1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
3 # On the handling of kernel options
5 # All kernel options should be listed in LINT64, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT64 should compile as much code
8 # as possible. Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test. If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT64 to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options". Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files. Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
33 # Adaptec Array Controller driver options
36 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
41 #options for ACPI support
43 ACPI_NO_SEMAPHORES opt_acpi.h
44 ACPI_ENABLE_PCI opt_acpi.h
46 # Miscellaneous options.
47 COMPILING_LINT opt_lint.h
50 DDB_UNATTENDED opt_ddb.h
51 GDB_REMOTE_CHAT opt_ddb.h
82 # POSIX kernel options
83 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
85 # Do we want the config file compiled into the kernel?
86 INCLUDE_CONFIG_FILE opt_config.h
88 # Options for static file systems. These should only be used at config
89 # time, since the corresponding lkms cannot work if there are any static
90 # dependencies. Unusability is enforced by hiding the defines for the
91 # options in a never-included header.
106 # These static filesystems has one slightly bogus static dependency in
107 # sys/platform/.../i386/autoconf.c. If any of these filesystems are
108 # statically compiled into the kernel, code for mounting them as root
109 # filesystems will be enabled - but look below. Boot-code is purposely
110 # unavailable for the LKM-based versions.
115 # filesystems and libiconv bridge
116 CD9660_ICONV opt_dontuse.h
117 MSDOSFS_ICONV opt_dontuse.h
118 NTFS_ICONV opt_dontuse.h
123 # If you are following the conditions in the copyright,
124 # you can enable soft-updates which will speed up a lot of things
125 # and make the system safer from crashes at the same time.
126 # otherwise a STUB module will be compiled in.
127 SOFTUPDATES opt_ffs.h
129 # Enable fast hash lookups for large directories on UFS-based filesystems.
130 UFS_DIRHASH opt_ufs.h
132 # The above static dependencies are planned removed, with a
133 # <filesystem>_ROOT option to control if it usable as root. This list
134 # allows these options to be present in config files already (though
135 # they won't make any difference yet).
137 NFS_ROOT opt_nfsroot.h
139 # Options used only in subr_param.c.
143 NMBCLUSTERS opt_param.h
145 VM_BCACHE_SIZE_MAX opt_param.h
146 VM_SWZONE_SIZE_MAX opt_param.h
152 # Generic SCSI options.
153 CAM_MAX_HIGHPOWER opt_cam.h
155 CAM_DEBUG_DELAY opt_cam.h
156 CAM_DEBUG_BUS opt_cam.h
157 CAM_DEBUG_TARGET opt_cam.h
158 CAM_DEBUG_LUN opt_cam.h
159 CAM_DEBUG_FLAGS opt_cam.h
160 SCSI_DELAY opt_scsi.h
161 SCSI_NO_SENSE_STRINGS opt_scsi.h
162 SCSI_NO_OP_STRINGS opt_scsi.h
165 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
167 # Options used only in cam/scsi/scsi_cd.c
168 CHANGER_MIN_BUSY_SECONDS opt_cd.h
169 CHANGER_MAX_BUSY_SECONDS opt_cd.h
171 # Options used only in cam/scsi/scsi_sa.c.
172 SA_IO_TIMEOUT opt_sa.h
173 SA_SPACE_TIMEOUT opt_sa.h
174 SA_REWIND_TIMEOUT opt_sa.h
175 SA_ERASE_TIMEOUT opt_sa.h
176 SA_1FM_AT_EOD opt_sa.h
178 # Options used only in cam/scsi/scsi_pt.c
179 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
181 # Options used only in cam/scsi/scsi_ses.c
182 SES_ENABLE_PASSTHROUGH opt_ses.h
184 # Options used in dev/sym/ (Symbios SCSI driver).
