Import 2.4.0-test6pre2

[davej-history.git] / drivers / pcmcia / yenta.c

/*
 * Regular lowlevel cardbus driver ("yenta")
 *
 * (C) Copyright 1999, 2000 Linus Torvalds
 */
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/module.h>

#include <pcmcia/ss.h>

#include <asm/io.h>

#include "yenta.h"
#include "i82365.h"

#if 0
#define DEBUG(x,args...)        printk(__FUNCTION__ ": " x,##args)
#else
#define DEBUG(x,args...)
#endif

/* Don't ask.. */
#define to_cycles(ns)   ((ns)/120)
#define to_ns(cycles)   ((cycles)*120)

/*
 * Generate easy-to-use ways of reading a cardbus sockets
 * regular memory space ("cb_xxx"), configuration space
 * ("config_xxx") and compatibility space ("exca_xxxx")
 */
static inline u32 cb_readl(pci_socket_t *socket, unsigned reg)
{
        u32 val = readl(socket->base + reg);
        DEBUG("%p %04x %08x\n", socket, reg, val);
        return val;
}

static inline void cb_writel(pci_socket_t *socket, unsigned reg, u32 val)
{
        DEBUG("%p %04x %08x\n", socket, reg, val);
        writel(val, socket->base + reg);
}

static inline u8 config_readb(pci_socket_t *socket, unsigned offset)
{
        u8 val;
        pci_read_config_byte(socket->dev, offset, &val);
        DEBUG("%p %04x %02x\n", socket, offset, val);
        return val;
}

static inline u16 config_readw(pci_socket_t *socket, unsigned offset)
{
        u16 val;
        pci_read_config_word(socket->dev, offset, &val);
        DEBUG("%p %04x %04x\n", socket, offset, val);
        return val;
}

static inline u32 config_readl(pci_socket_t *socket, unsigned offset)
{
        u32 val;
        pci_read_config_dword(socket->dev, offset, &val);
        DEBUG("%p %04x %08x\n", socket, offset, val);
        return val;
}

static inline void config_writeb(pci_socket_t *socket, unsigned offset, u8 val)
{
        DEBUG("%p %04x %02x\n", socket, offset, val);
        pci_write_config_byte(socket->dev, offset, val);
}

static inline void config_writew(pci_socket_t *socket, unsigned offset, u16 val)
{
        DEBUG("%p %04x %04x\n", socket, offset, val);
        pci_write_config_word(socket->dev, offset, val);
}

static inline void config_writel(pci_socket_t *socket, unsigned offset, u32 val)
{
        DEBUG("%p %04x %08x\n", socket, offset, val);
        pci_write_config_dword(socket->dev, offset, val);
}

static inline u8 exca_readb(pci_socket_t *socket, unsigned reg)
{
        u8 val = readb(socket->base + 0x800 + reg);
        DEBUG("%p %04x %02x\n", socket, reg, val);
        return val;
}

static inline u8 exca_readw(pci_socket_t *socket, unsigned reg)
{
        u16 val;
        val = readb(socket->base + 0x800 + reg);
        val |= readb(socket->base + 0x800 + reg + 1) << 8;
        DEBUG("%p %04x %04x\n", socket, reg, val);
        return val;
}

static inline void exca_writeb(pci_socket_t *socket, unsigned reg, u8 val)
{
        DEBUG("%p %04x %02x\n", socket, reg, val);
        writeb(val, socket->base + 0x800 + reg);
}

static void exca_writew(pci_socket_t *socket, unsigned reg, u16 val)
{
        DEBUG("%p %04x %04x\n", socket, reg, val);
        writeb(val, socket->base + 0x800 + reg);
        writeb(val >> 8, socket->base + 0x800 + reg + 1);
}

