Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
   4 #
   5 # Build-time options are documented in make.conf(5).
   6 #
   7 # The intended user-driven targets are:
   8 #
   9 # buildworld  - rebuild *everything*, including glue to help do upgrades
  10 # quickworld  - skip the glue and do a depend+build on the meat
  11 # realquickworld - skip the glue and depend stages and just build the meat
  12 # crossworld  - only build the glue (particularly the cross-build environment)
  13 # installworld- install everything built by "buildworld"
  14 # most        - build user commands, no libraries or include files
  15 # installmost - install user commands, no libraries or include files
  16 #
  17 # Standard targets (not defined here) are documented in the makefiles in
  18 # /usr/share/mk.  These include:
  19 #               obj depend all install clean cleandepend cleanobj
  20
  21 # Put initial settings here.
  22 SUBDIR=
  23
  24 # We must do share/info early so that installation of info `dir'
  25 # entries works correctly.  Do it first since it is less likely to
  26 # grow dependencies on include and lib than vice versa.
  27 .if exists(${.CURDIR}/share/info)
  28 SUBDIR+= share/info
  29 .endif
  30
  31 # We must do include and lib early so that the perl *.ph generation
  32 # works correctly as it uses the header files installed by this.
  33 .if exists(${.CURDIR}/include)
  34 SUBDIR+= include
  35 .endif
  36 .if exists(${.CURDIR}/lib)
  37 SUBDIR+= lib
  38 .endif
  39 # This exists simply to ensure that the obj dir hierarchy is
  40 # intact for nrelease, allowing the nrelease Makefile's to
  41 # reference ${.OBJDIR}.
  42 #
  43 .if exists(${.CURDIR}/nrelease)
  44 SUBDIR+= nrelease
  45 .endif
  46
  47 .if exists(${.CURDIR}/bin)
  48 SUBDIR+= bin
  49 .endif
  50 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  51 SUBDIR+= games
  52 .endif
  53 .if exists(${.CURDIR}/gnu)
  54 SUBDIR+= gnu
  55 .endif
  56 .if exists(${.CURDIR}/libexec)
  57 SUBDIR+= libexec
  58 .endif
  59 .if exists(${.CURDIR}/sbin)
  60 SUBDIR+= sbin
  61 .endif
  62 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
  63 SUBDIR+= secure
  64 .endif
  65 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  66 SUBDIR+= share
  67 .endif
  68 .if exists(${.CURDIR}/sys)
  69 SUBDIR+= sys
  70 .endif
  71 .if exists(${.CURDIR}/usr.bin)
  72 SUBDIR+= usr.bin
  73 .endif
  74 .if exists(${.CURDIR}/usr.sbin)
  75 SUBDIR+= usr.sbin
  76 .endif
  77
  78 .if exists(${.CURDIR}/etc)
  79 SUBDIR+= etc
  80 .endif
  81
  82 # These are last, since it is nice to at least get the base system
  83 # rebuilt before you do them.
  84 .if defined(LOCAL_DIRS)
  85 .for _DIR in ${LOCAL_DIRS}
  86 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  87 SUBDIR+= ${_DIR}
  88 .endif
  89 .endfor
  90 .endif
  91
  92 .if defined(SUBDIR_OVERRIDE)
  93 SUBDIR=         ${SUBDIR_OVERRIDE}
  94 .endif
  95
  96 .if defined(NOCLEANDIR)
  97 CLEANDIR=       clean cleandepend
  98 .else
  99 CLEANDIR=       cleandir
 100 .endif
 101
 102 .if defined(NO_CLEAN)
 103 NOCLEAN=        # defined
 104 .endif
 105
 106 # Object directory base in primary make.  Note that when we rerun make
 107 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 108 # subdirectory because the rest of the build system needs it that way.
 109 # The original object directory base is saved in OBJTREE.
