1 /* ac3200.c: A driver for the Ansel Communications EISA ethernet adaptor. */
3 Written 1993, 1994 by Donald Becker.
4 Copyright 1993 United States Government as represented by the Director,
5 National Security Agency. This software may only be used and distributed
6 according to the terms of the GNU Public License as modified by SRC,
7 incorporated herein by reference.
9 The author may be reached as becker@cesdis.gsfc.nasa.gov, or
10 C/O Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
12 This is driver for the Ansel Communications Model 3200 EISA Ethernet LAN
13 Adapter. The programming information is from the users manual, as related
14 by glee@ardnassak.math.clemson.edu.
18 Paul Gortmaker 05/98 : add support for shared mem above 1MB.
22 static const char *version
=
23 "ac3200.c:v1.01 7/1/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
25 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/sched.h>
29 #include <linux/errno.h>
30 #include <linux/string.h>
31 #include <linux/netdevice.h>
32 #include <linux/etherdevice.h>
33 #include <linux/init.h>
35 #include <asm/system.h>
41 /* Offsets from the base address. */
42 #define AC_NIC_BASE 0x00
43 #define AC_SA_PROM 0x16 /* The station address PROM. */
44 #define AC_ADDR0 0x00 /* Prefix station address values. */
47 #define AC_ID_PORT 0xC80
48 #define AC_EISA_ID 0x0110d305
49 #define AC_RESET_PORT 0xC84
51 #define AC_ENABLE 0x01
52 #define AC_CONFIG 0xC90 /* The configuration port. */
54 #define AC_IO_EXTENT 0x20
55 /* Actually accessed is:
63 /* Decoding of the configuration register. */
64 static unsigned char config2irqmap
[8] __initdata
= {15, 12, 11, 10, 9, 7, 5, 3};
65 static int addrmap
[8] =
66 {0xFF0000, 0xFE0000, 0xFD0000, 0xFFF0000, 0xFFE0000, 0xFFC0000, 0xD0000, 0 };
67 static const char *port_name
[4] = { "10baseT", "invalid", "AUI", "10base2"};
69 #define config2irq(configval) config2irqmap[((configval) >> 3) & 7]
70 #define config2mem(configval) addrmap[(configval) & 7]
71 #define config2name(configval) port_name[((configval) >> 6) & 3]
73 /* First and last 8390 pages. */
74 #define AC_START_PG 0x00 /* First page of 8390 TX buffer */
75 #define AC_STOP_PG 0x80 /* Last page +1 of the 8390 RX ring */
77 int ac3200_probe(struct net_device
*dev
);
78 static int ac_probe1(int ioaddr
, struct net_device
*dev
);
80 static int ac_open(struct net_device
*dev
);
81 static void ac_reset_8390(struct net_device
*dev
);
82 static void ac_block_input(struct net_device
*dev
, int count
,
83 struct sk_buff
*skb
, int ring_offset
);
84 static void ac_block_output(struct net_device
*dev
, const int count
,
85 const unsigned char *buf
, const int start_page
);
86 static void ac_get_8390_hdr(struct net_device
*dev
, struct e8390_pkt_hdr
*hdr
,
89 static int ac_close_card(struct net_device
*dev
);
92 /* Probe for the AC3200.
94 The AC3200 can be identified by either the EISA configuration registers,
95 or the unique value in the station address PROM.
98 int __init
ac3200_probe(struct net_device
*dev
)
100 unsigned short ioaddr
= dev
->base_addr
;
102 if (ioaddr
> 0x1ff) /* Check a single specified location. */
103 return ac_probe1(ioaddr
, dev
);
104 else if (ioaddr
> 0) /* Don't probe at all. */
110 for (ioaddr
= 0x1000; ioaddr
< 0x9000; ioaddr
+= 0x1000) {
111 if (check_region(ioaddr
, AC_IO_EXTENT
))
113 if (ac_probe1(ioaddr
, dev
) == 0)
120 static int __init
ac_probe1(int ioaddr
, struct net_device
*dev
)
124 if (inb_p(ioaddr
+ AC_ID_PORT
) == 0xff)
127 if (inl(ioaddr
+ AC_ID_PORT
) != AC_EISA_ID
)
131 #ifndef final_version
132 printk(KERN_DEBUG
"AC3200 ethercard configuration register is %#02x,"
133 " EISA ID %02x %02x %02x %02x.\n", inb(ioaddr
