| blob | 1fe40b99564bda8b16da500b48b8b1d8dbf3abad |
1 # $NetBSD: rc.subr,v 1.49 2002/05/21 12:31:01 lukem Exp $
2 # $FreeBSD: src/etc/rc.subr,v 1.13 2003/06/09 17:31:06 mtm Exp $
3 #
4 # Copyright (c) 1997-2002 The NetBSD Foundation, Inc.
5 # All rights reserved.
6 #
7 # This code is derived from software contributed to The NetBSD Foundation
8 # by Luke Mewburn.
9 #
10 # Redistribution and use in source and binary forms, with or without
11 # modification, are permitted provided that the following conditions
12 # are met:
13 # 1. Redistributions of source code must retain the above copyright
14 # notice, this list of conditions and the following disclaimer.
15 # 2. Redistributions in binary form must reproduce the above copyright
16 # notice, this list of conditions and the following disclaimer in the
17 # documentation and/or other materials provided with the distribution.
18 # 3. All advertising materials mentioning features or use of this software
19 # must display the following acknowledgement:
20 # This product includes software developed by the NetBSD
21 # Foundation, Inc. and its contributors.
22 # 4. Neither the name of The NetBSD Foundation nor the names of its
23 # contributors may be used to endorse or promote products derived
24 # from this software without specific prior written permission.
25 #
26 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 # POSSIBILITY OF SUCH DAMAGE.
37 #
38 # rc.subr
39 # functions used by various rc scripts
40 #
42 #
43 # Operating System dependent/independent variables
44 #
46 if [ "X$_file" = "X" ]; then
47 _file=$0
48 fi
50 provide_list=`rcorder -p $_file`
52 SYSCTL="/sbin/sysctl"
53 SYSCTL_N="${SYSCTL} -n"
54 CMD_OSTYPE="${SYSCTL_N} kern.ostype"
55 OSTYPE=`${CMD_OSTYPE}`
57 RC_RUNNING=0
58 RC_FAILED=1
59 RC_DISABLED=2
60 RC_IRRELEVANT=3
61 RC_CONFIGURED=4
62 RC_STOPPED=5
63 SYSCTL_W="${SYSCTL}"
65 #
66 # functions
67 # ---------
69 #
70 # set_rcvar base_var
71 # Set the variable name enabling a specific service.
72 # FreeBSD uses ${service}_enable, while NetBSD uses
73 # just the name of the service. For example:
74 # FreeBSD: sendmail_enable="YES"
75 # NetBSD : sendmail="YES"
76 # $1 - if $name is not the base to work of off, specify
77 # a different one
78 #
79 set_rcvar()
80 {
81 if [ -z "$1" ]; then
82 base_var=${name}
83 else
84 base_var="$1"
85 fi
87 echo ${base_var}
88 }
90 # set_provide_list
91 #
92 # $1 should be $rc_arg (start, stop, restart, reload, etc)
93 # $2 return value $RC_*
94 #
95 # Set the rcng_* variables associated with elements in provide_list
96 # based on $1 and $2.
97 #
98 # Returns non-zero when early termination should occur, in which
99 # case the caller should return with a value of $? - 1
100 #
101 set_provide_list()
102 {
103 # Remember, plret is set to the early termination return code + 1,
104 # or 0 if we want to continue the operation.
105 #
106 for i in $provide_list; do
107 case $1$2 in
108 start$RC_RUNNING|restart$RC_RUNNING)
109 varsym -s rcng_$i=running
110 ;;
111 start$RC_FAILED|restart$RC_FAILED)
112 varsym -s rcng_$i=failed
113 ;;
114 start$RC_DISABLED|restart$RC_DISABLED|reload$RC_DISABLED)
115 varsym -s rcng_$i=disabled
116 ;;
117 start$RC_IRRELEVANT|restart$RC_IRRELEVANT|reload$RC_IRRELEVANT)
118 varsym -s rcng_$i=irrelevant
119 ;;
120 start$RC_CONFIGURED|restart$RC_CONFIGURED)
121 varsym -s rcng_$i=configured
122 ;;
123 stop$RC_DISABLED)
124 varsym -s rcng_$i=disabled
125 ;;
126 stop$RC_IRRELEVANT)
127 varsym -s rcng_$i=irrelevant
128 ;;
129 stop*)
130 varsym -s rcng_$i=stopped
131 ;;
132 *)
133 ;;
134 esac
135 done
136 }
138 # check_early_term
139 # $1 should be $rc_arg (start, stop, restart, reload, etc)
140 # $2 return value $RC_*
141 # $3 $rc_force "" not to force, "anything" to force.
142 #
143 # The return code is 0 if early termination is not to occur, non-zero if
144 # it is to occur. When early termination is to occur the caller should
145 # return check_early_term()'s return code - 1. That is, early termination
146 # can occur with or without an error.
147 #
148 # The provide list will be adjusted when early termination occurs.
