etc/defaults/rc.conf

   1 #!/bin/sh
   2 #
   3
   4 # This is rc.conf - a file full of useful variables that you can set
   5 # to change the default startup behavior of your system.  You should
   6 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
   7 # instead and you will be able to update these defaults later without
   8 # spamming your local configuration information.
   9 #
  10 # The ${rc_conf_files} files should only contain values which override
  11 # values set in this file.  This eases the upgrade path when defaults
  12 # are changed and new features are added.
  13 #
  14 # All arguments must be in double or single quotes.
  15 #
  16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
  17 # $DragonFly: src/etc/defaults/rc.conf,v 1.43 2007/10/02 12:57:00 hasso Exp $
  18
  19 ##############################################################
  20 ###  Important initial Boot-time options  ####################
  21 ##############################################################
  22
  23 rc_debug="NO"           # Set to YES to enable debugging output from rc.d
  24 rc_info="YES"           # Enables display of informational messages at boot.
  25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
  26 swapfile="NO"           # Set to name of swapfile if aux swapfile desired.
  27 apm_enable="NO"         # Set to YES to enable APM BIOS functions (or NO).
  28 apmd_enable="NO"        # Run apmd to handle APM event from userland.
  29 apmd_flags=""           # Flags to apmd (if enabled).
  30 battd_enable="NO"       # Set to YES to have battd alert on 10% battery power remaining.
  31 battd_flags=""          # Flags to battd (if enabled).
  32 kldxref_enable="NO"     # Build linker.hints files with kldxref(8).
  33 kldxref_clobber="NO"    # Overwrite old linker.hints at boot.
  34 kldxref_module_path=""  # Override kern.module_path. A ';'-delimited list.
  35 sensorsd_enable="NO"    # Run sensorsd to monitor and log sensor state changes.
  36 sensorsd_flags=""       # additional flags for sensorsd(8).
  37 pccard_ifconfig="NO"    # Specialized pccard ethernet configuration (or NO).
  38 pccard_ether_delay="5"  # Delay before trying to start dhclient in pccard_ether
  39 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
  40 local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/pkg/xorg/etc/rc.d /usr/X11R6/etc/rc.d"
  41                         # startup script dirs.
  42 script_name_sep=" "     # Change if your startup scripts' names contain spaces
  43 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
  44 fsck_y_enable="NO"      # Set to YES to do fsck -y if the initial preen fails.
  45 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
  46 extra_netfs_types="NO"  # List of network extra filesystem types for delayed
  47                         # mount at startup (or NO).
  48
  49 ##############################################################
  50 ###  Network configuration sub-section  ######################
  51 ##############################################################
  52
  53 ### Basic network and firewall/security options: ###
  54 #
  55 # see 'man firewall' for an explanation of the default firewall rules
  56 #
  57 hostname=""                     # Set this!
  58 nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
  59 dhclient_program="/sbin/dhclient"       # Path to dhcp client program.
  60 dhclient_flags=""               # Additional flags to pass to dhcp client.
  61 dhcpd_enable="NO"               # Set to YES to enable the DHCP server
  62 dhcrelay_enable="NO"            # Set to YES to enable the DHCP relay server
  63 firewall_enable="NO"            # Set to YES to enable firewall functionality
  64 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
  65 firewall_type="UNKNOWN"         # Firewall type (see /etc/rc.firewall)
  66 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
  67 firewall_trusted_interfaces=""  # list of trusted interfaces e.g. "rl0 xl0"
  68 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
  69 firewall_open_tcp_ports="22 25 53 80 113 443"
  70 firewall_open_udp_ports="53"
  71 firewall_quiet="NO"             # Set to YES to suppress rule display
  72 firewall_logging="NO"           # Set to YES to enable events logging
  73 firewall_flags=""               # Flags passed to ipfw when type is a file
  74 ip_portrange_first="NO"         # Set first dynamically allocated port
  75 ip_portrange_last="NO"          # Set last dynamically allocated port
  76 ipsec_enable="NO"               # Set to YES to run setkey on ipsec_file
  77 ipsec_file="/etc/ipsec.conf"    # Name of config file for setkey
  78 natd_program="/sbin/natd"       # path to natd, if you want a different one.
