- Gigabyte G33-S2H fixup, due to the present of multiple competing
[dragonfly.git] / sys / kern / vfs_mount.c
blobf1423ce5cd4c9a46cb8711841dd32b71a8f56f7d
1 /*
2 * Copyright (c) 2004 The DragonFly Project. All rights reserved.
3 *
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
16 * distribution.
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 * SUCH DAMAGE.
34 * Copyright (c) 1989, 1993
35 * The Regents of the University of California. All rights reserved.
36 * (c) UNIX System Laboratories, Inc.
37 * All or some portions of this file are derived from material licensed
38 * to the University of California by American Telephone and Telegraph
39 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
40 * the permission of UNIX System Laboratories, Inc.
42 * Redistribution and use in source and binary forms, with or without
43 * modification, are permitted provided that the following conditions
44 * are met:
45 * 1. Redistributions of source code must retain the above copyright
46 * notice, this list of conditions and the following disclaimer.
47 * 2. Redistributions in binary form must reproduce the above copyright
48 * notice, this list of conditions and the following disclaimer in the
49 * documentation and/or other materials provided with the distribution.
50 * 3. All advertising materials mentioning features or use of this software
51 * must display the following acknowledgement:
52 * This product includes software developed by the University of
53 * California, Berkeley and its contributors.
54 * 4. Neither the name of the University nor the names of its contributors
55 * may be used to endorse or promote products derived from this software
56 * without specific prior written permission.
58 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68 * SUCH DAMAGE.
70 * $DragonFly: src/sys/kern/vfs_mount.c,v 1.29 2007/11/06 03:49:58 dillon Exp $
74 * External virtual filesystem routines
76 #include "opt_ddb.h"
78 #include <sys/param.h>
79 #include <sys/systm.h>
80 #include <sys/kernel.h>
81 #include <sys/malloc.h>
82 #include <sys/mount.h>
83 #include <sys/proc.h>
84 #include <sys/vnode.h>
85 #include <sys/buf.h>
86 #include <sys/eventhandler.h>
87 #include <sys/kthread.h>
88 #include <sys/sysctl.h>
90 #include <machine/limits.h>
92 #include <sys/buf2.h>
93 #include <sys/thread2.h>
94 #include <sys/sysref2.h>
96 #include <vm/vm.h>
97 #include <vm/vm_object.h>
99 struct mountscan_info {
100 TAILQ_ENTRY(mountscan_info) msi_entry;
101 int msi_how;
102 struct mount *msi_node;
105 struct vmntvnodescan_info {
106 TAILQ_ENTRY(vmntvnodescan_info) entry;
107 struct vnode *vp;
110 static int vnlru_nowhere = 0;
111 SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RD,
112 &vnlru_nowhere, 0,
113 "Number of times the vnlru process ran without success");
116 static struct lwkt_token mntid_token;
118 /* note: mountlist exported to pstat */
119 struct mntlist mountlist = TAILQ_HEAD_INITIALIZER(mountlist);
120 static TAILQ_HEAD(,mountscan_info) mountscan_list;
121 static struct lwkt_token mountlist_token;
122 static TAILQ_HEAD(,vmntvnodescan_info) mntvnodescan_list;
123 struct lwkt_token mntvnode_token;
125 static TAILQ_HEAD(,bio_ops) bio_ops_list = TAILQ_HEAD_INITIALIZER(bio_ops_list);
128 * Called from vfsinit()
130 void
131 vfs_mount_init(void)
133 lwkt_token_init(&mountlist_token);
134 lwkt_token_init(&mntvnode_token);
135 lwkt_token_init(&mntid_token);
136 TAILQ_INIT(&mountscan_list);
137 TAILQ_INIT(&mntvnodescan_list);
141 * Support function called with mntvnode_token held to remove a vnode
142 * from the mountlist. We must update any list scans which are in progress.
144 static void
145 vremovevnodemnt(struct vnode *vp)
147 struct vmntvnodescan_info *info;
149 TAILQ_FOREACH(info, &mntvnodescan_list, entry) {
150 if (info->vp == vp)
151 info->vp = TAILQ_NEXT(vp, v_nmntvnodes);
153 TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
157 * Support function called with mntvnode_token held to move a vnode to
158 * the end of the list.
160 static void
161 vmovevnodetoend(struct mount *mp, struct vnode *vp)
163 vremovevnodemnt(vp);
164 TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
169 * Allocate a new vnode and associate it with a tag, mount point, and
170 * operations vector.
172 * A VX locked and refd vnode is returned. The caller should setup the
173 * remaining fields and vx_put() or, if he wishes to leave a vref,
174 * vx_unlock() the vnode.
