If a neighbor solictation or neighbor advertisement isn't from the

[dragonfly.git] / sys / kern / vfs_journal.c

/*
 * Copyright (c) 2004-2006 The DragonFly Project.  All rights reserved.
 * 
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $DragonFly: src/sys/kern/vfs_journal.c,v 1.33 2007/05/09 00:53:34 dillon Exp $
 */
/*
 * The journaling protocol is intended to evolve into a two-way stream
 * whereby transaction IDs can be acknowledged by the journaling target
 * when the data has been committed to hard storage.  Both implicit and
 * explicit acknowledgement schemes will be supported, depending on the
 * sophistication of the journaling stream, plus resynchronization and
 * restart when a journaling stream is interrupted.  This information will
 * also be made available to journaling-aware filesystems to allow better
 * management of their own physical storage synchronization mechanisms as
 * well as to allow such filesystems to take direct advantage of the kernel's
 * journaling layer so they don't have to roll their own.
 *
 * In addition, the worker thread will have access to much larger 
 * spooling areas then the memory buffer is able to provide by e.g. 
 * reserving swap space, in order to absorb potentially long interruptions
 * of off-site journaling streams, and to prevent 'slow' off-site linkages
 * from radically slowing down local filesystem operations.  
 *
 * Because of the non-trivial algorithms the journaling system will be
 * required to support, use of a worker thread is mandatory.  Efficiencies
 * are maintained by utilitizing the memory FIFO to batch transactions when
 * possible, reducing the number of gratuitous thread switches and taking
 * advantage of cpu caches through the use of shorter batched code paths
 * rather then trying to do everything in the context of the process
 * originating the filesystem op.  In the future the memory FIFO can be
 * made per-cpu to remove BGL or other locking requirements.
 */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/queue.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/unistd.h>
#include <sys/vnode.h>
#include <sys/poll.h>
#include <sys/mountctl.h>
#include <sys/journal.h>
#include <sys/file.h>
#include <sys/proc.h>
#include <sys/msfbuf.h>
#include <sys/socket.h>
#include <sys/socketvar.h>

#include <machine/limits.h>

#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <vm/vnode_pager.h>

#include <sys/file2.h>
#include <sys/thread2.h>

static void journal_wthread(void *info);
static void journal_rthread(void *info);

static void *journal_reserve(struct journal *jo,
                        struct journal_rawrecbeg **rawpp,
                        int16_t streamid, int bytes);
static void *journal_extend(struct journal *jo,
                        struct journal_rawrecbeg **rawpp,
                        int truncbytes, int bytes, int *newstreamrecp);
static void journal_abort(struct journal *jo,
                        struct journal_rawrecbeg **rawpp);
static void journal_commit(struct journal *jo,
                        struct journal_rawrecbeg **rawpp,
                        int bytes, int closeout);


MALLOC_DEFINE(M_JOURNAL, "journal", "Journaling structures");
MALLOC_DEFINE(M_JFIFO, "journal-fifo", "Journal FIFO");

void
journal_create_threads(struct journal *jo)
{
        jo->flags &= ~(MC_JOURNAL_STOP_REQ | MC_JOURNAL_STOP_IMM);
        jo->flags |= MC_JOURNAL_WACTIVE;
        lwkt_create(journal_wthread, jo, NULL, &jo->wthread,
                        TDF_STOPREQ, -1, "journal w:%.*s", JIDMAX, jo->id);
        lwkt_setpri(&jo->wthread, TDPRI_KERN_DAEMON);
        lwkt_schedule(&jo->wthread);

        if (jo->flags & MC_JOURNAL_WANT_FULLDUPLEX) {
            jo->flags |= MC_JOURNAL_RACTIVE;
            lwkt_create(journal_rthread, jo, NULL, &jo->rthread,
                        TDF_STOPREQ, -1, "journal r:%.*s", JIDMAX, jo->id);
            lwkt_setpri(&jo->rthread, TDPRI_KERN_DAEMON);
            lwkt_schedule(&jo->rthread);
        }
}

void
journal_destroy_threads(struct journal *jo, int flags)
{
    int wcount;

    jo->flags |= MC_JOURNAL_STOP_REQ | (flags & MC_JOURNAL_STOP_IMM);
    wakeup(&jo->fifo);
    wcount = 0;
    while (jo->flags & (MC_JOURNAL_WACTIVE | MC_JOURNAL_RACTIVE)) {
        tsleep(jo, 0, "jwait", hz);
        if (++wcount % 10 == 0) {
            kprintf("Warning: journal %s waiting for descriptors to close\n",
                jo->id);
        }
    }

    /*
     * XXX SMP - threads should move to cpu requesting the restart or
     * termination before finishing up to properly interlock.
     */
    tsleep(jo, 0, "jwait", hz);
    lwkt_free_thread(&jo->wthread);
    if (jo->flags & MC_JOURNAL_WANT_FULLDUPLEX)
        lwkt_free_thread(&jo->rthread);
}

/*
 * The per-journal worker thread is responsible for writing out the
 * journal's FIFO to the target stream.
 */
static void
journal_wthread(void *info)
{
    struct journal *jo = info;
    struct journal_rawrecbeg *rawp;
    int bytes;
    int error;
    int avail;
    int res;

    for (;;) {
        /*
         * Calculate the number of bytes available to write.  This buffer
         * area may contain reserved records so we can't just write it out
         * without further checks.
         */
        bytes = jo->fifo.windex - jo->fifo.rindex;

        /*
         * sleep if no bytes are available or if an incomplete record is
         * encountered (it needs to be filled in before we can write it
         * out), and skip any pad records that we encounter.
         */
        if (bytes == 0) {
            if (jo->flags & MC_JOURNAL_STOP_REQ)
                break;
            tsleep(&jo->fifo, 0, "jfifo", hz);
            continue;
        }

        /*
         * Sleep if we can not go any further due to hitting an incomplete
         * record.  This case should occur rarely but may have to be better
         * optimized XXX.
         */
        rawp = (void *)(jo->fifo.membase + (jo->fifo.rindex & jo->fifo.mask));
        if (rawp->begmagic == JREC_INCOMPLETEMAGIC) {
            tsleep(&jo->fifo, 0, "jpad", hz);
            continue;
        }

