etc/network.subr

   1 #
   2 # Copyright (c) 2003 The FreeBSD Project. All rights reserved.
   3 #
   4 # Redistribution and use in source and binary forms, with or without
   5 # modification, are permitted provided that the following conditions
   6 # are met:
   7 # 1. Redistributions of source code must retain the above copyright
   8 #    notice, this list of conditions and the following disclaimer.
   9 # 2. Redistributions in binary form must reproduce the above copyright
  10 #    notice, this list of conditions and the following disclaimer in the
  11 #    documentation and/or other materials provided with the distribution.
  12 #
  13 # THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
  14 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  15 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  16 # ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
  17 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  18 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  19 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  20 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  21 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  22 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  23 # SUCH DAMAGE.
  24 #
  25 # $FreeBSD: src/etc/network.subr,v 1.163 2005/06/30 04:52:47 brooks Exp $
  26 #
  27
  28 #
  29 # Subroutines commonly used from network startup scripts.
  30 # Requires that rc.conf be loaded first.
  31 #
  32
  33 # ifconfig_up if
  34 #       Evaluate ifconfig(8) arguments for interface $if and
  35 #       run ifconfig(8) with those arguments. It returns 0 if
  36 #       arguments were found and executed or 1 if the interface
  37 #       had no arguments.  Pseudo arguments DHCP and WPA are handled
  38 #       here.
  39 #
  40 ifconfig_up()
  41 {
  42         _cfg=1
  43
  44         ifconfig_args=`ifconfig_getargs $1`
  45         if [ -n "${ifconfig_args}" ]; then
  46                 ifconfig $1 ${ifconfig_args}
  47                 _cfg=0
  48         fi
  49
  50         if wpaif $1; then
  51                 /etc/rc.d/wpa_supplicant start $1
  52                 _cfg=0          # XXX: not sure this should count
  53         fi
  54
  55         if dhcpif $1; then
  56                 /etc/rc.d/dhclient start $1
  57                 _cfg=0
  58         fi
  59
  60         return $_cfg
  61 }
  62
  63 # ifconfig_down if
  64 #       Remove all inet entries from the $if interface. It returns
  65 #       0 if inet entries were found and removed. It returns 1 if
  66 #       no entries were found or they could not be removed.
  67 #
  68 ifconfig_down()
  69 {
  70         [ -z "$1" ] && return 1
  71         _ifs="^"
  72         _cfg=1
  73
  74         inetList="`ifconfig $1 | grep 'inet ' | tr "\n" "$_ifs"`"
  75
  76         oldifs="$IFS"
  77         IFS="$_ifs"
  78         for _inet in $inetList ; do
  79                 # get rid of extraneous line
  80                 [ -z "$_inet" ] && break
  81
  82                 _inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
  83
  84                 IFS="$oldifs"
  85                 ifconfig $1 ${_inet} delete
  86                 IFS="$_ifs"
  87                 _cfg=0
  88         done
  89         IFS="$oldifs"
  90
  91         if wpaif $1; then
  92                 /etc/rc.d/wpa_supplicant stop $1
  93         fi
  94
  95         if dhcpif $1; then
  96                 /etc/rc.d/dhclient stop $1
  97                 _cfg=0
  98         fi
  99
 100         return $_cfg
 101 }
 102
 103 # get_if_var if var [default]
 104 #       Return the value of the pseudo-hash corresponding to $if where
 105 #       $var is a string containg the sub-string "IF" which will be
 106 #       replaced with $if after the characters defined in _punct are
 107 #       replaced with '_'. If the variable is unset, replace it with
 108 #       $default if given.
 109 get_if_var()
 110 {
 111         local _if _punct_c _punct _var _default prefix suffix
 112
 113         if [ $# -ne 2 -a $# -ne 3 ]; then
 114                 err 3 'USAGE: get_if_var name var [default]'
 115         fi
 116
 117         _if=$1
 118         _punct=". - / +"
 119         for _punct_c in $_punct; do
 120                 _if=`ltr ${_if} ${_punct_c} '_'`
 121         done
 122         _var=$2
 123         _default=$3
 124
 125         prefix=${_var%%IF*}
 126         suffix=${_var##*IF}
 127         eval echo \${${prefix}${_if}${suffix}-${_default}}
 128 }
 129
 130 # _ifconfig_getargs if
 131 #       Echos the arguments for the supplied interface to stdout.