177 getnewvnode(enum vtagtype tag, struct mount *mp,
178 struct vnode **vpp, int lktimeout, int lkflags)
180 struct vnode *vp;
182 KKASSERT(mp != NULL);
184 vp = allocvnode(lktimeout, lkflags);
185 vp->v_tag = tag;
186 vp->v_data = NULL;
189 * By default the vnode is assigned the mount point's normal
190 * operations vector.
192 vp->v_ops = &mp->mnt_vn_use_ops;
195 * Placing the vnode on the mount point's queue makes it visible.
196 * VNON prevents it from being messed with, however.
198 insmntque(vp, mp);
201 * A VX locked & refd vnode is returned.
203 *vpp = vp;
204 return (0);
208 * This function creates vnodes with special operations vectors. The
209 * mount point is optional.
211 * This routine is being phased out.
214 getspecialvnode(enum vtagtype tag, struct mount *mp,
215 struct vop_ops **ops,
216 struct vnode **vpp, int lktimeout, int lkflags)
218 struct vnode *vp;
220 vp = allocvnode(lktimeout, lkflags);
221 vp->v_tag = tag;
222 vp->v_data = NULL;
223 vp->v_ops = ops;
226 * Placing the vnode on the mount point's queue makes it visible.
227 * VNON prevents it from being messed with, however.
229 insmntque(vp, mp);
232 * A VX locked & refd vnode is returned.
234 *vpp = vp;
235 return (0);
239 * Interlock against an unmount, return 0 on success, non-zero on failure.
241 * The passed flag may be 0 or LK_NOWAIT and is only used if an unmount
242 * is in-progress.
244 * If no unmount is in-progress LK_NOWAIT is ignored. No other flag bits
245 * are used. A shared locked will be obtained and the filesystem will not
246 * be unmountable until the lock is released.
249 vfs_busy(struct mount *mp, int flags)
251 int lkflags;
253 if (mp->mnt_kern_flag & MNTK_UNMOUNT) {
254 if (flags & LK_NOWAIT)
255 return (ENOENT);
256 /* XXX not MP safe */
257 mp->mnt_kern_flag |= MNTK_MWAIT;
259 * Since all busy locks are shared except the exclusive
260 * lock granted when unmounting, the only place that a
261 * wakeup needs to be done is at the release of the
262 * exclusive lock at the end of dounmount.
264 tsleep((caddr_t)mp, 0, "vfs_busy", 0);
265 return (ENOENT);
267 lkflags = LK_SHARED;
268 if (lockmgr(&mp->mnt_lock, lkflags))
269 panic("vfs_busy: unexpected lock failure");
270 return (0);
274 * Free a busy filesystem.
276 void
277 vfs_unbusy(struct mount *mp)
279 lockmgr(&mp->mnt_lock, LK_RELEASE);
283 * Lookup a filesystem type, and if found allocate and initialize
284 * a mount structure for it.
286 * Devname is usually updated by mount(8) after booting.
289 vfs_rootmountalloc(char *fstypename, char *devname, struct mount **mpp)
291 struct vfsconf *vfsp;
292 struct mount *mp;
294 if (fstypename == NULL)
295 return (ENODEV);
296 for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next) {
297 if (!strcmp(vfsp->vfc_name, fstypename))
298 break;
300 if (vfsp == NULL)
301 return (ENODEV);
302 mp = kmalloc(sizeof(struct mount), M_MOUNT, M_WAITOK);
303 bzero((char *)mp, (u_long)sizeof(struct mount));
304 lockinit(&mp->mnt_lock, "vfslock", VLKTIMEOUT, 0);
305 vfs_busy(mp, LK_NOWAIT);
306 TAILQ_INIT(&mp->mnt_nvnodelist);
307 TAILQ_INIT(&mp->mnt_reservedvnlist);
308 TAILQ_INIT(&mp->mnt_jlist);
309 mp->mnt_nvnodelistsize = 0;
310 mp->mnt_vfc = vfsp;
311 mp->mnt_op = vfsp->vfc_vfsops;
312 mp->mnt_flag = MNT_RDONLY;
313 vfsp->vfc_refcount++;
314 mp->mnt_iosize_max = DFLTPHYS;
315 mp->mnt_stat.f_type = vfsp->vfc_typenum;
316 mp->mnt_flag |= vfsp->vfc_flags & MNT_VISFLAGMASK;
317 strncpy(mp->mnt_stat.f_fstypename, vfsp->vfc_name, MFSNAMELEN);
318 copystr(devname, mp->mnt_stat.f_mntfromname, MNAMELEN - 1, 0);
319 *mpp = mp;
320 return (0);
324 * Lookup a mount point by filesystem identifier.
