git-commit --allow-empty

[debian-git.git] / Documentation / git-commit.txt

git-commit(1)
=============

NAME
----
git-commit - Record changes to the repository

SYNOPSIS
--------
[verse]
'git-commit' [-a | --interactive] [-s] [-v] [-u]
           [(-c | -C) <commit> | -F <file> | -m <msg> | --amend]
           [--allow-empty] [--no-verify] [-e] [--author <author>]
           [--] [[-i | -o ]<file>...]

DESCRIPTION
-----------
Use 'git commit' to store the current contents of the index in a new
commit along with a log message describing the changes you have made.

The content to be added can be specified in several ways:

1. by using gitlink:git-add[1] to incrementally "add" changes to the
   index before using the 'commit' command (Note: even modified
   files must be "added");

2. by using gitlink:git-rm[1] to remove files from the working tree
   and the index, again before using the 'commit' command;

3. by listing files as arguments to the 'commit' command, in which
   case the commit will ignore changes staged in the index, and instead
   record the current content of the listed files;

4. by using the -a switch with the 'commit' command to automatically
   "add" changes from all known files (i.e. all files that are already
   listed in the index) and to automatically "rm" files in the index
   that have been removed from the working tree, and then perform the
   actual commit;

5. by using the --interactive switch with the 'commit' command to decide one
   by one which files should be part of the commit, before finalizing the
   operation.  Currently, this is done by invoking `git-add --interactive`.

The gitlink:git-status[1] command can be used to obtain a
summary of what is included by any of the above for the next
commit by giving the same set of parameters you would give to
this command.

If you make a commit and then found a mistake immediately after
that, you can recover from it with gitlink:git-reset[1].


OPTIONS
-------
-a|--all::
        Tell the command to automatically stage files that have
        been modified and deleted, but new files you have not
        told git about are not affected.

-c or -C <commit>::
        Take existing commit object, and reuse the log message
        and the authorship information (including the timestamp)
        when creating the commit.  With '-C', the editor is not
        invoked; with '-c' the user can further edit the commit
        message.

-F <file>::
        Take the commit message from the given file.  Use '-' to
        read the message from the standard input.

--author <author>::
        Override the author name used in the commit.  Use
        `A U Thor <author@example.com>` format.

-m <msg>|--message=<msg>::
        Use the given <msg> as the commit message.

-t <file>|--template=<file>::
        Use the contents of the given file as the initial version
        of the commit message. The editor is invoked and you can
        make subsequent changes. If a message is specified using
        the `-m` or `-F` options, this option has no effect. This
        overrides the `commit.template` configuration variable.

-s|--signoff::
        Add Signed-off-by line at the end of the commit message.

--no-verify::
        This option bypasses the pre-commit hook.
        See also link:hooks.html[hooks].

--allow-empty::
        Usually recording a commit that has the exact same tree as its
        sole parent commit and the command prevents you from making such
        a mistake.  This option bypasses the safety, and is primarily
        for use by foreign scm interface scripts.

-e|--edit::
        The message taken from file with `-F`, command line with
        `-m`, and from file with `-C` are usually used as the
        commit log message unmodified.  This option lets you
        further edit the message taken from these sources.

--amend::

        Used to amend the tip of the current branch. Prepare the tree
        object you would want to replace the latest commit as usual
        (this includes the usual -i/-o and explicit paths), and the
        commit log editor is seeded with the commit message from the
        tip of the current branch. The commit you create replaces the
        current tip -- if it was a merge, it will have the parents of
        the current tip as parents -- so the current top commit is
        discarded.
+
--
It is a rough equivalent for:
------
        $ git reset --soft HEAD^
        $ ... do something else to come up with the right tree ...
        $ git commit -c ORIG_HEAD

------
but can be used to amend a merge commit.
--

-i|--include::
        Before making a commit out of staged contents so far,
        stage the contents of paths given on the command line
        as well.  This is usually not what you want unless you
        are concluding a conflicted merge.

-u|--untracked-files::
        Show all untracked files, also those in uninteresting
        directories, in the "Untracked files:" section of commit
        message template.  Without this option only its name and
        a trailing slash are displayed for each untracked
        directory.

