2 * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by the Computer Systems
16 * Engineering Group at Lawrence Berkeley Laboratory.
17 * 4. Neither the name of the University nor of the Laboratory may be used
18 * to endorse or promote products derived from this software without
19 * specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 static const char rcsid
[] _U_
=
36 "@(#) $Header: /tcpdump/master/libpcap/pcap.c,v 1.128 2008-12-23 20:13:29 guy Exp $ (LBL)";
44 #include <pcap-stdinc.h>
51 #ifdef HAVE_SYS_BITYPES_H
52 #include <sys/bitypes.h>
54 #include <sys/types.h>
60 #if !defined(_MSC_VER) && !defined(__BORLANDC__) && !defined(__MINGW32__)
66 #ifdef HAVE_OS_PROTO_H
82 pcap_not_initialized(pcap_t
*pcap
)
84 /* this means 'not initialized' */
85 return (PCAP_ERROR_NOT_ACTIVATED
);
89 * Returns 1 if rfmon mode can be set on the pcap_t, 0 if it can't,
90 * a PCAP_ERROR value on an error.
93 pcap_can_set_rfmon(pcap_t
*p
)
95 return (p
->can_set_rfmon_op(p
));
99 * For systems where rfmon mode is never supported.
102 pcap_cant_set_rfmon(pcap_t
*p _U_
)
108 * Sets *tstamp_typesp to point to an array 1 or more supported time stamp
109 * types; the return value is the number of supported time stamp types.
110 * The list should be freed by a call to pcap_free_tstamp_types() when
111 * you're done with it.
113 * A return value of 0 means "you don't get a choice of time stamp type",
114 * in which case *tstamp_typesp is set to null.
116 * PCAP_ERROR is returned on error.
119 pcap_list_tstamp_types(pcap_t
*p
, int **tstamp_typesp
)
121 if (p
->tstamp_type_count
== 0) {
123 * We don't support multiple time stamp types.
125 *tstamp_typesp
= NULL
;
127 *tstamp_typesp
= (int*)calloc(sizeof(**tstamp_typesp
),
128 p
->tstamp_type_count
);
129 if (*tstamp_typesp
== NULL
) {
130 (void)snprintf(p
->errbuf
, sizeof(p
->errbuf
),
131 "malloc: %s", pcap_strerror(errno
));
134 (void)memcpy(*tstamp_typesp
, p
->tstamp_type_list
,
135 sizeof(**tstamp_typesp
) * p
->tstamp_type_count
);
137 return (p
->tstamp_type_count
);
141 * In Windows, you might have a library built with one version of the
142 * C runtime library and an application built with another version of
143 * the C runtime library, which means that the library might use one
144 * version of malloc() and free() and the application might use another
145 * version of malloc() and free(). If so, that means something
146 * allocated by the library cannot be freed by the application, so we
147 * need to have a pcap_free_tstamp_types() routine to free up the list
148 * allocated by pcap_list_tstamp_types(), even though it's just a wrapper
152 pcap_free_tstamp_types(int *tstamp_type_list
)
154 free(tstamp_type_list
);
158 * Default one-shot callback; overridden for capture types where the
159 * packet data cannot be guaranteed to be available after the callback
160 * returns, so that a copy must be made.
163 pcap_oneshot(u_char
*user
, const struct pcap_pkthdr
*h
, const u_char
*pkt
)
165 struct oneshot_userdata
*sp
= (struct oneshot_userdata
*)user
;
172 pcap_next(pcap_t
*p
, struct pcap_pkthdr
*h
)
174 struct oneshot_userdata s
;
180 if (pcap_dispatch(p
, 1, p
->oneshot_callback
, (u_char
*)&s
) <= 0)
186 pcap_next_ex(pcap_t
*p
, struct pcap_pkthdr
**pkt_header
,
187 const u_char
**pkt_data
)
189 struct oneshot_userdata s
;
191 s
.hdr
= &p
->pcap_header
;
195 /* Saves a pointer to the packet headers */
196 *pkt_header
= &p
->pcap_header
;
198 if (p
->sf
.rfile
!= NULL
) {
201 /* We are on an offline capture */
202 status
= pcap_offline_read(p
, 1, p
->oneshot_callback
,
206 * Return codes for pcap_offline_read() are:
210 * The first one ('0') conflicts with the return code of
211 * 0 from pcap_read() meaning "no packets arrived before
212 * the timeout expired", so we map it to -2 so you can
213 * distinguish between an EOF from a savefile and a
214 * "no packets arrived before the timeout expired, try
215 * again" from a live capture.
224 * Return codes for pcap_read() are:
227 * - -2: loop was broken out of with pcap_breakloop()
229 * The first one ('0') conflicts with the return code of 0 from
230 * pcap_offline_read() meaning "end of file".
232 return (p
->read_op(p
, 1, p
->oneshot_callback
, (u_char
*)&s
));
236 initialize_ops(pcap_t
*p
)
239 * Set operation pointers for operations that only work on
240 * an activated pcap_t to point to a routine that returns
241 * a "this isn't activated" error.
243 p
->read_op
= (read_op_t
)pcap_not_initialized
;
244 p
->inject_op
= (inject_op_t
)pcap_not_initialized
;
245 p
->setfilter_op
= (setfilter_op_t
)pcap_not_initialized
;
246 p
->setdirection_op
= (setdirection_op_t
)pcap_not_initialized
;
247 p
->set_datalink_op
= (set_datalink_op_t
)pcap_not_initialized
;
248 p
->getnonblock_op
= (getnonblock_op_t
)pcap_not_initialized
;
249 p
->setnonblock_op
= (setnonblock_op_t
)pcap_not_initialized
;
250 p
->stats_op
= (stats_op_t
)pcap_not_initialized
;
252 p
->setbuff_op
= (setbuff_op_t
)pcap_not_initialized
;
253 p
->setmode_op
= (setmode_op_t
)pcap_not_initialized
;
254 p
->setmintocopy_op
= (setmintocopy_op_t
)pcap_not_initialized
;
258 * Default cleanup operation - implementations can override
259 * this, but should call pcap_cleanup_live_common() after
260 * doing their own additional cleanup.
262 p
->cleanup_op
= pcap_cleanup_live_common
;
265 * In most cases, the standard one-short callback can
266 * be used for pcap_next()/pcap_next_ex().