149 #
150 check_early_term()
151 {
152 case $2 in
153 $RC_RUNNING)
154 return 0
155 ;;
156 $RC_FAILED)
157 set_provide_list $1 $2
158 [ -z "$3" ] || return 0
159 return 2
160 ;;
161 $RC_DISABLED)
162 set_provide_list $1 $2
163 [ -z "$3" ] || return 0
164 return 1
165 ;;
166 $RC_IRRELEVANT)
167 set_provide_list $1 $2
168 [ -z "$3" ] || return 0
169 return 1
170 ;;
171 $RC_CONFIGURED)
172 return 0
173 ;;
174 $RC_STOPPED)
175 return 0
176 ;;
177 esac
178 set_provide_list $1 $2
179 [ -z "$3" ] || return 0
180 return 2
181 }
183 # adjust_return_code $1
184 #
185 # Convert the return code to an exit code of 0 (success) or 1 (failure)
186 #
187 adjust_return_code()
188 {
189 if [ $1 = $RC_FAILED ]; then
190 return 1
191 fi
192 return 0
193 }
195 #
196 # force_depend script
197 # Force a service to start. Intended for use by services
198 # to resolve dependency issues. It is assumed the caller
199 # has check to make sure this call is necessary
200 # $1 - filename of script, in /etc/rc.d, to run
201 #
202 force_depend()
203 {
204 _depend="$1"
206 info "${name} depends on ${_depend}, which will be forced to start."
207 if ! /etc/rc.d/${_depend} forcestart ; then
208 warn "Unable to force ${_depend}. It may already be running."
209 return 1
210 fi
211 return 0
212 }
214 #
215 # checkyesno var
216 # Test $1 variable, and warn if not set to YES or NO.
217 # Return 0 if it's "yes" (et al), nonzero otherwise.
218 #
219 checkyesno()
220 {
221 # try foo
222 eval _value=\$${1%_enable}
223 # try foo_enable
224 if [ -z $_value ]
225 then
226 eval _value=\$${1%_enable}_enable;
227 fi
228 debug "checkyesno: $1 is set to $_value."
229 case $_value in
231 # "yes", "true", "on", or "1"
232 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
233 return 0
234 ;;
236 # "no", "false", "off", or "0"
237 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
238 return 1
239 ;;
240 *)
241 warn "\$${1} is not set properly - see rc.conf(5)."
242 return 1
243 ;;
244 esac
245 }
247 # reverse_list list
248 # print the list in reverse order
249 #
250 reverse_list()
251 {
252 _revlist=
253 for _revfile in $*; do
254 _revlist="$_revfile $_revlist"
255 done
256 echo $_revlist
257 }
259 #
260 # mount_critical_filesystems type
261 # Go through the list of critical filesystems as provided in
262 # the rc.conf(5) variable $critical_filesystems_${type}, checking
263 # each one to see if it is mounted, and if it is not, mounting it.
264 #
265 mount_critical_filesystems()
266 {
267 eval _fslist=\$critical_filesystems_${1}
268 for _fs in $_fslist; do
269 mount | (
270 _ismounted=no
271 while read what _on on _type type; do
272 if [ $on = $_fs ]; then
273 _ismounted=yes
274 fi
275 done
276 if [ $_ismounted = no ]; then
277 mount $_fs >/dev/null 2>&1
278 fi
279 )
280 done
281 }
283 #
284 # check_pidfile pidfile procname [interpreter]
285 # Parses the first line of pidfile for a PID, and ensures
286 # that the process is running and matches procname.
287 # Prints the matching PID upon success, nothing otherwise.
288 # interpreter is optional; see _find_processes() for details.
289 #
290 check_pidfile()
291 {
292 _pidfile=$1
293 _procname=$2
294 _interpreter=$3
295 if [ -z "$_pidfile" -o -z "$_procname" ]; then
296 err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
297 fi
298 if [ ! -f $_pidfile ]; then
299 debug "pid file {$_pidfile): not readable."
300 return
301 fi
302 read _pid _junk < $_pidfile
303 if [ -z "$_pid" ]; then
304 debug "pid file {$_pidfile): no pid in file."
305 return
306 fi
307 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
308 }
310 #
311 # check_process procname [interpreter]
312 # Ensures that a process (or processes) named procname is running.
313 # Prints a list of matching PIDs.
314 # interpreter is optional; see _find_processes() for details.
315 #
316 check_process()
317 {
318 _procname=$1
319 _interpreter=$2
320 if [ -z "$_procname" ]; then
321 err 3 'USAGE: check_process procname [interpreter]'
322 fi
323 _find_processes $_procname ${_interpreter:-.} '-ax'
324 }
326 #
327 # _find_processes procname interpreter psargs
328 # Search for procname in the output of ps generated by psargs.
329 # Prints the PIDs of any matching processes, space separated.
330 #
331 # If interpreter == ".", check the following variations of procname
332 # against the first word of each command:
333 # procname
334 # `basename procname`
335 # `basename procname` + ":"
336 # "(" + `basename procname` + ")"
337 #
338 # If interpreter != ".", read the first line of procname, remove the
339 # leading #!, normalise whitespace, append procname, and attempt to
340 # match that against each command, either as is, or with extra words
341 # at the end.
342 #
343 _find_processes()
344 {
345 if [ $# -ne 3 ]; then
346 err 3 'USAGE: _find_processes procname interpreter psargs'
347 fi
348 _procname=$1
349 _interpreter=$2
350 _psargs=$3
352 _pref=
353 if [ $_interpreter != "." ]; then # an interpreted script
354 read _interp < $_procname # read interpreter name
355 _interp=${_interp#\#!} # strip #!