185 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
186 # Allows the ncr to take precedence
187 # 1 (1<<0) -> 810a, 860
188 # 2 (1<<1) -> 825a, 875, 885, 895
189 # 4 (1<<2) -> 895a, 896, 1510d
190 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
191 # disabled:0 (default), enabled:1
192 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
193 # disabled:0, enabled:1 (default)
194 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
195 # default:8, range:[1..64]
197 # Options used only in pci/ncr.c
198 SCSI_NCR_DEBUG opt_ncr.h
199 SCSI_NCR_MAX_SYNC opt_ncr.h
200 SCSI_NCR_MAX_WIDE opt_ncr.h
201 SCSI_NCR_MYADDR opt_ncr.h
203 # Options used only in pci/isp_pci.c
204 ISP_TARGET_MODE opt_isp.h
206 # Options used in the 'nata' ATA/ATAPI driver
207 ATA_STATIC_ID opt_ata.h
217 ALTQ_FAIRQ opt_altq.h
218 ALTQ_NOPCC opt_altq.h
219 ALTQ_DEBUG opt_altq.h
224 BOOTP_COMPAT opt_bootp.h
225 BOOTP_NFSROOT opt_bootp.h
226 BOOTP_WIRED_TO opt_bootp.h
228 MROUTING opt_mrouting.h
233 IPSEC_ESP opt_ipsec.h
234 IPSEC_DEBUG opt_ipsec.h
235 IPSEC_FILTERGIF opt_ipsec.h
236 FAST_IPSEC opt_ipsec.h
239 DUMMYNET_DEBUG opt_ipdn.h
240 IPFIREWALL opt_ipfw.h
241 IPFIREWALL3 opt_ipfw.h
242 IPFIREWALL_DEBUG opt_ipfw.h
243 IPFIREWALL_VERBOSE opt_ipfw.h
244 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
245 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
246 IPV6FIREWALL opt_ip6fw.h
247 IPV6FIREWALL_VERBOSE opt_ip6fw.h
248 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
249 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
253 PPP_BSDCOMP opt_ppp.h
254 PPP_DEFLATE opt_ppp.h
257 TCP_SIGNATURE opt_inet.h
258 TCP_DROP_SYNFIN opt_tcp_input.h
262 MBUF_STRESS_TEST opt_mbuf_stress_test.h
264 # (New netgraph, port still in progress)
266 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
267 # Each netgraph node type can be either be compiled into the kernel
268 # or loaded dynamically. To get the former, include the corresponding
269 # option below. Each type has its own man page, e.g. ng_async(4).
271 NETGRAPH7_DEBUG opt_netgraph.h
272 NETGRAPH7_ASYNC opt_netgraph.h
273 NETGRAPH7_ATMLLC opt_netgraph.h
274 NETGRAPH7_ATM_ATMPIF opt_netgraph.h
275 NETGRAPH7_BLUETOOTH opt_netgraph.h
276 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h
277 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h
278 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h
279 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h
280 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h
281 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h
282 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h
283 NETGRAPH7_BPF opt_netgraph.h
284 NETGRAPH7_BRIDGE opt_netgraph.h
285 NETGRAPH7_CAR opt_netgraph.h
286 NETGRAPH7_CISCO opt_netgraph.h
287 NETGRAPH7_DEFLATE opt_netgraph.h
288 NETGRAPH7_DEVICE opt_netgraph.h
289 NETGRAPH7_ECHO opt_netgraph.h
290 NETGRAPH7_EIFACE opt_netgraph.h
291 NETGRAPH7_ETF opt_netgraph.h
292 NETGRAPH7_ETHER opt_netgraph.h
293 NETGRAPH7_FEC opt_netgraph.h
294 NETGRAPH7_FRAME_RELAY opt_netgraph.h
295 NETGRAPH7_GIF opt_netgraph.h
296 NETGRAPH7_GIF_DEMUX opt_netgraph.h
297 NETGRAPH7_HOLE opt_netgraph.h
298 NETGRAPH7_HUB opt_netgraph.h
299 NETGRAPH7_IFACE opt_netgraph.h
300 NETGRAPH7_IP_INPUT opt_netgraph.h
301 NETGRAPH7_IPFW opt_netgraph.h
302 NETGRAPH7_KSOCKET opt_netgraph.h
303 NETGRAPH7_L2TP opt_netgraph.h
304 NETGRAPH7_LMI opt_netgraph.h
305 # MPPC compression requires proprietary files (not included)
306 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h
307 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h
308 NETGRAPH7_NAT opt_netgraph.h
309 NETGRAPH7_NETFLOW opt_netgraph.h
310 NETGRAPH7_ONE2MANY opt_netgraph.h
311 NETGRAPH7_PPP opt_netgraph.h
312 NETGRAPH7_PPPOE opt_netgraph.h
313 NETGRAPH7_PPTPGRE opt_netgraph.h
314 NETGRAPH7_PRED1 opt_netgraph.h
315 NETGRAPH7_RFC1490 opt_netgraph.h
316 NETGRAPH7_SOCKET opt_netgraph.h
317 NETGRAPH7_SPLIT opt_netgraph.h
318 NETGRAPH7_SPPP opt_netgraph.h
319 NETGRAPH7_TAG opt_netgraph.h
320 NETGRAPH7_TCPMSS opt_netgraph.h
321 NETGRAPH7_TEE opt_netgraph.h
322 NETGRAPH7_TTY opt_netgraph.h
323 NETGRAPH7_UI opt_netgraph.h
324 NETGRAPH7_VJC opt_netgraph.h
327 NGATM7_ATM opt_netgraph.h
328 NGATM7_ATMBASE opt_netgraph.h
329 NGATM7_SSCOP opt_netgraph.h
330 NGATM7_SSCFU opt_netgraph.h
331 NGATM7_UNI opt_netgraph.h
332 NGATM7_CCATM opt_netgraph.h
334 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
335 # Each netgraph node type can be either be compiled into the kernel
336 # or loaded dynamically. To get the former, include the corresponding
337 # option below. Each type has its own man page, e.g. ng_async(8).