268 p
->oneshot_callback
= pcap_oneshot
;
272 pcap_create_common(const char *source
, char *ebuf
)
276 p
= malloc(sizeof(*p
));
278 snprintf(ebuf
, PCAP_ERRBUF_SIZE
, "malloc: %s",
279 pcap_strerror(errno
));
282 memset(p
, 0, sizeof(*p
));
284 p
->fd
= -1; /* not opened yet */
285 p
->selectable_fd
= -1;
289 p
->opt
.source
= strdup(source
);
290 if (p
->opt
.source
== NULL
) {
291 snprintf(ebuf
, PCAP_ERRBUF_SIZE
, "malloc: %s",
292 pcap_strerror(errno
));
298 * Default to "can't set rfmon mode"; if it's supported by
299 * a platform, the create routine that called us can set
300 * the op to its routine to check whether a particular
301 * device supports it.
303 p
->can_set_rfmon_op
= pcap_cant_set_rfmon
;
307 /* put in some defaults*/
308 pcap_set_timeout(p
, 0);
309 pcap_set_snaplen(p
, 65535); /* max packet size */
311 p
->opt
.buffer_size
= 0;
312 p
->opt
.tstamp_type
= -1; /* default to not setting time stamp type */
317 pcap_check_activated(pcap_t
*p
)
320 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
, "can't perform "
321 " operation on activated capture");
328 pcap_set_snaplen(pcap_t
*p
, int snaplen
)
330 if (pcap_check_activated(p
))
331 return (PCAP_ERROR_ACTIVATED
);
332 p
->snapshot
= snaplen
;
337 pcap_set_promisc(pcap_t
*p
, int promisc
)
339 if (pcap_check_activated(p
))
340 return (PCAP_ERROR_ACTIVATED
);
341 p
->opt
.promisc
= promisc
;
346 pcap_set_rfmon(pcap_t
*p
, int rfmon
)
348 if (pcap_check_activated(p
))
349 return (PCAP_ERROR_ACTIVATED
);
350 p
->opt
.rfmon
= rfmon
;
355 pcap_set_timeout(pcap_t
*p
, int timeout_ms
)
357 if (pcap_check_activated(p
))
358 return (PCAP_ERROR_ACTIVATED
);
359 p
->md
.timeout
= timeout_ms
;
364 pcap_set_tstamp_type(pcap_t
*p
, int tstamp_type
)
368 if (pcap_check_activated(p
))
369 return (PCAP_ERROR_ACTIVATED
);
372 * If p->tstamp_type_count is 0, we don't support setting
373 * the time stamp type at all.
375 if (p
->tstamp_type_count
== 0)
376 return (PCAP_ERROR_CANTSET_TSTAMP_TYPE
);
379 * Check whether we claim to support this type of time stamp.
381 for (i
= 0; i
< p
->tstamp_type_count
; i
++) {
382 if (p
->tstamp_type_list
[i
] == tstamp_type
) {
386 p
->opt
.tstamp_type
= tstamp_type
;
392 * No. We support setting the time stamp type, but not to this
395 return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP
);
399 pcap_set_buffer_size(pcap_t
*p
, int buffer_size
)
401 if (pcap_check_activated(p
))
402 return (PCAP_ERROR_ACTIVATED
);
403 p
->opt
.buffer_size
= buffer_size
;
408 pcap_activate(pcap_t
*p
)
413 * Catch attempts to re-activate an already-activated
414 * pcap_t; this should, for example, catch code that
415 * calls pcap_open_live() followed by pcap_activate(),
416 * as some code that showed up in a Stack Exchange
419 if (pcap_check_activated(p
))
420 return (PCAP_ERROR_ACTIVATED
);
421 status
= p
->activate_op(p
);
425 if (p
->errbuf
[0] == '\0') {
427 * No error message supplied by the activate routine;
428 * for the benefit of programs that don't specially
429 * handle errors other than PCAP_ERROR, return the
430 * error message corresponding to the status.
432 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
, "%s",
433 pcap_statustostr(status
));
437 * Undo any operation pointer setting, etc. done by
438 * the activate operation.
446 pcap_open_live(const char *source
, int snaplen
, int promisc
, int to_ms
, char *errbuf
)
451 p
= pcap_create(source
, errbuf
);
454 status
= pcap_set_snaplen(p
, snaplen
);
457 status
= pcap_set_promisc(p
, promisc
);
460 status
= pcap_set_timeout(p
, to_ms
);
464 * Mark this as opened with pcap_open_live(), so that, for
465 * example, we show the full list of DLT_ values, rather
466 * than just the ones that are compatible with capturing
467 * when not in monitor mode. That allows existing applications
468 * to work the way they used to work, but allows new applications
469 * that know about the new open API to, for example, find out the
470 * DLT_ values that they can select without changing whether
471 * the adapter is in monitor mode or not.
474 status
= pcap_activate(p
);
479 if (status
== PCAP_ERROR
)
480 snprintf(errbuf
, PCAP_ERRBUF_SIZE
, "%s: %s", source
,
482 else if (status
== PCAP_ERROR_NO_SUCH_DEVICE
||
483 status
== PCAP_ERROR_PERM_DENIED
||
484 status
== PCAP_ERROR_PROMISC_PERM_DENIED
)
485 snprintf(errbuf
, PCAP_ERRBUF_SIZE
, "%s: %s (%s)", source
,
486 pcap_statustostr(status
), p
->errbuf
);
488 snprintf(errbuf
, PCAP_ERRBUF_SIZE
, "%s: %s", source
,
489 pcap_statustostr(status
));
495 pcap_dispatch(pcap_t
*p
, int cnt
, pcap_handler callback
, u_char
*user
)
497 return (p
->read_op(p
, cnt
, callback
, user
));
501 * XXX - is this necessary?
504 pcap_read(pcap_t
*p
, int cnt
, pcap_handler callback
, u_char
*user
)
507 return (p
->read_op(p
, cnt
, callback
, user
));
511 pcap_loop(pcap_t
*p
, int cnt
, pcap_handler callback
, u_char
*user
)
516 if (p
->sf
.rfile
!= NULL
) {
518 * 0 means EOF, so don't loop if we get 0.
520 n
= pcap_offline_read(p
, cnt
, callback
, user
);
523 * XXX keep reading until we get something
524 * (or an error occurs)
527 n
= p
->read_op(p
, cnt
, callback
, user
);
541 * Force the loop in "pcap_read()" or "pcap_read_offline()" to terminate.
544 pcap_breakloop(pcap_t
*p
)
550 pcap_datalink(pcap_t
*p
)
552 return (p
->linktype
);
556 pcap_datalink_ext(pcap_t
*p
)
558 return (p
->linktype_ext
);
562 pcap_list_datalinks(pcap_t
*p
, int **dlt_buffer
)
564 if (p
->dlt_count
== 0) {
566 * We couldn't fetch the list of DLTs, which means
567 * this platform doesn't support changing the
568 * DLT for an interface. Return a list of DLTs
569 * containing only the DLT this device supports.