 110 #
 111 MAKEOBJDIRPREFIX?=      /usr/obj
 112 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 113
 114 # Used for stage installs and pathing
 115 #
 116 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 117
 118 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 119 # anyhow, and we need to be able to override it for stage installs
 120 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 121
 122 # This sets the compiler we use to build the world/kernel with
 123 WORLD_CCVER?=   gcc41
 124 WORLD_BINUTILSVER?=     binutils217
 125
 126 # temporary until everybody has converted to x86_64
 127 .if ${MACHINE_ARCH} == "amd64"
 128 MACHINE_ARCH=   x86_64
 129 .makeenv MACHINE_ARCH
 130 .endif
 131
 132 TARGET_ARCH?=   ${MACHINE_ARCH}
 133 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 134 TARGET?=        ${MACHINE}
 135 .else
 136 TARGET?=        ${TARGET_ARCH}
 137 .endif
 138 .if make(buildworld)
 139 BUILD_ARCH!=    sysctl -n hw.machine_arch
 140
 141 # temporary until everybody has converted to x86_64
 142 .if ${BUILD_ARCH} == "amd64"
 143 BUILD_ARCH=     x86_64
 144 .endif
 145
 146 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 147 .error To cross-build, set TARGET_ARCH.
 148 .endif
 149 .endif
 150
 151 # Backwards compatibility with older make's or older sys.mk's.  make
 152 # is expected to define MACHINE_PLATFORM.
 153 #
 154 .if !defined(MACHINE_PLATFORM)
 155 MACHINE_PLATFORM= pc32
 156 .endif
 157
 158 # XXX this is ugly and we need to come up with a nicer solution
 159 .if !defined(TARGET_PLATFORM)
 160 .if ${TARGET_ARCH} == "i386"
 161 TARGET_PLATFORM= pc32
 162 .elif ${TARGET_ARCH} == "x86_64"
 163 TARGET_PLATFORM= pc64
 164 .else
 165 .error Unknown target architecture.
 166 .endif
 167 .endif
 168
 169 THREAD_LIB?=    thread_xu
 170 .if ${THREAD_LIB} == "c_r"
 171 .if defined(NO_LIBC_R)
 172 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
 173 .endif
 174 .endif
 175
 176 # BTOOLS        (Natively built) All non-cross-development tools that the
 177 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 178 #               We will not use the native system's exec path once we start
 179 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 180 #
 181 # CTOOLS        (Natively built) Cross development tools which are specific
 182 #               to the target architecture.
 183 #
 184 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 185 #               CTOOLS.
 186 #
 187 # MACHINE_PLATFORM Platform Architecture we are building on
 188 # MACHINE       Machine Architecture (usually the same as MACHINE_ARCH)
 189 # MACHINE_ARCH  Cpu Architecture we are building on
 190 #
 191 # TARGET_PLATFORM Platform Architecture we are building for
 192 # TARGET        Machine Architecture we are building for
 193 # TARGET_ARCH   Cpu Architecture we are building for
 194 #
 195 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 196 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 197 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 198
 199 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 200 # cross-tools stages to augment the existing command path to access newer
 201 # versions of certain utilities such as 'patch' that the cross-tools stage
 202 # might expect.
 203 #
 204 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 205
 206 # The strict temporary command path contains all binaries required
 207 # by the buildworld system after the cross-tools stage.
 208 #
 209 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 210
 211 TMPDIR?=        /tmp
 212 TMPPID!=        echo $$$$
 213
 214 #
 215 # Building a world goes through the following stages
 216 #
 217 # 1. bootstrap-tool stage [BMAKE]
 218 #       This stage is responsible for creating programs that
 219 #       are needed for backward compatibility reasons. They
 220 #       are not built as cross-tools.
 221 # 2. build-tool stage [TMAKE]
 222 #       This stage is responsible for creating the object
 223 #       tree and building any tools that are needed during
 224 #       the build process.
 225 # 3. cross-tool stage [XMAKE]
 226 #       This stage is responsible for creating any tools that
 227 #       are needed for cross-builds. A cross-compiler is one
 228 #       of them.
 229 # 4. world stage [WMAKE]
 230 #       This stage actually builds the world.
 231 # 5. install stage (optional) [IMAKE]
 232 #       This stage installs a previously built world.