 132 #       returns 1 if empty.  In general, ifconfig_getargs should be used
 133 #       outside this file.
 134 _ifconfig_getargs()
 135 {
 136         _ifn=$1
 137         if [ -z "$_ifn" ]; then
 138                 return 1
 139         fi
 140
 141         _args=`get_if_var $_ifn ifconfig_IF`
 142         if [ -z "$_args" -a -n "${pccard_ifconfig}" ]; then
 143                 for _if in ${removable_interfaces} ; do
 144                         if [ "$_if" = "$_ifn" ] ; then
 145                                 _args=${pccard_ifconfig}
 146                                 break
 147                         fi
 148                 done
 149         fi
 150
 151         echo $_args
 152 }
 153
 154 # ifconfig_getargs if
 155 #       Takes the result from _ifconfig_getargs and removes pseudo
 156 #       args such as DHCP and WPA.
 157 ifconfig_getargs()
 158 {
 159         _tmpargs=`_ifconfig_getargs $1`
 160         if [ $? -eq 1 ]; then
 161                 return 1
 162         fi
 163         _args=
 164
 165         is_optarg=no
 166         for _arg in $_tmpargs; do
 167                 if [ "$is_optarg" = "no" ]; then
 168                         case $_arg in
 169                         [Dd][Hh][Cc][Pp])
 170                                 ;;
 171                         [Ww][Pp][Aa])
 172                                 ;;
 173                         *)
 174                                 _args="$_args $_arg"
 175                                 case $_arg in
 176                                 authmode)
 177                                         is_optarg=yes
 178                                         ;;
 179                                 esac
 180                                 ;;
 181                         esac
 182                 else
 183                         _args="$_args $_arg"
 184                         is_optarg=no
 185                 fi
 186         done
 187
 188         echo $_args
 189 }
 190
 191 # dhcpif if
 192 #       Returns 0 if the interface is a DHCP interface and 1 otherwise.
 193 dhcpif()
 194 {
 195         _tmpargs=`_ifconfig_getargs $1`
 196         for _arg in $_tmpargs; do
 197                 case $_arg in
 198                 [Dd][Hh][Cc][Pp])
 199                         return 0
 200                         ;;
 201                 esac
 202         done
 203         return 1
 204 }
 205
 206 # wpaif if
 207 #       Returns 0 if the interface is a WPA interface and 1 otherwise.
 208 wpaif()
 209 {
 210         _tmpargs=`_ifconfig_getargs $1`
 211         is_optarg=no
 212         for _arg in $_tmpargs; do
 213                 if [ "$is_optarg" = "no" ]; then
 214                         case $_arg in
 215                         [Ww][Pp][Aa])
 216                                 return 0
 217                                 ;;
 218                         authmode)
 219                                 is_optarg=yes
 220                                 ;;
 221                         esac
 222                 else
 223                         is_optarg=no
 224                 fi
 225         done
 226         return 1
 227 }
 228
 229 # ifalias_up if
 230 #       Configure aliases for network interface $if.
 231 #       It returns 0 if at least one alias was configured or
 232 #       1 if there were none.
 233 #
 234 ifalias_up()
 235 {
 236         _ret=1
 237         alias=0
 238         while : ; do
 239                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
 240                 if [ -n "${ifconfig_args}" ]; then
 241                         ifconfig $1 ${ifconfig_args} alias
 242                         alias=$((${alias} + 1))
 243                         _ret=0
 244                 else
 245                         break
 246                 fi
 247         done
 248         return $_ret
 249 }
 250
 251 #ifalias_down if
 252 #       Remove aliases for network interface $if.
 253 #       It returns 0 if at least one alias was removed or
 254 #       1 if there were none.
 255 #
 256 ifalias_down()
 257 {
 258         _ret=1
 259         alias=0
 260         while : ; do
 261                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
 262                 if [ -n "${ifconfig_args}" ]; then
 263                         ifconfig $1 ${ifconfig_args} -alias
 264                         alias=$((${alias} + 1))
 265                         _ret=0
 266                 else
 267                         break
 268                 fi
 269         done
 270         return $_ret
 271 }
 272
 273 # ifscript_up if
 274 #       Evaluate a startup script for the $if interface.
