Merge branch 'master' of ssh://swildner@crater.dragonflybsd.org/repository/git/dragonfly
[dragonfly.git] / usr.sbin / adduser / adduser.sh
blob3a8a9d3d59a0bf1fea064a850e8808fcf3cc6317
1 #!/bin/sh
3 # Copyright (c) 2002-2004 Michael Telahun Makonnen. All rights reserved.
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
7 # are met:
8 # 1. Redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 # notice, this list of conditions and the following disclaimer in the
12 # documentation and/or other materials provided with the distribution.
14 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15 # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16 # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17 # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18 # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 # Email: Mike Makonnen <mtm@FreeBSD.Org>
27 # $FreeBSD: src/usr.sbin/adduser/adduser.sh,v 1.31 2007/10/20 00:45:31 mtm Exp $
28 # $DragonFly: src/usr.sbin/adduser/adduser.sh,v 1.4 2008/07/21 23:42:02 swildner Exp $
31 # err msg
32 # Display $msg on stderr, unless we're being quiet.
34 err() {
35 if [ -z "$quietflag" ]; then
36 echo 1>&2 ${THISCMD}: ERROR: $*
40 # info msg
41 # Display $msg on stdout, unless we're being quiet.
43 info() {
44 if [ -z "$quietflag" ]; then
45 echo ${THISCMD}: INFO: $*
49 # get_nextuid
50 # Output the value of $_uid if it is available for use. If it
51 # is not, output the value of the next higher uid that is available.
52 # If a uid is not specified, output the first available uid, as indicated
53 # by pw(8).
55 get_nextuid () {
56 _uid=$1
57 _nextuid=
59 if [ -z "$_uid" ]; then
60 _nextuid="`${PWCMD} usernext | cut -f1 -d:`"
61 else
62 while : ; do
63 ${PWCMD} usershow $_uid > /dev/null 2>&1
64 if [ ! "$?" -eq 0 ]; then
65 _nextuid=$_uid
66 break
68 _uid=$(($_uid + 1))
69 done
71 echo $_nextuid
74 # show_usage
75 # Display usage information for this utility.
77 show_usage() {
78 echo "usage: ${THISCMD} [options]"
79 echo " options may include:"
80 echo " -C save to the configuration file only"
81 echo " -D do not attempt to create the home directory"
82 echo " -E disable this account after creation"
83 echo " -G additional groups to add accounts to"
84 echo " -L login class of the user"
85 echo " -N do not read configuration file"
86 echo " -S a nonexistent shell is not an error"
87 echo " -d home directory"
88 echo " -f file from which input will be received"
89 echo " -g default login group"
90 echo " -h display this usage message"
91 echo " -k path to skeleton home directory"
92 echo " -m user welcome message file"
93 echo " -q absolute minimal user feedback"
94 echo " -s shell"
95 echo " -u uid to start at"
96 echo " -w password type: no, none, yes or random"
99 # valid_shells
100 # Outputs a list of valid shells from /etc/shells. Only the
101 # basename of the shell is output.
103 valid_shells() {
104 _prefix=
105 cat ${ETCSHELLS} |
106 while read _path _junk ; do
107 case $_path in
108 \#*|'')
111 echo -n "${_prefix}`basename $_path`"
112 _prefix=' '
114 esac
115 done
117 # /sbin/nologin is a special case
118 [ -x "${NOLOGIN_PATH}" ] && echo -n " ${NOLOGIN}"
121 # fullpath_from_shell shell
122 # Given $shell, which is either the full path to a shell or
123 # the basename component of a valid shell, get the
124 # full path to the shell from the /etc/shells file.
126 fullpath_from_shell() {
127 _shell=$1
128 [ -z "$_shell" ] && return 1
130 # /sbin/nologin is a special case; it needs to be handled
131 # before the cat | while loop, since a 'return' from within
132 # a subshell will not terminate the function's execution, and
133 # the path to the nologin shell might be printed out twice.
