4 * Copyright (c) 1998-2010 The DragonFly Project. All rights reserved.
6 * This code is derived from software contributed to The DragonFly Project
7 * by Matthew Dillon <dillon@backplane.com>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in
17 * the documentation and/or other materials provided with the
19 * 3. Neither the name of The DragonFly Project nor the names of its
20 * contributors may be used to endorse or promote products derived
21 * from this software without specific, prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
27 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * Copyright (c) 1994 John S. Dyson
37 * Copyright (c) 1990 University of Utah.
38 * Copyright (c) 1991, 1993
39 * The Regents of the University of California. All rights reserved.
41 * This code is derived from software contributed to Berkeley by
42 * the Systems Programming Group of the University of Utah Computer
45 * Redistribution and use in source and binary forms, with or without
46 * modification, are permitted provided that the following conditions
48 * 1. Redistributions of source code must retain the above copyright
49 * notice, this list of conditions and the following disclaimer.
50 * 2. Redistributions in binary form must reproduce the above copyright
51 * notice, this list of conditions and the following disclaimer in the
52 * documentation and/or other materials provided with the distribution.
53 * 3. Neither the name of the University nor the names of its contributors
54 * may be used to endorse or promote products derived from this software
55 * without specific prior written permission.
57 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
58 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
59 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
60 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
61 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
62 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
63 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
64 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
65 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
66 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
72 * Radix Bitmap 'blists'.
74 * - The new swapper uses the new radix bitmap code. This should scale
75 * to arbitrarily small or arbitrarily large swap spaces and an almost
76 * arbitrary degree of fragmentation.
80 * - on the fly reallocation of swap during putpages. The new system
81 * does not try to keep previously allocated swap blocks for dirty
84 * - on the fly deallocation of swap
86 * - No more garbage collection required. Unnecessarily allocated swap
87 * blocks only exist for dirty vm_page_t's now and these are already
88 * cycled (in a high-load system) by the pager. We also do on-the-fly
89 * removal of invalidated swap blocks when a page is destroyed
92 * from: Utah $Hdr: swap_pager.c 1.4 91/04/30$
93 * @(#)swap_pager.c 8.9 (Berkeley) 3/21/94
94 * $FreeBSD: src/sys/vm/swap_pager.c,v 1.130.2.12 2002/08/31 21:15:55 dillon Exp $
97 #include <sys/param.h>
98 #include <sys/systm.h>
100 #include <sys/kernel.h>
101 #include <sys/proc.h>
103 #include <sys/vnode.h>
104 #include <sys/malloc.h>
105 #include <sys/vmmeter.h>
106 #include <sys/sysctl.h>
107 #include <sys/blist.h>
108 #include <sys/lock.h>
109 #include <sys/kcollect.h>
112 #include "opt_swap.h"
114 #include <vm/vm_object.h>
115 #include <vm/vm_page.h>
116 #include <vm/vm_pager.h>
117 #include <vm/vm_pageout.h>
118 #include <vm/swap_pager.h>
119 #include <vm/vm_extern.h>
120 #include <vm/vm_zone.h>
121 #include <vm/vnode_pager.h>
123 #include <sys/thread2.h>
124 #include <sys/buf2.h>
125 #include <vm/vm_page2.h>
127 #ifndef MAX_PAGEOUT_CLUSTER
128 #define MAX_PAGEOUT_CLUSTER SWB_NPAGES
131 #define SWM_FREE 0x02 /* free, period */
132 #define SWM_POP 0x04 /* pop out */
134 #define SWBIO_READ 0x01
135 #define SWBIO_WRITE 0x02
136 #define SWBIO_SYNC 0x04
137 #define SWBIO_TTC 0x08 /* for VM_PAGER_TRY_TO_CACHE */
143 vm_pindex_t endi
; /* inclusive */
146 struct swswapoffinfo
{
153 * vm_swap_size is in page-sized chunks now. It was DEV_BSIZE'd chunks
157 int swap_pager_full
; /* swap space exhaustion (task killing) */
158 int swap_fail_ticks
; /* when we became exhausted */
159 int swap_pager_almost_full
; /* swap space exhaustion (w/ hysteresis)*/
160 swblk_t vm_swap_cache_use
;
161 swblk_t vm_swap_anon_use
;
162 static int vm_report_swap_allocs
;
164 static int nsw_rcount
; /* free read buffers */
165 static int nsw_wcount_sync
; /* limit write buffers / synchronous */
166 static int nsw_wcount_async
; /* limit write buffers / asynchronous */
167 static int nsw_wcount_async_max
;/* assigned maximum */
168 static int nsw_cluster_max
; /* maximum VOP I/O allowed */
170 struct blist
*swapblist
;
171 static int swap_async_max
= 4; /* maximum in-progress async I/O's */
172 static int swap_burst_read
= 0; /* allow burst reading */
173 static swblk_t swapiterator
; /* linearize allocations */
174 int swap_user_async
= 0; /* user swap pager operation can be async */
176 static struct spinlock swapbp_spin
= SPINLOCK_INITIALIZER(&swapbp_spin
, "swapbp_spin");
179 extern struct vnode
*swapdev_vp
;
180 extern struct swdevt
*swdevt
;
183 #define BLK2DEVIDX(blk) (nswdev > 1 ? blk / SWB_DMMAX % nswdev : 0)
185 SYSCTL_INT(_vm
, OID_AUTO
, swap_async_max
,
186 CTLFLAG_RW
, &swap_async_max
, 0, "Maximum running async swap ops");
187 SYSCTL_INT(_vm
, OID_AUTO
, swap_burst_read
,
188 CTLFLAG_RW
, &swap_burst_read
, 0, "Allow burst reads for pageins");
189 SYSCTL_INT(_vm
, OID_AUTO
, swap_user_async
,
190 CTLFLAG_RW
, &swap_user_async
, 0, "Allow async uuser swap write I/O");
193 SYSCTL_LONG(_vm
, OID_AUTO
, swap_cache_use
,
194 CTLFLAG_RD
, &vm_swap_cache_use
, 0, "");
195 SYSCTL_LONG(_vm
, OID_AUTO
, swap_anon_use
,
196 CTLFLAG_RD
, &vm_swap_anon_use
, 0, "");
197 SYSCTL_LONG(_vm
, OID_AUTO
, swap_size
,
198 CTLFLAG_RD
, &vm_swap_size
, 0, "");
200 SYSCTL_INT(_vm
, OID_AUTO
, swap_cache_use
,
201 CTLFLAG_RD
, &vm_swap_cache_use
, 0, "");
202 SYSCTL_INT(_vm
, OID_AUTO
, swap_anon_use
,
203 CTLFLAG_RD
, &vm_swap_anon_use
, 0, "");
204 SYSCTL_INT(_vm
, OID_AUTO
, swap_size
,
205 CTLFLAG_RD
, &vm_swap_size
, 0, "");
207 SYSCTL_INT(_vm
, OID_AUTO
, report_swap_allocs
,
208 CTLFLAG_RW
, &vm_report_swap_allocs
, 0, "");
213 * Red-Black tree for swblock entries
215 * The caller must hold vm_token
217 RB_GENERATE2(swblock_rb_tree
, swblock
, swb_entry
, rb_swblock_compare
,
218 vm_pindex_t
, swb_index
);
221 rb_swblock_compare(struct swblock
*swb1
, struct swblock
*swb2
)
223 if (swb1
->swb_index
< swb2
->swb_index
)
225 if (swb1
->swb_index
> swb2
->swb_index
)
232 rb_swblock_scancmp(struct swblock
*swb
, void *data
)
234 struct swfreeinfo
*info
= data
;
236 if (swb
->swb_index
< info
->basei
)
238 if (swb
->swb_index
> info
->endi
)
245 rb_swblock_condcmp(struct swblock
*swb
, void *data
)
247 struct swfreeinfo
*info
= data
;
249 if (swb
->swb_index
< info
->basei
)
255 * pagerops for OBJT_SWAP - "swap pager". Some ops are also global procedure
256 * calls hooked from other parts of the VM system and do not appear here.
257 * (see vm/swap_pager.h).
260 static void swap_pager_dealloc (vm_object_t object
);
261 static int swap_pager_getpage (vm_object_t
, vm_page_t
*, int);
262 static void swap_chain_iodone(struct bio
*biox
);
264 struct pagerops swappagerops
= {
265 swap_pager_dealloc
, /* deallocate an OBJT_SWAP object */
266 swap_pager_getpage
, /* pagein */
267 swap_pager_putpages
, /* pageout */
268 swap_pager_haspage
/* get backing store status for page */
272 * SWB_DMMAX is in page-sized chunks with the new swap system. It was
273 * dev-bsized chunks in the old. SWB_DMMAX is always a power of 2.
275 * swap_*() routines are externally accessible. swp_*() routines are
279 int nswap_lowat
= 128; /* in pages, swap_pager_almost_full warn */
280 int nswap_hiwat
= 512; /* in pages, swap_pager_almost_full warn */
282 static __inline
void swp_sizecheck (void);
283 static void swp_pager_async_iodone (struct bio
*bio
);
286 * Swap bitmap functions
289 static __inline
void swp_pager_freeswapspace(vm_object_t object
,
290 swblk_t blk
, int npages
);
291 static __inline swblk_t
swp_pager_getswapspace(vm_object_t object
, int npages
);
297 static void swp_pager_meta_convert(vm_object_t
);
298 static void swp_pager_meta_build(vm_object_t
, vm_pindex_t
, swblk_t
);
299 static void swp_pager_meta_free(vm_object_t
, vm_pindex_t
, vm_pindex_t
);
300 static void swp_pager_meta_free_all(vm_object_t
);
301 static swblk_t
swp_pager_meta_ctl(vm_object_t
, vm_pindex_t
, int);
304 * SWP_SIZECHECK() - update swap_pager_full indication
306 * update the swap_pager_almost_full indication and warn when we are
307 * about to run out of swap space, using lowat/hiwat hysteresis.
