| blob | 7171c847a5748e598386714290d4a328a896706e |
1 /* Interface between the opcode library and its callers.
3 Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2, or (at your option)
8 any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place - Suite 330,
18 Boston, MA 02111-1307, USA.
20 Written by Cygnus Support, 1993.
22 The opcode library (libopcodes.a) provides instruction decoders for
23 a large variety of instruction sets, callable with an identical
24 interface, for making instruction-processing programs more independent
25 of the instruction set being processed. */
27 #ifndef DIS_ASM_H
28 #define DIS_ASM_H
30 #ifdef __cplusplus
32 #endif
34 #include <stdio.h>
47 dis_dref2 /* Two data references in instruction */
48 };
50 /* This struct is passed into the instruction decoding routine,
51 and is passed back out into each callback. The various fields are used
52 for conveying information from your main routine into your callbacks,
53 for passing information into the instruction decoders (such as the
54 addresses of the callback functions), or for passing information
55 back from the instruction decoders to their callers.
57 It must be initialized before it is first passed; this can be done
58 by hand, or using one of the initialization macros below. */
61 fprintf_ftype fprintf_func;
65 /* Target description. We could replace this with a pointer to the bfd,
66 but that would require one. There currently isn't any such requirement
67 so to avoid introducing one we record these explicitly. */
68 /* The bfd_flavour. This can be bfd_target_unknown_flavour. */
70 /* The bfd_arch value. */
72 /* The bfd_mach value. */
74 /* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */
76 /* An arch/mach-specific bitmask of selected instruction subsets, mainly
77 for processors with run-time-switchable instruction sets. The default,
78 zero, means that there is no constraint. CGEN-based opcodes ports
79 may use ISA_foo masks. */
82 /* Some targets need information about the current section to accurately
83 display insns. If this is NULL, the target disassembler function
84 will have to make its best guess. */
87 /* An array of pointers to symbols either at the location being disassembled
88 or at the start of the function being disassembled. The array is sorted
89 so that the first symbol is intended to be the one used. The others are
90 present for any misc. purposes. This is not set reliably, but if it is
91 not NULL, it is correct. */
93 /* Number of symbols in array. */
96 /* For use by the disassembler.
97 The top 16 bits are reserved for public use (and are documented here).
98 The bottom 16 bits are for the internal use of the disassembler. */
100 #define INSN_HAS_RELOC 0x80000000
103 /* Function used to get bytes to disassemble. MEMADDR is the
104 address of the stuff to be disassembled, MYADDR is the address to
105 put the bytes in, and LENGTH is the number of bytes to read.
106 INFO is a pointer to this struct.
107 Returns an errno value or 0 for success. */
112 /* Function which should be called if we get an error that we can't
113 recover from. STATUS is the errno value from read_memory_func and
114 MEMADDR is the address that we were trying to read. INFO is a
115 pointer to this struct. */
119 /* Function called to print ADDR. */
123 /* Function called to determine if there is a symbol at the given ADDR.
124 If there is, the function returns 1, otherwise it returns 0.
125 This is used by ports which support an overlay manager where
126 the overlay number is held in the top part of an address. In
127 some circumstances we want to include the overlay number in the
128 address, (normally because there is a symbol associated with
129 that address), but sometimes we want to mask out the overlay bits. */
133 /* Function called to check if a SYMBOL is can be displayed to the user.
134 This is used by some ports that want to hide special symbols when
135 displaying debugging outout. */
139 /* These are for buffer_read_memory. */
141 bfd_vma buffer_vma;
144 /* This variable may be set by the instruction decoder. It suggests
145 the number of bytes objdump should display on a single line. If
146 the instruction decoder sets this, it should always set it to
147 the same value in order to get reasonable looking output. */
150 /* The next two variables control the way objdump displays the raw data. */
151 /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
152 /* output will look like this:
153 00: 00000000 00000000
154 with the chunks displayed according to "display_endian". */
158 /* Number of octets per incremented target address
159 Normally one, but some DSPs have byte sizes of 16 or 32 bits. */
162 /* Results from instruction decoders. Not all decoders yet support
163 this information. This info is set each time an instruction is
164 decoded, and is only valid for the last such instruction.
166 To determine whether this decoder supports this information, set
167 insn_info_valid to 0, decode an instruction, then check it. */
171 a branch takes effect. (0 = normal) */
175 zero if unknown. */
178 /* Command line options specific to the target disassembler. */
183 \f
184 /* Standard disassemblers. Disassemble one instruction at the given
185 target address. Return number of octets processed. */
264 /* Fetch the disassembler for a given BFD, if that support is available. */
267 /* Amend the disassemble_info structure as necessary for the target architecture.
268 Should only be called after initialising the info->arch field. */
271 /* Document any target specific options available from the disassembler. */
274 \f
275 /* This block of definitions is for particular callers who read instructions
276 into a buffer before calling the instruction decoder. */
278 /* Here is a function which callers may wish to use for read_memory_func.
279 It gets bytes from a buffer. */
283 /* This function goes with buffer_read_memory.
284 It prints a message using info->fprintf_func and info->stream. */
288 /* Just print the address in hex. This is included for completeness even
289 though both GDB and objdump provide their own (to print symbolic
290 addresses). */
294 /* Always true. */
298 /* Also always true. */
299 extern bfd_boolean generic_symbol_is_valid
302 /* Method to initialize a disassemble_info struct. This should be
303 called by all applications creating such a struct. */
305 fprintf_ftype fprintf_func);
307 /* For compatibility with existing code. */
308 #define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
309 init_disassemble_info (&(INFO), (STREAM), (fprintf_ftype) (FPRINTF_FUNC))
310 #define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
311 init_disassemble_info (&(INFO), (STREAM), (fprintf_ftype) (FPRINTF_FUNC))
314 #ifdef __cplusplus
315 }
316 #endif