runtest.exp

   1 # runtest.exp -- Test framework driver
   2 # Copyright (C) 1992-2019, 2020 Free Software Foundation, Inc.
   3 #
   4 # This file is part of DejaGnu.
   5 #
   6 # DejaGnu is free software; you can redistribute it and/or modify it
   7 # under the terms of the GNU General Public License as published by
   8 # the Free Software Foundation; either version 3 of the License, or
   9 # (at your option) any later version.
  10 #
  11 # DejaGnu is distributed in the hope that it will be useful, but
  12 # WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14 # General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU General Public License
  17 # along with DejaGnu; if not, write to the Free Software Foundation,
  18 # Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  19
  20 # This file was written by Rob Savoye <rob@welcomehome.org>.
  21
  22 set frame_version       1.6.3-rc1
  23 if {![info exists argv0]} {
  24     send_error "Must use a version of Expect greater than 5.0\n"
  25     exit 1
  26 }
  27
  28 # trap some signals so we know whats happening. These definitions are only
  29 # temporary until we read in the library stuff
  30 #
  31 trap { send_user "\ninterrupted by user\n"; exit 130 } SIGINT
  32 trap { send_user "\nquit\n";                exit 131 } SIGQUIT
  33 trap { send_user "\nterminated\n";          exit 143 } SIGTERM
  34
  35 #
  36 # Initialize a few global variables used by all tests.
  37 # `reset_vars' resets several of these, we define them here to document their
  38 # existence.  In fact, it would be nice if all globals used by some interface
  39 # of dejagnu proper were documented here.
  40 #
  41 # Keep these all lowercase.  Interface variables used by the various
  42 # testsuites (eg: the gcc testsuite) should be in all capitals
  43 # (eg: TORTURE_OPTIONS).
  44 #
  45 set mail_logs   0               ;# flag for mailing of summary and diff logs
  46 set psum_file   "latest"        ;# file name of previous summary to diff against
  47
  48 set exit_status 0               ;# exit code returned by this program
  49
  50 set xfail_flag  0               ;# indicates that a failure is expected
  51 set xfail_prms  0               ;# GNATS prms id number for this expected failure
  52 set kfail_flag  0               ;# indicates that it is a known failure
  53 set kfail_prms  0               ;# bug id for the description of the known failure
  54 set sum_file    ""              ;# name of the file that contains the summary log
  55 set base_dir    ""              ;# the current working directory
  56 set xml_file    ""              ;# handle on the XML file if requested
  57 set xml         0               ;# flag for requesting xml
  58 set logname     ""              ;# the users login name
  59 set prms_id     0               ;# GNATS prms id number
  60 set bug_id      0               ;# optional bug id number
  61 set dir         ""              ;# temp variable for directory names
  62 set srcdir      "."             ;# source directory containing the test suite
  63 set ignoretests ""              ;# list of tests to not execute
  64 set objdir      "."             ;# directory where test case binaries live
  65 set reboot      0
  66 set multipass   ""              ;# list of passes and var settings
  67 set errno       "";             ;#
  68 set exit_error  1               ;# Toggle for whether to set the exit status
  69                                 ;# on Tcl bugs in test case drivers.
  70 #
  71 # These describe the host and target environments.
  72 #
  73 set build_triplet  ""           ;# type of architecture to run tests on
  74 set build_os       ""           ;# type of os the tests are running on
  75 set build_vendor   ""           ;# vendor name of the OS or workstation the test are running on
  76 set build_cpu      ""           ;# type of the cpu tests are running on
  77 set host_triplet   ""           ;# type of architecture to run tests on, sometimes remotely
  78 set host_os        ""           ;# type of os the tests are running on
  79 set host_vendor    ""           ;# vendor name of the OS or workstation the test are running on
  80 set host_cpu       ""           ;# type of the cpu tests are running on
  81 set target_triplet ""           ;# type of architecture to run tests on, final remote
  82 set target_os      ""           ;# type of os the tests are running on
  83 set target_vendor  ""           ;# vendor name of the OS or workstation the test are running on
  84 set target_cpu     ""           ;# type of the cpu tests are running on
  85 set target_alias   ""           ;# standard abbreviation of target
  86 set compiler_flags ""           ;# the flags used by the compiler
  87
  88 #
  89 # These set configuration file names and are local to this file.
  90 #
  91 set local_init_file     site.exp        ;# testsuite-local init file name
  92 set global_init_file    site.exp        ;# global init file name
  93
  94 #
  95 # These are used to locate parts of the testsuite.
  96 #
  97 set testsuitedir        "testsuite"     ;# top-level testsuite source directory
  98 set testbuilddir        "testsuite"     ;# top-level testsuite object directory
  99
 100 #
 101 # Collected errors
 102 #
 103 namespace eval ::dejagnu::error {
 104     # list of { file message errorCode errorInfo } lists
 105     variable list [list]
 106 }
 107
 108 # Various ccache versions provide incorrect debug info such as ignoring
 109 # different current directory, breaking GDB testsuite.
 110 set env(CCACHE_DISABLE) 1
 111 unset -nocomplain env(CCACHE_NODISABLE)
 112
 113 #
 114 # some convenience abbreviations
 115 #
 116 set hex "0x\[0-9A-Fa-f\]+"
 117 set decimal "\[0-9\]+"
 118
 119 #
 120 # set the base dir (current working directory)
 121 #
 122 set base_dir [pwd]
 123
 124 #
 125 # These are set here instead of the init module so they can be overridden
 126 # by command line options.
 127 #
 128 set all_flag    0
 129 set binpath     ""
 130 set debug       0
 131 set options     ""
 132 set outdir      "."
 133 set reboot      1
 134 set tracelevel  0
 135 set verbose     0
 136 set log_dialog  0
 137
 138 #
 139 # verbose [-n] [-log] [--] message [level]
 140 #
 141 # Print MESSAGE if the verbose level is >= LEVEL.
 142 # The default value of LEVEL is 1.
 143 # "-n" says to not print a trailing newline.
 144 # "-log" says to add the text to the log file even if it won't be printed.
 145 # Note that the apparent behaviour of `send_user' dictates that if the message
 146 # is printed it is also added to the log file.
 147 # Use "--" if MESSAGE begins with "-".
 148 #
 149 # This is defined here rather than in framework.exp so we can use it
 150 # while still loading in the support files.
 151 #
 152 proc verbose { args } {
 153     global verbose
 154     set newline 1
 155     set logfile 0
 156
 157     set i 0
 158     if { [string index [lindex $args 0] 0] eq "-" } {
 159         for { set i 0 } { $i < [llength $args] } { incr i } {
 160             if { [lindex $args $i] eq "--" } {
 161                 incr i
 162                 break
 163             } elseif { [lindex $args $i] eq "-n" } {
 164                 set newline 0
 165             } elseif { [lindex $args $i] eq "-log" } {
 166                 set logfile 1
 167             } elseif { [lindex $args $i] eq "-x" } {
 168                 set xml 1
 169             } elseif { [string index [lindex $args $i] 0] eq "-" } {
 170                 clone_output "ERROR: verbose: illegal argument: [lindex $args $i]"
 171                 return
 172             } else {
 173                 break
 174             }
 175         }
 176         if { [llength $args] == $i } {
 177             clone_output "ERROR: verbose: nothing to print"
 178             return
 179         }
 180     }
 181
 182     set level 1
 183     if { [llength $args] > $i + 1 } {
 184         set level [lindex $args [expr { $i + 1 }]]
 185     }
 186     set message [lindex $args $i]
 187
 188     if { $verbose >= $level } {
 189         # We assume send_user also sends the text to the log file (which
 190         # appears to be the case though the docs aren't clear on this).
 191         if { $newline } {
 192             send_user -- "$message\n"
 193         } else {
 194             send_user -- $message
 195         }
 196     } elseif { $logfile } {
 197         if { $newline } {
 198             send_log -- "$message\n"
 199         } else {
 200             send_log -- $message
 201         }
 202     }
 203 }
 204
 205 #
 206 # Transform a tool name to get the installed name.
 207 # target_triplet is the canonical target name.  target_alias is the
 208 # target name used when configure was run.