326 struct mount *
327 vfs_getvfs(fsid_t *fsid)
329 struct mount *mp;
330 lwkt_tokref ilock;
332 lwkt_gettoken(&ilock, &mountlist_token);
333 TAILQ_FOREACH(mp, &mountlist, mnt_list) {
334 if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
335 mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) {
336 break;
339 lwkt_reltoken(&ilock);
340 return (mp);
344 * Get a new unique fsid. Try to make its val[0] unique, since this value
345 * will be used to create fake device numbers for stat(). Also try (but
346 * not so hard) make its val[0] unique mod 2^16, since some emulators only
347 * support 16-bit device numbers. We end up with unique val[0]'s for the
348 * first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
350 * Keep in mind that several mounts may be running in parallel. Starting
351 * the search one past where the previous search terminated is both a
352 * micro-optimization and a defense against returning the same fsid to
353 * different mounts.
355 void
356 vfs_getnewfsid(struct mount *mp)
358 static u_int16_t mntid_base;
359 lwkt_tokref ilock;
360 fsid_t tfsid;
361 int mtype;
363 lwkt_gettoken(&ilock, &mntid_token);
364 mtype = mp->mnt_vfc->vfc_typenum;
365 tfsid.val[1] = mtype;
366 mtype = (mtype & 0xFF) << 24;
367 for (;;) {
368 tfsid.val[0] = makeudev(255,
369 mtype | ((mntid_base & 0xFF00) << 8) | (mntid_base & 0xFF));
370 mntid_base++;
371 if (vfs_getvfs(&tfsid) == NULL)
372 break;
374 mp->mnt_stat.f_fsid.val[0] = tfsid.val[0];
375 mp->mnt_stat.f_fsid.val[1] = tfsid.val[1];
376 lwkt_reltoken(&ilock);
380 * This routine is called when we have too many vnodes. It attempts
381 * to free <count> vnodes and will potentially free vnodes that still
382 * have VM backing store (VM backing store is typically the cause
383 * of a vnode blowout so we want to do this). Therefore, this operation
384 * is not considered cheap.
386 * A number of conditions may prevent a vnode from being reclaimed.
387 * the buffer cache may have references on the vnode, a directory
388 * vnode may still have references due to the namei cache representing
389 * underlying files, or the vnode may be in active use. It is not
390 * desireable to reuse such vnodes. These conditions may cause the
391 * number of vnodes to reach some minimum value regardless of what
392 * you set kern.maxvnodes to. Do not set kern.maxvnodes too low.
396 * This is a quick non-blocking check to determine if the vnode is a good
397 * candidate for being (eventually) vgone()'d. Returns 0 if the vnode is
398 * not a good candidate, 1 if it is.
400 static __inline int
401 vmightfree(struct vnode *vp, int page_count)
403 if (vp->v_flag & VRECLAIMED)
404 return (0);
405 #if 0
406 if ((vp->v_flag & VFREE) && TAILQ_EMPTY(&vp->v_namecache))
407 return (0);
408 #endif
409 if (sysref_isactive(&vp->v_sysref))
410 return (0);
411 if (vp->v_object && vp->v_object->resident_page_count >= page_count)
412 return (0);
413 return (1);
417 * The vnode was found to be possibly vgone()able and the caller has locked it
418 * (thus the usecount should be 1 now). Determine if the vnode is actually
419 * vgone()able, doing some cleanups in the process. Returns 1 if the vnode
420 * can be vgone()'d, 0 otherwise.
422 * Note that v_auxrefs may be non-zero because (A) this vnode is not a leaf
423 * in the namecache topology and (B) this vnode has buffer cache bufs.
424 * We cannot remove vnodes with non-leaf namecache associations. We do a
425 * tentitive leaf check prior to attempting to flush out any buffers but the
426 * 'real' test when all is said in done is that v_auxrefs must become 0 for
427 * the vnode to be freeable.
429 * We could theoretically just unconditionally flush when v_auxrefs != 0,
430 * but flushing data associated with non-leaf nodes (which are always
431 * directories), just throws it away for no benefit. It is the buffer
432 * cache's responsibility to choose buffers to recycle from the cached
433 * data point of view.
435 static int
436 visleaf(struct vnode *vp)
438 struct namecache *ncp;
440 TAILQ_FOREACH(ncp, &vp->v_namecache, nc_vnode) {
441 if (!TAILQ_EMPTY(&ncp->nc_list))
442 return(0);
444 return(1);
448 * Try to clean up the vnode to the point where it can be vgone()'d, returning
449 * 0 if it cannot be vgone()'d (or already has been), 1 if it can. Unlike
450 * vmightfree() this routine may flush the vnode and block. Vnodes marked
451 * VFREE are still candidates for vgone()ing because they may hold namecache
452 * resources and could be blocking the namecache directory hierarchy (and
453 * related vnodes) from being freed.