309 * Clear swap_pager_full ( task killing ) indication when lowat is met.
311 * No restrictions on call
312 * This routine may not block.
318 if (vm_swap_size
< nswap_lowat
) {
319 if (swap_pager_almost_full
== 0) {
320 kprintf("swap_pager: out of swap space\n");
321 swap_pager_almost_full
= 1;
322 swap_fail_ticks
= ticks
;
326 if (vm_swap_size
> nswap_hiwat
)
327 swap_pager_almost_full
= 0;
332 * Long-term data collection on 10-second interval. Return the value
333 * for KCOLLECT_SWAPPCT and set the values for SWAPANO and SWAPCCAC.
335 * Return total swap in the scale field. This can change if swap is
336 * regularly added or removed and may cause some historical confusion
337 * in that case, but SWAPPCT will always be historically accurate.
340 #define PTOB(value) ((uint64_t)(value) << PAGE_SHIFT)
343 collect_swap_callback(int n
)
345 uint64_t total
= vm_swap_max
;
346 uint64_t anon
= vm_swap_anon_use
;
347 uint64_t cache
= vm_swap_cache_use
;
349 if (total
== 0) /* avoid divide by zero */
351 kcollect_setvalue(KCOLLECT_SWAPANO
, PTOB(anon
));
352 kcollect_setvalue(KCOLLECT_SWAPCAC
, PTOB(cache
));
353 kcollect_setscale(KCOLLECT_SWAPANO
,
354 KCOLLECT_SCALE(KCOLLECT_SWAPANO_FORMAT
, PTOB(total
)));
355 kcollect_setscale(KCOLLECT_SWAPCAC
,
356 KCOLLECT_SCALE(KCOLLECT_SWAPCAC_FORMAT
, PTOB(total
)));
357 return (((anon
+ cache
) * 10000 + (total
>> 1)) / total
);
361 * SWAP_PAGER_INIT() - initialize the swap pager!
363 * Expected to be started from system init. NOTE: This code is run
364 * before much else so be careful what you depend on. Most of the VM
365 * system has yet to be initialized at this point.
367 * Called from the low level boot code only.
370 swap_pager_init(void *arg __unused
)
372 kcollect_register(KCOLLECT_SWAPPCT
, "swapuse", collect_swap_callback
,
373 KCOLLECT_SCALE(KCOLLECT_SWAPPCT_FORMAT
, 0));
374 kcollect_register(KCOLLECT_SWAPANO
, "swapano", NULL
,
375 KCOLLECT_SCALE(KCOLLECT_SWAPANO_FORMAT
, 0));
376 kcollect_register(KCOLLECT_SWAPCAC
, "swapcac", NULL
,
377 KCOLLECT_SCALE(KCOLLECT_SWAPCAC_FORMAT
, 0));
379 SYSINIT(vm_mem
, SI_BOOT1_VM
, SI_ORDER_THIRD
, swap_pager_init
, NULL
);
382 * SWAP_PAGER_SWAP_INIT() - swap pager initialization from pageout process
384 * Expected to be started from pageout process once, prior to entering
387 * Called from the low level boot code only.
390 swap_pager_swap_init(void)
395 * Number of in-transit swap bp operations. Don't
396 * exhaust the pbufs completely. Make sure we
397 * initialize workable values (0 will work for hysteresis
398 * but it isn't very efficient).
400 * The nsw_cluster_max is constrained by the number of pages an XIO
401 * holds, i.e., (MAXPHYS/PAGE_SIZE) and our locally defined
402 * MAX_PAGEOUT_CLUSTER. Also be aware that swap ops are
403 * constrained by the swap device interleave stripe size.
405 * Currently we hardwire nsw_wcount_async to 4. This limit is
406 * designed to prevent other I/O from having high latencies due to
407 * our pageout I/O. The value 4 works well for one or two active swap
408 * devices but is probably a little low if you have more. Even so,
409 * a higher value would probably generate only a limited improvement
410 * with three or four active swap devices since the system does not
411 * typically have to pageout at extreme bandwidths. We will want
412 * at least 2 per swap devices, and 4 is a pretty good value if you
413 * have one NFS swap device due to the command/ack latency over NFS.
414 * So it all works out pretty well.
417 nsw_cluster_max
= min((MAXPHYS
/PAGE_SIZE
), MAX_PAGEOUT_CLUSTER
);
419 nsw_rcount
= (nswbuf_kva
+ 1) / 2;
420 nsw_wcount_sync
= (nswbuf_kva
+ 3) / 4;
421 nsw_wcount_async
= 4;
422 nsw_wcount_async_max
= nsw_wcount_async
;
425 * The zone is dynamically allocated so generally size it to
426 * maxswzone (32MB to 256GB of KVM). Set a minimum size based
427 * on physical memory of around 8x (each swblock can hold 16 pages).
429 * With the advent of SSDs (vs HDs) the practical (swap:memory) ratio
430 * has increased dramatically.
432 n
= vmstats
.v_page_count
/ 2;
433 if (maxswzone
&& n
< maxswzone
/ sizeof(struct swblock
))
434 n
= maxswzone
/ sizeof(struct swblock
);
440 sizeof(struct swblock
),
443 if (swap_zone
!= NULL
)
446 * if the allocation failed, try a zone two thirds the
447 * size of the previous attempt.
452 if (swap_zone
== NULL
)
453 panic("swap_pager_swap_init: swap_zone == NULL");
455 kprintf("Swap zone entries reduced from %d to %d.\n", n2
, n
);
459 * SWAP_PAGER_ALLOC() - allocate a new OBJT_SWAP VM object and instantiate
460 * its metadata structures.
462 * This routine is called from the mmap and fork code to create a new
463 * OBJT_SWAP object. We do this by creating an OBJT_DEFAULT object
464 * and then converting it with swp_pager_meta_convert().
466 * We only support unnamed objects.
471 swap_pager_alloc(void *handle
, off_t size
, vm_prot_t prot
, off_t offset
)
475 KKASSERT(handle
== NULL
);
476 object
= vm_object_allocate_hold(OBJT_DEFAULT
,
477 OFF_TO_IDX(offset
+ PAGE_MASK
+ size
));
478 swp_pager_meta_convert(object
);
479 vm_object_drop(object
);
485 * SWAP_PAGER_DEALLOC() - remove swap metadata from object
487 * The swap backing for the object is destroyed. The code is
488 * designed such that we can reinstantiate it later, but this
489 * routine is typically called only when the entire object is
490 * about to be destroyed.
492 * The object must be locked or unreferenceable.
493 * No other requirements.
496 swap_pager_dealloc(vm_object_t object
)
498 vm_object_hold(object
);
499 vm_object_pip_wait(object
, "swpdea");
502 * Free all remaining metadata. We only bother to free it from
503 * the swap meta data. We do not attempt to free swapblk's still
504 * associated with vm_page_t's for this object. We do not care
505 * if paging is still in progress on some objects.
507 swp_pager_meta_free_all(object
);
508 vm_object_drop(object
);
511 /************************************************************************
512 * SWAP PAGER BITMAP ROUTINES *
513 ************************************************************************/
516 * SWP_PAGER_GETSWAPSPACE() - allocate raw swap space
518 * Allocate swap for the requested number of pages. The starting
519 * swap block number (a page index) is returned or SWAPBLK_NONE
520 * if the allocation failed.
522 * Also has the side effect of advising that somebody made a mistake
523 * when they configured swap and didn't configure enough.
525 * The caller must hold the object.
526 * This routine may not block.
528 static __inline swblk_t
529 swp_pager_getswapspace(vm_object_t object
, int npages
)
533 lwkt_gettoken(&vm_token
);
534 blk
= blist_allocat(swapblist
, npages
, swapiterator
);
535 if (blk
== SWAPBLK_NONE
)
536 blk
= blist_allocat(swapblist
, npages
, 0);
537 if (blk
== SWAPBLK_NONE
) {
538 if (swap_pager_full
!= 2) {
539 if (vm_swap_max
== 0)
540 kprintf("Warning: The system would like to "
541 "page to swap but no swap space "
544 kprintf("swap_pager_getswapspace: "
545 "swap full allocating %d pages\n",
548 if (swap_pager_almost_full
== 0)
549 swap_fail_ticks
= ticks
;
550 swap_pager_almost_full
= 1;
553 /* swapiterator = blk; disable for now, doesn't work well */
554 swapacctspace(blk
, -npages
);
555 if (object
->type
== OBJT_SWAP
)
556 vm_swap_anon_use
+= npages
;
558 vm_swap_cache_use
+= npages
;
561 lwkt_reltoken(&vm_token
);
566 * SWP_PAGER_FREESWAPSPACE() - free raw swap space
568 * This routine returns the specified swap blocks back to the bitmap.
570 * Note: This routine may not block (it could in the old swap code),
571 * and through the use of the new blist routines it does not block.
573 * This routine may not block.
577 swp_pager_freeswapspace(vm_object_t object
, swblk_t blk
, int npages
)
579 struct swdevt
*sp
= &swdevt
[BLK2DEVIDX(blk
)];
581 lwkt_gettoken(&vm_token
);
582 sp
->sw_nused
-= npages
;
583 if (object
->type
== OBJT_SWAP
)
584 vm_swap_anon_use
-= npages
;
586 vm_swap_cache_use
-= npages
;
588 if (sp
->sw_flags
& SW_CLOSING
) {
589 lwkt_reltoken(&vm_token
);
593 blist_free(swapblist
, blk
, npages
);
594 vm_swap_size
+= npages
;
596 lwkt_reltoken(&vm_token
);
600 * SWAP_PAGER_FREESPACE() - frees swap blocks associated with a page
601 * range within an object.