 209 #
 210 proc transform { name } {
 211     global target_triplet
 212     global target_alias
 213     global host_triplet
 214     global board
 215
 216     if { $target_triplet eq $host_triplet } {
 217         return $name
 218     }
 219     if { $target_triplet eq "native" } {
 220         return $name
 221     }
 222     if {[board_info host exists no_transform_name]} {
 223         return $name
 224     }
 225     if { $target_triplet eq "" } {
 226         return $name
 227     } else {
 228         if {[info exists board]} {
 229             if {[board_info $board exists target_install]} {
 230                 set target_install [board_info $board target_install]
 231             }
 232         }
 233         if {[target_info exists target_install]} {
 234             set target_install [target_info target_install]
 235         }
 236         if {[info exists target_alias]} {
 237             set tmp $target_alias-$name
 238         } elseif {[info exists target_install]} {
 239             if { [lsearch -exact $target_install $target_alias] >= 0 } {
 240                 set tmp $target_alias-$name
 241             } else {
 242                 set tmp "[lindex $target_install 0]-$name"
 243             }
 244         }
 245         verbose "Transforming $name to $tmp"
 246         return $tmp
 247     }
 248 }
 249
 250 #
 251 # findfile arg0 [arg1] [arg2]
 252 #
 253 # Find a file and see if it exists. If you only care about the false
 254 # condition, then you'll need to pass a null "" for arg1.
 255 #       arg0 is the filename to look for. If the only arg,
 256 #            then that's what gets returned. If this is the
 257 #            only arg, then if it exists, arg0 gets returned.
 258 #            if it doesn't exist, return only the prog name.
 259 #       arg1 is optional, and it's what gets returned if
 260 #            the file exists.
 261 #       arg2 is optional, and it's what gets returned if
 262 #            the file doesn't exist.
 263 #
 264 proc findfile { args } {
 265     # look for the file
 266     verbose "Seeing if [lindex $args 0] exists." 2
 267     if {[file exists [lindex $args 0]]} {
 268         if { [llength $args] > 1 } {
 269             verbose "Found file, returning [lindex $args 1]"
 270             return [lindex $args 1]
 271         } else {
 272             verbose "Found file, returning [lindex $args 0]"
 273             return [lindex $args 0]
 274         }
 275     } else {
 276         if { [llength $args] > 2 } {
 277             verbose "Didn't find file [lindex $args 0], returning [lindex $args 2]"
 278             return [lindex $args 2]
 279         } else {
 280             verbose "Didn't find file, returning [file tail [lindex $args 0]]"
 281             return [transform [file tail [lindex $args 0]]]
 282         }
 283     }
 284 }
 285
 286 #
 287 # load_file [-1] [--] file1 [ file2 ... ]
 288 #
 289 # Utility to source a file.  All are sourced in order unless the flag "-1"
 290 # is given in which case we stop after finding the first one.
 291 # The result is 1 if a file was found, 0 if not.
 292 # If a tcl error occurs while sourcing a file, we print an error message
 293 # and exit.
 294 #
 295 proc load_file { args } {
 296     set i 0
 297     set only_one 0
 298     if { [lindex $args $i] eq "-1" } {
 299         set only_one 1
 300         incr i
 301     }
 302     if { [lindex $args $i] eq "--" } {
 303         incr i
 304     }
 305
 306     set found 0
 307     foreach file [lrange $args $i end] {
 308         verbose "Looking for $file" 2
 309         # In Tcl, "file exists" fails if the filename looks like
 310         # ~/FILE and the environment variable HOME does not exist.
 311         if {! [catch {file exists $file} result] && $result} {
 312             set found 1
 313             verbose "Found $file"
 314             if { [catch "uplevel #0 source $file"] == 1 } {
 315                 send_error "ERROR: tcl error sourcing $file.\n"
 316                 global errorInfo
 317                 if {[info exists errorInfo]} {
 318                     send_error "$errorInfo\n"
 319                 }
 320                 exit 1
 321             }
 322             if { $only_one } {
 323                 break
 324             }
 325         }
 326     }
 327     return $found
 328 }
 329
 330 #
 331 # search_and_load_file -- search DIRLIST looking for FILELIST.
 332 # TYPE is used when displaying error and progress messages.
 333 #
 334 proc search_and_load_file { type filelist dirlist } {
 335     set found 0
 336
 337     foreach dir $dirlist {
 338         foreach initfile $filelist {
 339             set filename [file join $dir $initfile]
 340             verbose "Looking for $type $filename" 2
 341             if {[file exists $filename]} {
 342                 set found 1
 343                 set error ""
 344                 if { $type ne "library file" } {
 345                     send_user "Using $filename as $type.\n"
 346                 } else {
 347                     verbose "Loading $filename"
 348                 }
 349                 if {[catch "uplevel #0 source $filename" error] == 1} {
 350                     global errorInfo
 351                     send_error "ERROR: tcl error sourcing $type $filename.\n$error\n"
 352                     if {[info exists errorInfo]} {
 353                         send_error "$errorInfo\n"
 354                     }
 355                     exit 1
 356                 }
 357                 break
 358             }
 359         }
 360         if { $found } {
 361             break
 362         }
 363     }
 364     return $found
 365 }
 366
 367 #
 368 # Give a usage statement.
 369 #
 370 proc usage { } {
 371     global tool
 372
 373     send_user "USAGE: runtest \[options...\]\n"
 374     send_user "\t--all, -a\t\tPrint all test output to screen\n"
 375     send_user "\t--build \[triplet\]\tThe canonical triplet of the build machine\n"
 376     send_user "\t--debug\t\t\tSet expect debugging ON\n"
 377     send_user "\t--directory name\tRun only the tests in directory 'name'\n"
 378     send_user "\t--global_init \[name\]\tThe file to load for global configuration\n"
 379     send_user "\t--help\t\t\tPrint help text\n"
 380     send_user "\t--host \[triplet\]\tThe canonical triplet of the host machine\n"
 381     send_user "\t--host_board \[name\]\tThe host board to use\n"
 382     send_user "\t--ignore \[name(s)\]\tThe names of specific tests to ignore\n"
 383     send_user "\t--local_init \[name\]\tThe file to load for local configuration\n"
 384     send_user "\t--log_dialog\t\t\Emit Expect output on stdout\n"
 385     send_user "\t--mail \[name(s)\]\tWhom to mail the results to\n"
 386     send_user "\t--objdir \[name\]\t\tThe test suite binary directory\n"
 387     send_user "\t--outdir \[name\]\t\tThe directory to put logs in\n"
 388     send_user "\t--reboot\t\tReboot the target (if supported)\n"
 389     send_user "\t--srcdir \[name\]\t\tThe test suite source code directory\n"
 390     send_user "\t--status\t\tSet the exit status to fail on Tcl errors\n"
 391     send_user "\t--strace \[number\]\tTurn on Expect tracing\n"
 392     send_user "\t--target \[triplet\]\tThe canonical triplet of the target board\n"
 393     send_user "\t--target_board \[name(s)\] The list of target boards to run tests on\n"
 394     send_user "\t--tool \[name(s)\]\tRun tests on these tools\n"
 395     send_user "\t--tool_exec \[name\]\tThe path to the tool executable to test\n"
 396     send_user "\t--tool_opts \[options\]\tA list of additional options to pass to the tool\n"
 397     send_user "\t--verbose, -v\t\tProduce verbose output\n"
 398     send_user "\t--version, -V\t\tPrint all relevant version numbers\n"
 399     send_user "\t--xml, -x\t\tWrite out an XML results file\n"
 400     send_user "\t--D\[0-1\]\t\tTcl debugger\n"
 401     send_user "\tscript.exp\[=arg(s)\]\tRun these tests only\n"
 402     if { [info exists tool] } {
 403         if { [info procs ${tool}_option_help] ne "" } {
 404             ${tool}_option_help
 405         }
 406     }
 407 }
 408
 409 #
 410 # Parse the arguments the first time looking for these.  We will ultimately
 411 # parse them twice.  Things are complicated because:
 412 # - we want to parse --verbose early on
 413 # - we don't want config files to override command line arguments
 414 #   (eg: $base_dir/$local_init_file vs --host/--target)
 415 # - we need some command line arguments before we can process some config files
 416 #   (eg: --objdir before $objdir/$local_init_file, --host/--target before $DEJAGNU)
 417 # The use of `arg_host_triplet' and `arg_target_triplet' lets us avoid parsing
 418 # the arguments three times.