455 static int
456 vtrytomakegoneable(struct vnode *vp, int page_count)
458 if (vp->v_flag & VRECLAIMED)
459 return (0);
460 if (vp->v_sysref.refcnt > 1)
461 return (0);
462 if (vp->v_object && vp->v_object->resident_page_count >= page_count)
463 return (0);
464 if (vp->v_auxrefs && visleaf(vp)) {
465 vinvalbuf(vp, V_SAVE, 0, 0);
466 #if 0 /* DEBUG */
467 kprintf((vp->v_auxrefs ? "vrecycle: vp %p failed: %s\n" :
468 "vrecycle: vp %p succeeded: %s\n"), vp,
469 (TAILQ_FIRST(&vp->v_namecache) ?
470 TAILQ_FIRST(&vp->v_namecache)->nc_name : "?"));
471 #endif
475 * This sequence may seem a little strange, but we need to optimize
476 * the critical path a bit. We can't recycle vnodes with other
477 * references and because we are trying to recycle an otherwise
478 * perfectly fine vnode we have to invalidate the namecache in a
479 * way that avoids possible deadlocks (since the vnode lock is being
480 * held here). Finally, we have to check for other references one
481 * last time in case something snuck in during the inval.
483 if (vp->v_sysref.refcnt > 1 || vp->v_auxrefs != 0)
484 return (0);
485 if (cache_inval_vp_nonblock(vp))
486 return (0);
487 return (vp->v_sysref.refcnt <= 1 && vp->v_auxrefs == 0);
491 * Reclaim up to 1/10 of the vnodes associated with a mount point. Try
492 * to avoid vnodes which have lots of resident pages (we are trying to free
493 * vnodes, not memory).
495 * This routine is a callback from the mountlist scan. The mount point
496 * in question will be busied.
498 static int
499 vlrureclaim(struct mount *mp, void *data)
501 struct vnode *vp;
502 lwkt_tokref ilock;
503 int done;
504 int trigger;
505 int usevnodes;
506 int count;
507 int trigger_mult = vnlru_nowhere;
510 * Calculate the trigger point for the resident pages check. The
511 * minimum trigger value is approximately the number of pages in
512 * the system divded by the number of vnodes. However, due to
513 * various other system memory overheads unrelated to data caching
514 * it is a good idea to double the trigger (at least).
516 * trigger_mult starts at 0. If the recycler is having problems
517 * finding enough freeable vnodes it will increase trigger_mult.
518 * This should not happen in normal operation, even on machines with
519 * low amounts of memory, but extraordinary memory use by the system
520 * verses the amount of cached data can trigger it.
522 usevnodes = desiredvnodes;
523 if (usevnodes <= 0)
524 usevnodes = 1;
525 trigger = vmstats.v_page_count * (trigger_mult + 2) / usevnodes;
527 done = 0;
528 lwkt_gettoken(&ilock, &mntvnode_token);
529 count = mp->mnt_nvnodelistsize / 10 + 1;
530 while (count && (vp = TAILQ_FIRST(&mp->mnt_nvnodelist)) != NULL) {
532 * __VNODESCAN__
534 * The VP will stick around while we hold mntvnode_token,
535 * at least until we block, so we can safely do an initial
536 * check, and then must check again after we lock the vnode.
538 if (vp->v_type == VNON || /* syncer or indeterminant */
539 !vmightfree(vp, trigger) /* critical path opt */
541 vmovevnodetoend(mp, vp);
542 --count;
543 continue;
547 * VX get the candidate vnode. If the VX get fails the
548 * vnode might still be on the mountlist. Our loop depends
549 * on us at least cycling the vnode to the end of the
550 * mountlist.
552 if (vx_get_nonblock(vp) != 0) {
553 if (vp->v_mount == mp)
554 vmovevnodetoend(mp, vp);
555 --count;
556 continue;
560 * Since we blocked locking the vp, make sure it is still
561 * a candidate for reclamation. That is, it has not already
562 * been reclaimed and only has our VX reference associated
563 * with it.
565 if (vp->v_type == VNON || /* syncer or indeterminant */
566 (vp->v_flag & VRECLAIMED) ||
567 vp->v_mount != mp ||
568 !vtrytomakegoneable(vp, trigger) /* critical path opt */
570 if (vp->v_mount == mp)
571 vmovevnodetoend(mp, vp);
572 --count;
573 vx_put(vp);
574 continue;
578 * All right, we are good, move the vp to the end of the
579 * mountlist and clean it out. The vget will have returned
580 * an error if the vnode was destroyed (VRECLAIMED set), so we
581 * do not have to check again. The vput() will move the
582 * vnode to the free list if the vgone() was successful.
