natapicd # ATAPI CDROM drives
108 device natapifd # ATAPI floppy drives
109 device natapist # ATAPI tape drives
110 device natapicam # Emulate ATAPI devices as SCSI
111 device nataraid # support for ATA software RAID
113 device natausb # ATA-over-USB support
114 options ATA_STATIC_ID # Static device numbering
116 # LEGACY ATA and ATAPI devices
117 #device ata0 at isa? port IO_WD1 irq 14
118 #device ata1 at isa? port IO_WD2 irq 15
120 #device atadisk # ATA disk drives
121 #device atapicd # ATAPI CDROM drives
122 #device atapifd # ATAPI floppy drives
123 #device atapist # ATAPI tape drives
124 #device atapicam # Emulate ATAPI devices as SCSI via CAM
125 #options ATA_STATIC_ID #Static device numbering
128 device ahb # EISA AHA1742 family
129 device ahc # AHA2940 and onboard AIC7xxx devices
130 device ahd # AHA39320/29320 and onboard AIC79xx devices
131 device amd # AMD 53C974 (Tekram DC-390(T))
132 device isp # Qlogic family
133 device mpt # LSI-Logic MPT/Fusion
134 device ncr # NCR/Symbios Logic
135 device sym # NCR/Symbios Logic (newer chipsets)
136 options SYM_SETUP_LP_PROBE_MAP=0x40
137 # Allow ncr to attach legacy NCR devices when
138 # both sym and ncr are configured
146 device ncv # NCR 53C500
147 device nsp # Workbit Ninja SCSI-3
148 device stg # TMC 18C30/18C50
151 device scbus # SCSI bus (required)
152 device da # Direct Access (disks)
153 device sa # Sequential Access (tape etc)
155 device pass # Passthrough device (direct SCSI access)
156 device sg # Passthrough device (linux scsi generic)
158 # RAID controllers interfaced to the SCSI subsystem
159 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
160 device dpt # DPT Smartcache - See LINT for options!
161 device iir # Intel Integrated RAID
162 device mly # Mylex AcceleRAID/eXtremeRAID
163 device ciss # Compaq SmartRAID 5* series
166 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
167 #device aacp # SCSI passthrough for aac (requires CAM)
168 device ida # Compaq Smart RAID
169 device ips # IBM ServeRAID
170 device amr # AMI MegaRAID
171 device mlx # Mylex DAC960 family
172 device twe # 3ware Escalade 7000/8000's
173 device twa # 3ware 9000 series PATA/SATA RAID
174 device pst # Promise Supertrack
177 # Areca RAID (CAM is required).
179 device arcmsr # Areca SATA II RAID
181 # atkbdc0 controls both the keyboard and the PS/2 mouse
182 device atkbdc0 at isa? port IO_KBD
183 device atkbd0 at atkbdc? irq 1 flags 0x1
184 device psm0 at atkbdc? irq 12
188 # kbdmux is the keyboard multiplexer
191 # splash screen/screen saver
194 # syscons is the default console driver, resembling an SCO console
195 device sc0 at isa? flags 0x100
196 options SC_PIXEL_MODE # add support for the raster text mode
198 device agp # support several AGP chipsets
200 # Floating point support - do not disable.
201 device npx0 at nexus? port IO_NPX irq 13
203 # Power management support (see LINT for more options)
204 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
206 # HW monitoring devices
207 device aps0 at isa? port 0x1600
208 device lm0 at isa? port 0x290
209 device it0 at isa? port 0x290
210 device it1 at isa? port 0xc00
211 device it2 at isa? port 0xd00
212 device it3 at isa? port 0x228
213 device wbsio0 at isa? port 0x2e
214 device wbsio1 at isa? port 0x4e
215 device lm#3 at wbsio?
217 # PCCARD (PCMCIA) support
223 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
224 device sio1 at isa? port IO_COM2 irq 3
225 device sio2 at isa? disable port IO_COM3 irq 5
226 device sio3 at isa? disable port IO_COM4 irq 9
229 device ppc0 at isa? irq 7
230 device ppbus # Parallel port bus (required)
232 device plip # TCP/IP over parallel
233 device ppi # Parallel port interface device
234 #device vpo # Requires scbus and da
237 device de # DEC/Intel DC21x4x (``Tulip'')
238 device txp # 3Com 3cR990 (``Typhoon'')
239 device vx # 3Com 3c590, 3c595 (``Vortex'')
241 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
243 device ig_hal # Intel PRO/1000 hardware abstraction layer
245 # PCI Ethernet NICs that use the common MII bus controller code.