 419 #
 420
 421 namespace eval ::dejagnu::command_line {
 422     variable cmd_var_list [list]
 423
 424     proc save_cmd_var {name} {
 425         variable cmd_var_list
 426
 427         upvar 1 $name target_var
 428         lappend cmd_var_list $name $target_var
 429     }
 430
 431     proc restore_cmd_vars {} {
 432         variable cmd_var_list
 433
 434         foreach {name value} $cmd_var_list {
 435             uplevel 1 set $name $value
 436         }
 437         verbose "Variables set by command line arguments restored." 4
 438     }
 439
 440     proc dump_cmd_vars {} {
 441         variable cmd_var_list
 442
 443         verbose "Variables set by command line arguments:" 4
 444         foreach {name value} $cmd_var_list {
 445             verbose "  $name -> $value" 4
 446         }
 447     }
 448 }
 449
 450 set arg_host_triplet ""
 451 set arg_target_triplet ""
 452 set arg_build_triplet ""
 453 set argc [ llength $argv ]
 454 for { set i 0 } { $i < $argc } { incr i } {
 455     set option [lindex $argv $i]
 456
 457     # make all options have two hyphens
 458     switch -glob -- $option {
 459         "--*" {
 460         }
 461         "-*" {
 462             set option "-$option"
 463         }
 464     }
 465
 466     # split out the argument for options that take them
 467     switch -glob -- $option {
 468         "--*=*" {
 469             regexp {^[^=]*=(.*)$} $option nil optarg
 470         }
 471         "--bu*" -
 472         "--g*" -
 473         "--ho*" -
 474         "--ig*"  -
 475         "--loc*" -
 476         "--m*"  -
 477         "--ob*" -
 478         "--ou*" -
 479         "--sr*" -
 480         "--str*" -
 481         "--ta*" -
 482         "--di*" -
 483         "--to*" {
 484             incr i
 485             set optarg [lindex $argv $i]
 486         }
 487     }
 488
 489     switch -glob -- $option {
 490         "--V*" -
 491         "--vers*" {                     # (--version) version numbers
 492             send_user "DejaGnu version\t$frame_version\n"
 493             send_user "Expect version\t[exp_version]\n"
 494             send_user "Tcl version\t[ info tclversion ]\n"
 495             exit 0
 496         }
 497
 498         "--bu*" {                       # (--build) the build host configuration
 499             set arg_build_triplet $optarg
 500             ::dejagnu::command_line::save_cmd_var arg_build_triplet
 501             continue
 502         }
 503
 504         "--g*" {                        # (--global_init) the global init file name
 505             set global_init_file $optarg
 506             ::dejagnu::command_line::save_cmd_var global_init_file
 507             continue
 508         }
 509
 510         "--host_bo*" {
 511             set host_board $optarg
 512             ::dejagnu::command_line::save_cmd_var host_board
 513             continue
 514         }
 515
 516         "--ho*" {                       # (--host) the host configuration
 517             set arg_host_triplet $optarg
 518             ::dejagnu::command_line::save_cmd_var arg_host_triplet
 519             continue
 520         }
 521
 522         "--loc*" {                      # (--local_init) the local init file name
 523             set local_init_file $optarg
 524             ::dejagnu::command_line::save_cmd_var local_init_file
 525             continue
 526         }
 527
 528         "--ob*" {                       # (--objdir) where the test case object code lives
 529             set objdir $optarg
 530             ::dejagnu::command_line::save_cmd_var objdir
 531             continue
 532         }
 533
 534         "--sr*" {                       # (--srcdir) where the testsuite source code lives
 535             set srcdir $optarg
 536             ::dejagnu::command_line::save_cmd_var srcdir
 537             continue
 538         }
 539
 540         "--target_bo*" {
 541             set target_list $optarg
 542             ::dejagnu::command_line::save_cmd_var target_list
 543             continue
 544         }
 545
 546         "--ta*" {                       # (--target) the target configuration
 547             set arg_target_triplet $optarg
 548             ::dejagnu::command_line::save_cmd_var arg_target_triplet
 549             continue
 550         }
 551
 552         "--tool_opt*" {
 553             set TOOL_OPTIONS $optarg
 554             ::dejagnu::command_line::save_cmd_var TOOL_OPTIONS
 555             continue
 556         }
 557
 558         "--tool_exec*" {
 559             set TOOL_EXECUTABLE $optarg
 560             ::dejagnu::command_line::save_cmd_var TOOL_EXECUTABLE
 561             continue
 562         }
 563
 564         "--to*" {                       # (--tool) specify tool name
 565             set tool $optarg
 566             set comm_line_tool $optarg
 567             ::dejagnu::command_line::save_cmd_var tool
 568             ::dejagnu::command_line::save_cmd_var comm_line_tool
 569             continue
 570         }
 571
 572         "--di*" {
 573             set cmdline_dir_to_run $optarg
 574             ::dejagnu::command_line::save_cmd_var cmdline_dir_to_run
 575             continue
 576         }
 577
 578         "--v" -
 579         "--verb*" {                     # (--verbose) verbose output
 580             incr verbose
 581             continue
 582         }
 583
 584         "[A-Z0-9_-.]*=*" { # process makefile style args like CC=gcc, etc...
 585             if {[regexp "^(\[A-Z0-9_-\]+)=(.*)$" $option junk var val]} {
 586                 set $var $val
 587                 verbose "$var is now $val"
 588                 append makevars "set $var $val;" ;# FIXME: Used anywhere?
 589                 unset junk var val
 590             } else {
 591                 send_error "Illegal variable specification:\n"
 592                 send_error "$option\n"
 593             }
 594             continue
 595         }
 596
 597     }
 598 }
 599 verbose "Verbose level is $verbose"
 600
 601 verbose [concat "Initial working directory is" [pwd]]
 602
 603 ::dejagnu::command_line::dump_cmd_vars
 604
 605 #
 606 # get the users login name
 607 #
 608 if { $logname eq "" } {
 609     if {[info exists env(USER)]} {
 610         set logname $env(USER)
 611     } else {
 612         if {[info exists env(LOGNAME)]} {
 613             set logname $env(LOGNAME)
 614         } else {
 615             # try getting it with whoami
 616             catch "set logname [exec whoami]" tmp
 617             if {[string match "*couldn't find*to execute*" $tmp]} {
 618                 # try getting it with who am i
 619                 unset tmp
 620                 catch "set logname [exec who am i]" tmp
 621                 if {[string match "*Command not found*" $tmp]} {
 622                     send_user "ERROR: couldn't get the users login name\n"
 623                     set logname "Unknown"
 624                 } else {
 625                     set logname [lindex [split $logname " !"] 1]
 626                 }
 627             }
 628         }
 629     }
 630 }
 631
 632 verbose "Login name is $logname"
 633
 634 #
 635 # lookfor_file -- try to find a file by searching up multiple directory levels
 636 #
 637 proc lookfor_file { dir name } {
 638     foreach x [list . .. ../.. ../../.. ../../../..] {
 639         verbose $dir/$x/$name 2
 640         if {[file exists [file join $dir $name]]} {
 641             return [file join $dir $name]
 642         }
 643         set dir [remote_file build dirname $dir]
 644     }
 645     return ""
 646 }
 647
 648 #
 649 # load_lib -- load a library by sourcing it
 650 #
 651 # If there a multiple files with the same name, stop after the first one found.
 652 # The order is first look in the install dir, then in a parallel dir in the
 653 # source tree (up one or two levels), then in the current dir.
 654 #
 655 proc load_lib { file } {
 656     global verbose execpath tool
 657     global libdir libdirs srcdir testsuitedir base_dir
 658     global loaded_libs
 659
 660     if {[info exists loaded_libs($file)]} {
 661         return
 662     }
 663
 664     set loaded_libs($file) ""
 665     set search_dirs [list ../lib $libdir $libdir/lib]
 666     lappend search_dirs [file dirname [file dirname $srcdir]]/dejagnu/lib
 667     lappend search_dirs $testsuitedir/lib
 668     lappend search_dirs $execpath/lib "."
 669     lappend search_dirs [file dirname [file dirname [file dirname $srcdir]]]/dejagnu/lib
 670     if {[info exists libdirs]} {
 671         lappend search_dirs $libdirs
 672     }
 673     if { [search_and_load_file "library file" $file $search_dirs ] == 0 } {
 674         send_error "ERROR: Couldn't find library file $file.\n"
 675         exit 1
 676     }
 677 }
 678
 679 #
 680 # Begin sourcing the config files.
 681 # All are sourced in order.
 682 #
 683 # Search order:
 684 #    (local)    $base_dir/$local_init_file -> $objdir/$local_init_file ->
 685 #    (global)   installed($global_init_file) -> $DEJAGNU -> $HOME/.dejagnurc
 686 #
 687 # For the normal case, we expect $base_dir/$local_init_file to set
 688 # host_triplet and target_triplet.
 689 #
 690
 691 load_file [file join $base_dir $local_init_file]
 692
 693 # Ensure that command line parameters override testsuite init files.
 694 ::dejagnu::command_line::restore_cmd_vars
 695
 696 #
 697 # If objdir didn't get set in $base_dir/$local_init_file, set it to
 698 # $base_dir.  Make sure we source $objdir/$local_init_file in case
 699 # $base_dir/$local_init_file doesn't exist and objdir was given on the
 700 # command line.
 701 #
 702
 703 if { $objdir eq "." || $objdir eq $srcdir } {
 704     set objdir $base_dir
 705 } else {
 706     load_file [file join $objdir $local_init_file]
 707 }
 708
 709 # Ensure that command line parameters override testsuite init files.