/*
 * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
 * on what kind of card is inserted..
 */
static int yenta_get_status(pci_socket_t *socket, unsigned int *value)
{
        unsigned int val;
        u32 state = cb_readl(socket, CB_SOCKET_STATE);

        val  = (state & CB_3VCARD) ? SS_3VCARD : 0;
        val |= (state & CB_XVCARD) ? SS_XVCARD : 0;
        val |= (state & (CB_CDETECT1 | CB_CDETECT2 | CB_5VCARD | CB_3VCARD
                         | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;

        if (state & CB_CBCARD) {
                val |= SS_CARDBUS;      
                val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
                val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
                val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
        } else {
                u8 status = exca_readb(socket, I365_STATUS);
                val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
                if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
                        val |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
                } else {
                        val |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
                        val |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
                }
                val |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
                val |= (status & I365_CS_READY) ? SS_READY : 0;
                val |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
        }

        *value = val;
        return 0;
}

static int yenta_Vcc_power(u32 control)
{
        switch (control & CB_SC_VCC_MASK) {
        case CB_SC_VCC_5V: return 50;
        case CB_SC_VCC_3V: return 33;
        default: return 0;
        }
}

static int yenta_Vpp_power(u32 control)
{
        switch (control & CB_SC_VPP_MASK) {
        case CB_SC_VPP_12V: return 120;
        case CB_SC_VPP_5V: return 50;
        case CB_SC_VPP_3V: return 33;
        default: return 0;
        }
}

static int yenta_get_socket(pci_socket_t *socket, socket_state_t *state)
{
        u8 reg;
        u32 control;

        control = cb_readl(socket, CB_SOCKET_CONTROL);

        state->Vcc = yenta_Vcc_power(control);
        state->Vpp = yenta_Vpp_power(control);
        state->io_irq = socket->io_irq;

        if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) {
                u16 bridge = config_readw(socket, CB_BRIDGE_CONTROL);
                if (bridge & CB_BRIDGE_CRST)
                        state->flags |= SS_RESET;
                return 0;
        }

        /* 16-bit card state.. */
        reg = exca_readb(socket, I365_POWER);
        state->flags = (reg & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
        state->flags |= (reg & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;

        reg = exca_readb(socket, I365_INTCTL);
        state->flags |= (reg & I365_PC_RESET) ? 0 : SS_RESET;
        state->flags |= (reg & I365_PC_IOCARD) ? SS_IOCARD : 0;

        reg = exca_readb(socket, I365_CSCINT);
        state->csc_mask = (reg & I365_CSC_DETECT) ? SS_DETECT : 0;
        if (state->flags & SS_IOCARD) {
                state->csc_mask |= (reg & I365_CSC_STSCHG) ? SS_STSCHG : 0;
        } else {
                state->csc_mask |= (reg & I365_CSC_BVD1) ? SS_BATDEAD : 0;
                state->csc_mask |= (reg & I365_CSC_BVD2) ? SS_BATWARN : 0;
                state->csc_mask |= (reg & I365_CSC_READY) ? SS_READY : 0;
        }

        return 0;
}

static void yenta_set_power(pci_socket_t *socket, socket_state_t *state)
{
        u32 reg = 0;    /* CB_SC_STPCLK? */
        switch (state->Vcc) {
        case 33: reg = CB_SC_VCC_3V; break;
        case 50: reg = CB_SC_VCC_5V; break;
        default: reg = 0; break;
        }
        switch (state->Vpp) {
        case 33:  reg |= CB_SC_VPP_3V; break;
        case 50:  reg |= CB_SC_VPP_5V; break;
        case 120: reg |= CB_SC_VPP_12V; break;
        }
        if (reg != cb_readl(socket, CB_SOCKET_CONTROL))
                cb_writel(socket, CB_SOCKET_CONTROL, reg);
}

static int yenta_set_socket(pci_socket_t *socket, socket_state_t *state)
{
        u16 bridge;

        yenta_set_power(socket, state);
        socket->io_irq = state->io_irq;
        bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~(CB_BRIDGE_CRST | CB_BRIDGE_INTR);
        if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) {
                u8 intr;
                bridge |= (state->flags & SS_RESET) ? CB_BRIDGE_CRST : 0;