584 KKASSERT(vp->v_mount == mp);
585 vmovevnodetoend(mp, vp);
586 vgone_vxlocked(vp);
587 vx_put(vp);
588 ++done;
589 --count;
591 lwkt_reltoken(&ilock);
592 return (done);
596 * Attempt to recycle vnodes in a context that is always safe to block.
597 * Calling vlrurecycle() from the bowels of file system code has some
598 * interesting deadlock problems.
600 static struct thread *vnlruthread;
601 static int vnlruproc_sig;
603 void
604 vnlru_proc_wait(void)
606 if (vnlruproc_sig == 0) {
607 vnlruproc_sig = 1; /* avoid unnecessary wakeups */
608 wakeup(vnlruthread);
610 tsleep(&vnlruproc_sig, 0, "vlruwk", hz);
613 static void
614 vnlru_proc(void)
616 struct thread *td = curthread;
617 int done;
619 EVENTHANDLER_REGISTER(shutdown_pre_sync, shutdown_kproc, td,
620 SHUTDOWN_PRI_FIRST);
622 crit_enter();
623 for (;;) {
624 kproc_suspend_loop();
627 * Try to free some vnodes if we have too many
629 if (numvnodes > desiredvnodes &&
630 freevnodes > desiredvnodes * 2 / 10) {
631 int count = numvnodes - desiredvnodes;
633 if (count > freevnodes / 100)
634 count = freevnodes / 100;
635 if (count < 5)
636 count = 5;
637 freesomevnodes(count);
641 * Nothing to do if most of our vnodes are already on
642 * the free list.
644 if (numvnodes - freevnodes <= desiredvnodes * 9 / 10) {
645 vnlruproc_sig = 0;
646 wakeup(&vnlruproc_sig);
647 tsleep(td, 0, "vlruwt", hz);
648 continue;
650 cache_cleanneg(0);
651 done = mountlist_scan(vlrureclaim, NULL, MNTSCAN_FORWARD);
654 * The vlrureclaim() call only processes 1/10 of the vnodes
655 * on each mount. If we couldn't find any repeat the loop
656 * at least enough times to cover all available vnodes before
657 * we start sleeping. Complain if the failure extends past
658 * 30 second, every 30 seconds.
660 if (done == 0) {
661 ++vnlru_nowhere;
662 if (vnlru_nowhere % 10 == 0)
663 tsleep(td, 0, "vlrup", hz * 3);
664 if (vnlru_nowhere % 100 == 0)
665 kprintf("vnlru_proc: vnode recycler stopped working!\n");
666 if (vnlru_nowhere == 1000)
667 vnlru_nowhere = 900;
668 } else {
669 vnlru_nowhere = 0;
672 crit_exit();
676 * MOUNTLIST FUNCTIONS
680 * mountlist_insert (MP SAFE)
682 * Add a new mount point to the mount list.
684 void
685 mountlist_insert(struct mount *mp, int how)
687 lwkt_tokref ilock;
689 lwkt_gettoken(&ilock, &mountlist_token);
690 if (how == MNTINS_FIRST)
691 TAILQ_INSERT_HEAD(&mountlist, mp, mnt_list);
692 else
693 TAILQ_INSERT_TAIL(&mountlist, mp, mnt_list);
694 lwkt_reltoken(&ilock);
698 * mountlist_interlock (MP SAFE)
700 * Execute the specified interlock function with the mountlist token
701 * held. The function will be called in a serialized fashion verses
702 * other functions called through this mechanism.
705 mountlist_interlock(int (*callback)(struct mount *), struct mount *mp)
707 lwkt_tokref ilock;
708 int error;
710 lwkt_gettoken(&ilock, &mountlist_token);
711 error = callback(mp);
712 lwkt_reltoken(&ilock);
713 return (error);
717 * mountlist_boot_getfirst (DURING BOOT ONLY)
719 * This function returns the first mount on the mountlist, which is
720 * expected to be the root mount. Since no interlocks are obtained
721 * this function is only safe to use during booting.
724 struct mount *
725 mountlist_boot_getfirst(void)
727 return(TAILQ_FIRST(&mountlist));
731 * mountlist_remove (MP SAFE)
733 * Remove a node from the mountlist. If this node is the next scan node
734 * for any active mountlist scans, the active mountlist scan will be
735 * adjusted to skip the node, thus allowing removals during mountlist
736 * scans.