603 * This is a globally accessible routine.
605 * This routine removes swapblk assignments from swap metadata.
607 * The external callers of this routine typically have already destroyed
608 * or renamed vm_page_t's associated with this range in the object so
614 swap_pager_freespace(vm_object_t object
, vm_pindex_t start
, vm_pindex_t size
)
616 vm_object_hold(object
);
617 swp_pager_meta_free(object
, start
, size
);
618 vm_object_drop(object
);
625 swap_pager_freespace_all(vm_object_t object
)
627 vm_object_hold(object
);
628 swp_pager_meta_free_all(object
);
629 vm_object_drop(object
);
633 * This function conditionally frees swap cache swap starting at
634 * (*basei) in the object. (count) swap blocks will be nominally freed.
635 * The actual number of blocks freed can be more or less than the
638 * This function nominally returns the number of blocks freed. However,
639 * the actual number of blocks freed may be less then the returned value.
640 * If the function is unable to exhaust the object or if it is able to
641 * free (approximately) the requested number of blocks it returns
644 * If we exhaust the object we will return a value n <= count.
646 * The caller must hold the object.
648 * WARNING! If count == 0 then -1 can be returned as a degenerate case,
649 * callers should always pass a count value > 0.
651 static int swap_pager_condfree_callback(struct swblock
*swap
, void *data
);
654 swap_pager_condfree(vm_object_t object
, vm_pindex_t
*basei
, int count
)
656 struct swfreeinfo info
;
660 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
662 info
.object
= object
;
663 info
.basei
= *basei
; /* skip up to this page index */
664 info
.begi
= count
; /* max swap pages to destroy */
665 info
.endi
= count
* 8; /* max swblocks to scan */
667 swblock_rb_tree_RB_SCAN(&object
->swblock_root
, rb_swblock_condcmp
,
668 swap_pager_condfree_callback
, &info
);
672 * Take the higher difference swblocks vs pages
674 n
= count
- (int)info
.begi
;
675 t
= count
* 8 - (int)info
.endi
;
684 * The idea is to free whole meta-block to avoid fragmenting
685 * the swap space or disk I/O. We only do this if NO VM pages
688 * We do not have to deal with clearing PG_SWAPPED in related VM
689 * pages because there are no related VM pages.
691 * The caller must hold the object.
694 swap_pager_condfree_callback(struct swblock
*swap
, void *data
)
696 struct swfreeinfo
*info
= data
;
697 vm_object_t object
= info
->object
;
700 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
701 if (vm_page_lookup(object
, swap
->swb_index
+ i
))
704 info
->basei
= swap
->swb_index
+ SWAP_META_PAGES
;
705 if (i
== SWAP_META_PAGES
) {
706 info
->begi
-= swap
->swb_count
;
707 swap_pager_freespace(object
, swap
->swb_index
, SWAP_META_PAGES
);
710 if ((int)info
->begi
< 0 || (int)info
->endi
< 0)
717 * Called by vm_page_alloc() when a new VM page is inserted
718 * into a VM object. Checks whether swap has been assigned to
719 * the page and sets PG_SWAPPED as necessary.
721 * (m) must be busied by caller and remains busied on return.
724 swap_pager_page_inserted(vm_page_t m
)
726 if (m
->object
->swblock_count
) {
727 vm_object_hold(m
->object
);
728 if (swp_pager_meta_ctl(m
->object
, m
->pindex
, 0) != SWAPBLK_NONE
)
729 vm_page_flag_set(m
, PG_SWAPPED
);
730 vm_object_drop(m
->object
);
735 * SWAP_PAGER_RESERVE() - reserve swap blocks in object
737 * Assigns swap blocks to the specified range within the object. The
738 * swap blocks are not zerod. Any previous swap assignment is destroyed.
740 * Returns 0 on success, -1 on failure.
742 * The caller is responsible for avoiding races in the specified range.
743 * No other requirements.
746 swap_pager_reserve(vm_object_t object
, vm_pindex_t start
, vm_size_t size
)
749 swblk_t blk
= SWAPBLK_NONE
;
750 vm_pindex_t beg
= start
; /* save start index */
752 vm_object_hold(object
);
757 while ((blk
= swp_pager_getswapspace(object
, n
)) ==
762 swp_pager_meta_free(object
, beg
,
764 vm_object_drop(object
);
769 swp_pager_meta_build(object
, start
, blk
);
775 swp_pager_meta_free(object
, start
, n
);
776 vm_object_drop(object
);
781 * SWAP_PAGER_COPY() - copy blocks from source pager to destination pager
782 * and destroy the source.
784 * Copy any valid swapblks from the source to the destination. In
785 * cases where both the source and destination have a valid swapblk,
786 * we keep the destination's.
788 * This routine is allowed to block. It may block allocating metadata
789 * indirectly through swp_pager_meta_build() or if paging is still in
790 * progress on the source.
792 * XXX vm_page_collapse() kinda expects us not to block because we
793 * supposedly do not need to allocate memory, but for the moment we
794 * *may* have to get a little memory from the zone allocator, but
795 * it is taken from the interrupt memory. We should be ok.
797 * The source object contains no vm_page_t's (which is just as well)
798 * The source object is of type OBJT_SWAP.
800 * The source and destination objects must be held by the caller.
803 swap_pager_copy(vm_object_t srcobject
, vm_object_t dstobject
,
804 vm_pindex_t base_index
, int destroysource
)
808 ASSERT_LWKT_TOKEN_HELD(vm_object_token(srcobject
));
809 ASSERT_LWKT_TOKEN_HELD(vm_object_token(dstobject
));
812 * transfer source to destination.
814 for (i
= 0; i
< dstobject
->size
; ++i
) {
818 * Locate (without changing) the swapblk on the destination,
819 * unless it is invalid in which case free it silently, or
820 * if the destination is a resident page, in which case the
821 * source is thrown away.
823 dstaddr
= swp_pager_meta_ctl(dstobject
, i
, 0);
825 if (dstaddr
== SWAPBLK_NONE
) {
827 * Destination has no swapblk and is not resident,
832 srcaddr
= swp_pager_meta_ctl(srcobject
,
833 base_index
+ i
, SWM_POP
);
835 if (srcaddr
!= SWAPBLK_NONE
)
836 swp_pager_meta_build(dstobject
, i
, srcaddr
);
839 * Destination has valid swapblk or it is represented
840 * by a resident page. We destroy the sourceblock.
842 swp_pager_meta_ctl(srcobject
, base_index
+ i
, SWM_FREE
);
847 * Free left over swap blocks in source.
849 * We have to revert the type to OBJT_DEFAULT so we do not accidently
850 * double-remove the object from the swap queues.
854 * Reverting the type is not necessary, the caller is going
855 * to destroy srcobject directly, but I'm doing it here
856 * for consistency since we've removed the object from its
859 swp_pager_meta_free_all(srcobject
);
860 if (srcobject
->type
== OBJT_SWAP
)
861 srcobject
->type
= OBJT_DEFAULT
;
866 * SWAP_PAGER_HASPAGE() - determine if we have good backing store for
867 * the requested page.
869 * We determine whether good backing store exists for the requested
870 * page and return TRUE if it does, FALSE if it doesn't.
872 * If TRUE, we also try to determine how much valid, contiguous backing
873 * store exists before and after the requested page within a reasonable
874 * distance. We do not try to restrict it to the swap device stripe
875 * (that is handled in getpages/putpages). It probably isn't worth
881 swap_pager_haspage(vm_object_t object
, vm_pindex_t pindex
)
886 * do we have good backing store at the requested index ?
888 vm_object_hold(object
);
889 blk0
= swp_pager_meta_ctl(object
, pindex
, 0);
891 if (blk0
== SWAPBLK_NONE
) {
892 vm_object_drop(object
);
895 vm_object_drop(object
);
900 * SWAP_PAGER_PAGE_UNSWAPPED() - remove swap backing store related to page
902 * This removes any associated swap backing store, whether valid or
903 * not, from the page. This operates on any VM object, not just OBJT_SWAP
906 * This routine is typically called when a page is made dirty, at
907 * which point any associated swap can be freed. MADV_FREE also
908 * calls us in a special-case situation
910 * NOTE!!! If the page is clean and the swap was valid, the caller
911 * should make the page dirty before calling this routine.
912 * This routine does NOT change the m->dirty status of the page.
913 * Also: MADV_FREE depends on it.
915 * The page must be busied.
916 * The caller can hold the object to avoid blocking, else we might block.
917 * No other requirements.
920 swap_pager_unswapped(vm_page_t m
)
922 if (m
->flags
& PG_SWAPPED
) {
923 vm_object_hold(m
->object
);
924 KKASSERT(m
->flags
& PG_SWAPPED
);
925 swp_pager_meta_ctl(m
->object
, m
->pindex
, SWM_FREE
);
926 vm_page_flag_clear(m
, PG_SWAPPED
);
927 vm_object_drop(m
->object
);
932 * SWAP_PAGER_STRATEGY() - read, write, free blocks
934 * This implements a VM OBJECT strategy function using swap backing store.
935 * This can operate on any VM OBJECT type, not necessarily just OBJT_SWAP
938 * This is intended to be a cacheless interface (i.e. caching occurs at
939 * higher levels), and is also used as a swap-based SSD cache for vnode
940 * and device objects.
