gcc50: Activate workaround for libgcc_pic.a.

[dragonfly.git] / usr.bin / systat / systat.1

.\" Copyright (c) 1985, 1990, 1993
.\"     The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)systat.1    8.2 (Berkeley) 12/30/93
.\" $FreeBSD: src/usr.bin/systat/systat.1,v 1.23.2.9 2002/12/29 16:35:40 schweikh Exp $
.\"
.Dd May 24, 2015
.Dt SYSTAT 1
.Os
.Sh NAME
.Nm systat
.Nd display system statistics on a crt
.Sh SYNOPSIS
.Nm
.Op Fl Ar display
.Op Ar refresh-interval
.Sh DESCRIPTION
The
.Nm
utility displays various system statistics in a screen oriented fashion
using the curses screen display library,
.Xr ncurses 3 .
.Pp
While
.Nm
is running the screen is usually divided into two windows (an exception
is the vmstat and pvmmeter displays which uses the entire screen).
The upper window depicts the current system load average.
The information displayed in the lower window may vary, depending on
user commands.
The last line on the screen is reserved for user input and error messages.
.Pp
By default
.Nm
displays the processes getting the largest percentage of the processor
in the lower window.
Other displays show swap space usage, disk
.Tn I/O
statistics (a la
.Xr iostat 8 ) ,
virtual memory statistics (a la
.Xr vmstat 8 ) ,
network ``mbuf'' utilization,
.Tn TCP/IP
statistics,
and network connections (a la
.Xr netstat 1 ) .
.Pp
Input is interpreted at two different levels.
A ``global'' command interpreter processes all keyboard input.
If this command interpreter fails to recognize a command, the
input line is passed to a per-display command interpreter.
This allows each display to have certain display-specific commands.
.Pp
Command line options:
.Bl -tag -width "refresh_interval"
.It Fl Ns Ar display
The
.Fl
flag expects
.Ar display
to be one of:
.Ic altq ,
.Ic icmp ,
.Ic icmp6 ,
.Ic ifstat ,
.Ic iostat ,
.Ic ip ,
.Ic ip6 ,
.Ic mbufs ,
.Ic netstat ,
.Ic netbw ,
.Ic pftop ,
.Ic pigs ,
.Ic pvmmeter ,
.Ic sensors ,
.Ic swap ,
.Ic tcp ,
or
.Ic vmstat .
These displays can also be requested interactively (without the
.Dq Fl )
and are described in
full detail below.
.It Ar refresh-interval
The
.Ar refresh-value
specifies the screen refresh time interval in seconds.
.El
.Pp
Certain characters cause immediate action by
.Nm .
These are
.Bl -tag -width Fl
.It Ic \&^L
Refresh the screen.
.It Ic \&^G
Print the name of the current ``display'' being shown in
the lower window and the refresh interval.
.It Ic \&:
Move the cursor to the command line and interpret the input
line typed as a command.
While entering a command the current character erase, word erase,
and line kill characters may be used.
.El
.Pp
The following commands are interpreted by the ``global'' command interpreter.
.Bl -tag -width Fl
.It Ic help
Print the names of the available displays on the command line.
.It Ic load
Print the load average over the past 1, 5, and 15 minutes on the command line.
.It Ic stop
Stop refreshing the screen.
.It Oo Ic start Oc Op Ar number
Start (continue) refreshing the screen.
If a second, numeric, argument is provided it is interpreted as a
refresh interval (in seconds).
Supplying only a number will set the refresh interval to this value.
.It Ic quit
Exit
.Nm .
(This may be abbreviated to
.Ic q . )
.El
.Pp
The available displays are:
.Bl -tag -width Ic
.It Ic pigs
Display, in the lower window, those processes resident in main
memory and getting the
largest portion of the processor (the default display).
When less than 100% of the
processor is scheduled to user processes, the remaining time
is accounted to the ``idle'' process.
.It Ic icmp
Display, in the lower window, statistics about messages received and
transmitted by the Internet Control Message Protocol
.Pq Dq Tn ICMP .