738 void
739 mountlist_remove(struct mount *mp)
741 struct mountscan_info *msi;
742 lwkt_tokref ilock;
744 lwkt_gettoken(&ilock, &mountlist_token);
745 TAILQ_FOREACH(msi, &mountscan_list, msi_entry) {
746 if (msi->msi_node == mp) {
747 if (msi->msi_how & MNTSCAN_FORWARD)
748 msi->msi_node = TAILQ_NEXT(mp, mnt_list);
749 else
750 msi->msi_node = TAILQ_PREV(mp, mntlist, mnt_list);
753 TAILQ_REMOVE(&mountlist, mp, mnt_list);
754 lwkt_reltoken(&ilock);
758 * mountlist_scan (MP SAFE)
760 * Safely scan the mount points on the mount list. Unless otherwise
761 * specified each mount point will be busied prior to the callback and
762 * unbusied afterwords. The callback may safely remove any mount point
763 * without interfering with the scan. If the current callback
764 * mount is removed the scanner will not attempt to unbusy it.
766 * If a mount node cannot be busied it is silently skipped.
768 * The callback return value is aggregated and a total is returned. A return
769 * value of < 0 is not aggregated and will terminate the scan.
771 * MNTSCAN_FORWARD - the mountlist is scanned in the forward direction
772 * MNTSCAN_REVERSE - the mountlist is scanned in reverse
773 * MNTSCAN_NOBUSY - the scanner will make the callback without busying
774 * the mount node.
777 mountlist_scan(int (*callback)(struct mount *, void *), void *data, int how)
779 struct mountscan_info info;
780 lwkt_tokref ilock;
781 struct mount *mp;
782 thread_t td;
783 int count;
784 int res;
786 lwkt_gettoken(&ilock, &mountlist_token);
788 info.msi_how = how;
789 info.msi_node = NULL; /* paranoia */
790 TAILQ_INSERT_TAIL(&mountscan_list, &info, msi_entry);
792 res = 0;
793 td = curthread;
795 if (how & MNTSCAN_FORWARD) {
796 info.msi_node = TAILQ_FIRST(&mountlist);
797 while ((mp = info.msi_node) != NULL) {
798 if (how & MNTSCAN_NOBUSY) {
799 count = callback(mp, data);
800 } else if (vfs_busy(mp, LK_NOWAIT) == 0) {
801 count = callback(mp, data);
802 if (mp == info.msi_node)
803 vfs_unbusy(mp);
804 } else {
805 count = 0;
807 if (count < 0)
808 break;
809 res += count;
810 if (mp == info.msi_node)
811 info.msi_node = TAILQ_NEXT(mp, mnt_list);
813 } else if (how & MNTSCAN_REVERSE) {
814 info.msi_node = TAILQ_LAST(&mountlist, mntlist);
815 while ((mp = info.msi_node) != NULL) {
816 if (how & MNTSCAN_NOBUSY) {
817 count = callback(mp, data);
818 } else if (vfs_busy(mp, LK_NOWAIT) == 0) {
819 count = callback(mp, data);
820 if (mp == info.msi_node)
821 vfs_unbusy(mp);
822 } else {
823 count = 0;
825 if (count < 0)
826 break;
827 res += count;
828 if (mp == info.msi_node)
829 info.msi_node = TAILQ_PREV(mp, mntlist, mnt_list);
832 TAILQ_REMOVE(&mountscan_list, &info, msi_entry);
833 lwkt_reltoken(&ilock);
834 return(res);
838 * MOUNT RELATED VNODE FUNCTIONS
841 static struct kproc_desc vnlru_kp = {
842 "vnlru",
843 vnlru_proc,
844 &vnlruthread
846 SYSINIT(vnlru, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &vnlru_kp)
849 * Move a vnode from one mount queue to another.
851 void
852 insmntque(struct vnode *vp, struct mount *mp)
854 lwkt_tokref ilock;
856 lwkt_gettoken(&ilock, &mntvnode_token);
858 * Delete from old mount point vnode list, if on one.
860 if (vp->v_mount != NULL) {
861 KASSERT(vp->v_mount->mnt_nvnodelistsize > 0,
862 ("bad mount point vnode list size"));
863 vremovevnodemnt(vp);
864 vp->v_mount->mnt_nvnodelistsize--;
867 * Insert into list of vnodes for the new mount point, if available.
869 if ((vp->v_mount = mp) == NULL) {
870 lwkt_reltoken(&ilock);
871 return;
873 TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
874 mp->mnt_nvnodelistsize++;
875 lwkt_reltoken(&ilock);
880 * Scan the vnodes under a mount point and issue appropriate callbacks.