 233 #
 234
 235 # bootstrap-tool stage
 236 #
 237 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 238                 OBJTREE=${OBJTREE} \
 239                 DESTDIR=${BTOOLSDEST} \
 240                 PATH=${BTOOLSPATH}:${PATH} \
 241                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 242
 243 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 244                 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 245                 -DNO_WERROR -DNO_NLS
 246
 247 # build-tool stage
 248 #
 249 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 250                 OBJTREE=${OBJTREE} \
 251                 DESTDIR= \
 252                 PATH=${BTOOLSPATH}:${PATH} \
 253                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 254
 255 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 256                 -DNO_FORTRAN -DNOSHARED
 257
 258 # cross-tool stage
 259 #
 260 # note: TOOLS_PREFIX points to the obj root holding the cross
 261 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 262 #       holding the target environment (and also determines where cross-built
 263 #       libraries, crt*.o, and include files are installed).
 264 #
 265 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 266                 OBJTREE=${OBJTREE} \
 267                 DESTDIR=${CTOOLSDEST} \
 268                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 269                 TOOLS_PREFIX=${CTOOLSDEST} \
 270                 USRDATA_PREFIX=${WORLDDEST} \
 271                 PATH=${BTOOLSPATH}:${PATH}
 272
 273 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 274                 -DBOOTSTRAPPING -DNOSHARED
 275
 276 # world stage, note the strict path and note that TOOLS_PREFIX is left
 277 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 278 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 279 # for both binary and library paths, even though it is being compiled to
 280 # WORLDDEST.  None of the programs in the world stage are ever actually
 281 # executed during the buildworld/installworld.
 282 #
 283 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 284                 OBJTREE=${OBJTREE} \
 285                 MACHINE_ARCH=${TARGET_ARCH} \
 286                 MACHINE=${TARGET} \
 287                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 288                 OBJFORMAT_PATH=${CTOOLSDEST} \
 289                 HOST_CCVER=${HOST_CCVER} \
 290                 CCVER=${WORLD_CCVER} \
 291                 BINUTILSVER=${WORLD_BINUTILSVER}
 292
 293 WMAKEENV=       ${CROSSENV} \
 294                 DESTDIR=${WORLDDEST} \
 295                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 296                 PATH=${STRICTTMPPATH}
 297
 298 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 299
 300 # install stage
 301 #
 302 IMAKEENV=       ${CROSSENV} \
 303                 PATH=${STRICTTMPPATH}
 304 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 305
 306 # kernel stage
 307 #
 308 KMAKEENV=       ${WMAKEENV}
 309
 310 # buildworld
 311 #
 312 # Attempt to rebuild the entire system, with reasonable chance of
 313 # success, regardless of how old your existing system is.
 314 #
 315 _worldtmp: _cleantmp _mtreetmp
 316 .ORDER: _cleantmp _mtreetmp
 317
 318 _cleantmp:
 319         @echo
 320         @echo "--------------------------------------------------------------"
 321         @echo ">>> Rebuilding the temporary build tree"
 322         @echo "--------------------------------------------------------------"
 323 .if !defined(NOCLEAN)
 324         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 325 .else
 326         # XXX - These two can depend on any header file.