 275 #       It returns 0 if a script was found and processed or
 276 #       1 if no script was found.
 277 #
 278 ifscript_up()
 279 {
 280         if [ -r /etc/start_if.$1 ]; then
 281                 . /etc/start_if.$1
 282                 return 0
 283         fi
 284         return 1
 285 }
 286
 287 # ifscript_down if
 288 #       Evaluate a shutdown script for the $if interface.
 289 #       It returns 0 if a script was found and processed or
 290 #       1 if no script was found.
 291 #
 292 ifscript_down()
 293 {
 294         if [ -r /etc/stop_if.$1 ]; then
 295                 . /etc/stop_if.$1
 296                 return 0
 297         fi
 298         return 1
 299 }
 300
 301 # Create cloneable interfaces.
 302 #
 303 clone_up()
 304 {
 305         _prefix=
 306         _list=
 307         for ifn in ${cloned_interfaces}; do
 308                 ifconfig ${ifn} create
 309                 if [ $? -eq 0 ]; then
 310                         _list="${_list}${_prefix}${ifn}"
 311                         [ -z "$_prefix" ] && _prefix=' '
 312                 fi
 313         done
 314         debug "Cloned: ${_list}"
 315 }
 316
 317 # Destroy cloned interfaces. Destroyed interfaces are echoed
 318 # to standard output.
 319 #
 320 clone_down()
 321 {
 322         _prefix=
 323         _list=
 324         for ifn in ${cloned_interfaces}; do
 325                 ifconfig ${ifn} destroy
 326                 if [ $? -eq 0 ]; then
 327                         _list="${_list}${_prefix}${ifn}"
 328                         [ -z "$_prefix" ] && _prefix=' '
 329                 fi
 330         done
 331         debug "Destroyed clones: ${_list}"
 332 }
 333
 334 gif_up() {
 335         case ${gif_interfaces} in
 336         [Nn][Oo] | '')
 337                 ;;
 338         *)
 339                 for i in ${gif_interfaces}; do
 340                         eval peers=\$gifconfig_$i
 341                         case ${peers} in
 342                         '')
 343                                 continue
 344                                 ;;
 345                         *)
 346                                 ifconfig $i create >/dev/null 2>&1
 347                                 ifconfig $i tunnel ${peers}
 348                                 ifconfig $i up
 349                                 ;;
 350                         esac
 351                 done
 352                 ;;
 353         esac
 354 }
 355
 356 # ifnet_rename
 357 #       Rename all requested interfaces.
 358 #
 359 ifnet_rename()
 360 {
 361
 362         _ifn_list="`ifconfig -l`"
 363         [ -z "$_ifn_list" ] && return 0
 364         for _if in ${_ifn_list} ; do
 365                 _ifname=`get_if_var $_if ifconfig_IF_name`
 366                 if [ ! -z "$_ifname" ]; then
 367                         ifconfig $_if name $_ifname
 368                 fi
 369         done
 370         return 0
 371 }
 372
 373 #
 374 # list_net_interfaces type
 375 #       List all network interfaces. The type of interface returned
 376 #       can be controlled by the type argument. The type
 377 #       argument can be any of the following:
 378 #               nodhcp - all interfaces, excluding DHCP configured interfaces
 379 #               dhcp   - list only DHCP configured interfaces
 380 #       If no argument is specified all network interfaces are output.
 381 #       Note that the list will include cloned interfaces if applicable.
 382 #       Cloned interfaces must already exist to have a chance to appear
 383 #       in the list if ${network_interfaces} is set to `auto'.
 384 #
 385 list_net_interfaces()
 386 {
 387         type=$1
 388
 389         # Get a list of ALL the interfaces.  NOTE: cloned interfaces
 390         # have already been configured so they should show up in the
 391         # ifconfig -l output.
