Give krateprintf() an initial burst capability if count is set to
[dragonfly.git] / etc / MAKEDEV
blobac394762b5e3d314015e258c851dcc34fbaecc20
1 #!/bin/sh -
3 # Copyright (c) 1990 The Regents of the University of California.
4 # All rights reserved.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.41 2008/04/23 09:44:07 hasso Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
34 # Tapes:
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
39 # Disks:
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
43 # ad* ATA disks
44 # afd* ATAPI floppy disks
45 # amrd* AMI MegaRAID
46 # ccd* CCD disks
47 # cd* SCSI CD-ROM disks
48 # da* SCSI Direct Access Devices
49 # fd* floppy disk drives (3 1/2", 5 1/4")
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
52 # ipsd* IBM ServeRAID
53 # md* Memory (or malloc) disk
54 # mlx* Mylex DAC960 RAID controllers
55 # mlxd* Mylex DAC960 RAID disk volumes
56 # pst* Promise SuperTrak RAID disks
57 # vn* vnode disks
58 # vkd* virtual kernel disk
60 # Console ports:
61 # vty* virtual console devices for syscons
63 # Pointing devices:
64 # mse* Logitech and ATI Inport bus mouse
65 # psm* PS/2 mouse
66 # jogdial Sony VAIO Jogdial
67 # sysmouse Mousesystems mouse emulator for syscons
69 # Terminal ports:
70 # tty* general purpose serial ports
71 # cua* dialout serial ports
72 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
73 # cuaA* Specialix SI/XIO dialout ports
74 # ttyD* Digiboard - 16 dialin ports
75 # cuaD* Digiboard - 16 dialout ports
76 # ttyE* Stallion EasyIO (stl) dialin ports
77 # cuaE* Stallion EasyIO (stl) dialout ports
78 # ttyF* Stallion Brumby (stli) dialin ports
79 # cuaF* Stallion Brumby (stli) dialout ports
80 # ttyR* Rocketport dialin ports
81 # cuaR* Rocketport dialout ports
83 # stlN Stallion EasyIO board N dialin and dialout
84 # stliN Stallion Brumby board N dialin and dialout
86 # Pseudo terminals:
87 # pty* set of 32 master and slave pseudo terminals
88 # vty* virtual terminals using syscons console
90 # Parallel port:
91 # lpt* Printer
92 # ppi* Parallel port i/o
93 # pps* Pulse per second timing interface
94 # pcfclock* Parallel time sync interface
96 # I2C and SMBus:
97 # iic* I2C devices
98 # smb* SMBUS devices
100 # USB devices:
101 # usb* USB bus control device
102 # ucom* USB serial devices
103 # ugen* generic USB device
104 # uhid* Human Interface Device (HID)
105 # ulpt* printer
106 # umodem* modems
107 # ums* mouse
108 # urio* Diamond Rio 500
109 # uscanner* USB scanners
111 # SCSI devices (other than CD-ROM, tape and disk):
112 # ch* SCSI Media-Changer (juke box) driver
113 # pt* Processor Type (HP scanner, as one example)
114 # pass* CAM Passthrough device
115 # ses* SES (SCSI Environmental Services) and
116 # SAF-TE (SCSI Accessible Fault-Tolerant Enclosures) device
118 # PC-CARD (previously called PCMCIA) support
119 # card* PC-CARD slots
121 # ISDN devices:
122 # i4b isdnd call control device
123 # i4bctl debugging control device
124 # i4btrc* trace data interface(s), one per passive card
125 # i4btel* telephony interface(s)
126 # i4bteld* telephony dialout interface(s)
127 # i4brbch* raw b channel access device(s)
129 # Special purpose devices:
130 # acpi ACPI control device
131 # apm Advanced Power Management BIOS
132 # apmctl APM BIOS control device
133 # bpf* packet filter
134 # crypto crypto interface
135 # speaker pc speaker
136 # tw* xten power controller
137 # snd* various sound cards
138 # pcaudio PCM audio driver
139 # socksys iBCS2 socket system driver
140 # vat VAT compatibility audio driver (requires snd*)
141 # gsc Genius GS-4500 hand scanner
142 # joy pc joystick
143 # tun* Tunneling IP device
144 # tap* Ethernet Tunneling device
145 # snp* tty snoop devices
146 # spigot Video Spigot video acquisition card
147 # ctx* Cortex-I video acquisition card
148 # meteor* Matrox Meteor video acquisition card (pci)
149 # bktr* Bt848 based video acquisition card (pci)
150 # labpc* National Instrument's Lab-PC and LAB-PC+
151 # perfmon CPU performance-monitoring counters
152 # pci PCI configuration-space access from user mode
153 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
154 # kbd keyboard devices
155 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
156 # agpgart AGP interface
157 # nsmb* SMB/CIFS protocol interface
158 # pf PF packet filter
159 # cmx Omnikey CardMan 4040 smartcard reader
161 ##############################################################################
163 # To override the default ownership and/or permissions, you now have the
164 # /etc/devices.conf file (create it if it's not there). Entries in this file
165 # should look like:
167 # ad0s1c root:staff 666 # Override ad0s1c
168 # ad0* root:wheel 641 # Override the entire ad0 family
169 # sa0.ctl heinz:ketchup 444 # Override device control node
170 # sa*.ctl heinz:ketchup 666 # Override all sa* control nodes
171 # fd/4 ihate:floppies 000 # Override /dev/fd/4
173 # See the devices.conf(5) man page for further information.
175 # J.Anslik (joerg@anslik.de)
177 ##############################################################################
181 #-----------------------------------------------------------------------------
182 # Where all device special files are built.
183 #-----------------------------------------------------------------------------
185 DEVDIR=dev
188 #-----------------------------------------------------------------------------
189 # File containing local ownership and permissions override entries.
190 #-----------------------------------------------------------------------------
192 DEVPERMS_LOCAL="/etc/devices.conf"
195 #-----------------------------------------------------------------------------
196 # Some useful programs.
197 #-----------------------------------------------------------------------------
199 cut=/usr/bin/cut
200 grep=/usr/bin/grep
201 mknod=/sbin/mknod
202 sed=/usr/bin/sed
203 tr=/usr/bin/tr
206 #-----------------------------------------------------------------------------
207 # Set up a default search path.
208 #-----------------------------------------------------------------------------
210 if [ -n "$MAKEDEVPATH" ]
211 then
212 PATH="$MAKEDEVPATH"
213 else
214 PATH=/sbin:/bin
218 #-----------------------------------------------------------------------------
219 # Print error message $2 and exit this script, returning $1.
220 #-----------------------------------------------------------------------------
222 die()
224 echo $2
226 exit $1
230 #-----------------------------------------------------------------------------
231 # Convert integer to partition name.
232 #-----------------------------------------------------------------------------
234 dkitop()
236 local p
238 case $1 in
239 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;;
240 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
241 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;;
242 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
243 *) p="?";;
244 esac
246 echo $p
250 #-----------------------------------------------------------------------------
251 # Convert integer to slice name.
252 #-----------------------------------------------------------------------------
254 dkitos()
256 local s
258 case $1 in
259 0) s="s0" ;;
260 1) s="" ;;
261 *) s=s$(($1-1)) ;;
262 esac
264 echo $s
267 #-----------------------------------------------------------------------------
268 # Convert unit, slice, partition to minor number.
269 #-----------------------------------------------------------------------------
271 # ndkminor(unit, slice, partition)
273 ndkminor()
275 echo $(( (($1 & 31) << 3) | (($1 & 480) << 16) | \
276 (($2 & 15) << 16) | (($2 & 112) << 25) | \
277 ($3 & 7) | (($3 & 8) << 17) | (($3 & 240) << 21) ))
281 #-----------------------------------------------------------------------------
282 # Create the device node.
283 #-----------------------------------------------------------------------------
285 mknod() {
287 local dev=$1
288 local unit=$2
290 #---------------------------------------------------------------------
291 # Remove old device node, if any.