 327         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 328         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 329 .endif
 330
 331 _mtreetmp:
 332         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 333 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 334         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 335                 -p ${_dir}/  > /dev/null
 336         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 337                 -p ${_dir}/usr > /dev/null
 338 .endfor
 339         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 340                 -p ${WORLDDEST}/usr/include > /dev/null
 341         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 342
 343 _bootstrap-tools:
 344         @echo
 345         @echo "--------------------------------------------------------------"
 346         @echo ">>> stage 1: bootstrap tools"
 347         @echo "--------------------------------------------------------------"
 348         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 349 _cleanobj:
 350         @echo
 351         @echo "--------------------------------------------------------------"
 352         @echo ">>> stage 2a: cleaning up the object tree"
 353         @echo "--------------------------------------------------------------"
 354         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 355 _obj:
 356         @echo
 357         @echo "--------------------------------------------------------------"
 358         @echo ">>> stage 2b: rebuilding the object tree"
 359         @echo "--------------------------------------------------------------"
 360         cd ${.CURDIR}; ${WMAKE} par-obj
 361 _build-tools:
 362         @echo
 363         @echo "--------------------------------------------------------------"
 364         @echo ">>> stage 2c: build tools"
 365         @echo "--------------------------------------------------------------"
 366         cd ${.CURDIR}; ${TMAKE} build-tools
 367 _cross-tools:
 368         @echo
 369         @echo "--------------------------------------------------------------"
 370         @echo ">>> stage 3: cross tools"
 371         @echo "--------------------------------------------------------------"
 372         cd ${.CURDIR}; ${XMAKE} cross-tools
 373 _includes:
 374         @echo
 375         @echo "--------------------------------------------------------------"
 376         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 377         @echo "--------------------------------------------------------------"
 378         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 379 _libraries:
 380         @echo
 381         @echo "--------------------------------------------------------------"
 382         @echo ">>> stage 4b: building libraries"
 383         @echo "--------------------------------------------------------------"
 384         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 385 _depend:
 386         @echo
 387         @echo "--------------------------------------------------------------"
 388         @echo ">>> stage 4c: make dependencies"
 389         @echo "--------------------------------------------------------------"
 390         cd ${.CURDIR}; ${WMAKE} par-depend
 391 everything:
 392         @echo
 393         @echo "--------------------------------------------------------------"
 394         @echo ">>> stage 4d: building everything.."
 395         @echo "--------------------------------------------------------------"
 396         cd ${.CURDIR}; ${WMAKE} all
 397
 398 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 399 # entire object tree and built the bootstrap tools in a different location.
 400 #
 401 # buildworld    - build everything from scratch
 402 # quickworld    - skip the bootstrap, build, and cross-build steps
 403 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 404 #
 405 # note: we include _obj in realquickworld to prevent accidental creation
 406 # of files in /usr/src.
 407
 408 WMAKE_TGTS=
 409 .if !defined(SUBDIR_OVERRIDE)
 410 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 411 .endif
 412 WMAKE_TGTS+=    _obj _build-tools
 413 .if !defined(SUBDIR_OVERRIDE)
 414 WMAKE_TGTS+=    _cross-tools
 415 .endif
 416 WMAKE_TGTS+=    _includes _libraries _depend everything
 417
 418 buildworld: ${WMAKE_TGTS}
 419
 420 quickworld: _mtreetmp _obj _includes _libraries _depend everything
 421
 422 realquickworld: _mtreetmp _obj _includes _libraries everything
 423
 424 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 425
 426 .ORDER: ${WMAKE_TGTS}
 427 .ORDER: _obj _includes
 428 .ORDER: _mtreetmp _obj
 429
 430 #
 431 # installcheck
 432 #
 433 # Checks to be sure system is ready for installworld
 434 #
 435 installcheck:
 436 .if !defined(NO_SENDMAIL)
 437         @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 438         @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 439 .endif
 440         @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 441         @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
 442         @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 443 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 444         @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
 445 .endif
 446 #
 447 # installworld
 448 #
 449 # Installs everything compiled by a 'buildworld'.
 450 #
 451 installworld: installcheck
 452         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 453         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
 454
 455 #
 456 # reinstall
 457 #
 458 # If you have a build server, you can NFS mount the source and obj directories
 459 # and do a 'make reinstall' on the *client* to install new binaries from the
 460 # most recent server build.
 461 #
 462 reinstall:
 463         @echo "--------------------------------------------------------------"
 464         @echo ">>> Making hierarchy"
 465         @echo "--------------------------------------------------------------"
 466         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 467         @echo
 468         @echo "--------------------------------------------------------------"
 469         @echo ">>> Installing everything.."
 470         @echo "--------------------------------------------------------------"
 471         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 472 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 473         @echo
 474         @echo "--------------------------------------------------------------"
 475         @echo ">>> Rebuilding man page indices"
 476         @echo "--------------------------------------------------------------"
 477         cd ${.CURDIR}/share/man; ${MAKE} makedb
 478 .endif
 479
 480 #
 481 # buildkernel, nativekernel, quickkernel, and installkernel
 482 #
 483 # Which kernels to build and/or install is specified by setting
 484 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 485 # Only the existing (depending TARGET) config files are used
 486 # for building kernels and only the first of these is designated
 487 # as the one being installed.
