| blob | 6f96b9c84707aaf14db07875738ee2e1659689c4 |
1 #
2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
3 #
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
6 #
7 # $DragonFly: src/sys/config/GENERIC,v 1.57 2008/02/01 13:18:49 sephe Exp $
9 platform pc32
10 machine i386
11 machine_arch i386
12 cpu I486_CPU
13 cpu I586_CPU
14 cpu I686_CPU
15 ident GENERIC
16 maxusers 0
18 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
20 options MATH_EMULATE #Support for x87 emulation
21 options INET #InterNETworking
22 options INET6 #IPv6 communications protocols
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options MD_ROOT #MD is a potential root device
29 options NFS #Network Filesystem
30 options NFS_ROOT #NFS usable as root device, NFS required
31 options MSDOSFS #MSDOS Filesystem
32 options CD9660 #ISO 9660 Filesystem
33 options PROCFS #Process filesystem
34 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
35 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
36 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
37 options DEVICE_POLLING # Support mixed interrupt-polling
38 # handling of network device drivers
39 options UCONSOLE #Allow users to grab the console
40 options USERCONFIG #boot -c editor
41 options VISUAL_USERCONFIG #visual boot -c editor
42 options KTRACE #ktrace(1) support
43 options SYSVSHM #SYSV-style shared memory
44 options SYSVMSG #SYSV-style message queues
45 options SYSVSEM #SYSV-style semaphores
46 options P1003_1B #Posix P1003_1B real-time extensions
47 options _KPOSIX_PRIORITY_SCHEDULING
48 options ICMP_BANDLIM #Rate limit bad replies
49 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
50 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
51 # output. Adds ~128k to driver.
52 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
53 # output. Adds ~215k to driver.
55 # To make an SMP kernel both SMP and APIC_IO are usually
56 # specified. SMP boxes with severely broken BIOSes which
57 # boot fine for non-SMP builds *might* work in SMP mode
58 # if you define SMP and leave APIC_IO turned off.
59 #
60 #options SMP # Symmetric MultiProcessor Kernel
61 #options APIC_IO # Symmetric (APIC) I/O
63 # Debugging for Development
64 options DDB
65 options DDB_TRACE
66 options INVARIANTS
68 # ACPI options
69 #options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
71 device isa
72 device eisa
73 device pci
75 # Floppy drives
76 device fdc0 at isa? port IO_FD1 irq 6 drq 2
77 device fd0 at fdc0 drive 0
78 device fd1 at fdc0 drive 1
79 #
80 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
81 # don't use the above line for fdc0 but the following one:
82 #device fdc0
84 # NEW-ATA (NATA) and ATAPI devices
85 #
86 device nata
87 device natadisk # ATA disk drives
88 device natapicd # ATAPI CDROM drives
89 device natapifd # ATAPI floppy drives
90 device natapist # ATAPI tape drives
91 device natapicam # Emulate ATAPI devices as SCSI
92 device nataraid # support for ATA software RAID
93 # controllers
94 device natausb # ATA-over-USB support
95 options ATA_STATIC_ID # Static device numbering
96 options PCI_MAP_FIXUP # Needed for NATA
98 # LEGACY ATA and ATAPI devices
99 #device ata0 at isa? port IO_WD1 irq 14
100 #device ata1 at isa? port IO_WD2 irq 15
101 #device ata
102 #device atadisk # ATA disk drives
103 #device atapicd # ATAPI CDROM drives
104 #device atapifd # ATAPI floppy drives
105 #device atapist # ATAPI tape drives
106 #device atapicam # Emulate ATAPI devices as SCSI via CAM
107 #options ATA_STATIC_ID #Static device numbering
109 # SCSI Controllers
110 device ahb # EISA AHA1742 family
111 device ahc # AHA2940 and onboard AIC7xxx devices
112 device ahd # AHA39320/29320 and onboard AIC79xx devices
113 device amd # AMD 53C974 (Tekram DC-390(T))
114 device isp # Qlogic family
115 device mpt # LSI-Logic MPT/Fusion
116 device ncr # NCR/Symbios Logic
117 device sym # NCR/Symbios Logic (newer chipsets)
118 options SYM_SETUP_LP_PROBE_MAP=0x40
119 # Allow ncr to attach legacy NCR devices when
120 # both sym and ncr are configured
122 device adv0 at isa?