 710 ::dejagnu::command_line::restore_cmd_vars
 711
 712 #
 713 # Find the testsuite.
 714 #
 715
 716 # The DejaGnu manual has always stated that a testsuite must be in a
 717 # testsuite/ subdirectory.
 718
 719 verbose "Finding testsuite ..." 3
 720 verbose "\$base_dir -> $base_dir" 3
 721 verbose "\$srcdir -> $srcdir" 3
 722 verbose "\$objdir -> $objdir" 3
 723 verbose [concat "file tail \$srcdir -> " [file tail $srcdir]] 3
 724 verbose [concat "file join \$srcdir testsuite -> " \
 725              [file join $srcdir testsuite]] 3
 726 verbose [concat "file isdirectory [file join \$srcdir testsuite] -> " \
 727              [file isdirectory [file join $srcdir testsuite]]] 3
 728 verbose [concat "file tail \$base_dir -> " [file tail $base_dir]] 3
 729
 730 if { [file tail $srcdir] eq "testsuite" } {
 731     # Subdirectory case -- $srcdir includes testsuite/
 732     set testsuitedir $srcdir
 733     set testbuilddir $objdir
 734 } elseif { [file tail $srcdir] ne "testsuite"
 735            && [file isdirectory [file join $srcdir testsuite]] } {
 736     # Top-level case -- testsuite in $srcdir/testsuite/
 737     set testsuitedir [file join $srcdir testsuite]
 738     set testbuilddir [file join $objdir testsuite]
 739 } elseif { $srcdir eq "." && [file tail $base_dir] eq "testsuite" } {
 740     # Development scaffold case -- testsuite in ".", but "." is "testsuite"
 741     set testsuitedir $base_dir
 742     set testbuilddir $base_dir
 743 } else {
 744     if { $testsuitedir eq "testsuite" && $srcdir eq "." && $objdir eq "." } {
 745         # Broken legacy case -- testsuite not actually in testsuite/
 746         # Produce a warning, but continue.
 747         send_error "WARNING: testsuite is not in a testsuite/ directory.\n"
 748         set testsuitedir $srcdir
 749         set testbuilddir $objdir
 750     } else {
 751         # Custom case -- all variables are assumed to have been set correctly
 752     }
 753 }
 754
 755 verbose "Finding testsuite ... done" 3
 756
 757 # Well, this just demonstrates the real problem...
 758 if {![info exists tool_root_dir]} {
 759     set tool_root_dir [file dirname $objdir]
 760     if {[file exists [file join $tool_root_dir testsuite]]} {
 761         set tool_root_dir [file dirname $tool_root_dir]
 762     }
 763 }
 764
 765 verbose "Using test sources in $srcdir"
 766 verbose "Using test binaries in $objdir"
 767 verbose "Testsuite root is $testsuitedir"
 768 verbose "Tool root directory is $tool_root_dir"
 769
 770 set execpath [file dirname $argv0]
 771
 772 # The runtest.exp file is installed directly in libdir.
 773 # Conveniently, the source tree layout is the same as the installed libdir.
 774 set libdir [file dirname $argv0]
 775 if {[info exists env(DEJAGNULIBS)]} {
 776     set libdir $env(DEJAGNULIBS)
 777 }
 778 # list of extra search directories used by load_lib to look for libs
 779 set libdirs {}
 780
 781 verbose "Using $libdir to find libraries"
 782
 783 #
 784 # If the host or target was given on the command line, override the above
 785 # config files.  We allow $DEJAGNU to massage them though in case it would
 786 # ever want to do such a thing.
 787 #
 788 if { $arg_host_triplet ne "" } {
 789     set host_triplet $arg_host_triplet
 790 }
 791 if { $arg_build_triplet ne "" } {
 792     set build_triplet $arg_build_triplet
 793 }
 794
 795 # If we only specify --host, then that must be the build machine too,
 796 # and we're stuck using the old functionality of a simple cross test.
 797 if {[expr { $build_triplet eq ""  &&  $host_triplet ne "" } ]} {
 798     set build_triplet $host_triplet
 799 }
 800 # If we only specify --build, then we'll use that as the host too.
 801 if {[expr { $build_triplet ne "" && $host_triplet eq "" } ]} {
 802     set host_triplet $build_triplet
 803 }
 804 unset arg_host_triplet arg_build_triplet
 805
 806 #
 807 # If the build machine type hasn't been specified by now, use config.guess.
 808 #
 809
 810 if {[expr {$build_triplet eq "" && $host_triplet eq ""}]} {
 811     # find config.guess
 812     foreach dir [list $libdir $libdir/libexec $libdir/.. $execpath $srcdir $srcdir/.. $srcdir/../..] {
 813         verbose "Looking for $dir/config.guess" 2
 814         if {[file exists [file join $dir config.guess]]} {
 815             set config_guess [file join $dir config.guess]
 816             verbose "Found [file join $dir config.guess]"
 817             break
 818         }
 819     }
 820
 821     # get the canonical triplet
 822     if {![info exists config_guess]} {
 823         send_error "ERROR: Couldn't find config.guess program.\n"
 824         exit 1
 825     }
 826     catch "exec $config_guess" build_triplet
 827     switch -- $build_triplet {
 828         "No uname command or uname output not recognized" -
 829         "Unable to guess system type" {
 830             verbose "WARNING: Uname output not recognized"
 831             set build_triplet unknown
 832         }
 833     }
 834     verbose "Assuming build host is $build_triplet"
 835     if { $host_triplet eq "" } {
 836         set host_triplet $build_triplet
 837     }
 838 }
 839
 840 #
 841 # Figure out the target. If the target hasn't been specified, then we have to
 842 # assume we are native.
 843 #
 844 if { $arg_target_triplet ne "" } {
 845     set target_triplet $arg_target_triplet
 846 } elseif { $target_triplet eq "" } {
 847     set target_triplet $build_triplet
 848     verbose "Assuming native target is $target_triplet" 2
 849 }
 850 unset arg_target_triplet
 851 #
 852 # Default target_alias to target_triplet.
 853 #
 854 if {![info exists target_alias]} {
 855     set target_alias $target_triplet
 856 }
 857
 858 proc get_local_hostname { } {
 859     if {[catch "info hostname" hb]} {
 860         set hb ""
 861     } else {
 862         regsub "\\..*$" $hb "" hb
 863     }
 864     verbose "hostname=$hb" 3
 865     return $hb
 866 }
 867
 868 #
 869 # We put these here so that they can be overridden later by site.exp or
 870 # friends.
 871 #
 872 # Set up the target as machine NAME. We also load base-config.exp as a
 873 # default configuration. The config files are sourced with the global
 874 # variable $board set to the name of the current target being defined.
 875 #
 876 proc setup_target_hook { whole_name name } {
 877     global board
 878     global host_board
 879
 880     if {[info exists host_board]} {
 881         set hb $host_board
 882     } else {
 883         set hb [get_local_hostname]
 884     }
 885
 886     set board $whole_name
 887
 888     global board_type
 889     set board_type "target"
 890
 891     load_config base-config.exp
 892     if {![load_board_description $name $whole_name $hb]} {
 893         if { $name ne "unix" } {
 894             perror "couldn't load description file for $name"
 895             exit 1
 896         } else {
 897             load_generic_config "unix"
 898         }
 899     }
 900
 901     if {[board_info $board exists generic_name]} {
 902         load_tool_target_config [board_info $board generic_name]
 903     }
 904
 905     unset board
 906     unset board_type
 907
 908     push_target $whole_name
 909
 910     if { [info procs ${whole_name}_init] ne "" } {
 911         ${whole_name}_init $whole_name
 912     }
 913
 914     if { ![isnative] && ![isremote target] } {
 915         global env build_triplet target_triplet
 916         if { (![info exists env(DEJAGNU)]) && ($build_triplet ne $target_triplet) } {
 917             warning "Assuming target board is the local machine (which is probably wrong).\nYou may need to set your DEJAGNU environment variable."
 918         }
 919     }
 920 }
 921
 922 #
 923 # Clean things up afterwards.
 924 #
 925 proc cleanup_target_hook { name } {
 926     global tool
 927     # Clean up the target board.
 928     if { [info procs ${name}_exit] ne "" } {
 929         ${name}_exit
 930     }
 931     # We also call the tool exit routine here.