356 set -- $_interp
357 if [ $_interpreter != $1 ]; then
358 warn "\$command_interpreter $_interpreter != $1"
359 fi
360 _interp="$* $_procname" # cleanup spaces, add _procname
361 _interpbn="$1" # the interpreter binary
362 _fp_args='_argv'
363 _fp_match='case "$_argv" in
364 "${_interpbn##*/}: "$_procname*|${_interp}|"${_interp} "*)'
365 else # a normal daemon
366 _procnamebn=${_procname##*/}
367 _fp_args='_arg0 _argv'
368 _fp_match='case "$_arg0" in
369 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")'
370 fi
372 _proccheck='
373 ps -o "pid,command" '"$_psargs"' |
374 while read _npid '"$_fp_args"'; do
375 case "$_npid" in
376 PID)
377 continue ;;
378 esac ; '"$_fp_match"'
379 echo -n "$_pref$_npid" ;
380 _pref=" "
381 ;;
382 esac
383 done'
385 # debug "in _find_processes: proccheck is ($_proccheck)."
386 eval $_proccheck
387 }
389 #
390 # wait_for_pids pid [pid ...]
391 # spins until none of the pids exist
392 #
393 wait_for_pids()
394 {
395 _list=$*
396 if [ -z "$_list" ]; then
397 return
398 fi
399 _prefix=
400 while true; do
401 _nlist="";
402 for _j in $_list; do
403 if kill -0 $_j 2>/dev/null; then
404 _nlist="${_nlist}${_nlist:+ }$_j"
405 fi
406 done
407 if [ -z "$_nlist" ]; then
408 break
409 fi
410 _list=$_nlist
411 echo -n ${_prefix:-"Waiting for PIDS: "}$_list
412 _prefix=", "
413 sleep 2
414 done
415 if [ -n "$_prefix" ]; then
416 echo "."
417 fi
418 }
420 #
421 # get_pidfile_from_conf string file
422 #
423 # Takes a string to search for in the specified file.
424 # Ignores lines with traditional comment characters.
425 #
426 # Example:
427 #
428 # if get_pidfile_from_conf string file; then
429 # pidfile="$_pidfile_from_conf"
430 # else
431 # pidfile='appropriate default'
432 # fi
433 #
434 get_pidfile_from_conf()
435 {
436 if [ -z "$1" -o -z "$2" ]; then
437 err 3 "USAGE: get_pidfile_from_conf string file ($name)"
438 fi
440 local string file line
442 string="$1" ; file="$2"
444 if [ ! -s "$file" ]; then
445 err 3 "get_pidfile_from_conf: $file does not exist ($name)"
446 fi
448 while read line; do
449 case "$line" in
450 *[#\;]*${string}*) continue ;;
451 *${string}*) break ;;
452 esac
453 done < $file
455 if [ -n "$line" ]; then
456 line=${line#*/}
457 _pidfile_from_conf="/${line%%[\"\;]*}"
458 else
459 return 1
460 fi
461 }
463 #
464 # check_startmsgs
465 # If rc_quiet is set (usually as a result of using faststart at
466 # boot time) check if rc_startmsgs is enabled.
467 #
468 check_startmsgs()
469 {
470 if [ -n "$rc_quiet" ]; then
471 checkyesno rc_startmsgs
472 else
473 return 0
474 fi
475 }
477 #
478 # run_rc_command argument
479 # Search for argument in the list of supported commands, which is:
480 # "start stop restart rcvar status poll ${extra_commands}"
481 # If there's a match, run ${argument}_cmd or the default method
482 # (see below).
483 #
484 # If argument has a given prefix, then change the operation as follows:
485 # Prefix Operation
486 # ------ ---------
487 # fast Skip the pid check, and set rc_fast=yes, rc_quiet=yes
488 # force Set ${rcvar} to YES, and set rc_force=yes
489 # one Set ${rcvar} to YES
490 # quiet Don't output some diagnostics, and set rc_quiet=yes
491 #
492 # The following globals are used:
493 #
494 # Name Needed Purpose
495 # ---- ------ -------
496 # provide_list (gen) list of keywords provided by current rcng file
497 #
498 # name y Name of script.
499 #
500 # command n Full path to command.
501 # Not needed if ${rc_arg}_cmd is set for
502 # each keyword.
503 #
504 # command_args n Optional args/shell directives for command.
505 #
506 # command_interpreter n If not empty, command is interpreted, so
507 # call check_{pidfile,process}() appropriately.
508 #
509 # extra_commands n List of extra commands supported.
510 #
511 # pidfile n If set, use check_pidfile $pidfile $command,
512 # otherwise use check_process $command.
513 # In either case, only check if $command is set.
514 #
515 # procname n Process name to check for instead of $command.
516 #
517 # rcvar n This is checked with checkyesno to determine
518 # if the action should be run.
519 #
520 # ${name}_chroot n Directory to chroot to before running ${command}
521 # Requires /usr to be mounted.
522 #
523 # ${name}_chdir n Directory to cd to before running ${command}
524 # (if not using ${name}_chroot).
525 #
526 # ${name}_flags n Arguments to call ${command} with.
527 # NOTE: $flags from the parent environment
528 # can be used to override this.