339 NETGRAPH_ASYNC opt_netgraph.h
340 NETGRAPH_BPF opt_netgraph.h
341 NETGRAPH_BRIDGE opt_netgraph.h
342 NETGRAPH_CISCO opt_netgraph.h
343 NETGRAPH_ECHO opt_netgraph.h
344 NETGRAPH_EIFACE opt_netgraph.h
345 NETGRAPH_ETHER opt_netgraph.h
346 NETGRAPH_FEC opt_netgraph.h
347 NETGRAPH_FRAME_RELAY opt_netgraph.h
348 NETGRAPH_HOLE opt_netgraph.h
349 NETGRAPH_IFACE opt_netgraph.h
350 NETGRAPH_KSOCKET opt_netgraph.h
351 NETGRAPH_LMI opt_netgraph.h
352 NETGRAPH_L2TP opt_netgraph.h
353 # MPPC compression requires proprietary files (not included)
354 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
355 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
356 NETGRAPH_ONE2MANY opt_netgraph.h
357 NETGRAPH_PPP opt_netgraph.h
358 NETGRAPH_PPPOE opt_netgraph.h
359 NETGRAPH_PPTPGRE opt_netgraph.h
360 NETGRAPH_RFC1490 opt_netgraph.h
361 NETGRAPH_SOCKET opt_netgraph.h
362 NETGRAPH_TEE opt_netgraph.h
363 NETGRAPH_TTY opt_netgraph.h
364 NETGRAPH_UI opt_netgraph.h
365 NETGRAPH_VJC opt_netgraph.h
373 # DPT driver debug flags
374 DPT_MEASURE_PERFORMANCE opt_dpt.h
375 DPT_HANDLE_TIMEOUTS opt_dpt.h
376 DPT_TIMEOUT_FACTOR opt_dpt.h
377 DPT_LOST_IRQ opt_dpt.h
378 DPT_RESET_HBA opt_dpt.h
380 # Misc debug flags. Most of these should probably be replaced with
381 # 'DEBUG', and then let people recompile just the interesting modules
382 # with 'make CC="cc -DDEBUG"'.