-v|--verbose::
        Show unified diff between the HEAD commit and what
        would be committed at the bottom of the commit message
        template.  Note that this diff output doesn't have its
        lines prefixed with '#'.

-q|--quiet::
        Suppress commit summary message.

\--::
        Do not interpret any more arguments as options.

<file>...::
        When files are given on the command line, the command
        commits the contents of the named files, without
        recording the changes already staged.  The contents of
        these files are also staged for the next commit on top
        of what have been staged before.


EXAMPLES
--------
When recording your own work, the contents of modified files in
your working tree are temporarily stored to a staging area
called the "index" with gitlink:git-add[1].  A file can be
reverted back, only in the index but not in the working tree,
to that of the last commit with `git-reset HEAD -- <file>`,
which effectively reverts `git-add` and prevents the changes to
this file from participating in the next commit.  After building
the state to be committed incrementally with these commands,
`git commit` (without any pathname parameter) is used to record what
has been staged so far.  This is the most basic form of the
command.  An example:

------------
$ edit hello.c
$ git rm goodbye.c
$ git add hello.c
$ git commit
------------

Instead of staging files after each individual change, you can
tell `git commit` to notice the changes to the files whose
contents are tracked in
your working tree and do corresponding `git add` and `git rm`
for you.  That is, this example does the same as the earlier
example if there is no other change in your working tree:

------------
$ edit hello.c
$ rm goodbye.c
$ git commit -a
------------

The command `git commit -a` first looks at your working tree,
notices that you have modified hello.c and removed goodbye.c,
and performs necessary `git add` and `git rm` for you.

After staging changes to many files, you can alter the order the
changes are recorded in, by giving pathnames to `git commit`.
When pathnames are given, the command makes a commit that
only records the changes made to the named paths:

------------
$ edit hello.c hello.h
$ git add hello.c hello.h
$ edit Makefile
$ git commit Makefile
------------

This makes a commit that records the modification to `Makefile`.
The changes staged for `hello.c` and `hello.h` are not included
in the resulting commit.  However, their changes are not lost --
they are still staged and merely held back.  After the above
sequence, if you do:

------------
$ git commit
------------

this second commit would record the changes to `hello.c` and
`hello.h` as expected.

After a merge (initiated by either gitlink:git-merge[1] or
gitlink:git-pull[1]) stops because of conflicts, cleanly merged
paths are already staged to be committed for you, and paths that
conflicted are left in unmerged state.  You would have to first
check which paths are conflicting with gitlink:git-status[1]
and after fixing them manually in your working tree, you would
stage the result as usual with gitlink:git-add[1]:

------------
$ git status | grep unmerged
unmerged: hello.c
$ edit hello.c
$ git add hello.c
------------

After resolving conflicts and staging the result, `git ls-files -u`
would stop mentioning the conflicted path.  When you are done,
run `git commit` to finally record the merge:

------------
$ git commit
------------

As with the case to record your own changes, you can use `-a`
option to save typing.  One difference is that during a merge
resolution, you cannot use `git commit` with pathnames to
alter the order the changes are committed, because the merge
should be recorded as a single commit.  In fact, the command
refuses to run when given pathnames (but see `-i` option).


DISCUSSION
----------

Though not required, it's a good idea to begin the commit message
with a single short (less than 50 character) line summarizing the
change, followed by a blank line and then a more thorough description.
Tools that turn commits into email, for example, use the first line
on the Subject: line and the rest of the commit in the body.

include::i18n.txt[]

ENVIRONMENT AND CONFIGURATION VARIABLES
---------------------------------------
The editor used to edit the commit log message will be chosen from the
GIT_EDITOR environment variable, the core.editor configuration variable, the
VISUAL environment variable, or the EDITOR environment variable (in that
order).

HOOKS
-----
This command can run `commit-msg`, `pre-commit`, and
`post-commit` hooks.  See link:hooks.html[hooks] for more
information.


SEE ALSO
--------
gitlink:git-add[1],
gitlink:git-rm[1],
gitlink:git-mv[1],
gitlink:git-merge[1],
gitlink:git-commit-tree[1]

Author
------
Written by Linus Torvalds <torvalds@osdl.org> and
Junio C Hamano <junkio@cox.net>


GIT
---
Part of the gitlink:git[7] suite