292 #---------------------------------------------------------------------
294 rm -f "$dev$unit" || exit 1
297 #---------------------------------------------------------------------
298 # Supply default ownership and/or permissions according to the
299 # number of parameters passed to this function.
300 #---------------------------------------------------------------------
302 case $# in
303 5) owner=root:wheel; perms=600;;
304 6) owner=$6; perms=600;;
305 7) owner=$6; perms=$7;;
306 *) die 2 "Bad call: mknod $@";;
307 esac
310 #---------------------------------------------------------------------
311 # Get rid of first two parameters (no longer needed)
312 #---------------------------------------------------------------------
314 shift; shift
317 #---------------------------------------------------------------------
318 # If there's a /etc/devices.conf file, check for local overrides.
319 #---------------------------------------------------------------------
321 if [ -s $DEVPERMS_LOCAL ]
322 then
323 #-------------------------------------------------------------
324 # Temporarily prepend the device portion with a subdir name
325 # if we're not in $DEVDIR. We need to do this to distinguish
326 # between device nodes that live in /dev, and device nodes
327 # that live in /dev/subdir, like /dev/fd. This way, we can
328 # have "fd*" entries in the permission files, as well as
329 # "fd/*" stuff.
330 #-------------------------------------------------------------
332 tmpdev=$dev
333 pwd=`/usr/bin/basename $PWD`
335 [ "$pwd" = "$DEVDIR" ] || dev="${pwd}/$dev"
338 #-------------------------------------------------------------
339 # Check /etc/devices.conf for local overrides
340 #-------------------------------------------------------------
342 match=`$grep ^$dev$unit[[:space:]] $DEVPERMS_LOCAL | \
343 $sed 's/\*/\\\*/'`
345 [ "$match" ] ||
346 if [ `expr "$unit" : '\(.*\)\.ctl$'` ]
347 then
348 match=`$grep ^$dev\\\*\\\.ctl[[:space:]] \
349 $DEVPERMS_LOCAL | $sed 's/\*/\\\*/'`
350 else
351 match=`$grep ^$dev\\\*[[:space:]] $DEVPERMS_LOCAL | \
352 $sed 's/\*/\\\*/'`
355 if [ "$match" ]
356 then
357 # Separate each field by one space character...
358 match=`echo $match | $tr -s "[:space:]" " "`
360 # ...and extract owenership and permissions.
361 owner=`echo $match | $cut -d' ' -f2`
362 perms=`echo $match | $cut -d' ' -f3`
365 #-------------------------------------------------------------
366 # Restore "plain" device name (no prepending subdir name).
367 #-------------------------------------------------------------
369 dev=$tmpdev
372 #---------------------------------------------------------------------
373 # Finally, set ownership and permissions.
374 #---------------------------------------------------------------------
376 $mknod $dev$unit $1 $2 $3 $owner
377 chmod $perms $dev$unit
381 #-----------------------------------------------------------------------------
382 # Convert tape (ctrl, unit, mode, access) to device minor number.
383 #-----------------------------------------------------------------------------
385 saminor()
387 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
391 #-----------------------------------------------------------------------------
392 # Convert the last character of a tty name to a device minor number.
393 #-----------------------------------------------------------------------------
395 ttyminor()
397 case $1 in
398 [0-9]) m=$1;;
399 a) m=10;; b) m=11;; c) m=12;; d) m=13;;
400 e) m=14;; f) m=15;; g) m=16;; h) m=17;;
401 i) m=18;; j) m=19;; k) m=20;; l) m=21;;
402 m) m=22;; n) m=23;; o) m=24;; p) m=25;;
403 q) m=26;; r) m=27;; s) m=28;; t) m=29;;
404 u) m=30;; v) m=31;;
405 *) m="?";;
406 esac
408 echo $m
412 #-----------------------------------------------------------------------------
413 # Convert a unit number to a device minor number.
414 #-----------------------------------------------------------------------------
416 unit2minor()
418 echo $(((($1 >> 8) << 16) | ($1 % 256)))
422 #-----------------------------------------------------------------------------
423 # Stallion devices need some (weird) special treatment.
424 #-----------------------------------------------------------------------------
426 stallion()
428 major=$1
429 letter=$2
430 card=$3
431 iscallout=$4
433 port=0
434 maxport=8
435 pref=tty
436 owner=
437 minorbase=0
439 if [ $iscallout -gt 0 ]
440 then
441 pref=cua
442 owner=uucp:dialer
443 minorbase=128
446 case "$card" in
447 [0-7]);;
448 *) die 1 "Invalid stl card number $card";;
449 esac
451 # Make the mem interface for extracting stats & loading microcode.
452 # 0x1000000 + card number
453 mknod staliomem $card c $major 0x0100000$card
455 while [ $port -lt $maxport ]
457 minor=$(($minorbase + $card * 1048576 + $port))
459 [ $port -lt 32 ] || minor=$(($minor + 65504))
461 unit=$(($card * 64 + $port))
463 mknod ${pref}${letter} $unit c $major $minor $owner
464 mknod ${pref}i${letter} $unit c $major $(($minor + 32)) $owner
465 mknod ${pref}l${letter} $unit c $major $(($minor + 64)) $owner
467 port=$(($port + 1))
468 done
472 #-----------------------------------------------------------------------------
473 # Do it.
474 #-----------------------------------------------------------------------------
476 for i in $*; do
477 case $i in
479 all)
480 rm -f *.compat
481 sh MAKEDEV std # standard
482 sh MAKEDEV fd0 fd1 # bdev, floppy disk
483 sh MAKEDEV da0 da1 da2 da3 da4 da5 da6 da7 # bdev, SCSI disk
484 sh MAKEDEV da8 da9 da10 da11 da12 da13 da14 # bdev, SCSI disk
485 sh MAKEDEV da15 # bdev, SCSI disk
486 sh MAKEDEV ccd0 ccd1 ccd2 ccd3 # ccd disk
487 sh MAKEDEV ata # cdev, ATA control
488 sh MAKEDEV ad0 ad1 ad2 ad3 ad4 ad5 ad6 ad7 # bdev, ATA disk
489 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
490 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
491 sh MAKEDEV vn0 vn1 vn2 vn3 # bdev, virtual disk
492 sh MAKEDEV vkd0 # bdev, virtual disk
493 sh MAKEDEV cd0 # bdev, cdrom
494 sh MAKEDEV sa0 wt0 # bdev, tape
495 sh MAKEDEV vty12 # cdev, virtual tty
496 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
497 sh MAKEDEV pty0 # cdev, pseudo tty
498 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
499 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
500 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
501 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
502 sh MAKEDEV ipsd0 # cdev, ServeRAID disk
503 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
504 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
505 sh MAKEDEV iic0 iic1 # cdev, I2C device
506 sh MAKEDEV smb0 smb1 # cdev, SMBus device
507 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
508 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
509 sh MAKEDEV usb2 usb3 usb4 usb5 usb6 usb7 # cdev, USB devices
510 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
511 sh MAKEDEV ucom0 ucom1 ucom2 ucom3 # cdev, USB serial devices
512 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
513 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
514 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
515 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
516 sh MAKEDEV acpi # cdev, laptop
517 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
518 sh MAKEDEV pass4 xpt2 # cdev, CAM
519 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
520 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
521 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
522 sh MAKEDEV agpgart # cdev, AGP
523 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
524 sh MAKEDEV twed0 # 3ware
525 sh MAKEDEV crypto # cdev, crypto
526 sh MAKEDEV fw0 # cdev, firewire
527 sh MAKEDEV dcons # cdev, dcons
528 sh MAKEDEV pf # pf
532 #-----------------------------------------------------------------------------
533 # A much restricted set of the above, to save precious i-nodes on the
534 # fixit floppy
535 #-----------------------------------------------------------------------------
537 fixit)
538 sh MAKEDEV std # standard
539 sh MAKEDEV fd0 # bdev, floppy disk
540 sh MAKEDEV da0 # bdev, SCSI disk
541 sh MAKEDEV ad0 # bdev, ATA disk
542 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
543 sh MAKEDEV vn0 # bdev, virtual disk
544 sh MAKEDEV vkd0 # bdev, virtual disk
545 sh MAKEDEV cd0 # bdev, cdrom
546 sh MAKEDEV sa0 # bdev, tape
547 sh MAKEDEV vty2 # cdev, virtual tty
548 sh MAKEDEV cuaa0 # cdev, serial tty
549 sh MAKEDEV pty0 # cdev, pseudo tty
550 sh MAKEDEV ttyd0 # cdev, serial tty
551 sh MAKEDEV kbd0 # cdev, keyboard
552 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
553 sh MAKEDEV lpt0 # cdev, printer
554 sh MAKEDEV ppi0 # cdev, parallel port
555 sh MAKEDEV iic0 # cdev, I2C device
556 sh MAKEDEV smb0 # cdev, SMBus device
557 sh MAKEDEV ums0 # cdev, USB devices
558 sh MAKEDEV tun0 # cdev, network
559 sh MAKEDEV tap0 # cdev, network
560 sh MAKEDEV ch0 # cdev, miscellaneous
561 sh MAKEDEV apm apmctl card0 # cdev, laptop
562 sh MAKEDEV pass1 xpt1 # cdev, CAM
563 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
564 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
565 sh MAKEDEV i4brbch0 # cdev, ISDN
566 rm -f fd/[1-9]?
