2 # Network device configuration
5 mainmenu_option next_comment
6 comment 'ARCnet devices'
8 tristate 'ARCnet support' CONFIG_ARCNET
9 if [ "$CONFIG_ARCNET" != "n" ]; then
10 bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH
11 bool ' Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051
12 dep_tristate ' ARCnet COM90xx (normal) chipset driver' CONFIG_ARCNET_COM90xx $CONFIG_ARCNET
13 dep_tristate ' ARCnet COM90xx (IO mapped) chipset driver' CONFIG_ARCNET_COM90xxIO $CONFIG_ARCNET
14 dep_tristate ' ARCnet COM90xx (RIM I) chipset driver' CONFIG_ARCNET_RIM_I $CONFIG_ARCNET
15 dep_tristate ' ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET
20 tristate 'Dummy net driver support' CONFIG_DUMMY
21 tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
22 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
23 if [ "$CONFIG_NETLINK" = "y" ]; then
24 tristate 'Ethertap network tap' CONFIG_ETHERTAP
31 mainmenu_option next_comment
32 comment 'Ethernet (10 or 100Mbit)'
34 bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
35 if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
36 if [ "$CONFIG_ARM" = "y" ]; then
37 if [ "$CONFIG_ARCH_ACORN" != "y" ]; then
38 tristate 'AM79C961A support' CONFIG_ARM_AM79C961A
40 source drivers/acorn/net/Config.in
43 if [ "$CONFIG_PPC" = "y" ]; then
44 tristate 'MACE (Power Mac ethernet) support' CONFIG_MACE
45 tristate 'BMAC (G3 ethernet) support' CONFIG_BMAC
47 if [ "$CONFIG_ZORRO" = "y" ]; then
48 tristate 'Ariadne support' CONFIG_ARIADNE
49 tristate 'Ariadne II support' CONFIG_ARIADNE2
50 tristate 'A2065 support' CONFIG_A2065
51 tristate 'Hydra support' CONFIG_HYDRA
53 if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then
54 tristate 'MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC
56 bool '3COM cards' CONFIG_NET_VENDOR_3COM
57 if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
58 tristate '3c501 support' CONFIG_EL1
59 tristate '3c503 support' CONFIG_EL2
60 tristate '3c505 support' CONFIG_ELPLUS
61 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
62 tristate '3c507 support' CONFIG_EL16
63 if [ "$CONFIG_MCA" = "y" ]; then
64 tristate '3c523 support' CONFIG_ELMC
65 tristate '3c527 support' CONFIG_ELMC_II
68 tristate '3c509/3c579 support' CONFIG_EL3
69 tristate '3c515 ISA Fast EtherLink' CONFIG_3C515
70 tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
72 tristate 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
73 bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
74 if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
75 tristate 'WD80*3 support' CONFIG_WD80x3
76 if [ "$CONFIG_MCA" = "y" ]; then
77 tristate 'SMC Ultra MCA support' CONFIG_ULTRAMCA
79 tristate 'SMC Ultra support' CONFIG_ULTRA
80 tristate 'SMC Ultra32 EISA support' CONFIG_ULTRA32
81 tristate 'SMC 9194 support' CONFIG_SMC9194
83 bool 'Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL
84 if [ "$CONFIG_NET_VENDOR_RACAL" = "y" ]; then
85 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
86 tristate 'NI5010 support' CONFIG_NI5010
88 tristate 'NI5210 support' CONFIG_NI52
89 tristate 'NI6510 support' CONFIG_NI65
91 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
92 tristate 'RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139
93 tristate 'Packet Engines Yellowfin Gigabit-NIC support' CONFIG_YELLOWFIN
95 bool 'Other ISA cards' CONFIG_NET_ISA
96 if [ "$CONFIG_NET_ISA" = "y" ]; then
97 tristate 'AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700
98 tristate 'Cabletron E21xx support' CONFIG_E2100
99 tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
100 tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3
101 tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
102 tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
103 tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X
104 tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
105 tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
106 tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
107 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
108 tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
110 tristate 'NE2000/NE1000 support' CONFIG_NE2000
111 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
112 tristate 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
114 bool 'SK_G16 support' CONFIG_SK_G16
116 if [ "$CONFIG_MCA" = "y" ]; then
117 tristate 'NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA
118 tristate 'SKnet MCA support' CONFIG_SKMC
120 bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
121 if [ "$CONFIG_NET_EISA" = "y" ]; then
122 tristate 'AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32
123 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
124 tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC
125 tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200
128 tristate 'Apricot Xen-II on board Ethernet' CONFIG_APRICOT
129 tristate 'CS89x0 support' CONFIG_CS89x0
130 tristate 'Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
131 tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP
132 tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
133 tristate 'EtherExpressPro/100 support' CONFIG_EEXPRESS_PRO100