 488 #
 489 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 490 # kernel and modules to be stripped of its debug info (required
 491 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 492 # if you only want to strip the modules of their debug info.  These
 493 # only apply if you have DEBUG=-g in your kernel config or make line.
 494 #
 495 # Note that we have to use TARGET instead of TARGET_ARCH when
 496 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 497 # be set to cross-build, we have to make sure TARGET is set
 498 # properly.
 499
 500 .if !defined(KERNCONF) && defined(KERNEL)
 501 KERNCONF=       ${KERNEL}
 502 KERNWARN=       yes
 503 .else
 504 # XXX makeshift fix to build the right kernel for the (target) architecture
 505 # We should configure this in the platform files somehow
 506 .if ${TARGET_ARCH} == "i386"
 507 KERNCONF?=      GENERIC
 508 .else
 509 KERNCONF?=      X86_64_GENERIC
 510 .endif
 511 .endif
 512 INSTKERNNAME?=  kernel
 513
 514 KRNLSRCDIR=     ${.CURDIR}/sys
 515 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 516 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 517 KERNCONFDIR?=   ${KRNLCONFDIR}
 518
 519 BUILDKERNELS=
 520 INSTALLKERNEL=
 521 .for _kernel in ${KERNCONF}
 522 .if exists(${KERNCONFDIR}/${_kernel})
 523 BUILDKERNELS+=  ${_kernel}
 524 .if empty(INSTALLKERNEL)
 525 INSTALLKERNEL= ${_kernel}
 526 .endif
 527 .endif
 528 .endfor
 529
 530 # kernel version numbers survive rm -rf
 531 #
 532 .for _kernel in ${BUILDKERNELS}
 533 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 534 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 535 .endif
 536 .endfor
 537
 538 #
 539 # buildkernel
 540 #
 541 # Builds all kernels defined by BUILDKERNELS.
 542 #
 543 bk_tools:
 544         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 545             echo "You must buildworld before buildkernel.  If you wish"; \
 546             echo "to build a kernel using native tools, config it manually"; \
 547             echo "or use the nativekernel target if you are in a rush"; \
 548             exit 1; \
 549         fi
 550
 551 maybe_bk_tools:
 552 .for _kernel in ${BUILDKERNELS}
 553         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 554             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 555                 echo "The kernel was build using buildworld tools which no" ; \
 556                 echo "longer appear to exist, quickkernel failed!" ; \
 557                 exit 1; \
 558             fi; \
 559         fi
 560 .endfor
 561
 562 bk_build_list:
 563 .if empty(BUILDKERNELS)
 564         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 565         @echo ">>> Did you move your kernel configs from i386/conf to config/?"
 566         @false
 567 .endif
 568
 569 bk_kernwarn:
 570 .if defined(KERNWARN)
 571         @echo "--------------------------------------------------------------"
 572         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 573         @echo "--------------------------------------------------------------"
 574         @sleep 3
 575 .endif
 576         @echo
 577
 578 # The buildkernel target rebuilds the specified kernels from scratch
 579 # using the crossbuild tools generated by the last buildworld.  It is
 580 # the safest (but also the most time consuming) way to build a new kernel.
 581 #
 582 buildkernel:    bk_tools bk_build_list bk_kernwarn
 583 .for _kernel in ${BUILDKERNELS}
 584         @echo "--------------------------------------------------------------"
 585         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 586         @echo "--------------------------------------------------------------"
 587         @echo "===> ${_kernel}"
 588 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 589         rm -rf ${KRNLOBJDIR}/${_kernel}
 590 .else
 591         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 592                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 593                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 594 .endif
 595         mkdir -p ${KRNLOBJDIR}
 596 .if !defined(NO_KERNELCONFIG)
 597         cd ${KRNLCONFDIR}; \
 598                 PATH=${STRICTTMPPATH} \
 599                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 600                         ${KERNCONFDIR}/${_kernel}
 601 .endif
 602 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 603         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 604 .endif
 605         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 606 .if !defined(NO_KERNELDEPEND)
 607         cd ${KRNLOBJDIR}/${_kernel}; \
 608             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 609 .endif
 610         cd ${KRNLOBJDIR}/${_kernel}; \
 611             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 612         @echo "--------------------------------------------------------------"
 613         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 614         @echo "--------------------------------------------------------------"
 615 .endfor
 616
 617 # The nativekernel target rebuilds the specified kernels from scratch
 618 # using the system's standard compiler rather than using the crossbuild
 619 # tools generated by the last buildworld.  This is fairly safe if your
 620 # system is reasonable up-to-date.