135 if [ "$_shell" = "${NOLOGIN}" -o \
136 "$_shell" = "${NOLOGIN_PATH}" ]; then
137 echo ${NOLOGIN_PATH}
138 return 0;
141 cat ${ETCSHELLS} |
142 while read _path _junk ; do
143 case "$_path" in
144 \#*|'')
147 if [ "$_path" = "$_shell" -o \
148 "`basename $_path`" = "$_shell" ]; then
149 echo $_path
150 return 0
153 esac
154 done
156 return 1
159 # shell_exists shell
160 # If the given shell is listed in ${ETCSHELLS} or it is
161 # the nologin shell this function will return 0.
162 # Otherwise, it will return 1. If shell is valid but
163 # the path is invalid or it is not executable it
164 # will emit an informational message saying so.
166 shell_exists()
168 _sh="$1"
169 _shellchk="${GREPCMD} '^$_sh$' ${ETCSHELLS} > /dev/null 2>&1"
171 if ! eval $_shellchk; then
172 # The nologin shell is not listed in /etc/shells.
173 if [ "$_sh" != "${NOLOGIN_PATH}" ]; then
174 err "Invalid shell ($_sh) for user $username."
175 return 1
178 ! [ -x "$_sh" ] &&
179 info "The shell ($_sh) does not exist or is not executable."
181 return 0
184 # save_config
185 # Save some variables to a configuration file.
186 # Note: not all script variables are saved, only those that
187 # it makes sense to save.
189 save_config() {
190 echo "# Configuration file for adduser(8)." > ${ADDUSERCONF}
191 echo "# NOTE: only *some* variables are saved." >> ${ADDUSERCONF}
192 echo "# Last Modified on `${DATECMD}`." >> ${ADDUSERCONF}
193 echo '' >> ${ADDUSERCONF}
194 echo "defaultLgroup=$ulogingroup" >> ${ADDUSERCONF}
195 echo "defaultclass=$uclass" >> ${ADDUSERCONF}
196 echo "defaultgroups=$ugroups" >> ${ADDUSERCONF}
197 echo "passwdtype=$passwdtype" >> ${ADDUSERCONF}
198 echo "homeprefix=$homeprefix" >> ${ADDUSERCONF}
199 echo "defaultshell=$ushell" >> ${ADDUSERCONF}
200 echo "udotdir=$udotdir" >> ${ADDUSERCONF}
201 echo "msgfile=$msgfile" >> ${ADDUSERCONF}
202 echo "disableflag=$disableflag" >> ${ADDUSERCONF}
203 echo "uidstart=$uidstart" >> ${ADDUSERCONF}
206 # add_user
207 # Add a user to the user database. If the user chose to send a welcome
208 # message or lock the account, do so.
210 add_user() {
212 # Is this a configuration run? If so, don't modify user database.
214 if [ -n "$configflag" ]; then
215 save_config
216 return
219 _uid=
220 _name=
221 _comment=
222 _gecos=
223 _home=
224 _group=
225 _grouplist=
226 _shell=
227 _class=
228 _dotdir=
229 _expire=
230 _pwexpire=
231 _passwd=
232 _upasswd=
233 _passwdmethod=
235 _name="-n '$username'"
236 [ -n "$uuid" ] && _uid='-u "$uuid"'
237 [ -n "$ulogingroup" ] && _group='-g "$ulogingroup"'
238 [ -n "$ugroups" ] && _grouplist='-G "$ugroups"'
239 [ -n "$ushell" ] && _shell='-s "$ushell"'
240 [ -n "$uclass" ] && _class='-L "$uclass"'
241 [ -n "$ugecos" ] && _comment='-c "$ugecos"'
242 [ -n "$udotdir" ] && _dotdir='-k "$udotdir"'
243 [ -n "$uexpire" ] && _expire='-e "$uexpire"'
244 [ -n "$upwexpire" ] && _pwexpire='-p "$upwexpire"'
245 if [ -z "$Dflag" -a -n "$uhome" ]; then
246 # The /nonexistent home directory is special. It
247 # means the user has no home directory.