529 #
530 # ${name}_nice n Nice level to run ${command} at.
531 #
532 # ${name}_user n User to run ${command} as, using su(1) if not
533 # using ${name}_chroot.
534 # Requires /usr to be mounted.
535 #
536 # ${name}_group n Group to run chrooted ${command} as.
537 # Requires /usr to be mounted.
538 #
539 # ${name}_groups n Comma separated list of supplementary groups
540 # to run the chrooted ${command} with.
541 # Requires /usr to be mounted.
542 #
543 # ${rc_arg}_cmd n If set, use this as the method when invoked;
544 # Otherwise, use default command (see below)
545 #
546 # ${rc_arg}_precmd n If set, run just before performing the
547 # ${rc_arg}_cmd method in the default
548 # operation (i.e, after checking for required
549 # bits and process (non)existence).
550 # If this completes with a non-zero exit code,
551 # don't run ${rc_arg}_cmd.
552 #
553 # ${rc_arg}_postcmd n If set, run just after performing the
554 # ${rc_arg}_cmd method, if that method
555 # returned a zero exit code.
556 #
557 # required_dirs n If set, check for the existence of the given
558 # directories before running the default
559 # (re)start command.
560 #
561 # required_files n If set, check for the readability of the given
562 # files before running the default (re)start
563 # command.
564 #
565 # required_modules n If set, ensure the given kernel modules are
566 # loaded before running a (re)start command.
567 # The check and possible loads are actually
568 # done after start_precmd so that the modules
569 # aren't loaded in vain, should the precmd
570 # return a non-zero status to indicate a error.
571 # If a word in the list looks like "foo:bar",
572 # "foo" is the KLD file name and "bar" is the
573 # module name. If a word looks like "foo~bar",
574 # "foo" is the KLD file name and "bar" is a
575 # egrep(1) pattern matching the module name.
576 # Otherwise the module name is assumed to be
577 # the same as the KLD file name, which is most
578 # common. See load_kld().
579 #
580 # required_vars n If set, perform checkyesno on each of the
581 # listed variables before running the default
582 # (re)start command.
583 #
584 # Default behaviour for a given argument, if no override method is
585 # provided:
586 #
587 # Argument Default behaviour
588 # -------- -----------------
589 # start if !running && checkyesno ${rcvar}
590 # ${command}
591 #
592 # stop if ${pidfile}
593 # rc_pid=$(check_pidfile $pidfile $command)
594 # else
595 # rc_pid=$(check_process $command)
596 # kill $sig_stop $rc_pid
597 # wait_for_pids $rc_pid
598 # ($sig_stop defaults to TERM.)
599 #
600 # reload Similar to stop, except use $sig_reload instead,
601 # and doesn't wait_for_pids.
602 # $sig_reload defaults to HUP.
603 #
604 # restart Run `stop' then `start'.
605 #
606 # status Show if ${command} is running, etc.
607 #
608 # poll Wait for ${command} to exit.
609 #
610 # rcvar Display what rc.conf variable is used (if any).
611 #
612 # Variables available to methods, and after run_rc_command() has
613 # completed:
614 #
615 # Variable Purpose
616 # -------- -------
617 # rc_arg Argument to command, after fast/force/one processing
618 # performed
619 #
620 # rc_flags Flags to start the default command with.
621 # Defaults to ${name}_flags, unless overridden
622 # by $flags from the environment.
623 # This variable may be changed by the precmd method.
624 #
625 # rc_pid PID of command (if appropriate)
626 #
627 # rc_fast Not empty if "fast" was provided (q.v.)
628 #
629 # rc_force Not empty if "force" was provided (q.v.)
630 #
631 # rc_quiet Not empty if "quiet" was provided
632 #
633 #
634 dummy_rc_command()
635 {
636 rc_arg=$1
638 case "$rc_arg" in
639 fast*) # "fast" prefix; don't check pid
640 rc_arg=${rc_arg#fast}
641 ;;
642 force*) # "force" prefix; always start
643 rc_arg=${rc_arg#force}
644 ;;
645 one*) # "one" prefix; set ${rcvar}=yes
646 rc_arg=${rc_arg#one}
647 ;;
648 esac
649 set_provide_list $rc_arg $RC_CONFIGURED
650 return 0
651 }
653 run_rc_command()
654 {
655 _return=0
656 rc_arg=$1
657 if [ -z "$name" ]; then
658 err 3 'run_rc_command: $name is not set.'
659 fi
661 # Don't repeat the first argument when passing additional command-
662 # line arguments to the command subroutines.