 621 #
 622 nativekernel:   bk_build_list bk_kernwarn
 623 .for _kernel in ${BUILDKERNELS}
 624         @echo "--------------------------------------------------------------"
 625         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 626         @echo "--------------------------------------------------------------"
 627         @echo "===> ${_kernel}"
 628 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 629         rm -rf ${KRNLOBJDIR}/${_kernel}
 630 .else
 631         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 632                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 633                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 634 .endif
 635         mkdir -p ${KRNLOBJDIR}
 636 .if !defined(NO_KERNELCONFIG)
 637         cd ${KRNLCONFDIR}; \
 638                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 639                         ${KERNCONFDIR}/${_kernel}
 640 .endif
 641 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 642         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 643 .endif
 644         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 645         cd ${KRNLOBJDIR}/${_kernel}; \
 646             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 647             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 648 .if !defined(NO_KERNELDEPEND)
 649         cd ${KRNLOBJDIR}/${_kernel}; \
 650             ${MAKE} KERNEL=${INSTKERNNAME} depend
 651 .endif
 652         cd ${KRNLOBJDIR}/${_kernel}; \
 653             ${MAKE} KERNEL=${INSTKERNNAME} all
 654         @echo "--------------------------------------------------------------"
 655         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 656         @echo "--------------------------------------------------------------"
 657 .endfor
 658
 659 # The quickkernel target rebuilds the specified kernels as quickly
 660 # as possible.  It will use the native tools or the buildworld cross tools
 661 # based on whether the kernel was originally generated via buildkernel or
 662 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 663 # nor is the make depend step run.
 664 #
 665 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 666 .for _kernel in ${BUILDKERNELS}
 667         @echo "--------------------------------------------------------------"
 668         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 669         @echo "--------------------------------------------------------------"
 670         @echo "===> ${_kernel}"
 671 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 672 .if !defined(NO_KERNELCONFIG)
 673         cd ${KRNLCONFDIR}; \
 674                 PATH=${STRICTTMPPATH} \
 675                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 676                         ${KERNCONFDIR}/${_kernel}
 677 .endif
 678         cd ${KRNLOBJDIR}/${_kernel}; \
 679             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 680 .else
 681 .if !defined(NO_KERNELCONFIG)
 682         cd ${KRNLCONFDIR}; \
 683             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 684                 ${KERNCONFDIR}/${_kernel}
 685 .endif
 686         cd ${KRNLOBJDIR}/${_kernel}; \
 687             ${MAKE} KERNEL=${INSTKERNNAME} all
 688 .endif
 689         @echo "--------------------------------------------------------------"
 690         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 691         @echo "--------------------------------------------------------------"
 692 .endfor
 693
 694
 695 # installkernel
 696 #
 697 # Install the kernel defined by INSTALLKERNEL
 698 #
 699 installkernel reinstallkernel:
 700         @echo "--------------------------------------------------------------"
 701         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
 702         @echo "--------------------------------------------------------------"
 703 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
 704         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 705             ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 706 .else
 707         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 708             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 709 .endif
 710
 711 #
 712 # most
 713 #
 714 # Build most of the user binaries on the existing system libs and includes.
 715 #
 716 most:
 717         @echo "--------------------------------------------------------------"
 718         @echo ">>> Building programs only"
 719         @echo "--------------------------------------------------------------"
 720 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 721         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 722 .endfor
 723
 724 #
 725 # installmost
 726 #
 727 # Install the binaries built by the 'most' target.  This does not include
 728 # libraries or include files.