248 if [ "$uhome" = "$NOHOME" ]; then
249 _home='-d "$uhome"'
250 else
251 _home='-m -d "$uhome"'
253 elif [ -n "$Dflag" -a -n "$uhome" ]; then
254 _home='-d "$uhome"'
256 case $passwdtype in
258 _passwdmethod="-w no"
259 _passwd="-h -"
261 yes)
262 # Note on processing the password: The outer double quotes
263 # make literal everything except ` and \ and $.
264 # The outer single quotes make literal ` and $.
265 # We can ensure the \ isn't treated specially by specifying
266 # the -r switch to the read command used to obtain the input.
268 _passwdmethod="-w yes"
269 _passwd="-h 0"
270 _upasswd='echo "$upass" |'
272 none)
273 _passwdmethod="-w none"
275 random)
276 _passwdmethod="-w random"
278 esac
280 _pwcmd="$_upasswd ${PWCMD} useradd $_uid $_name $_group $_grouplist $_comment"
281 _pwcmd="$_pwcmd $_shell $_class $_home $_dotdir $_passwdmethod $_passwd"
282 _pwcmd="$_pwcmd $_expire $_pwexpire"
284 if ! _output=`eval $_pwcmd` ; then
285 err "There was an error adding user ($username)."
286 return 1
287 else
288 info "Successfully added ($username) to the user database."
289 if [ "random" = "$passwdtype" ]; then
290 randompass="$_output"
291 info "Password for ($username) is: $randompass"
295 if [ -n "$disableflag" ]; then
296 if ${PWCMD} lock $username ; then
297 info "Account ($username) is locked."
298 else
299 info "Account ($username) could NOT be locked."
303 _line=
304 _owner=
305 _perms=
306 if [ -n "$msgflag" ]; then
307 [ -r "$msgfile" ] && {
308 # We're evaluating the contents of an external file.
309 # Let's not open ourselves up for attack. _perms will
310 # be empty if it's writeable only by the owner. _owner
311 # will *NOT* be empty if the file is owned by root.
313 _dir="`dirname $msgfile`"
314 _file="`basename $msgfile`"
315 _perms=`/usr/bin/find $_dir -name $_file -perm +07022 -prune`
316 _owner=`/usr/bin/find $_dir -name $_file -user 0 -prune`
317 if [ -z "$_owner" -o -n "$_perms" ]; then
318 err "The message file ($msgfile) may be writeable only by root."
319 return 1
321 cat "$msgfile" |
322 while read _line ; do
323 eval echo "$_line"
324 done | ${MAILCMD} -s"Welcome" ${username}
325 info "Sent welcome message to ($username)."
330 # get_user
331 # Reads username of the account from standard input or from a global
332 # variable containing an account line from a file. The username is
333 # required. If this is an interactive session it will prompt in
334 # a loop until a username is entered. If it is batch processing from
335 # a file it will output an error message and return to the caller.
337 get_user() {
338 _input=
340 # No need to take down user names if this is a configuration saving run.
341 [ -n "$configflag" ] && return
343 while : ; do
344 if [ -z "$fflag" ]; then
345 echo -n "Username: "
346 read _input
347 else
348 _input="`echo "$fileline" | cut -f1 -d:`"
351 # There *must* be a username, and it must not exist. If
352 # this is an interactive session give the user an
353 # opportunity to retry.
355 if [ -z "$_input" ]; then
356 err "You must enter a username!"
357 [ -z "$fflag" ] && continue
359 ${PWCMD} usershow $_input > /dev/null 2>&1
360 if [ "$?" -eq 0 ]; then
361 err "User exists!"
362 [ -z "$fflag" ] && continue
364 break
365 done
366 username="$_input"
369 # get_gecos
370 # Reads extra information about the user. Can be used both in interactive
371 # and batch (from file) mode.
373 get_gecos() {
374 _input=
376 # No need to take down additional user information for a configuration run.