 392         #
 393         case ${network_interfaces} in
 394         [Aa][Uu][Tt][Oo])
 395                 _autolist="`ifconfig -l` `sysctl -in net.wlan.devices`"
 396                 _lo=
 397                 for _if in ${_autolist} ; do
 398                         if [ "$_if" = "lo0" ]; then
 399                                 _lo="lo0"
 400                         else
 401                                 _tmplist="${_tmplist} ${_if}"
 402                         fi
 403                 done
 404                 _tmplist="${_lo} ${_tmplist}"
 405                 ;;
 406         *)
 407                 _tmplist="${network_interfaces} ${cloned_interfaces}"
 408                 ;;
 409         esac
 410
 411         if [ -z "$type" ]; then
 412                 echo $_tmplist
 413                 return 0
 414         fi
 415
 416         # Separate out dhcp and non-dhcp interfaces
 417         #
 418         _aprefix=
 419         _bprefix=
 420         for _if in ${_tmplist} ; do
 421                 eval _ifarg="\$ifconfig_${_if}"
 422                 case "$_ifarg" in
 423                 [Dd][Hh][Cc][Pp])
 424                         _dhcplist="${_dhcplist}${_aprefix}${_if}"
 425                         [ -z "$_aprefix" ] && _aprefix=' '
 426                         ;;
 427                 ''|*)
 428                         _nodhcplist="${_nodhcplist}${_bprefix}${_if}"
 429                         [ -z "$_bprefix" ] && _bprefix=' '
 430                         ;;
 431                 esac
 432         done
 433
 434         case "$type" in
 435         nodhcp)
 436                 echo $_nodhcplist
 437                 ;;
 438         dhcp)
 439                 echo $_dhcplist
 440                 ;;
 441         esac
 442         return 0
 443 }
 444
 445 hexdigit()
 446 {
 447         if [ $1 -lt 10 ]; then
 448                 echo $1
 449         else
 450                 case $1 in
 451                 10)     echo a ;;
 452                 11)     echo b ;;
 453                 12)     echo c ;;
 454                 13)     echo d ;;
 455                 14)     echo e ;;
 456                 15)     echo f ;;
 457                 esac
 458         fi
 459 }
 460
 461 hexprint()
 462 {
 463         val=$1
 464         str=''
 465
 466         dig=`hexdigit $((${val} & 15))`
 467         str=${dig}${str}
 468         val=$((${val} >> 4))
 469         while [ ${val} -gt 0 ]; do
 470                 dig=`hexdigit $((${val} & 15))`
 471                 str=${dig}${str}
 472                 val=$((${val} >> 4))
 473         done
 474
 475         echo ${str}
 476 }
 477
 478 # Setup the interfaces for IPv6
 479 network6_interface_setup()
 480 {
 481         interfaces=$*
 482         rtsol_interfaces=''
 483         case ${ipv6_gateway_enable} in
 484         [Yy][Ee][Ss])
 485                 rtsol_available=no
 486                 ;;
 487         *)
 488                 rtsol_available=yes
 489                 ;;
 490         esac
 491         for i in $interfaces; do
 492                 rtsol_interface=yes
 493                 prefix=`get_if_var $i ipv6_prefix_IF`
 494                 if [ -n "${prefix}" ]; then
 495                         rtsol_available=no
 496                         rtsol_interface=no
 497                         laddr=`network6_getladdr $i`
 498                         hostid=`expr "${laddr}" : 'fe80::\(.*\)%\(.*\)'`
 499                         for j in ${prefix}; do
 500                                 address=$j\:${hostid}
 501                                 ifconfig $i inet6 ${address} prefixlen 64 alias
 502
 503                                 case ${ipv6_gateway_enable} in
 504                                 [Yy][Ee][Ss])
 505                                         # subnet-router anycast address
 506                                         # (rfc2373)
 507                                         ifconfig $i inet6 $j:: prefixlen 64 \
 508                                                 alias anycast
 509                                         ;;
 510                                 esac
 511                         done
 512                 fi
 513                 ipv6_ifconfig=`get_if_var $i ipv6_ifconfig_IF`
 514                 if [ -n "${ipv6_ifconfig}" ]; then
 515                         rtsol_available=no
 516                         rtsol_interface=no
 517                         ifconfig $i inet6 ${ipv6_ifconfig} alias
 518                 fi
 519
 520                 if [ ${rtsol_available} = yes -a ${rtsol_interface} = yes ]
 521                 then
 522                         case ${i} in
 523                         lo0|gif[0-9]*|stf[0-9]*|faith[0-9]*|lp[0-9]*|sl[0-9]*|tun[0-9]*)
 524                                 ;;
 525                         *)
 526                                 rtsol_interfaces="${rtsol_interfaces} ${i}"
 527                                 ;;
 528                         esac
 529                 else
 530                         ifconfig $i inet6
 531                 fi
 532         done
 533
 534         if [ ${rtsol_available} = yes -a -n "${rtsol_interfaces}" ]; then
 535                 # Act as endhost - automatically configured.