571 *dlt_buffer
= (int*)malloc(sizeof(**dlt_buffer
));
572 if (*dlt_buffer
== NULL
) {
573 (void)snprintf(p
->errbuf
, sizeof(p
->errbuf
),
574 "malloc: %s", pcap_strerror(errno
));
577 **dlt_buffer
= p
->linktype
;
580 *dlt_buffer
= (int*)calloc(sizeof(**dlt_buffer
), p
->dlt_count
);
581 if (*dlt_buffer
== NULL
) {
582 (void)snprintf(p
->errbuf
, sizeof(p
->errbuf
),
583 "malloc: %s", pcap_strerror(errno
));
586 (void)memcpy(*dlt_buffer
, p
->dlt_list
,
587 sizeof(**dlt_buffer
) * p
->dlt_count
);
588 return (p
->dlt_count
);
593 * In Windows, you might have a library built with one version of the
594 * C runtime library and an application built with another version of
595 * the C runtime library, which means that the library might use one
596 * version of malloc() and free() and the application might use another
597 * version of malloc() and free(). If so, that means something
598 * allocated by the library cannot be freed by the application, so we
599 * need to have a pcap_free_datalinks() routine to free up the list
600 * allocated by pcap_list_datalinks(), even though it's just a wrapper
604 pcap_free_datalinks(int *dlt_list
)
610 pcap_set_datalink(pcap_t
*p
, int dlt
)
613 const char *dlt_name
;
615 if (p
->dlt_count
== 0 || p
->set_datalink_op
== NULL
) {
617 * We couldn't fetch the list of DLTs, or we don't
618 * have a "set datalink" operation, which means
619 * this platform doesn't support changing the
620 * DLT for an interface. Check whether the new
621 * DLT is the one this interface supports.
623 if (p
->linktype
!= dlt
)
627 * It is, so there's nothing we need to do here.
631 for (i
= 0; i
< p
->dlt_count
; i
++)
632 if (p
->dlt_list
[i
] == dlt
)
634 if (i
>= p
->dlt_count
)
636 if (p
->dlt_count
== 2 && p
->dlt_list
[0] == DLT_EN10MB
&&
639 * This is presumably an Ethernet device, as the first
640 * link-layer type it offers is DLT_EN10MB, and the only
641 * other type it offers is DLT_DOCSIS. That means that
642 * we can't tell the driver to supply DOCSIS link-layer
643 * headers - we're just pretending that's what we're
644 * getting, as, presumably, we're capturing on a dedicated
645 * link to a Cisco Cable Modem Termination System, and
646 * it's putting raw DOCSIS frames on the wire inside low-level
652 if (p
->set_datalink_op(p
, dlt
) == -1)
658 dlt_name
= pcap_datalink_val_to_name(dlt
);
659 if (dlt_name
!= NULL
) {
660 (void) snprintf(p
->errbuf
, sizeof(p
->errbuf
),
661 "%s is not one of the DLTs supported by this device",
664 (void) snprintf(p
->errbuf
, sizeof(p
->errbuf
),
665 "DLT %d is not one of the DLTs supported by this device",
672 * This array is designed for mapping upper and lower case letter
673 * together for a case independent comparison. The mappings are
674 * based upon ascii character sequences.
676 static const u_char charmap
[] = {
677 (u_char
)'\000', (u_char
)'\001', (u_char
)'\002', (u_char
)'\003',
678 (u_char
)'\004', (u_char
)'\005', (u_char
)'\006', (u_char
)'\007',
679 (u_char
)'\010', (u_char
)'\011', (u_char
)'\012', (u_char
)'\013',
680 (u_char
)'\014', (u_char
)'\015', (u_char
)'\016', (u_char
)'\017',
681 (u_char
)'\020', (u_char
)'\021', (u_char
)'\022', (u_char
)'\023',
682 (u_char
)'\024', (u_char
)'\025', (u_char
)'\026', (u_char
)'\027',
683 (u_char
)'\030', (u_char
)'\031', (u_char
)'\032', (u_char
)'\033',
684 (u_char
)'\034', (u_char
)'\035', (u_char
)'\036', (u_char
)'\037',
685 (u_char
)'\040', (u_char
)'\041', (u_char
)'\042', (u_char
)'\043',
686 (u_char
)'\044', (u_char
)'\045', (u_char
)'\046', (u_char
)'\047',
687 (u_char
)'\050', (u_char
)'\051', (u_char
)'\052', (u_char
)'\053',
688 (u_char
)'\054', (u_char
)'\055', (u_char
)'\056', (u_char
)'\057',
689 (u_char
)'\060', (u_char
)'\061', (u_char
)'\062', (u_char
)'\063',
690 (u_char
)'\064', (u_char
)'\065', (u_char
)'\066', (u_char
)'\067',
691 (u_char
)'\070', (u_char
)'\071', (u_char
)'\072', (u_char
)'\073',
692 (u_char
)'\074', (u_char
)'\075', (u_char
)'\076', (u_char
)'\077',
693 (u_char
)'\100', (u_char
)'\141', (u_char
)'\142', (u_char
)'\143',
694 (u_char
)'\144', (u_char
)'\145', (u_char
)'\146', (u_char
)'\147',
695 (u_char
)'\150', (u_char
)'\151', (u_char
)'\152', (u_char
)'\153',
696 (u_char
)'\154', (u_char
)'\155', (u_char
)'\156', (u_char
)'\157',
697 (u_char
)'\160', (u_char
)'\161', (u_char
)'\162', (u_char
)'\163',
698 (u_char
)'\164', (u_char
)'\165', (u_char
)'\166', (u_char
)'\167',