377 [ -n "$configflag" ] && return
379 if [ -z "$fflag" ]; then
380 echo -n "Full name: "
381 read _input
382 else
383 _input="`echo "$fileline" | cut -f7 -d:`"
385 ugecos="$_input"
388 # get_shell
389 # Get the account's shell. Works in interactive and batch mode. It
390 # accepts either the base name of the shell or the full path.
391 # If an invalid shell is entered it will simply use the default shell.
393 get_shell() {
394 _input=
395 _fullpath=
396 ushell="$defaultshell"
398 # Make sure the current value of the shell is a valid one
399 if [ -z "$Sflag" ]; then
400 if ! shell_exists $ushell ; then
401 info "Using default shell ${defaultshell}."
402 ushell="$defaultshell"
406 if [ -z "$fflag" ]; then
407 echo -n "Shell ($shells) [`basename $ushell`]: "
408 read _input
409 else
410 _input="`echo "$fileline" | cut -f9 -d:`"
412 if [ -n "$_input" ]; then
413 if [ -n "$Sflag" ]; then
414 ushell="$_input"
415 else
416 _fullpath=`fullpath_from_shell $_input`
417 if [ -n "$_fullpath" ]; then
418 ushell="$_fullpath"
419 else
420 err "Invalid shell ($_input) for user $username."
421 info "Using default shell ${defaultshell}."
422 ushell="$defaultshell"
428 # get_homedir
429 # Reads the account's home directory. Used both with interactive input
430 # and batch input.
432 get_homedir() {
433 _input=
434 if [ -z "$fflag" ]; then
435 echo -n "Home directory [${homeprefix}/${username}]: "
436 read _input
437 else
438 _input="`echo "$fileline" | cut -f8 -d:`"
441 if [ -n "$_input" ]; then
442 uhome="$_input"
443 # if this is a configuration run, then user input is the home
444 # directory prefix. Otherwise it is understood to
445 # be $prefix/$user
447 [ -z "$configflag" ] && homeprefix="`dirname $uhome`" || homeprefix="$uhome"
448 else
449 uhome="${homeprefix}/${username}"
453 # get_uid
454 # Reads a numeric userid in an interactive or batch session. Automatically
455 # allocates one if it is not specified.
457 get_uid() {
458 uuid=${uidstart}
459 _input=
460 _prompt=
462 if [ -n "$uuid" ]; then
463 _prompt="Uid [$uuid]: "
464 else
465 _prompt="Uid (Leave empty for default): "
467 if [ -z "$fflag" ]; then
468 echo -n "$_prompt"
469 read _input
470 else
471 _input="`echo "$fileline" | cut -f2 -d:`"
474 [ -n "$_input" ] && uuid=$_input
475 uuid=`get_nextuid $uuid`
476 uidstart=$uuid
479 # get_class
480 # Reads login class of account. Can be used in interactive or batch mode.
482 get_class() {
483 uclass="$defaultclass"
484 _input=
485 _class=${uclass:-"default"}
487 if [ -z "$fflag" ]; then
488 echo -n "Login class [$_class]: "
489 read _input
490 else
491 _input="`echo "$fileline" | cut -f4 -d:`"
494 [ -n "$_input" ] && uclass="$_input"
497 # get_logingroup
498 # Reads user's login group. Can be used in both interactive and batch
499 # modes. The specified value can be a group name or its numeric id.
500 # This routine leaves the field blank if nothing is provided and
501 # a default login group has not been set. The pw(8) command
502 # will then provide a login group with the same name as the username.
504 get_logingroup() {
505 ulogingroup="$defaultLgroup"
506 _input=
508 if [ -z "$fflag" ]; then
509 echo -n "Login group [${ulogingroup:-$username}]: "
510 read _input
511 else
512 _input="`echo "$fileline" | cut -f3 -d:`"
515 # Pw(8) will use the username as login group if it's left empty
516 [ -n "$_input" ] && ulogingroup="$_input"
519 # get_groups
520 # Read additional groups for the user. It can be used in both interactive
521 # and batch modes.