569 #-----------------------------------------------------------------------------
570 # Upgrade existing node set.
572 # 1.9 - disk devices have changed
573 #-----------------------------------------------------------------------------
574 upgrade)
575 echo -n "upgrading... "
576 for i in aacd ad ar afd amrd ccd da fd idad ipsd md \
577 mlxd pst twed vn vkd
579 for j in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
581 if [ -c $i$j ]; then
582 rm -f $i$j
583 rm -f $i${j}[a-p]
584 echo -n " $i$j $i${j}s0[a-p] $i${j}s1[a-p]"
585 sh MAKEDEV $i$j
586 # s0 and s1 handled by base
587 for k in s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 \
588 s12 s13 s14 s15
590 if [ -c $i$j${k}c ]; then
591 rm -f ${i}${j}${k}*
592 echo -n " $i$j$k"
593 sh MAKEDEV $i$j$k
594 echo -n " $i$j$k[a-p]"
595 sh MAKEDEV $i$j${k}a
596 elif [ -c $i$j$k ]; then
597 rm -f ${i}${j}${k}*
598 echo -n " $i$j$k"
599 sh MAKEDEV $i$j$k
601 done
603 done
604 done
605 for i in acd cd vcd
607 for j in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
609 if [ -c $i$j ]; then
610 rm -f ${i}${j}*
611 echo -n " $i$j $i${j}s0 $i${j}[a-p]"
612 sh MAKEDEV $i$j
613 elif [ -c $i${j}c ]; then
614 rm -f ${i}${j}*
615 echo -n " $i$j $i${j}s0 $i${j}[a-p]"
616 sh MAKEDEV $i$j
618 done
619 done
620 echo ""
623 #-----------------------------------------------------------------------------
624 # Basic device node set.
625 #-----------------------------------------------------------------------------
627 std)
628 mknod console "" c 0 0
629 mknod kmem "" c 2 1 root:kmem 640
630 mknod mem "" c 2 0 root:kmem 640
631 mknod null "" c 2 2 root:wheel 666
632 mknod random "" c 2 3 root:wheel 644
633 mknod urandom "" c 2 4 root:wheel 644
634 mknod zero "" c 2 12 root:wheel 666
635 mknod io "" c 2 14
636 mknod tty "" c 1 0 root:wheel 666
637 mknod klog "" c 7 0
638 mknod stdin "" c 22 0 root:wheel 666
639 mknod stdout "" c 22 1 root:wheel 666
640 mknod stderr "" c 22 2 root:wheel 666
641 mknod pci "" c 78 0 root:wheel 644
644 #---------------------------------------------------------------------
645 # Create floppy disk nodes in /dev/fd
646 #---------------------------------------------------------------------
648 mkdir -p fd
650 (cd fd &&
651 i=0 &&
652 while [ $i -lt 64 ]
654 mknod $i "" c 22 $i root:wheel 666
656 i=$(($i + 1))
657 done)
659 chmod 555 fd
662 #-----------------------------------------------------------------------------
664 jail)
665 sh MAKEDEV std pty0
667 rm mem kmem pci io klog console
669 ln -sf null mem
670 ln -sf null kmem
671 ln -sf null console
674 #-----------------------------------------------------------------------------
676 mach-4)
677 mknod iopl "" c 22 0
678 mknod kbd "" c 23 0
679 mknod mouse "" c 24 0
680 mknod time "" c 25 0
681 mknod timezone "" c 26 0
684 #-----------------------------------------------------------------------------
686 wt*)
687 u=`expr $i : '..\(.*\)'`
689 [ "$u" ] || u=0
691 # Default density, 512b blocks
692 mknod rwt $u c 10 $((0 + $u)) root:operator 660
693 mknod nrwt $u c 10 $((4 + $u)) root:operator 660
695 # Default density, 1024b blocks
696 # mknod rWt $u c 10 $((64 + $u)) root:operator 660
697 # mknod nrWt $u c 10 $((68 + $u)) root:operator 660
698 mknod rwt ${u}b c 10 $((16 + $u)) root:operator 660 # 60 MB
699 mknod nrwt ${u}b c 10 $((20 + $u)) root:operator 660
700 mknod rwt ${u}c c 10 $((24 + $u)) root:operator 660 # 120 MB
701 mknod nrwt ${u}c c 10 $((28 + $u)) root:operator 660
702 mknod rwt ${u}d c 10 $((32 + $u)) root:operator 660 # 150 MB
703 mknod nrwt ${u}d c 10 $((36 + $u)) root:operator 660
704 # mknod rwt ${u}e c 10 $((40 + $u)) root:operator 660 # 300 MB?
705 # mknod nrwt ${u}e c 10 $((44 + $u)) root:operator 660
706 # mknod rwt ${u}f c 10 $((48 + $u)) root:operator 660 # 600 MB?
707 # mknod nrwt ${u}f c 10 $((52 + $u)) root:operator 660
710 #-----------------------------------------------------------------------------
712 aacd*s*|acd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|ccd*s*|da*s*|fd*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|vkd*s*)
713 case $i in
714 aacd*s*) name=aacd; chr=151;;
715 acd*s*) name=acd; chr=117;;
716 ad*s*) name=ad; chr=116;;
717 ar*s*) name=ar; chr=157;;
718 afd*s*) name=afd; chr=118;;
719 amrd*s*) name=amrd; chr=133;;
720 ccd*s*) name=ccd; chr=74;;
721 da*s*) name=da; chr=13;;
722 fd*s*) name=fd; chr=9;;
723 idad*s*) name=idad; chr=109;;
724 ipsd*s*) name=ipsd; chr=176;;
725 md*s*) name=md; chr=95;;
726 mlxd*s*) name=mlxd; chr=131;;
727 pst*s*) name=pst; chr=168;;
728 twed*s*) name=twed; chr=147;;
729 vn*s*) name=vn; chr=43;;
730 vkd*s*) name=vkd; chr=97;;
731 esac
733 case $i in
734 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
735 unit=`expr $i : '....\([0-9]*\)s'`
736 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
737 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
740 acd*s*|afd*s*|ccd*s*|pst*s*|wfd*s*|vkd*s*)
741 unit=`expr $i : '...\([0-9]*\)s'`
742 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
743 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
746 unit=`expr $i : '..\([0-9]*\)s'`
747 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
748 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
750 esac
752 case $unit in
753 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
754 case $slice in
755 [0-9]|[1-2][0-9]|30)
756 # [no s*] == whole-disk slice (slice #1 in minor)
757 # s0 == slice #0 in minor (compatibility slice)
758 # s1 == slice #2 in minor
759 # s2 == slice #3 in minor
760 # etc..