942 * All I/O goes directly to and from the swap device.
944 * We currently attempt to run I/O synchronously or asynchronously as
945 * the caller requests. This isn't perfect because we loose error
946 * sequencing when we run multiple ops in parallel to satisfy a request.
947 * But this is swap, so we let it all hang out.
949 * NOTE: This function supports the KVABIO API wherein bp->b_data might
950 * not be synchronized to the current cpu.
955 swap_pager_strategy(vm_object_t object
, struct bio
*bio
)
957 struct buf
*bp
= bio
->bio_buf
;
960 vm_pindex_t biox_blkno
= 0;
966 struct bio_track
*track
;
971 * tracking for swapdev vnode I/Os
973 if (bp
->b_cmd
== BUF_CMD_READ
)
974 track
= &swapdev_vp
->v_track_read
;
976 track
= &swapdev_vp
->v_track_write
;
979 if (bp
->b_bcount
& PAGE_MASK
) {
980 bp
->b_error
= EINVAL
;
981 bp
->b_flags
|= B_ERROR
| B_INVAL
;
983 kprintf("swap_pager_strategy: bp %p offset %lld size %d, "
984 "not page bounded\n",
985 bp
, (long long)bio
->bio_offset
, (int)bp
->b_bcount
);
990 * Clear error indication, initialize page index, count, data pointer.
993 bp
->b_flags
&= ~B_ERROR
;
994 bp
->b_resid
= bp
->b_bcount
;
996 start
= (vm_pindex_t
)(bio
->bio_offset
>> PAGE_SHIFT
);
997 count
= howmany(bp
->b_bcount
, PAGE_SIZE
);
1000 * WARNING! Do not dereference *data without issuing a bkvasync()
1005 * Deal with BUF_CMD_FREEBLKS
1007 if (bp
->b_cmd
== BUF_CMD_FREEBLKS
) {
1009 * FREE PAGE(s) - destroy underlying swap that is no longer
1012 vm_object_hold(object
);
1013 swp_pager_meta_free(object
, start
, count
);
1014 vm_object_drop(object
);
1021 * We need to be able to create a new cluster of I/O's. We cannot
1022 * use the caller fields of the passed bio so push a new one.
1024 * Because nbio is just a placeholder for the cluster links,
1025 * we can biodone() the original bio instead of nbio to make
1026 * things a bit more efficient.
1028 nbio
= push_bio(bio
);
1029 nbio
->bio_offset
= bio
->bio_offset
;
1030 nbio
->bio_caller_info1
.cluster_head
= NULL
;
1031 nbio
->bio_caller_info2
.cluster_tail
= NULL
;
1037 * Execute read or write
1039 vm_object_hold(object
);
1045 * Obtain block. If block not found and writing, allocate a
1046 * new block and build it into the object.
1048 blk
= swp_pager_meta_ctl(object
, start
, 0);
1049 if ((blk
== SWAPBLK_NONE
) && bp
->b_cmd
!= BUF_CMD_READ
) {
1050 blk
= swp_pager_getswapspace(object
, 1);
1051 if (blk
== SWAPBLK_NONE
) {
1052 bp
->b_error
= ENOMEM
;
1053 bp
->b_flags
|= B_ERROR
;
1056 swp_pager_meta_build(object
, start
, blk
);
1060 * Do we have to flush our current collection? Yes if:
1062 * - no swap block at this index
1063 * - swap block is not contiguous
1064 * - we cross a physical disk boundry in the
1068 biox
&& (biox_blkno
+ btoc(bufx
->b_bcount
) != blk
||
1069 ((biox_blkno
^ blk
) & ~SWB_DMMASK
)
1072 if (bp
->b_cmd
== BUF_CMD_READ
) {
1073 ++mycpu
->gd_cnt
.v_swapin
;
1074 mycpu
->gd_cnt
.v_swappgsin
+= btoc(bufx
->b_bcount
);
1076 ++mycpu
->gd_cnt
.v_swapout
;
1077 mycpu
->gd_cnt
.v_swappgsout
+= btoc(bufx
->b_bcount
);
1078 bufx
->b_dirtyend
= bufx
->b_bcount
;
1082 * Finished with this buf.
1084 KKASSERT(bufx
->b_bcount
!= 0);
1085 if (bufx
->b_cmd
!= BUF_CMD_READ
)
1086 bufx
->b_dirtyend
= bufx
->b_bcount
;
1092 * Add new swapblk to biox, instantiating biox if necessary.
1093 * Zero-fill reads are able to take a shortcut.
1095 if (blk
== SWAPBLK_NONE
) {
1097 * We can only get here if we are reading.
1100 bzero(data
, PAGE_SIZE
);
1101 bp
->b_resid
-= PAGE_SIZE
;
1104 /* XXX chain count > 4, wait to <= 4 */
1106 bufx
= getpbuf(NULL
);
1107 bufx
->b_flags
|= B_KVABIO
;
1108 biox
= &bufx
->b_bio1
;
1109 cluster_append(nbio
, bufx
);
1110 bufx
->b_cmd
= bp
->b_cmd
;
1111 biox
->bio_done
= swap_chain_iodone
;
1112 biox
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1113 biox
->bio_caller_info1
.cluster_parent
= nbio
;
1116 bufx
->b_data
= data
;
1118 bufx
->b_bcount
+= PAGE_SIZE
;
1125 vm_object_drop(object
);
1128 * Flush out last buffer
1131 if (bufx
->b_cmd
== BUF_CMD_READ
) {
1132 ++mycpu
->gd_cnt
.v_swapin
;
1133 mycpu
->gd_cnt
.v_swappgsin
+= btoc(bufx
->b_bcount
);
1135 ++mycpu
->gd_cnt
.v_swapout
;
1136 mycpu
->gd_cnt
.v_swappgsout
+= btoc(bufx
->b_bcount
);
1137 bufx
->b_dirtyend
= bufx
->b_bcount
;
1139 KKASSERT(bufx
->b_bcount
);
1140 if (bufx
->b_cmd
!= BUF_CMD_READ
)
1141 bufx
->b_dirtyend
= bufx
->b_bcount
;
1142 /* biox, bufx = NULL */
1146 * Now initiate all the I/O. Be careful looping on our chain as
1147 * I/O's may complete while we are still initiating them.
1149 * If the request is a 100% sparse read no bios will be present
1150 * and we just biodone() the buffer.
1152 nbio
->bio_caller_info2
.cluster_tail
= NULL
;
1153 bufx
= nbio
->bio_caller_info1
.cluster_head
;
1157 biox
= &bufx
->b_bio1
;
1159 bufx
= bufx
->b_cluster_next
;
1160 vn_strategy(swapdev_vp
, biox
);
1167 * Completion of the cluster will also call biodone_chain(nbio).
1168 * We never call biodone(nbio) so we don't have to worry about
1169 * setting up a bio_done callback. It's handled in the sub-IO.
1180 swap_chain_iodone(struct bio
*biox
)
1183 struct buf
*bufx
; /* chained sub-buffer */
1184 struct bio
*nbio
; /* parent nbio with chain glue */
1185 struct buf
*bp
; /* original bp associated with nbio */
1188 bufx
= biox
->bio_buf
;
1189 nbio
= biox
->bio_caller_info1
.cluster_parent
;
1193 * Update the original buffer
1195 KKASSERT(bp
!= NULL
);
1196 if (bufx
->b_flags
& B_ERROR
) {
1197 atomic_set_int(&bufx
->b_flags
, B_ERROR
);
1198 bp
->b_error
= bufx
->b_error
; /* race ok */
1199 } else if (bufx
->b_resid
!= 0) {
1200 atomic_set_int(&bufx
->b_flags
, B_ERROR
);
1201 bp
->b_error
= EINVAL
; /* race ok */
1203 atomic_subtract_int(&bp
->b_resid
, bufx
->b_bcount
);
1207 * Remove us from the chain.
1209 spin_lock(&swapbp_spin
);
1210 nextp
= &nbio
->bio_caller_info1
.cluster_head
;
1211 while (*nextp
!= bufx
) {
1212 KKASSERT(*nextp
!= NULL
);
1213 nextp
= &(*nextp
)->b_cluster_next
;
1215 *nextp
= bufx
->b_cluster_next
;
1216 chain_empty
= (nbio
->bio_caller_info1
.cluster_head
== NULL
);
1217 spin_unlock(&swapbp_spin
);
1220 * Clean up bufx. If the chain is now empty we finish out
1221 * the parent. Note that we may be racing other completions
1222 * so we must use the chain_empty status from above.
1225 if (bp
->b_resid
!= 0 && !(bp
->b_flags
& B_ERROR
)) {
1226 atomic_set_int(&bp
->b_flags
, B_ERROR
);
1227 bp
->b_error
= EINVAL
;
1229 biodone_chain(nbio
);
1231 relpbuf(bufx
, NULL
);
1235 * SWAP_PAGER_GETPAGES() - bring page in from swap
1237 * The requested page may have to be brought in from swap. Calculate the
1238 * swap block and bring in additional pages if possible. All pages must
1239 * have contiguous swap block assignments and reside in the same object.
1241 * The caller has a single vm_object_pip_add() reference prior to
1242 * calling us and we should return with the same.
1244 * The caller has BUSY'd the page. We should return with (*mpp) left busy,
1245 * and any additinal pages unbusied.
1247 * If the caller encounters a PG_RAM page it will pass it to us even though
1248 * it may be valid and dirty. We cannot overwrite the page in this case!
1249 * The case is used to allow us to issue pure read-aheads.
1251 * NOTE! XXX This code does not entirely pipeline yet due to the fact that
1252 * the PG_RAM page is validated at the same time as mreq. What we
1253 * really need to do is issue a separate read-ahead pbuf.
