Remove empty DragonFly CVS IDs.

[dragonfly.git] / sys / dev / netif / ath / hal / ath_hal / ar5212 / ar5212phy.h

/*
 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $Id: ar5212phy.h,v 1.7 2008/11/19 21:23:01 sam Exp $
 */
#ifndef _DEV_ATH_AR5212PHY_H_
#define _DEV_ATH_AR5212PHY_H_

/* PHY registers */
#define AR_PHY_BASE             0x9800          /* base address of phy regs */
#define AR_PHY(_n)              (AR_PHY_BASE + ((_n)<<2))

#define AR_PHY_TEST             0x9800          /* PHY test control */
#define PHY_AGC_CLR             0x10000000      /* disable AGC to A2 */

#define AR_PHY_TESTCTRL         0x9808          /* PHY Test Control/Status */
#define AR_PHY_TESTCTRL_TXHOLD  0x3800          /* Select Tx hold */
#define AR_PHY_TESTCTRL_TXSRC_ALT       0x00000080      /* Select input to tsdac along with bit 1 */
#define AR_PHY_TESTCTRL_TXSRC_ALT_S     7
#define AR_PHY_TESTCTRL_TXSRC_SRC       0x00000002      /* Used with bit 7 */
#define AR_PHY_TESTCTRL_TXSRC_SRC_S     1

#define AR_PHY_TURBO            0x9804          /* frame control register */
#define AR_PHY_FC_TURBO_MODE    0x00000001      /* Set turbo mode bits */
#define AR_PHY_FC_TURBO_SHORT   0x00000002      /* Set short symbols to turbo mode setting */
#define AR_PHY_FC_TURBO_MIMO    0x00000004      /* Set turbo for mimo mode */

#define AR_PHY_TIMING3          0x9814          /* Timing control 3 */
#define AR_PHY_TIMING3_DSC_MAN  0xFFFE0000
#define AR_PHY_TIMING3_DSC_MAN_S        17
#define AR_PHY_TIMING3_DSC_EXP  0x0001E000
#define AR_PHY_TIMING3_DSC_EXP_S        13

#define AR_PHY_CHIP_ID          0x9818          /* PHY chip revision ID */
#define AR_PHY_CHIP_ID_REV_2    0x42            /* 5212 Rev 2 BB w. TPC fix */
#define AR_PHY_CHIP_ID_REV_3    0x43            /* 5212 Rev 3 5213 */
#define AR_PHY_CHIP_ID_REV_4    0x44            /* 5212 Rev 4 2313 and up */

#define AR_PHY_ACTIVE           0x981C          /* activation register */
#define AR_PHY_ACTIVE_EN        0x00000001      /* Activate PHY chips */
#define AR_PHY_ACTIVE_DIS       0x00000000      /* Deactivate PHY chips */

#define AR_PHY_TX_CTL           0x9824
#define AR_PHY_TX_FRAME_TO_TX_DATA_START        0x0000000f
#define AR_PHY_TX_FRAME_TO_TX_DATA_START_S      0

#define AR_PHY_ADC_CTL          0x982C
#define AR_PHY_ADC_CTL_OFF_INBUFGAIN    0x00000003
#define AR_PHY_ADC_CTL_OFF_INBUFGAIN_S  0
#define AR_PHY_ADC_CTL_OFF_PWDDAC       0x00002000
#define AR_PHY_ADC_CTL_OFF_PWDBANDGAP   0x00004000 /* BB Rev 4.2+ only */
#define AR_PHY_ADC_CTL_OFF_PWDADC       0x00008000 /* BB Rev 4.2+ only */
#define AR_PHY_ADC_CTL_ON_INBUFGAIN     0x00030000
#define AR_PHY_ADC_CTL_ON_INBUFGAIN_S   16

#define AR_PHY_BB_XP_PA_CTL     0x9838
#define AR_PHY_BB_XPAA_ACTIVE_HIGH      0x00000001
#define AR_PHY_BB_XPAB_ACTIVE_HIGH      0x00000002
#define AR_PHY_BB_XPAB_ACTIVE_HIGH_S    1

