Correct math and limerick.
[dragonfly.git] / contrib / tcpdump / print-sll.c
bloba044de6709fbe5ba666db7842e73e4e843f63e5a
1 /*
2 * Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that: (1) source code distributions
7 * retain the above copyright notice and this paragraph in its entirety, (2)
8 * distributions including binary code include the above copyright notice and
9 * this paragraph in its entirety in the documentation or other materials
10 * provided with the distribution, and (3) all advertising materials mentioning
11 * features or use of this software display the following acknowledgement:
12 * ``This product includes software developed by the University of California,
13 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
14 * the University nor the names of its contributors may be used to endorse
15 * or promote products derived from this software without specific prior
16 * written permission.
17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
21 #ifndef lint
22 static const char rcsid[] _U_ =
23 "@(#) $Header: /tcpdump/master/tcpdump/print-sll.c,v 1.19 2005-11-13 12:12:43 guy Exp $ (LBL)";
24 #endif
26 #ifdef HAVE_CONFIG_H
27 #include "config.h"
28 #endif
30 #include <tcpdump-stdinc.h>
32 #include <stdio.h>
33 #include <string.h>
34 #include <pcap.h>
36 #include "interface.h"
37 #include "addrtoname.h"
38 #include "ethertype.h"
39 #include "extract.h"
41 #include "ether.h"
42 #include "sll.h"
44 const struct tok sll_pkttype_values[] = {
45 { LINUX_SLL_HOST, "In" },
46 { LINUX_SLL_BROADCAST, "B" },
47 { LINUX_SLL_MULTICAST, "M" },
48 { LINUX_SLL_OTHERHOST, "P" },
49 { LINUX_SLL_OUTGOING, "Out" },
50 { 0, NULL}
53 static inline void
54 sll_print(register const struct sll_header *sllp, u_int length)
56 u_short ether_type;
58 printf("%3s ",tok2str(sll_pkttype_values,"?",EXTRACT_16BITS(&sllp->sll_pkttype)));
61 * XXX - check the link-layer address type value?
62 * For now, we just assume 6 means Ethernet.
63 * XXX - print others as strings of hex?
65 if (EXTRACT_16BITS(&sllp->sll_halen) == 6)
66 (void)printf("%s ", etheraddr_string(sllp->sll_addr));
68 if (!qflag) {
69 ether_type = EXTRACT_16BITS(&sllp->sll_protocol);
71 if (ether_type <= ETHERMTU) {
73 * Not an Ethernet type; what type is it?
75 switch (ether_type) {
77 case LINUX_SLL_P_802_3:
79 * Ethernet_802.3 IPX frame.
81 (void)printf("802.3");
82 break;
84 case LINUX_SLL_P_802_2:
86 * 802.2.
88 (void)printf("802.2");
89 break;
91 default:
93 * What is it?
95 (void)printf("ethertype Unknown (0x%04x)",
96 ether_type);
97 break;
99 } else {
100 (void)printf("ethertype %s (0x%04x)",
101 tok2str(ethertype_values, "Unknown", ether_type),
102 ether_type);
104 (void)printf(", length %u: ", length);
109 * This is the top level routine of the printer. 'p' points to the
110 * Linux "cooked capture" header of the packet, 'h->ts' is the timestamp,
111 * 'h->len' is the length of the packet off the wire, and 'h->caplen'
112 * is the number of bytes actually captured.
114 u_int
115 sll_if_print(const struct pcap_pkthdr *h, const u_char *p)
117 u_int caplen = h->caplen;
118 u_int length = h->len;
119 register const struct sll_header *sllp;
120 u_short ether_type;
121 u_short extracted_ethertype;
123 if (caplen < SLL_HDR_LEN) {
125 * XXX - this "can't happen" because "pcap-linux.c" always
126 * adds this many bytes of header to every packet in a
127 * cooked socket capture.
129 printf("[|sll]");
130 return (caplen);
133 sllp = (const struct sll_header *)p;
135 if (eflag)
136 sll_print(sllp, length);
139 * Go past the cooked-mode header.
141 length -= SLL_HDR_LEN;
142 caplen -= SLL_HDR_LEN;
143 p += SLL_HDR_LEN;
145 ether_type = EXTRACT_16BITS(&sllp->sll_protocol);
147 recurse:
149 * Is it (gag) an 802.3 encapsulation, or some non-Ethernet
150 * packet type?
152 if (ether_type <= ETHERMTU) {
154 * Yes - what type is it?
156 switch (ether_type) {
158 case LINUX_SLL_P_802_3:
160 * Ethernet_802.3 IPX frame.
162 ipx_print(p, length);
163 break;
165 case LINUX_SLL_P_802_2:
167 * 802.2.
168 * Try to print the LLC-layer header & higher layers.
170 if (llc_print(p, length, caplen, NULL, NULL,
171 &extracted_ethertype) == 0)
172 goto unknown; /* unknown LLC type */
173 break;
175 default:
176 extracted_ethertype = 0;
177 /*FALLTHROUGH*/
179 unknown:
180 /* ether_type not known, print raw packet */
181 if (!eflag)
182 sll_print(sllp, length + SLL_HDR_LEN);
183 if (extracted_ethertype) {
184 printf("(LLC %s) ",
185 etherproto_string(htons(extracted_ethertype)));
187 if (!suppress_default_print)
188 default_print(p, caplen);
189 break;
191 } else if (ether_type == ETHERTYPE_8021Q) {
193 * Print VLAN information, and then go back and process
194 * the enclosed type field.
196 if (caplen < 4 || length < 4) {
197 printf("[|vlan]");
198 return (SLL_HDR_LEN);
200 if (eflag) {
201 u_int16_t tag = EXTRACT_16BITS(p);
203 printf("vlan %u, p %u%s, ",
204 tag & 0xfff,
205 tag >> 13,
206 (tag & 0x1000) ? ", CFI" : "");
209 ether_type = EXTRACT_16BITS(p + 2);
210 if (ether_type <= ETHERMTU)
211 ether_type = LINUX_SLL_P_802_2;
212 if (!qflag) {
213 (void)printf("ethertype %s, ",
214 tok2str(ethertype_values, "Unknown", ether_type));
216 p += 4;
217 length -= 4;
218 caplen -= 4;
219 goto recurse;
220 } else {
221 if (ethertype_print(gndo, ether_type, p, length, caplen) == 0) {
222 /* ether_type not known, print raw packet */
223 if (!eflag)
224 sll_print(sllp, length + SLL_HDR_LEN);
225 if (!suppress_default_print)
226 default_print(p, caplen);
230 return (SLL_HDR_LEN);