1 # This is loader.conf - a file full of useful variables that you can
2 # set to change the default load behavior of your system. You should
3 # not edit this file! Put any overrides into one of the
4 # loader_conf_files instead and you will be able to update these
5 # defaults later without spamming your local configuration information.
7 # All arguments must be in double quotes.
9 # $FreeBSD: src/sys/boot/forth/loader.conf,v 1.72 2003/07/01 01:03:32 brueffer Exp $
11 ##############################################################
12 ### Basic configuration options ############################
13 ##############################################################
15 default_kernel="kernel"
17 bootfile="kernel.BOOTP" # Kernel name (possibly absolute path)
21 ##############################################################
22 ### Splash screen configuration ############################
23 ##############################################################
25 splash_bmp_load="NO" # Set this to YES for bmp splash screen!
26 splash_pcx_load="NO" # Set this to YES for pcx splash screen!
27 bitmap_load="NO" # Set this to YES if you want splash screen!
28 bitmap_name="splash.bmp" # Set this to the name of the bmp or pcx file
29 bitmap_type="splash_image_data" # and place it on the module_path
32 ##############################################################
33 ### Loader settings ########################################
34 ##############################################################
36 #autoboot_delay="10" # Delay in seconds before autobooting
37 #fred_disable="NO" # Turn Fred's boot menu on and off
38 #fred_on_left="NO" # Show Fred on left side of menu
39 #loader_color="NO" # Set to YES for a color version of Fred
40 #console="vidconsole" # Set the current console
41 #currdev="disk1s1a" # Set the current device
42 local_modules="YES" # Use local modules and firmware
43 module_path=";modules" # Set the module search path
44 #prompt="OK" # Set the command prompt
45 #root_disk_unit="0" # Force the root disk unit number
46 #rootdev="disk1s1a" # Set the root filesystem
49 ##############################################################
50 ### Kernel settings ########################################
51 ##############################################################
53 # The following boot_ variables are enabled
54 # by setting them to any value.
55 #boot_askname="" # Prompt the user for the name of the root device
56 #boot_ddb="" # Instructs the kernel to start in the DDB debugger
57 #boot_gdb="" # Selects gdb-remote mode for the kernel debugger
58 #boot_single="" # Start system in single-user mode
59 #boot_verbose="" # Causes extra debugging information to be printed
60 #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak"
61 # Sets the list of init candidates
62 #dumpdev="ad0s1b" # Set device for crash dumps
65 ##############################################################
66 ### Kernel tunables ########################################
67 ##############################################################
69 #hw.physmem="1G" # Limit phyiscal memory. See loader(8)
70 #kern.dfldsiz="" # Set the initial data size limit
71 #kern.dflssiz="" # Set the initial stack size limit
72 #kern.hz="100" # Set the kernel interval timer rate
73 #kern.maxbcache="" # Set the max buffer cache KVA storage
74 #kern.maxdsiz="" # Set the max data size
75 #kern.maxfiles="" # Set the sys. wide open files limit
76 #kern.maxproc="" # Set the maximum # of processes
77 #kern.maxssiz="" # Set the max stack size
78 #kern.maxswzone="" # Set the max swmeta KVA storage
79 #kern.maxtsiz="" # Set the max text size
80 #kern.maxusers="32" # Set size of various static tables
81 #kern.nbuf="" # Set the number of buffer headers
82 #kern.ncallout="" # Set the maximum # of timer events
83 #kern.sgrowsiz="" # Set the amount to grow stack
84 #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
85 #kern.ipc.maxsockets="" # Set the maximum number of sockets available
86 #kern.ipc.nmbclusters="" # Set the number of mbuf clusters
87 #kern.ipc.nmbufs="" # Set the maximum number of mbufs
88 #kern.vm.kmem.size="" # Sets the size of kernel memory (bytes)
89 #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
90 #vfs.root.mountfrom="" # Specify root partition in a way the
91 # kernel understands. You can specify a semicolon
92 # separated device list which will be tried.