 729 #
 730 installmost:
 731         @echo "--------------------------------------------------------------"
 732         @echo ">>> Installing programs only"
 733         @echo "--------------------------------------------------------------"
 734 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 735         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 736 .endfor
 737
 738 #
 739 # ------------------------------------------------------------------------
 740 #
 741 # From here onwards are utility targets used by the 'make world' and
 742 # related targets.  If your 'world' breaks, you may like to try to fix
 743 # the problem and manually run the following targets to attempt to
 744 # complete the build.  Beware, this is *not* guaranteed to work, you
 745 # need to have a pretty good grip on the current state of the system
 746 # to attempt to manually finish it.  If in doubt, 'make world' again.
 747 #
 748
 749 # bootstrap-tools: Build all tools required to build all tools.  Note that
 750 # order is important in a number of cases and also note that the bootstrap
 751 # and build tools stages have access to earlier binaries they themselves
 752 # had generated.
 753 #
 754 # patch:        older patch's do not have -i.  This program must be built
 755 #               first so other bootstrap tools that need to apply patches
 756 #               can use it.
 757 # [x]install:   dependancies on various new install features
 758 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 759 #               envs are not compatible with older objformat binaries.
 760 #
 761 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
 762 _strfile=       games/fortune/strfile
 763 .endif
 764
 765 bootstrap-tools:
 766         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 767 .for _tool in ${_strfile} \
 768     usr.bin/patch \
 769     bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
 770     bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
 771     bin/hostname bin/kill \
 772     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 773     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
 774     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 775     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 776     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 777     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 778     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 779     usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 780     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 781     usr.bin/tail usr.bin/unifdef \
 782     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 783     usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
 784     gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
 785     usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
 786         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 787                 cd ${.CURDIR}/${_tool}; \
 788                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 789                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 790                 ${MAKE} DIRPRFX=${_tool}/ all; \
 791                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 792 .endfor
 793         touch ${BTOOLSDEST}/.bootstrap_done
 794
 795 # build-tools: Build special purpose build tools.
 796 #
 797 # XXX we may be able to remove or consolidate this into bootstrap-tools
 798 # now that we have the native helper (.nx/.no) infrastructure.
 799 #
 800 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
 801 _share= share/syscons/scrnmaps
 802 .endif
 803
 804 _gcc41_cross= gnu/usr.bin/cc41
 805 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
 806 .if !defined(NO_GCC44)
 807 _gcc44_cross= gnu/usr.bin/cc44
 808 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
 809 .endif
 810 _custom_cross= libexec/customcc
 811 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
 812
 813 build-tools:
 814 .for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
 815         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 816                 cd ${.CURDIR}/${_tool}; \
 817                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 818                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 819                 ${MAKE} DIRPRFX=${_tool}/ all; \
 820                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 821 .endfor
 822         touch ${BTOOLSDEST}/.build_done
 823
 824 #
 825 # cross-tools: Build cross-building tools
 826 #
 827 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 828 _btxld= usr.sbin/btxld
 829 .endif
 830
 831 cross-tools:
 832 .for _tool in ${_btxld} ${_binutils} \
 833               usr.bin/objformat \
 834               ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
 835         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 836                 cd ${.CURDIR}/${_tool}; \
 837                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 838                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 839                 ${MAKE} DIRPRFX=${_tool}/ all; \
 840                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 841 .endfor
 842         touch ${CTOOLSDEST}/.cross_done
 843
 844 #
 845 # hierarchy - ensure that all the needed directories are present
 846 #
 847 hierarchy:
 848         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 849
 850 #
 851 # libraries - build all libraries, and install them under ${DESTDIR}.
 852 #
 853 # The list of libraries with dependents (${_prebuild_libs}) and their
 854 # interdependencies (__L) are built automatically by the
 855 # ${.CURDIR}/tools/make_libdeps.sh script.