123 device adw
124 device bt0 at isa?
125 device aha0 at isa?
126 device aic0 at isa?
128 device ncv # NCR 53C500
129 device nsp # Workbit Ninja SCSI-3
130 device stg # TMC 18C30/18C50
132 # SCSI peripherals
133 device scbus # SCSI bus (required)
134 device da # Direct Access (disks)
135 device sa # Sequential Access (tape etc)
136 device cd # CD
137 device pass # Passthrough device (direct SCSI access)
139 # RAID controllers interfaced to the SCSI subsystem
140 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
141 device dpt # DPT Smartcache - See LINT for options!
142 device iir # Intel Integrated RAID
143 device mly # Mylex AcceleRAID/eXtremeRAID
144 device ciss # Compaq SmartRAID 5* series
146 # RAID controllers
147 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
148 #device aacp # SCSI passthrough for aac (requires CAM)
149 device ida # Compaq Smart RAID
150 device ips # IBM ServeRAID
151 device amr # AMI MegaRAID
152 device mlx # Mylex DAC960 family
153 device twe # 3ware Escalade 7000/8000's
154 device twa # 3ware Escalade 9000's
155 device pst # Promise Supertrack
157 # atkbdc0 controls both the keyboard and the PS/2 mouse
158 device atkbdc0 at isa? port IO_KBD
159 device atkbd0 at atkbdc? irq 1 flags 0x1
160 device psm0 at atkbdc? irq 12
162 device vga0 at isa?
164 # splash screen/screen saver
165 pseudo-device splash
167 # syscons is the default console driver, resembling an SCO console
168 device sc0 at isa? flags 0x100
169 options SC_PIXEL_MODE # add support for the raster text mode
171 device agp # support several AGP chipsets
173 # Floating point support - do not disable.
174 device npx0 at nexus? port IO_NPX irq 13
176 # Power management support (see LINT for more options)
177 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
179 # HW monitoring devices
180 device lm0 at isa? port 0x290
181 device it0 at isa? port 0x290
182 device it1 at isa? port 0xc00
183 device it2 at isa? port 0xd00
185 # PCCARD (PCMCIA) support
186 device pccard
187 device cardbus
188 device cbb
190 # Serial (COM) ports
191 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
192 device sio1 at isa? port IO_COM2 irq 3
193 device sio2 at isa? disable port IO_COM3 irq 5
194 device sio3 at isa? disable port IO_COM4 irq 9
196 # Parallel port
197 device ppc0 at isa? irq 7
198 device ppbus # Parallel port bus (required)
199 device lpt # Printer
200 device plip # TCP/IP over parallel
201 device ppi # Parallel port interface device
202 #device vpo # Requires scbus and da
205 # PCI Ethernet NICs.
206 device de # DEC/Intel DC21x4x (``Tulip'')
207 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
208 device txp # 3Com 3cR990 (``Typhoon'')
209 device vx # 3Com 3c590, 3c595 (``Vortex'')
211 # PCI Ethernet NICs that use the common MII bus controller code.