  79 natd_enable="NO"                # Enable natd (if firewall_enable == YES).
  80 natd_interface=""               # Public interface or IPaddress to use.
  81 natd_flags=""                   # Additional flags for natd.
  82 ipfilter_enable="NO"            # Set to YES to enable ipfilter functionality
  83 ipfilter_program="/sbin/ipf"    # where the ipfilter program lives
  84 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
  85                                 # /usr/src/contrib/ipfilter/rules for examples
  86 ipfilter_flags=""               # additional flags for ipfilter
  87 ipnat_enable="NO"               # Set to YES to enable ipnat functionality
  88 ipnat_program="/sbin/ipnat"     # where the ipnat program lives
  89 ipnat_rules="/etc/ipnat.rules"  # rules definition file for ipnat
  90 ipnat_flags=""                  # additional flags for ipnat
  91 ipmon_enable="NO"               # Set to YES for ipmon; needs ipfilter or ipnat
  92 ipmon_program="/sbin/ipmon"     # where the ipfilter monitor program lives
  93 ipmon_flags="-Ds"               # typically "-Ds" or "-D /var/log/ipflog"
  94 ipfs_enable="NO"                # Set to YES to enable saving and restoring
  95                                 # of state tables at shutdown and boot
  96 ipfs_program="/sbin/ipfs"       # where the ipfs program lives
  97 ipfs_flags=""                   # additional flags for ipfs
  98 pf_enable="NO"                  # Set to YES to enable packet filter (pf)
  99 pf_rules="/etc/pf.conf"         # rules definition file for pf
 100 pf_program="/usr/sbin/pfctl"    # where the pfctl program lives
 101 pf_flags=""                     # additional flags for pfctl
 102 pflog_enable="NO"               # Set to YES to enable packet filter logging
 103 pflog_logfile="/var/log/pflog"  # where pflogd should store the logfile
 104 pflog_program="/usr/sbin/pflogd"        # where the pflogd program lives
 105 pflog_flags=""                  # additional flags for pflogd
 106 tcp_extensions="YES"            # Set to NO to turn off RFC1323 extensions.
 107 log_in_vain="0"                 # >=1 to log connects to ports w/o listeners.
 108 tcp_keepalive="YES"             # Enable stale TCP connection timeout (or NO).
 109 # For the following option you need to have TCP_DROP_SYNFIN set in your
 110 # kernel.  Please refer to LINT and NOTES for details.
 111 tcp_drop_synfin="NO"            # Set to YES to drop TCP packets with SYN+FIN
 112                                 # NOTE: this violates the TCP specification
 113 icmp_drop_redirect="NO"         # Set to YES to ignore ICMP REDIRECT packets
 114 icmp_log_redirect="NO"          # Set to YES to log ICMP REDIRECT packets
 115 network_interfaces="auto"       # List of network interfaces (or "auto").
 116 cloned_interfaces=""            # List of cloned network interfaces to create.
 117 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
 118 ifconfig_lo0="inet 127.0.0.1"   # default loopback device configuration.
 119 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
 120 #ifconfig_ed0_ipx="ipx 0x00010010"      # Sample IPX address family entry.
 121 #ifconfig_fxp0_name="net0"      # Change interface name from fxp0 to net0.
 122 #
 123 # If you have any sppp(4) interfaces above, you might also want to set
 124 # the following parameters.  Refer to spppcontrol(8) for their meaning.
 125 sppp_interfaces=""              # List of sppp interfaces.
 126 #sppp_interfaces="isp0"         # example: sppp over ISDN
 127 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
 128 gif_interfaces="NO"             # List of GIF tunnels (or "NO").
 129 #gif_interfaces="gif0 gif1"     # Examples typically for a router.
