Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
   4 #
   5 # Build-time options are documented in make.conf(5).
   6 #
   7 # The intended user-driven targets are:
   8 #
   9 # buildworld  - rebuild *everything*, including glue to help do upgrades
  10 # quickworld  - skip the glue and do a depend+build on the meat
  11 # realquickworld - skip the glue and depend stages and just build the meat
  12 # crossworld  - only build the glue (particularly the cross-build environment)
  13 # installworld- install everything built by "buildworld"
  14 # most        - build user commands, no libraries or include files
  15 # installmost - install user commands, no libraries or include files
  16 #
  17 # Standard targets (not defined here) are documented in the makefiles in
  18 # /usr/share/mk.  These include:
  19 #               obj depend all install clean cleandepend cleanobj
  20
  21 # Put initial settings here.
  22 SUBDIR=
  23
  24 # We must do share/info early so that installation of info `dir'
  25 # entries works correctly.  Do it first since it is less likely to
  26 # grow dependencies on include and lib than vice versa.
  27 .if exists(${.CURDIR}/share/info)
  28 SUBDIR+= share/info
  29 .endif
  30
  31 # We must do include and lib early so that the perl *.ph generation
  32 # works correctly as it uses the header files installed by this.
  33 .if exists(${.CURDIR}/include)
  34 SUBDIR+= include
  35 .endif
  36 .if exists(${.CURDIR}/lib)
  37 SUBDIR+= lib
  38 .endif
  39 # This exists simply to ensure that the obj dir hierarchy is
  40 # intact for nrelease, allowing the nrelease Makefile's to
  41 # reference ${.OBJDIR}.
  42 #
  43 .if exists(${.CURDIR}/nrelease)
  44 SUBDIR+= nrelease
  45 .endif
  46
  47 .if exists(${.CURDIR}/bin)
  48 SUBDIR+= bin
  49 .endif
  50 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  51 SUBDIR+= games
  52 .endif
  53 .if exists(${.CURDIR}/gnu)
  54 SUBDIR+= gnu
  55 .endif
  56 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  57     !defined(NO_CRYPT) && !defined(NO_OPENSSL) && defined(WANT_KERBEROS)
  58 SUBDIR+= kerberos5
  59 .endif
  60 .if exists(${.CURDIR}/libexec)
  61 SUBDIR+= libexec
  62 .endif
  63 .if exists(${.CURDIR}/sbin)
  64 SUBDIR+= sbin
  65 .endif
  66 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
  67 SUBDIR+= secure
  68 .endif
  69 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  70 SUBDIR+= share
  71 .endif
  72 .if exists(${.CURDIR}/sys)
  73 SUBDIR+= sys
  74 .endif
  75 .if exists(${.CURDIR}/usr.bin)
  76 SUBDIR+= usr.bin
  77 .endif
  78 .if exists(${.CURDIR}/usr.sbin)
  79 SUBDIR+= usr.sbin
  80 .endif
  81
  82 # etc must be last for "distribute" to work
  83 .if exists(${.CURDIR}/etc)
  84 SUBDIR+= etc
  85 .endif
  86
  87 # These are last, since it is nice to at least get the base system
  88 # rebuilt before you do them.
  89 .if defined(LOCAL_DIRS)
  90 .for _DIR in ${LOCAL_DIRS}
  91 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  92 SUBDIR+= ${_DIR}
  93 .endif
  94 .endfor
  95 .endif
  96
  97 .if defined(SUBDIR_OVERRIDE)
  98 SUBDIR=         ${SUBDIR_OVERRIDE}
  99 .endif
 100
 101 .if defined(NOCLEANDIR)
 102 CLEANDIR=       clean cleandepend
 103 .else
 104 CLEANDIR=       cleandir
 105 .endif
 106
 107 .if defined(NO_CLEAN)
 108 NOCLEAN=        # defined
 109 .endif
 110
 111 # Object directory base in primary make.  Note that when we rerun make
 112 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 113 # subdirectory because the rest of the build system needs it that way.
 114 # The original object directory base is saved in OBJTREE.