1258 swap_pager_getpage(vm_object_t object
, vm_page_t
*mpp
, int seqaccess
)
1271 vm_page_t marray
[XIO_INTERNAL_PAGES
];
1275 vm_object_hold(object
);
1276 if (mreq
->object
!= object
) {
1277 panic("swap_pager_getpages: object mismatch %p/%p",
1284 * We don't want to overwrite a fully valid page as it might be
1285 * dirty. This case can occur when e.g. vm_fault hits a perfectly
1286 * valid page with PG_RAM set.
1288 * In this case we see if the next page is a suitable page-in
1289 * candidate and if it is we issue read-ahead. PG_RAM will be
1290 * set on the last page of the read-ahead to continue the pipeline.
1292 if (mreq
->valid
== VM_PAGE_BITS_ALL
) {
1293 if (swap_burst_read
== 0 || mreq
->pindex
+ 1 >= object
->size
) {
1294 vm_object_drop(object
);
1295 return(VM_PAGER_OK
);
1297 blk
= swp_pager_meta_ctl(object
, mreq
->pindex
+ 1, 0);
1298 if (blk
== SWAPBLK_NONE
) {
1299 vm_object_drop(object
);
1300 return(VM_PAGER_OK
);
1302 m
= vm_page_lookup_busy_try(object
, mreq
->pindex
+ 1,
1305 vm_object_drop(object
);
1306 return(VM_PAGER_OK
);
1307 } else if (m
== NULL
) {
1309 * Use VM_ALLOC_QUICK to avoid blocking on cache
1312 m
= vm_page_alloc(object
, mreq
->pindex
+ 1,
1315 vm_object_drop(object
);
1316 return(VM_PAGER_OK
);
1321 vm_object_drop(object
);
1322 return(VM_PAGER_OK
);
1324 vm_page_unqueue_nowakeup(m
);
1334 * Try to block-read contiguous pages from swap if sequential,
1335 * otherwise just read one page. Contiguous pages from swap must
1336 * reside within a single device stripe because the I/O cannot be
1337 * broken up across multiple stripes.
1339 * Note that blk and iblk can be SWAPBLK_NONE but the loop is
1340 * set up such that the case(s) are handled implicitly.
1342 blk
= swp_pager_meta_ctl(mreq
->object
, mreq
->pindex
, 0);
1345 for (i
= 1; i
<= swap_burst_read
&&
1346 i
< XIO_INTERNAL_PAGES
&&
1347 mreq
->pindex
+ i
< object
->size
; ++i
) {
1350 iblk
= swp_pager_meta_ctl(object
, mreq
->pindex
+ i
, 0);
1351 if (iblk
!= blk
+ i
)
1353 if ((blk
^ iblk
) & ~SWB_DMMASK
)
1355 m
= vm_page_lookup_busy_try(object
, mreq
->pindex
+ i
,
1359 } else if (m
== NULL
) {
1361 * Use VM_ALLOC_QUICK to avoid blocking on cache
1364 m
= vm_page_alloc(object
, mreq
->pindex
+ i
,
1373 vm_page_unqueue_nowakeup(m
);
1379 vm_page_flag_set(marray
[i
- 1], PG_RAM
);
1382 * If mreq is the requested page and we have nothing to do return
1383 * VM_PAGER_FAIL. If raonly is set mreq is just another read-ahead
1384 * page and must be cleaned up.
1386 if (blk
== SWAPBLK_NONE
) {
1389 vnode_pager_freepage(mreq
);
1390 vm_object_drop(object
);
1391 return(VM_PAGER_OK
);
1393 vm_object_drop(object
);
1394 return(VM_PAGER_FAIL
);
1399 * Map our page(s) into kva for input
1401 * Use the KVABIO API to avoid synchronizing the pmap.
1403 bp
= getpbuf_kva(&nsw_rcount
);
1405 kva
= (vm_offset_t
) bp
->b_kvabase
;
1406 bcopy(marray
, bp
->b_xio
.xio_pages
, i
* sizeof(vm_page_t
));
1407 pmap_qenter_noinval(kva
, bp
->b_xio
.xio_pages
, i
);
1409 bp
->b_data
= (caddr_t
)kva
;
1410 bp
->b_bcount
= PAGE_SIZE
* i
;
1411 bp
->b_xio
.xio_npages
= i
;
1412 bp
->b_flags
|= B_KVABIO
;
1413 bio
->bio_done
= swp_pager_async_iodone
;
1414 bio
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1415 bio
->bio_caller_info1
.index
= SWBIO_READ
;
1418 * Set index. If raonly set the index beyond the array so all
1419 * the pages are treated the same, otherwise the original mreq is
1423 bio
->bio_driver_info
= (void *)(intptr_t)i
;
1425 bio
->bio_driver_info
= (void *)(intptr_t)0;
1427 for (j
= 0; j
< i
; ++j
)
1428 vm_page_flag_set(bp
->b_xio
.xio_pages
[j
], PG_SWAPINPROG
);
1430 mycpu
->gd_cnt
.v_swapin
++;
1431 mycpu
->gd_cnt
.v_swappgsin
+= bp
->b_xio
.xio_npages
;
1434 * We still hold the lock on mreq, and our automatic completion routine
1435 * does not remove it.
1437 vm_object_pip_add(object
, bp
->b_xio
.xio_npages
);
1440 * perform the I/O. NOTE!!! bp cannot be considered valid after
1441 * this point because we automatically release it on completion.
1442 * Instead, we look at the one page we are interested in which we
1443 * still hold a lock on even through the I/O completion.
1445 * The other pages in our m[] array are also released on completion,
1446 * so we cannot assume they are valid anymore either.
1448 bp
->b_cmd
= BUF_CMD_READ
;
1450 vn_strategy(swapdev_vp
, bio
);
1453 * Wait for the page we want to complete. PG_SWAPINPROG is always
1454 * cleared on completion. If an I/O error occurs, SWAPBLK_NONE
1455 * is set in the meta-data.
1457 * If this is a read-ahead only we return immediately without
1461 vm_object_drop(object
);
1462 return(VM_PAGER_OK
);
1466 * Read-ahead includes originally requested page case.
1469 flags
= mreq
->flags
;
1471 if ((flags
& PG_SWAPINPROG
) == 0)
1473 tsleep_interlock(mreq
, 0);
1474 if (!atomic_cmpset_int(&mreq
->flags
, flags
,
1475 flags
| PG_WANTED
| PG_REFERENCED
)) {
1478 mycpu
->gd_cnt
.v_intrans
++;
1479 if (tsleep(mreq
, PINTERLOCKED
, "swread", hz
*20)) {
1481 "swap_pager: indefinite wait buffer: "
1482 " bp %p offset: %lld, size: %ld\n",
1484 (long long)bio
->bio_offset
,
1491 * Disallow speculative reads prior to the PG_SWAPINPROG test.
1496 * mreq is left busied after completion, but all the other pages
1497 * are freed. If we had an unrecoverable read error the page will
1500 vm_object_drop(object
);
1501 if (mreq
->valid
!= VM_PAGE_BITS_ALL
)
1502 return(VM_PAGER_ERROR
);
1504 return(VM_PAGER_OK
);
1507 * A final note: in a low swap situation, we cannot deallocate swap
1508 * and mark a page dirty here because the caller is likely to mark
1509 * the page clean when we return, causing the page to possibly revert
1510 * to all-zero's later.
1515 * swap_pager_putpages:
1517 * Assign swap (if necessary) and initiate I/O on the specified pages.
1519 * We support both OBJT_DEFAULT and OBJT_SWAP objects. DEFAULT objects
1520 * are automatically converted to SWAP objects.
1522 * In a low memory situation we may block in vn_strategy(), but the new
1523 * vm_page reservation system coupled with properly written VFS devices
1524 * should ensure that no low-memory deadlock occurs. This is an area
1527 * The parent has N vm_object_pip_add() references prior to
1528 * calling us and will remove references for rtvals[] that are
1529 * not set to VM_PAGER_PEND. We need to remove the rest on I/O
1532 * The parent has soft-busy'd the pages it passes us and will unbusy
1533 * those whos rtvals[] entry is not set to VM_PAGER_PEND on return.
1534 * We need to unbusy the rest on I/O completion.
1539 swap_pager_putpages(vm_object_t object
, vm_page_t
*m
, int count
,
1540 int flags
, int *rtvals
)
1545 vm_object_hold(object
);
1547 if (count
&& m
[0]->object
!= object
) {
1548 panic("swap_pager_getpages: object mismatch %p/%p",
1557 * Turn object into OBJT_SWAP
1558 * Check for bogus sysops
1560 * Force sync if not pageout process, we don't want any single
1561 * non-pageout process to be able to hog the I/O subsystem! This
1562 * can be overridden by setting.
1564 if (object
->type
== OBJT_DEFAULT
) {
1565 if (object
->type
== OBJT_DEFAULT
)
1566 swp_pager_meta_convert(object
);
1570 * Normally we force synchronous swap I/O if this is not the
1571 * pageout daemon to prevent any single user process limited
1572 * via RLIMIT_RSS from hogging swap write bandwidth.
1574 if (curthread
!= pagethread
&&
1575 curthread
!= emergpager
&&
1576 swap_user_async
== 0) {
1577 flags
|= VM_PAGER_PUT_SYNC
;
1583 * Update nsw parameters from swap_async_max sysctl values.
1584 * Do not let the sysop crash the machine with bogus numbers.