663 #
664 shift 1
665 rc_extra_args="$*"
667 case "$rc_arg" in
668 fast*) # "fast" prefix; don't check pid
669 rc_arg=${rc_arg#fast}
670 rc_fast=yes
671 rc_quiet=yes
672 ;;
673 force*) # "force" prefix; always start
674 rc_arg=${rc_arg#force}
675 rc_force=yes
676 if [ -n "${rcvar}" ]; then
677 eval ${rcvar}=YES
678 fi
679 ;;
680 one*) # "one" prefix; set ${rcvar}=yes
681 rc_arg=${rc_arg#one}
682 if [ -n "${rcvar}" ]; then
683 eval ${rcvar}=YES
684 fi
685 ;;
686 quiet*) # "quiet" prefix; omit some messages
687 _rc_prefix=quiet
688 rc_arg=${rc_arg#${_rc_prefix}}
689 rc_quiet=yes
690 ;;
691 esac
693 eval _override_command=\$${name}_program
694 if [ -n "$_override_command" ]; then
695 command=$_override_command
696 fi
698 _keywords="start stop restart rcvar $extra_commands"
699 rc_pid=
700 _pidcmd=
701 _procname=${procname:-${command}}
703 # setup pid check command if not fast
704 if [ -z "$rc_fast" -a -n "$_procname" ]; then
705 if [ -n "$pidfile" ]; then
706 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
707 else
708 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
709 fi
710 if [ -n "$_pidcmd" ]; then
711 _keywords="${_keywords} status poll"
712 fi
713 fi
715 if [ -z "$rc_arg" ]; then
716 rc_usage "$_keywords"
717 fi
719 if [ -n "$flags" ]; then # allow override from environment
720 rc_flags=$flags
721 else
722 eval rc_flags=\$${name}_flags
723 fi
724 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \
725 _nice=\$${name}_nice _user=\$${name}_user \
726 _group=\$${name}_group _groups=\$${name}_groups
728 if [ -n "$_user" ]; then # unset $_user if running as that user
729 if [ "$_user" = "$(id -un)" ]; then
730 unset _user
731 fi
732 fi
734 # if ${rcvar} is set, and $1 is not
735 # "rcvar", then run
736 # checkyesno ${rcvar}
737 # and return if that failed
738 #
739 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then
740 if ! checkyesno ${rcvar}; then
741 set_provide_list $rc_arg $RC_DISABLED
742 return 0
743 fi
744 fi
746 eval $_pidcmd # determine the pid if necessary
748 for _elem in $_keywords; do
749 if [ "$_elem" != "$rc_arg" ]; then
750 continue
751 fi
753 # if there's a custom ${XXX_cmd},
754 # run that instead of the default
755 #
756 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \
757 _postcmd=\$${rc_arg}_postcmd
758 if [ -n "$_cmd" ]; then
759 # if the precmd failed and force
760 # isn't set, exit
761 #
762 if [ -n "$_precmd" ]; then
763 debug "run_rc_command: evaluating ${_precmd}()."
764 eval $_precmd $rc_extra_args
766 _return=$?
767 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
768 fi
770 if [ -n "$_cmd" ]; then
771 debug "run_rc_command: evaluating ${_cmd}()."
772 eval $_cmd $rc_extra_args
773 _return=$?
774 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
775 fi
777 if [ -n "$_postcmd" ]; then
778 debug "run_rc_command: evaluating ${_postcmd}()."
779 eval $_postcmd $rc_extra_args
780 _return=$?
781 check_early_term $rc_arg $_return "" || return $(($?-1))
782 fi
783 set_provide_list $rc_arg $_return
784 adjust_return_code $_return
785 return $?
786 fi
788 case "$rc_arg" in # default operations...
790 status)
791 if [ -n "$rc_pid" ]; then
792 echo "${name} is running as pid $rc_pid."
793 else
794 echo "${name} is not running."
795 return 1
796 fi
797 ;;
799 start)
800 if [ -n "$rc_pid" ]; then
801 if [ -z "$rc_quiet" ]; then
802 echo "${name} already running? (pid=$rc_pid)."
803 fi
804 exit 1
805 fi
807 if [ ! -x $command ]; then
808 info "run_rc_command: cannot run ($command)."
809 set_provide_list $rc_arg $RC_FAILED
810 adjust_return_code $RC_FAILED
811 return $?
812 fi
814 # check for required variables,
815 # directories, and files
816 #
817 for _f in $required_vars; do
818 if ! checkyesno $_f; then
819 warn "\$${_f} is not set."
820 if [ -z "$rc_force" ]; then
821 set_provide_list $rc_arg $RC_FAILED
822 adjust_return_code $RC_FAILED
823 return $?
824 fi
825 fi
826 done
827 for _f in $required_dirs; do
828 if [ ! -d "${_f}/." ]; then
829 warn "${_f} is not a directory."
830 if [ -z "$rc_force" ]; then
831 set_provide_list $rc_arg $RC_FAILED
832 adjust_return_code $RC_FAILED
833 return $?
834 fi
835 fi
836 done
837 for _f in $required_files; do
838 if [ ! -r "${_f}" ]; then
839 warn "${_f} is not readable."
840 if [ -z "$rc_force" ]; then
841 set_provide_list $rc_arg $RC_FAILED
842 adjust_return_code $RC_FAILED
843 return $?
844 fi
845 fi
846 done
847 for _f in $required_modules; do
848 case "${_f}" in
849 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;;
850 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;;
851 *) _args="${_f}" ;;
852 esac
853 if ! load_kld ${_args}; then
854 if [ -z "$rc_force" ]; then
855 set_provide_list $rc_arg $RC_FAILED
856 adjust_return_code $RC_FAILED
857 return $?
858 fi
859 fi
860 done
862 # if the precmd failed and force
863 # isn't set, exit
864 #
865 if [ -n "${_precmd}" ]; then
866 debug "run_rc_command: evaluating ${_precmd}()."