 115 #
 116 MAKEOBJDIRPREFIX?=      /usr/obj
 117 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 118
 119 # Used for stage installs and pathing
 120 #
 121 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 122
 123 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 124 # anyhow, and we need to be able to override it for stage installs
 125 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 126
 127 # This sets the compiler we use to build the world/kernel with
 128 WORLD_CCVER?=   gcc41
 129
 130 TARGET_ARCH?=   ${MACHINE_ARCH}
 131 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 132 TARGET?=        ${MACHINE}
 133 .else
 134 TARGET?=        ${TARGET_ARCH}
 135 .endif
 136 .if make(buildworld)
 137 BUILD_ARCH!=    sysctl -n hw.machine_arch
 138 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 139 .error To cross-build, set TARGET_ARCH.
 140 .endif
 141 .endif
 142
 143 # Backwards compatibility with older make's or older sys.mk's.  make
 144 # is expected to define MACHINE_PLATFORM.
 145 #
 146 .if !defined(MACHINE_PLATFORM)
 147 MACHINE_PLATFORM= pc32
 148 .endif
 149
 150 # XXX this is ugly and we need to come up with a nicer solution
 151 .if !defined(TARGET_PLATFORM)
 152 .if ${TARGET_ARCH} == "i386"
 153 TARGET_PLATFORM= pc32
 154 .elif ${TARGET_ARCH} == "amd64"
 155 TARGET_PLATFORM= pc64
 156 .else
 157 .error Unknown target architecture.
 158 .endif
 159 .endif
 160
 161 THREAD_LIB?=    thread_xu
 162 .if ${THREAD_LIB} == "c_r"
 163 .if defined(NO_LIBC_R)
 164 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
 165 .endif
 166 .endif
 167
 168 # BTOOLS        (Natively built) All non-cross-development tools that the
 169 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 170 #               We will not use the native system's exec path once we start
 171 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 172 #
 173 # CTOOLS        (Natively built) Cross development tools which are specific
 174 #               to the target architecture.
 175 #
 176 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 177 #               CTOOLS.
 178 #
 179 # MACHINE_PLATFORM Platform Architecture we are building on
 180 # MACHINE       Machine Architecture (usually the same as MACHINE_ARCH)
 181 # MACHINE_ARCH  Cpu Architecture we are building on
 182 #
 183 # TARGET_PLATFORM Platform Architecture we are building for
 184 # TARGET        Machine Architecture we are building for
 185 # TARGET_ARCH   Cpu Architecture we are building for
 186 #
 187 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 188 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 189 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 190
 191 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 192 # cross-tools stages to augment the existing command path to access newer
 193 # versions of certain utilities such as 'patch' that the cross-tools stage
 194 # might expect.
 195 #
 196 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 197
 198 # The strict temporary command path contains all binaries required
 199 # by the buildworld system after the cross-tools stage.
 200 #
 201 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 202
 203 TMPDIR?=        /tmp
 204 TMPPID!=        echo $$$$
 205
 206 #
 207 # Building a world goes through the following stages
 208 #
 209 # 1. bootstrap-tool stage [BMAKE]
 210 #       This stage is responsible for creating programs that
 211 #       are needed for backward compatibility reasons. They
 212 #       are not built as cross-tools.
 213 # 2. build-tool stage [TMAKE]
 214 #       This stage is responsible for creating the object
 215 #       tree and building any tools that are needed during
 216 #       the build process.
 217 # 3. cross-tool stage [XMAKE]
 218 #       This stage is responsible for creating any tools that
 219 #       are needed for cross-builds. A cross-compiler is one
 220 #       of them.
 221 # 4. world stage [WMAKE]
 222 #       This stage actually builds the world.
 223 # 5. install stage (optional) [IMAKE]
 224 #       This stage installs a previously built world.
 225 #
 226
 227 # bootstrap-tool stage
 228 #
 229 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 230                 OBJTREE=${OBJTREE} \
 231                 DESTDIR=${BTOOLSDEST} \
 232                 PATH=${BTOOLSPATH}:${PATH} \
 233                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 234
 235 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 236                 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 237                 -DNO_WERROR -DNO_NLS
 238
 239 # build-tool stage
 240 #
 241 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 242                 OBJTREE=${OBJTREE} \
 243                 DESTDIR= \
 244                 PATH=${BTOOLSPATH}:${PATH} \
 245                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 246
 247 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 248                 -DNO_FORTRAN -DNOSHARED
 249
 250 # cross-tool stage
 251 #
 252 # note: TOOLS_PREFIX points to the obj root holding the cross
 253 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 254 #       holding the target environment (and also determines where cross-built
 255 #       libraries, crt*.o, and include files are installed).