        /*
         * Skip any pad records.  We do not write out pad records if we can
         * help it. 
         */
        if (rawp->streamid == JREC_STREAMID_PAD) {
            if ((jo->flags & MC_JOURNAL_WANT_FULLDUPLEX) == 0) {
                if (jo->fifo.rindex == jo->fifo.xindex) {
                    jo->fifo.xindex += (rawp->recsize + 15) & ~15;
                    jo->total_acked += (rawp->recsize + 15) & ~15;
                }
            }
            jo->fifo.rindex += (rawp->recsize + 15) & ~15;
            jo->total_acked += bytes;
            KKASSERT(jo->fifo.windex - jo->fifo.rindex >= 0);
            continue;
        }

        /*
         * 'bytes' is the amount of data that can potentially be written out.  
         * Calculate 'res', the amount of data that can actually be written
         * out.  res is bounded either by hitting the end of the physical
         * memory buffer or by hitting an incomplete record.  Incomplete
         * records often occur due to the way the space reservation model
         * works.
         */
        res = 0;
        avail = jo->fifo.size - (jo->fifo.rindex & jo->fifo.mask);
        while (res < bytes && rawp->begmagic == JREC_BEGMAGIC) {
            res += (rawp->recsize + 15) & ~15;
            if (res >= avail) {
                KKASSERT(res == avail);
                break;
            }
            rawp = (void *)((char *)rawp + ((rawp->recsize + 15) & ~15));
        }

        /*
         * Issue the write and deal with any errors or other conditions.
         * For now assume blocking I/O.  Since we are record-aware the
         * code cannot yet handle partial writes.
         *
         * We bump rindex prior to issuing the write to avoid racing
         * the acknowledgement coming back (which could prevent the ack
         * from bumping xindex).  Restarts are always based on xindex so
         * we do not try to undo the rindex if an error occurs.
         *
         * XXX EWOULDBLOCK/NBIO
         * XXX notification on failure
         * XXX permanent verses temporary failures
         * XXX two-way acknowledgement stream in the return direction / xindex
         */
        bytes = res;
        jo->fifo.rindex += bytes;
        error = fp_write(jo->fp, 
                        jo->fifo.membase + ((jo->fifo.rindex - bytes) & jo->fifo.mask),
                        bytes, &res, UIO_SYSSPACE);
        if (error) {
            kprintf("journal_thread(%s) write, error %d\n", jo->id, error);
            /* XXX */
        } else {
            KKASSERT(res == bytes);
        }

        /*
         * Advance rindex.  If the journal stream is not full duplex we also
         * advance xindex, otherwise the rjournal thread is responsible for
         * advancing xindex.
         */
        if ((jo->flags & MC_JOURNAL_WANT_FULLDUPLEX) == 0) {
            jo->fifo.xindex += bytes;
            jo->total_acked += bytes;
        }
        KKASSERT(jo->fifo.windex - jo->fifo.rindex >= 0);
        if ((jo->flags & MC_JOURNAL_WANT_FULLDUPLEX) == 0) {
            if (jo->flags & MC_JOURNAL_WWAIT) {
                jo->flags &= ~MC_JOURNAL_WWAIT; /* XXX hysteresis */
                wakeup(&jo->fifo.windex);
            }
        }
    }
    fp_shutdown(jo->fp, SHUT_WR);
    jo->flags &= ~MC_JOURNAL_WACTIVE;
    wakeup(jo);
    wakeup(&jo->fifo.windex);
}

/*
 * A second per-journal worker thread is created for two-way journaling
 * streams to deal with the return acknowledgement stream.
 */
static void
journal_rthread(void *info)
{
    struct journal_rawrecbeg *rawp;
    struct journal_ackrecord ack;
    struct journal *jo = info;
    int64_t transid;
    int error;
    int count;
    int bytes;

    transid = 0;
    error = 0;

    for (;;) {
        /*
         * We have been asked to stop
         */
        if (jo->flags & MC_JOURNAL_STOP_REQ)
                break;

        /*
         * If we have no active transaction id, get one from the return
         * stream.
         */
        if (transid == 0) {
            error = fp_read(jo->fp, &ack, sizeof(ack), &count, 
                            1, UIO_SYSSPACE);
#if 0
            kprintf("fp_read ack error %d count %d\n", error, count);
#endif
            if (error || count != sizeof(ack))
                break;
            if (error) {
                kprintf("read error %d on receive stream\n", error);
                break;
            }
            if (ack.rbeg.begmagic != JREC_BEGMAGIC ||
                ack.rend.endmagic != JREC_ENDMAGIC
            ) {
                kprintf("bad begmagic or endmagic on receive stream\n");
                break;
            }
            transid = ack.rbeg.transid;
        }

        /*
         * Calculate the number of unacknowledged bytes.  If there are no
         * unacknowledged bytes then unsent data was acknowledged, report,
         * sleep a bit, and loop in that case.  This should not happen 
         * normally.  The ack record is thrown away.
         */
        bytes = jo->fifo.rindex - jo->fifo.xindex;

        if (bytes == 0) {
            kprintf("warning: unsent data acknowledged transid %08llx\n", transid);
            tsleep(&jo->fifo.xindex, 0, "jrseq", hz);
            transid = 0;
            continue;
        }

        /*
         * Since rindex has advanced, the record pointed to by xindex
         * must be a valid record.
         */
        rawp = (void *)(jo->fifo.membase + (jo->fifo.xindex & jo->fifo.mask));
        KKASSERT(rawp->begmagic == JREC_BEGMAGIC);
        KKASSERT(rawp->recsize <= bytes);

        /*
         * The target can acknowledge several records at once.
         */
        if (rawp->transid < transid) {
#if 1
            kprintf("ackskip %08llx/%08llx\n", rawp->transid, transid);
#endif
            jo->fifo.xindex += (rawp->recsize + 15) & ~15;
            jo->total_acked += (rawp->recsize + 15) & ~15;
            if (jo->flags & MC_JOURNAL_WWAIT) {
                jo->flags &= ~MC_JOURNAL_WWAIT; /* XXX hysteresis */
                wakeup(&jo->fifo.windex);
            }
            continue;
        }
        if (rawp->transid == transid) {
#if 1
            kprintf("ackskip %08llx/%08llx\n", rawp->transid, transid);
#endif
            jo->fifo.xindex += (rawp->recsize + 15) & ~15;
            jo->total_acked += (rawp->recsize + 15) & ~15;
            if (jo->flags & MC_JOURNAL_WWAIT) {
                jo->flags &= ~MC_JOURNAL_WWAIT; /* XXX hysteresis */
                wakeup(&jo->fifo.windex);
            }
            transid = 0;
            continue;
        }
        kprintf("warning: unsent data(2) acknowledged transid %08llx\n", transid);
        transid = 0;
    }
    jo->flags &= ~MC_JOURNAL_RACTIVE;
    wakeup(jo);
    wakeup(&jo->fifo.windex);
}