93 #debug.ktr.verbose="1" # Enable console dump of KTR events
94 #net.graph.maxalloc="128" # Maximum number of queue items to allocate
95 #net.graph.ngqfreemax="64" # Maximum number of free queue items to cache
98 ##############################################################
99 ### Filesystem and related modules #########################
100 ##############################################################
104 cd9660_load="NO" # ISO 9660 filesystem
105 ext2fs_load="NO" # ext2 filesystem
106 mfs_load="NO" # Memory filesystem
107 msdos_load="NO" # FAT-12/16/32
109 ntfs_load="NO" # NTFS
110 null_load="NO" # Null filesystem
111 procfs_load="NO" # Process filesystem
112 smbfs_load="NO" # SMB/CIFS
113 udf_load="NO" # UDF filesystem
117 ccd_load="NO" # Concatenated disk driver
118 vinum_load="NO" # Concatenated/mirror/raid driver
119 md_load="NO" # Memory disk driver (vnode/swap/malloc)
122 ##############################################################
123 ### Screen saver modules ###################################
124 ##############################################################
126 # This is best done in rc.conf
128 screensave_load="NO" # Set to YES to load a screensaver module
129 screensave_name="green_saver" # Set to the name of the screensaver module
132 ##############################################################
133 ### Emulation modules ######################################
134 ##############################################################
136 linux_load="NO" # Linux emulation
139 ##############################################################
140 ### Networking modules #####################################
141 ##############################################################
143 if_disc_load="NO" # Discard device
144 if_ef_load="NO" # pseudo-device providing support for multiple ethernet frame types
145 if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface
146 if_gif_load="NO" # generic tunnel interface
147 if_gre_load="NO" # encapsulating network device
148 if_ppp_load="NO" # Kernel ppp
149 if_sl_load="NO" # SLIP
150 if_stf_load="NO" # 6to4 tunnel interface
151 if_tap_load="NO" # Ethernet tunnel software network interface
152 if_tun_load="NO" # Tunnel driver (user process ppp)
153 if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
154 ipfw_load="NO" # Firewall
155 pf_load="NO" # OpenBSD's packet filter
158 ##############################################################
159 ### Networking drivers #####################################
160 ##############################################################
162 # NOTE! most of these will be built into a generic kernel, but some cannot
163 # be and those should be enabled here for PXE boots or the kernel may not
164 # be able to mount the root filesystem via NFS.
166 miibus_load="NO" # miibus support, needed for some drivers
167 if_ar_load="NO" # Digi SYNC/570i
168 if_ath_load="NO" # Atheros 802.11 wireless NICs
169 if_bce_load="NO" # Broadcom BCM5706/BCM5708 gigabit ethernet
170 if_bfe_load="NO" # Broadcom BCM4401 PCI ethernet
171 if_bge_load="NO" # Broadcom BCM570x PCI gigabit ethernet
172 if_dc_load="NO" # DEC/Intel 21143 and various workalikes
173 if_ed_load="NO" # National Semiconductor DS8390/WD83C690 ethernet
174 if_em_load="NO" # Intel(R) PRO/1000 gigabit ethernet
175 if_ep_load="NO" # 3Com Etherlink III (3c5x9)
176 if_et_load="NO" # Agere ET1310 10/100/Gigabit ethernet
177 if_fwe_load="NO" # Ethernet emulation driver for FireWire
178 if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
179 if_iwi_load="NO" # Intel(R) PRO/Wireless 2200BG/2915ABG MiniPCI
180 if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI gigabit ethernet
181 if_lnc_load="NO" # AMD Lance/PCnet Ethernet
182 if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet
183 if_my_load="NO" # Myson PCI fast ethernet
184 #if_ndis_load="NO" # NDIS miniport driver wrapper
185 if_nfe_load="NO" # NVIDIA nForce MCP 10/100/Gigabit ethernet
186 if_nge_load="NO" # National Semiconductor PCI gigabit ethernet
187 if_pcn_load="NO" # AMD PCnet PCI
188 if_ral_load="NO" # Ralink Technology 802.11 wireless NICs
189 if_re_load="NO" # RealTek 8139C+/8169/816xS/811xS/8101E
190 if_rl_load="NO" # RealTek 8129/8139
191 if_sbsh_load="NO" # Granch SBNI16 SHDSL modem
192 if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
193 if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
194 if_sk_load="NO" # SysKonnect SK-984x series PCI gigabit ethernet
195 if_sr_load="NO" # synchronous RISCom/N2 / WANic 400/405
196 if_ste_load="NO" # Sundance Technologies ST201 fast ethernet
197 if_stge_load="NO" # Sundance/Tamarack TC9021 gigabit ethernet
198 if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
199 if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
200 if_tx_load="NO" # SMC 83c17x fast ethernet
201 if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
202 if_vge_load="NO" # VIA VT6122 PCI gigabit ethernet
203 if_vr_load="NO" # VIA Rhine I and Rhine II
204 if_vx_load="NO" # 3Com 3C590 family
205 if_wb_load="NO" # Winbond W89C840F
206 if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