 256 #
 257 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 258                 OBJTREE=${OBJTREE} \
 259                 DESTDIR=${CTOOLSDEST} \
 260                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 261                 TOOLS_PREFIX=${CTOOLSDEST} \
 262                 USRDATA_PREFIX=${WORLDDEST} \
 263                 PATH=${BTOOLSPATH}:${PATH}
 264
 265 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 266                 -DBOOTSTRAPPING -DNOSHARED
 267
 268 # world stage, note the strict path and note that TOOLS_PREFIX is left
 269 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 270 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 271 # for both binary and library paths, even though it is being compiled to
 272 # WORLDDEST.  None of the programs in the world stage are ever actually
 273 # executed during the buildworld/installworld.
 274 #
 275 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 276                 OBJTREE=${OBJTREE} \
 277                 MACHINE_ARCH=${TARGET_ARCH} \
 278                 MACHINE=${TARGET} \
 279                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 280                 OBJFORMAT_PATH=${CTOOLSDEST} \
 281                 HOST_CCVER=${HOST_CCVER} \
 282                 CCVER=${WORLD_CCVER}
 283
 284 WMAKEENV=       ${CROSSENV} \
 285                 DESTDIR=${WORLDDEST} \
 286                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 287                 PATH=${STRICTTMPPATH}
 288
 289 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 290
 291 # install stage
 292 #
 293 IMAKEENV=       ${CROSSENV} \
 294                 PATH=${STRICTTMPPATH}
 295 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 296
 297 # kernel stage
 298 #
 299 KMAKEENV=       ${WMAKEENV}
 300
 301 # buildworld
 302 #
 303 # Attempt to rebuild the entire system, with reasonable chance of
 304 # success, regardless of how old your existing system is.
 305 #
 306 _worldtmp:
 307         @echo
 308         @echo "--------------------------------------------------------------"
 309         @echo ">>> Rebuilding the temporary build tree"
 310         @echo "--------------------------------------------------------------"
 311 .if !defined(NOCLEAN)
 312         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 313 .else
 314         # XXX - These two can depend on any header file.
 315         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 316         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 317 .endif
 318         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 319 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 320         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 321                 -p ${_dir}/  > /dev/null
 322         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 323                 -p ${_dir}/usr > /dev/null
 324 .endfor
 325         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 326                 -p ${WORLDDEST}/usr/include > /dev/null
 327         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 328
 329 _bootstrap-tools:
 330         @echo
 331         @echo "--------------------------------------------------------------"
 332         @echo ">>> stage 1: bootstrap tools"
 333         @echo "--------------------------------------------------------------"
 334         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 335 _cleanobj:
 336         @echo
 337         @echo "--------------------------------------------------------------"
 338         @echo ">>> stage 2a: cleaning up the object tree"
 339         @echo "--------------------------------------------------------------"
 340         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 341 _obj:
 342         @echo
 343         @echo "--------------------------------------------------------------"
 344         @echo ">>> stage 2b: rebuilding the object tree"
 345         @echo "--------------------------------------------------------------"
 346         cd ${.CURDIR}; ${WMAKE} par-obj
 347 _build-tools:
 348         @echo
 349         @echo "--------------------------------------------------------------"
 350         @echo ">>> stage 2c: build tools"
 351         @echo "--------------------------------------------------------------"
 352         cd ${.CURDIR}; ${TMAKE} build-tools
 353 _cross-tools:
 354         @echo
 355         @echo "--------------------------------------------------------------"
 356         @echo ">>> stage 3: cross tools"
 357         @echo "--------------------------------------------------------------"
 358         cd ${.CURDIR}; ${XMAKE} cross-tools
 359 _includes:
 360         @echo
 361         @echo "--------------------------------------------------------------"
 362         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 363         @echo "--------------------------------------------------------------"
 364         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 365 _libraries:
 366         @echo
 367         @echo "--------------------------------------------------------------"
 368         @echo ">>> stage 4b: building libraries"
 369         @echo "--------------------------------------------------------------"
 370         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 371 _depend:
 372         @echo
 373         @echo "--------------------------------------------------------------"
 374         @echo ">>> stage 4c: make dependencies"
 375         @echo "--------------------------------------------------------------"
 376         cd ${.CURDIR}; ${WMAKE} par-depend
 377 everything:
 378         @echo
 379         @echo "--------------------------------------------------------------"
 380         @echo ">>> stage 4d: building everything.."