The left half of the screen displays information about received packets,
and the right half displays information regarding transmitted packets.
.Pp
The
.Ic icmp
display understands two commands:
.Ic mode
and
.Ic reset .
The
.Ic mode
command is used to select one of four display modes, given as its argument:
.Pp
.Bl -tag -width absoluteXX -compact
.It Ic rate
Show the rate of change of each value in packets per second (the default).
.It Ic delta
Show the rate of change of each value in packets per refresh interval.
.It Ic since
Show the total change of each value since the display was last reset.
.It Ic absolute
Show the absolute value of each statistic.
.El
.Pp
The
.Ic reset
command resets the baseline for
.Ic since
mode.
The
.Ic mode
command with no argument will display the current mode in the command line.
.It Ic icmp6
This display is like the
.Ic icmp
display, but displays statistics for
.Tn IPv6 ICMP .
.It Ic ip
Otherwise identical to the
.Ic icmp
display, except that it displays
.Tn IP
and
.Tn UDP
statistics.
.It Ic ip6
Like the
.Ic ip
display,
except that it displays
.Tn IPv6
statistics.
.It Ic tcp
Like
.Ic icmp ,
but with
.Tn TCP
statistics.
.It Ic ifstat
Display, in the lower window, statistics about network throughput on
a per-interface basis.
.It Ic iostat
Display, in the lower window, statistics about processor use
and disk throughput.
Statistics on processor use appear as
bar graphs of the amount of time executing in user mode (`user'),
in user mode running low priority processes (`nice'), in
system mode (`system'), in interrupt mode (`interrupt'),
and idle (`idle').
Statistics on disk throughput show, for each drive, megabytes per second,
average number of disk transactions per second, and
average kilobytes of data per transaction.
This information may be
displayed as bar graphs or as rows of numbers which scroll downward.
Bar graphs are shown by default.
.Pp
The following commands are specific to the
.Ic iostat
display; the minimum unambiguous prefix may be supplied.
.Pp
.Bl -tag -width Fl -compact
.It Ic numbers
Show the disk
.Tn I/O
statistics in numeric form.
Values are displayed in numeric columns which scroll downward.
.It Ic bars
Show the disk
.Tn I/O
statistics in bar graph form (default).
.It Ic kbpt
Toggle the display of kilobytes per transaction.
(the default is to not display kilobytes per transaction).
.El
.It Ic sensors
Display, in the lower window,
the current values of available hardware sensors,
in a format similar to that of
.Xr sysctl 8 .
.Pp
The following commands are specific to the
.Ic sensors
display; the minimum unambiguous prefix may be supplied.
.Pp
.Bl -tag -width Fl -compact
.It Ic type Op Ar type ...
Display only the sensors which match the specified
.Ar type .
Multiple types may be specified,
separated by spaces.
If no types are specified,
all available sensors will be displayed.
Supported values of
.Ar type
are
.Cm temp ,
.Cm fan ,
.Cm volt ,
.Cm acvolt ,
.Cm resistance ,
.Cm power ,
.Cm current ,
.Cm watthour ,
.Cm amphour ,
.Cm indicator ,
.Cm raw ,
.Cm percent ,
.Cm illuminance ,
.Cm drive ,
.Cm timedelta ,
and
.Cm ecc .
.It Ic match Op Ar device ...
Display only the sensors match the specified
.Ar device .
Multiple devices may be specified,
separated by spaces.
If no devices are specified,
all available sensors will be displayed.
A device type could be specified by using
an asterisk
.Pq Sq Li *
in the place of the device unit.
For example:
.Pp
.Dl match cpu*
.El
.It Ic swap
Show information about swap space usage on all the
swap areas compiled into the kernel.
The first column is the device name of the partition.
The next column is the total space available in the partition.
The ``Used'' column indicates the total blocks used so far;
the graph shows the percentage of space in use on each partition.
If there are more than one swap partition in use,
a total line is also shown.
Areas known to the kernel, but not in use are shown as not available.