 130                                 # Choose correct tunnel addrs.
 131 #gifconfig_gif0="10.1.1.1 10.1.2.1"     # Examples typically for a router.
 132 #gifconfig_gif1="10.1.1.2 10.1.2.2"     # Examples typically for a router.
 133
 134 # User ppp configuration.
 135 ppp_enable="NO"         # Start user-ppp (or NO).
 136 ppp_mode="auto"         # Choice of "auto", "ddial", "direct" or "dedicated".
 137                         # For details see man page for ppp(8). Default is auto.
 138 ppp_nat="YES"           # Use PPP's internal network address translation or NO.
 139 ppp_profile="papchap"   # Which profile to use from /etc/ppp/ppp.conf.
 140 ppp_user="root"         # Which user to run ppp as
 141
 142 ### Network daemon (miscellaneous) ###
 143 hostapd_enable="NO"             # Run hostap daemon.
 144 syslogd_enable="YES"            # Run syslog daemon (or NO).
 145 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
 146 #syslogd_flags="-s"             # Flags to syslogd (if enabled).
 147 syslogd_flags="-ss"             # Syslogd flags to not bind an inet socket
 148 inetd_enable="NO"               # Run the network daemon dispatcher (YES/NO).
 149 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
 150 inetd_flags="-wW"               # Optional flags to inetd
 151 #
 152 # named.  It may be possible to run named in a sandbox, man security for
 153 # details.  Note: when named_chrootdir is specified, RCNG automatically
 154 # adds '-u bind'.
 155 #
 156 named_enable="NO"               # Run named, the DNS server (or NO).
 157 named_program="/usr/sbin/named" # path to named, if you want a different one.
 158 named_pidfile="/var/run/named.pid" # Pid file
 159 named_chrootdir="/etc/namedb"   # Chroot directory (or "" not to auto-chroot it)
 160
 161 #
 162 # kerberos. Do not run the admin daemons on slave servers
 163 #
 164 kerberos5_server_enable="NO"    # Run a kerberos 5 master server (or NO).
 165 kerberos5_server_program="/usr/libexec/kdc"     # path to kerberos 5 KDC
 166 kadmind5_server_enable="NO"     # Run kadmind (or NO)
 167 kadmind5_server_program="/usr/libexec/kadmind"  # path to kerberos 5 admin daemon
 168 kpasswdd_server_enable="NO"     # Run kpasswdd (or NO)
 169 kpasswdd_server_program="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
 170
 171 rwhod_enable="NO"               # Run the rwho daemon (or NO).
 172 rwhod_flags=""                  # Flags for rwhod
 173 rarpd_enable="NO"               # Run rarpd (or NO).
 174 rarpd_flags=""                  # Flags to rarpd.
 175 bootparamd_enable="NO"          # Run bootparamd (or NO).
 176 bootparamd_flags=""             # Flags to bootparamd
 177 pppoed_enable="NO"              # Run the PPP over Ethernet daemon.
 178 pppoed_provider="*"             # Provider and ppp(8) config file entry.
 179 pppoed_flags="-P /var/run/pppoed.pid"   # Flags to pppoed (if enabled).
 180 pppoed_interface="fxp0"         # The interface that pppoed runs on.
 181 sshd_enable="NO"                # Enable sshd
 182 sshd_program="/usr/sbin/sshd"   # path to sshd, if you want a different one.
 183 sshd_flags=""                   # Additional flags for sshd.
 184
 185 ftpd_enable="NO"                # Run stand-alone ftp daemon (or NO).
 186 ftpd_flags=""                   # Flags for ftpd, -D added implicitly.
 187
 188 ### Network File System (NFS): ###
 189 ### Server-side options also need rpcbind_enable="YES" ###
 190 ###
 191 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's.  If
 192 ### the mtime matches the data cache is left intact.
 193 ###
 194 amd_enable="NO"                 # Run amd service with $amd_flags (or NO).