 381         @echo "--------------------------------------------------------------"
 382         cd ${.CURDIR}; ${WMAKE} all
 383
 384 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 385 # entire object tree and built the bootstrap tools in a different location.
 386 #
 387 # buildworld    - build everything from scratch
 388 # quickworld    - skip the bootstrap, build, and cross-build steps
 389 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 390 #
 391 # note: we include _obj in realquickworld to prevent accidental creation
 392 # of files in /usr/src.
 393
 394 WMAKE_TGTS=
 395 .if !defined(SUBDIR_OVERRIDE)
 396 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 397 .endif
 398 WMAKE_TGTS+=    _obj _build-tools
 399 .if !defined(SUBDIR_OVERRIDE)
 400 WMAKE_TGTS+=    _cross-tools
 401 .endif
 402 WMAKE_TGTS+=    _includes _libraries _depend everything
 403
 404 buildworld: ${WMAKE_TGTS}
 405
 406 quickworld: _obj _includes _libraries _depend everything
 407
 408 realquickworld: _obj _includes _libraries everything
 409
 410 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 411
 412 .ORDER: ${WMAKE_TGTS}
 413
 414 #
 415 # installcheck
 416 #
 417 # Checks to be sure system is ready for installworld
 418 #
 419 installcheck:
 420 .if !defined(NO_SENDMAIL)
 421         @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 422         @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 423 .endif
 424         @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 425         @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
 426         @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 427 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 428         @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
 429 .endif
 430 # distributeworld
 431 #
 432 # Distributes everything compiled by a `buildworld'.
 433 #
 434 # installworld
 435 #
 436 # Installs everything compiled by a 'buildworld'.
 437 #
 438 distributeworld installworld: installcheck
 439         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 440         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
 441
 442 #
 443 # reinstall
 444 #
 445 # If you have a build server, you can NFS mount the source and obj directories
 446 # and do a 'make reinstall' on the *client* to install new binaries from the
 447 # most recent server build.
 448 #
 449 reinstall:
 450         @echo "--------------------------------------------------------------"
 451         @echo ">>> Making hierarchy"
 452         @echo "--------------------------------------------------------------"
 453         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 454         @echo
 455         @echo "--------------------------------------------------------------"
 456         @echo ">>> Installing everything.."
 457         @echo "--------------------------------------------------------------"
 458         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 459 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 460         @echo
 461         @echo "--------------------------------------------------------------"
 462         @echo ">>> Rebuilding man page indices"
 463         @echo "--------------------------------------------------------------"
 464         cd ${.CURDIR}/share/man; ${MAKE} makedb
 465 .endif
 466
 467 redistribute:
 468         @echo "--------------------------------------------------------------"
 469         @echo ">>> Distributing everything.."
 470         @echo "--------------------------------------------------------------"
 471         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 472
 473 #
 474 # buildkernel, nativekernel, quickkernel, and installkernel
 475 #
 476 # Which kernels to build and/or install is specified by setting
 477 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 478 # Only the existing (depending TARGET) config files are used
 479 # for building kernels and only the first of these is designated
 480 # as the one being installed.
 481 #
 482 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 483 # kernel and modules to be stripped of its debug info (required
 484 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 485 # if you only want to strip the modules of their debug info.  These
 486 # only apply if you have DEBUG=-g in your kernel config or make line.
 487 #
 488 # Note that we have to use TARGET instead of TARGET_ARCH when
 489 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 490 # be set to cross-build, we have to make sure TARGET is set
 491 # properly.