 932     if {[info exists tool]} {
 933         if { [info procs ${tool}_exit] ne "" } {
 934             ${tool}_exit
 935         }
 936     }
 937     remote_close target
 938     pop_target
 939 }
 940
 941 proc setup_host_hook { name } {
 942     global board
 943     global board_info
 944     global board_type
 945
 946     set board $name
 947     set board_type "host"
 948
 949     load_board_description $name
 950     unset board
 951     unset board_type
 952     push_host $name
 953     if { [info procs ${name}_init] ne "" } {
 954         ${name}_init $name
 955     }
 956 }
 957
 958 proc setup_build_hook { name } {
 959     global board
 960     global board_info
 961     global board_type
 962
 963     set board $name
 964     set board_type "build"
 965
 966     load_board_description $name
 967     unset board
 968     unset board_type
 969     push_build $name
 970     if { [info procs ${name}_init] ne "" } {
 971         ${name}_init $name
 972     }
 973 }
 974
 975 #
 976 # Find and load the global config file if it exists.
 977 # The global config file is used to set the connect mode and other
 978 # parameters specific to each particular target.
 979 # These files assume the host and target have been set.
 980 #
 981
 982 if { [load_file -- [file join $libdir $global_init_file]] == 0 } {
 983     # If $DEJAGNU isn't set either then there isn't any global config file.
 984     # Warn the user as there really should be one.
 985     if { ! [info exists env(DEJAGNU)] } {
 986         send_error "WARNING: Couldn't find the global config file.\n"
 987     }
 988 }
 989
 990 if {[info exists env(DEJAGNU)]} {
 991     if { [load_file -- $env(DEJAGNU)] == 0 } {
 992         # It may seem odd to only issue a warning if there isn't a global
 993         # config file, but issue an error if $DEJAGNU is erroneously defined.
 994         # Since $DEJAGNU is set there is *supposed* to be a global config file,
 995         # so the current behaviour seems reasonable.
 996         send_error "ERROR: global config file $env(DEJAGNU) not found.\n"
 997         exit 1
 998     }
 999     if {![info exists boards_dir]} {
1000         set boards_dir "[file dirname $env(DEJAGNU)]/boards"
1001     }
1002 }
1003
1004 # Load user .dejagnurc file last as the ultimate override.
1005 load_file ~/.dejagnurc
1006
1007 if {![info exists boards_dir]} {
1008     set boards_dir ""
1009 }
1010
1011 #
1012 # parse out the config parts of the triplet name
1013 #
1014
1015 # build values
1016 if { $build_cpu eq "" } {
1017     regsub -- "-.*-.*" $build_triplet "" build_cpu
1018 }
1019 if { $build_vendor eq "" } {
1020     regsub -- "^\[a-z0-9\]*-" $build_triplet "" build_vendor
1021     regsub -- "-.*" $build_vendor "" build_vendor
1022 }
1023 if { $build_os eq "" } {
1024     regsub -- ".*-.*-" $build_triplet "" build_os
1025 }
1026
1027 # host values
1028 if { $host_cpu eq "" } {
1029     regsub -- "-.*-.*" $host_triplet "" host_cpu
1030 }
1031 if { $host_vendor eq "" } {
1032     regsub -- "^\[a-z0-9\]*-" $host_triplet "" host_vendor
1033     regsub -- "-.*" $host_vendor "" host_vendor
1034 }
1035 if { $host_os eq "" } {
1036     regsub -- ".*-.*-" $host_triplet "" host_os
1037 }
1038
1039 # target values
1040 if { $target_cpu eq "" } {
1041     regsub -- "-.*-.*" $target_triplet "" target_cpu
1042 }
1043 if { $target_vendor eq "" } {
1044     regsub -- "^\[a-z0-9\]*-" $target_triplet "" target_vendor
1045     regsub -- "-.*" $target_vendor "" target_vendor
1046 }
1047 if { $target_os eq "" } {
1048     regsub -- ".*-.*-" $target_triplet "" target_os
1049 }
1050
1051 #
1052 # Load the primary tool initialization file.
1053 #
1054
1055 proc load_tool_init { file } {
1056     global srcdir testsuitedir
1057     global loaded_libs
1058
1059     if {[info exists loaded_libs(tool/$file)]} {
1060         return
1061     }
1062
1063     set loaded_libs(tool/$file) ""
1064
1065     lappend searchpath [file join $testsuitedir lib tool]
1066     lappend searchpath [file join $testsuitedir lib]
1067     # for legacy testsuites that might have files in lib/ instead of
1068     # testsuite/lib/ in the package source tree; deprecated
1069     lappend searchpath [file join $srcdir lib]
1070
1071     if { ![search_and_load_file "tool init file" [list $file] $searchpath] } {
1072         warning "Couldn't find tool init file"
1073     }
1074 }
1075
1076 #
1077 # load the testing framework libraries
1078 #
1079 load_lib utils.exp
1080 load_lib framework.exp
1081 load_lib debugger.exp
1082 load_lib remote.exp
1083 load_lib target.exp
1084 load_lib targetdb.exp
1085 load_lib libgloss.exp
1086
1087 # Initialize the test counters and reset them to 0.
1088 init_testcounts
1089 reset_vars
1090
1091 #
1092 # Parse the command line arguments.
1093 #
1094
1095 # Load the tool initialization file. Allow the --tool option to override
1096 # what's set in the site.exp file.
1097 if {[info exists comm_line_tool]} {
1098     set tool $comm_line_tool
1099 }
1100
1101 if {[info exists tool]} {
1102     load_tool_init ${tool}.exp
1103 }
1104
1105 set argc [ llength $argv ]
1106 for { set i 0 } { $i < $argc } { incr i } {
1107     set option [ lindex $argv $i ]
1108
1109     # make all options have two hyphens
1110     switch -glob -- $option {
1111         "--*" {
1112         }
1113         "-*" {
1114             set option "-$option"
1115         }
1116     }
1117
1118     # split out the argument for options that take them
1119     switch -glob -- $option {
1120         "--*=*" {
1121             regexp {^[^=]*=(.*)$} $option nil optarg
1122         }
1123         "--bu*" -
1124         "--g*" -
1125         "--ho*" -
1126         "--ig*"  -
1127         "--loc*" -
1128         "--m*"  -
1129         "--ob*" -
1130         "--ou*" -
1131         "--sr*" -
1132         "--str*" -
1133         "--ta*" -
1134         "--di*" -
1135         "--to*" {
1136             incr i
1137             set optarg [lindex $argv $i]
1138         }
1139     }
1140
1141     switch -glob -- $option {
1142         "--v*" {                        # (--verbose) verbose output
1143             # Already parsed.
1144             continue
1145         }
1146
1147         "--g*" {                        # (--global_init) the global init file name
1148             # Already parsed (and no longer useful).  The file has been loaded.
1149             continue
1150         }
1151
1152         "--loc*" {                      # (--local_init) the local init file name
1153             # Already parsed (and no longer useful).  The file has been loaded.
1154             continue
1155         }
1156
1157         "--bu*" {                       # (--build) the build host configuration
1158             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1159             continue
1160         }
1161
1162         "--ho*" {                       # (--host) the host configuration
1163             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1164             continue
1165         }
1166
1167         "--target_bo*" {
1168             # Set it again, father knows best.
1169             set target_list $optarg
1170             continue
1171         }
1172
1173         "--ta*" {                       # (--target) the target configuration
1174             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1175             continue
1176         }
1177
1178         "--a*" {                        # (--all) print all test output to screen
1179             set all_flag 1
1180             verbose "Print all test output to screen"
1181             continue
1182         }
1183
1184         "--di*" {
1185             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1186             continue
1187         }
1188
1189
1190         "--de*" {                       # (--debug) expect internal debugging
1191             if {[file exists ./dbg.log]} {
1192                 catch [file delete -force -- dbg.log]
1193             }
1194             if { $verbose > 2 } {
1195                 exp_internal -f dbg.log 1
1196             } else {
1197                 exp_internal -f dbg.log 0
1198             }
1199             verbose "Expect Debugging is ON"
1200             continue
1201         }
1202
1203         "--D[01]" {                     # (-Debug) turn on Tcl debugger
1204             # The runtest shell script handles this option, but it
1205             # still appears in the options in the Tcl code.
1206             verbose "Tcl debugger is ON"
1207             continue
1208         }
1209
1210         "--m*" {                        # (--mail) mail the output
1211             set mailing_list $optarg
1212             set mail_logs 1
1213             verbose "Mail results to $mailing_list"
1214             continue
1215         }
1216
1217         "--r*" {                        # (--reboot) reboot the target
1218             set reboot 1
1219             verbose "Will reboot the target (if supported)"
1220             continue
1221         }
1222
1223         "--ob*" {                       # (--objdir) where the test case object code lives
1224             # Already parsed, but parse again to make sure command line
1225             # options override any config file.