/*
 * This builds a pad record which the journaling thread will skip over.  Pad
 * records are required when we are unable to reserve sufficient stream space
 * due to insufficient space at the end of the physical memory fifo.
 *
 * Even though the record is not transmitted, a normal transid must be 
 * assigned to it so link recovery operations after a failure work properly.
 */
static
void
journal_build_pad(struct journal_rawrecbeg *rawp, int recsize, int64_t transid)
{
    struct journal_rawrecend *rendp;
    
    KKASSERT((recsize & 15) == 0 && recsize >= 16);

    rawp->streamid = JREC_STREAMID_PAD;
    rawp->recsize = recsize;    /* must be 16-byte aligned */
    rawp->transid = transid;
    /*
     * WARNING, rendp may overlap rawp->transid.  This is necessary to
     * allow PAD records to fit in 16 bytes.  Use cpu_ccfence() to
     * hopefully cause the compiler to not make any assumptions.
     */
    rendp = (void *)((char *)rawp + rawp->recsize - sizeof(*rendp));
    rendp->endmagic = JREC_ENDMAGIC;
    rendp->check = 0;
    rendp->recsize = rawp->recsize;

    /*
     * Set the begin magic last.  This is what will allow the journal
     * thread to write the record out.  Use a store fence to prevent
     * compiler and cpu reordering of the writes.
     */
    cpu_sfence();
    rawp->begmagic = JREC_BEGMAGIC;
}

/*
 * Wake up the worker thread if the FIFO is more then half full or if
 * someone is waiting for space to be freed up.  Otherwise let the 
 * heartbeat deal with it.  Being able to avoid waking up the worker
 * is the key to the journal's cpu performance.
 */
static __inline
void
journal_commit_wakeup(struct journal *jo)
{
    int avail;

    avail = jo->fifo.size - (jo->fifo.windex - jo->fifo.xindex);
    KKASSERT(avail >= 0);
    if ((avail < (jo->fifo.size >> 1)) || (jo->flags & MC_JOURNAL_WWAIT))
        wakeup(&jo->fifo);
}

/*
 * Create a new BEGIN stream record with the specified streamid and the
 * specified amount of payload space.  *rawpp will be set to point to the
 * base of the new stream record and a pointer to the base of the payload
 * space will be returned.  *rawpp does not need to be pre-NULLd prior to
 * making this call.  The raw record header will be partially initialized.
 *
 * A stream can be extended, aborted, or committed by other API calls
 * below.  This may result in a sequence of potentially disconnected
 * stream records to be output to the journaling target.  The first record
 * (the one created by this function) will be marked JREC_STREAMCTL_BEGIN,
 * while the last record on commit or abort will be marked JREC_STREAMCTL_END
 * (and possibly also JREC_STREAMCTL_ABORTED).  The last record could wind
 * up being the same as the first, in which case the bits are all set in
 * the first record.
 *
 * The stream record is created in an incomplete state by setting the begin
 * magic to JREC_INCOMPLETEMAGIC.  This prevents the worker thread from
 * flushing the fifo past our record until we have finished populating it.
 * Other threads can reserve and operate on their own space without stalling
 * but the stream output will stall until we have completed operations.  The
 * memory FIFO is intended to be large enough to absorb such situations
 * without stalling out other threads.
 */
static
void *
journal_reserve(struct journal *jo, struct journal_rawrecbeg **rawpp,
                int16_t streamid, int bytes)
{
    struct journal_rawrecbeg *rawp;
    int avail;
    int availtoend;
    int req;

    /*
     * Add header and trailer overheads to the passed payload.  Note that
     * the passed payload size need not be aligned in any way.
     */
    bytes += sizeof(struct journal_rawrecbeg);
    bytes += sizeof(struct journal_rawrecend);

    for (;;) {
        /*
         * First, check boundary conditions.  If the request would wrap around
         * we have to skip past the ending block and return to the beginning
         * of the FIFO's buffer.  Calculate 'req' which is the actual number
         * of bytes being reserved, including wrap-around dead space.
         *
         * Neither 'bytes' or 'req' are aligned.
         *
         * Note that availtoend is not truncated to avail and so cannot be
         * used to determine whether the reservation is possible by itself.
         * Also, since all fifo ops are 16-byte aligned, we can check
         * the size before calculating the aligned size.
         */
        availtoend = jo->fifo.size - (jo->fifo.windex & jo->fifo.mask);
        KKASSERT((availtoend & 15) == 0);
        if (bytes > availtoend) 
            req = bytes + availtoend;   /* add pad to end */
        else
            req = bytes;

        /*
         * Next calculate the total available space and see if it is
         * sufficient.  We cannot overwrite previously buffered data
         * past xindex because otherwise we would not be able to restart
         * a broken link at the target's last point of commit.
         */
        avail = jo->fifo.size - (jo->fifo.windex - jo->fifo.xindex);
        KKASSERT(avail >= 0 && (avail & 15) == 0);

        if (avail < req) {
            /* XXX MC_JOURNAL_STOP_IMM */
            jo->flags |= MC_JOURNAL_WWAIT;
            ++jo->fifostalls;
            tsleep(&jo->fifo.windex, 0, "jwrite", 0);
            continue;
        }

        /*
         * Create a pad record for any dead space and create an incomplete
         * record for the live space, then return a pointer to the
         * contiguous buffer space that was requested.
         *
         * NOTE: The worker thread will not flush past an incomplete
         * record, so the reserved space can be filled in at-will.  The
         * journaling code must also be aware the reserved sections occuring
         * after this one will also not be written out even if completed
         * until this one is completed.
         *
         * The transaction id must accomodate real and potential pad creation.
         */
        rawp = (void *)(jo->fifo.membase + (jo->fifo.windex & jo->fifo.mask));
        if (req != bytes) {
            journal_build_pad(rawp, availtoend, jo->transid);
            ++jo->transid;
            rawp = (void *)jo->fifo.membase;
        }
        rawp->begmagic = JREC_INCOMPLETEMAGIC;  /* updated by abort/commit */
        rawp->recsize = bytes;                  /* (unaligned size) */
        rawp->streamid = streamid | JREC_STREAMCTL_BEGIN;
        rawp->transid = jo->transid;
        jo->transid += 2;