 492
 493 .if !defined(KERNCONF) && defined(KERNEL)
 494 KERNCONF=       ${KERNEL}
 495 KERNWARN=       yes
 496 .else
 497 KERNCONF?=      GENERIC
 498 .endif
 499 INSTKERNNAME?=  kernel
 500
 501 KRNLSRCDIR=     ${.CURDIR}/sys
 502 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 503 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 504 KERNCONFDIR?=   ${KRNLCONFDIR}
 505
 506 BUILDKERNELS=
 507 INSTALLKERNEL=
 508 .for _kernel in ${KERNCONF}
 509 .if exists(${KERNCONFDIR}/${_kernel})
 510 BUILDKERNELS+=  ${_kernel}
 511 .if empty(INSTALLKERNEL)
 512 INSTALLKERNEL= ${_kernel}
 513 .endif
 514 .endif
 515 .endfor
 516
 517 # kernel version numbers survive rm -rf
 518 #
 519 .for _kernel in ${BUILDKERNELS}
 520 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 521 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 522 .endif
 523 .endfor
 524
 525 #
 526 # buildkernel
 527 #
 528 # Builds all kernels defined by BUILDKERNELS.
 529 #
 530 bk_tools:
 531         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 532             echo "You must buildworld before buildkernel.  If you wish"; \
 533             echo "to build a kernel using native tools, config it manually"; \
 534             echo "or use the nativekernel target if you are in a rush"; \
 535             exit 1; \
 536         fi
 537
 538 maybe_bk_tools:
 539 .for _kernel in ${BUILDKERNELS}
 540         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 541             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 542                 echo "The kernel was build using buildworld tools which no" ; \
 543                 echo "longer appear to exist, quickkernel failed!" ; \
 544                 exit 1; \
 545             fi; \
 546         fi
 547 .endfor
 548
 549 bk_build_list:
 550 .if empty(BUILDKERNELS)
 551         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 552         @echo ">>> Did you move your kernel configs from i386/conf to config/?"
 553         @false
 554 .endif
 555
 556 bk_kernwarn:
 557 .if defined(KERNWARN)
 558         @echo "--------------------------------------------------------------"
 559         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 560         @echo "--------------------------------------------------------------"
 561         @sleep 3
 562 .endif
 563         @echo
 564
 565 # The buildkernel target rebuilds the specified kernels from scratch
 566 # using the crossbuild tools generated by the last buildworld.  It is
 567 # the safest (but also the most time consuming) way to build a new kernel.
 568 #
 569 buildkernel:    bk_tools bk_build_list bk_kernwarn
 570 .for _kernel in ${BUILDKERNELS}
 571         @echo "--------------------------------------------------------------"
 572         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 573         @echo "--------------------------------------------------------------"
 574         @echo "===> ${_kernel}"
 575 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 576         rm -rf ${KRNLOBJDIR}/${_kernel}
 577 .else
 578         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 579                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 580                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 581 .endif
 582         mkdir -p ${KRNLOBJDIR}
 583 .if !defined(NO_KERNELCONFIG)
 584         cd ${KRNLCONFDIR}; \
 585                 PATH=${STRICTTMPPATH} \
 586                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 587                         ${KERNCONFDIR}/${_kernel}
 588 .endif
 589 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 590         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 591 .endif
 592         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 593         cd ${KRNLOBJDIR}/${_kernel}; \
 594             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 595             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 596 .if !defined(NO_KERNELDEPEND)
 597         cd ${KRNLOBJDIR}/${_kernel}; \
 598             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 599 .endif
 600         cd ${KRNLOBJDIR}/${_kernel}; \
 601             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 602         @echo "--------------------------------------------------------------"
 603         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 604         @echo "--------------------------------------------------------------"
 605 .endfor
 606
 607 # The nativekernel target rebuilds the specified kernels from scratch
 608 # using the system's standard compiler rather than using the crossbuild
 609 # tools generated by the last buildworld.  This is fairly safe if your
 610 # system is reasonable up-to-date.
