dntpd: Fix typo.

[dragonfly.git] / sbin / mountctl / mountctl.8

.\" Copyright (c) 2003,2004 The DragonFly Project.  All rights reserved.
.\"
.\" This code is derived from software contributed to The DragonFly Project
.\" by Matthew Dillon <dillon@backplane.com>
.\"
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\" 3. Neither the name of The DragonFly Project nor the names of its
.\"    contributors may be used to endorse or promote products derived
.\"    from this software without specific, prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $DragonFly: src/sbin/mountctl/mountctl.8,v 1.15 2008/10/16 23:08:30 swildner Exp $
.\"
.Dd September 28, 2009
.Dt MOUNTCTL 8
.Os
.Sh NAME
.Nm mountctl
.Nd control journaling and other features on mounted file systems
.Sh SYNOPSIS
.Nm
.Fl l
.Brq Ar mountpt | tag | mountpt Ns : Ns Ar tag
.Nm
.Fl a
.Op Fl 2
.Op Fl w/W Ar output_path
.Op Fl x/X Ar filedesc
.Op Fl o Ar options
.Ar mountpt Ns Cm \&: Ns Ar tag
.Nm
.Fl r
.Op Fl 2
.Op Fl w/W Ar output_path
.Op Fl x/X Ar filedesc
.Ar mountpt Ns Cm \&: Ns Ar tag
.Nm
.Fl d
.Brq Ar mountpt | tag | mountpt Ns Cm \&: Ns Ar tag
.Nm
.Fl m
.Op Fl o Ar options
.Brq Ar mountpt | tag | mountpt Ns Cm \&: Ns Ar tag
.Nm
.Fl FZSCA
.Brq Ar mountpt | tag | mountpt Ns Cm \&: Ns Ar tag
.Sh DESCRIPTION
The
.Nm
utility manages journaling and (eventually) other features on a mounted
filesystem.
Note that a mount point path must begin with
.Ql / ,
and tag names must not
begin with
.Ql / .
.Pp
.Nm
.Fl l
will list all installed journals in the system or on a particular mount point
or tag, including their current state of operation.
.Pp
.Nm
.Fl a
will add a new journal to a mount point.
A mount may have any number of journals associated with it.
If no output path is specified the journal
will be written to the standard output.
Options may be specified as described in the
.Sx OPTION KEYWORDS
section.
The tag is required and must be unique
relative to any given mount, but you can use the same tag on multiple
mount points if you wish (and control them all together by referencing that
tag).
The output path may represent any streamable entity.
You can, for example,
output to a pipe into a program which does further buffering or processing
of the journal.
.Em WARNING
A stalled journaling descriptor will stall the filesystem.
Eventually a
kernel-implemented swap backing will be available for journals but that is
not the case at the moment.
.Pp
.Nm
.Fl r
will restart an existing journal, directing it to a new file descriptor.
A shutdown is sent to the old journal and the system waits for the return
direction (if running full-duplex) to EOF.
The new descriptor is then
installed and the FIFO index is reset to the last acknowledged transaction.
Clients scanning a journal across such a disconnect must check for repeated
transaction ids since some overlap between the old and new journal may occur.
.Pp
.Nm
.Fl d
will remove the specified journal(s).
A mount point, a tag, or both may be specified.
This function will operate on all matching journals.
.Pp
.Nm
.Fl m
will modify the options associated with an existing journal.
Options are specified in the
.Sx OPTION KEYWORDS
section.
.Sh OTHER OPTIONS
.Bl -tag -width indent
.It Fl 2
Specify full-duplex operation.
The kernel will not throw away journal
data in its internal FIFO until the transaction id is acknowledged.
This requires a full-duplex journaling descriptor.
Note that shell pipes are full-duplex-capable.
.It Fl F
Flush a journal, equivalent to the
.Cm flush
keyword.
This option implies
.Fl m .
.It Fl Z
Freeze a journal, equivalent to the
.Cm freeze
keyword.
This option implies
.Fl m
if
.Fl a
or
.Fl d
are not specified.