383 CLUSTERDEBUG opt_debug_cluster.h
384 DEBUG_1284 opt_ppb_1284.h
387 PLIP_DEBUG opt_plip.h
388 LOCKF_DEBUG opt_debug_lockf.h
389 SI_DEBUG opt_debug_si.h
393 FB_INSTALL_CDEV opt_fb.h
395 # ppbus related options
396 PERIPH_1284 opt_ppb_1284.h
397 DONTPROBE_1284 opt_ppb_1284.h
399 # smbus related options
400 ENABLE_ALART opt_intpm.h
402 # These cause changes all over the kernel
403 NO_LWKT_SPLIT_USERPRI opt_global.h
404 BLKDEV_IOSIZE opt_global.h
406 DEBUG_LOCKS opt_global.h
407 DEBUG_LOCKS_LATENCY opt_global.h
408 DEBUG_CRIT_SECTIONS opt_global.h
409 DIAGNOSTIC opt_global.h
410 INVARIANTS opt_global.h
411 VFS_BIO_DEBUG opt_global.h
412 SOCKBUF_DEBUG opt_global.h
413 PANIC_DEBUG opt_global.h
414 MBUF_DEBUG opt_global.h
415 PMAP_DEBUG opt_global.h
416 VM_PAGE_DEBUG opt_global.h
417 SLAB_DEBUG opt_global.h
419 # Sample system/interrupt PC
420 DEBUG_PCTRACK opt_pctrack.h
422 # These are VM related options
428 # Size of the kernel message buffer
429 MSGBUF_SIZE opt_msgbuf.h
432 NFS_MINATTRTIMO opt_nfs.h
433 NFS_MAXATTRTIMO opt_nfs.h
434 NFS_MINDIRATTRTIMO opt_nfs.h
435 NFS_MAXDIRATTRTIMO opt_nfs.h
436 NFS_GATHERDELAY opt_nfs.h
437 NFS_UIDHASHSIZ opt_nfs.h
438 NFS_WDELAYHASHSIZ opt_nfs.h
439 NFS_MUIDHASHSIZ opt_nfs.h
440 NFS_NOSERVER opt_nfs.h
444 MSDOSFS_DEBUG opt_msdosfs.h
446 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
447 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
448 BROOKTREE_ALLOC_PAGES opt_bktr.h
449 BKTR_OVERRIDE_CARD opt_bktr.h
450 BKTR_OVERRIDE_TUNER opt_bktr.h
451 BKTR_OVERRIDE_DBX opt_bktr.h
452 BKTR_OVERRIDE_MSP opt_bktr.h
453 BKTR_SYSTEM_DEFAULT opt_bktr.h
454 BKTR_ALLOC_PAGES opt_bktr.h
455 BKTR_USE_PLL opt_bktr.h
456 BKTR_GPIO_ACCESS opt_bktr.h
457 BKTR_NO_MSP_RESET opt_bktr.h
458 BKTR_430_FX_MODE opt_bktr.h
459 BKTR_SIS_VIA_MODE opt_bktr.h
460 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
462 # Various mi ISA bus flags
464 COM_MULTIPORT opt_sio.h
465 BREAK_TO_DEBUGGER opt_comconsole.h
466 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
468 # options for bus/device framework
471 # options for USB support
475 # options for the Realtek RTL8188*U/RTL8192CU driver (urtwn)
476 URTWN_WITHOUT_UCODE opt_urtwn.h
479 VINUMDEBUG opt_vinum.h
481 # Embedded system options
482 UKBD_DFLT_KEYMAP opt_ukbd.h
483 INIT_PATH opt_init_path.h
485 ROOTDEVNAME opt_rootdevname.h
488 PCFCLOCK_VERBOSE opt_pcfclock.h
489 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
491 # Network device queue based polling
492 IFPOLL_ENABLE opt_ifpoll.h
494 # options for ubsec driver
495 UBSEC_DEBUG opt_ubsec.h
496 UBSEC_RNDTEST opt_ubsec.h
497 UBSEC_NO_RNG opt_ubsec.h
499 # options for hifn driver
500 HIFN_DEBUG opt_hifn.h
501 HIFN_RNDTEST opt_hifn.h
502 HIFN_NO_RNG opt_hifn.h
504 # options for safenet driver
505 SAFE_DEBUG opt_safe.h
506 SAFE_NO_RNG opt_safe.h
507 SAFE_RNDTEST opt_safe.h
511 KTR_ENTRIES opt_global.h
513 KTR_ACPI_EC opt_ktr.h
515 KTR_DMCRYPT opt_ktr.h
516 KTR_ETHERNET opt_ktr.h
522 KTR_IF_START opt_ktr.h
524 KTR_KERNENTRY opt_ktr.h
526 KTR_SERIALIZER opt_ktr.h
527 KTR_SPIN_CONTENTION opt_ktr.h
528 KTR_TESTLOG opt_ktr.h
531 KTR_USCHED_BSD4 opt_ktr.h