1226             set objdir $optarg
1227             verbose "Using test binaries in $objdir"
1228             continue
1229         }
1230
1231         "--ou*" {                       # (--outdir) where to put the output files
1232             set outdir $optarg
1233             verbose "Test output put in $outdir"
1234             continue
1235         }
1236
1237         "--log_dialog*" {
1238             incr log_dialog
1239             continue
1240         }
1241
1242         "*.exp" {                       #  specify test names to run
1243             set all_runtests($option) ""
1244             verbose "Running only tests $option"
1245             continue
1246         }
1247
1248         "*.exp=*" {                     #  specify test names to run
1249             set tmp [split $option "="]
1250             set all_runtests([lindex $tmp 0]) [lindex $tmp 1]
1251             verbose "Running only tests $option"
1252             unset tmp
1253             continue
1254         }
1255
1256         "--ig*" {                       #  (--ignore) specify test names to exclude
1257             set ignoretests $optarg
1258             verbose "Ignoring test $ignoretests"
1259             continue
1260         }
1261
1262         "--sr*" {                       # (--srcdir) where the testsuite source code lives
1263             # Already parsed, but parse again to make sure command line
1264             # options override any config file.
1265
1266             set srcdir $optarg
1267             continue
1268         }
1269
1270         "--str*" {                      # (--strace) expect trace level
1271             set tracelevel $optarg
1272             strace $tracelevel
1273             verbose "Source Trace level is now $tracelevel"
1274             continue
1275         }
1276
1277         "--sta*" {                      # (--status) exit status flag
1278             # preserved for compatability, do nothing
1279             continue
1280         }
1281
1282         "--tool_opt*" {
1283             continue
1284         }
1285
1286         "--tool_exec*" {
1287             set TOOL_EXECUTABLE $optarg
1288             continue
1289         }
1290
1291         "--to*" {                       # (--tool) specify tool name
1292             set tool $optarg
1293             verbose "Testing $tool"
1294             continue
1295         }
1296
1297         "--x*" {
1298             set xml 1
1299             verbose "XML logging turned on"
1300             continue
1301         }
1302
1303         "--he*" {                       # (--help) help text
1304             usage
1305             exit 0
1306         }
1307
1308         "[A-Z0-9_-.]*=*" { # skip makefile style args like CC=gcc, etc... (processed in first pass)
1309             continue
1310         }
1311
1312         default {
1313             if {[info exists tool]} {
1314                 if { [info procs ${tool}_option_proc] ne "" } {
1315                     if {[${tool}_option_proc $option]} {
1316                         continue
1317                     }
1318                 }
1319             }
1320             send_error "\nIllegal Argument \"$option\"\n"
1321             send_error "try \"runtest --help\" for option list\n"
1322             exit 1
1323         }
1324     }
1325 }
1326
1327 #
1328 # check for a few crucial variables
1329 #
1330 if {![info exists tool]} {
1331     send_error "WARNING: No tool specified\n"
1332     set tool ""
1333 }
1334
1335 #
1336 # initialize a few Tcl variables to something other than their default
1337 #
1338 if { $verbose > 2 || $log_dialog } {
1339     log_user 1
1340 } else {
1341     log_user 0
1342 }
1343
1344 set timeout 10
1345
1346
1347
1348 #
1349 # open log files
1350 #
1351 open_logs
1352
1353 # print the config info
1354 clone_output "Test run by $logname on [timestamp -format %c]"
1355 if {[is3way]} {
1356     clone_output "Target is $target_triplet"
1357     clone_output "Host   is $host_triplet"
1358     clone_output "Build  is $build_triplet"
1359 } else {
1360     if {[isnative]} {
1361         clone_output "Native configuration is $target_triplet"
1362     } else {
1363         clone_output "Target is $target_triplet"
1364         clone_output "Host   is $host_triplet"
1365     }
1366 }
1367
1368 clone_output "\n\t\t=== $tool tests ===\n"
1369
1370 #
1371 # Look for the generic board configuration file. It searches in several
1372 # places: $libdir/config, $libdir/../config, and $boards_dir.
1373 #
1374
1375 proc load_generic_config { name } {
1376     global libdir
1377     global board
1378     global board_info
1379     global boards_dir
1380     global board_type
1381
1382     if {[info exists board]} {
1383         if {![info exists board_info($board,generic_name)]} {
1384             set board_info($board,generic_name) $name
1385         }
1386     }
1387
1388     if {[info exists board_type]} {
1389         set type "for $board_type"
1390     } else {
1391         set type ""
1392     }
1393
1394     set dirlist [concat $libdir/config [file dirname $libdir]/config $boards_dir]
1395     set result [search_and_load_file "generic interface file $type" $name.exp $dirlist]
1396
1397     return $result
1398 }
1399
1400 #
1401 # Load the tool-specific target description.
1402 #
1403 proc load_config { args } {
1404     global testsuitedir
1405
1406     set found 0
1407
1408     return [search_and_load_file "tool-and-target-specific interface file" $args [list $testsuitedir/config $testsuitedir/../config $testsuitedir/../../config $testsuitedir/../../../config]]
1409 }
1410
1411 #
1412 # Find the files that set up the configuration for the target. There
1413 # are assumed to be two of them; one defines a basic set of
1414 # functionality for the target that can be used by all tool
1415 # testsuites, and the other defines any necessary tool-specific
1416 # functionality. These files are loaded via load_config.
1417 #
1418 # These used to all be named $target_abbrev-$tool.exp, but as the
1419 # $tool variable goes away, it's now just $target_abbrev.exp.  First
1420 # we look for a file named with both the abbrev and the tool names.
1421 # Then we look for one named with just the abbrev name. Finally, we
1422 # look for a file called default, which is the default actions, as
1423 # some tools could be purely host based. Unknown is mostly for error
1424 # trapping.
1425 #
1426
1427 proc load_tool_target_config { name } {
1428     global target_os libdir testsuitedir
1429
1430     set found [load_config $name.exp $target_os.exp "default.exp" "unknown.exp"]
1431
1432     if { $found == 0 } {
1433         send_error "WARNING: Couldn't find tool config file for $name, using default.\n"
1434         # If we can't load the tool init file, this must be a simple natively hosted
1435         # test suite, so we use the default procs for Unix.
1436         if { [search_and_load_file "library file" default.exp [list $libdir $libdir/config [file dirname [file dirname $testsuitedir]]/dejagnu/config $testsuitedir/config . [file dirname [file dirname [file dirname $testsuitedir]]]/dejagnu/config]] == 0 } {
1437             send_error "ERROR: Couldn't find default tool init file.\n"
1438             exit 1
1439         }
1440     }
1441 }
1442
1443 #
1444 # Find the file that describes the machine specified by board_name.
1445 #
1446
1447 proc load_board_description { board_name args } {
1448     global libdir
1449     global board
1450     global board_info
1451     global boards_dir
1452     global board_type
1453
1454     set dejagnu ""
1455
1456     if { [llength $args] > 0 } {
1457         set whole_name [lindex $args 0]
1458     } else {
1459         set whole_name $board_name
1460     }
1461
1462     set board_info($whole_name,name) $whole_name
1463     if {![info exists board]} {
1464         set board $whole_name
1465         set board_set 1
1466     } else {
1467         set board_set 0
1468     }
1469
1470     set dirlist {}
1471     if { [llength $args] > 1 } {
1472         set suffix [lindex $args 1]
1473         if { $suffix ne "" } {
1474             foreach x $boards_dir {
1475                 lappend dirlist $x/$suffix
1476             }
1477             lappend dirlist $libdir/baseboards/$suffix
1478         }
1479     }
1480     set dirlist [concat $dirlist $boards_dir]
1481     lappend dirlist $libdir/baseboards
1482     verbose "dirlist is $dirlist"
1483     if {[info exists board_type]} {
1484         set type "for $board_type"
1485     } else {
1486         set type ""
1487     }
1488     if {![info exists board_info($whole_name,isremote)]} {
1489         set board_info($whole_name,isremote) 1
1490         if {[info exists board_type]} {
1491             if { $board_type eq "build" } {
1492                 set board_info($whole_name,isremote) 0
1493             }
1494         }
1495         if { $board_name eq [get_local_hostname] } {
1496             set board_info($whole_name,isremote) 0
1497         }
1498     }
1499     search_and_load_file "standard board description file $type" standard.exp $dirlist
1500     set found [search_and_load_file "board description file $type" $board_name.exp $dirlist]
1501     if { $board_set != 0 } {
1502         unset board
1503     }
1504
1505     return $found
1506 }
1507
1508 #
1509 # Find the base-level file that describes the machine specified by args. We
1510 # only look in one directory, $libdir/baseboards.