 856 #
 857 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 858 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 859 #
 860 libraries:
 861         cd ${.CURDIR}; \
 862             HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
 863                 ${MAKE} -f Makefile.inc1 _startup_libs41;
 864 .if !defined(NO_GCC44)
 865         cd ${.CURDIR}; \
 866             HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
 867                 ${MAKE} -f Makefile.inc1 _startup_libs44;
 868 .endif
 869         cd ${.CURDIR}; \
 870             ${MAKE} -f Makefile.inc1 _startup_libs; \
 871             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 872             ${MAKE} -f Makefile.inc1 _generic_libs;
 873         touch ${WORLDDEST}/.libraries_done
 874
 875 # These dependencies are not automatically generated:
 876 #
 877 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
 878 # shared libraries for ELF.  The target for _startup_libsXX is
 879 # specifically built using gccXX.
 880 #
 881 _startup_libs41=        gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
 882 _startup_libs44=        gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
 883 _startup_libs=          lib/csu lib/libc lib/libc_rtld
 884
 885 _prebuild_libs=         lib/libbz2 lib/libz
 886 _prebuild_libs+=        lib/libutil
 887
 888 _generic_libs=  gnu/lib
 889
 890 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 891                 lib/libncurses/libncurses lib/libopie lib/libradius \
 892                 lib/libsbuf lib/libtacplus lib/libm \
 893                 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
 894
 895 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 896
 897 _generic_libs+= lib
 898
 899 .if !defined(NO_CRYPT)
 900 .if !defined(NO_OPENSSL)
 901 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 902 .if !defined(NO_OPENSSH)
 903 _prebuild_libs+=        secure/lib/libssh
 904 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 905 .endif
 906 .endif
 907 _generic_libs+= secure/lib
 908 .endif
 909
 910 _generic_libs+= usr.bin/lex/lib
 911
 912 .for _lib in ${_startup_libs41} ${_startup_libs44} \
 913                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 914 ${_lib}__L: .PHONY
 915 .if exists(${.CURDIR}/${_lib})
 916         ${ECHODIR} "===> ${_lib}"; \
 917                 cd ${.CURDIR}/${_lib}; \
 918                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 919                 ${MAKE} DIRPRFX=${_lib}/ all; \
 920                 ${MAKE} DIRPRFX=${_lib}/ install
 921 .endif
 922 .endfor
 923
 924 _startup_libs: ${_startup_libs:S/$/__L/}
 925 _startup_libs41: ${_startup_libs41:S/$/__L/}
 926 _startup_libs44: ${_startup_libs44:S/$/__L/}
 927 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 928 _generic_libs: ${_generic_libs:S/$/__L/}
 929
 930 # library targets must be ordered because there are inter-library
 931 # races (e.g. generation of tconfig.h)
 932 #
 933 .ORDER: ${_startup_libs41:S/$/__L/}
 934 .ORDER: ${_startup_libs44:S/$/__L/}
 935 .ORDER: ${_startup_libs:S/$/__L/}
 936 .ORDER: ${_prebuild_libs:S/$/__L/}
 937 .ORDER: ${_generic_libs:S/$/__L/}
 938
 939 .for __target in clean cleandepend cleandir obj depend includes
 940 .for entry in ${SUBDIR}
 941 ${entry}.${__target}__D: .PHONY
 942         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 943                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 944                 edir=${entry}.${MACHINE_ARCH}; \
 945                 cd ${.CURDIR}/$${edir}; \
 946         else \
 947                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 948                 edir=${entry}; \
 949                 cd ${.CURDIR}/$${edir}; \
 950         fi; \
 951         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 952 .endfor
 953 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 954 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 955 .endfor
 956 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 957
 958 # The wmake target is used by /usr/bin/wmake to run make in a
 959 # world build environment.
 960 #
 961 wmake:
 962         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 963
 964 wmakeenv:
 965         @echo '${WMAKEENV} /bin/sh'
 966
 967 bmake:
 968         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 969
 970 bmakeenv:
 971         @echo '${BMAKEENV} /bin/sh'
 972
 973 tmake:
 974         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
 975
 976 tmakeenv:
 977         @echo '${TMAKEENV} /bin/sh'
 978
 979 xmake:
 980         @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
 981
 982 xmakeenv:
 983         @echo '${XMAKEENV} /bin/sh'
 984
 985 .include <bsd.subdir.mk>
 986