212 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
213 device miibus # MII bus support
214 device bce # Broadcom NetXtreme II Gigabit Ethernet
215 device bfe # Broadcom BCM440x 10/100 Ethernet
216 device dc # DEC/Intel 21143 and various workalikes
217 device et # Agere ET1310 10/100/1000 Ethernet
218 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
219 device pcn # AMD Am79C97x PCI 10/100 NICs
220 device rl # RealTek 8129/8139
221 device re # RealTek 8139C+/8169
222 device sf # Adaptec AIC-6915 (``Starfire'')
223 device sis # Silicon Integrated Systems SiS 900/SiS 7016
224 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
225 device ste # Sundance ST201 (D-Link DFE-550TX)
226 device tl # Texas Instruments ThunderLAN
227 device tx # SMC EtherPower II (83c170 ``EPIC'')
228 device vge # VIA 612x GigE
229 device vr # VIA Rhine, Rhine II
230 device wb # Winbond W89C840F
231 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
232 device bge # Broadcom BCM570x (``Tigon III'')
233 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
234 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
236 # ISA Ethernet NICs.
237 # 'device ed' requires 'device miibus'
238 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
239 device ex
240 device ep
241 device fe0 at isa? disable port 0x300
242 # Xircom Ethernet
243 device xe
245 # Wireless NIC cards
246 device wlan # 802.11 support
247 device wlan_ccmp # 802.11 CCMP support
248 device wlan_tkip # 802.11 TKIP support
249 device wlan_wep # 802.11 WEP support
250 # 802.11 TX rate control algorithms
251 #device wlan_ratectl_amrr # AMRR
252 device wlan_ratectl_onoe # Onoe
253 device wlan_ratectl_sample # Sample
255 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
256 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
257 # mode (the factory default). If you set the switches on your ISA
258 # card for a manually chosen I/O address and IRQ, you must specify
259 # those parameters here.
260 device an
261 device ral # Ralink Technology 802.11 wireless NIC
262 # Requires wlan_ratectl_onoe and
263 # wlan_ratectl_sample
264 device rtw # RealTek 802.11 wireless NIC
265 # Requires wlan_ratectl_onoe and wlan_wep
266 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
267 # exists only as a PCMCIA device, so there is no ISA attachment needed
268 # and resources will always be dynamically assigned by the pccard code.
269 device wi
271 # The probe order of these is presently determined by i386/isa/isa_compat.c.
272 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
273 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
274 device lnc0 at isa? disable port 0x280 irq 10 drq 0
275 device cs0 at isa? disable port 0x300
276 device sn0 at isa? disable port 0x300 irq 10
278 # Pseudo devices - the number indicates how many units to allocate.
279 pseudo-device loop # Network loopback
280 pseudo-device ether # Ethernet support
281 pseudo-device sl 1 # Kernel SLIP
282 pseudo-device ppp 1 # Kernel PPP
283 pseudo-device tun # Packet tunnel.
284 pseudo-device pty # Pseudo-ttys (telnet etc)
285 pseudo-device md # Memory "disks"
286 pseudo-device gif # IPv6 and IPv4 tunneling
287 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
289 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
290 # Be aware of the administrative consequences of enabling this!
291 pseudo-device bpf #Berkeley packet filter
293 pseudo-device crypto # core crypto support, used by wlan
295 # USB support
296 device uhci # UHCI PCI->USB interface
297 device ohci # OHCI PCI->USB interface
298 device usb # USB Bus (required)
299 device ugen # Generic
300 device uhid # "Human Interface Devices"
301 device ukbd # Keyboard
302 device ulpt # Printer
303 device umass # Disks/Mass storage - Requires scbus and da
304 device ums # Mouse
305 device uscanner # Scanners
306 device urio # Diamond Rio MP3 Player
307 # USB Ethernet, requires mii
308 device aue # ADMtek USB ethernet
309 device axe # ASIX Electronics USB Ethernet
310 device cue # CATC USB ethernet
311 device kue # Kawasaki LSI USB ethernet
312 device rue # RealTek 8150 based USB ethernet
313 # USB wireless NICs, requires wlan, wlan_ratectl_onoe
314 device rum # Ralink Technology RT2501USB/RT2601USB
315 device ural # Ralink Technology RT2500USB
317 # FireWire support
318 device firewire # FireWire bus code
319 device sbp # SCSI over FireWire (Requires scbus and da)
320 device fwe # Ethernet over FireWire (non-standard!)