762 # set slice to slice-in-minor-number
763 oldslice=$slice
764 if [ $oldslice -eq 0 ]; then
765 slice=$(($oldslice))
766 else
767 slice=$(($slice+1))
769 slicename=`dkitos $slice`
770 minor=`ndkminor $unit $slice 255`
771 mknod ${name} $unit$slicename c $chr $minor \
772 root:operator 640
774 # raw device names are extinct
775 rm -f r$name$unit$slicename
777 # get rid of old compatibility devices, the new
778 # ones use 's0', e.g. da0s0a
779 for i in a b c d e f g h i j k l m n o p
781 rm -f $name$unit$i
782 done
784 case $part in [a-p])
786 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
788 minor=`ndkminor $unit $slice $part`
789 partname=`dkitop $part`
790 mknod $name $unit$slicename$partname \
791 c $chr $minor root:operator 640
792 rm -f r$name$unit$slicename$partname
793 done
796 "") ;;
797 *) echo bad partition for disk in: $i
799 esac
802 echo bad slice for disk in: $i
804 esac
807 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
809 esac
812 #-----------------------------------------------------------------------------
814 control-fd*)
815 unit=`expr $i : '..........\(.*\)'`
816 name=fd; chr=9
818 case $unit in
819 0|1|2|3)
820 minor=`ndkminor $unit 1 129`
821 mknod $name ${unit}.1720 c $chr $minor
822 rm -f r${name}${unit}.1720
824 minor=`ndkminor $unit 1 130`
825 mknod $name ${unit}.1480 c $chr $minor
826 rm -f r${name}${unit}.1480
828 minor=`ndkminor $unit 1 131`
829 mknod $name ${unit}.1440 c $chr $minor
830 rm -f r${name}${unit}.1440
832 minor=`ndkminor $unit 1 132`
833 mknod $name ${unit}.1200 c $chr $minor
834 rm -f r${name}${unit}.1200
836 minor=`ndkminor $unit 1 133`
837 mknod $name ${unit}.820 c $chr $minor
838 rm -f r${name}${unit}.820
840 minor=`ndkminor $unit 1 134`
841 mknod $name ${unit}.800 c $chr $minor
842 rm -f r${name}${unit}.800
844 minor=`ndkminor $unit 1 135`
845 mknod $name ${unit}.720 c $chr $minor
846 rm -f r${name}${unit}.720
848 minor=`ndkminor $unit 1 136`
849 mknod $name ${unit}.360 c $chr $minor
850 rm -f r${name}${unit}.360
852 minor=`ndkminor $unit 1 137`
853 mknod $name ${unit}.640 c $chr $minor
854 rm -f r${name}${unit}.640
856 minor=`ndkminor $unit 1 138`
857 mknod $name ${unit}.1232 c $chr $minor
858 rm -f r${name}${unit}.1232
861 echo bad unit for disk in: $i
863 esac
866 #-----------------------------------------------------------------------------
868 acd*t*)
869 units=`expr $i : '...\(.*\)t'`;
870 tracks=`expr $i : '.*t\(.*\)'`;
871 name=acd;
872 chr=117;
874 [ "$units" ] || units=0
875 [ "$tracks" ] || tracks=100
877 if [ "$units" -le 31 -a "$tracks" -le 169 ]
878 then
880 while [ $i -le $units ]
882 dname=$name$i
883 rm -rf ${dname}t*
886 while [ $j -le $tracks ]
888 # cd unit tracks use the compatibility slice
889 # and partition numbers 129+ for tracks 1+.
891 minor=`ndkminor $i 1 $(($j + 128))`
892 mknod ${dname}t $j c $chr $minor \
893 root:operator 640
894 j=$(($j + 1))
895 done
897 i=$(($i + 1))
898 done
899 else
900 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
904 #-----------------------------------------------------------------------------
906 aacd*|acd*|ad*|ar*|afd*|amrd*|cd*|ccd*|da*|fd*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vcd*|vn*|vkd*)
907 doslices=1
908 directraw=0
909 case $i in
910 aacd*) name=aacd; chr=151;;
911 acd*) name=acd; chr=117; doslices=0; directraw=1;;
912 ad*) name=ad; chr=116;;
913 ar*) name=ar; chr=157;;
914 afd*) name=afd; chr=118;;
915 amrd*) name=amrd; chr=133;;
916 cd*) name=cd; chr=15; doslices=0;;
917 da*) name=da; chr=13;;
918 fd*) name=fd; chr=9;;
919 ccd*) name=ccd; chr=74;;
920 idad*) name=idad; chr=109;;
921 ipsd*) name=ipsd; chr=176;;
922 md*) name=md; chr=95;;
923 mlxd*) name=mlxd; chr=131;;
924 pst*) name=pst; chr=168;;
925 twed*) name=twed; chr=147;;
926 vcd*) name=vcd; chr=98; doslices=0;;
927 vn*) name=vn; chr=43;;
928 vkd*) name=vkd; chr=97;;
929 esac
931 case $i in
932 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
933 unit=`expr $i : '....\(.*\)'`
935 acd*|afd*|ccd*|pst*|wfd*|vcd*|vkd*)
936 unit=`expr $i : '...\(.*\)'`
939 unit=`expr $i : '..\(.*\)'`
941 esac
943 case $i in
944 fd*)
945 sh MAKEDEV control-$name$unit
947 esac
949 case $unit in
950 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
951 if [ "$doslices" -gt 0 ]; then
952 minor=`ndkminor $unit 1 255`
953 mknod ${name} ${unit} c $chr $minor \
954 root:operator 640
955 for slicepartname in s0h s1h s2 s3 s4
957 sh MAKEDEV $name$unit$slicepartname
958 done
959 else
960 if [ "$directraw" -gt 0 ]; then
961 minor=`ndkminor $unit 1 128`
962 mknod ${name} ${unit} c $chr $minor \
963 root:operator 640
964 else
965 minor=`ndkminor $unit 1 255`
966 mknod ${name} ${unit} c $chr $minor \
967 root:operator 640
969 minor=`ndkminor $unit 1 255`
970 mknod ${name} ${unit}s0 c $chr $minor \
971 root:operator 640
972 minor=`ndkminor $unit 0 0`
973 mknod ${name} ${unit}a c $chr $minor \
974 root:operator 640
975 minor=`ndkminor $unit 0 2`
976 mknod ${name} ${unit}c c $chr $minor \
977 root:operator 640
981 echo bad unit for disk in: $i
983 esac
986 #-----------------------------------------------------------------------------
988 pt[0-9]*)
989 chr=61
990 name=pt
991 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
993 [ "$unit" ] || unit=0
995 unit=$(($unit + 1 - 1))
996 mknod $name $unit c $chr `unit2minor $unit`
999 #-----------------------------------------------------------------------------
1001 ses[0-9]*)
1002 chr=110
1003 name=ses
1004 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
1006 [ "$unit" ] || unit=0
1008 unit=$(($unit + 1 - 1))
1009 mknod $name $unit c $chr `unit2minor $unit`
1012 #-----------------------------------------------------------------------------
1014 targ[0-9]*)
1015 chr=65
1016 name=targ
1017 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
1019 [ "$unit" ] || unit=0
1021 unit=$(($unit + 1 - 1))
1023 mknod $name $unit c $chr `unit2minor $unit`
1024 mknod ${name}.ctl "" c $chr 0xffff00ff
1027 #-----------------------------------------------------------------------------
1029 # CAM transport layer device
1030 xpt*)
1031 # This major number is temporary
1032 chr=104
1033 name=xpt
1034 units=`expr $i : 'xpt\(.*\)'`
1036 [ "$units" ] || units=1
1039 while [ $i -lt $units ]
1041 rm -rf $name$i
1043 mknod $name $i c $chr `unit2minor $i` root:operator
1045 i=$(($i + 1))
1046 done
1049 #-----------------------------------------------------------------------------
1051 pass*)
1052 # This major number is temporary
1053 chr=31
1054 name=pass
1055 units=`expr $i : 'pass\(.*\)'`
1057 [ "$units" ] || units=1
1060 while [ $i -lt $units ]
1062 rm -rf $name$i
1064 mknod $name $i c $chr `unit2minor $i` root:operator
1066 i=$(($i + 1))
1067 done
1070 #-----------------------------------------------------------------------------
1072 pty*)
1073 class=`expr $i : 'pty\(.*\)'`
1074 case $class in
1075 0) offset=0 name=p;;
1076 1) offset=32 name=q;;
1077 2) offset=64 name=r;;
1078 3) offset=96 name=s;;
1079 4) offset=128 name=P;; # Note that xterm (at least) only look at p-s.