699 (u_char
)'\170', (u_char
)'\171', (u_char
)'\172', (u_char
)'\133',
700 (u_char
)'\134', (u_char
)'\135', (u_char
)'\136', (u_char
)'\137',
701 (u_char
)'\140', (u_char
)'\141', (u_char
)'\142', (u_char
)'\143',
702 (u_char
)'\144', (u_char
)'\145', (u_char
)'\146', (u_char
)'\147',
703 (u_char
)'\150', (u_char
)'\151', (u_char
)'\152', (u_char
)'\153',
704 (u_char
)'\154', (u_char
)'\155', (u_char
)'\156', (u_char
)'\157',
705 (u_char
)'\160', (u_char
)'\161', (u_char
)'\162', (u_char
)'\163',
706 (u_char
)'\164', (u_char
)'\165', (u_char
)'\166', (u_char
)'\167',
707 (u_char
)'\170', (u_char
)'\171', (u_char
)'\172', (u_char
)'\173',
708 (u_char
)'\174', (u_char
)'\175', (u_char
)'\176', (u_char
)'\177',
709 (u_char
)'\200', (u_char
)'\201', (u_char
)'\202', (u_char
)'\203',
710 (u_char
)'\204', (u_char
)'\205', (u_char
)'\206', (u_char
)'\207',
711 (u_char
)'\210', (u_char
)'\211', (u_char
)'\212', (u_char
)'\213',
712 (u_char
)'\214', (u_char
)'\215', (u_char
)'\216', (u_char
)'\217',
713 (u_char
)'\220', (u_char
)'\221', (u_char
)'\222', (u_char
)'\223',
714 (u_char
)'\224', (u_char
)'\225', (u_char
)'\226', (u_char
)'\227',
715 (u_char
)'\230', (u_char
)'\231', (u_char
)'\232', (u_char
)'\233',
716 (u_char
)'\234', (u_char
)'\235', (u_char
)'\236', (u_char
)'\237',
717 (u_char
)'\240', (u_char
)'\241', (u_char
)'\242', (u_char
)'\243',
718 (u_char
)'\244', (u_char
)'\245', (u_char
)'\246', (u_char
)'\247',
719 (u_char
)'\250', (u_char
)'\251', (u_char
)'\252', (u_char
)'\253',
720 (u_char
)'\254', (u_char
)'\255', (u_char
)'\256', (u_char
)'\257',
721 (u_char
)'\260', (u_char
)'\261', (u_char
)'\262', (u_char
)'\263',
722 (u_char
)'\264', (u_char
)'\265', (u_char
)'\266', (u_char
)'\267',
723 (u_char
)'\270', (u_char
)'\271', (u_char
)'\272', (u_char
)'\273',
724 (u_char
)'\274', (u_char
)'\275', (u_char
)'\276', (u_char
)'\277',
725 (u_char
)'\300', (u_char
)'\341', (u_char
)'\342', (u_char
)'\343',
726 (u_char
)'\344', (u_char
)'\345', (u_char
)'\346', (u_char
)'\347',
727 (u_char
)'\350', (u_char
)'\351', (u_char
)'\352', (u_char
)'\353',
728 (u_char
)'\354', (u_char
)'\355', (u_char
)'\356', (u_char
)'\357',
729 (u_char
)'\360', (u_char
)'\361', (u_char
)'\362', (u_char
)'\363',
730 (u_char
)'\364', (u_char
)'\365', (u_char
)'\366', (u_char
)'\367',
731 (u_char
)'\370', (u_char
)'\371', (u_char
)'\372', (u_char
)'\333',
732 (u_char
)'\334', (u_char
)'\335', (u_char
)'\336', (u_char
)'\337',
733 (u_char
)'\340', (u_char
)'\341', (u_char
)'\342', (u_char
)'\343',
734 (u_char
)'\344', (u_char
)'\345', (u_char
)'\346', (u_char
)'\347',
735 (u_char
)'\350', (u_char
)'\351', (u_char
)'\352', (u_char
)'\353',
736 (u_char
)'\354', (u_char
)'\355', (u_char
)'\356', (u_char
)'\357',
737 (u_char
)'\360', (u_char
)'\361', (u_char
)'\362', (u_char
)'\363',
738 (u_char
)'\364', (u_char
)'\365', (u_char
)'\366', (u_char
)'\367',
739 (u_char
)'\370', (u_char
)'\371', (u_char
)'\372', (u_char
)'\373',
740 (u_char
)'\374', (u_char
)'\375', (u_char
)'\376', (u_char
)'\377',
744 pcap_strcasecmp(const char *s1
, const char *s2
)
746 register const u_char
*cm
= charmap
,
747 *us1
= (const u_char
*)s1
,
748 *us2
= (const u_char
*)s2
;
750 while (cm
[*us1
] == cm
[*us2
++])
753 return (cm
[*us1
] - cm
[*--us2
]);
758 const char *description
;
762 #define DLT_CHOICE(code, description) { #code, description, code }
763 #define DLT_CHOICE_SENTINEL { NULL, NULL, 0 }
765 static struct dlt_choice dlt_choices
[] = {
766 DLT_CHOICE(DLT_NULL
, "BSD loopback"),
767 DLT_CHOICE(DLT_EN10MB
, "Ethernet"),
768 DLT_CHOICE(DLT_IEEE802
, "Token ring"),
769 DLT_CHOICE(DLT_ARCNET
, "BSD ARCNET"),
770 DLT_CHOICE(DLT_SLIP
, "SLIP"),
771 DLT_CHOICE(DLT_PPP
, "PPP"),
772 DLT_CHOICE(DLT_FDDI
, "FDDI"),
773 DLT_CHOICE(DLT_ATM_RFC1483
, "RFC 1483 LLC-encapsulated ATM"),
774 DLT_CHOICE(DLT_RAW
, "Raw IP"),
775 DLT_CHOICE(DLT_SLIP_BSDOS
, "BSD/OS SLIP"),
776 DLT_CHOICE(DLT_PPP_BSDOS
, "BSD/OS PPP"),
777 DLT_CHOICE(DLT_ATM_CLIP
, "Linux Classical IP-over-ATM"),
778 DLT_CHOICE(DLT_PPP_SERIAL
, "PPP over serial"),
779 DLT_CHOICE(DLT_PPP_ETHER
, "PPPoE"),
780 DLT_CHOICE(DLT_SYMANTEC_FIREWALL
, "Symantec Firewall"),
781 DLT_CHOICE(DLT_C_HDLC
, "Cisco HDLC"),
782 DLT_CHOICE(DLT_IEEE802_11
, "802.11"),
783 DLT_CHOICE(DLT_FRELAY
, "Frame Relay"),
784 DLT_CHOICE(DLT_LOOP
, "OpenBSD loopback"),
785 DLT_CHOICE(DLT_ENC
, "OpenBSD encapsulated IP"),
786 DLT_CHOICE(DLT_LINUX_SLL