 536                 # You can configure only single interface, as
 537                 # specification assumes that autoconfigured host has
 538                 # single interface only.
 539                 sysctl net.inet6.ip6.accept_rtadv=1
 540                 set ${rtsol_interfaces}
 541                 ifconfig $1 up
 542                 rtsol $1
 543         fi
 544
 545         for i in $interfaces; do
 546                 alias=0
 547                 while : ; do
 548                         ipv6_ifconfig=`get_if_var $i ipv6_ifconfig_IF_alias${alias}`
 549                         if [ -z "${ipv6_ifconfig}" ]; then
 550                                 break;
 551                         fi
 552                         ifconfig $i inet6 ${ipv6_ifconfig} alias
 553                         alias=$((${alias} + 1))
 554                 done
 555         done
 556 }
 557
 558 # Setup IPv6 to IPv4 mapping
 559 network6_stf_setup()
 560 {
 561         case ${stf_interface_ipv4addr} in
 562         [Nn][Oo] | '')
 563                 ;;
 564         *)
 565                 # assign IPv6 addr and interface route for 6to4 interface
 566                 stf_prefixlen=$((16+${stf_interface_ipv4plen:-0}))
 567                 OIFS="$IFS"
 568                 IFS=".$IFS"
 569                 set ${stf_interface_ipv4addr}
 570                 IFS="$OIFS"
 571                 hexfrag1=`hexprint $(($1*256 + $2))`
 572                 hexfrag2=`hexprint $(($3*256 + $4))`
 573                 ipv4_in_hexformat="${hexfrag1}:${hexfrag2}"
 574                 case ${stf_interface_ipv6_ifid} in
 575                 [Aa][Uu][Tt][Oo] | '')
 576                         for i in ${ipv6_network_interfaces}; do
 577                                 laddr=`network6_getladdr ${i}`
 578                                 case ${laddr} in
 579                                 '')
 580                                         ;;
 581                                 *)
 582                                         break
 583                                         ;;
 584                                 esac
 585                         done
 586                         stf_interface_ipv6_ifid=`expr "${laddr}" : \
 587                                                       'fe80::\(.*\)%\(.*\)'`
 588                         case ${stf_interface_ipv6_ifid} in
 589                         '')
 590                                 stf_interface_ipv6_ifid=0:0:0:1
 591                                 ;;
 592                         esac
 593                         ;;
 594                 esac
 595                 ifconfig stf0 create >/dev/null 2>&1
 596                 ifconfig stf0 inet6 2002:${ipv4_in_hexformat}:${stf_interface_ipv6_slaid:-0}:${stf_interface_ipv6_ifid} \
 597                         prefixlen ${stf_prefixlen}
 598                 # disallow packets to malicious 6to4 prefix
 599                 route add -inet6 2002:e000:: -prefixlen 20 ::1 -reject
 600                 route add -inet6 2002:7f00:: -prefixlen 24 ::1 -reject
 601                 route add -inet6 2002:0000:: -prefixlen 24 ::1 -reject
 602                 route add -inet6 2002:ff00:: -prefixlen 24 ::1 -reject
 603                 ;;
 604         esac
 605 }
 606
 607 # Setup static routes
 608 network6_static_routes_setup()
 609 {
 610         # Set up any static routes.