532 KTR_USCHED_DFLY opt_ktr.h
533 KTR_VERBOSE opt_ktr.h
534 KTR_IF_POLL opt_ktr.h
536 KTR_SOWAKEUP opt_ktr.h
539 NTFS_DEBUG opt_ntfs.h
541 # options for the Atheros driver
543 #ATH_DEBUG_ALQ opt_ath.h
544 ATH_DIAGAPI opt_ath.h
545 #ATH_EEPROM_FIRMWARE opt_ath.h
546 #ATH_ENABLE_11N opt_ath.h
547 ATH_ENABLE_DFS opt_ath.h
548 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
549 ATH_KTR_INTR_DEBUG opt_ath.h
550 #ATH_TX99_DIAG opt_ath.h
553 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
556 #AH_DEBUG_ALQ opt_ah.h
557 #AH_DEBUG_COUNTRY opt_ah.h
558 AH_INTERRUPT_DEBUGGING opt_ah.h
560 AH_NEED_DESC_SWAP opt_ah.h
561 AH_PRIVATE_DIAG opt_ah.h
562 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
563 AH_SUPPORT_AR5416 opt_ah.h
564 AH_SUPPORT_AR9130 opt_ah.h
565 AH_SUPPORT_AR9330 opt_ah.h
566 AH_SUPPORT_AR9340 opt_ah.h
567 AH_USE_INIPDGAIN opt_ah.h
568 #AH_WRITE_EEPROM opt_ah.h
569 #AH_WRITE_REGDOMAIN opt_ah.h
572 BCE_RSS_DEBUG opt_bce.h
573 BCE_TSS_DEBUG opt_bce.h
576 BNX_RSS_DEBUG opt_bnx.h
577 BNX_TSO_DEBUG opt_bnx.h
578 BNX_TSS_DEBUG opt_bnx.h
582 BWN_RXRING_SLOTS opt_bwn.h
583 BWN_TXRING_SLOTS opt_bwn.h
586 SIBA_DEBUG opt_siba.h
589 EMX_RSS_DEBUG opt_emx.h
590 EMX_TSO_DEBUG opt_emx.h
591 EMX_TSS_DEBUG opt_emx.h
594 JME_RSS_DEBUG opt_jme.h
597 IGB_RSS_DEBUG opt_igb.h
598 IGB_TSS_DEBUG opt_igb.h
599 IGB_MSIX_DEBUG opt_igb.h
602 IX_RSS_DEBUG opt_ix.h
604 # Options for the Intel 802.11ac wireless driver
607 # Options for the Intel 802.11n wireless driver
610 # Options for the Intel 3945ABG wireless driver
614 DCONS_BUF_SIZE opt_dcons.h
615 DCONS_POLL_HZ opt_dcons.h
616 DCONS_FORCE_CONSOLE opt_dcons.h
617 DCONS_FORCE_GDB opt_dcons.h
619 # deprecated drivers and options
620 I_WANT_DEPRECATED_STUFF opt_deprecated.h
622 # Receive Side Scaling (now basecode)
626 WDOG_DISABLE_ON_PANIC opt_panic.h
627 ERROR_LED_ON_PANIC opt_panic.h
629 # 802.11 support layer
630 IEEE80211_DEBUG opt_wlan.h
631 IEEE80211_DEBUG_REFCNT opt_wlan.h
632 IEEE80211_SUPPORT_MESH opt_wlan.h
633 IEEE80211_SUPPORT_SUPERG opt_wlan.h
634 IEEE80211_SUPPORT_TDMA opt_wlan.h
636 # 802.11 TDMA support
637 TDMA_SLOTLEN_DEFAULT opt_tdma.h
638 TDMA_SLOTCNT_DEFAULT opt_tdma.h
639 TDMA_BINTVAL_DEFAULT opt_tdma.h
640 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
641 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
642 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
643 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
644 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
645 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
646 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
647 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
651 SND_DIAGNOSTIC opt_snd.h
652 SND_FEEDER_MULTIFORMAT opt_snd.h
653 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
654 SND_FEEDER_RATE_HP opt_snd.h
656 SND_OLDSTEREO opt_snd.h
658 PANIC_REBOOT_WAIT_TIME opt_panic.h
660 # Obsolete options (will be removed in the future)
662 SYSVMSG opt_dontuse.h
663 SYSVSEM opt_dontuse.h
664 SYSVSHM opt_dontuse.h
665 P1003_1B opt_dontuse.h
666 _KPOSIX_VERSION opt_dontuse.h
667 DSCHED_FQ opt_dontuse.h