, "Linux cooked"),
787 DLT_CHOICE(DLT_LTALK
, "Localtalk"),
788 DLT_CHOICE(DLT_PFLOG
, "OpenBSD pflog file"),
789 DLT_CHOICE(DLT_PRISM_HEADER
, "802.11 plus Prism header"),
790 DLT_CHOICE(DLT_IP_OVER_FC
, "RFC 2625 IP-over-Fibre Channel"),
791 DLT_CHOICE(DLT_SUNATM
, "Sun raw ATM"),
792 DLT_CHOICE(DLT_IEEE802_11_RADIO
, "802.11 plus radiotap header"),
793 DLT_CHOICE(DLT_ARCNET_LINUX
, "Linux ARCNET"),
794 DLT_CHOICE(DLT_JUNIPER_MLPPP
, "Juniper Multi-Link PPP"),
795 DLT_CHOICE(DLT_JUNIPER_MLFR
, "Juniper Multi-Link Frame Relay"),
796 DLT_CHOICE(DLT_JUNIPER_ES
, "Juniper Encryption Services PIC"),
797 DLT_CHOICE(DLT_JUNIPER_GGSN
, "Juniper GGSN PIC"),
798 DLT_CHOICE(DLT_JUNIPER_MFR
, "Juniper FRF.16 Frame Relay"),
799 DLT_CHOICE(DLT_JUNIPER_ATM2
, "Juniper ATM2 PIC"),
800 DLT_CHOICE(DLT_JUNIPER_SERVICES
, "Juniper Advanced Services PIC"),
801 DLT_CHOICE(DLT_JUNIPER_ATM1
, "Juniper ATM1 PIC"),
802 DLT_CHOICE(DLT_APPLE_IP_OVER_IEEE1394
, "Apple IP-over-IEEE 1394"),
803 DLT_CHOICE(DLT_MTP2_WITH_PHDR
, "SS7 MTP2 with Pseudo-header"),
804 DLT_CHOICE(DLT_MTP2
, "SS7 MTP2"),
805 DLT_CHOICE(DLT_MTP3
, "SS7 MTP3"),
806 DLT_CHOICE(DLT_SCCP
, "SS7 SCCP"),
807 DLT_CHOICE(DLT_DOCSIS
, "DOCSIS"),
808 DLT_CHOICE(DLT_LINUX_IRDA
, "Linux IrDA"),
809 DLT_CHOICE(DLT_IEEE802_11_RADIO_AVS
, "802.11 plus AVS radio information header"),
810 DLT_CHOICE(DLT_JUNIPER_MONITOR
, "Juniper Passive Monitor PIC"),
811 DLT_CHOICE(DLT_PPP_PPPD
, "PPP for pppd, with direction flag"),
812 DLT_CHOICE(DLT_JUNIPER_PPPOE
, "Juniper PPPoE"),
813 DLT_CHOICE(DLT_JUNIPER_PPPOE_ATM
, "Juniper PPPoE/ATM"),
814 DLT_CHOICE(DLT_GPRS_LLC
, "GPRS LLC"),
815 DLT_CHOICE(DLT_GPF_T
, "GPF-T"),
816 DLT_CHOICE(DLT_GPF_F
, "GPF-F"),
817 DLT_CHOICE(DLT_JUNIPER_PIC_PEER
, "Juniper PIC Peer"),
818 DLT_CHOICE(DLT_ERF_ETH
, "Ethernet with Endace ERF header"),
819 DLT_CHOICE(DLT_ERF_POS
, "Packet-over-SONET with Endace ERF header"),
820 DLT_CHOICE(DLT_LINUX_LAPD
, "Linux vISDN LAPD"),
821 DLT_CHOICE(DLT_JUNIPER_ETHER
, "Juniper Ethernet"),
822 DLT_CHOICE(DLT_JUNIPER_PPP
, "Juniper PPP"),
823 DLT_CHOICE(DLT_JUNIPER_FRELAY
, "Juniper Frame Relay"),
824 DLT_CHOICE(DLT_JUNIPER_CHDLC
, "Juniper C-HDLC"),
825 DLT_CHOICE(DLT_MFR
, "FRF.16 Frame Relay"),
826 DLT_CHOICE(DLT_JUNIPER_VP
, "Juniper Voice PIC"),
827 DLT_CHOICE(DLT_A429
, "Arinc 429"),
828 DLT_CHOICE(DLT_A653_ICM
, "Arinc 653 Interpartition Communication"),
829 DLT_CHOICE(DLT_USB
, "USB"),
830 DLT_CHOICE(DLT_BLUETOOTH_HCI_H4
, "Bluetooth HCI UART transport layer"),
831 DLT_CHOICE(DLT_IEEE802_16_MAC_CPS
, "IEEE 802.16 MAC Common Part Sublayer"),
832 DLT_CHOICE(DLT_USB_LINUX
, "USB with Linux header"),
833 DLT_CHOICE(DLT_CAN20B
, "Controller Area Network (CAN) v. 2.0B"),
834 DLT_CHOICE(DLT_IEEE802_15_4_LINUX
, "IEEE 802.15.4 with Linux padding"),
835 DLT_CHOICE(DLT_PPI
, "Per-Packet Information"),
836 DLT_CHOICE(DLT_IEEE802_16_MAC_CPS_RADIO
, "IEEE 802.16 MAC Common Part Sublayer plus radiotap header"),
837 DLT_CHOICE(DLT_JUNIPER_ISM
, "Juniper Integrated Service Module"),
838 DLT_CHOICE(DLT_IEEE802_15_4
, "IEEE 802.15.4 with FCS"),
839 DLT_CHOICE(DLT_SITA
, "SITA pseudo-header"),
840 DLT_CHOICE(DLT_ERF
, "Endace ERF header"),
841 DLT_CHOICE(DLT_RAIF1
, "Ethernet with u10 Networks pseudo-header"),
842 DLT_CHOICE(DLT_IPMB
, "IPMB"),
843 DLT_CHOICE(DLT_JUNIPER_ST
, "Juniper Secure Tunnel"),
844 DLT_CHOICE(DLT_BLUETOOTH_HCI_H4_WITH_PHDR
, "Bluetooth HCI UART transport layer plus pseudo-header"),
845 DLT_CHOICE(DLT_AX25_KISS
, "AX.25 with KISS header"),
846 DLT_CHOICE(DLT_IEEE802_15_4_NONASK_PHY
, "IEEE 802.15.4 with non-ASK PHY data"),
847 DLT_CHOICE(DLT_MPLS
, "MPLS with label as link-layer header"),
848 DLT_CHOICE(DLT_USB_LINUX_MMAPPED
, "USB with padded Linux header"),
849 DLT_CHOICE(DLT_DECT
, "DECT"),
850 DLT_CHOICE(DLT_AOS
, "AOS Space Data Link protocol"),
851 DLT_CHOICE(DLT_WIHART
, "Wireless HART"),
852 DLT_CHOICE(DLT_FC_2
, "Fibre Channel FC-2"),
853 DLT_CHOICE(DLT_FC_2_WITH_FRAME_DELIMS
, "Fibre Channel FC-2 with frame delimiters"),
854 DLT_CHOICE(DLT_IPNET
, "Solaris ipnet"),
855 DLT_CHOICE(DLT_CAN_SOCKETCAN
, "CAN-bus with SocketCAN headers"),
856 DLT_CHOICE(DLT_IPV4
, "Raw IPv4"),
857 DLT_CHOICE(DLT_IPV6
, "Raw IPv6"),
858 DLT_CHOICE(DLT_IEEE802_15_4_NOFCS
, "IEEE 802.15.4 without FCS"),
859 DLT_CHOICE(DLT_JUNIPER_VS
, "Juniper Virtual Server"),
860 DLT_CHOICE(DLT_JUNIPER_SRX_E2E
, "Juniper SRX E2E"),
861 DLT_CHOICE(DLT_JUNIPER_FIBRECHANNEL