867 eval $_precmd
868 _return=$?
869 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
870 fi
872 # setup the command to run, and run it
873 #
874 echo "Starting ${name}."
875 if [ -n "$_chroot" ]; then
876 _doit="\
877 ${_nice:+nice -n $_nice }\
878 chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
879 $_chroot $command $rc_flags $command_args"
880 else
881 _doit="\
882 ${_chdir:+cd $_chdir; }\
883 ${_nice:+nice -n $_nice }\
884 $command $rc_flags $command_args"
885 if [ -n "$_user" ]; then
886 _doit="su -m $_user -c 'sh -c \"$_doit\"'"
887 fi
888 fi
890 # if the cmd failed and force
891 # isn't set, exit
892 #
893 debug "run_rc_command: _doit: $_doit"
894 eval $_doit
895 _return=$?
896 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
897 # finally, run postcmd
898 #
899 if [ -n "${_postcmd}" ]; then
900 debug "run_rc_command: evaluating ${_postcmd}()."
901 eval $_postcmd
902 fi
903 ;;
905 stop)
906 if [ -z "$rc_pid" ]; then
907 if [ -n "$pidfile" ]; then
908 echo \
909 "${name} not running? (check $pidfile)."
910 else
911 echo "${name} not running?"
912 fi
913 set_provide_list $rc_arg $RC_STOPPED
914 exit 1
915 fi
917 # if the precmd failed and force
918 # isn't set, exit
919 #
920 if [ -n "$_precmd" ]; then
921 eval $_precmd
922 _return=$?
923 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
924 fi
926 # send the signal to stop
927 #
928 echo "Stopping ${name}."
929 _doit="kill -${sig_stop:-TERM} $rc_pid"
930 if [ -n "$_user" ]; then
931 _doit="su -m $_user -c 'sh -c \"$_doit\"'"
932 fi
934 # if the stop cmd failed and force
935 # isn't set, exit
936 #
937 eval $_doit
938 _return=$?
939 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
940 # wait for the command to exit,
941 # and run postcmd.
942 sleep 0.1
943 wait_for_pids $rc_pid
944 if [ -n "$_postcmd" ]; then
945 eval $_postcmd
946 _return=$?
947 fi
948 ;;
950 reload)
951 if [ -z "$rc_pid" ]; then
952 if [ -n "$pidfile" ]; then
953 echo \
954 "${name} not running? (check $pidfile)."
955 else
956 echo "${name} not running?"
957 fi
958 set_provide_list $rc_arg $RC_FAILED
959 exit 1
960 fi
961 echo "Reloading ${name} config files."
962 if [ -n "$_precmd" ]; then
963 eval $_precmd
964 _return=$?
965 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
966 fi
967 _doit="kill -${sig_reload:-HUP} $rc_pid"
968 if [ -n "$_user" ]; then
969 _doit="su -m $_user -c 'sh -c \"$_doit\"'"
970 fi
971 eval $_doit
972 _return=$?
973 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
974 if [ -n "$_postcmd" ]; then
975 eval $_postcmd
976 _return=$?
977 fi
978 ;;
980 restart)
981 if [ -n "$_precmd" ]; then
982 eval $_precmd $rc_extra_args
983 _return=$?
984 check_early_term $rc_arg $_return "$rc_force" || return $(($?-1))
985 fi
986 # prevent restart being called more
987 # than once by any given script
988 #
989 if [ -n "$_rc_restart_done" ]; then
990 return 0
991 fi
992 _rc_restart_done=YES
994 ( $0 ${rc_force:+force}stop $rc_extra_args )
995 $0 ${rc_force:+force}start $rc_extra_args
996 _return=$?
998 if [ -n "$_postcmd" ]; then
999 eval $_postcmd $rc_extra_args
1000 adjust_return_code $?
1001 _return=$?
1002 fi
1003 # Do not set_provide_list(), the start command above
1004 # will have done it for us and we do not know the
1005 # actual RC code to base a setting on here.
1006 #
1007 return $_return
1008 ;;
1010 poll)
1011 if [ -n "$rc_pid" ]; then
1012 wait_for_pids $rc_pid
1013 fi
1014 ;;
1016 rcvar)
1017 echo "# $name"
1018 if [ -n "$rcvar" ]; then
1019 if checkyesno ${rcvar}; then
1020 echo "\$${rcvar}=YES"
1021 else
1022 echo "\$${rcvar}=NO"
1023 fi
1024 fi
1025 ;;
1027 *)
1028 rc_usage "$_keywords"
1029 ;;
1031 esac
1032 set_provide_list $rc_arg $_return
1033 adjust_return_code $_return
1034 return $?
1035 done
1037 echo 1>&2 "$0: unknown directive '$rc_arg'."
1038 rc_usage "$_keywords"
1039 exit 1
1040 }
1042 #
1043 # run_rc_script file arg
1044 # Start the script `file' with `arg', and correctly handle the
1045 # return value from the script. If `file' ends with `.sh', it's
1046 # sourced into the current environment. If `file' appears to be
1047 # a backup or scratch file, ignore it. Otherwise if it's
1048 # executable run as a child process.