.It Fl S
Start a stopped journal, equivalent to the
.Cm start
keyword.
This option implies
.Fl m .
.It Fl C
Close a journal, equivalent to the
.Cm close
keyword.
This option implies
.Fl m .
.It Fl A
Abort a journal, equivalent to the
.Cm abort
keyword.
This option implies
.Fl m .
.It Fl w Ar output_path
Change a journal's stream descriptor to the specified path.
This option implies
.Fl m
if
.Fl a
or
.Fl d
are not specified.
The target file must not reside on the same filesystem being journaled.
.It Fl W Ar output_path
Same as
.Fl w
but overrides target safety checks.
.It Fl x Ar filedesc
Change a journal's stream descriptor to the specified file descriptor number.
This option implies
.Fl m
if
.Fl a
or
.Fl d
are not specified.
The target file must not reside on the same filesystem being journaled.
.It Fl X Ar filedesc
Same as
.Fl x
but overrides target safety checks.
.It Fl o Ar options
Specify options, see
.Sx OPTION KEYWORDS .
.El
.Sh OPTION KEYWORDS
Options keywords may be comma delimited without whitespace within a single
.Fl o
or via multiple
.Fl o
options.
Some keywords require a value which is specified as
.Ar keyword Ns = Ns Ar value .
Any option may be prefixed with
.Ql no
or
.Ql non
to turn off the option.
Some options are one-shot and have no
.Ql no
or
.Ql non
equivalent.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Cm reversable
Generate a reversable journaling stream.
This allows the target to run
the journal backwards as well as forwards to
.Ql undo
operations.
This is the default.
.It Cm twoway
Indicate that the journaling stream is a two-way stream and that transaction
id acknowledgements will be returned.
This option is the same as the
.Fl 2
option.
.It Cm memfifo= Ns Ar size Ns Op Cm k Ns , Ns Cm m
Specify the size of the in-kernel memory FIFO used to buffer the journaling
stream between processes doing filesystem operations and the worker thread
writing out the journal.
Since the kernel has limited virtual memory
buffers larger than 4MB are not recommended.
.It Cm swapfifo= Ns Ar size Ns Op Cm k Ns , Ns Cm m Ns , Ns Cm g
Specify the size of the kernel-managed swap-backed FIFO used to buffer
overflows.
.It Cm path= Ns Ar filepath
Specify where the journal's output stream should be directed.
Note that the
.Fl w
option is equivalent to specifying the path option.
Both should not be specified.
.It Cm fd= Ns Ar filedesc
Specify where the journal's output stream should be directed by handing over
a file descriptor.
Use file descriptor 1 if you wish to output the journal to the current stdout.
Note that the
.Fl w
option is equivalent to specifying the path option.
Both should not be specified.
.It Cm freeze
Freeze the worker thread.
This may cause the filesystem to stall once
the memory fifo has filled up.
A freeze point record will be written to the journal.
If used as part of the creation of a new journal via
.Fl a ,
this option will prevent any initial output to the journal and a freeze
point record will NOT be written.
Again, the filesystem will stall if the memory fifo fills up.
.It Cm start
Start or restart the worker thread after a freeze.
.It Cm close
Close the journal.
Any transactions still under way will be allowed to
complete, a closing record will be generated, and the journaling descriptor
will be closed.
If the connection is two-way the journal will away a final
acknowledgement of the closing record before closing the descriptor.
.It Cm abort
Close the journal.
Any currently buffered data will be aborted.
No close record is written.
The journaling stream is immediately closed.
.It Cm flush
Flush the journal.
All currently buffered data is flushed.
The command
does not return until the write succeeds and, if the connection is two-way,
and acknowledgement has been returned for journaled data buffered at the
time the flush was issued.
.El
.\".Sh FILES
.Sh SEE ALSO
.Xr mount 2 ,
.Xr mountctl 2 ,
.Xr jscan 8
.Sh HISTORY
The
.Nm
utility first appeared in
.Dx 1.2 .
.Sh CAVEATS
This utility is currently under construction and not all features have been
implemented yet.
In fact, most have not.
.\".Sh BUGS