1511 #
1512
1513 proc load_base_board_description { board_name } {
1514     global libdir
1515     global board
1516     global board_info
1517     global board_type
1518
1519     set board_set 0
1520     set board_info($board_name,name) $board_name
1521     if {![info exists board]} {
1522         set board $board_name
1523         set board_set 1
1524     }
1525     if {[info exists board_type]} {
1526         set type "for $board_type"
1527     } else {
1528         set type ""
1529     }
1530     if {![info exists board_info($board_name,isremote)]} {
1531         set board_info($board_name,isremote) 1
1532         if {[info exists board_type]} {
1533             if { $board_type eq "build" } {
1534                 set board_info($board_name,isremote) 0
1535             }
1536         }
1537     }
1538
1539     if { $board_name eq [get_local_hostname] } {
1540         set board_info($board_name,isremote) 0
1541     }
1542     set found [search_and_load_file "board description file $type" $board_name.exp [list $libdir/baseboards]]
1543     if { $board_set != 0 } {
1544         unset board
1545     }
1546
1547     return $found
1548 }
1549
1550 #
1551 # Source the testcase in TEST_FILE_NAME.
1552 #
1553
1554 proc runtest { test_file_name } {
1555     global prms_id
1556     global bug_id
1557     global test_result
1558     global errcnt
1559     global errorCode
1560     global errorInfo
1561     global tool
1562     global testdir
1563
1564     clone_output "Running $test_file_name ..."
1565     set prms_id 0
1566     set bug_id  0
1567     set test_result ""
1568
1569     # set testdir so testsuite file -test has a starting point
1570     set testdir [file dirname $test_file_name]
1571
1572     if {[file exists $test_file_name]} {
1573         set timestart [timestamp]
1574
1575         if {[info exists tool]} {
1576             if { [info procs ${tool}_init] ne "" } {
1577                 ${tool}_init $test_file_name
1578             }
1579         }
1580
1581         if { [catch "uplevel #0 source $test_file_name" msg] == 1 } {
1582             # If we have a Tcl error, propagate the exit status so
1583             # that 'make' (if it invokes runtest) notices the error.
1584             global exit_status exit_error
1585             # exit error is set by the --status command line option
1586             if { $exit_status == 0 } {
1587                 set exit_status 2
1588             }
1589             set new_error [list $test_file_name $msg]
1590             # We can't call `perror' here, it resets `errorInfo'
1591             # before we want to look at it.  Also remember that perror
1592             # increments `errcnt'.  If we do call perror we'd have to
1593             # reset errcnt afterwards.
1594             clone_output "ERROR: tcl error sourcing $test_file_name."
1595             if {[info exists errorCode]} {
1596                 clone_output "ERROR: tcl error code $errorCode"
1597                 lappend new_error $errorCode
1598             } else {
1599                 lappend new_error [list]
1600             }
1601             if {[info exists errorInfo]} {
1602                 clone_output "ERROR: $errorInfo"
1603                 lappend new_error $errorInfo
1604                 unset errorInfo
1605             } else {
1606                 lappend new_error [list]
1607             }
1608             lappend ::dejagnu::error::list $new_error
1609             unresolved "testcase '$test_file_name' aborted due to Tcl error"
1610         }
1611
1612         if {[info exists tool]} {
1613             if { [info procs ${tool}_finish] ne "" } {
1614                 ${tool}_finish
1615             }
1616         }
1617         set timeend [timestamp]
1618         set timediff [expr {$timeend - $timestart}]
1619         verbose -log "testcase $test_file_name completed in $timediff seconds" 4
1620     } else {
1621         # This should never happen, but maybe if the file got removed
1622         # between the `find' above and here.
1623         perror "$test_file_name does not exist." 0
1624     }
1625 }
1626
1627 # Trap some signals so we know what's happening.  These replace the previous
1628 # ones because we've now loaded the library stuff.
1629 #
1630 if {![exp_debug]} {
1631     foreach sig {{SIGINT {interrupted by user} 130} \
1632                      {SIGQUIT {interrupted by user} 131} \
1633                      {SIGTERM {terminated} 143}} {
1634         set signal [lindex $sig 0]
1635         set str [lindex $sig 1]
1636         set code [lindex $sig 2]
1637         trap "send_error \"got a \[trap -name\] signal, $str \\n\"; set exit_status $code; log_and_exit;" $signal
1638         verbose "setting trap for $signal to $str" 1
1639     }
1640     unset signal str sig
1641 }
1642
1643 #
1644 # Given a list of targets, process any iterative lists.
1645 #
1646 proc process_target_variants { target_list } {
1647     set result {}
1648     foreach x $target_list {
1649         if {[regexp "\\(" $x]} {
1650             regsub {^.*\(([^()]*)\)$} $x {\1} variant_list
1651             regsub {\([^(]*$} $x "" x
1652             set list [process_target_variants $x]
1653             set result {}
1654             foreach x $list {
1655                 set result [concat $result [iterate_target_variants $x [split $variant_list ","]]]
1656             }
1657         } elseif {[regexp "\{" $x]} {
1658             regsub "^.*\{(\[^\{\}\]*)\}$" $x {\1} variant_list
1659             regsub "\{\[^\{\]*$" $x "" x
1660             set list [process_target_variants $x]
1661             foreach x $list {
1662                 foreach i [split $variant_list ","] {
1663                     set name $x
1664                     if { $i ne "" } {
1665                         append name "/" $i
1666                     }
1667                     lappend result $name
1668                 }
1669             }
1670         } else {
1671             lappend result $x
1672         }
1673     }
1674     return $result
1675 }
1676
1677 proc iterate_target_variants { target variants } {
1678     return [iterate_target_variants_two $target $target $variants]
1679 }
1680
1681 #
1682 # Given a list of variants, produce the list of all possible combinations.
1683 #
1684 proc iterate_target_variants_two { orig_target target variants } {
1685
1686     if { [llength $variants] == 0 } {
1687         return [list $target]
1688     } else {
1689         if { [llength $variants] > 1 } {
1690             set result [iterate_target_variants_two $orig_target $target [lrange $variants 1 end]]
1691         } else {
1692             if { $target ne $orig_target } {
1693                 set result [list $target]
1694             } else {
1695                 set result {}
1696             }
1697         }
1698         if { [lindex $variants 0] ne "" } {
1699             append target "/" [lindex $variants 0]
1700             return [concat $result [iterate_target_variants_two $orig_target $target [lrange $variants 1 end]]]
1701         } else {
1702             return [concat $result $target]
1703         }
1704     }
1705 }
1706
1707 setup_build_hook [get_local_hostname]
1708
1709 if {[info exists host_board]} {
1710     setup_host_hook $host_board
1711 } else {
1712     set hb [get_local_hostname]
1713     if { $hb ne "" } {
1714         setup_host_hook $hb
1715     }
1716 }
1717
1718 #
1719 # main test execution loop
1720 #
1721
1722 if {[info exists errorInfo]} {
1723     unset errorInfo
1724 }
1725
1726
1727 # make sure we have only single path delimiters
1728 regsub -all {([^/])//*} $srcdir {\1/} srcdir
1729 regsub -all {([^/])//*} $objdir {\1/} objdir
1730 regsub -all {([^/])//*} $testsuitedir {\1/} testsuitedir
1731 regsub -all {([^/])//*} $testbuilddir {\1/} testbuilddir
1732
1733 if {![info exists target_list]} {
1734     # Make sure there is at least one target machine. It's probably a Unix box,
1735     # but that's just a guess.
1736     set target_list { "unix" }
1737 } else {
1738     verbose "target list is $target_list"
1739 }
1740
1741 #
1742 # Iterate through the list of targets.
1743 #
1744 global current_target
1745
1746 set target_list [process_target_variants $target_list]
1747
1748 set target_count [llength $target_list]
1749
1750 clone_output "Schedule of variations:"
1751 foreach current_target $target_list {
1752     clone_output "    $current_target"
1753 }
1754 clone_output ""
1755
1756
1757 foreach current_target $target_list {
1758     verbose "target is $current_target"
1759     set current_target_name $current_target
1760     set tlist [split $current_target /]
1761     set current_target [lindex $tlist 0]
1762     set board_variant_list [lrange $tlist 1 end]
1763
1764     # Set the counts for this target to 0.
1765     reset_vars
1766     clone_output "Running target $current_target_name"
1767
1768     setup_target_hook $current_target_name $current_target
1769
1770     # If multiple passes requested, set them up.  Otherwise prepare just one.
1771     # The format of `MULTIPASS' is a list of elements containing
1772     # "{ name var1=value1 ... }" where `name' is a generic name for the pass and
1773     # currently has no other meaning.
1774
1775     global env
1776
1777     if { [info exists MULTIPASS] } {
1778         set multipass $MULTIPASS
1779     }
1780     if { $multipass eq "" } {
1781         set multipass { "" }
1782     }
1783
1784     # If PASS is specified, we want to run only the tests specified.
1785     # Its value should be a number or a list of numbers that specify
1786     # the passes that we want to run.