523 get_groups() {
524 ugroups="$defaultgroups"
525 _input=
526 _group=${ulogingroup:-"${username}"}
528 if [ -z "$configflag" ]; then
529 [ -z "$fflag" ] && echo -n "Login group is $_group. Invite $username"
530 [ -z "$fflag" ] && echo -n " into other groups? [$ugroups]: "
531 else
532 [ -z "$fflag" ] && echo -n "Enter additional groups [$ugroups]: "
534 read _input
536 [ -n "$_input" ] && ugroups="$_input"
539 # get_expire_dates
540 # Read expiry information for the account and also for the password. This
541 # routine is used only from batch processing mode.
543 get_expire_dates() {
544 upwexpire="`echo "$fileline" | cut -f5 -d:`"
545 uexpire="`echo "$fileline" | cut -f6 -d:`"
548 # get_password
549 # Read the password in batch processing mode. The password field matters
550 # only when the password type is "yes" or "random". If the field is empty and the
551 # password type is "yes", then it assumes the account has an empty passsword
552 # and changes the password type accordingly. If the password type is "random"
553 # and the password field is NOT empty, then it assumes the account will NOT
554 # have a random password and set passwdtype to "yes."
556 get_password() {
557 # We may temporarily change a password type. Make sure it's changed
558 # back to whatever it was before we process the next account.
560 [ -n "$savedpwtype" ] && {
561 passwdtype=$savedpwtype
562 savedpwtype=
565 # There may be a ':' in the password
566 upass=${fileline#*:*:*:*:*:*:*:*:*:}
568 if [ -z "$upass" ]; then
569 case $passwdtype in
570 yes)
571 # if it's empty, assume an empty password
572 passwdtype=none
573 savedpwtype=yes
575 esac
576 else
577 case $passwdtype in
578 random)
579 passwdtype=yes
580 savedpwtype=random
582 esac
586 # input_from_file
587 # Reads a line of account information from standard input and
588 # adds it to the user database.
590 input_from_file() {
591 _field=
593 while read -r fileline ; do
594 case "$fileline" in
595 \#*|'')
598 get_user || continue
599 get_gecos
600 get_uid
601 get_logingroup
602 get_class
603 get_shell
604 get_homedir
605 get_password
606 get_expire_dates
607 ugroups="$defaultgroups"
609 add_user
611 esac
612 done
615 # input_interactive
616 # Prompts for user information interactively, and commits to
617 # the user database.
619 input_interactive() {
621 _disable=
622 _pass=
623 _passconfirm=
624 _random="no"
625 _emptypass="no"
626 _usepass="yes"
627 _logingroup_ok="no"
628 _groups_ok="no"
629 case $passwdtype in
630 none)
631 _emptypass="yes"
632 _usepass="yes"
635 _usepass="no"
637 random)
638 _random="yes"
640 esac
642 get_user
643 get_gecos
644 get_uid
646 # The case where group = user is handled elsewhere, so
647 # validate any other groups the user is invited to.
648 until [ "$_logingroup_ok" = yes ]; do
649 get_logingroup
650 _logingroup_ok=yes
651 if [ -n "$ulogingroup" -a "$username" != "$ulogingroup" ]; then
652 if ! ${PWCMD} show group $ulogingroup > /dev/null 2>&1; then
653 echo "Group $ulogingroup does not exist!"
654 _logingroup_ok=no
657 done
658 until [ "$_groups_ok" = yes ]; do
659 get_groups
660 _groups_ok=yes
661 for i in $ugroups; do
662 if [ "$username" != "$i" ]; then
663 if ! ${PWCMD} show group $i > /dev/null 2>&1; then
664 echo "Group $i does not exist!"