1586 if (swap_async_max
!= nsw_wcount_async_max
) {
1592 if ((n
= swap_async_max
) > nswbuf_kva
/ 2)
1599 * Adjust difference ( if possible ). If the current async
1600 * count is too low, we may not be able to make the adjustment
1603 * vm_token needed for nsw_wcount sleep interlock
1605 lwkt_gettoken(&vm_token
);
1606 n
-= nsw_wcount_async_max
;
1607 if (nsw_wcount_async
+ n
>= 0) {
1608 nsw_wcount_async_max
+= n
;
1609 pbuf_adjcount(&nsw_wcount_async
, n
);
1611 lwkt_reltoken(&vm_token
);
1617 * Assign swap blocks and issue I/O. We reallocate swap on the fly.
1618 * The page is left dirty until the pageout operation completes
1622 for (i
= 0; i
< count
; i
+= n
) {
1629 * Maximum I/O size is limited by a number of factors.
1632 n
= min(BLIST_MAX_ALLOC
, count
- i
);
1633 n
= min(n
, nsw_cluster_max
);
1635 lwkt_gettoken(&vm_token
);
1638 * Get biggest block of swap we can. If we fail, fall
1639 * back and try to allocate a smaller block. Don't go
1640 * overboard trying to allocate space if it would overly
1644 (blk
= swp_pager_getswapspace(object
, n
)) == SWAPBLK_NONE
&&
1649 if (blk
== SWAPBLK_NONE
) {
1650 for (j
= 0; j
< n
; ++j
)
1651 rtvals
[i
+j
] = VM_PAGER_FAIL
;
1652 lwkt_reltoken(&vm_token
);
1655 if (vm_report_swap_allocs
> 0) {
1656 kprintf("swap_alloc %08jx,%d\n", (intmax_t)blk
, n
);
1657 --vm_report_swap_allocs
;
1661 * The I/O we are constructing cannot cross a physical
1662 * disk boundry in the swap stripe.
1664 if ((blk
^ (blk
+ n
)) & ~SWB_DMMASK
) {
1665 j
= ((blk
+ SWB_DMMAX
) & ~SWB_DMMASK
) - blk
;
1666 swp_pager_freeswapspace(object
, blk
+ j
, n
- j
);
1671 * All I/O parameters have been satisfied, build the I/O
1672 * request and assign the swap space.
1674 * Use the KVABIO API to avoid synchronizing the pmap.
1676 if ((flags
& VM_PAGER_PUT_SYNC
))
1677 bp
= getpbuf_kva(&nsw_wcount_sync
);
1679 bp
= getpbuf_kva(&nsw_wcount_async
);
1682 lwkt_reltoken(&vm_token
);
1684 pmap_qenter_noinval((vm_offset_t
)bp
->b_data
, &m
[i
], n
);
1686 bp
->b_flags
|= B_KVABIO
;
1687 bp
->b_bcount
= PAGE_SIZE
* n
;
1688 bio
->bio_offset
= (off_t
)blk
<< PAGE_SHIFT
;
1690 for (j
= 0; j
< n
; ++j
) {
1691 vm_page_t mreq
= m
[i
+j
];
1693 swp_pager_meta_build(mreq
->object
, mreq
->pindex
,
1695 if (object
->type
== OBJT_SWAP
)
1696 vm_page_dirty(mreq
);
1697 rtvals
[i
+j
] = VM_PAGER_OK
;
1699 vm_page_flag_set(mreq
, PG_SWAPINPROG
);
1700 bp
->b_xio
.xio_pages
[j
] = mreq
;
1702 bp
->b_xio
.xio_npages
= n
;
1704 mycpu
->gd_cnt
.v_swapout
++;
1705 mycpu
->gd_cnt
.v_swappgsout
+= bp
->b_xio
.xio_npages
;
1707 bp
->b_dirtyoff
= 0; /* req'd for NFS */
1708 bp
->b_dirtyend
= bp
->b_bcount
; /* req'd for NFS */
1709 bp
->b_cmd
= BUF_CMD_WRITE
;
1710 bio
->bio_caller_info1
.index
= SWBIO_WRITE
;
1715 if ((flags
& VM_PAGER_PUT_SYNC
) == 0) {
1716 bio
->bio_done
= swp_pager_async_iodone
;
1718 vn_strategy(swapdev_vp
, bio
);
1720 for (j
= 0; j
< n
; ++j
)
1721 rtvals
[i
+j
] = VM_PAGER_PEND
;
1726 * Issue synchrnously.
1728 * Wait for the sync I/O to complete, then update rtvals.
1729 * We just set the rtvals[] to VM_PAGER_PEND so we can call
1730 * our async completion routine at the end, thus avoiding a
1733 bio
->bio_caller_info1
.index
|= SWBIO_SYNC
;
1734 if (flags
& VM_PAGER_TRY_TO_CACHE
)
1735 bio
->bio_caller_info1
.index
|= SWBIO_TTC
;
1736 bio
->bio_done
= biodone_sync
;
1737 bio
->bio_flags
|= BIO_SYNC
;
1738 vn_strategy(swapdev_vp
, bio
);
1739 biowait(bio
, "swwrt");
1741 for (j
= 0; j
< n
; ++j
)
1742 rtvals
[i
+j
] = VM_PAGER_PEND
;
1745 * Now that we are through with the bp, we can call the
1746 * normal async completion, which frees everything up.
1748 swp_pager_async_iodone(bio
);
1750 vm_object_drop(object
);
1756 * Recalculate the low and high-water marks.
1759 swap_pager_newswap(void)
1762 * NOTE: vm_swap_max cannot exceed 1 billion blocks, which is the
1763 * limitation imposed by the blist code. Remember that this
1764 * will be divided by NSWAP_MAX (4), so each swap device is
1765 * limited to around a terrabyte.
1768 nswap_lowat
= (int64_t)vm_swap_max
* 4 / 100; /* 4% left */
1769 nswap_hiwat
= (int64_t)vm_swap_max
* 6 / 100; /* 6% left */
1770 kprintf("swap low/high-water marks set to %d/%d\n",
1771 nswap_lowat
, nswap_hiwat
);
1780 * swp_pager_async_iodone:
1782 * Completion routine for asynchronous reads and writes from/to swap.
1783 * Also called manually by synchronous code to finish up a bp.
1785 * For READ operations, the pages are PG_BUSY'd. For WRITE operations,
1786 * the pages are vm_page_t->busy'd. For READ operations, we PG_BUSY
1787 * unbusy all pages except the 'main' request page. For WRITE
1788 * operations, we vm_page_t->busy'd unbusy all pages ( we can do this
1789 * because we marked them all VM_PAGER_PEND on return from putpages ).
1791 * This routine may not block.
1796 swp_pager_async_iodone(struct bio
*bio
)
1798 struct buf
*bp
= bio
->bio_buf
;
1799 vm_object_t object
= NULL
;
1806 if (bp
->b_flags
& B_ERROR
) {
1808 "swap_pager: I/O error - %s failed; offset %lld,"
1809 "size %ld, error %d\n",
1810 ((bio
->bio_caller_info1
.index
& SWBIO_READ
) ?
1811 "pagein" : "pageout"),
1812 (long long)bio
->bio_offset
,
1821 if (bp
->b_xio
.xio_npages
)
1822 object
= bp
->b_xio
.xio_pages
[0]->object
;
1825 /* PMAP TESTING CODE (useful, keep it in but #if 0'd) */
1826 if (bio
->bio_caller_info1
.index
& SWBIO_WRITE
) {
1827 if (bio
->bio_crc
!= iscsi_crc32(bp
->b_data
, bp
->b_bcount
)) {
1828 kprintf("SWAPOUT: BADCRC %08x %08x\n",
1830 iscsi_crc32(bp
->b_data
, bp
->b_bcount
));
1831 for (i
= 0; i
< bp
->b_xio
.xio_npages
; ++i
) {
1832 vm_page_t m
= bp
->b_xio
.xio_pages
[i
];
1833 if (m
->flags
& PG_WRITEABLE
)
1835 "%d/%d %p writable\n",
1836 i
, bp
->b_xio
.xio_npages
, m
);
1843 * remove the mapping for kernel virtual
1845 pmap_qremove((vm_offset_t
)bp
->b_data
, bp
->b_xio
.xio_npages
);
1848 * cleanup pages. If an error occurs writing to swap, we are in
1849 * very serious trouble. If it happens to be a disk error, though,
1850 * we may be able to recover by reassigning the swap later on. So
1851 * in this case we remove the m->swapblk assignment for the page
1852 * but do not free it in the rlist. The errornous block(s) are thus
1853 * never reallocated as swap. Redirty the page and continue.
1855 for (i
= 0; i
< bp
->b_xio
.xio_npages
; ++i
) {
1856 vm_page_t m
= bp
->b_xio
.xio_pages
[i
];
1858 if (bp
->b_flags
& B_ERROR
) {
1860 * If an error occurs I'd love to throw the swapblk
1861 * away without freeing it back to swapspace, so it
1862 * can never be used again. But I can't from an
1866 if (bio
->bio_caller_info1
.index
& SWBIO_READ
) {
1868 * When reading, reqpage needs to stay
1869 * locked for the parent, but all other
1870 * pages can be freed. We still want to
1871 * wakeup the parent waiting on the page,
1872 * though. ( also: pg_reqpage can be -1 and
1873 * not match anything ).
1875 * We have to wake specifically requested pages
1876 * up too because we cleared PG_SWAPINPROG and
1877 * someone may be waiting for that.
1879 * NOTE: For reads, m->dirty will probably
1880 * be overridden by the original caller
1881 * of getpages so don't play cute tricks
1884 * NOTE: We can't actually free the page from
1885 * here, because this is an interrupt.
1886 * It is not legal to mess with
1887 * object->memq from an interrupt.