 611 #
 612 nativekernel:   bk_build_list bk_kernwarn
 613 .for _kernel in ${BUILDKERNELS}
 614         @echo "--------------------------------------------------------------"
 615         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 616         @echo "--------------------------------------------------------------"
 617         @echo "===> ${_kernel}"
 618 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 619         rm -rf ${KRNLOBJDIR}/${_kernel}
 620 .else
 621         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 622                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 623                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 624 .endif
 625         mkdir -p ${KRNLOBJDIR}
 626 .if !defined(NO_KERNELCONFIG)
 627         cd ${KRNLCONFDIR}; \
 628                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 629                         ${KERNCONFDIR}/${_kernel}
 630 .endif
 631 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 632         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 633 .endif
 634         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 635         cd ${KRNLOBJDIR}/${_kernel}; \
 636             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 637             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 638 .if !defined(NO_KERNELDEPEND)
 639         cd ${KRNLOBJDIR}/${_kernel}; \
 640             ${MAKE} KERNEL=${INSTKERNNAME} depend
 641 .endif
 642         cd ${KRNLOBJDIR}/${_kernel}; \
 643             ${MAKE} KERNEL=${INSTKERNNAME} all
 644         @echo "--------------------------------------------------------------"
 645         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 646         @echo "--------------------------------------------------------------"
 647 .endfor
 648
 649 # The quickkernel target rebuilds the specified kernels as quickly
 650 # as possible.  It will use the native tools or the buildworld cross tools
 651 # based on whether the kernel was originally generated via buildkernel or
 652 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 653 # nor is the make depend step run.
 654 #
 655 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 656 .for _kernel in ${BUILDKERNELS}
 657         @echo "--------------------------------------------------------------"
 658         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 659         @echo "--------------------------------------------------------------"
 660         @echo "===> ${_kernel}"
 661 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 662 .if !defined(NO_KERNELCONFIG)
 663         cd ${KRNLCONFDIR}; \
 664                 PATH=${STRICTTMPPATH} \
 665                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 666                         ${KERNCONFDIR}/${_kernel}
 667 .endif
 668         cd ${KRNLOBJDIR}/${_kernel}; \
 669             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 670 .else
 671 .if !defined(NO_KERNELCONFIG)
 672         cd ${KRNLCONFDIR}; \
 673             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 674                 ${KERNCONFDIR}/${_kernel}
 675 .endif
 676         cd ${KRNLOBJDIR}/${_kernel}; \
 677             ${MAKE} KERNEL=${INSTKERNNAME} all
 678 .endif
 679         @echo "--------------------------------------------------------------"
 680         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 681         @echo "--------------------------------------------------------------"
 682 .endfor
 683
 684
 685 # installkernel
 686 #
 687 # Install the kernel defined by INSTALLKERNEL
 688 #
 689 installkernel reinstallkernel:
 690 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 691         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 692             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 693 .else
 694         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 695             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 696 .endif
 697
 698 #
 699 # most
 700 #
 701 # Build most of the user binaries on the existing system libs and includes.
 702 #
 703 most:
 704         @echo "--------------------------------------------------------------"
 705         @echo ">>> Building programs only"
 706         @echo "--------------------------------------------------------------"
 707 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 708         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 709 .endfor
 710
 711 #
 712 # installmost
 713 #
 714 # Install the binaries built by the 'most' target.  This does not include
 715 # libraries or include files.
 716 #
 717 installmost:
 718         @echo "--------------------------------------------------------------"
 719         @echo ">>> Installing programs only"
 720         @echo "--------------------------------------------------------------"
 721 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 722         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 723 .endfor
 724
 725 #
 726 # ------------------------------------------------------------------------
 727 #
 728 # From here onwards are utility targets used by the 'make world' and
 729 # related targets.  If your 'world' breaks, you may like to try to fix
 730 # the problem and manually run the following targets to attempt to
 731 # complete the build.  Beware, this is *not* guaranteed to work, you
 732 # need to have a pretty good grip on the current state of the system
 733 # to attempt to manually finish it.  If in doubt, 'make world' again.
 734 #
 735
 736 # bootstrap-tools: Build all tools required to build all tools.  Note that
 737 # order is important in a number of cases and also note that the bootstrap
 738 # and build tools stages have access to earlier binaries they themselves
 739 # had generated.