1049 #
1050 run_rc_script()
1051 {
1052 _file=$1
1053 _arg=$2
1054 if [ -z "$_file" -o -z "$_arg" ]; then
1055 err 3 'USAGE: run_rc_script file arg'
1056 fi
1058 trap "echo 'Reboot interrupted'; exit 1" 3
1060 unset name command command_args command_interpreter \
1061 extra_commands pidfile procname \
1062 rcvar required_dirs required_files required_vars
1063 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd
1065 case "$_file" in
1066 *.sh) # run in current shell
1067 set $_arg ; . $_file
1068 ;;
1069 *[~#]|*.OLD|*.orig) # scratch file; skip
1070 warn "Ignoring scratch file $_file"
1071 ;;
1072 *) # run in subshell
1073 if [ -x $_file ]; then
1074 if [ -n "$rc_fast_and_loose" ]; then
1075 set $_arg ; . $_file
1076 else
1077 ( trap "echo 'Reboot interrupted'; exit 1" 3
1078 set $_arg ; . $_file )
1079 fi
1080 fi
1081 ;;
1082 esac
1083 }
1085 # Code common to scripts that need to load a kernel module
1086 # if it isn't in the kernel yet. Syntax:
1087 # load_kld [-e regex] [-m module] file
1088 # where -e or -m chooses the way to check if the module
1089 # is already loaded:
1090 # regex is egrep'd in the output from `kldstat -v',
1091 # module is passed to `kldstat -m'.
1092 # The default way is as though `-m file' were specified.
1093 load_kld()
1094 {
1095 local _loaded _mod _opt _re
1097 while getopts "e:m:" _opt; do
1098 case "$_opt" in
1099 e) _re="$OPTARG" ;;
1100 m) _mod="$OPTARG" ;;
1101 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;;
1102 esac
1103 done
1104 shift $(($OPTIND - 1))
1105 if [ $# -ne 1 ]; then
1106 err 3 'USAGE: load_kld [-e regex] [-m module] file'
1107 fi
1108 _mod=${_mod:-$1}
1109 _loaded=false
1110 if [ -n "$_re" ]; then
1111 if kldstat -v | egrep -q -e "$_re"; then
1112 _loaded=true
1113 fi
1114 else
1115 if kldstat -q -m "$_mod"; then
1116 _loaded=true
1117 fi
1118 fi
1119 if ! $_loaded; then
1120 if ! kldload "$1"; then
1121 warn "Unable to load kernel module $1"
1122 return 1
1123 else
1124 info "$1 kernel module loaded."
1125 fi
1126 else
1127 debug "load_kld: $1 kernel module already loaded."
1128 fi
1129 return 0
1130 }
1133 # ltr str src dst
1134 # Change every $src in $str to $dst.
1135 # Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor
1136 # awk(1).
1137 ltr()
1138 {
1139 local _str _src _dst _out _com
1140 _str=$1
1141 _src=$2
1142 _dst=$3
1143 _out=""
1145 IFS=${_src}
1146 for _com in ${_str}; do
1147 if [ -z "${_out}" ]; then
1148 _out="${_com}"
1149 else
1150 _out="${_out}${_dst}${_com}"
1151 fi
1152 done
1153 echo "${_out}"
1154 }
1156 #
1157 # load_rc_config
1158 # Source in the configuration file for a given command.
1159 #
1160 load_rc_config()
1161 {
1162 _command=$1
1163 if [ -z "$_command" ]; then
1164 err 3 'USAGE: load_rc_config command'
1165 fi
1167 if [ -z "$_rc_conf_loaded" ]; then
1168 if [ -r /etc/defaults/rc.conf ]; then
1169 debug "Sourcing /etc/defaults/rc.conf"
1170 . /etc/defaults/rc.conf
1171 source_rc_confs
1172 elif [ -r /etc/rc.conf ]; then
1173 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)."
1174 . /etc/rc.conf
1175 fi
1176 _rc_conf_loaded=YES
1177 fi
1178 if [ -f /etc/rc.conf.d/"$_command" ]; then
1179 debug "Sourcing /etc/rc.conf.d/${_command}"
1180 . /etc/rc.conf.d/"$_command"
1181 fi
1183 # XXX - Deprecated variable name support
1184 #
1185 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable"
1186 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program"
1187 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags"
1188 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable"
1189 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program"
1190 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags"
1192 }
1194 #
1195 # rc_usage commands
1196 # Print a usage string for $0, with `commands' being a list of
1197 # valid commands.
1198 #
1199 rc_usage()
1200 {
1201 echo -n 1>&2 "Usage: $0 [fast|force|one|quiet]("
1203 _sep=
1204 for _elem in $*; do
1205 echo -n 1>&2 "$_sep$_elem"
1206 _sep="|"
1207 done
1208 echo 1>&2 ")"
1209 exit 1
1210 }
1212 #
1213 # err exitval message
1214 # Display message to stderr and log to the syslog, and exit with exitval.
1215 #
1216 err()
1217 {
1218 exitval=$1
1219 shift
1221 if [ -x /usr/bin/logger ]; then
1222 logger "$0: ERROR: $*"
1223 fi
1224 echo 1>&2 "$0: ERROR: $*"
1225 exit $exitval
1226 }
1228 #
1229 # warn message
1230 # Display message to stderr and log to the syslog.