1080 5) offset=160 name=Q;;
1081 6) offset=192 name=R;;
1082 7) offset=224 name=S;;
1083 *) echo bad unit for pty in: $i;;
1084 esac
1086 case $class in
1087 0|1|2|3|4|5|6|7)
1089 while [ $i -lt 32 ]
1091 c=$(echo 0123456789abcdefghijklmnopqrstuv |
1092 dd bs=1 skip=$i count=1 2>/dev/null)
1094 mknod tty$name $c c 5 $(($offset + $i)) root:wheel 666
1095 mknod pty$name $c c 6 $(($offset + $i)) root:wheel 666
1097 i=$(($i + 1))
1098 done
1100 esac
1103 #-----------------------------------------------------------------------------
1105 sa*)
1106 unit=`expr $i : '..\(.*\)'`
1107 chr=14
1109 case $unit in
1110 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
1111 mknod sa ${unit}.ctl c $chr `saminor 1 ${unit} 0 0` \
1112 root:wheel 660
1113 ln -f sa${unit}.ctl rsa${unit}.ctl
1115 for m in 0 1 2 3
1117 mknod sa ${unit}.$m c $chr \
1118 `saminor 0 $unit $m 0` root:operator 660
1119 ln -f sa${unit}.$m rsa${unit}.$m
1121 mknod nsa ${unit}.$m c $chr \
1122 `saminor 0 $unit $m 1` root:operator 660
1123 ln -f nsa${unit}.$m nrsa${unit}.$m
1125 mknod esa ${unit}.$m c $chr \
1126 `saminor 0 $unit $m 2` root:operator 660
1127 ln -f esa${unit}.$m ersa${unit}.$m
1128 done
1130 ln -f sa${unit}.0 sa$unit
1131 ln -f sa${unit}.0 rsa${unit}.0
1132 ln -f sa${unit}.0 rsa$unit
1133 ln -f nsa${unit}.0 nsa$unit
1134 ln -f nsa${unit}.0 nrsa${unit}.0
1135 ln -f nsa${unit}.0 nrsa$unit
1136 ln -f esa${unit}.0 esa$unit
1137 ln -f esa${unit}.0 ersa${unit}.0
1138 ln -f esa${unit}.0 ersa$unit
1141 echo bad unit for tape in: $i
1143 esac
1146 #-----------------------------------------------------------------------------
1148 ch*)
1149 unit=`expr $i : '..\(.*\)'`
1151 case $i in
1152 ch*) name=ch; chr=17;;
1153 esac
1155 case $unit in
1156 0|1|2|3|4|5|6)
1157 mknod $name $unit c $chr $unit root:operator 640
1160 echo bad unit for media changer in: $i
1162 esac
1165 #-----------------------------------------------------------------------------
1167 ata)
1168 mknod ata "" c 159 0 root:operator
1171 #-----------------------------------------------------------------------------
1173 ast*)
1174 unit=`expr $i : '...\(.*\)'`
1175 chr=119
1177 case $unit in
1178 0|1|2|3)
1179 mknod ast $unit c $chr $(($unit * 8 + 0)) root:operator 640
1180 mknod nast $unit c $chr $(($unit * 8 + 1)) root:operator 640
1183 echo bad unit for tape in: $i
1185 esac
1188 #-----------------------------------------------------------------------------
1190 iic*)
1191 unit=`expr $i : 'iic\(.*\)'`
1193 mknod iic $unit c 105 `unit2minor $unit`
1196 #-----------------------------------------------------------------------------
1198 smb*)
1199 unit=`expr $i : 'smb\(.*\)'`
1201 mknod smb $unit c 106 `unit2minor $unit`
1204 #-----------------------------------------------------------------------------
1206 pcfclock*)
1207 unit=`expr $i : 'pcfclock\(.*\)'`
1209 mknod pcfclock $unit c 140 `unit2minor $unit`
1212 #-----------------------------------------------------------------------------
1214 ppi*)
1215 unit=`expr $i : 'ppi\(.*\)'`
1217 mknod ppi $unit c 82 `unit2minor $unit`
1220 #-----------------------------------------------------------------------------
1222 pps*)
1223 unit=`expr $i : 'pps\(.*\)'`
1225 mknod pps $unit c 89 `unit2minor $unit`
1228 #-----------------------------------------------------------------------------
1230 usb)
1231 mknod usb "" c 108 255 root:operator 0660
1234 #-----------------------------------------------------------------------------
1236 usb*)
1237 unit=`expr $i : 'usb\(.*\)'`
1239 mknod usb $unit c 108 `unit2minor $unit` root:operator 660
1242 #-----------------------------------------------------------------------------
1244 ucom*)
1245 unit=`expr $i : 'ucom\(.*\)'`
1247 minor=$(($unit + 128))
1248 minor=`unit2minor $(($unit + 128))`
1250 mknod ucom $unit c 138 $minor uucp:dialer 660
1253 #-----------------------------------------------------------------------------
1255 uhid*)
1256 unit=`expr $i : 'uhid\(.*\)'`
1258 mknod uhid $unit c 122 `unit2minor $unit` root:operator 660
1261 #-----------------------------------------------------------------------------
1263 ums*)
1264 unit=`expr $i : 'ums\(.*\)'`
1266 mknod ums $unit c 111 `unit2minor $unit` root:operator 660
1269 #-----------------------------------------------------------------------------
1271 ulpt*)
1272 unit=`expr $i : 'ulpt\(.*\)'`
1274 minor=`unit2minor $unit`
1275 mknod ulpt $unit c 113 $minor
1277 minor=`unit2minor $(($unit + 64))`
1278 mknod unlpt $unit c 113 $minor # and the 'no prime' version
1281 #-----------------------------------------------------------------------------
1283 ugen*)
1284 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1285 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1287 [ "$unit" ] || echo $i - Invalid unit number
1289 if [ -z "${endpoint}" ] # ugen0 & ugen0.1 - ugen0.15
1290 then
1291 mknod ugen $unit c 114 `unit2minor $(($unit * 16))` \
1292 root:operator 660
1294 while [ $i -lt 16 ]
1296 mknod ugen $unit.$i c 114 `unit2minor \
1297 $(($unit * 16 + $i))` root:operator 660
1299 i=$(($i + 1))
1300 done
1301 else
1302 minor=`unit2minor $(($unit * 16 + $endpoint))`
1303 mknod ugen $unit.$endpoint c 114 $minor root:operator 660
1307 #-----------------------------------------------------------------------------
1309 urio*)
1310 unit=`expr $i : 'urio\(.*\)'`
1312 mknod urio $unit c 143 `unit2minor $unit` root:operator 660
1315 #-----------------------------------------------------------------------------
1317 uscanner*)
1318 unit=`expr $i : 'uscanner\(.*\)'`
1320 mknod uscanner $unit c 156 `unit2minor $unit` root:operator 660
1323 #-----------------------------------------------------------------------------
1325 umodem*)
1326 unit=`expr $i : 'umodem\(.*\)'`
1328 mknod umodem $unit c 124 `unit2minor $unit` uucp:dialer 660
1331 #-----------------------------------------------------------------------------
1333 lpt*)
1334 unit=`expr $i : 'lpt\(.*\)'`
1336 mknod lpt $unit c 16 `unit2minor $unit`
1337 mknod lpctl $unit c 16 `unit2minor $(($unit + 128))`
1340 #-----------------------------------------------------------------------------
1342 vty*)
1343 chr=12
1344 units=`expr $i : 'vty\(.*\)'`
1347 while [ $i -lt $units ]
1349 mknod ttyv $(printf %01x $i) c $chr `unit2minor $i`
1351 i=$(($i + 1))
1352 done
1354 ln -fs ttyv0 vga
1357 #-----------------------------------------------------------------------------
1359 nmdm*)
1360 units=`expr $i : 'nmdm\(.*\)'`
1361 chr=18
1364 while [ $i -lt $units ]
1366 minor=`unit2minor $i`
1367 minor=$(($minor + $minor))
1368 mknod nmdm ${i}A c $chr $minor
1369 mknod nmdm ${i}B c $chr $(($minor + 1))
1371 i=$(($i + 1))
1372 done
1375 #-----------------------------------------------------------------------------
1377 bpf*)
1378 nbpf=`expr $i : 'bpf\(.*\)$'`
1380 unit=0
1381 while [ $unit -le $nbpf ]
1383 mknod bpf $unit c 23 `unit2minor $unit`
1385 unit=$(($unit + 1))
1386 done
1389 #-----------------------------------------------------------------------------
1391 speaker)
1392 mknod speaker "" c 26 0
1395 #-----------------------------------------------------------------------------
1397 cua?|cuaa?|cuaa??)