, "Juniper Fibre Channel"),
862 DLT_CHOICE(DLT_DVB_CI
, "DVB-CI"),
863 DLT_CHOICE(DLT_JUNIPER_ATM_CEMIC
, "Juniper ATM CEMIC"),
864 DLT_CHOICE(DLT_NFLOG
, "Linux netfilter log messages"),
865 DLT_CHOICE(DLT_NETANALYZER
, "Ethernet with Hilscher netANALYZER pseudo-header"),
866 DLT_CHOICE(DLT_NETANALYZER_TRANSPARENT
, "Ethernet with Hilscher netANALYZER pseudo-header and with preamble and SFD"),
867 DLT_CHOICE(DLT_IPOIB
, "RFC 4391 IP-over-Infiniband"),
872 pcap_datalink_name_to_val(const char *name
)
876 for (i
= 0; dlt_choices
[i
].name
!= NULL
; i
++) {
877 if (pcap_strcasecmp(dlt_choices
[i
].name
+ sizeof("DLT_") - 1,
879 return (dlt_choices
[i
].dlt
);
885 pcap_datalink_val_to_name(int dlt
)
889 for (i
= 0; dlt_choices
[i
].name
!= NULL
; i
++) {
890 if (dlt_choices
[i
].dlt
== dlt
)
891 return (dlt_choices
[i
].name
+ sizeof("DLT_") - 1);
897 pcap_datalink_val_to_description(int dlt
)
901 for (i
= 0; dlt_choices
[i
].name
!= NULL
; i
++) {
902 if (dlt_choices
[i
].dlt
== dlt
)
903 return (dlt_choices
[i
].description
);
908 struct tstamp_type_choice
{
910 const char *description
;
914 static struct tstamp_type_choice tstamp_type_choices
[] = {
915 { "host", "Host", PCAP_TSTAMP_HOST
},
916 { "host_lowprec", "Host, low precision", PCAP_TSTAMP_HOST_LOWPREC
},
917 { "host_hiprec", "Host, high precision", PCAP_TSTAMP_HOST_HIPREC
},
918 { "adapter", "Adapter", PCAP_TSTAMP_ADAPTER
},
919 { "adapter_unsynced", "Adapter, not synced with system time", PCAP_TSTAMP_ADAPTER_UNSYNCED
},
924 pcap_tstamp_type_name_to_val(const char *name
)
928 for (i
= 0; tstamp_type_choices
[i
].name
!= NULL
; i
++) {
929 if (pcap_strcasecmp(tstamp_type_choices
[i
].name
, name
) == 0)
930 return (tstamp_type_choices
[i
].type
);
936 pcap_tstamp_type_val_to_name(int tstamp_type
)
940 for (i
= 0; tstamp_type_choices
[i
].name
!= NULL
; i
++) {
941 if (tstamp_type_choices
[i
].type
== tstamp_type
)
942 return (tstamp_type_choices
[i
].name
);
948 pcap_tstamp_type_val_to_description(int tstamp_type
)
952 for (i
= 0; tstamp_type_choices
[i
].name
!= NULL
; i
++) {
953 if (tstamp_type_choices
[i
].type
== tstamp_type
)
954 return (tstamp_type_choices
[i
].description
);
960 pcap_snapshot(pcap_t
*p
)
962 return (p
->snapshot
);
966 pcap_is_swapped(pcap_t
*p
)
968 return (p
->sf
.swapped
);
972 pcap_major_version(pcap_t
*p
)
974 return (p
->sf
.version_major
);
978 pcap_minor_version(pcap_t
*p
)
980 return (p
->sf
.version_minor
);
986 return (p
->sf
.rfile
);
990 pcap_fileno(pcap_t
*p
)
995 if (p
->adapter
!= NULL
)
996 return ((int)(DWORD
)p
->adapter
->hFile
);
1002 #if !defined(WIN32) && !defined(MSDOS)
1004 pcap_get_selectable_fd(pcap_t
*p
)
1006 return (p
->selectable_fd
);
1011 pcap_perror(pcap_t
*p
, char *prefix
)
1013 fprintf(stderr
, "%s: %s\n", prefix
, p
->errbuf
);
1017 pcap_geterr(pcap_t
*p
)
1023 pcap_getnonblock(pcap_t
*p
, char *errbuf
)
1025 return (p
->getnonblock_op(p
, errbuf
));
1029 * Get the current non-blocking mode setting, under the assumption that
1030 * it's just the standard POSIX non-blocking flag.
1032 * We don't look at "p->nonblock", in case somebody tweaked the FD
1035 #if !defined(WIN32) && !defined(MSDOS)
1037 pcap_getnonblock_fd(pcap_t
*p
, char *errbuf
)
1041 fdflags
= fcntl(p
->fd
, F_GETFL
, 0);
1042 if (fdflags
== -1) {
1043 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
, "F_GETFL: %s",
1044 pcap_strerror(errno
));
1047 if (fdflags
& O_NONBLOCK
)
1055 pcap_setnonblock(pcap_t
*p
, int nonblock
, char *errbuf
)
1057 return (p
->setnonblock_op(p
, nonblock
, errbuf
));
1060 #if !defined(WIN32) && !defined(MSDOS)
1062 * Set non-blocking mode, under the assumption that it's just the
1063 * standard POSIX non-blocking flag. (This can be called by the
1064 * per-platform non-blocking-mode routine if that routine also
1065 * needs to do some additional work.)
1068 pcap_setnonblock_fd(pcap_t
*p
, int nonblock
, char *errbuf
)
1072 fdflags
= fcntl(p
->fd
, F_GETFL
, 0);
1073 if (fdflags
== -1) {
1074 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
, "F_GETFL: %s",
1075 pcap_strerror(errno
));
1079 fdflags
|= O_NONBLOCK
;
1081 fdflags
&= ~O_NONBLOCK
;
1082 if (fcntl(p
->fd
, F_SETFL
, fdflags
) == -1) {
1083 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
, "F_SETFL: %s",
1084 pcap_strerror(errno
));
1093 * Generate a string for the last Win32-specific error (i.e. an error generated when
1094 * calling a Win32 API).