 740 #
 741 # patch:        older patch's do not have -i.  This program must be built
 742 #               first so other bootstrap tools that need to apply patches
 743 #               can use it.
 744 # [x]install:   dependancies on various new install features
 745 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 746 #               envs are not compatible with older objformat binaries.
 747 #
 748 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
 749 _strfile=       games/fortune/strfile
 750 .endif
 751
 752 bootstrap-tools:
 753         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 754 .for _tool in ${_strfile} \
 755     usr.bin/patch \
 756     bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
 757     bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
 758     bin/hostname bin/kill \
 759     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 760     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
 761     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 762     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 763     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 764     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 765     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 766     usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 767     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 768     usr.bin/tail \
 769     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 770     usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
 771     gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
 772     usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
 773         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 774                 cd ${.CURDIR}/${_tool}; \
 775                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 776                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 777                 ${MAKE} DIRPRFX=${_tool}/ all; \
 778                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 779 .endfor
 780         touch ${BTOOLSDEST}/.bootstrap_done
 781
 782 # build-tools: Build special purpose build tools.
 783 #
 784 # XXX we may be able to remove or consolidate this into bootstrap-tools
 785 # now that we have the native helper (.nx/.no) infrastructure.
 786 #
 787 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
 788 _share= share/syscons/scrnmaps
 789 .endif
 790
 791 .if !defined(NO_GCC34)
 792 _gcc34_cross= gnu/usr.bin/cc34
 793 _gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools
 794 .endif
 795 _gcc41_cross= gnu/usr.bin/cc41
 796 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
 797 _binutils= gnu/usr.bin/binutils217
 798
 799 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 800     !defined(NO_CRYPT) && defined(WANT_KERBEROS)
 801 _libkrb5= kerberos5/tools kerberos5/lib/libroken kerberos5/lib/libvers \
 802     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 803 .endif
 804
 805 build-tools:
 806 .for _tool in ${_gcc34_tools} ${_gcc41_tools} ${_libkrb5} ${_share}
 807         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 808                 cd ${.CURDIR}/${_tool}; \
 809                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 810                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 811                 ${MAKE} DIRPRFX=${_tool}/ all; \
 812                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 813 .endfor
 814         touch ${BTOOLSDEST}/.build_done
 815
 816 #
 817 # cross-tools: Build cross-building tools
 818 #
 819 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 820 _btxld= usr.sbin/btxld
 821 .endif
 822
 823 cross-tools:
 824 .for _tool in ${_btxld} ${_binutils} \
 825               usr.bin/objformat usr.sbin/crunch/crunchide \
 826               ${_gcc34_cross} ${_gcc41_cross}
 827         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 828                 cd ${.CURDIR}/${_tool}; \
 829                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 830                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 831                 ${MAKE} DIRPRFX=${_tool}/ all; \
 832                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 833 .endfor
 834         touch ${CTOOLSDEST}/.cross_done
 835
 836 #
 837 # hierarchy - ensure that all the needed directories are present
 838 #
 839 hierarchy:
 840         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 841
 842 #
 843 # libraries - build all libraries, and install them under ${DESTDIR}.
 844 #
 845 # The list of libraries with dependents (${_prebuild_libs}) and their
 846 # interdependencies (__L) are built automatically by the
 847 # ${.CURDIR}/tools/make_libdeps.sh script.
 848 #
 849 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 850 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 851 #
 852 libraries:
 853 .if !defined(NO_GCC34)
 854         cd ${.CURDIR}; \
 855             HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \
 856                 ${MAKE} -f Makefile.inc1 _startup_libs34;
 857 .endif
 858         cd ${.CURDIR}; \
 859             HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
 860                 ${MAKE} -f Makefile.inc1 _startup_libs41;
 861         cd ${.CURDIR}; \
 862             ${MAKE} -f Makefile.inc1 _startup_libs; \
 863             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 864             ${MAKE} -f Makefile.inc1 _generic_libs;
 865         touch ${WORLDDEST}/.libraries_done
 866
 867 # These dependencies are not automatically generated:
 868 #
 869 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
 870 # shared libraries for ELF.  The target for _startup_libs34 is
 871 # specifically built using gcc34.  Same goes for _startup_libs41.