1398 unit_low=`expr $i : 'cua.*\(.\)$'`
1400 case $i in
1401 cua?|cuaa?)
1402 unit_high=""
1403 m_high=0
1405 cuaa??)
1406 unit_high=`expr $i : 'cuaa\(.\).$'`
1407 m_high=`ttyminor $unit_high`
1409 esac
1411 unit=$unit_high$unit_low
1412 m=$(($m_high << 16 | `ttyminor $unit_low`))
1414 mknod cuaa $unit c 28 $(($m | 128)) uucp:dialer 660
1415 mknod cuaia $unit c 28 $(($m | 32 | 128)) uucp:dialer 660
1416 mknod cuala $unit c 28 $(($m | 64 | 128)) uucp:dialer 660
1419 #-----------------------------------------------------------------------------
1421 crypto)
1422 mknod crypto "" c 70 0 root:operator 666
1425 #-----------------------------------------------------------------------------
1428 mknod pf "" c 73 0 root:operator 600
1431 #-----------------------------------------------------------------------------
1433 fw?)
1434 unit=`expr $i : 'fw\(.\)$'`
1436 for sub in 0 1 2 3
1438 minor=$(($unit << 16 | $sub))
1439 mknod fw $unit.$sub c 127 $minor root:operator 660
1440 mknod fwmem $unit.$sub c 127 $((1<<24 | $minor)) \
1441 root:operator 660
1442 done
1444 ln -sf fw$unit.0 fw$unit
1445 ln -sf fwmem$unit.0 fwmem$unit
1448 #-----------------------------------------------------------------------------
1450 dcons)
1451 mknod dcons "" c 184 0 root:wheel 600
1454 #-----------------------------------------------------------------------------
1456 tty?|tty0?|ttyd?|ttyd??)
1457 unit_low=`expr $i : 'tty.*\(.\)$'`
1459 case $i in
1460 tty?|tty0?|ttyd?)
1461 unit_high=""
1462 m_high=0
1464 ttyd??)
1465 unit_high=`expr $i : 'ttyd\(.\).$'`
1466 m_high=`ttyminor $unit_high`
1468 esac
1470 unit=$unit_high$unit_low
1471 m=$(($m_high << 16 | `ttyminor $unit_low`))
1473 mknod ttyd $unit c 28 $m
1474 mknod ttyid $unit c 28 $(($m | 32))
1475 mknod ttyld $unit c 28 $(($m | 64))
1478 #-----------------------------------------------------------------------------
1480 cuac?)
1481 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1482 g h i j k l m n o p q r s t u v"
1483 major=48
1484 card=`expr $i : 'cua.*\(.\)$'`
1486 for unit in $portlist
1488 minor=`ttyminor $unit`
1489 minor=$(($card * 65536 + $minor))
1490 name=$card$unit
1492 mknod cuac $name c $major $(($minor + 128)) uucp:dialer 660
1493 mknod cuaic $name c $major $(($minor + 32 + 128)) \
1494 uucp:dialer 660
1495 mknod cualc $name c $major $(($minor + 64 + 128)) \
1496 uucp:dialer 660
1497 done
1500 #-----------------------------------------------------------------------------
1502 ttyc?)
1503 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1504 g h i j k l m n o p q r s t u v"
1505 major=48
1506 card=`expr $i : 'tty.*\(.\)$'`
1508 for unit in $portlist
1510 minor=`ttyminor $unit`
1511 minor=$(($card * 65536 + $minor))
1512 name=$card$unit
1514 mknod ttyc $name c $major $minor
1515 mknod ttyic $name c $major $(($minor + 32))
1516 mknod ttylc $name c $major $(($minor + 64))
1517 done
1520 #-----------------------------------------------------------------------------
1522 cuam?)
1523 unit=`expr $i : 'cua.*\(.\)$'`
1525 m=`ttyminor $unit`
1527 mknod cuam $unit c 63 $(($m + 128)) uucp:dialer 660
1530 #-----------------------------------------------------------------------------
1532 ttym?)
1533 unit=`expr $i : 'tty.*\(.\)$'`
1535 m=`ttyminor $unit`
1537 mknod ttym $unit c 63 $m
1540 #-----------------------------------------------------------------------------
1542 ttyA*)
1543 major=68
1544 nports=`expr $i : 'ttyA\(.*\)$'`
1545 port=1
1547 while [ $port -le $nports ]
1549 minor=$(($port - 1))
1550 name=$(printf %02d $port)
1552 mknod ttyA $name c $major $minor
1553 mknod ttyiA $name c $major $(($minor + 65536))
1554 mknod ttylA $name c $major $(($minor + 131072))
1556 port=$(($port + 1))
1557 done
1559 # For the user-mode control program, 'sicontrol'
1560 mknod si_control "" c 68 262144
1563 #-----------------------------------------------------------------------------
1565 cuaA*)
1566 major=68
1567 nports=`expr $i : 'cuaA\(.*\)$'`
1568 port=1
1570 while [ $port -le $nports ]
1572 minor=$(($port - 1))
1573 name=$(printf %02d $port)
1575 mknod cuaA $name c $major $(($minor + 128)) uucp:dialer 660
1576 mknod cuaiA $name c $major $(($minor + 128 + 65536)) \
1577 uucp:dialer 660
1578 mknod cualA $name c $major $(($minor + 128 + 131072)) \
1579 uucp:dialer 660
1581 port=$(($port + 1))
1582 done
1585 #-----------------------------------------------------------------------------
1587 ttyD?)
1588 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1589 major=58
1590 card=`expr $i : 'tty.*\(.\)$'`
1592 for unit in $portlist
1594 minor=`ttyminor $unit`
1595 minor=$(($card * 65536 + $minor))
1596 name=$card$unit
1598 mknod ttyD $name c $major $minor
1599 mknod ttyiD $name c $major $(($minor + 32))
1600 mknod ttylD $name c $major $(($minor + 64))
1601 done
1604 #-----------------------------------------------------------------------------
1606 cuaD?)