+ AC_CONFIG
),
134 inb(ioaddr
+ AC_ID_PORT
+ 0), inb(ioaddr
+ AC_ID_PORT
+ 1),
135 inb(ioaddr
+ AC_ID_PORT
+ 2), inb(ioaddr
+ AC_ID_PORT
+ 3));
138 /* We should have a "dev" from Space.c or the static module table. */
140 printk("ac3200.c: Passed a NULL device.\n");
141 dev
= init_etherdev(0, 0);
144 printk("AC3200 in EISA slot %d, node", ioaddr
/0x1000);
145 for(i
= 0; i
< 6; i
++)
146 printk(" %02x", dev
->dev_addr
[i
] = inb(ioaddr
+ AC_SA_PROM
+ i
));
149 /* Check the vendor ID/prefix. Redundant after checking the EISA ID */
150 if (inb(ioaddr
+ AC_SA_PROM
+ 0) != AC_ADDR0
151 || inb(ioaddr
+ AC_SA_PROM
+ 1) != AC_ADDR1
152 || inb(ioaddr
+ AC_SA_PROM
+ 2) != AC_ADDR2
) {
153 printk(", not found (invalid prefix).\n");
158 /* Allocate dev->priv and fill in 8390 specific dev fields. */
159 if (ethdev_init(dev
)) {
160 printk (", unable to allocate memory for dev->priv.\n");
164 /* Assign and allocate the interrupt now. */
166 dev
->irq
= config2irq(inb(ioaddr
+ AC_CONFIG
));
169 dev
->irq
= irq_cannonicalize(dev
->irq
);
170 printk(", assigning");
173 if (request_irq(dev
->irq
, ei_interrupt
, 0, "ac3200", dev
)) {
174 printk (" nothing! Unable to get IRQ %d.\n", dev
->irq
);
180 printk(" IRQ %d, %s port\n", dev
->irq
, port_name
[dev
->if_port
]);
182 request_region(ioaddr
, AC_IO_EXTENT
, "ac3200");
184 dev
->base_addr
= ioaddr
;
187 if (dev
->mem_start
) { /* Override the value from the board. */
188 for (i
= 0; i
< 7; i
++)
189 if (addrmap
[i
] == dev
->mem_start
)
193 outb((inb(ioaddr
+ AC_CONFIG
) & ~7) | i
, ioaddr
+ AC_CONFIG
);
197 dev
->if_port
= inb(ioaddr
+ AC_CONFIG
) >> 6;
198 dev
->mem_start
= config2mem(inb(ioaddr
+ AC_CONFIG
));
200 printk("%s: AC3200 at %#3x with %dkB memory at physical address %#lx.\n",
201 dev
->name
, ioaddr
, AC_STOP_PG
/4, dev
->mem_start
);
204 * BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
205 * the card mem within the region covered by `normal' RAM !!!
207 if (dev
->mem_start
> 1024*1024) { /* phys addr > 1MB */
208 if (dev
->mem_start
< virt_to_bus(high_memory
)) {
209 printk(KERN_CRIT
"ac3200.c: Card RAM overlaps with normal memory!!!\n");
210 printk(KERN_CRIT
"ac3200.c: Use EISA SCU to set card memory below 1MB,\n");
211 printk(KERN_CRIT
"ac3200.c: or to an address above 0x%lx.\n", virt_to_bus(high_memory
));
212 printk(KERN_CRIT
"ac3200.c: Driver NOT installed.\n");
213 free_irq(dev
->irq
, dev
);
218 dev
->mem_start
= (unsigned long)ioremap(dev
->mem_start
, AC_STOP_PG
*0x100);
219 if (dev
->mem_start
== 0) {
220 printk(KERN_ERR
"ac3200.c: Unable to remap card memory above 1MB !!\n");
221 printk(KERN_ERR
"ac3200.c: Try using EISA SCU to set memory below 1MB.\n");
222 printk(KERN_ERR
"ac3200.c: Driver NOT installed.\n");
223 free_irq(dev
->irq
, dev
);
228 ei_status
.reg0
= 1; /* Use as remap flag */
229 printk("ac3200.c: remapped %dkB card memory to virtual address %#lx\n",
230 AC_STOP_PG
/4, dev
->mem_start
);
233 dev
->rmem_start
= dev
->mem_start
+ TX_PAGES
*256;
234 dev
->mem_end
= dev
->rmem_end
= dev
->mem_start
235 + (AC_STOP_PG
- AC_START_PG
)*256;
237 ei_status
.name
= "AC3200";
238 ei_status
.tx_start_page
= AC_START_PG
;
239 ei_status
.rx_start_page
= AC_START_PG
+ TX_PAGES
;
240 ei_status
.stop_page
= AC_STOP_PG
;
241 ei_status
.word16
= 1;
246 ei_status
.reset_8390
= &ac_reset_8390
;
247 ei_status
.block_input
= &ac_block_input
;
248 ei_status
.block_output
= &ac_block_output
;
249 ei_status
.get_8390_hdr
= &ac_get_8390_hdr
;
251 dev
->open
= &ac_open
;
252 dev
->stop
= &ac_close_card
;
257 static int ac_open(struct net_device
*dev
)
260 /* Someday we may enable the IRQ and shared memory here. */
261 int ioaddr
= dev