1787     if {[info exists PASS]} {
1788         set pass $PASS
1789     } else {
1790         set pass ""
1791     }
1792
1793     if {$pass ne ""} {
1794         set passes [list]
1795         foreach p $pass {
1796             foreach multipass_elem $multipass {
1797                 set multipass_name [lindex $multipass_elem 0]
1798                 if {$p == $multipass_name} {
1799                     lappend passes $multipass_elem
1800                     break
1801                 }
1802             }
1803         }
1804         set multipass $passes
1805     }
1806
1807     foreach pass $multipass {
1808
1809         # multipass_name is set for `record_test' to use (see framework.exp).
1810         if { [lindex $pass 0] ne "" } {
1811             set multipass_name [lindex $pass 0]
1812             clone_output "Running pass `$multipass_name' ..."
1813         } else {
1814             set multipass_name ""
1815         }
1816         set restore ""
1817         foreach varval [lrange $pass 1 end] {
1818             set tmp [string first "=" $varval]
1819             set var [string range $varval 0 [expr {$tmp - 1}]]
1820             # Save previous value.
1821             if {[info exists $var]} {
1822                 lappend restore "$var [list [eval concat \$$var]]"
1823             } else {
1824                 lappend restore $var
1825             }
1826             # Handle "CFLAGS=$CFLAGS foo".
1827             eval set $var \[string range \"$varval\" [expr {$tmp + 1}] end\]
1828             verbose "$var is now [eval concat \$$var]"
1829             unset tmp var
1830         }
1831
1832         # look for the top level testsuites. if $tool doesn't
1833         # exist and there are no subdirectories in $testsuitedir, then
1834         # we print a warning and default to srcdir.
1835         set test_top_dirs [lsort [getdirs -all $testsuitedir $tool*]]
1836         if { $test_top_dirs eq "" } {
1837             send_error "WARNING: could not find testsuite; trying $srcdir.\n"
1838             set test_top_dirs [list $srcdir]
1839         } else {
1840             # JYG:
1841             # DejaGNU's notion of test tree and test files is very
1842             # general:
1843             # given $testsuitedir and $tool, any subdirectory (at any
1844             # level deep) with the "$tool" prefix starts a test tree
1845             # given a test tree, any *.exp file underneath (at any
1846             # level deep) is a test file.
1847             #
1848             # For test tree layouts with $tool prefix on
1849             # both a parent and a child directory, we need to eliminate
1850             # the child directory entry from test_top_dirs list.
1851             # e.g. gdb.hp/gdb.base-hp/ would result in two entries
1852             # in the list: gdb.hp, gdb.hp/gdb.base-hp.
1853             # If the latter not eliminated, test files under
1854             # gdb.hp/gdb.base-hp would be run twice (since test files
1855             # are gathered from all sub-directories underneath a
1856             # directory).
1857             #
1858             # Since $tool may be g++, etc. which could confuse
1859             # regexp, we cannot do the simpler test:
1860             #     ...
1861             #     if [regexp "$testsuitedir/.*$tool.*/.*$tool.*" $dir]
1862             #     ...
1863             # instead, we rely on the fact that test_top_dirs is
1864             # a sorted list of entries, and any entry that contains
1865             # the previous valid test top dir entry in its own pathname
1866             # must be excluded.
1867
1868             set temp_top_dirs [list]
1869             set prev_dir ""
1870             foreach dir $test_top_dirs {
1871                 if { $prev_dir eq ""
1872                      || [string first $prev_dir/ $dir] == -1 } {
1873                     # the first top dir entry, or an entry that
1874                     # does not share the previous entry's entire
1875                     # pathname, record it as a valid top dir entry.
1876                     #
1877                     lappend temp_top_dirs $dir
1878                     set prev_dir $dir
1879                 }
1880             }
1881             set test_top_dirs $temp_top_dirs
1882         }
1883         verbose "Top level testsuite dirs are $test_top_dirs" 2
1884         set testlist ""
1885         if {[array exists all_runtests]} {
1886             foreach x [array names all_runtests] {
1887                 verbose "trying to glob $testsuitedir/$x" 2
1888                 set s [glob -nocomplain $testsuitedir/$x]
1889                 if { $s ne "" } {
1890                     set testlist [concat $testlist $s]
1891                 }
1892             }
1893         }
1894         #
1895         # If we have a list of tests, run all of them.
1896         #
1897         if { $testlist ne "" } {
1898             foreach test_name $testlist {
1899                 if { $ignoretests ne "" } {
1900                     if { 0 <= [lsearch $ignoretests [file tail $test_name]]} {
1901                         continue
1902                     }
1903                 }
1904
1905                 # set subdir to the tail of the dirname after $srcdir,
1906                 # for the driver files that want it.  XXX this is silly.
1907                 # drivers should get a single var, not $srcdir/$subdir
1908                 set subdir [relative_filename $srcdir \
1909                                 [file dirname $test_name]]
1910
1911                 # XXX not the right thing to do.
1912                 set runtests [list [file tail $test_name] ""]
1913
1914                 runtest $test_name
1915             }
1916         } else {
1917             #
1918             # Go digging for tests.
1919             #
1920             foreach dir $test_top_dirs {
1921                 if { $dir ne $testsuitedir } {
1922                     # Ignore this directory if is a directory to be
1923                     # ignored.
1924                     if {[info exists ignoredirs] && $ignoredirs ne ""} {
1925                         set found 0
1926                         foreach directory $ignoredirs {
1927                             if {[string match *$directory* $dir]} {
1928                                 set found 1
1929                                 break
1930                             }
1931                         }
1932                         if { $found } {
1933                             continue
1934                         }
1935                     }
1936
1937                     # Run the test if dir_to_run was specified as a
1938                     # value (for example in MULTIPASS) and the test
1939                     # directory matches that directory.
1940                     if {[info exists dir_to_run] && $dir_to_run ne ""} {
1941                         # JYG: dir_to_run might be a space delimited list
1942                         # of directories.  Look for match on each item.
1943                         set found 0
1944                         foreach directory $dir_to_run {
1945                             if {[string match *$directory* $dir]} {
1946                                 set found 1
1947                                 break
1948                             }
1949                         }
1950                         if {!$found} {
1951                             continue
1952                         }
1953                     }
1954
1955                     # Run the test if cmdline_dir_to_run was specified
1956                     # by the user using --directory and the test
1957                     # directory matches that directory
1958                     if {[info exists cmdline_dir_to_run] \
1959                             && $cmdline_dir_to_run ne ""} {
1960                         # JYG: cmdline_dir_to_run might be a space delimited
1961                         # list of directories.  Look for match on each item.
1962                         set found 0
1963                         foreach directory $cmdline_dir_to_run {
1964                             # Look for a directory that ends with the
1965                             # provided --directory name.
1966                             if {[string match $directory $dir]
1967                                 || [string match "*/$directory" $dir]} {
1968                                 set found 1
1969                                 break
1970                             }
1971                         }
1972                         if {!$found} {
1973                             continue
1974                         }
1975                     }
1976
1977                     foreach test_name [lsort [find $dir *.exp]] {
1978                         if { $test_name eq "" } {
1979                             continue
1980                         }
1981                         # Ignore this one if asked to.
1982                         if { $ignoretests ne "" } {
1983                             if { 0 <= [lsearch $ignoretests [file tail $test_name]]} {
1984                                 continue
1985                             }
1986                         }
1987
1988                         # Get the path after the $srcdir so we know
1989                         # the subdir we're in.
1990                         set subdir [relative_filename $srcdir \
1991                                         [file dirname $test_name]]
1992                         # Check to see if the range of tests is limited,
1993                         # set `runtests' to a list of two elements: the script name
1994                         # and any arguments ("" if none).
1995                         if {[array exists all_runtests]} {
1996                             verbose "searching for $test_name in [array names all_runtests]" 2
1997                             if { 0 > [lsearch [array names all_runtests] [file tail $test_name]]} {
1998                                 if { 0 > [lsearch [array names all_runtests] $test_name] } {
1999                                     continue
2000                                 }
2001                             }
2002                             set runtests [list [file tail $test_name] $all_runtests([file tail $test_name])]
2003                         } else {
2004                             set runtests [list [file tail $test_name] ""]
2005                         }
2006                         runtest $test_name
2007                     }
2008                 }
2009             }
2010         }
2011
2012         # Restore the variables set by this pass.
2013         foreach varval $restore {
2014             if { [llength $varval] > 1 } {
2015                 verbose "Restoring [lindex $varval 0] to [lindex $varval 1]" 4
2016                 set [lindex $varval 0] [lindex $varval 1]
2017             } else {
2018                 verbose "Restoring [lindex $varval 0] to `unset'" 4
2019                 unset -- [lindex $varval 0]
2020             }
2021         }
2022     }
2023     cleanup_target_hook $current_target
2024     if { $target_count > 1 } {
2025         log_summary
2026     }
2027 }
2028
2029 log_and_exit