1095 * For errors occurred during standard C calls, we still use pcap_strerror()
1098 pcap_win32strerror(void)
1101 static char errbuf
[PCAP_ERRBUF_SIZE
+1];
1105 error
= GetLastError();
1106 FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
, NULL
, error
, 0, errbuf
,
1107 PCAP_ERRBUF_SIZE
, NULL
);
1110 * "FormatMessage()" "helpfully" sticks CR/LF at the end of the
1111 * message. Get rid of it.
1113 errlen
= strlen(errbuf
);
1115 errbuf
[errlen
- 1] = '\0';
1116 errbuf
[errlen
- 2] = '\0';
1118 p
= strchr(errbuf
, '\0');
1119 snprintf (p
, sizeof(errbuf
)-(p
-errbuf
), " (%lu)", error
);
1125 * Generate error strings for PCAP_ERROR_ and PCAP_WARNING_ values.
1128 pcap_statustostr(int errnum
)
1130 static char ebuf
[15+10+1];
1135 return("Generic warning");
1137 case PCAP_WARNING_TSTAMP_TYPE_NOTSUP
:
1138 return ("That type of time stamp is not supported by that device");
1140 case PCAP_WARNING_PROMISC_NOTSUP
:
1141 return ("That device doesn't support promiscuous mode");
1144 return("Generic error");
1146 case PCAP_ERROR_BREAK
:
1147 return("Loop terminated by pcap_breakloop");
1149 case PCAP_ERROR_NOT_ACTIVATED
:
1150 return("The pcap_t has not been activated");
1152 case PCAP_ERROR_ACTIVATED
:
1153 return ("The setting can't be changed after the pcap_t is activated");
1155 case PCAP_ERROR_NO_SUCH_DEVICE
:
1156 return ("No such device exists");
1158 case PCAP_ERROR_RFMON_NOTSUP
:
1159 return ("That device doesn't support monitor mode");
1161 case PCAP_ERROR_NOT_RFMON
:
1162 return ("That operation is supported only in monitor mode");
1164 case PCAP_ERROR_PERM_DENIED
:
1165 return ("You don't have permission to capture on that device");
1167 case PCAP_ERROR_IFACE_NOT_UP
:
1168 return ("That device is not up");
1170 case PCAP_ERROR_CANTSET_TSTAMP_TYPE
:
1171 return ("That device doesn't support setting the time stamp type");
1173 case PCAP_ERROR_PROMISC_PERM_DENIED
:
1174 return ("You don't have permission to capture in promiscuous mode on that device");
1176 (void)snprintf(ebuf
, sizeof ebuf
, "Unknown error: %d", errnum
);
1181 * Not all systems have strerror().
1184 pcap_strerror(int errnum
)
1186 #ifdef HAVE_STRERROR
1187 return (strerror(errnum
));
1189 extern int sys_nerr
;
1190 extern const char *const sys_errlist
[];
1191 static char ebuf
[15+10+1];
1193 if ((unsigned int)errnum
< sys_nerr
)
1194 return ((char *)sys_errlist
[errnum
]);
1195 (void)snprintf(ebuf
, sizeof ebuf
, "Unknown error: %d", errnum
);
1201 pcap_setfilter(pcap_t
*p
, struct bpf_program
*fp
)
1203 return (p
->setfilter_op(p
, fp
));
1207 * Set direction flag, which controls whether we accept only incoming
1208 * packets, only outgoing packets, or both.
1209 * Note that, depending on the platform, some or all direction arguments
1210 * might not be supported.
1213 pcap_setdirection(pcap_t
*p
, pcap_direction_t d
)
1215 if (p
->setdirection_op
== NULL
) {
1216 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
,
1217 "Setting direction is not implemented on this platform");
1220 return (p
->setdirection_op(p
, d
));
1224 pcap_stats(pcap_t
*p
, struct pcap_stat
*ps
)
1226 return (p
->stats_op(p
, ps
));
1230 pcap_stats_dead(pcap_t
*p
, struct pcap_stat
*ps _U_
)
1232 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
,
1233 "Statistics aren't available from a pcap_open_dead pcap_t");
1239 pcap_setbuff(pcap_t
*p
, int dim
)
1241 return (p
->setbuff_op(p
, dim
));
1245 pcap_setbuff_dead(pcap_t
*p
, int dim
)
1247 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
,
1248 "The kernel buffer size cannot be set on a pcap_open_dead pcap_t");
1253 pcap_setmode(pcap_t
*p
, int mode
)
1255 return (p
->setmode_op(p
, mode
));
1259 pcap_setmode_dead(pcap_t
*p
, int mode
)
1261 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
,
1262 "impossible to set mode on a pcap_open_dead pcap_t");
1267 pcap_setmintocopy(pcap_t
*p
, int size
)
1269 return (p
->setmintocopy_op(p
, size
));
1273 pcap_setmintocopy_dead(pcap_t
*p
, int size
)
1275 snprintf(p
->errbuf
, PCAP_ERRBUF_SIZE
,
1276 "The mintocopy parameter cannot be set on a pcap_open_dead pcap_t");
1282 * On some platforms, we need to clean up promiscuous or monitor mode
1283 * when we close a device - and we want that to happen even if the
1284 * application just exits without explicitl closing devices.
1285 * On those platforms, we need to register a "close all the pcaps"
1286 * routine to be called when we exit, and need to maintain a list of
1287 * pcaps that need to be closed to clean up modes.
1289 * XXX - not thread-safe.
1293 * List of pcaps on which we've done something that needs to be
1295 * If there are any such pcaps, we arrange to call "pcap_close_all()"
1296 * when we exit, and have it close all of them.
1298 static struct pcap
*pcaps_to_close
;
1301 * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
1302 * be called on exit.
1304 static int did_atexit
;
1307 pcap_close_all(void)
1309 struct pcap
*handle
;
1311 while ((handle
= pcaps_to_close
) != NULL
)
1316 pcap_do_addexit(pcap_t
*p
)
1319 * If we haven't already done so, arrange to have
1320 * "pcap_close_all()" called when we exit.
1323 if (atexit(pcap_close_all
) == -1) {
1325 * "atexit()" failed; let our caller know.
1327 strncpy(p
->errbuf
, "atexit failed",
1337 pcap_add_to_pcaps_to_close(pcap_t
*p
)
1339 p
->md
.next
= pcaps_to_close
;
1344 pcap_remove_from_pcaps_to_close(pcap_t
*p
)
1346 pcap_t
*pc
, *prevpc
;
1348 for (pc
= pcaps_to_close
, prevpc
= NULL
; pc
!= NULL
;
1349 prevpc
= pc
, pc
= pc
->md
.next
) {
1352 * Found it. Remove it from the list.