207 if_xe_load="NO" # Xircom CreditCard PCMCIA
208 if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
211 ##############################################################
212 ### Netgraph modules #######################################
213 ##############################################################
215 ng_UI_load="NO" # UI netgraph node type
216 ng_async_load="NO" # asynchronous framing netgraph node type
217 ng_bpf_load="NO" # Berkeley packet filter netgraph node type
218 ng_bridge_load="NO" # Ethernet bridging netgraph node type
219 ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
220 ng_echo_load="NO" # Netgraph echo node type
221 ng_ether_load="NO" # Ethernet netgraph node type
222 ng_frame_relay_load="NO" # frame relay netgraph node type
223 ng_hole_load="NO" # Netgraph discard node type
224 ng_iface_load="NO" # interface Netgraph node type
225 ng_ksocket_load="NO" # kernel socket netgraph node type
226 ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
227 ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and encryption netgraph node type
228 ng_one2many_load="NO" # packet multiplexing netgraph node type
229 ng_ppp_load="NO" # PPP protocol netgraph node type
230 ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
231 ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
232 ng_rfc1490_load="NO" # RFC 1490 netgraph node type
233 ng_socket_load="NO" # Netgraph socket node type
234 ng_tee_load="NO" # Netgraph ``tee'' node type
235 ng_tty_load="NO" # Netgraph node type that is also a line discipline
236 ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
239 ##############################################################
240 ### Sound modules ##########################################
241 ##############################################################
243 sound_load="NO" # Digital sound subsystem
244 snd_als4000_load="NO" # als4000
245 snd_atiixp_load="NO" # atiixp
246 snd_cmi_load="NO" # cmi
247 snd_cs4281_load="NO" # cs4281
248 snd_emu10k1_load="NO" # Creative Sound Blaster Live
249 snd_emu10kx_load="NO" # Creative Sound Blaster Live
250 snd_envy24_load="NO" # VIA Envy24
251 snd_envy24ht_load="NO" # VIA Envy24HT
252 snd_es137x_load="NO" # es137x
253 snd_fm801_load="NO" # fm801
254 snd_hda_load="NO" # hda
255 snd_hdspe_load="NO" # RME HDSPe
256 snd_ich_load="NO" # Intel ICH
257 snd_maestro_load="NO" # Maestro
258 snd_neomagic_load="NO" # Neomagic
259 snd_solo_load="NO" # Solo
260 snd_t4dwave_load="NO" # t4dwave
261 snd_via8233_load="NO" # via8233
262 snd_via82c686_load="NO" # via82c686
263 snd_vibes_load="NO" # S3 SonicVibes
264 snd_driver_load="NO" # All sound drivers
267 ##############################################################
268 ### USB modules ############################################
269 ##############################################################
271 usb_load="NO" # USB subsystem
272 ugen_load="NO" # USB generic device, if all else fails ...
273 ufm_load="NO" # Fm Radio
274 uhid_load="NO" # Human Interface Devices
275 ukbd_load="NO" # Keyboard
276 ulpt_load="NO" # Printer
277 ums_load="NO" # Mouse
278 umass_load="NO" # Mass Storage Devices
279 umodem_load="NO" # Modems
280 uscanner_load="NO" # Scanners
281 if_aue_load="NO" # ADMtek USB ethernet
282 if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
283 if_cue_load="NO" # CATC USB ethernet
284 if_kue_load="NO" # Kawasaki LSI USB ethernet
285 if_rue_load="NO" # RealTek RTL8150 USB fast ethernet
286 if_rum_load="NO" # Ralink RT2501USB/RT2601USB 802.11 wireless NICs
287 if_ural_load="NO" # Ralink RT2500USB 802.11 wireless NICs
288 snd_uaudio_load="NO" # USB audio
291 ##############################################################
292 ### Other modules ##########################################
293 ##############################################################
295 bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
296 ispfw_load="NO" # Qlogic ISP Firmware
297 agp_load="NO" # agp module
298 accf_data_load="NO" # Wait for data accept filter
299 accf_http_load="NO" # Wait for full HTTP request accept filter
300 random_load="NO" # Random device
301 atspeaker_load="NO" # AT speaker module
304 ##############################################################
305 ### ACPI settings ##########################################
306 ##############################################################
308 acpi_dsdt_load="NO" # DSDT Overriding
309 acpi_dsdt_type="acpi_dsdt" # Don't change this
310 acpi_dsdt_name="acpi_dsdt.aml" # Override DSDT in BIOS by this file
313 ##############################################################
314 ### Module loading syntax example ##########################
315 ##############################################################
317 #module_load="YES" # loads module "module"
318 #module_name="realname" # uses "realname" instead of "module"
319 #module_type="type" # passes "-t type" to load
320 #module_flags="flags" # passes "flags" to the module
321 #module_before="cmd" # executes "cmd" before loading the module
322 #module_after="cmd" # executes "cmd" after loading the module
323 #module_error="cmd" # executes "cmd" if load fails