.It Ic mbufs
Display, in the lower window, the number of mbufs allocated
for particular uses, i.e.\& data, socket structures, etc.
.It Ic vmstat
Take over the entire display and show a (rather crowded) compendium
of statistics related to virtual memory usage, process scheduling,
device interrupts, system name translation cacheing, disk
.Tn I/O
etc.
.Pp
The upper left quadrant of the screen shows the number
of users logged in and the load average over the last one, five,
and fifteen minute intervals.
.Pp
Below this line are statistics on memory utilization.
The first row (`Act') reports memory usage only among active processes,
that is processes that have run in the previous twenty seconds.
The second row (`All') reports on memory usage of all processes.
Two groups of columns are shown, `REAL' and `VIRTUAL'.
The first column (`Tot') reports on the number of
physical pages claimed by processes.
The second column (`Share') reports the number of
physical pages that are devoted to read only text pages.
The third and fourth columns report the same two figures for
virtual pages, that is the number of pages that would be
needed if all processes had all of their pages.
Finally the last column (`Free') shows the number of
physical pages on the free list.
.Pp
Below the memory display is a list of the
average number of processes (over the last refresh interval)
that are runnable (`r'), in page wait (`p'),
in disk wait other than paging (`d'),
sleeping (`s'), and swapped out but desiring to run (`w').
The row also shows the average number of context switches (`Csw'),
traps (`Trp'; includes page faults), system calls (`Sys'), interrupts (`Int'),
network software interrupts (`Sof'), and page faults (`Flt').
.Pp
Below the process queue length listing is a listing of
.Tn CPU
usage, a numerical listing and a bar graph showing the amount of
system (`='), interrupt (`+'), user (`>'), nice (`-'), and idle time (` ').
.Pp
Below the
.Tn CPU
usage display are statistics on name translations.
It lists the number of path names translated
in the previous interval (`Path-lookups'),
the number and percentage of the path lookups that were
handled by the name translation cache, and
the average number of path components in path lookups (`Components').
.Pp
At the bottom left is the disk usage display.
It reports the number of
kilobytes per transaction (`KB/t'),
read transactions per second (`tpr/s'),
megabytes per second in read transaction (`MBr/s'),
write transactions per second (`tpw/s'),
megabytes per second in write transaction (`MBw/s') and
the percentage of the time the disk was busy (`% busy') averaged
over the refresh period of the display (by default, five seconds).
The system keeps statistics on most every storage device.
In general, up to seven devices are displayed.
The devices displayed by default are the
first devices in the kernel's device list.
See
.Xr devstat 3
and
.Xr devstat 9
for details on the devstat system.
.Pp
If at most 4 disk devices are shown,
extended virtual memory statistics are shown right to disk usage:
pages zero filled on demand (`zfod'),
pages optimized zero filled on demand (`ozfod'),
slow (i.e.\& non-optimized) zero fills percentage (`%sloz'),
total pages freed (`tfree').
.Pp
Under the date in the upper right hand quadrant are statistics
on paging and swapping activity.
The first two columns (`VN PAGER') report the average number of pages
brought in and out per second over the last refresh interval
due to page faults and the paging daemon.
The third and fourth columns (`SWAP PAGER') report the average number of pages
brought in and out per second over the last refresh interval
due to swap requests initiated by the scheduler.
The first row (`count') of the display shows the average
number of disk transfers per second over the last refresh interval;
the second row (`pages') of the display shows the average
number of pages transferred per second over the last refresh interval.
.Pp
Below the paging statistics is a column of lines regarding the virtual
memory system which list the average number of
pages zero filled on demand (`zfod')
(shown with extended virtual memory statistics if screen space permits),
pages copied on write (`cow'),
pages wired down (`wire'),
active pages (`act'),
inactive pages (`inact'),
pages on the buffer cache queue (`cache'),
number of free pages (`free'),
pages freed by the page daemon (`daefr'),
pages freed by exiting processes (`prcfr'),
pages reactivated from the free list (`react'),
times the page daemon was awakened (`pdwak'),
pages analyzed by the page daemon (`pdpgs'),
and
intransit blocking page faults (`intrn')
per second over the refresh interval.