 195 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
 196 amd_map_program="NO"            # Can be set to "ypcat -k amd.master"
 197 nfs_client_enable="NO"          # This host is an NFS client (or NO).
 198 nfs_client_flags="-n 4"         # Flags to nfsiod (if enabled).
 199 nfs_access_cache="5"            # Client attribute cache timeout in seconds
 200 #nfs_neg_cache="3"              # Client attribute negative hit cache timeout
 201 nfs_server_enable="NO"          # This host is an NFS server (or NO).
 202 nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
 203 mountd_enable="NO"              # Run mountd (or NO).
 204 mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
 205 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
 206 nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
 207 nfs_bufpackets=""               # bufspace (in packets) for client
 208 rpc_lockd_enable="NO"           # Run NFS rpc.lockd needed for client/server.
 209 rpc_statd_enable="NO"           # Run NFS rpc.statd needed for client/server.
 210 rpc_umntall_enable="YES"        # Run NFS rpc.umntall on boot and shutdown
 211 rpcbind_enable="NO"             # Run the portmapper service (YES/NO).
 212 # this is rpcbind in 5.x
 213 rpcbind_program="/usr/sbin/portmap"     # path to rpcbind, if you want a different one.
 214 rpcbind_flags=""                # Flags to rpcbind (if enabled).
 215 rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
 216 keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
 217 keyserv_flags=""                # Flags to keyserv (if enabled).
 218
 219 ### Network Time Services options: ###
 220 timed_enable="NO"               # Run the time daemon (or NO).
 221 timed_flags=""                  # Flags to timed (if enabled).
 222 ntpd_enable="NO"                # Run ntpd Network Time Protocol (or NO).
 223 ntpd_program="/usr/sbin/ntpd"   # path to ntpd, if you want a different one.
 224 ntpd_flags="-s"                 # Flags to ntpd (if enabled).
 225 dntpd_enable="NO"               # Run dntpd Network Time Protocol (or NO).
 226 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
 227 dntpd_flags=""                  # Flags to dntpd (if enabled) also server name(s)
 228
 229 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
 230 nis_client_enable="NO"          # We're an NIS client (or NO).
 231 nis_client_flags=""             # Flags to ypbind (if enabled).
 232 nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
 233 nis_ypset_flags=""              # Flags to ypset (if enabled).
 234 nis_server_enable="NO"          # We're an NIS server (or NO).
 235 nis_server_flags=""             # Flags to ypserv (if enabled).
 236 nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
 237 nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
 238 nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
 239 nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).
 240
 241 ### Network routing options: ###
 242 defaultrouter="NO"              # Set to default gateway (or NO).
 243 static_routes=""                # Set to static route list (or leave empty).
 244 gateway_enable="NO"             # Set to YES if this host will be a gateway.
 245 router_enable="NO"              # Set to YES to enable a routing daemon.
 246 router_program="/sbin/routed"           # Name of routing daemon to use if enabled.
 247 router_flags="-q"               # Flags for routing daemon.
 248 mrouted_enable="NO"             # Do multicast routing (see /etc/mrouted.conf).
 249 mrouted_flags=""                # Flags for multicast routing daemon.
 250 ipxgateway_enable="NO"          # Set to YES to enable IPX routing.
 251 ipxrouted_enable="NO"           # Set to YES to run the IPX routing daemon.
 252 ipxrouted_flags=""              # Flags for IPX routing daemon.
 253 arpproxy_all="NO"               # replaces obsolete kernel option ARP_PROXYALL.
 254 forward_sourceroute="NO"        # do source routing (only if gateway_enable is set to "YES")
 255 accept_sourceroute="NO"         # accept source routed packets to us
 256
 257 ### ATM interface options: ###
 258 atm_enable="NO"                 # Configure ATM interfaces (or NO).
 259 #atm_netif_hea0="atm 1"         # Network interfaces for physical interface.
 260 #atm_sigmgr_hea0="uni31"        # Signalling manager for physical interface.