 611         case ${ipv6_defaultrouter} in
 612         [Nn][Oo] | '')
 613                 ;;
 614         *)
 615                 ipv6_static_routes="default ${ipv6_static_routes}"
 616                 ipv6_route_default="default ${ipv6_defaultrouter}"
 617                 ;;
 618         esac
 619         case ${ipv6_static_routes} in
 620         [Nn][Oo] | '')
 621                 ;;
 622         *)
 623                 for i in ${ipv6_static_routes}; do
 624                         eval ipv6_route_args=\$ipv6_route_${i}
 625                         route add -inet6 ${ipv6_route_args}
 626                 done
 627                 ;;
 628         esac
 629 }
 630
 631 # Setup faith
 632 network6_faith_setup()
 633 {
 634         case ${ipv6_faith_prefix} in
 635         [Nn][Oo] | '')
 636                 ;;
 637         *)
 638                 sysctl net.inet6.ip6.keepfaith=1
 639                 ifconfig faith0 create >/dev/null 2>&1
 640                 ifconfig faith0 up
 641                 for prefix in ${ipv6_faith_prefix}; do
 642                         prefixlen=`expr "${prefix}" : ".*/\(.*\)"`
 643                         case ${prefixlen} in
 644                         '')
 645                                 prefixlen=96
 646                                 ;;
 647                         *)
 648                                 prefix=`expr "${prefix}" : \
 649                                              "\(.*\)/${prefixlen}"`
 650                                 ;;
 651                         esac
 652                         route add -inet6 ${prefix} -prefixlen ${prefixlen} ::1
 653                         route change -inet6 ${prefix} -prefixlen ${prefixlen} \
 654                                 -ifp faith0
 655                 done
 656                 ;;
 657         esac
 658 }
 659
 660 # Install the "default interface" to kernel, which will be used
 661 # as the default route when there's no router.
 662 network6_default_interface_setup()
 663 {
 664         # Choose IPv6 default interface if it is not clearly specified.
 665         case ${ipv6_default_interface} in
 666         '')
 667                 for i in ${ipv6_network_interfaces}; do
 668                         case $i in
 669                         lo0|faith[0-9]*)
 670                                 continue
 671                                 ;;
 672                         esac
 673                         laddr=`network6_getladdr $i exclude_tentative`
 674                         case ${laddr} in
 675                         '')
 676                                 ;;
 677                         *)
 678                                 ipv6_default_interface=$i
 679                                 break
 680                                 ;;
 681                         esac
 682                 done
 683                 ;;
 684         esac
 685
 686         # Disallow unicast packets without outgoing scope identifiers,
 687         # or route such packets to a "default" interface, if it is specified.
 688         route add -inet6 fe80:: -prefixlen 10 ::1 -reject
 689         case ${ipv6_default_interface} in
 690         [Nn][Oo] | '')
 691                 route add -inet6 ff02:: -prefixlen 16 ::1 -reject
 692                 ;;
 693         *)
 694                 laddr=`network6_getladdr ${ipv6_default_interface}`
 695                 route add -inet6 ff02:: ${laddr} -prefixlen 16 -interface \
 696                         -cloning
 697
 698                 # Disable installing the default interface with the
 699                 # case net.inet6.ip6.forwarding=0 and
 700                 # net.inet6.ip6.accept_rtadv=0, due to avoid conflict
 701                 # between the default router list and the manual
 702                 # configured default route.
 703                 case ${ipv6_gateway_enable} in
 704                 [Yy][Ee][Ss])
 705                         ;;
 706                 *)
 707                         if [ `sysctl -n net.inet6.ip6.accept_rtadv` -eq 1 ]
 708                         then
 709                                 ndp -I ${ipv6_default_interface}
 710                         fi
 711                         ;;
 712                 esac
 713                 ;;
 714         esac
 715 }
 716
 717 network6_getladdr()
 718 {
 719         ifconfig $1 2>/dev/null | while read proto addr rest; do
 720                 case ${proto} in
 721                 inet6)
 722                         case ${addr} in
 723                         fe80::*)
 724                                 if [ -z "$2" ]; then
 725                                         echo ${addr}
 726                                         return
 727                                 fi
 728                                 case ${rest} in
 729                                 *tentative*)
 730                                         continue
 731                                         ;;
 732                                 *)
 733                                         echo ${addr}
 734                                         return
 735                                 esac
 736                         esac
 737                 esac
 738         done
 739 }