.Pp
At the bottom of this column are lines showing the
amount of memory, in kilobytes, used for the buffer cache (`buf'),
the number of dirty buffers in the buffer cache (`dirtybuf'),
desired maximum size of vnode cache (`maxvnodes')
(mostly unused, except to size the name cache),
number of vnodes actually allocated (`numvnodes'),
and
number of allocated vnodes that are free (`freevnodes').
.Pp
Running down the right hand side of the display is a breakdown
of the interrupts being handled by the system (`Interrupts').
At the top of the list is the total interrupts per second
over the time interval (`total').
The rest of the column breaks down the total on a device by device basis.
Only devices that have interrupted at least once since boot time are shown.
.Pp
The following commands are specific to the
.Ic vmstat
display; the minimum unambiguous prefix may be supplied.
.Pp
.Bl -tag -width Ar -compact
.It Ic boot
Display cumulative statistics since the system was booted.
.It Ic run
Display statistics as a running total from the point this command is given.
.It Ic time
Display statistics averaged over the refresh interval (the default).
.It Ic want_fd
Toggle the display of fd devices in the disk usage display.
.It Ic zero
Reset running statistics to zero.
.El
.It Ic pvmmeter
Display per
.Tn CPU
statistics, including
.Tn LAPIC
timer interrupts (`timer'),
.Tn IPIs
(Inter-Processor Interrupts) (`ipi'),
external interrupts (i.e.\& not timer or ipi) (`extint'), and
.Tn CPU
time breakdown (`user%', `nice%', `sys%', `intr%', and `idle%').
.It Ic netstat
Display, in the lower window, network connections.
By default, network servers awaiting requests are not displayed.
Each address is displayed in the format ``host.port'',
with each shown symbolically, when possible.
It is possible to have addresses displayed numerically,
limit the display to a set of ports, hosts, and/or protocols
(the minimum unambiguous prefix may be supplied):
.Pp
.Bl -tag -width Ar -compact
.It Ic all
Toggle the displaying of server processes awaiting requests (this
is the equivalent of the
.Fl a
flag to
.Xr netstat 1 ) .
.It Ic numbers
Display network addresses numerically.
.It Ic names
Display network addresses symbolically.
.It Ic proto Ar protocol
Display only network connections using the indicated
.Ar protocol .
Supported protocols are
.Cm tcp ,
.Cm udp ,
and
.Cm all .
.It Ic ignore Op Ar items
Do not display information about connections associated with
the specified hosts or ports.
Hosts and ports may be specified
by name (``vangogh'', ``ftp''), or numerically.
Host addresses use the Internet dot notation (``128.32.0.9'').
Multiple items
may be specified with a single command by separating them with spaces.
.It Ic display Op Ar items
Display information about the connections associated with the
specified hosts or ports.
As for
.Ic ignore ,
.Ar items
may be names or numbers.
.It Ic show Op Cm ports | hosts
Show, on the command line, the currently selected protocols, hosts, and ports.
Hosts and ports which are being ignored are prefixed with a `!'.
If
.Cm ports
or
.Cm hosts
is supplied as an argument to
.Ic show ,
then only the requested information will be displayed.
.It Ic reset
Reset the port, host, and protocol matching mechanisms to the default
(any protocol, port, or host).
.El
.It Ic netbw
Display aggregate and per-connection tcp receive and transmit rates.
Only active tcp connections originated or terminated by the host
are shown.
.It Ic pftop
Display packet filter (pf) state information for states which are
actively passing data.  This requires pf to be active to be meaningful
but is capable of displaying connection state for all packet traffic
passing through the machine, even for connections that do not originate
or terminate on the machine.
.Pp
You need a wide ~100 column window to display pftop reasonably well.
IPV6 addresses are truncated (just the first two and last two words
are displayed) for brevity.  Generally speaking 'rcv' is data received
by the first IP and 'snd' is data sent to the second IP.  'ttl' is
the sum total data sent plus received tracked by the state.