#define AR_PHY_TSTDAC_CONST     0x983C
#define AR_PHY_TSTDAC_CONST_Q   0x0003FE00
#define AR_PHY_TSTDAC_CONST_Q_S 9
#define AR_PHY_TSTDAC_CONST_I   0x000001FF


#define AR_PHY_SETTLING         0x9844
#define AR_PHY_SETTLING_AGC 0x0000007F
#define AR_PHY_SETTLING_AGC_S   0
#define AR_PHY_SETTLING_SWITCH  0x00003F80
#define AR_PHY_SETTLING_SWITCH_S        7

#define AR_PHY_RXGAIN           0x9848
#define AR_PHY_RXGAIN_TXRX_ATTEN        0x0003F000
#define AR_PHY_RXGAIN_TXRX_ATTEN_S      12
#define AR_PHY_RXGAIN_TXRX_RF_MAX       0x007C0000
#define AR_PHY_RXGAIN_TXRX_RF_MAX_S     18

#define AR_PHY_DESIRED_SZ       0x9850
#define AR_PHY_DESIRED_SZ_ADC           0x000000FF
#define AR_PHY_DESIRED_SZ_ADC_S         0
#define AR_PHY_DESIRED_SZ_PGA           0x0000FF00
#define AR_PHY_DESIRED_SZ_PGA_S         8
#define AR_PHY_DESIRED_SZ_TOT_DES       0x0FF00000
#define AR_PHY_DESIRED_SZ_TOT_DES_S     20

#define AR_PHY_FIND_SIG          0x9858
#define AR_PHY_FIND_SIG_FIRSTEP  0x0003F000
#define AR_PHY_FIND_SIG_FIRSTEP_S                12
#define AR_PHY_FIND_SIG_FIRPWR   0x03FC0000
#define AR_PHY_FIND_SIG_FIRPWR_S                 18

#define AR_PHY_AGC_CTL1          0x985C
#define AR_PHY_AGC_CTL1_COARSE_LOW               0x00007F80
#define AR_PHY_AGC_CTL1_COARSE_LOW_S             7
#define AR_PHY_AGC_CTL1_COARSE_HIGH              0x003F8000
#define AR_PHY_AGC_CTL1_COARSE_HIGH_S            15

#define AR_PHY_AGC_CONTROL      0x9860          /* chip calibration and noise floor setting */
#define AR_PHY_AGC_CONTROL_CAL  0x00000001      /* do internal calibration */
#define AR_PHY_AGC_CONTROL_NF   0x00000002      /* do noise-floor calculation */
#define AR_PHY_AGC_CONTROL_ENABLE_NF     0x00008000 /* Enable noise floor calibration to happen */
#define AR_PHY_AGC_CONTROL_FLTR_CAL     0x00010000  /* Allow Filter calibration */
#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF  0x00020000 /* Don't update noise floor automatically */

#define AR_PHY_SFCORR_LOW        0x986C
#define AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW      0x00000001
#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW        0x00003F00
#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW_S      8
#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW  0x001FC000
#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW_S        14
#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW  0x0FE00000
#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW_S        21

#define AR_PHY_SFCORR           0x9868
#define AR_PHY_SFCORR_M2COUNT_THR        0x0000001F
#define AR_PHY_SFCORR_M2COUNT_THR_S      0
#define AR_PHY_SFCORR_M1_THRESH  0x00FE0000
#define AR_PHY_SFCORR_M1_THRESH_S        17
#define AR_PHY_SFCORR_M2_THRESH  0x7F000000
#define AR_PHY_SFCORR_M2_THRESH_S        24

#define AR_PHY_SLEEP_CTR_CONTROL        0x9870
#define AR_PHY_SLEEP_CTR_LIMIT          0x9874
#define AR_PHY_SLEEP_SCAL               0x9878