1607 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1608 major=58
1609 card=`expr $i : 'cua.*\(.\)$'`
1611 for unit in $portlist
1613 minor=`ttyminor $unit`
1614 minor=$(($card * 65536 + $minor))
1615 name=$card$unit
1617 mknod cuaD $name c $major $(($minor + 128)) uucp:dialer 660
1618 mknod cuaiD $name c $major $(($minor + 32 + 128)) \
1619 uucp:dialer 660
1620 mknod cualD $name c $major $(($minor + 64 + 128)) \
1621 uucp:dialer 660
1622 done
1625 #-----------------------------------------------------------------------------
1627 ttyE*)
1628 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1630 cuaE*)
1631 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1633 stl*)
1634 card=`expr $i : 'stl\(.\)$'`
1635 stallion 72 E $card 0
1636 stallion 72 E $card 1
1639 ttyF*)
1640 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1642 cuaF*)
1643 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1645 stli*)
1646 card=`expr $i : 'stl\(.\)$'`
1647 stallion 75 F $card 0
1648 stallion 75 F $card 1
1651 ttyM*)
1652 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1653 modulelist="a b c d"
1654 major=101
1655 card=`expr $i : 'tty.*\(.\)$'`
1657 for unit in $modulelist
1659 moduleminor=`ttyminor $unit`
1660 moduleminor=$(($moduleminor % 10 * 16))
1661 modulename=$unit
1663 for unit in $portlist
1665 minor=`ttyminor $unit`
1666 minor=$(($card * 65536 + $minor + $moduleminor))
1667 name=$card$modulename$unit
1669 rm -f tty*M$name
1671 mknod ttyM $name c $major $minor
1672 mknod ttyiM $name c $major $(($minor + 64))
1673 mknod ttylM $name c $major $(($minor + 128))
1674 done
1675 done
1678 cuaM?)
1679 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1680 modulelist="a b c d"
1681 major=101
1682 card=`expr $i : 'cua.*\(.\)$'`
1684 for unit in $modulelist
1686 moduleminor=`ttyminor $unit`
1687 moduleminor=$(($moduleminor % 10 * 16))
1688 modulename=$unit
1690 for unit in $portlist
1692 minor=`ttyminor $unit`
1693 minor=$(($card * 65536 + $minor + $moduleminor))
1694 name=$card$modulename$unit
1696 rm -f cua*M$name
1698 mknod cuaM $name c $major $(($minor + 262144)) \
1699 uucp:dialer 660
1700 mknod cuaiM $name c $major $(($minor + 64 + 262144)) \
1701 uucp:dialer 660
1702 mknod cualM $name c $major $(($minor + 128 + 262144)) \
1703 uucp:dialer 660
1704 done
1705 done
1708 ttyR?)
1709 major=81
1710 BOARD=1; Rnum=0
1711 MINOR=$(($BOARD * 65536))
1712 controllers=$(
1713 dmesg | while read first rest
1715 case "$first" in
1716 RocketPort[0-4]) echo "$first"
1718 esac
1719 done)
1721 rm -f ttyR* ttyiR* ttylR*
1723 for i in $controllers
1725 ndevices=$(
1726 dmesg | while read first bar ports rest
1728 case "$first" in
1729 $i*) echo "$ports"
1731 esac
1732 done)
1734 echo -n "Creating $ndevices devices for $i: "
1735 dev=0
1737 while [ $dev -lt $ndevices ]
1739 mknod ttyR $Rnum c $major $MINOR
1740 mknod ttyiR $Rnum c $major $(($MINOR + 32))
1741 mknod ttylR $Rnum c $major $(($MINOR + 64))
1743 Rnum=$(($Rnum + 1))
1744 MINOR=$(($MINOR + 1))
1746 dev=$(($dev + 1))
1747 done
1749 BOARD=$(($BOARD + 1))
1750 MINOR=$(($BOARD * 65536))
1751 echo " "
1752 done
1755 cuaR?)
1756 major=81
1757 BOARD=1; Rnum=0
1758 MINOR=$(($BOARD * 65536))
1759 controllers=$(
1760 dmesg | while read first rest
1762 case "$first" in
1763 RocketPort[0-4]) echo "$first"
1765 esac
1766 done)
1768 rm -f cuaR* cuaiR* cualR*
1770 for i in $controllers
1772 ndevices=$(
1773 dmesg | while read first bar ports rest
1775 case "$first" in
1776 $i*) echo "$ports"
1778 esac
1779 done)
1781 echo -n "Creating $ndevices devices for $i: "
1782 dev=0
1784 while [ $dev -lt $ndevices ]
1786 mknod cuaR $Rnum c $major $(($MINOR + 128)) \
1787 uucp:dialer 660
1788 mknod cuaiR $Rnum c $major $(($MINOR + 128 + 32)) \
1789 uucp:dialer 660
1790 mknod cualR $Rnum c $major $(($MINOR + 128 + 64)) \
1791 uucp:dialer 660
1793 Rnum=$(($Rnum + 1))
1794 MINOR=$(($MINOR + 1))
1796 dev=$(($dev + 1))
1797 done
1799 BOARD=$(($BOARD + 1))
1800 MINOR=$(($BOARD * 65536))
1801 echo " "
1802 done
1805 #-----------------------------------------------------------------------------
1807 mse*)
1808 unit=`expr $i : 'mse\(.*\)'`
1809 chr=27
1811 # Non-blocking for X11
1812 mknod mse $unit c $chr `unit2minor $(($unit * 2 + 1))`
1815 #-----------------------------------------------------------------------------
1817 psm*)
1818 unit=`expr $i : 'psm\(.*\)'`
1819 chr=21
1821 # Non-blocking for X11
1822 mknod psm $unit c $chr `unit2minor $(($unit * 2 + 1))`
1825 #-----------------------------------------------------------------------------
1827 mouse*)
1828 name=`expr $i : 'mouse\(.*\)'`
1830 [ -c $name ] || $0 $name # Make the appropriate device
1832 ln -fs $name mouse
1835 #-----------------------------------------------------------------------------
1837 pcaudio)
1838 mknod pcaudio "" c 24 0
1839 mknod pcaudioctl "" c 24 128
1842 #-----------------------------------------------------------------------------
1844 socksys)
1845 mknod socksys "" c 41 0 root:wheel 666
1846 mknod spx "" c 41 1 root:wheel 666
1848 ln -fs socksys nfsd
1851 #-----------------------------------------------------------------------------
1853 snd*)
1855 unit=`expr $i : 'snd\(.*\)'`
1856 chr=30
1858 ln -fs mixer$unit mixer
1859 ln -fs sequencer$unit sequencer
1860 ln -fs dsp$unit dsp
1861 ln -fs audio$unit audio
1862 ln -fs dspW$unit dspW
1863 ln -fs music$unit music
1864 ln -fs pss$unit pss
1865 ln -fs dsp$unit.0 dsp$unit
1866 ln -fs audio$unit.0 audio$unit
1867 ln -fs dspW$unit.0 dspW$unit
1869 mknod mixer $unit c $chr `unit2minor $(($unit * 16 + 0))` \
1870 root:wheel 666
1871 mknod sequencer $unit c $chr `unit2minor $(($unit * 16 + 1))` \
1872 root:wheel 666
1873 mknod midi $unit c $chr `unit2minor $(($unit * 16 + 2))` \
1874 root:wheel 666
1876 for chn in 0 1 2 3
1878 minor=$(($chn * 65536 + $unit * 16))
1880 mknod dsp $unit.$chn c $chr $(($minor + 3)) root:wheel 666
1881 mknod audio $unit.$chn c $chr $(($minor + 4)) root:wheel 666
1882 mknod dspW $unit.$chn c $chr $(($minor + 5)) root:wheel 666
1883 done
1885 mknod sndstat "" c $chr 6 root:wheel 666
1886 mknod music $unit c $chr `unit2minor $(($unit * 16 + 8))` root:wheel 666
1887 mknod pss $unit c $chr `unit2minor $(($unit * 16 + 9))` root:wheel 666
1890 #-----------------------------------------------------------------------------
1892 vat)
1893 mknod vatio "" c 25 128 root:wheel 660
1896 #-----------------------------------------------------------------------------
1898 gsc*)
1899 unit=`expr $i : 'gsc\(.*\)'`
1901 mknod gsc $unit c 47 `unit2minor $unit` root:wheel 666
1902 mknod gsc ${unit}p c 47 `unit2minor $(($unit + 8))` root:wheel 666
1903 mknod gsc ${unit}d c 47 `unit2minor $(($unit + 32))` root:wheel 666
1904 mknod gsc ${unit}pd c 47 `unit2minor $(($unit + 40))` root:wheel 666
1907 #-----------------------------------------------------------------------------
1909 acpi)
1910 mknod acpi "" c 152 0 root:operator 664
1913 #-----------------------------------------------------------------------------
1915 apm)
1916 mknod apm "" c 39 0 root:operator 664
1919 #-----------------------------------------------------------------------------
1921 apmctl)
1922 mknod apmctl "" c 39 8 root:operator 660
1925 #-----------------------------------------------------------------------------
1927 card*)
1928 unit=`expr $i : 'card\(.*\)'`
1929 chr=50
1931 mknod card $unit c $chr `unit2minor $unit` root:wheel 644
1934 #-----------------------------------------------------------------------------
1936 ttyx?|ttyy?|ttyz?)