882 * The fastfunc() callback is called with just the mountlist token held
883 * (no vnode lock). It may not block and the vnode may be undergoing
884 * modifications while the caller is processing it. The vnode will
885 * not be entirely destroyed, however, due to the fact that the mountlist
886 * token is held. A return value < 0 skips to the next vnode without calling
887 * the slowfunc(), a return value > 0 terminates the loop.
889 * The slowfunc() callback is called after the vnode has been successfully
890 * locked based on passed flags. The vnode is skipped if it gets rearranged
891 * or destroyed while blocking on the lock. A non-zero return value from
892 * the slow function terminates the loop. The slow function is allowed to
893 * arbitrarily block. The scanning code guarentees consistency of operation
894 * even if the slow function deletes or moves the node, or blocks and some
895 * other thread deletes or moves the node.
898 vmntvnodescan(
899 struct mount *mp,
900 int flags,
901 int (*fastfunc)(struct mount *mp, struct vnode *vp, void *data),
902 int (*slowfunc)(struct mount *mp, struct vnode *vp, void *data),
903 void *data
905 struct vmntvnodescan_info info;
906 lwkt_tokref ilock;
907 struct vnode *vp;
908 int r = 0;
909 int maxcount = 1000000;
911 lwkt_gettoken(&ilock, &mntvnode_token);
913 info.vp = TAILQ_FIRST(&mp->mnt_nvnodelist);
914 TAILQ_INSERT_TAIL(&mntvnodescan_list, &info, entry);
915 while ((vp = info.vp) != NULL) {
916 if (--maxcount == 0)
917 panic("maxcount reached during vmntvnodescan");
919 if (vp->v_type == VNON) /* visible but not ready */
920 goto next;
921 KKASSERT(vp->v_mount == mp);
924 * Quick test. A negative return continues the loop without
925 * calling the slow test. 0 continues onto the slow test.
926 * A positive number aborts the loop.
928 if (fastfunc) {
929 if ((r = fastfunc(mp, vp, data)) < 0)
930 goto next;
931 if (r)
932 break;
936 * Get a vxlock on the vnode, retry if it has moved or isn't
937 * in the mountlist where we expect it.
939 if (slowfunc) {
940 int error;
942 switch(flags) {
943 case VMSC_GETVP:
944 error = vget(vp, LK_EXCLUSIVE);
945 break;
946 case VMSC_GETVP|VMSC_NOWAIT:
947 error = vget(vp, LK_EXCLUSIVE|LK_NOWAIT);
948 break;
949 case VMSC_GETVX:
950 vx_get(vp);
951 error = 0;
952 break;
953 default:
954 error = 0;
955 break;
957 if (error)
958 goto next;
960 * Do not call the slow function if the vnode is
961 * invalid or if it was ripped out from under us
962 * while we (potentially) blocked.
964 if (info.vp == vp && vp->v_type != VNON)
965 r = slowfunc(mp, vp, data);
968 * Cleanup
970 switch(flags) {
971 case VMSC_GETVP:
972 case VMSC_GETVP|VMSC_NOWAIT:
973 vput(vp);
974 break;
975 case VMSC_GETVX:
976 vx_put(vp);
977 break;
978 default:
979 break;
981 if (r != 0)
982 break;
986 * Iterate. If the vnode was ripped out from under us
987 * info.vp will already point to the next vnode, otherwise
988 * we have to obtain the next valid vnode ourselves.
990 next:
991 if (info.vp == vp)
992 info.vp = TAILQ_NEXT(vp, v_nmntvnodes);
994 TAILQ_REMOVE(&mntvnodescan_list, &info, entry);
995 lwkt_reltoken(&ilock);
996 return(r);
1000 * Remove any vnodes in the vnode table belonging to mount point mp.
1002 * If FORCECLOSE is not specified, there should not be any active ones,
1003 * return error if any are found (nb: this is a user error, not a
1004 * system error). If FORCECLOSE is specified, detach any active vnodes
1005 * that are found.
1007 * If WRITECLOSE is set, only flush out regular file vnodes open for
1008 * writing.
1010 * SKIPSYSTEM causes any vnodes marked VSYSTEM to be skipped.
1012 * `rootrefs' specifies the base reference count for the root vnode
1013 * of this filesystem. The root vnode is considered busy if its
1014 * v_sysref.refcnt exceeds this value. On a successful return, vflush()
1015 * will call vrele() on the root vnode exactly rootrefs times.
1016 * If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
1017 * be zero.