 872 #
 873 _startup_libs34=        gnu/lib/gcc34/csu gnu/lib/gcc34/libgcc
 874 _startup_libs41=        gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
 875 _startup_libs=          lib/libc lib/libc_rtld
 876
 877 _prebuild_libs=         lib/libbz2 lib/libz lib/libarchive
 878 _prebuild_libs+=        lib/libutil
 879
 880 _generic_libs=  gnu/lib
 881
 882 .if !defined(NO_CRYPT) && defined(WANT_KERBEROS)
 883 _prebuild_libs+=        kerberos5/tools
 884 _prebuild_libs+=        kerberos5/lib/libasn1
 885 _prebuild_libs+=        kerberos5/lib/libgssapi
 886 _prebuild_libs+=        kerberos5/lib/libkrb5
 887 _prebuild_libs+=        kerberos5/lib/libroken
 888 _generic_libs+= kerberos5/lib
 889 .endif
 890
 891 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 892                 lib/libncurses/libncurses lib/libopie lib/libradius \
 893                 lib/libsbuf lib/libtacplus lib/libm \
 894                 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
 895
 896 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 897
 898 _generic_libs+= lib
 899
 900 .if !defined(NO_CRYPT)
 901 .if !defined(NO_OPENSSL)
 902 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 903 .if !defined(NO_OPENSSH)
 904 _prebuild_libs+=        secure/lib/libssh
 905 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 906 .endif
 907 .endif
 908 _generic_libs+= secure/lib
 909 .endif
 910
 911 _generic_libs+= usr.bin/lex/lib
 912
 913 .for _lib in ${_startup_libs34} ${_startup_libs41} \
 914                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 915 ${_lib}__L: .PHONY
 916 .if exists(${.CURDIR}/${_lib})
 917         ${ECHODIR} "===> ${_lib}"; \
 918                 cd ${.CURDIR}/${_lib}; \
 919                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 920                 ${MAKE} DIRPRFX=${_lib}/ all; \
 921                 ${MAKE} DIRPRFX=${_lib}/ install
 922 .endif
 923 .endfor
 924
 925 _startup_libs: ${_startup_libs:S/$/__L/}
 926 _startup_libs34: ${_startup_libs34:S/$/__L/}
 927 _startup_libs41: ${_startup_libs41:S/$/__L/}
 928 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 929 _generic_libs: ${_generic_libs:S/$/__L/}
 930
 931 # library targets must be ordered because there are inter-library
 932 # races (e.g. generation of tconfig.h)
 933 #
 934 .ORDER: ${_startup_libs34:S/$/__L/}
 935 .ORDER: ${_startup_libs41:S/$/__L/}
 936 .ORDER: ${_startup_libs:S/$/__L/}
 937 .ORDER: ${_prebuild_libs:S/$/__L/}
 938 .ORDER: ${_generic_libs:S/$/__L/}
 939
 940 .for __target in clean cleandepend cleandir obj depend includes
 941 .for entry in ${SUBDIR}
 942 ${entry}.${__target}__D: .PHONY
 943         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 944                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 945                 edir=${entry}.${MACHINE_ARCH}; \
 946                 cd ${.CURDIR}/$${edir}; \
 947         else \
 948                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 949                 edir=${entry}; \
 950                 cd ${.CURDIR}/$${edir}; \
 951         fi; \
 952         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 953 .endfor
 954 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 955 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 956 .endfor
 957 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 958
 959 # The wmake target is used by /usr/bin/wmake to run make in a
 960 # world build environment.
 961 #
 962 wmake:
 963         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 964
 965 wmakeenv:
 966         @echo '${WMAKEENV} /bin/sh'
 967
 968 bmake:
 969         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 970
 971 bmakeenv:
 972         @echo '${BMAKEENV} /bin/sh'
 973
 974 tmake:
 975         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
 976
 977 tmakeenv:
 978         @echo '${TMAKEENV} /bin/sh'
 979
 980 xmake:
 981         @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
 982
 983 xmakeenv:
 984         @echo '${XMAKEENV} /bin/sh'
 985
 986 .include <bsd.subdir.mk>
 987