1937 case $i in
1938 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1939 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1940 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1941 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1942 esac
1944 case $i in
1945 ttyy?) unit=$(($unit + 16));;
1946 ttyz?) unit=$(($unit + 32));;
1947 esac
1949 mknod $i "" c 42 $unit
1952 #-----------------------------------------------------------------------------
1954 cronyx)
1955 mknod cronyx "" c 42 63
1958 #-----------------------------------------------------------------------------
1960 joy)
1961 mknod joy 0 c 51 0 root:operator 640
1962 mknod joy 1 c 51 1 root:operator 640
1965 #-----------------------------------------------------------------------------
1967 spigot)
1968 mknod spigot "" c 11 0 root:wheel 444
1971 #-----------------------------------------------------------------------------
1973 ctx?)
1974 unit=`expr $i : 'ctx\(.*\)'`
1976 mknod ctx $unit c 40 `unit2minor $unit` root:wheel 444
1979 #-----------------------------------------------------------------------------
1981 meteor?)
1982 unit=`expr $i : 'meteor\(.*\)'`
1984 mknod meteor $unit c 67 `unit2minor $unit` root:wheel 444
1987 #-----------------------------------------------------------------------------
1989 bktr?)
1990 unit=`expr $i : 'bktr\(.*\)'`
1992 mknod bktr $unit c 92 `unit2minor $unit` root:wheel 444
1993 mknod tuner $unit c 92 `unit2minor $((16 + $unit))` root:wheel 444
1994 mknod vbi $unit c 92 `unit2minor $((32 + $unit))` root:wheel 444
1997 #-----------------------------------------------------------------------------
1999 tun*)
2000 ntun=`expr $i : 'tun\(.*\)$'`
2001 unit=0
2003 while [ $unit -le $ntun ]
2005 mknod tun $unit c 52 `unit2minor $unit`
2007 unit=$(($unit + 1))
2008 done
2011 #-----------------------------------------------------------------------------
2013 tap*)
2014 ntap=`expr $i : 'tap\(.*\)$'`
2015 unit=0
2017 while [ $unit -le $ntap ]
2019 mknod tap $unit c 149 `unit2minor $unit` root:network
2021 unit=$(($unit + 1))
2022 done
2025 #-----------------------------------------------------------------------------
2027 sysmouse)
2028 mknod sysmouse "" c 12 128
2029 mknod consolectl "" c 12 255
2032 #-----------------------------------------------------------------------------
2034 jogdial)
2035 mknod jogdial "" c 160 0
2038 #-----------------------------------------------------------------------------
2040 snp?)
2041 unit=`expr $i : 'snp\(.*\)'`
2043 mknod snp $unit c 53 `unit2minor $unit`
2046 #-----------------------------------------------------------------------------
2048 labpc*)
2049 case $i in
2050 labpcaio*)
2051 name=labpcaio
2052 unit=`expr $i : 'labpcaio\(.*\)'`
2053 all="0 1 2 3 4 5 6 7"
2054 offset=0
2057 labpcdio*)
2058 name=labpcdio
2059 unit=`expr $i : 'labpcdio\(.*\)'`
2060 all="0 1 2 3"
2061 offset=8
2065 die 3 "Don't know LabPC type $i"
2067 esac
2069 [ "${unit}" ] || unit=all
2071 case $unit in
2072 0|1|2|3|4|5|6|7)
2073 mknod $name $unit c 66 $(($offset + $unit)) \
2074 root:wheel 660
2077 all)
2078 for i in $all
2080 mknod $name $i c 66 $(($offset + $i)) \
2081 root:wheel 660
2082 done
2086 echo "No such LabPC unit: $unit"
2088 esac
2091 #-----------------------------------------------------------------------------
2093 perfmon)
2094 mknod perfmon "" c 2 32 root:kmem 640
2097 #-----------------------------------------------------------------------------
2099 ipl)
2100 mknod ipl "" c 79 0
2101 mknod ipnat "" c 79 1
2102 mknod ipstate "" c 79 2
2103 mknod ipauth "" c 79 3
2106 #-----------------------------------------------------------------------------
2108 elan*)
2109 mknod elan-mmcr "" c 100 0 root:wheel 600
2112 #-----------------------------------------------------------------------------
2114 kbd*)
2115 unit=`expr $i : 'kbd\(.*\)'`
2116 chr=112
2118 mknod kbd $unit c $chr `unit2minor $unit`
2121 #-----------------------------------------------------------------------------
2123 i4b)
2124 mknod i4b "" c 60 0
2127 i4bctl)
2128 mknod i4bctl "" c 55 0
2131 i4brbch*)
2132 unit=`expr $i : 'i4brbch\(.*\)'`
2134 mknod i4brbch $unit c 57 `unit2minor $unit`
2137 i4bteld*)
2138 offset=64
2139 unit=`expr $i : 'i4bteld\(.*\)'`
2141 mknod i4bteld $unit c 56 `unit2minor $(($offset + $unit))`
2144 i4btel*)
2145 unit=`expr $i : 'i4btel\(.*\)'`
2147 mknod i4btel $unit c 56 `unit2minor $unit`
2150 i4btrc*)
2151 unit=`expr $i : 'i4btrc\(.*\)'`
2153 mknod i4btrc $unit c 59 `unit2minor $unit`
2156 #-----------------------------------------------------------------------------
2158 aac*)
2159 unit=`expr $i : 'aac\(.*\)'`
2161 mknod aac $unit c 150 `unit2minor $unit`
2163 ln -fs aac$unit afa$unit
2164 ln -fs aac$unit hpn$unit
2167 #-----------------------------------------------------------------------------
2169 mlx*)
2170 unit=`expr $i : 'mlx\(.*\)'`
2172 mknod mlx $unit c 130 `unit2minor $unit`
2175 #-----------------------------------------------------------------------------
2177 amr*)
2178 unit=`expr $i : 'amr\(.*\)'`
2180 mknod amr $unit c 132 `unit2minor $unit`
2183 #-----------------------------------------------------------------------------
2185 ips*)
2186 unit=`expr $i : 'ips\(.*\)'`
2188 mknod mlx $unit c 175 `unit2minor $unit`
2191 #-----------------------------------------------------------------------------
2193 ciss*)
2194 unit=`expr $i : 'ciss\(.*\)'`
2196 mknod ciss $unit c 166 `unit2minor $unit`
2199 #-----------------------------------------------------------------------------
2201 agpgart)
2202 mknod agpgart "" c 148 0
2205 #-----------------------------------------------------------------------------
2207 twe*)
2208 unit=`expr $i : 'twe\(.*\)'`
2210 mknod twe $unit c 146 `unit2minor $unit`
2213 #-----------------------------------------------------------------------------
2215 tw*)
2216 unit=`expr $i : 'tw\(.*\)'`
2218 mknod tw $unit c 19 `unit2minor $unit` root:operator
2221 #-----------------------------------------------------------------------------
2223 nsmb*)
2224 unit=`expr $i : 'nsmb\(.*\)'`
2226 mknod nsmb $unit c 144 $unit
2229 #-----------------------------------------------------------------------------
2231 cmx*)
2232 unit=`expr $i : 'cmx\(.*\)'`
2234 mknod cmx $unit c 185 $unit
2236 #-----------------------------------------------------------------------------
2238 local)
2239 umask 0
2240 sh MAKEDEV.local
2241 umask 77
2244 #-----------------------------------------------------------------------------
2247 echo $i - no such device name
2250 esac
2251 done