#define AR_PHY_PLL_CTL          0x987c  /* PLL control register */
#define AR_PHY_PLL_CTL_40       0xaa    /* 40 MHz */
#define AR_PHY_PLL_CTL_44       0xab    /* 44 MHz for 11b, 11g */
#define AR_PHY_PLL_CTL_44_5112  0xeb    /* 44 MHz for 11b, 11g */
#define AR_PHY_PLL_CTL_40_5112  0xea    /* 40 MHz for 11a, turbos */
#define AR_PHY_PLL_CTL_40_5413  0x04    /* 40 MHz for 11a, turbos with 5413 */
#define AR_PHY_PLL_CTL_HALF     0x100   /* Half clock for 1/2 chan width */
#define AR_PHY_PLL_CTL_QUARTER  0x200   /* Quarter clock for 1/4 chan width */

#define AR_PHY_BIN_MASK_1       0x9900
#define AR_PHY_BIN_MASK_2       0x9904
#define AR_PHY_BIN_MASK_3       0x9908

#define AR_PHY_MASK_CTL         0x990c          /* What are these for?? */
#define AR_PHY_MASK_CTL_MASK_4  0x00003FFF
#define AR_PHY_MASK_CTL_MASK_4_S        0
#define AR_PHY_MASK_CTL_RATE    0xFF000000
#define AR_PHY_MASK_CTL_RATE_S  24

#define AR_PHY_RX_DELAY         0x9914          /* analog pow-on time (100ns) */
#define AR_PHY_RX_DELAY_DELAY   0x00003FFF      /* delay from wakeup to rx ena */

#define AR_PHY_TIMING_CTRL4             0x9920          /* timing control */
#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF     0x01F   /* Mask for kcos_theta-1 for q correction */
#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF_S   0       /* shift for Q_COFF */
#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF     0x7E0   /* Mask for sin_theta for i correction */
#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF_S   5       /* Shift for sin_theta for i correction */
#define AR_PHY_TIMING_CTRL4_IQCORR_ENABLE       0x800   /* enable IQ correction */
#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX 0xF000  /* Mask for max number of samples (logarithmic) */
#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX_S       12      /* Shift for max number of samples */
#define AR_PHY_TIMING_CTRL4_DO_IQCAL    0x10000         /* perform IQ calibration */
#define AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER  0x40000000      /* Enable spur filter */
#define AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK    0x20000000
#define AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK   0x10000000

#define AR_PHY_TIMING5          0x9924
#define AR_PHY_TIMING5_CYCPWR_THR1      0x000000FE
#define AR_PHY_TIMING5_CYCPWR_THR1_S    1

#define AR_PHY_PAPD_PROBE       0x9930
#define AR_PHY_PAPD_PROBE_POWERTX       0x00007E00
#define AR_PHY_PAPD_PROBE_POWERTX_S     9
#define AR_PHY_PAPD_PROBE_NEXT_TX       0x00008000      /* command to take next reading */
#define AR_PHY_PAPD_PROBE_TYPE  0x01800000
#define AR_PHY_PAPD_PROBE_TYPE_S        23
#define AR_PHY_PAPD_PROBE_TYPE_OFDM     0
#define AR_PHY_PAPD_PROBE_TYPE_CCK      2
#define AR_PHY_PAPD_PROBE_GAINF 0xFE000000
#define AR_PHY_PAPD_PROBE_GAINF_S       25

#define AR_PHY_POWER_TX_RATE1   0x9934
#define AR_PHY_POWER_TX_RATE2   0x9938
#define AR_PHY_POWER_TX_RATE_MAX        0x993c
#define AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE     0x00000040

#define AR_PHY_FRAME_CTL        0x9944
#define AR_PHY_FRAME_CTL_TX_CLIP        0x00000038
#define AR_PHY_FRAME_CTL_TX_CLIP_S      3
#define AR_PHY_FRAME_CTL_ERR_SERV       0x20000000
#define AR_PHY_FRAME_CTL_ERR_SERV_S     29
#define AR_PHY_FRAME_CTL_EMU_M          0x80000000
#define AR_PHY_FRAME_CTL_EMU_S          31
#define AR_PHY_FRAME_CTL_WINLEN         0x00000003
#define AR_PHY_FRAME_CTL_WINLEN_S       0

#define AR_PHY_TXPWRADJ         0x994C          /* BB Rev 4.2+ only */
#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA  0x00000FC0
#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA_S        6
#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX 0x00FC0000
#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX_S       18