                /* ISA interrupt control? */
                intr = exca_readb(socket, I365_INTCTL);
                intr = (intr & ~0xf);
                if (!socket->cb_irq) {
                        intr |= state->io_irq;
                        bridge |= CB_BRIDGE_INTR;
                }
                exca_writeb(socket, I365_INTCTL, intr);
        }  else {
                u8 reg;

                bridge |= CB_BRIDGE_INTR;
                reg = exca_readb(socket, I365_INTCTL) & (I365_RING_ENA | I365_INTR_ENA);
                reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
                reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
                reg |= state->io_irq;
                exca_writeb(socket, I365_INTCTL, reg);

                reg = exca_readb(socket, I365_POWER) & (I365_VCC_MASK|I365_VPP1_MASK);
                reg |= I365_PWR_NORESET;
                if (state->flags & SS_PWR_AUTO) reg |= I365_PWR_AUTO;
                if (state->flags & SS_OUTPUT_ENA) reg |= I365_PWR_OUT;
                if (exca_readb(socket, I365_POWER) != reg)
                        exca_writeb(socket, I365_POWER, reg);

                /* CSC interrupt: no ISA irq for CSC */
                reg = I365_CSC_DETECT;
                if (state->flags & SS_IOCARD) {
                        if (state->csc_mask & SS_STSCHG) reg |= I365_CSC_STSCHG;
                } else {
                        if (state->csc_mask & SS_BATDEAD) reg |= I365_CSC_BVD1;
                        if (state->csc_mask & SS_BATWARN) reg |= I365_CSC_BVD2;
                        if (state->csc_mask & SS_READY) reg |= I365_CSC_READY;
                }
                exca_writeb(socket, I365_CSCINT, reg);
                exca_readb(socket, I365_CSC);
        }
        config_writew(socket, CB_BRIDGE_CONTROL, bridge);
        /* Socket event mask: get card insert/remove events.. */
        cb_writel(socket, CB_SOCKET_EVENT, -1);
        cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK);
        return 0;
}

static int yenta_get_io_map(pci_socket_t *socket, struct pccard_io_map *io)
{
        int map;
        unsigned char ioctl, addr;

        map = io->map;
        if (map > 1)
                return -EINVAL;

        io->start = exca_readw(socket, I365_IO(map)+I365_W_START);
        io->stop = exca_readw(socket, I365_IO(map)+I365_W_STOP);

        ioctl = exca_readb(socket, I365_IOCTL);
        addr = exca_readb(socket, I365_ADDRWIN);
        io->speed = to_ns(ioctl & I365_IOCTL_WAIT(map)) ? 1 : 0;
        io->flags  = (addr & I365_ENA_IO(map)) ? MAP_ACTIVE : 0;
        io->flags |= (ioctl & I365_IOCTL_0WS(map)) ? MAP_0WS : 0;
        io->flags |= (ioctl & I365_IOCTL_16BIT(map)) ? MAP_16BIT : 0;
        io->flags |= (ioctl & I365_IOCTL_IOCS16(map)) ? MAP_AUTOSZ : 0;

        return 0;
}

static int yenta_set_io_map(pci_socket_t *socket, struct pccard_io_map *io)
{
        int map;
        unsigned char ioctl, addr, enable;

        map = io->map;

        if (map > 1)
                return -EINVAL;

        enable = I365_ENA_IO(map);
        addr = exca_readb(socket, I365_ADDRWIN);

        /* Disable the window before changing it.. */
        if (addr & enable) {
                addr &= ~enable;
                exca_writeb(socket, I365_ADDRWIN, addr);
        }

        exca_writew(socket, I365_IO(map)+I365_W_START, io->start);
        exca_writew(socket, I365_IO(map)+I365_W_STOP, io->stop);

        ioctl = exca_readb(socket, I365_IOCTL) & ~I365_IOCTL_MASK(map);
        if (io->flags & MAP_0WS) ioctl |= I365_IOCTL_0WS(map);
        if (io->flags & MAP_16BIT) ioctl |= I365_IOCTL_16BIT(map);
        if (io->flags & MAP_AUTOSZ) ioctl |= I365_IOCTL_IOCS16(map);
        exca_writeb(socket, I365_IOCTL, ioctl);

        if (io->flags & MAP_ACTIVE)
                exca_writeb(socket, I365_ADDRWIN, addr | enable);
        return 0;
}

static int yenta_get_mem_map(pci_socket_t *socket, struct pccard_mem_map *mem)
{
        int map;
        unsigned char addr;
        unsigned int start, stop, page, offset;

