libcompat: Remove the old and unused insque() and remque() functions.

[dragonfly.git] / sbin / newfs_hammer2 / newfs_hammer2.8

.\" Copyright (c) 2011-2014 The DragonFly Project.  All rights reserved.
.\"
.\" This code is derived from software contributed to The DragonFly Project
.\" by Matthew Dillon <dillon@backplane.com>
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\" 3. Neither the name of The DragonFly Project nor the names of its
.\"    contributors may be used to endorse or promote products derived
.\"    from this software without specific, prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd August 26, 2015
.Dt NEWFS_HAMMER2 8
.Os
.Sh NAME
.Nm newfs_hammer2
.Nd construct a new HAMMER2 file system
.Sh SYNOPSIS
.Nm
.Op Fl f
.Op Fl b Ar bootsize
.Op Fl r Ar redosize
.Op Fl V Ar version
.Op Fl L Ar label ...
.Ar special
.Sh DESCRIPTION
The
.Nm
utility prepares a
.Nm HAMMER2
volume on the specified block device.
.Nm HAMMER2
volumes can contain any number of named PFSs (Pseudo FileSystems).
Each named PFS can operate independently or be a constituent of
a larger cluster.
Regardless, you must still format each block device separately using
this command.
.Pp
The
.Nm
program always creates a PFS called "LOCAL" which may be used for
device-specific configuration.  This PFS should never be used for generic
data.
.Pp
If no
.Fl L
option is specified,
.Nm
will use the partition id to create a default label for you.
.Bl -tag -width indent
.It partition 'a'
"BOOT" is created.
.It partition 'd'
"ROOT" is created.
.It otherwise
"DATA" is created.
.El
.Pp
You can override the default PFS name by specifying one or more
.Fl L
options.
By default these PFSs all represent unclustered mount points.
.Pp
You can specify
.Fl L Ar none
if you do not want
.Nm
to create any PFSs other than "LOCAL".
.Pp
Generally speaking this command is not used to create clusters.  It is used
to format volumes which are then made available for additional clustering
commands.
Once formatted the device@LOCAL volume can be mounted in order to make it
and all other PFSs created on the volume available to the cluster.
.Pp
You can use
.Xr hammer2 8
directives to construct your cluster, including the creation of additional
PFSs within various volumes.
If you are managing several machines, or a large number of machines,
.Fl L Ar none
is typically specified to reduce clutter.
.Pp
.Nm HAMMER2
file systems are sector-size agnostic, however the
.Dx
implementation requires the sector size to be no larger than 16K.
.Nm HAMMER2
file systems start at a relative offset of 0 and leave no room for
in-band disklabels (old, traditional BSD labels).
They may only be created using out-of-band disk labels, which is the
default on
.Dx
via
.Po
.Xr disklabel 5
or
.Xr gpt 8
labels
.Pc ,
or with
old style disklabels as long as
the partition does not overlap the label area (have a starting sector
greater than 16).
.Pp
.Nm HAMMER2
file systems are designed for large storage systems, up to 1 Exabyte, and
may not operate efficiently on small storage systems.
The minimum recommended file system size is 50GB.
In addition,
.Nm HAMMER2
file systems operating normally, with automatic snapshots, do not
immediately reclaim space when files are deleted.
A regular system maintenance job runs once a day by
.Xr periodic 8
to handle reclamation.
.Pp
.Nm HAMMER2
works best when the machine's normal workload would not otherwise fill
the file system up in the course of 60 days of operation.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl b Ar bootsize
Specify a fixed area in which a boot related kernel and data can be stored.
The
.Ar bootsize
is specified in bytes.
By default a boot area of approximately 64MB will be created.
This area is not currently used for booting and may be repurposed in the
future.
.It Fl f
Force operation.
This is needed for the creation of a
.Nm HAMMER2
file system less than 10GB size or
with less than 500MB UNDO/REDO FIFO.
This should not be used under normal circumstances.
.It Fl r Ar redosize
Specify the size of the fixed REDO FIFO.
The
.Ar redosize
is specified in bytes.
By default 0.1% of the root
volume's size is used, with a reasonable minimum and a reasonable cap.
The UNDO/REDO FIFO is used to sequence meta-data out to the media for
instant crash recovery.
.It Fl V Ar version
Specify the
.Nm HAMMER2
file system version to format.
By default
.Nm
formats the file system using the highest production version number
supported by the
.Nm HAMMER2
VFS by checking the
.Va vfs.hammer2.supported_version
sysctl.
If you need to maintain compatibility with an older version of
.Nm HAMMER2
you may specify the version with this option.
.It Fl L Ar label
By default
.Nm
always creates a local master PFSs on the new volume called "LOCAL",
and will conditionally also create "BOOT", "ROOT", or "DATA" depending
on the partition ('b' creates "BOOT", 'd' creates "ROOT", and any other
partition creates "DATA").
.Pp
If you specify one or more label options to create your own named local
PFSs,
.Nm
will not create any conditional PFSs.
However, "LOCAL" is still always created and should not be
specified with this option.
If you don't want any PFSs to be created (other than "LOCAL"), use
.Fl L Ar none .
.Pp
Typically simple HAMMER2 filesystems just use the defaults and
.Fl L Ar none
is used for more complex filesystem, followed by mounting device@LOCAL
and using
.Nm hammer2
directives to create the desired cluster.
.El
.Pp
The
.Ar bootsize
and
.Ar redosize
must be given with a suffix of
.Cm K , M , G
or
.Cm T
meaning kilobyte, megabyte, gigabyte and terabyte.
Lower case can also be used for suffix.
These options create reserved blocks of space on the target volume
but are not currently used by the filesystem for anything.
.Sh EXIT STATUS
.Ex -std
.Sh EXAMPLES
.Bd -literal -offset indent
newfs_hammer2 -L SATURN-HOME /dev/ad0s1d
.Ed
.Pp
Create a file system named
.Sq SATURN-HOME
on
.Pa /dev/ad0s1d .
.Sh SEE ALSO
.Xr disklabel32 5 ,
.Xr disklabel64 5 ,
.Xr HAMMER2 5 ,
.Xr fdisk 8 ,
.Xr gpt 8 ,
.Xr mount_hammer2 8 ,
.Xr newfs 8
.Sh HISTORY
The
.Nm
utility first appeared in
.Dx 3.1
but was not enabled unconditionally until
.Dx 4.9 .
.Sh AUTHORS
.An Matthew Dillon Aq Mt dillon@backplane.com