->base_addr
;
263 if (request_irq(dev
->irq
, ei_interrupt
, 0, "ac3200", dev
))
274 static void ac_reset_8390(struct net_device
*dev
)
276 ushort ioaddr
= dev
->base_addr
;
278 outb(AC_RESET
, ioaddr
+ AC_RESET_PORT
);
279 if (ei_debug
> 1) printk("resetting AC3200, t=%ld...", jiffies
);
282 outb(AC_ENABLE
, ioaddr
+ AC_RESET_PORT
);
283 if (ei_debug
> 1) printk("reset done\n");
288 /* Grab the 8390 specific header. Similar to the block_input routine, but
289 we don't need to be concerned with ring wrap as the header will be at
290 the start of a page, so we optimize accordingly. */
293 ac_get_8390_hdr(struct net_device
*dev
, struct e8390_pkt_hdr
*hdr
, int ring_page
)
295 unsigned long hdr_start
= dev
->mem_start
+ ((ring_page
- AC_START_PG
)<<8);
296 isa_memcpy_fromio(hdr
, hdr_start
, sizeof(struct e8390_pkt_hdr
));
299 /* Block input and output are easy on shared memory ethercards, the only
300 complication is when the ring buffer wraps. */
302 static void ac_block_input(struct net_device
*dev
, int count
, struct sk_buff
*skb
,
305 unsigned long xfer_start
= dev
->mem_start
+ ring_offset
- (AC_START_PG
<<8);
307 if (xfer_start
+ count
> dev
->rmem_end
) {
308 /* We must wrap the input move. */
309 int semi_count
= dev
->rmem_end
- xfer_start
;
310 isa_memcpy_fromio(skb
->data
, xfer_start
, semi_count
);
312 isa_memcpy_fromio(skb
->data
+ semi_count
, dev
->rmem_start
, count
);
314 /* Packet is in one chunk -- we can copy + cksum. */
315 isa_eth_io_copy_and_sum(skb
, xfer_start
, count
, 0);
319 static void ac_block_output(struct net_device
*dev
, int count
,
320 const unsigned char *buf
, int start_page
)
322 unsigned long shmem
= dev
->mem_start
+ ((start_page
- AC_START_PG
)<<8);
324 isa_memcpy_toio(shmem
, buf
, count
);
327 static int ac_close_card(struct net_device
*dev
)
330 printk("%s: Shutting down ethercard.\n", dev
->name
);
333 /* We should someday disable shared memory and interrupts. */
334 outb(0x00, ioaddr
+ 6); /* Disable interrupts. */
335 free_irq(dev
->irq
, dev
);
346 #define MAX_AC32_CARDS 4 /* Max number of AC32 cards per module */
347 static struct net_device dev_ac32
[MAX_AC32_CARDS
] = {
356 static int io
[MAX_AC32_CARDS
] = { 0, };
357 static int irq
[MAX_AC32_CARDS
] = { 0, };
358 static int mem
[MAX_AC32_CARDS
] = { 0, };
359 MODULE_PARM(io
, "1-" __MODULE_STRING(MAX_AC32_CARDS
) "i");
360 MODULE_PARM(irq
, "1-" __MODULE_STRING(MAX_AC32_CARDS
) "i");
361 MODULE_PARM(mem
, "1-" __MODULE_STRING(MAX_AC32_CARDS
) "i");
366 int this_dev
, found
= 0;
368 if (load_8390_module("ac3200.c"))
371 for (this_dev
= 0; this_dev
< MAX_AC32_CARDS
; this_dev
++) {
372 struct net_device
*dev
= &dev_ac32
[this_dev
];
373 dev
->irq
= irq
[this_dev
];
374 dev
->base_addr
= io
[this_dev
];
375 dev
->mem_start
= mem
[this_dev
]; /* Currently ignored by driver */
376 dev
->init
= ac3200_probe
;
377 /* Default is to only install one card. */
378 if (io
[this_dev
] == 0 && this_dev
!= 0) break;
379 if (register_netdev(dev
) != 0) {
380 printk(KERN_WARNING
"ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io
[this_dev
]);
381 if (found
!= 0) { /* Got at least one. */
384 unload_8390_module();
397 for (this_dev
= 0; this_dev
< MAX_AC32_CARDS
; this_dev
++) {
398 struct net_device
*dev
= &dev_ac32
[this_dev
];
399 if (dev
->priv
!= NULL
) {
400 void *priv
= dev
->priv
;
401 /* Someday free_irq may be in ac_close_card() */
402 free_irq(dev
->irq
, dev
);
403 release_region(dev
->base_addr
, AC_IO_EXTENT
);
405 iounmap((void *)dev
->mem_start
);
406 unregister_netdev(dev
);
410 unload_8390_module();
416 * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c ac3200.c"
418 * kept-new-versions: 5