1888 * Deactivate the page instead.
1890 * WARNING! The instant PG_SWAPINPROG is
1891 * cleared another cpu may start
1892 * using the mreq page (it will
1893 * check m->valid immediately).
1897 vm_page_flag_clear(m
, PG_SWAPINPROG
);
1900 * bio_driver_info holds the requested page
1903 if (i
!= (int)(intptr_t)bio
->bio_driver_info
) {
1904 vm_page_deactivate(m
);
1910 * If i == bp->b_pager.pg_reqpage, do not wake
1911 * the page up. The caller needs to.
1915 * If a write error occurs remove the swap
1916 * assignment (note that PG_SWAPPED may or
1917 * may not be set depending on prior activity).
1919 * Re-dirty OBJT_SWAP pages as there is no
1920 * other backing store, we can't throw the
1923 * Non-OBJT_SWAP pages (aka swapcache) must
1924 * not be dirtied since they may not have
1925 * been dirty in the first place, and they
1926 * do have backing store (the vnode).
1928 vm_page_busy_wait(m
, FALSE
, "swadpg");
1929 vm_object_hold(m
->object
);
1930 swp_pager_meta_ctl(m
->object
, m
->pindex
,
1932 vm_page_flag_clear(m
, PG_SWAPPED
);
1933 vm_object_drop(m
->object
);
1934 if (m
->object
->type
== OBJT_SWAP
) {
1936 vm_page_activate(m
);
1938 vm_page_io_finish(m
);
1939 vm_page_flag_clear(m
, PG_SWAPINPROG
);
1942 } else if (bio
->bio_caller_info1
.index
& SWBIO_READ
) {
1944 * NOTE: for reads, m->dirty will probably be
1945 * overridden by the original caller of getpages so
1946 * we cannot set them in order to free the underlying
1947 * swap in a low-swap situation. I don't think we'd
1948 * want to do that anyway, but it was an optimization
1949 * that existed in the old swapper for a time before
1950 * it got ripped out due to precisely this problem.
1952 * If not the requested page then deactivate it.
1954 * Note that the requested page, reqpage, is left
1955 * busied, but we still have to wake it up. The
1956 * other pages are released (unbusied) by
1957 * vm_page_wakeup(). We do not set reqpage's
1958 * valid bits here, it is up to the caller.
1962 * NOTE: Can't call pmap_clear_modify(m) from an
1963 * interrupt thread, the pmap code may have to
1964 * map non-kernel pmaps and currently asserts
1967 * WARNING! The instant PG_SWAPINPROG is
1968 * cleared another cpu may start
1969 * using the mreq page (it will
1970 * check m->valid immediately).
1972 /*pmap_clear_modify(m);*/
1973 m
->valid
= VM_PAGE_BITS_ALL
;
1975 vm_page_flag_set(m
, PG_SWAPPED
);
1976 vm_page_flag_clear(m
, PG_SWAPINPROG
);
1979 * We have to wake specifically requested pages
1980 * up too because we cleared PG_SWAPINPROG and
1981 * could be waiting for it in getpages. However,
1982 * be sure to not unbusy getpages specifically
1983 * requested page - getpages expects it to be
1986 * bio_driver_info holds the requested page
1988 if (i
!= (int)(intptr_t)bio
->bio_driver_info
) {
1989 vm_page_deactivate(m
);
1996 * Mark the page clean but do not mess with the
1997 * pmap-layer's modified state. That state should
1998 * also be clear since the caller protected the
1999 * page VM_PROT_READ, but allow the case.
2001 * We are in an interrupt, avoid pmap operations.
2003 * If we have a severe page deficit, deactivate the
2004 * page. Do not try to cache it (which would also
2005 * involve a pmap op), because the page might still
2008 * When using the swap to cache clean vnode pages
2009 * we do not mess with the page dirty bits.
2011 * NOTE! Nobody is waiting for the key mreq page
2012 * on write completion.
2014 vm_page_busy_wait(m
, FALSE
, "swadpg");
2015 if (m
->object
->type
== OBJT_SWAP
)
2017 vm_page_flag_set(m
, PG_SWAPPED
);
2018 vm_page_flag_clear(m
, PG_SWAPINPROG
);
2019 if (vm_page_count_severe())
2020 vm_page_deactivate(m
);
2021 vm_page_io_finish(m
);
2022 if (bio
->bio_caller_info1
.index
& SWBIO_TTC
)
2023 vm_page_try_to_cache(m
);
2030 * adjust pip. NOTE: the original parent may still have its own
2031 * pip refs on the object.
2035 vm_object_pip_wakeup_n(object
, bp
->b_xio
.xio_npages
);
2038 * Release the physical I/O buffer.
2040 * NOTE: Due to synchronous operations in the write case b_cmd may
2041 * already be set to BUF_CMD_DONE and BIO_SYNC may have already
2044 * Use vm_token to interlock nsw_rcount/wcount wakeup?
2046 lwkt_gettoken(&vm_token
);
2047 if (bio
->bio_caller_info1
.index
& SWBIO_READ
)
2048 nswptr
= &nsw_rcount
;
2049 else if (bio
->bio_caller_info1
.index
& SWBIO_SYNC
)
2050 nswptr
= &nsw_wcount_sync
;
2052 nswptr
= &nsw_wcount_async
;
2053 bp
->b_cmd
= BUF_CMD_DONE
;
2054 relpbuf(bp
, nswptr
);
2055 lwkt_reltoken(&vm_token
);
2059 * Fault-in a potentially swapped page and remove the swap reference.
2060 * (used by swapoff code)
2062 * object must be held.
2064 static __inline
void
2065 swp_pager_fault_page(vm_object_t object
, int *sharedp
, vm_pindex_t pindex
)
2071 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2073 if (object
->type
== OBJT_VNODE
) {
2075 * Any swap related to a vnode is due to swapcache. We must
2076 * vget() the vnode in case it is not active (otherwise
2077 * vref() will panic). Calling vm_object_page_remove() will
2078 * ensure that any swap ref is removed interlocked with the
2079 * page. clean_only is set to TRUE so we don't throw away
2082 vp
= object
->handle
;
2083 error
= vget(vp
, LK_SHARED
| LK_RETRY
| LK_CANRECURSE
);
2085 vm_object_page_remove(object
, pindex
, pindex
+ 1, TRUE
);
2090 * Otherwise it is a normal OBJT_SWAP object and we can
2091 * fault the page in and remove the swap.
2093 m
= vm_fault_object_page(object
, IDX_TO_OFF(pindex
),
2095 VM_FAULT_DIRTY
| VM_FAULT_UNSWAP
,
2103 * This removes all swap blocks related to a particular device. We have
2104 * to be careful of ripups during the scan.
2106 static int swp_pager_swapoff_callback(struct swblock
*swap
, void *data
);
2109 swap_pager_swapoff(int devidx
)
2111 struct vm_object_hash
*hash
;
2112 struct swswapoffinfo info
;
2113 struct vm_object marker
;
2117 bzero(&marker
, sizeof(marker
));
2118 marker
.type
= OBJT_MARKER
;
2120 for (n
= 0; n
< VMOBJ_HSIZE
; ++n
) {
2121 hash
= &vm_object_hash
[n
];
2123 lwkt_gettoken(&hash
->token
);
2124 TAILQ_INSERT_HEAD(&hash
->list
, &marker
, object_list
);
2126 while ((object
= TAILQ_NEXT(&marker
, object_list
)) != NULL
) {
2127 if (object
->type
== OBJT_MARKER
)
2129 if (object
->type
!= OBJT_SWAP
&&
2130 object
->type
!= OBJT_VNODE
)
2132 vm_object_hold(object
);
2133 if (object
->type
!= OBJT_SWAP
&&
2134 object
->type
!= OBJT_VNODE
) {
2135 vm_object_drop(object
);
2140 * Object is special in that we can't just pagein
2141 * into vm_page's in it (tmpfs, vn).
2143 if ((object
->flags
& OBJ_NOPAGEIN
) &&
2144 RB_ROOT(&object
->swblock_root
)) {
2145 vm_object_drop(object
);
2149 info
.object
= object
;
2151 info
.devidx
= devidx
;
2152 swblock_rb_tree_RB_SCAN(&object
->swblock_root
,
2153 NULL
, swp_pager_swapoff_callback
,
2155 vm_object_drop(object
);
2157 if (object
== TAILQ_NEXT(&marker
, object_list
)) {
2158 TAILQ_REMOVE(&hash
->list
, &marker
, object_list
);
2159 TAILQ_INSERT_AFTER(&hash
->list
, object
,
2160 &marker
, object_list
);
2163 TAILQ_REMOVE(&hash
->list
, &marker
, object_list
);
2164 lwkt_reltoken(&hash
->token
);
2168 * If we fail to locate all swblocks we just fail gracefully and
2169 * do not bother to restore paging on the swap device. If the
2170 * user wants to retry the user can retry.
2172 if (swdevt
[devidx
].sw_nused
)
2180 swp_pager_swapoff_callback(struct swblock
*swap
, void *data
)
2182 struct swswapoffinfo
*info
= data
;
2183 vm_object_t object
= info
->object
;
2188 index
= swap
->swb_index
;
2189 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
2191 * Make sure we don't race a dying object. This will
2192 * kill the scan of the object's swap blocks entirely.
2194 if (object
->flags
& OBJ_DEAD
)
2198 * Fault the page, which can obviously block. If the swap
2199 * structure disappears break out.
