Update physio(9) for physread()/physwrite() separation.
[dragonfly.git] / sys / netinet6 / udp6_output.c
blobbdb93c0bba63494b0d19dd043420b461b0a92f66
1 /* $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $ */
2 /* $DragonFly: src/sys/netinet6/udp6_output.c,v 1.9 2008/09/04 09:08:22 hasso Exp $ */
3 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
5 /*
6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7 * All rights reserved.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
35 * Copyright (c) 1982, 1986, 1989, 1993
36 * The Regents of the University of California. All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the University of
49 * California, Berkeley and its contributors.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64 * SUCH DAMAGE.
66 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/syslog.h>
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
90 #include <netinet/in.h>
91 #include <netinet/in_var.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/ip_var.h>
95 #include <netinet/in_pcb.h>
96 #include <netinet/udp.h>
97 #include <netinet/udp_var.h>
98 #include <netinet/ip6.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/in6_pcb.h>
101 #include <netinet6/udp6_var.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/ip6protosw.h>
105 #ifdef IPSEC
106 #include <netinet6/ipsec.h>
107 #ifdef INET6
108 #include <netinet6/ipsec6.h>
109 #endif
110 #endif /* IPSEC */
112 #include <net/net_osdep.h>
115 * UDP protocol inplementation.
116 * Per RFC 768, August, 1980.
119 #define in6pcb inpcb
120 #define udp6stat udpstat
121 #define udp6s_opackets udps_opackets
124 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
125 struct mbuf *control, struct thread *td)
127 u_int32_t ulen = m->m_pkthdr.len;
128 u_int32_t plen = sizeof(struct udphdr) + ulen;
129 struct ip6_hdr *ip6;
130 struct udphdr *udp6;
131 struct in6_addr *laddr, *faddr;
132 u_short fport;
133 int error = 0;
134 struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
135 int priv;
136 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
137 int flags;
138 struct sockaddr_in6 tmp;
140 priv = !suser(td); /* 1 if privilaged, 0 if not */
141 if (control) {
142 if ((error = ip6_setpktoptions(control, &opt,
143 in6p->in6p_outputopts,
144 IPPROTO_UDP, priv)) != 0)
145 goto release;
146 in6p->in6p_outputopts = &opt;
149 if (addr6) {
151 * IPv4 version of udp_output calls in_pcbconnect in this case,
152 * which needs splnet and affects performance.
153 * Since we saw no essential reason for calling in_pcbconnect,
154 * we get rid of such kind of logic, and call in6_selectsrc
155 * and in6_pcbsetport in order to fill in the local address
156 * and the local port.
158 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
159 if (sin6->sin6_port == 0) {
160 error = EADDRNOTAVAIL;
161 goto release;
164 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
165 /* how about ::ffff:0.0.0.0 case? */
166 error = EISCONN;
167 goto release;
169 if (!prison_remote_ip(td, (struct sockaddr *)addr6)) {
170 error = EAFNOSUPPORT; /* IPv4 only jail */
171 goto release;
174 /* protect *sin6 from overwrites */
175 tmp = *sin6;
176 sin6 = &tmp;
178 faddr = &sin6->sin6_addr;
179 fport = sin6->sin6_port; /* allow 0 port */
181 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
182 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
184 * I believe we should explicitly discard the
185 * packet when mapped addresses are disabled,
186 * rather than send the packet as an IPv6 one.
187 * If we chose the latter approach, the packet
188 * might be sent out on the wire based on the
189 * default route, the situation which we'd
190 * probably want to avoid.
191 * (20010421 jinmei@kame.net)
193 error = EINVAL;
194 goto release;
195 } else
196 af = AF_INET;
199 /* KAME hack: embed scopeid */
200 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
201 error = EINVAL;
202 goto release;
205 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
206 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
207 in6p->in6p_moptions,
208 &in6p->in6p_route,
209 &in6p->in6p_laddr, &error, NULL);
210 } else
211 laddr = &in6p->in6p_laddr; /* XXX */
212 if (laddr == NULL) {
213 if (error == 0)
214 error = EADDRNOTAVAIL;
215 goto release;
217 if (in6p->in6p_lport == 0 &&
218 (error = in6_pcbsetport(laddr, in6p, td)) != 0)
219 goto release;
220 } else {
221 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
222 error = ENOTCONN;
223 goto release;
225 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
226 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
228 * XXX: this case would happen when the
229 * application sets the V6ONLY flag after
230 * connecting the foreign address.
231 * Such applications should be fixed,
232 * so we bark here.
234 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
235 "option was set for a connected socket\n");
236 error = EINVAL;
237 goto release;
238 } else
239 af = AF_INET;
241 laddr = &in6p->in6p_laddr;
242 faddr = &in6p->in6p_faddr;
243 fport = in6p->in6p_fport;
246 if (af == AF_INET)
247 hlen = sizeof(struct ip);
250 * Calculate data length and get a mbuf
251 * for UDP and IP6 headers.
253 M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
254 if (m == 0) {
255 error = ENOBUFS;
256 goto release;
260 * Stuff checksum and output datagram.
262 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
263 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
264 udp6->uh_dport = fport;
265 if (plen <= 0xffff)
266 udp6->uh_ulen = htons((u_short)plen);
267 else
268 udp6->uh_ulen = 0;
269 udp6->uh_sum = 0;
271 switch (af) {
272 case AF_INET6:
273 ip6 = mtod(m, struct ip6_hdr *);
274 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
275 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
276 ip6->ip6_vfc |= IPV6_VERSION;
277 #if 0 /* ip6_plen will be filled in ip6_output. */
278 ip6->ip6_plen = htons((u_short)plen);
279 #endif
280 ip6->ip6_nxt = IPPROTO_UDP;
281 ip6->ip6_hlim = in6_selecthlim(in6p,
282 in6p->in6p_route.ro_rt ?
283 in6p->in6p_route.ro_rt->rt_ifp : NULL);
284 ip6->ip6_src = *laddr;
285 ip6->ip6_dst = *faddr;
287 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
288 sizeof(struct ip6_hdr), plen)) == 0) {
289 udp6->uh_sum = 0xffff;
292 flags = 0;
294 udp6stat.udp6s_opackets++;
295 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
296 flags, in6p->in6p_moptions, NULL, in6p);
297 break;
298 case AF_INET:
299 error = EAFNOSUPPORT;
300 goto release;
302 goto releaseopt;
304 release:
305 m_freem(m);
307 releaseopt:
308 if (control) {
309 ip6_clearpktopts(in6p->in6p_outputopts, -1);
310 in6p->in6p_outputopts = stickyopt;
311 m_freem(control);
313 return (error);