.Pp
The display is sorted by average rx+tx bandwidth calculated on a 1/8 decay
curve to prevent fields from jumping around too much.  Units for all rows
are selected based on the largest bandwidth measurement for uniformity.
Note that two states will be present for any connection operating over NAT.
.It Ic altq
Display packet filter altq statistics.
The ALTQ operates in conjunction with the packet filter (pf) on the
interface's transmit path.
Packet rate, data rate in bytes per interval, drop rate, and queue
length is displayed in three separate sections in a convenient
INTERFACE-by-ALTQLABEL matrix.
.Pp
To save space drops
and queue length are combined in the third section.
If packet drops are present, drops
will be displayed, otherwise the packet queue length with a 'Q' suffix
will be displayed.
.El
.Pp
Commands to switch between displays may be abbreviated to the
minimum unambiguous prefix; for example, ``io'' for ``iostat''.
Certain information may be discarded when the screen size is
insufficient for display.
For example, on a machine with 10 drives the
.Ic iostat
bar graph displays only 3 drives on a 24 line terminal.
When a bar graph would overflow the allotted screen space it is
truncated and the actual value is printed ``over top'' of the bar.
.Pp
The following commands are common to each display which shows
information about disk drives.
These commands are used to
select a set of drives to report on, should your system have
more drives configured than can normally be displayed on the screen.
.Pp
.Bl -tag -width Ar -compact
.It Ic ignore Op Ar drives
Do not display information about the drives indicated.
Multiple drives may be specified, separated by spaces.
.It Ic display Op Ar drives
Display information about the drives indicated.
Multiple drives may be specified, separated by spaces.
.It Ic only Op Ar drives
Display only the specified drives.
Multiple drives may be specified, separated by spaces.
.It Ic drives
Display a list of available devices.
.It Ic match Ar type , Ns Ar if , Ns Ar pass Op | Ar ...
Display devices matching the given pattern.
The basic matching expressions are the same as those used in
.Xr iostat 8
with one difference.
Instead of specifying multiple
.Fl t
arguments which are then ORed together, the user instead specifies multiple
matching expressions joined by the pipe
.Pq Ql \&|
character.
The comma separated arguments within each matching expression are ANDed
together, and then the pipe separated matching expressions are ORed together.
Any device matching the combined expression will be displayed,
if there is room to display it.
For example:
.Pp
.Dl match da,scsi | cd,ide
.Pp
This will display all
.Tn SCSI
Direct Access devices and all
.Tn IDE CDROM
devices.
.Pp
.Dl match da | sa | cd,pass
.Pp
This will display all Direct Access devices, all Sequential Access devices,
and all passthrough devices that provide access to
.Tn CDROM
drives.
.El
.Sh FILES
.Bl -tag -width /etc/networks -compact
.It Pa /boot/kernel
For the namelist.
.It Pa /dev/kmem
For information in main memory.
.It Pa /etc/hosts
For host names.
.It Pa /etc/networks
For network names.
.It Pa /etc/services
For port names.
.El
.Sh SEE ALSO
.Xr netstat 1 ,
.Xr kvm 3 ,
.Xr icmp 4 ,
.Xr icmp6 4 ,
.Xr ip 4 ,
.Xr ip6 4 ,
.Xr tcp 4 ,
.Xr udp 4 ,
.Xr iostat 8 ,
.Xr sysctl 8 ,
.Xr vmstat 8
.Sh HISTORY
The
.Nm
program appeared in
.Bx 4.3 .
The
.Ic icmp ,
.Ic ip ,
and
.Ic tcp
displays appeared in
.Fx 3.0 ;
the notion of having different display modes for the
.Tn ICMP ,
.Tn IP ,
.Tn TCP ,
and
.Tn UDP
statistics was stolen from the
.Fl C
option to
.Xr netstat 1
in Silicon Graphics'
.Tn IRIX
system.
.Sh BUGS
Certain displays presume a minimum of 80 characters per line.
The
.Ic vmstat
display looks out of place because it is (it was added in as
a separate display rather than created as a new program).