#define AR_PHY_RADAR_0          0x9954          /* radar detection settings */
#define AR_PHY_RADAR_0_ENA      0x00000001      /* Enable radar detection */
#define AR_PHY_RADAR_0_INBAND   0x0000003e      /* Inband pulse threshold */
#define AR_PHY_RADAR_0_INBAND_S 1
#define AR_PHY_RADAR_0_PRSSI    0x00000FC0      /* Pulse rssi threshold */
#define AR_PHY_RADAR_0_PRSSI_S  6
#define AR_PHY_RADAR_0_HEIGHT   0x0003F000      /* Pulse height threshold */
#define AR_PHY_RADAR_0_HEIGHT_S 12
#define AR_PHY_RADAR_0_RRSSI    0x00FC0000      /* Radar rssi threshold */
#define AR_PHY_RADAR_0_RRSSI_S  18
#define AR_PHY_RADAR_0_FIRPWR   0x7F000000      /* Radar firpwr threshold */
#define AR_PHY_RADAR_0_FIRPWR_S 24


#define AR_PHY_SIGMA_DELTA      0x996C      /* AR5312 only */
#define AR_PHY_SIGMA_DELTA_ADC_SEL      0x00000003
#define AR_PHY_SIGMA_DELTA_ADC_SEL_S    0
#define AR_PHY_SIGMA_DELTA_FILT2        0x000000F8
#define AR_PHY_SIGMA_DELTA_FILT2_S      3
#define AR_PHY_SIGMA_DELTA_FILT1        0x00001F00
#define AR_PHY_SIGMA_DELTA_FILT1_S      8
#define AR_PHY_SIGMA_DELTA_ADC_CLIP     0x01FFE000
#define AR_PHY_SIGMA_DELTA_ADC_CLIP_S   13

#define AR_PHY_RESTART          0x9970          /* restart */
#define AR_PHY_RESTART_DIV_GC   0x001C0000      /* bb_ant_fast_div_gc_limit */
#define AR_PHY_RESTART_DIV_GC_S 18

#define AR_PHY_RFBUS_REQ    0x997C
#define AR_PHY_RFBUS_REQ_REQUEST    0x00000001

#define AR_PHY_TIMING7          0x9980          /* Spur mitigation masks */
#define AR_PHY_TIMING8          0x9984
#define AR_PHY_TIMING8_PILOT_MASK_2     0x000FFFFF
#define AR_PHY_TIMING8_PILOT_MASK_2_S   0

#define AR_PHY_BIN_MASK2_1      0x9988
#define AR_PHY_BIN_MASK2_2      0x998c
#define AR_PHY_BIN_MASK2_3      0x9990
#define AR_PHY_BIN_MASK2_4      0x9994
#define AR_PHY_BIN_MASK2_4_MASK_4       0x00003FFF
#define AR_PHY_BIN_MASK2_4_MASK_4_S     0

#define AR_PHY_TIMING9          0x9998
#define AR_PHY_TIMING10         0x999c
#define AR_PHY_TIMING10_PILOT_MASK_2    0x000FFFFF
#define AR_PHY_TIMING10_PILOT_MASK_2_S  0

#define AR_PHY_TIMING11                 0x99a0          /* Spur Mitigation control */
#define AR_PHY_TIMING11_SPUR_DELTA_PHASE        0x000FFFFF
#define AR_PHY_TIMING11_SPUR_DELTA_PHASE_S      0
#define AR_PHY_TIMING11_SPUR_FREQ_SD            0x3FF00000
#define AR_PHY_TIMING11_SPUR_FREQ_SD_S          20
#define AR_PHY_TIMING11_USE_SPUR_IN_AGC         0x40000000
#define AR_PHY_TIMING11_USE_SPUR_IN_SELFCOR     0x80000000

#define AR_PHY_HEAVY_CLIP_ENABLE        0x99E0

#define AR_PHY_M_SLEEP          0x99f0          /* sleep control registers */
#define AR_PHY_REFCLKDLY        0x99f4
#define AR_PHY_REFCLKPD         0x99f8