665 _groups_ok=no
668 done
669 done
671 get_class
672 get_shell
673 get_homedir
675 while : ; do
676 echo -n "Use password-based authentication? [$_usepass]: "
677 read _input
678 [ -z "$_input" ] && _input=$_usepass
679 case $_input in
680 [Nn][Oo]|[Nn])
681 passwdtype="no"
683 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
684 while : ; do
685 echo -n "Use an empty password? (yes/no) [$_emptypass]: "
686 read _input
687 [ -n "$_input" ] && _emptypass=$_input
688 case $_emptypass in
689 [Nn][Oo]|[Nn])
690 echo -n "Use a random password? (yes/no) [$_random]: "
691 read _input
692 [ -n "$_input" ] && _random="$_input"
693 case $_random in
694 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
695 passwdtype="random"
696 break
698 esac
699 passwdtype="yes"
700 [ -n "$configflag" ] && break
701 trap 'stty echo; exit' 0 1 2 3 15
702 stty -echo
703 echo -n "Enter password: "
704 read -r upass
705 echo''
706 echo -n "Enter password again: "
707 read -r _passconfirm
708 echo ''
709 stty echo
710 # if user entered a blank password
711 # explicitly ask again.
712 [ -z "$upass" -a -z "$_passconfirm" ] \
713 && continue
715 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
716 passwdtype="none"
717 break;
720 # invalid answer; repeat the loop
721 continue
723 esac
724 if [ "$upass" != "$_passconfirm" ]; then
725 echo "Passwords did not match!"
726 continue
728 break
729 done
732 # invalid answer; repeat loop
733 continue
735 esac
736 break;
737 done
738 _disable=${disableflag:-"no"}
739 while : ; do
740 echo -n "Lock out the account after creation? [$_disable]: "
741 read _input
742 [ -z "$_input" ] && _input=$_disable
743 case $_input in
744 [Nn][Oo]|[Nn])
745 disableflag=
747 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
748 disableflag=yes
751 # invalid answer; repeat loop
752 continue
754 esac
755 break
756 done
758 # Display the information we have so far and prompt to
759 # commit it.
761 _disable=${disableflag:-"no"}
762 [ -z "$configflag" ] && printf "%-10s : %s\n" Username $username
763 case $passwdtype in
764 yes)
765 _pass='*****'
768 _pass='<disabled>'
770 none)
771 _pass='<blank>'
773 random)
774 _pass='<random>'
776 esac
777 [ -z "$configflag" ] && printf "%-10s : %s\n" "Password" "$_pass"
778 [ -n "$configflag" ] && printf "%-10s : %s\n" "Pass Type" "$passwdtype"
779 [ -z "$configflag" ] && printf "%-10s : %s\n" "Full Name" "$ugecos"
780 [ -z "$configflag" ] && printf "%-10s : %s\n" "Uid" "$uuid"
781 printf "%-10s : %s\n" "Class" "$uclass"
782 printf "%-10s : %s %s\n" "Groups" "${ulogingroup:-$username}" "$ugroups"
783 printf "%-10s : %s\n" "Home" "$uhome"
784 printf "%-10s : %s\n" "Shell" "$ushell"
785 printf "%-10s : %s\n" "Locked" "$_disable"
786 while : ; do
787 echo -n "OK? (yes/no): "
788 read _input
789 case $_input in
790 [Nn][Oo]|[Nn])
791 return 1
793 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
794 add_user
797 continue
799 esac
800 break
801 done
802 return 0
805 #### END SUBROUTINE DEFINITION ####
807 THISCMD=`/usr/bin/basename $0`
808 DEFAULTSHELL=/bin/sh
809 ADDUSERCONF="${ADDUSERCONF:-/etc/adduser.conf}"
810 PWCMD="${PWCMD:-/usr/sbin/pw}"
811 MAILCMD="${MAILCMD:-mail}"
812 ETCSHELLS="${ETCSHELLS:-/etc/shells}"
813 NOHOME="/nonexistent"
814 NOLOGIN="nologin"
815 NOLOGIN_PATH="/sbin/nologin"
816 GREPCMD="/usr/bin/grep"
817 DATECMD="/bin/date"
819 # Set default values
821 username=
822 uuid=
823 uidstart=
824 ugecos=
825 ulogingroup=
826 uclass=
827 uhome=
828 upass=
829 ushell=
830 udotdir=/usr/share/skel
831 ugroups=
832 uexpire=
833 upwexpire=
834 shells="`valid_shells`"
835 passwdtype="yes"
836 msgfile=/etc/adduser.msg
837 msgflag=
838 quietflag=
839 configflag=
840 fflag=
841 infile=
842 disableflag=
843 Dflag=
844 Sflag=
845 readconfig="yes"
846 homeprefix="/home"
847 randompass=
848 fileline=
849 savedpwtype=
850 defaultclass=
851 defaultLgroup=
852 defaultgroups=
853 defaultshell="${DEFAULTSHELL}"
855 # Make sure the user running this program is root. This isn't a security
856 # measure as much as it is a useful method of reminding the user to
857 # 'su -' before he/she wastes time entering data that won't be saved.