        /*
         * Issue a memory barrier to guarentee that the record data has been
         * properly initialized before we advance the write index and return
         * a pointer to the reserved record.  Otherwise the worker thread
         * could accidently run past us.
         *
         * Note that stream records are always 16-byte aligned.
         */
        cpu_sfence();
        jo->fifo.windex += (req + 15) & ~15;
        *rawpp = rawp;
        return(rawp + 1);
    }
    /* not reached */
    *rawpp = NULL;
    return(NULL);
}

/*
 * Attempt to extend the stream record by <bytes> worth of payload space.
 *
 * If it is possible to extend the existing stream record no truncation
 * occurs and the record is extended as specified.  A pointer to the 
 * truncation offset within the payload space is returned.
 *
 * If it is not possible to do this the existing stream record is truncated
 * and committed, and a new stream record of size <bytes> is created.  A
 * pointer to the base of the new stream record's payload space is returned.
 *
 * *rawpp is set to the new reservation in the case of a new record but
 * the caller cannot depend on a comparison with the old rawp to determine if
 * this case occurs because we could end up using the same memory FIFO
 * offset for the new stream record.  Use *newstreamrecp instead.
 */
static void *
journal_extend(struct journal *jo, struct journal_rawrecbeg **rawpp, 
                int truncbytes, int bytes, int *newstreamrecp)
{
    struct journal_rawrecbeg *rawp;
    int16_t streamid;
    int availtoend;
    int avail;
    int osize;
    int nsize;
    int wbase;
    void *rptr;

    *newstreamrecp = 0;
    rawp = *rawpp;
    osize = (rawp->recsize + 15) & ~15;
    nsize = (rawp->recsize + bytes + 15) & ~15;
    wbase = (char *)rawp - jo->fifo.membase;

    /*
     * If the aligned record size does not change we can trivially adjust
     * the record size.
     */
    if (nsize == osize) {
        rawp->recsize += bytes;
        return((char *)(rawp + 1) + truncbytes);
    }

    /*
     * If the fifo's write index hasn't been modified since we made the
     * reservation and we do not hit any boundary conditions, we can 
     * trivially make the record smaller or larger.
     */
    if ((jo->fifo.windex & jo->fifo.mask) == wbase + osize) {
        availtoend = jo->fifo.size - wbase;
        avail = jo->fifo.size - (jo->fifo.windex - jo->fifo.xindex) + osize;
        KKASSERT((availtoend & 15) == 0);
        KKASSERT((avail & 15) == 0);
        if (nsize <= avail && nsize <= availtoend) {
            jo->fifo.windex += nsize - osize;
            rawp->recsize += bytes;
            return((char *)(rawp + 1) + truncbytes);
        }
    }

    /*
     * It was not possible to extend the buffer.  Commit the current
     * buffer and create a new one.  We manually clear the BEGIN mark that
     * journal_reserve() creates (because this is a continuing record, not
     * the start of a new stream).
     */
    streamid = rawp->streamid & JREC_STREAMID_MASK;
    journal_commit(jo, rawpp, truncbytes, 0);
    rptr = journal_reserve(jo, rawpp, streamid, bytes);
    rawp = *rawpp;
    rawp->streamid &= ~JREC_STREAMCTL_BEGIN;
    *newstreamrecp = 1;
    return(rptr);
}

/*
 * Abort a journal record.  If the transaction record represents a stream
 * BEGIN and we can reverse the fifo's write index we can simply reverse
 * index the entire record, as if it were never reserved in the first place.
 *
 * Otherwise we set the JREC_STREAMCTL_ABORTED bit and commit the record
 * with the payload truncated to 0 bytes.
 */
static void
journal_abort(struct journal *jo, struct journal_rawrecbeg **rawpp)
{
    struct journal_rawrecbeg *rawp;
    int osize;

    rawp = *rawpp;
    osize = (rawp->recsize + 15) & ~15;

    if ((rawp->streamid & JREC_STREAMCTL_BEGIN) &&
        (jo->fifo.windex & jo->fifo.mask) == 
         (char *)rawp - jo->fifo.membase + osize)
    {
        jo->fifo.windex -= osize;
        *rawpp = NULL;
    } else {
        rawp->streamid |= JREC_STREAMCTL_ABORTED;
        journal_commit(jo, rawpp, 0, 1);
    }
}

/*
 * Commit a journal record and potentially truncate it to the specified
 * number of payload bytes.  If you do not want to truncate the record,
 * simply pass -1 for the bytes parameter.  Do not pass rawp->recsize, that
 * field includes header and trailer and will not be correct.  Note that
 * passing 0 will truncate the entire data payload of the record.
 *
 * The logical stream is terminated by this function.
 *
 * If truncation occurs, and it is not possible to physically optimize the
 * memory FIFO due to other threads having reserved space after ours,
 * the remaining reserved space will be covered by a pad record.
 */
static void
journal_commit(struct journal *jo, struct journal_rawrecbeg **rawpp,
                int bytes, int closeout)
{
    struct journal_rawrecbeg *rawp;
    struct journal_rawrecend *rendp;
    int osize;
    int nsize;

    rawp = *rawpp;
    *rawpp = NULL;

    KKASSERT((char *)rawp >= jo->fifo.membase &&
             (char *)rawp + rawp->recsize <= jo->fifo.membase + jo->fifo.size);
    KKASSERT(((intptr_t)rawp & 15) == 0);

    /*
     * Truncate the record if necessary.  If the FIFO write index as still
     * at the end of our record we can optimally backindex it.  Otherwise
     * we have to insert a pad record to cover the dead space.
     *
     * We calculate osize which is the 16-byte-aligned original recsize.
     * We calculate nsize which is the 16-byte-aligned new recsize.
     *
     * Due to alignment issues or in case the passed truncation bytes is
     * the same as the original payload, nsize may be equal to osize even
     * if the committed bytes is less then the originally reserved bytes.
     */
    if (bytes >= 0) {
        KKASSERT(bytes >= 0 && bytes <= rawp->recsize - sizeof(struct journal_rawrecbeg) - sizeof(struct journal_rawrecend));
        osize = (rawp->recsize + 15) & ~15;
        rawp->recsize = bytes + sizeof(struct journal_rawrecbeg) +
                        sizeof(struct journal_rawrecend);
        nsize = (rawp->recsize + 15) & ~15;
        KKASSERT(nsize <= osize);
        if (osize == nsize) {
            /* do nothing */
        } else if ((jo->fifo.windex & jo->fifo.mask) == (char *)rawp - jo->fifo.membase + osize) {
            /* we are able to backindex the fifo */
            jo->fifo.windex -= osize - nsize;
        } else {
            /* we cannot backindex the fifo, emplace a pad in the dead space */
            journal_build_pad((void *)((char *)rawp + nsize), osize - nsize,
                                rawp->transid + 1);
        }
    }