 261 #atm_prefix_hea0="ILMI"         # NSAP prefix (UNI interfaces only) (or ILMI).
 262 #atm_macaddr_hea0="NO"          # Override physical MAC address (or NO).
 263 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
 264 #atm_scsparp_atm0="NO"          # Run SCSP/ATMARP on network interface (or NO).
 265 atm_arps=""                     # Set to permanent ARP list (or leave empty).
 266
 267 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
 268 isdn_enable="NO"                # Enable the ISDN subsystem (or NO).
 269 isdn_fsdev="NO"                 # Output device for fullscreen mode (or NO for daemon mode).
 270 isdn_flags="-dn -d0x1f9"        # Flags for isdnd
 271 isdn_ttype="cons25"             # terminal type for fullscreen mode
 272 isdn_screenflags="NO"           # screenflags for ${isdn_fsdev}
 273 isdn_trace="NO"                 # Enable the ISDN trace subsystem (or NO).
 274 isdn_traceflags="-f /var/tmp/isdntrace0"        # Flags for isdntrace
 275
 276 ### Miscellaneous network options: ###
 277 icmp_bmcastecho="NO"    # respond to broadcast ping packets
 278
 279 ### IPv6 options: ###
 280 ipv6_enable="NO"                # Set to YES to set up for IPv6.
 281 ipv6_network_interfaces="auto"  # List of network interfaces (or "auto").
 282 ipv6_defaultrouter="NO"         # Set to IPv6 default gateway (or NO).
 283 #ipv6_defaultrouter="2002:c058:6301::"  # Use this for 6to4 (RFC 3068)
 284 ipv6_static_routes=""           # Set to static route list (or leave empty).
 285 #ipv6_static_routes="xxx"       # An example to set fec0:0000:0000:0006::/64
 286                                 #  route toward loopback interface.
 287 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
 288 ipv6_gateway_enable="NO"        # Set to YES if this host will be a gateway.
 289 ipv6_router_enable="NO"         # Set to YES to enable an IPv6 routing daemon.
 290 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
 291 ipv6_router_flags=""            # Flags to IPv6 routing daemon.
 292 #ipv6_router_flags="-l"         # Example for route6d with only IPv6 site local
 293                                 # addrs.
 294 #ipv6_router_flags="-q"         # If you want to run a routing daemon on an end
 295                                 # node, you should stop advertisement.
 296 #ipv6_network_interfaces="ed0 ep0"      # Examples for router
 297                                         # or static configuration for end node.
 298                                         # Choose correct prefix value.
 299 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
 300 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
 301 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
 302 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
 303 ipv6_default_interface="NO"     # Default output interface for scoped addrs.
 304                                 # Now this works only for IPv6 link local
 305                                 # multicast addrs.
 306 rtadvd_enable="NO"              # Set to YES to enable an IPv6 router
 307                                 # advertisement daemon. If set to YES,
 308                                 # this router becomes a possible candidate
 309                                 # IPv6 default router for local subnets.
 310 rtadvd_interfaces=""            # Interfaces rtadvd sends RA packets.
 311 rtsold_enable="NO"              # Set to YES to enable an IPv6 routing
 312                                 # solicitation daemon.  This is used for
 313                                 # automatic discovery of non-link local
 314                                 # addresses.
 315 rtsold_flags="-a"               # Do autoprobing of outgoing interface.
 316 mroute6d_enable="NO"            # Do IPv6 multicast routing.
 317 mroute6d_program="/usr/local/sbin/pim6dd"       # Name of IPv6 multicast
 318                                                 # routing daemon.  You need to
 319                                                 # install it from package or
 320                                                 # port.
 321 mroute6d_flags=""               # Flags to IPv6 multicast routing daemon.
 322 stf_interface_ipv4addr=""       # Local IPv4 addr for 6to4 IPv6 over IPv4
 323                                 # tunneling interface. Specify this entry
 324                                 # to enable 6to4 interface.