246 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
247 device miibus # MII bus support
248 device ae # Attansic/Atheros L2 Fast Ethernet
249 device age # Attansic/Atheros L1 Gigabit Ethernet
250 device alc # Atheros AR8131/AR8132
251 device ale # Atheros AR8121/AR8113/AR8114
252 device bce # Broadcom NetXtreme II Gigabit Ethernet
253 device bfe # Broadcom BCM440x 10/100 Ethernet
254 device dc # DEC/Intel 21143 and various workalikes
255 device et # Agere ET1310 10/100/1000 Ethernet
256 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
257 device jme # JMicron Gigabit/Fast Ethernet
258 device pcn # AMD Am79C97x PCI 10/100 NICs
259 device rl # RealTek 8129/8139
260 device re # RealTek 8139C+/8169
261 device sf # Adaptec AIC-6915 (``Starfire'')
262 device sis # Silicon Integrated Systems SiS 900/SiS 7016
263 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
264 device ste # Sundance ST201 (D-Link DFE-550TX)
265 device tl # Texas Instruments ThunderLAN
266 device tx # SMC EtherPower II (83c170 ``EPIC'')
267 device vge # VIA 612x GigE
268 device vr # VIA Rhine, Rhine II
269 device wb # Winbond W89C840F
270 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
271 device bge # Broadcom BCM570x (``Tigon III'')
272 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
273 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
274 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
277 # 'device ed' requires 'device miibus'
278 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
281 device fe0 at isa? disable port 0x300
286 options IEEE80211_DEBUG #enable debugging msgs
287 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
288 options IEEE80211_SUPPORT_TDMA #enable TDMA support
289 device wlan # 802.11 support
290 device wlan_ccmp # 802.11 CCMP support
291 device wlan_tkip # 802.11 TKIP support
292 device wlan_wep # 802.11 WEP support
293 #device wlan_amrr # AMRR
295 # All wireless NICs require wlan and wlan_amrr
296 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
297 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
298 # mode (the factory default). If you set the switches on your ISA
299 # card for a manually chosen I/O address and IRQ, you must specify
300 # those parameters here.
302 device ral # Ralink Technology 802.11 wireless NIC
303 #device rtw # RealTek 802.11 wireless NIC
304 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
305 # exists only as a PCMCIA device, so there is no ISA attachment needed
306 # and resources will always be dynamically assigned by the pccard code.
309 # The probe order of these is presently determined by i386/isa/isa_compat.c.
310 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
311 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
312 device lnc0 at isa? disable port 0x280 irq 10 drq 0
313 device cs0 at isa? disable port 0x300
314 device sn0 at isa? disable port 0x300 irq 10
316 # Pseudo devices - the number indicates how many units to allocate.
317 pseudo-device loop # Network loopback
318 pseudo-device ether # Ethernet support
319 pseudo-device sl 1 # Kernel SLIP
320 pseudo-device ppp 1 # Kernel PPP
321 pseudo-device tun # Packet tunnel.
322 pseudo-device pty # Pseudo-ttys (telnet etc)
323 pseudo-device md # Memory "disks"
324 pseudo-device gif # IPv6 and IPv4 tunneling
325 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
327 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
328 # Be aware of the administrative consequences of enabling this!
329 pseudo-device bpf #Berkeley packet filter
331 pseudo-device crypto # core crypto support, used by wlan
332 pseudo-device cryptodev
335 device uhci # UHCI PCI->USB interface
336 device ohci # OHCI PCI->USB interface
337 device usb # USB Bus (required)
338 device ugen # Generic
339 device uhid # "Human Interface Devices"
340 device ukbd # Keyboard
341 device ulpt # Printer
342 device umass # Disks/Mass storage - Requires scbus and da
344 device uscanner # Scanners
345 device urio # Diamond Rio MP3 Player
346 # USB Ethernet, requires mii
347 device aue # ADMtek USB ethernet
348 device axe # ASIX Electronics USB Ethernet
349 device cue # CATC USB ethernet
350 device kue # Kawasaki LSI USB ethernet
351 device rue # RealTek 8150 based USB ethernet
352 # USB wireless NICs, requires wlan, wlan_amrr
353 #device rum # Ralink Technology RT2501USB/RT2601USB
354 #device ural # Ralink Technology RT2500USB
357 device firewire # FireWire bus code
358 device sbp # SCSI over FireWire (Requires scbus and da)
359 device fwe # Ethernet over FireWire (non-standard!)