1019 #ifdef DIAGNOSTIC
1020 static int busyprt = 0; /* print out busy vnodes */
1021 SYSCTL_INT(_debug, OID_AUTO, busyprt, CTLFLAG_RW, &busyprt, 0, "");
1022 #endif
1024 static int vflush_scan(struct mount *mp, struct vnode *vp, void *data);
1026 struct vflush_info {
1027 int flags;
1028 int busy;
1029 thread_t td;
1033 vflush(struct mount *mp, int rootrefs, int flags)
1035 struct thread *td = curthread; /* XXX */
1036 struct vnode *rootvp = NULL;
1037 int error;
1038 struct vflush_info vflush_info;
1040 if (rootrefs > 0) {
1041 KASSERT((flags & (SKIPSYSTEM | WRITECLOSE)) == 0,
1042 ("vflush: bad args"));
1044 * Get the filesystem root vnode. We can vput() it
1045 * immediately, since with rootrefs > 0, it won't go away.
1047 if ((error = VFS_ROOT(mp, &rootvp)) != 0)
1048 return (error);
1049 vput(rootvp);
1052 vflush_info.busy = 0;
1053 vflush_info.flags = flags;
1054 vflush_info.td = td;
1055 vmntvnodescan(mp, VMSC_GETVX, NULL, vflush_scan, &vflush_info);
1057 if (rootrefs > 0 && (flags & FORCECLOSE) == 0) {
1059 * If just the root vnode is busy, and if its refcount
1060 * is equal to `rootrefs', then go ahead and kill it.
1062 KASSERT(vflush_info.busy > 0, ("vflush: not busy"));
1063 KASSERT(rootvp->v_sysref.refcnt >= rootrefs, ("vflush: rootrefs"));
1064 if (vflush_info.busy == 1 && rootvp->v_sysref.refcnt == rootrefs) {
1065 vx_lock(rootvp);
1066 vgone_vxlocked(rootvp);
1067 vx_unlock(rootvp);
1068 vflush_info.busy = 0;
1071 if (vflush_info.busy)
1072 return (EBUSY);
1073 for (; rootrefs > 0; rootrefs--)
1074 vrele(rootvp);
1075 return (0);
1079 * The scan callback is made with an VX locked vnode.
1081 static int
1082 vflush_scan(struct mount *mp, struct vnode *vp, void *data)
1084 struct vflush_info *info = data;
1085 struct vattr vattr;
1088 * Skip over a vnodes marked VSYSTEM.
1090 if ((info->flags & SKIPSYSTEM) && (vp->v_flag & VSYSTEM)) {
1091 return(0);
1095 * If WRITECLOSE is set, flush out unlinked but still open
1096 * files (even if open only for reading) and regular file
1097 * vnodes open for writing.
1099 if ((info->flags & WRITECLOSE) &&
1100 (vp->v_type == VNON ||
1101 (VOP_GETATTR(vp, &vattr) == 0 &&
1102 vattr.va_nlink > 0)) &&
1103 (vp->v_writecount == 0 || vp->v_type != VREG)) {
1104 return(0);
1108 * If we are the only holder (refcnt of 1) or the vnode is in
1109 * termination (refcnt < 0), we can vgone the vnode.
1111 if (vp->v_sysref.refcnt <= 1) {
1112 vgone_vxlocked(vp);
1113 return(0);
1117 * If FORCECLOSE is set, forcibly close the vnode. For block
1118 * or character devices, revert to an anonymous device. For
1119 * all other files, just kill them.
1121 if (info->flags & FORCECLOSE) {
1122 if (vp->v_type != VBLK && vp->v_type != VCHR) {
1123 vgone_vxlocked(vp);
1124 } else {
1125 vclean_vxlocked(vp, 0);
1126 vp->v_ops = &spec_vnode_vops_p;
1127 insmntque(vp, NULL);
1129 return(0);
1131 #ifdef DIAGNOSTIC
1132 if (busyprt)
1133 vprint("vflush: busy vnode", vp);
1134 #endif
1135 ++info->busy;
1136 return(0);
1139 void
1140 add_bio_ops(struct bio_ops *ops)
1142 TAILQ_INSERT_TAIL(&bio_ops_list, ops, entry);
1145 void
1146 rem_bio_ops(struct bio_ops *ops)
1148 TAILQ_REMOVE(&bio_ops_list, ops, entry);
1152 * This calls the bio_ops io_sync function either for a mount point
1153 * or generally.
1155 * WARNING: softdeps is weirdly coded and just isn't happy unless
1156 * io_sync is called with a NULL mount from the general syncing code.
1158 void
1159 bio_ops_sync(struct mount *mp)
1161 struct bio_ops *ops;
1163 if (mp) {
1164 if ((ops = mp->mnt_bioops) != NULL)
1165 ops->io_sync(mp);
1166 } else {
1167 TAILQ_FOREACH(ops, &bio_ops_list, entry) {
1168 ops->io_sync(NULL);