 325 stf_interface_ipv4plen="0"      # Prefix length for 6to4 IPv4 addr,
 326                                 # to limit peer addr range. Effective value
 327                                 # is 0-31.
 328 stf_interface_ipv6_ifid="0:0:0:1"       # IPv6 interface id for stf0.
 329                                 # If you like, you can set "AUTO" for this.
 330 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
 331 ipv6_faith_prefix="NO"          # Set faith prefix to enable a FAITH
 332                                 # IPv6-to-IPv4 TCP translator.  You also need
 333                                 # faithd(8) setup.
 334 ipv6_ipv4mapping="NO"           # Set to "YES" to enable IPv4 mapped IPv6 addr
 335                                 # communication. (like ::ffff:a.b.c.d)
 336 ipv6_firewall_enable="NO"       # Set to YES to enable IPv6 firewall
 337                                 # functionality
 338 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
 339 ipv6_firewall_type="UNKNOWN"    # IPv6 Firewall type (see /etc/rc.firewall6)
 340 ipv6_firewall_quiet="NO"        # Set to YES to suppress rule display
 341 ipv6_firewall_logging="NO"      # Set to YES to enable events logging
 342 ipv6_firewall_flags=""          # Flags passed to ip6fw when type is a file
 343 ipv6_ipfilter_rules="/etc/ipf6.rules"   # rules definition file for ipfilter,
 344                                         # see /usr/src/contrib/ipfilter/rules
 345                                         # for examples
 346
 347 ##############################################################
 348 ###  System console options  #################################
 349 ##############################################################
 350
 351 keymap="NO"             # keymap in /usr/share/syscons/keymaps/* (or NO).
 352 keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
 353 keybell="NO"            # See kbdcontrol(1) for options.  Use "off" to disable.
 354 keychange="NO"          # function keys default values (or NO).
 355 cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
 356 scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
 357 font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
 358 font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
 359 font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
 360 blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
 361 saver="NO"              # screen saver: Uses /modules/${saver}_saver.ko
 362 moused_enable="NO"      # Run the mouse daemon.
 363 moused_type="auto"      # See man page for rc.conf(5) for available settings.
 364 moused_port="/dev/psm0" # Set to your mouse port.
 365 moused_flags=""         # Any additional flags to moused.
 366 mousechar_start="NO"    # if 0xd0-0xd3 default range is occupied in your
 367                         # language code table, specify alternative range
 368                         # start like mousechar_start=3, see vidcontrol(1)
 369 vidhistory=""           # Set video history buffer size
 370 allscreens_flags=""     # Set this vidcontrol mode for all virtual screens
 371 allscreens_kbdflags=""  # Set this kbdcontrol mode for all virtual screens
 372
 373
 374 ##############################################################
 375 ###  Mail Transfer Agent (MTA) options  ######################
 376 ##############################################################
 377
 378 mta_start_script="/etc/rc.sendmail"
 379                         # Script to start your chosen MTA, called by /etc/rc.
 380 # Settings for /etc/rc.sendmail:
 381 sendmail_enable="NO"    # Run the sendmail inbound daemon (YES/NO).
 382 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
 383 sendmail_submit_enable="YES"    # Start a localhost-only MTA for mail submission
 384 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
 385                                 # Flags for localhost-only MTA
 386 sendmail_outbound_enable="YES"  # Dequeue stuck mail (YES/NO).
 387 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
 388 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
 389 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
 390                                 # Flags for sendmail_msp_queue daemon.
 391
 392
 393 ##############################################################
 394 ###  Miscellaneous administrative options  ###################
 395 ##############################################################
 396
 397 mixer_enable="NO"       # Manage mixer settings across reboots
 398 cron_enable="YES"       # Run the periodic job daemon.
 399 cron_program="/usr/sbin/cron"   # Which cron executable to run (if enabled).
 400 cron_flags=""           # Which options to pass to the cron daemon.
 401 lpd_enable="NO"         # Run the line printer daemon.