    /*
     * Fill in the trailer.  Note that unlike pad records, the trailer will
     * never overlap the header.
     */
    rendp = (void *)((char *)rawp + 
            ((rawp->recsize + 15) & ~15) - sizeof(*rendp));
    rendp->endmagic = JREC_ENDMAGIC;
    rendp->recsize = rawp->recsize;
    rendp->check = 0;           /* XXX check word, disabled for now */

    /*
     * Fill in begmagic last.  This will allow the worker thread to proceed.
     * Use a memory barrier to guarentee write ordering.  Mark the stream
     * as terminated if closeout is set.  This is the typical case.
     */
    if (closeout)
        rawp->streamid |= JREC_STREAMCTL_END;
    cpu_sfence();               /* memory and compiler barrier */
    rawp->begmagic = JREC_BEGMAGIC;

    journal_commit_wakeup(jo);
}

/************************************************************************
 *                      TRANSACTION SUPPORT ROUTINES                    *
 ************************************************************************
 *
 * JRECORD_*() - routines to create subrecord transactions and embed them
 *               in the logical streams managed by the journal_*() routines.
 */

/*
 * Initialize the passed jrecord structure and start a new stream transaction
 * by reserving an initial build space in the journal's memory FIFO.
 */
void
jrecord_init(struct journal *jo, struct jrecord *jrec, int16_t streamid)
{
    bzero(jrec, sizeof(*jrec));
    jrec->jo = jo;
    jrec->streamid = streamid;
    jrec->stream_residual = JREC_DEFAULTSIZE;
    jrec->stream_reserved = jrec->stream_residual;
    jrec->stream_ptr = 
        journal_reserve(jo, &jrec->rawp, streamid, jrec->stream_reserved);
}

/*
 * Push a recursive record type.  All pushes should have matching pops.
 * The old parent is returned and the newly pushed record becomes the
 * new parent.  Note that the old parent's pointer may already be invalid
 * or may become invalid if jrecord_write() had to build a new stream
 * record, so the caller should not mess with the returned pointer in
 * any way other then to save it.
 */
struct journal_subrecord *
jrecord_push(struct jrecord *jrec, int16_t rectype)
{
    struct journal_subrecord *save;

    save = jrec->parent;
    jrec->parent = jrecord_write(jrec, rectype|JMASK_NESTED, 0);
    jrec->last = NULL;
    KKASSERT(jrec->parent != NULL);
    ++jrec->pushcount;
    ++jrec->pushptrgood;        /* cleared on flush */
    return(save);
}

/*
 * Pop a previously pushed sub-transaction.  We must set JMASK_LAST
 * on the last record written within the subtransaction.  If the last 
 * record written is not accessible or if the subtransaction is empty,
 * we must write out a pad record with JMASK_LAST set before popping.
 *
 * When popping a subtransaction the parent record's recsize field
 * will be properly set.  If the parent pointer is no longer valid
 * (which can occur if the data has already been flushed out to the
 * stream), the protocol spec allows us to leave it 0.
 *
 * The saved parent pointer which we restore may or may not be valid,
 * and if not valid may or may not be NULL, depending on the value
 * of pushptrgood.
 */
void
jrecord_pop(struct jrecord *jrec, struct journal_subrecord *save)
{
    struct journal_subrecord *last;

    KKASSERT(jrec->pushcount > 0);
    KKASSERT(jrec->residual == 0);

    /*
     * Set JMASK_LAST on the last record we wrote at the current
     * level.  If last is NULL we either no longer have access to the
     * record or the subtransaction was empty and we must write out a pad
     * record.
     */
    if ((last = jrec->last) == NULL) {
        jrecord_write(jrec, JLEAF_PAD|JMASK_LAST, 0);
        last = jrec->last;      /* reload after possible flush */
    } else {
        last->rectype |= JMASK_LAST;
    }

    /*
     * pushptrgood tells us how many levels of parent record pointers
     * are valid.  The jrec only stores the current parent record pointer
     * (and it is only valid if pushptrgood != 0).  The higher level parent
     * record pointers are saved by the routines calling jrecord_push() and
     * jrecord_pop().  These pointers may become stale and we determine
     * that fact by tracking the count of valid parent pointers with 
     * pushptrgood.  Pointers become invalid when their related stream
     * record gets pushed out.
     *
     * If no pointer is available (the data has already been pushed out),
     * then no fixup of e.g. the length field is possible for non-leaf
     * nodes.  The protocol allows for this situation by placing a larger
     * burden on the program scanning the stream on the other end.
     *
     * [parentA]
     *    [node X]
     *    [parentB]
     *       [node Y]
     *       [node Z]
     *    (pop B)       see NOTE B
     * (pop A)          see NOTE A
     *
     * NOTE B:  This pop sets LAST in node Z if the node is still accessible,
     *          else a PAD record is appended and LAST is set in that.
     *
     *          This pop sets the record size in parentB if parentB is still
     *          accessible, else the record size is left 0 (the scanner must
     *          deal with that).
     *
     *          This pop sets the new 'last' record to parentB, the pointer
     *          to which may or may not still be accessible.
     *
     * NOTE A:  This pop sets LAST in parentB if the node is still accessible,
     *          else a PAD record is appended and LAST is set in that.
     *
     *          This pop sets the record size in parentA if parentA is still
     *          accessible, else the record size is left 0 (the scanner must
     *          deal with that).
     *
     *          This pop sets the new 'last' record to parentA, the pointer
     *          to which may or may not still be accessible.
     *
     * Also note that the last record in the stream transaction, which in
     * the above example is parentA, does not currently have the LAST bit
     * set.
     *
     * The current parent becomes the last record relative to the
     * saved parent passed into us.  It's validity is based on 
     * whether pushptrgood is non-zero prior to decrementing.  The saved
     * parent becomes the new parent, and its validity is based on whether
     * pushptrgood is non-zero after decrementing.
     *
     * The old jrec->parent may be NULL if it is no longer accessible.
     * If pushptrgood is non-zero, however, it is guarenteed to not
     * be NULL (since no flush occured).
     */
    jrec->last = jrec->parent;
    --jrec->pushcount;
    if (jrec->pushptrgood) {
        KKASSERT(jrec->last != NULL && last != NULL);
        if (--jrec->pushptrgood == 0) {
            jrec->parent = NULL;        /* 'save' contains garbage or NULL */
        } else {
            KKASSERT(save != NULL);
            jrec->parent = save;        /* 'save' must not be NULL */
        }