/* PHY IQ calibration results */
#define AR_PHY_IQCAL_RES_PWR_MEAS_I     0x9c10  /* power measurement for I */
#define AR_PHY_IQCAL_RES_PWR_MEAS_Q     0x9c14  /* power measurement for Q */
#define AR_PHY_IQCAL_RES_IQ_CORR_MEAS   0x9c18  /* IQ correlation measurement */

#define AR_PHY_CURRENT_RSSI     0x9c1c          /* rssi of current frame rx'd */

#define AR_PHY_RFBUS_GNT    0x9c20
#define AR_PHY_RFBUS_GNT_GRANT  0x1
                                                                                          
#define AR_PHY_PCDAC_TX_POWER_0 0xA180
#define AR_PHY_PCDAC_TX_POWER(_n)       (AR_PHY_PCDAC_TX_POWER_0 + ((_n)<<2))

#define AR_PHY_MODE             0xA200  /* Mode register */
#define AR_PHY_MODE_QUARTER     0x40    /* Quarter Rate */
#define AR_PHY_MODE_HALF        0x20    /* Half Rate */
#define AR_PHY_MODE_AR5112      0x08    /* AR5112 */
#define AR_PHY_MODE_AR5111      0x00    /* AR5111/AR2111 */
#define AR_PHY_MODE_DYNAMIC     0x04    /* dynamic CCK/OFDM mode */
#define AR_PHY_MODE_RF2GHZ      0x02    /* 2.4 GHz */
#define AR_PHY_MODE_RF5GHZ      0x00    /* 5 GHz */
#define AR_PHY_MODE_CCK         0x01    /* CCK */
#define AR_PHY_MODE_OFDM        0x00    /* OFDM */
#define AR_PHY_MODE_DYN_CCK_DISABLE 0x100 /* Disable dynamic CCK detection */

#define AR_PHY_CCK_TX_CTRL      0xA204
#define AR_PHY_CCK_TX_CTRL_JAPAN        0x00000010

#define AR_PHY_CCK_DETECT       0xA208
#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK      0x0000003F
#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK_S    0
#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV        0x2000

#define AR_PHY_GAIN_2GHZ        0xA20C
#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN    0x00FC0000
#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN_S  18

#define AR_PHY_CCK_RXCTRL4      0xA21C
#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT       0x01F80000
#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT_S     19

#define AR_PHY_DAG_CTRLCCK      0xA228
#define AR_PHY_DAG_CTRLCCK_EN_RSSI_THR  0x00000200 /* BB Rev 4.2+ only */
#define AR_PHY_DAG_CTRLCCK_RSSI_THR     0x0001FC00 /* BB Rev 4.2+ only */
#define AR_PHY_DAG_CTRLCCK_RSSI_THR_S   10         /* BB Rev 4.2+ only */

#define AR_PHY_POWER_TX_RATE3   0xA234
#define AR_PHY_POWER_TX_RATE4   0xA238

#define AR_PHY_FAST_ADC         0xA24C
#define AR_PHY_BLUETOOTH        0xA254

#define AR_PHY_TPCRG1   0xA258  /* ar2413 power control */
#define AR_PHY_TPCRG1_NUM_PD_GAIN       0x0000c000
#define AR_PHY_TPCRG1_NUM_PD_GAIN_S     14
#define AR_PHY_TPCRG1_PDGAIN_SETTING1   0x00030000
#define AR_PHY_TPCRG1_PDGAIN_SETTING1_S 16
#define AR_PHY_TPCRG1_PDGAIN_SETTING2   0x000c0000
#define AR_PHY_TPCRG1_PDGAIN_SETTING2_S 18
#define AR_PHY_TPCRG1_PDGAIN_SETTING3   0x00300000
#define AR_PHY_TPCRG1_PDGAIN_SETTING3_S 20

#define AR_PHY_TPCRG5   0xA26C /* ar2413 power control */
#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP   0x0000000F
#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP_S         0
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1        0x000003F0
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1_S      4
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2        0x0000FC00
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2_S      10
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3        0x003F0000
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3_S      16
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4        0x0FC00000
#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4_S      22

#endif  /* _DEV_ATH_AR5212PHY_H_ */