 402 lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
 403 lpd_flags=""            # Flags to lpd (if enabled).
 404 usbd_enable="NO"        # Run the usbd daemon.
 405 usbd_flags=""           # Flags to usbd (if enabled).
 406 dumpdev="NO"            # Device name to crashdump to (or NO).
 407 dumpdir="/var/crash"    # Directory where crash dumps are to be stored
 408 savecore_flags=""       # Used if dumpdev is enabled above, and present.
 409 enable_quotas="NO"      # turn on quotas on startup (or NO).
 410 check_quotas="YES"      # Check quotas on startup (or NO).
 411 accounting_enable="NO"  # Turn on process accounting (or NO).
 412 sysvipc_enable="NO"     # Load System V IPC primitives at startup (or NO).
 413 linux_enable="NO"       # Linux binary compatibility loaded at startup (or NO).
 414 clear_tmp_enable="NO"   # Clear /tmp at startup.
 415 ldconfig_insecure="NO"  # Set to YES to disable ldconfig security checks
 416 ldconfig_paths="/usr/lib/compat /usr/pkg/lib /usr/pkg/xorg/lib /usr/local/lib"
 417                         # shared library search paths
 418 kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
 419 update_motd="YES"       # update version info in /etc/motd (or NO)
 420 start_vinum="NO"        # set to YES to start vinum
 421 rand_irqs="NO"          # Stir the entropy pool (like "5 11" or NO).
 422 dmesg_enable="YES"      # Save dmesg(8) to /var/run/dmesg.boot
 423 resident_enable="NO"    # Process /etc/resident.conf
 424 varsym_enable="NO"      # Process /etc/varsym.conf
 425 watchdogd_enable="NO"   # Start the software watchdog daemon
 426
 427 ##############################################################
 428 ### Jail Configuration #######################################
 429 ##############################################################
 430
 431 jail_enable="NO"        # Set to NO to disable starting of any jails
 432 jail_list=""            # Space separated list of names of jails
 433 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
 434 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
 435 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
 436
 437 #
 438 # To use rc's built-in jail infrastructure create entries for
 439 # each jail, specified in jail_list, with the following variables.
 440 # NOTES:
 441 # - replace 'example' with the jail's name.
 442 # - except rootdir, hostname and ip, all of the following variables may be made
 443 #   global jail variables if you don't specify a jail name (ie. jail_interface).
 444 #
 445 #jail_example_rootdir="/usr/jail/default"       # Jail's root directory
 446 #jail_example_hostname="default.domain.com"     # Jail's hostname
 447 #jail_example_ip="192.168.0.10"                 # Jail's IP number
 448 #jail_example_interface=""                      # Interface to create the IP alias on
 449 #jail_example_exec_start="/bin/sh /etc/rc"              # command to execute in jail for starting
 450 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown"      # command to execute in jail for stopping
 451 #jail_example_fdesc_enable="NO"                 # mount fdesc in the jail
 452 #jail_example_procfs_enable="NO"                # mount procfs in jail
 453 #jail_example_mount_enable="NO"                 # mount/umount jail's fs
 454 #jail_example_fstab=""                          # fstab(5) for mount/umount
 455 #jail_example_flags="-l -U root"                # flags for jail(8)
 456
 457 ##############################################################
 458 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
 459 ### scripts to source rc_conf_files overrides safely.       ##
 460 ##############################################################
 461
 462 if [ -z "${source_rc_confs_defined}" ]; then
 463         source_rc_confs_defined=yes
 464         source_rc_confs () {
 465                 local i sourced_files
 466                 for i in ${rc_conf_files}; do
 467                         case ${sourced_files} in
 468                         *:$i:*)
 469                                 ;;
 470                         *)
 471                                 sourced_files="${sourced_files}:$i:"
 472                                 if [ -r $i ]; then
 473                                         . $i
 474                                 fi
 475                                 ;;
 476                         esac
 477                 done
 478         }
 479 fi