        /*
         * Set the record size in the old parent.  'last' still points to
         * the original last record in the subtransaction being popped,
         * jrec->last points to the old parent (which became the last
         * record relative to the new parent being popped into).
         */
        jrec->last->recsize = (char *)last + last->recsize - (char *)jrec->last;
    } else {
        jrec->parent = NULL;
        KKASSERT(jrec->last == NULL);
    }
}

/*
 * Write out a leaf record, including associated data.
 */
void
jrecord_leaf(struct jrecord *jrec, int16_t rectype, void *ptr, int bytes)
{
    jrecord_write(jrec, rectype, bytes);
    jrecord_data(jrec, ptr, bytes);
}

/*
 * Write a leaf record out and return a pointer to its base.  The leaf
 * record may contain potentially megabytes of data which is supplied
 * in jrecord_data() calls.  The exact amount must be specified in this
 * call.
 *
 * THE RETURNED SUBRECORD POINTER IS ONLY VALID IMMEDIATELY AFTER THE
 * CALL AND MAY BECOME INVALID AT ANY TIME.  ONLY THE PUSH/POP CODE SHOULD
 * USE THE RETURN VALUE.
 */
struct journal_subrecord *
jrecord_write(struct jrecord *jrec, int16_t rectype, int bytes)
{
    struct journal_subrecord *last;
    int pusheditout;

    /*
     * Try to catch some obvious errors.  Nesting records must specify a
     * size of 0, and there should be no left-overs from previous operations
     * (such as incomplete data writeouts).
     */
    KKASSERT(bytes == 0 || (rectype & JMASK_NESTED) == 0);
    KKASSERT(jrec->residual == 0);

    /*
     * Check to see if the current stream record has enough room for
     * the new subrecord header.  If it doesn't we extend the current
     * stream record.
     *
     * This may have the side effect of pushing out the current stream record
     * and creating a new one.  We must adjust our stream tracking fields
     * accordingly.
     */
    if (jrec->stream_residual < sizeof(struct journal_subrecord)) {
        jrec->stream_ptr = journal_extend(jrec->jo, &jrec->rawp,
                                jrec->stream_reserved - jrec->stream_residual,
                                JREC_DEFAULTSIZE, &pusheditout);
        if (pusheditout) {
            /*
             * If a pushout occured, the pushed out stream record was
             * truncated as specified and the new record is exactly the
             * extension size specified.
             */
            jrec->stream_reserved = JREC_DEFAULTSIZE;
            jrec->stream_residual = JREC_DEFAULTSIZE;
            jrec->parent = NULL;        /* no longer accessible */
            jrec->pushptrgood = 0;      /* restored parents in pops no good */
        } else {
            /*
             * If no pushout occured the stream record is NOT truncated and
             * IS extended.
             */
            jrec->stream_reserved += JREC_DEFAULTSIZE;
            jrec->stream_residual += JREC_DEFAULTSIZE;
        }
    }
    last = (void *)jrec->stream_ptr;
    last->rectype = rectype;
    last->reserved = 0;

    /*
     * We may not know the record size for recursive records and the 
     * header may become unavailable due to limited FIFO space.  Write
     * -1 to indicate this special case.
     */
    if ((rectype & JMASK_NESTED) && bytes == 0)
        last->recsize = -1;
    else
        last->recsize = sizeof(struct journal_subrecord) + bytes;
    jrec->last = last;
    jrec->residual = bytes;             /* remaining data to be posted */
    jrec->residual_align = -bytes & 7;  /* post-data alignment required */
    jrec->stream_ptr += sizeof(*last);  /* current write pointer */
    jrec->stream_residual -= sizeof(*last); /* space remaining in stream */
    return(last);
}

/*
 * Write out the data associated with a leaf record.  Any number of calls
 * to this routine may be made as long as the byte count adds up to the
 * amount originally specified in jrecord_write().
 *
 * The act of writing out the leaf data may result in numerous stream records
 * being pushed out.   Callers should be aware that even the associated
 * subrecord header may become inaccessible due to stream record pushouts.
 */
void
jrecord_data(struct jrecord *jrec, const void *buf, int bytes)
{
    int pusheditout;
    int extsize;

    KKASSERT(bytes >= 0 && bytes <= jrec->residual);

    /*
     * Push out stream records as long as there is insufficient room to hold
     * the remaining data.
     */
    while (jrec->stream_residual < bytes) {
        /*
         * Fill in any remaining space in the current stream record.
         */
        bcopy(buf, jrec->stream_ptr, jrec->stream_residual);
        buf = (const char *)buf + jrec->stream_residual;
        bytes -= jrec->stream_residual;
        /*jrec->stream_ptr += jrec->stream_residual;*/
        jrec->residual -= jrec->stream_residual;
        jrec->stream_residual = 0;

        /*
         * Try to extend the current stream record, but no more then 1/4
         * the size of the FIFO.
         */
        extsize = jrec->jo->fifo.size >> 2;
        if (extsize > bytes)
            extsize = (bytes + 15) & ~15;

        jrec->stream_ptr = journal_extend(jrec->jo, &jrec->rawp,
                                jrec->stream_reserved - jrec->stream_residual,
                                extsize, &pusheditout);
        if (pusheditout) {
            jrec->stream_reserved = extsize;
            jrec->stream_residual = extsize;
            jrec->parent = NULL;        /* no longer accessible */
            jrec->last = NULL;          /* no longer accessible */
            jrec->pushptrgood = 0;      /* restored parents in pops no good */
        } else {
            jrec->stream_reserved += extsize;
            jrec->stream_residual += extsize;
        }
    }