134 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
135 tristate 'Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390
136 tristate 'Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210
138 tristate 'PCI NE2000 support' CONFIG_NE2K_PCI
139 tristate 'TI ThunderLAN support' CONFIG_TLAN
140 tristate 'VIA Rhine support' CONFIG_VIA_RHINE
141 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
142 tristate 'Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210
143 tristate 'SMC EtherPower II (EXPERIMENTAL)' CONFIG_EPIC100
144 bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET
147 bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
148 if [ "$CONFIG_NET_POCKET" = "y" ]; then
149 bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
150 tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
151 tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
157 bool 'FDDI driver support' CONFIG_FDDI
158 if [ "$CONFIG_FDDI" = "y" ]; then
159 bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX
162 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
163 bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI
164 if [ "$CONFIG_HIPPI" = "y" ]; then
165 tristate 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER
166 if [ "$CONFIG_ROADRUNNER" != "n" ]; then
167 bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS
176 if [ "$CONFIG_ATALK" != "n" ]; then
177 mainmenu_option next_comment
178 comment 'Appletalk devices'
179 dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK
180 dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK
181 if [ "$CONFIG_COPS" != "n" ]; then
182 bool 'Dayna firmware support' CONFIG_COPS_DAYNA
183 bool 'Tangent firmware support' CONFIG_COPS_TANGENT
185 dep_tristate 'Appletalk-IP driver support' CONFIG_IPDDP $CONFIG_ATALK
186 if [ "$CONFIG_IPDDP" != "n" ]; then
187 bool 'IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP
188 bool 'Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP
193 if [ ! "$CONFIG_PARPORT" = "n" ]; then
194 dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
197 tristate 'PPP (point-to-point) support' CONFIG_PPP
198 if [ ! "$CONFIG_PPP" = "n" ]; then
199 comment 'CCP compressors for PPP are only built as modules.'
202 tristate 'SLIP (serial line) support' CONFIG_SLIP
203 if [ "$CONFIG_SLIP" != "n" ]; then
204 bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
205 bool ' Keepalive and linefill' CONFIG_SLIP_SMART
206 bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
209 bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO
210 if [ "$CONFIG_NET_RADIO" = "y" ]; then
211 dep_tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET
212 tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
213 tristate 'Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN
217 mainmenu_option next_comment
218 comment 'Token ring devices'
220 bool 'Token Ring driver support' CONFIG_TR
221 if [ "$CONFIG_TR" = "y" ]; then
222 tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
223 # tristate 'IBM Lanstreamer PCI adaptor support' CONFIG_IBMLS
224 tristate 'IBM Olympic chipset PCI adapter support' CONFIG_IBMOL
225 tristate 'SysKonnect adapter support' CONFIG_SKTR
230 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
231 tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI
232 tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER
236 # WAN drivers support
239 mainmenu_option next_comment
240 comment 'Wan interfaces'
243 # There is no way to detect a comtrol sv11 - force it modular for now.
245 dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
247 # The COSA/SRP driver has not been tested as non-modular yet.
249 dep_tristate 'COSA/SRP sync serial boards support' CONFIG_COSA m
251 # There is no way to detect a Sealevel board. Force it modular
253 dep_tristate 'Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m
255 tristate 'Frame relay DLCI support' CONFIG_DLCI
256 if [ "$CONFIG_DLCI" != "n" ]; then
257 int ' Max open DLCI' CONFIG_DLCI_COUNT 24
258 int ' Max DLCI per device' CONFIG_DLCI_MAX 8
259 dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
266 if [ "$CONFIG_WAN_ROUTER" != "n" ]; then
267 bool 'WAN drivers' CONFIG_WAN_DRIVERS
268 if [ "$CONFIG_WAN_DRIVERS" = "y" ]; then
269 dep_tristate 'Sangoma WANPIPE(tm) multiprotocol cards' CONFIG_VENDOR_SANGOMA $CONFIG_WAN_DRIVERS
270 if [ "$CONFIG_VENDOR_SANGOMA" != "n" ]; then
271 int ' Maximum number of cards' CONFIG_WANPIPE_CARDS 1
272 bool ' WANPIPE X.25 support' CONFIG_WANPIPE_X25
273 bool ' WANPIPE Frame Relay support' CONFIG_WANPIPE_FR
274 bool ' WANPIPE PPP support' CONFIG_WANPIPE_PPP
276 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
277 dep_tristate 'Cyclom 2X(tm) multiprotocol cards (EXPERIMENTAL)' CONFIG_CYCLADES_SYNC $CONFIG_WAN_DRIVERS
278 if [ "$CONFIG_CYCLADES_SYNC" != "n" ]; then
279 bool ' Cyclom 2X X.25 support (EXPERIMENTAL)' CONFIG_CYCLOMX_X25
288 # X.25 network drivers
290 if [ "$CONFIG_X25" != "n" ]; then
291 if [ "$CONFIG_LAPB" != "n" ]; then
292 dep_tristate 'LAPB over Ethernet driver' CONFIG_LAPBETHER $CONFIG_LAPB
293 dep_tristate 'X.25 async driver' CONFIG_X25_ASY $CONFIG_LAPB