1354 if (prevpc
== NULL
) {
1356 * It was at the head of the list.
1358 pcaps_to_close
= pc
->md
.next
;
1361 * It was in the middle of the list.
1363 prevpc
->md
.next
= pc
->md
.next
;
1371 pcap_cleanup_live_common(pcap_t
*p
)
1373 if (p
->buffer
!= NULL
) {
1377 if (p
->dlt_list
!= NULL
) {
1382 if (p
->tstamp_type_list
!= NULL
) {
1383 free(p
->tstamp_type_list
);
1384 p
->tstamp_type_list
= NULL
;
1385 p
->tstamp_type_count
= 0;
1387 pcap_freecode(&p
->fcode
);
1388 #if !defined(WIN32) && !defined(MSDOS)
1393 p
->selectable_fd
= -1;
1399 pcap_cleanup_dead(pcap_t
*p _U_
)
1401 /* Nothing to do. */
1405 pcap_open_dead(int linktype
, int snaplen
)
1409 p
= malloc(sizeof(*p
));
1412 memset (p
, 0, sizeof(*p
));
1413 p
->snapshot
= snaplen
;
1414 p
->linktype
= linktype
;
1415 p
->stats_op
= pcap_stats_dead
;
1417 p
->setbuff_op
= pcap_setbuff_dead
;
1418 p
->setmode_op
= pcap_setmode_dead
;
1419 p
->setmintocopy_op
= pcap_setmintocopy_dead
;
1421 p
->cleanup_op
= pcap_cleanup_dead
;
1427 * API compatible with WinPcap's "send a packet" routine - returns -1
1428 * on error, 0 otherwise.
1430 * XXX - what if we get a short write?
1433 pcap_sendpacket(pcap_t
*p
, const u_char
*buf
, int size
)
1435 if (p
->inject_op(p
, buf
, size
) == -1)
1441 * API compatible with OpenBSD's "send a packet" routine - returns -1 on
1442 * error, number of bytes written otherwise.
1445 pcap_inject(pcap_t
*p
, const void *buf
, size_t size
)
1447 return (p
->inject_op(p
, buf
, size
));
1451 pcap_close(pcap_t
*p
)
1453 if (p
->opt
.source
!= NULL
)
1454 free(p
->opt
.source
);
1460 * Given a BPF program, a pcap_pkthdr structure for a packet, and the raw
1461 * data for the packet, check whether the packet passes the filter.
1462 * Returns the return value of the filter program, which will be zero if
1463 * the packet doesn't pass and non-zero if the packet does pass.
1466 pcap_offline_filter(struct bpf_program
*fp
, const struct pcap_pkthdr
*h
,
1469 struct bpf_insn
*fcode
= fp
->bf_insns
;
1472 return (bpf_filter(fcode
, pkt
, h
->len
, h
->caplen
));
1478 * We make the version string static, and return a pointer to it, rather
1479 * than exporting the version string directly. On at least some UNIXes,
1480 * if you import data from a shared library into an program, the data is
1481 * bound into the program binary, so if the string in the version of the
1482 * library with which the program was linked isn't the same as the
1483 * string in the version of the library with which the program is being
1484 * run, various undesirable things may happen (warnings, the string
1485 * being the one from the version of the library with which the program
1486 * was linked, or even weirder things, such as the string being the one
1487 * from the library but being truncated).
1489 #ifdef HAVE_VERSION_H
1490 #include "version.h"
1492 static const char pcap_version_string
[] = "libpcap version 1.x.y";
1497 * XXX - it'd be nice if we could somehow generate the WinPcap and libpcap
1498 * version numbers when building WinPcap. (It'd be nice to do so for
1499 * the packet.dll version number as well.)
1501 static const char wpcap_version_string
[] = "4.0";
1502 static const char pcap_version_string_fmt
[] =
1503 "WinPcap version %s, based on %s";
1504 static const char pcap_version_string_packet_dll_fmt
[] =
1505 "WinPcap version %s (packet.dll version %s), based on %s";
1506 static char *full_pcap_version_string
;
1509 pcap_lib_version(void)
1511 char *packet_version_string
;
1512 size_t full_pcap_version_string_len
;
1514 if (full_pcap_version_string
== NULL
) {
1516 * Generate the version string.
1518 packet_version_string
= PacketGetVersion();
1519 if (strcmp(wpcap_version_string
, packet_version_string
) == 0) {
1521 * WinPcap version string and packet.dll version
1522 * string are the same; just report the WinPcap
1525 full_pcap_version_string_len
=
1526 (sizeof pcap_version_string_fmt
- 4) +
1527 strlen(wpcap_version_string
) +
1528 strlen(pcap_version_string
);
1529 full_pcap_version_string
=
1530 malloc(full_pcap_version_string_len
);
1531 sprintf(full_pcap_version_string
,
1532 pcap_version_string_fmt
, wpcap_version_string
,
1533 pcap_version_string
);
1536 * WinPcap version string and packet.dll version
1537 * string are different; that shouldn't be the
1538 * case (the two libraries should come from the
1539 * same version of WinPcap), so we report both
1542 full_pcap_version_string_len
=
1543 (sizeof pcap_version_string_packet_dll_fmt
- 6) +
1544 strlen(wpcap_version_string
) +
1545 strlen(packet_version_string
) +
1546 strlen(pcap_version_string
);
1547 full_pcap_version_string
= malloc(full_pcap_version_string_len
);
1549 sprintf(full_pcap_version_string
,
1550 pcap_version_string_packet_dll_fmt
,
1551 wpcap_version_string
, packet_version_string
,
1552 pcap_version_string
);
1555 return (full_pcap_version_string
);
1558 #elif defined(MSDOS)
1560 static char *full_pcap_version_string
;
1563 pcap_lib_version (void)
1565 char *packet_version_string
;
1566 size_t full_pcap_version_string_len
;
1567 static char dospfx
[] = "DOS-";
1569 if (full_pcap_version_string
== NULL
) {
1571 * Generate the version string.
1573 full_pcap_version_string_len
=
1574 sizeof dospfx
+ strlen(pcap_version_string
);
1575 full_pcap_version_string
=
1576 malloc(full_pcap_version_string_len
);
1577 strcpy(full_pcap_version_string
, dospfx
);
1578 strcat(full_pcap_version_string
, pcap_version_string
);
1580 return (full_pcap_version_string
);
1586 pcap_lib_version(void)
1588 return (pcap_version_string
);