    /*
     * Push out any remaining bytes into the current stream record.
     */
    if (bytes) {
        bcopy(buf, jrec->stream_ptr, bytes);
        jrec->stream_ptr += bytes;
        jrec->stream_residual -= bytes;
        jrec->residual -= bytes;
    }

    /*
     * Handle data alignment requirements for the subrecord.  Because the
     * stream record's data space is more strictly aligned, it must already
     * have sufficient space to hold any subrecord alignment slop.
     */
    if (jrec->residual == 0 && jrec->residual_align) {
        KKASSERT(jrec->residual_align <= jrec->stream_residual);
        bzero(jrec->stream_ptr, jrec->residual_align);
        jrec->stream_ptr += jrec->residual_align;
        jrec->stream_residual -= jrec->residual_align;
        jrec->residual_align = 0;
    }
}

/*
 * We are finished with the transaction.  This closes the transaction created
 * by jrecord_init().
 *
 * NOTE: If abortit is not set then we must be at the top level with no
 *       residual subrecord data left to output.
 *
 *       If abortit is set then we can be in any state, all pushes will be 
 *       popped and it is ok for there to be residual data.  This works 
 *       because the virtual stream itself is truncated.  Scanners must deal
 *       with this situation.
 *
 * The stream record will be committed or aborted as specified and jrecord
 * resources will be cleaned up.
 */
void
jrecord_done(struct jrecord *jrec, int abortit)
{
    KKASSERT(jrec->rawp != NULL);

    if (abortit) {
        journal_abort(jrec->jo, &jrec->rawp);
    } else {
        KKASSERT(jrec->pushcount == 0 && jrec->residual == 0);
        journal_commit(jrec->jo, &jrec->rawp, 
                        jrec->stream_reserved - jrec->stream_residual, 1);
    }

    /*
     * jrec should not be used beyond this point without another init,
     * but clean up some fields to ensure that we panic if it is.
     *
     * Note that jrec->rawp is NULLd out by journal_abort/journal_commit.
     */
    jrec->jo = NULL;
    jrec->stream_ptr = NULL;
}

/************************************************************************
 *                      LOW LEVEL RECORD SUPPORT ROUTINES               *
 ************************************************************************
 *
 * These routine create low level recursive and leaf subrecords representing
 * common filesystem structures.
 */

/*
 * Write out a filename path relative to the base of the mount point.
 * rectype is typically JLEAF_PATH{1,2,3,4}.
 */
void
jrecord_write_path(struct jrecord *jrec, int16_t rectype, struct namecache *ncp)
{
    char buf[64];       /* local buffer if it fits, else malloced */
    char *base;
    int pathlen;
    int index;
    struct namecache *scan;

    /*
     * Pass 1 - figure out the number of bytes required.  Include terminating
     *         \0 on last element and '/' separator on other elements.
     *
     * The namecache topology terminates at the root of the filesystem
     * (the normal lookup code would then continue by using the mount
     * structure to figure out what it was mounted on).
     */
again:
    pathlen = 0;
    for (scan = ncp; scan; scan = scan->nc_parent) {
        if (scan->nc_nlen > 0)
            pathlen += scan->nc_nlen + 1;
    }

    if (pathlen <= sizeof(buf))
        base = buf;
    else
        base = kmalloc(pathlen, M_TEMP, M_INTWAIT);

    /*
     * Pass 2 - generate the path buffer
     */
    index = pathlen;
    for (scan = ncp; scan; scan = scan->nc_parent) {
        if (scan->nc_nlen == 0)
            continue;
        if (scan->nc_nlen >= index) {
            if (base != buf)
                kfree(base, M_TEMP);
            goto again;
        }
        if (index == pathlen)
            base[--index] = 0;
        else
            base[--index] = '/';
        index -= scan->nc_nlen;
        bcopy(scan->nc_name, base + index, scan->nc_nlen);
    }
    jrecord_leaf(jrec, rectype, base + index, pathlen - index);
    if (base != buf)
        kfree(base, M_TEMP);
}

/*
 * Write out a file attribute structure.  While somewhat inefficient, using
 * a recursive data structure is the most portable and extensible way.
 */
void
jrecord_write_vattr(struct jrecord *jrec, struct vattr *vat)
{
    void *save;

    save = jrecord_push(jrec, JTYPE_VATTR);
    if (vat->va_type != VNON)
        jrecord_leaf(jrec, JLEAF_VTYPE, &vat->va_type, sizeof(vat->va_type));
    if (vat->va_mode != (mode_t)VNOVAL)
        jrecord_leaf(jrec, JLEAF_MODES, &vat->va_mode, sizeof(vat->va_mode));
    if (vat->va_nlink != VNOVAL)
        jrecord_leaf(jrec, JLEAF_NLINK, &vat->va_nlink, sizeof(vat->va_nlink));
    if (vat->va_uid != VNOVAL)
        jrecord_leaf(jrec, JLEAF_UID, &vat->va_uid, sizeof(vat->va_uid));
    if (vat->va_gid != VNOVAL)
        jrecord_leaf(jrec, JLEAF_GID, &vat->va_gid, sizeof(vat->va_gid));
    if (vat->va_fsid != VNOVAL)
        jrecord_leaf(jrec, JLEAF_FSID, &vat->va_fsid, sizeof(vat->va_fsid));
    if (vat->va_fileid != VNOVAL)
        jrecord_leaf(jrec, JLEAF_INUM, &vat->va_fileid, sizeof(vat->va_fileid));
    if (vat->va_size != VNOVAL)
        jrecord_leaf(jrec, JLEAF_SIZE, &vat->va_size, sizeof(vat->va_size));
    if (vat->va_atime.tv_sec != VNOVAL)
        jrecord_leaf(jrec, JLEAF_ATIME, &vat->va_atime, sizeof(vat->va_atime));
    if (vat->va_mtime.tv_sec != VNOVAL)
        jrecord_leaf(jrec, JLEAF_MTIME, &vat->va_mtime, sizeof(vat->va_mtime));
    if (vat->va_ctime.tv_sec != VNOVAL)
        jrecord_leaf(jrec, JLEAF_CTIME, &vat->va_ctime, sizeof(vat->va_ctime));
    if (vat->va_gen != VNOVAL)
        jrecord_leaf(jrec, JLEAF_GEN, &vat->va_gen, sizeof(vat->va_gen));
    if (vat->va_flags != VNOVAL)
        jrecord_leaf(jrec, JLEAF_FLAGS, &vat->va_flags, sizeof(vat->va_flags));
    if (vat->va_rmajor != VNOVAL) {
        udev_t rdev = makeudev(vat->va_rmajor, vat->va_rminor);
        jrecord_leaf(jrec, JLEAF_UDEV, &rdev, sizeof(rdev));
        jrecord_leaf(jrec, JLEAF_UMAJOR, &vat->va_rmajor, sizeof(vat->va_rmajor));
        jrecord_leaf(jrec, JLEAF_UMINOR, &vat->va_rminor, sizeof(vat->va_rminor));
    }
#if 0
    if (vat->va_filerev != VNOVAL)
        jrecord_leaf(jrec, JLEAF_FILEREV, &vat->va_filerev, sizeof(vat->va_filerev));
#endif
    jrecord_pop(jrec, save);
}