1231 #
1232 warn()
1233 {
1234 if [ -x /usr/bin/logger ]; then
1235 logger "$0: WARNING: $*"
1236 fi
1237 echo 1>&2 "$0: WARNING: $*"
1238 }
1240 #
1241 # info message
1242 # Display informational message to stdout and log to syslog.
1243 #
1244 info()
1245 {
1246 case ${rc_info} in
1247 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1248 if [ -x /usr/bin/logger ]; then
1249 logger "$0: INFO: $*"
1250 fi
1251 echo "$0: INFO: $*"
1252 ;;
1253 esac
1254 }
1256 #
1257 # debug message
1258 # If debugging is enabled in rc.conf output message to stderr.
1259 # BEWARE that you don't call any subroutine that itself calls this
1260 # function.
1261 #
1262 debug()
1263 {
1264 case ${rc_debug} in
1265 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1266 if [ -x /usr/bin/logger ]; then
1267 logger "$0: INFO: $*"
1268 fi
1269 echo 1>&2 "$0: DEBUG: $*"
1270 ;;
1271 esac
1272 }
1274 #
1275 # backup_file action file cur backup
1276 # Make a backup copy of `file' into `cur', and save the previous
1277 # version of `cur' as `backup' or use rcs for archiving.
1278 #
1279 # This routine checks the value of the backup_uses_rcs variable,
1280 # which can be either YES or NO.
1281 #
1282 # The `action' keyword can be one of the following:
1283 #
1284 # add `file' is now being backed up (and is possibly
1285 # being reentered into the backups system). `cur'
1286 # is created and RCS files, if necessary, are
1287 # created as well.
1288 #
1289 # update `file' has changed and needs to be backed up.
1290 # If `cur' exists, it is copied to to `back' or
1291 # checked into RCS (if the repository file is old),
1292 # and then `file' is copied to `cur'. Another RCS
1293 # check in done here if RCS is being used.
1294 #
1295 # remove `file' is no longer being tracked by the backups
1296 # system. If RCS is not being used, `cur' is moved
1297 # to `back', otherwise an empty file is checked in,
1298 # and then `cur' is removed.
1299 #
1300 #
1301 backup_file()
1302 {
1303 _action=$1
1304 _cpfile=$2
1305 _cur=$3
1306 _back=$4
1308 if checkyesno backup_uses_rcs; then
1309 _msg0="backup archive"
1310 _msg1="update"
1312 # ensure that history file is not locked
1313 if [ -f $_cur,v ]; then
1314 rcs -q -u -U -M $_cur
1315 fi
1317 # ensure after switching to rcs that the
1318 # current backup is not lost
1319 if [ -f $_cur ]; then
1320 # no archive, or current newer than archive
1321 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then
1322 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1323 rcs -q -kb -U $_cur
1324 co -q -f -u $_cur
1325 fi
1326 fi
1328 case $_action in
1329 add|update)
1330 cp -p $_cpfile $_cur
1331 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1332 rcs -q -kb -U $_cur
1333 co -q -f -u $_cur
1334 chown root:wheel $_cur $_cur,v
1335 ;;
1336 remove)
1337 cp /dev/null $_cur
1338 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1339 rcs -q -kb -U $_cur
1340 chown root:wheel $_cur $_cur,v
1341 rm $_cur
1342 ;;
1343 esac
1344 else
1345 case $_action in
1346 add|update)
1347 if [ -f $_cur ]; then
1348 cp -p $_cur $_back
1349 fi
1350 cp -p $_cpfile $_cur
1351 chown root:wheel $_cur
1352 ;;
1353 remove)
1354 mv -f $_cur $_back
1355 ;;
1356 esac
1357 fi
1358 }
1360 # devfs_mount_jail dir
1361 # Mounts a devfs file system appropriate for jails
1362 # on the directory dir.
1363 # This function returns non-zero if an error occurs.
1364 #
1365 devfs_mount_jail()
1366 {
1367 local jdev _me
1368 jdev="$1"
1369 _me="devfs_mount_jail"
1371 if ! devfs_domount "$jdev" $rs; then
1372 warn "$_me: devfs was not mounted on $jdev"
1373 return 1
1374 fi
1375 return 0
1376 }
1378 # devfs_domount dir
1379 # Mount devfs on dir.
1380 # Returns 0 on success.
1381 #
1382 devfs_domount()
1383 {
1384 local devdir _me
1385 devdir="$1"
1386 _me="devfs_domount()"
1388 if [ -z "$devdir" ]; then
1389 warn "$_me: you must specify a mount-point"
1390 return 1
1391 fi
1393 debug "$_me: mount-point is ($devdir)"
1394 if ! mount -t devfs devfs "$devdir"; then
1395 warn "$_me: Unable to mount devfs on $devdir"
1396 return 1
1397 fi
1399 return 0
1400 }
1402 # Find scripts in local_startup directories.
1403 find_local_scripts() {
1404 local_rc=''
1405 for dir in ${local_startup}; do
1406 if [ -d "${dir}" ]; then
1407 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do
1408 case "$file" in
1409 *.sample) ;;
1410 *) if [ -x "$file" ]; then
1411 local_rc="${local_rc} ${file}"
1412 fi
1413 ;;
1414 esac
1415 done
1416 fi
1417 done
1418 }