2201 v
= swap
->swb_pages
[i
];
2202 if (v
!= SWAPBLK_NONE
&& BLK2DEVIDX(v
) == info
->devidx
) {
2203 swp_pager_fault_page(object
, &info
->shared
,
2204 swap
->swb_index
+ i
);
2205 /* swap ptr might go away */
2206 if (RB_LOOKUP(swblock_rb_tree
,
2207 &object
->swblock_root
, index
) != swap
) {
2215 /************************************************************************
2217 ************************************************************************
2219 * These routines manipulate the swap metadata stored in the
2222 * Swap metadata is implemented with a global hash and not directly
2223 * linked into the object. Instead the object simply contains
2224 * appropriate tracking counters.
2228 * Lookup the swblock containing the specified swap block index.
2230 * The caller must hold the object.
2234 swp_pager_lookup(vm_object_t object
, vm_pindex_t index
)
2236 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2237 index
&= ~(vm_pindex_t
)SWAP_META_MASK
;
2238 return (RB_LOOKUP(swblock_rb_tree
, &object
->swblock_root
, index
));
2242 * Remove a swblock from the RB tree.
2244 * The caller must hold the object.
2248 swp_pager_remove(vm_object_t object
, struct swblock
*swap
)
2250 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2251 RB_REMOVE(swblock_rb_tree
, &object
->swblock_root
, swap
);
2255 * Convert default object to swap object if necessary
2257 * The caller must hold the object.
2260 swp_pager_meta_convert(vm_object_t object
)
2262 if (object
->type
== OBJT_DEFAULT
) {
2263 object
->type
= OBJT_SWAP
;
2264 KKASSERT(object
->swblock_count
== 0);
2269 * SWP_PAGER_META_BUILD() - add swap block to swap meta data for object
2271 * We first convert the object to a swap object if it is a default
2272 * object. Vnode objects do not need to be converted.
2274 * The specified swapblk is added to the object's swap metadata. If
2275 * the swapblk is not valid, it is freed instead. Any previously
2276 * assigned swapblk is freed.
2278 * The caller must hold the object.
2281 swp_pager_meta_build(vm_object_t object
, vm_pindex_t index
, swblk_t swapblk
)
2283 struct swblock
*swap
;
2284 struct swblock
*oswap
;
2287 KKASSERT(swapblk
!= SWAPBLK_NONE
);
2288 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2291 * Convert object if necessary
2293 if (object
->type
== OBJT_DEFAULT
)
2294 swp_pager_meta_convert(object
);
2297 * Locate swblock. If not found create, but if we aren't adding
2298 * anything just return. If we run out of space in the map we wait
2299 * and, since the hash table may have changed, retry.
2302 swap
= swp_pager_lookup(object
, index
);
2307 swap
= zalloc(swap_zone
);
2312 swap
->swb_index
= index
& ~(vm_pindex_t
)SWAP_META_MASK
;
2313 swap
->swb_count
= 0;
2315 ++object
->swblock_count
;
2317 for (i
= 0; i
< SWAP_META_PAGES
; ++i
)
2318 swap
->swb_pages
[i
] = SWAPBLK_NONE
;
2319 oswap
= RB_INSERT(swblock_rb_tree
, &object
->swblock_root
, swap
);
2320 KKASSERT(oswap
== NULL
);
2324 * Delete prior contents of metadata.
2326 * NOTE: Decrement swb_count after the freeing operation (which
2327 * might block) to prevent racing destruction of the swblock.
2329 index
&= SWAP_META_MASK
;
2331 while ((v
= swap
->swb_pages
[index
]) != SWAPBLK_NONE
) {
2332 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2334 swp_pager_freeswapspace(object
, v
, 1);
2336 --mycpu
->gd_vmtotal
.t_vm
;
2340 * Enter block into metadata
2342 swap
->swb_pages
[index
] = swapblk
;
2343 if (swapblk
!= SWAPBLK_NONE
) {
2345 ++mycpu
->gd_vmtotal
.t_vm
;
2350 * SWP_PAGER_META_FREE() - free a range of blocks in the object's swap metadata
2352 * The requested range of blocks is freed, with any associated swap
2353 * returned to the swap bitmap.
2355 * This routine will free swap metadata structures as they are cleaned
2356 * out. This routine does *NOT* operate on swap metadata associated
2357 * with resident pages.
2359 * The caller must hold the object.
2361 static int swp_pager_meta_free_callback(struct swblock
*swb
, void *data
);
2364 swp_pager_meta_free(vm_object_t object
, vm_pindex_t index
, vm_pindex_t count
)
2366 struct swfreeinfo info
;
2368 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2373 if (object
->swblock_count
== 0) {
2374 KKASSERT(RB_EMPTY(&object
->swblock_root
));
2381 * Setup for RB tree scan. Note that the pindex range can be huge
2382 * due to the 64 bit page index space so we cannot safely iterate.
2384 info
.object
= object
;
2385 info
.basei
= index
& ~(vm_pindex_t
)SWAP_META_MASK
;
2387 info
.endi
= index
+ count
- 1;
2388 swblock_rb_tree_RB_SCAN(&object
->swblock_root
, rb_swblock_scancmp
,
2389 swp_pager_meta_free_callback
, &info
);
2393 * The caller must hold the object.
2397 swp_pager_meta_free_callback(struct swblock
*swap
, void *data
)
2399 struct swfreeinfo
*info
= data
;
2400 vm_object_t object
= info
->object
;
2405 * Figure out the range within the swblock. The wider scan may
2406 * return edge-case swap blocks when the start and/or end points
2407 * are in the middle of a block.
2409 if (swap
->swb_index
< info
->begi
)
2410 index
= (int)info
->begi
& SWAP_META_MASK
;
2414 if (swap
->swb_index
+ SWAP_META_PAGES
> info
->endi
)
2415 eindex
= (int)info
->endi
& SWAP_META_MASK
;
2417 eindex
= SWAP_META_MASK
;
2420 * Scan and free the blocks. The loop terminates early
2421 * if (swap) runs out of blocks and could be freed.
2423 * NOTE: Decrement swb_count after swp_pager_freeswapspace()
2424 * to deal with a zfree race.
2426 while (index
<= eindex
) {
2427 swblk_t v
= swap
->swb_pages
[index
];
2429 if (v
!= SWAPBLK_NONE
) {
2430 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2432 swp_pager_freeswapspace(object
, v
, 1);
2433 --mycpu
->gd_vmtotal
.t_vm
;
2434 if (--swap
->swb_count
== 0) {
2435 swp_pager_remove(object
, swap
);
2436 zfree(swap_zone
, swap
);
2437 --object
->swblock_count
;
2444 /* swap may be invalid here due to zfree above */
2451 * SWP_PAGER_META_FREE_ALL() - destroy all swap metadata associated with object
2453 * This routine locates and destroys all swap metadata associated with
2456 * NOTE: Decrement swb_count after the freeing operation (which
2457 * might block) to prevent racing destruction of the swblock.
2459 * The caller must hold the object.
2462 swp_pager_meta_free_all(vm_object_t object
)
2464 struct swblock
*swap
;
2467 ASSERT_LWKT_TOKEN_HELD(vm_object_token(object
));
2469 while ((swap
= RB_ROOT(&object
->swblock_root
)) != NULL
) {
2470 swp_pager_remove(object
, swap
);
2471 for (i
= 0; i
< SWAP_META_PAGES
; ++i
) {
2472 swblk_t v
= swap
->swb_pages
[i
];
2473 if (v
!= SWAPBLK_NONE
) {
2475 swp_pager_freeswapspace(object
, v
, 1);
2477 --mycpu
->gd_vmtotal
.t_vm
;
2480 if (swap
->swb_count
!= 0)
2481 panic("swap_pager_meta_free_all: swb_count != 0");
2482 zfree(swap_zone
, swap
);
2483 --object
->swblock_count
;
2486 KKASSERT(object
->swblock_count
== 0);
2490 * SWP_PAGER_METACTL() - misc control of swap and vm_page_t meta data.
2492 * This routine is capable of looking up, popping, or freeing
2493 * swapblk assignments in the swap meta data or in the vm_page_t.
2494 * The routine typically returns the swapblk being looked-up, or popped,
2495 * or SWAPBLK_NONE if the block was freed, or SWAPBLK_NONE if the block
2496 * was invalid. This routine will automatically free any invalid
2497 * meta-data swapblks.
2499 * It is not possible to store invalid swapblks in the swap meta data
2500 * (other then a literal 'SWAPBLK_NONE'), so we don't bother checking.
2502 * When acting on a busy resident page and paging is in progress, we
2503 * have to wait until paging is complete but otherwise can act on the
2506 * SWM_FREE remove and free swap block from metadata
2507 * SWM_POP remove from meta data but do not free.. pop it out
2509 * The caller must hold the object.
2512 swp_pager_meta_ctl(vm_object_t object
, vm_pindex_t index
, int flags
)
2514 struct swblock
*swap
;
2517 if (object
->swblock_count
== 0)
2518 return(SWAPBLK_NONE
);
2521 swap
= swp_pager_lookup(object
, index
);
2524 index
&= SWAP_META_MASK
;
2525 r1
= swap
->swb_pages
[index
];
2527 if (r1
!= SWAPBLK_NONE
) {
2528 if (flags
& (SWM_FREE
|SWM_POP
)) {
2529 swap
->swb_pages
[index
] = SWAPBLK_NONE
;
2530 --mycpu
->gd_vmtotal
.t_vm
;
2531 if (--swap
->swb_count
== 0) {
2532 swp_pager_remove(object
, swap
);
2533 zfree(swap_zone
, swap
);
2534 --object
->swblock_count
;
2537 /* swap ptr may be invalid */
2538 if (flags
& SWM_FREE
) {
2539 swp_pager_freeswapspace(object
, r1
, 1);
2543 /* swap ptr may be invalid */