/*
 * Write out the creds used to issue a file operation.  If a process is
 * available write out additional tracking information related to the 
 * process.
 *
 * XXX additional tracking info
 * XXX tty line info
 */
void
jrecord_write_cred(struct jrecord *jrec, struct thread *td, struct ucred *cred)
{
    void *save;
    struct proc *p;

    save = jrecord_push(jrec, JTYPE_CRED);
    jrecord_leaf(jrec, JLEAF_UID, &cred->cr_uid, sizeof(cred->cr_uid));
    jrecord_leaf(jrec, JLEAF_GID, &cred->cr_gid, sizeof(cred->cr_gid));
    if (td && (p = td->td_proc) != NULL) {
        jrecord_leaf(jrec, JLEAF_PID, &p->p_pid, sizeof(p->p_pid));
        jrecord_leaf(jrec, JLEAF_COMM, p->p_comm, sizeof(p->p_comm));
    }
    jrecord_pop(jrec, save);
}

/*
 * Write out information required to identify a vnode
 *
 * XXX this needs work.  We should write out the inode number as well,
 * and in fact avoid writing out the file path for seqential writes
 * occuring within e.g. a certain period of time.
 */
void
jrecord_write_vnode_ref(struct jrecord *jrec, struct vnode *vp)
{
    struct namecache *ncp;

    TAILQ_FOREACH(ncp, &vp->v_namecache, nc_vnode) {
        if ((ncp->nc_flag & (NCF_UNRESOLVED|NCF_DESTROYED)) == 0)
            break;
    }
    if (ncp)
        jrecord_write_path(jrec, JLEAF_PATH_REF, ncp);
}

void
jrecord_write_vnode_link(struct jrecord *jrec, struct vnode *vp, 
                         struct namecache *notncp)
{
    struct namecache *ncp;

    TAILQ_FOREACH(ncp, &vp->v_namecache, nc_vnode) {
        if (ncp == notncp)
            continue;
        if ((ncp->nc_flag & (NCF_UNRESOLVED|NCF_DESTROYED)) == 0)
            break;
    }
    if (ncp)
        jrecord_write_path(jrec, JLEAF_PATH_REF, ncp);
}

/*
 * Write out the data represented by a pagelist
 */
void
jrecord_write_pagelist(struct jrecord *jrec, int16_t rectype,
                        struct vm_page **pglist, int *rtvals, int pgcount,
                        off_t offset)
{
    struct msf_buf *msf;
    int error;
    int b;
    int i;

    i = 0;
    while (i < pgcount) {
        /*
         * Find the next valid section.  Skip any invalid elements
         */
        if (rtvals[i] != VM_PAGER_OK) {
            ++i;
            offset += PAGE_SIZE;
            continue;
        }

        /*
         * Figure out how big the valid section is, capping I/O at what the
         * MSFBUF can represent.
         */
        b = i;
        while (i < pgcount && i - b != XIO_INTERNAL_PAGES && 
               rtvals[i] == VM_PAGER_OK
        ) {
            ++i;
        }

        /*
         * And write it out.
         */
        if (i - b) {
            error = msf_map_pagelist(&msf, pglist + b, i - b, 0);
            if (error == 0) {
                kprintf("RECORD PUTPAGES %d\n", msf_buf_bytes(msf));
                jrecord_leaf(jrec, JLEAF_SEEKPOS, &offset, sizeof(offset));
                jrecord_leaf(jrec, rectype, 
                             msf_buf_kva(msf), msf_buf_bytes(msf));
                msf_buf_free(msf);
            } else {
                kprintf("jrecord_write_pagelist: mapping failure\n");
            }
            offset += (off_t)(i - b) << PAGE_SHIFT;
        }
    }
}

/*
 * Write out the data represented by a UIO.
 */
struct jwuio_info {
    struct jrecord *jrec;
    int16_t rectype;
};

static int jrecord_write_uio_callback(void *info, char *buf, int bytes);

void
jrecord_write_uio(struct jrecord *jrec, int16_t rectype, struct uio *uio)
{
    struct jwuio_info info = { jrec, rectype };
    int error;

    if (uio->uio_segflg != UIO_NOCOPY) {
        jrecord_leaf(jrec, JLEAF_SEEKPOS, &uio->uio_offset, 
                     sizeof(uio->uio_offset));
        error = msf_uio_iterate(uio, jrecord_write_uio_callback, &info);
        if (error)
            kprintf("XXX warning uio iterate failed %d\n", error);
    }
}

static int
jrecord_write_uio_callback(void *info_arg, char *buf, int bytes)
{
    struct jwuio_info *info = info_arg;

    jrecord_leaf(info->jrec, info->rectype, buf, bytes);
    return(0);
}

void
jrecord_file_data(struct jrecord *jrec, struct vnode *vp, 
                  off_t off, off_t bytes)
{
    const int bufsize = 8192;
    char *buf;
    int error;
    int n;

    buf = kmalloc(bufsize, M_JOURNAL, M_WAITOK);
    jrecord_leaf(jrec, JLEAF_SEEKPOS, &off, sizeof(off));
    while (bytes) {
        n = (bytes > bufsize) ? bufsize : (int)bytes;
        error = vn_rdwr(UIO_READ, vp, buf, n, off, UIO_SYSSPACE, IO_NODELOCKED,
                        proc0.p_ucred, NULL);
        if (error) {
            jrecord_leaf(jrec, JLEAF_ERROR, &error, sizeof(error));
            break;
        }
        jrecord_leaf(jrec, JLEAF_FILEDATA, buf, n);
        bytes -= n;
        off += n;
    }
    kfree(buf, M_JOURNAL);
}