859 procowner=${procowner:-`/usr/bin/id -u`}
860 if [ "$procowner" != "0" ]; then
861 err 'you must be the super-user (uid 0) to use this utility.'
862 exit 1
865 # Overide from our conf file
866 # Quickly go through the commandline line to see if we should read
867 # from our configuration file. The actual parsing of the commandline
868 # arguments happens after we read in our configuration file (commandline
869 # should override configuration file).
871 for _i in $* ; do
872 if [ "$_i" = "-N" ]; then
873 readconfig=
874 break;
876 done
877 if [ -n "$readconfig" ]; then
878 # On a long-lived system, the first time this script is run it
879 # will barf upon reading the configuration file for its perl predecessor.
880 if ( . ${ADDUSERCONF} > /dev/null 2>&1 ); then
881 [ -r ${ADDUSERCONF} ] && . ${ADDUSERCONF} > /dev/null 2>&1
885 # Process command-line options
887 for _switch ; do
888 case $_switch in
890 defaultclass="$2"
891 shift; shift
894 configflag=yes
895 shift
898 Dflag=yes
899 shift
902 disableflag=yes
903 shift
906 udotdir="$2"
907 shift; shift
910 [ "$2" != "-" ] && infile="$2"
911 fflag=yes
912 shift; shift
915 defaultLgroup="$2"
916 shift; shift
919 defaultgroups="$2"
920 shift; shift
923 show_usage
924 exit 0
927 homeprefix="$2"
928 shift; shift
931 case "$2" in
932 [Nn][Oo])
933 msgflag=
936 msgflag=yes
937 msgfile="$2"
939 esac
940 shift; shift
943 readconfig=
944 shift
947 case "$2" in
948 no|none|random|yes)
949 passwdtype=$2
952 show_usage
953 exit 1
955 esac
956 shift; shift
959 quietflag=yes
960 shift
963 defaultshell="`fullpath_from_shell $2`"
964 shift; shift
967 Sflag=yes
968 shift
971 uidstart=$2
972 shift; shift
974 esac
975 done
977 # If the -f switch was used, get input from a file. Otherwise,
978 # this is an interactive session.
980 if [ -n "$fflag" ]; then
981 if [ -z "$infile" ]; then
982 input_from_file
983 elif [ -n "$infile" ]; then
984 if [ -r "$infile" ]; then
985 input_from_file < $infile
986 else
987 err "File ($infile) is unreadable or does not exist."
990 else
991 input_interactive
992 while : ; do
993 if [ -z "$configflag" ]; then
994 echo -n "Add another user? (yes/no): "
995 else
996 echo -n "Re-edit the default configuration? (yes/no): "
998 read _input
999 case $_input in
1000 [Yy][Ee][Ss]|[Yy][Ee]|[Yy])
1001 uidstart=`get_nextuid $uidstart`
1002 input_interactive
1003 continue
1005 [Nn][Oo]|[Nn])
1006 echo "Goodbye!"
1009 continue
1011 esac
1012 break
1013 done