        map = mem->map;
        if (map > 4)
                return -EINVAL;

        addr = exca_readb(socket, I365_ADDRWIN);
        mem->flags = (addr & I365_ENA_MEM(map)) ? MAP_ACTIVE : 0;

        start = exca_readw(socket, I365_MEM(map) + I365_W_START);
        mem->flags |= (start & I365_MEM_16BIT) ? MAP_16BIT : 0;
        mem->flags |= (start & I365_MEM_0WS) ? MAP_0WS : 0;
        start = (start & 0x0fff) << 12;

        stop = exca_readw(socket, I365_MEM(map) + I365_W_STOP);
        mem->speed = to_ns(stop >> 14);
        stop = ((stop & 0x0fff) << 12) + 0x0fff;

        offset = exca_readw(socket, I365_MEM(map) + I365_W_OFF);
        mem->flags |= (offset & I365_MEM_WRPROT) ? MAP_WRPROT : 0;
        mem->flags |= (offset & I365_MEM_REG) ? MAP_ATTRIB : 0;
        offset = ((offset & 0x3fff) << 12) + start;
        mem->card_start = offset & 0x3ffffff;

        page = exca_readb(socket, CB_MEM_PAGE(map)) << 24;
        mem->sys_start = start + page;
        mem->sys_stop = start + page;

        return 0;
}

static int yenta_set_mem_map(pci_socket_t *socket, struct pccard_mem_map *mem)
{
        int map;
        unsigned char addr, enable;
        unsigned int start, stop, card_start;
        unsigned short word;

        map = mem->map;
        start = mem->sys_start;
        stop = mem->sys_stop;
        card_start = mem->card_start;

        if (map > 4 || start > stop || ((start ^ stop) >> 24) ||
            (card_start >> 26) || mem->speed > 1000)
                return -EINVAL;

        enable = I365_ENA_MEM(map);
        addr = exca_readb(socket, I365_ADDRWIN);
        if (addr & enable) {
                addr &= ~enable;
                exca_writeb(socket, I365_ADDRWIN, addr);
        }

        exca_writeb(socket, CB_MEM_PAGE(map), start >> 24);

        word = (start >> 12) & 0x0fff;
        if (mem->flags & MAP_16BIT)
                word |= I365_MEM_16BIT;
        if (mem->flags & MAP_0WS)
                word |= I365_MEM_0WS;
        exca_writew(socket, I365_MEM(map) + I365_W_START, word);

        word = (stop >> 12) & 0x0fff;
        switch (to_cycles(mem->speed)) {
                case 0: break;
                case 1:  word |= I365_MEM_WS0; break;
                case 2:  word |= I365_MEM_WS1; break;
                default: word |= I365_MEM_WS1 | I365_MEM_WS0; break;
        }
        exca_writew(socket, I365_MEM(map) + I365_W_STOP, word);

        word = ((card_start - start) >> 12) & 0x3fff;
        if (mem->flags & MAP_WRPROT)
                word |= I365_MEM_WRPROT;
        if (mem->flags & MAP_ATTRIB)
                word |= I365_MEM_REG;
        exca_writew(socket, I365_MEM(map) + I365_W_OFF, word);

        if (mem->flags & MAP_ACTIVE)
                exca_writeb(socket, I365_ADDRWIN, addr | enable);
        return 0;
}

static void yenta_proc_setup(pci_socket_t *socket, struct proc_dir_entry *base)
{
        /* Not done yet */
}

static unsigned int yenta_events(pci_socket_t *socket)
{
        u8 csc;
        u32 cb_event;
        unsigned int events;
        
        /* Clear interrupt status for the event */
        cb_event = cb_readl(socket, CB_SOCKET_EVENT);
        cb_writel(socket, CB_SOCKET_EVENT, cb_event);

        csc = exca_readb(socket, I365_CSC);

        events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ;
        events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0;
        if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
                events |= (csc & I365_CSC_STSCHG) ? SS_STSCHG : 0;
        } else {
                events |= (csc & I365_CSC_BVD1) ? SS_BATDEAD : 0;
                events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0;
                events |= (csc & I365_CSC_READY) ? SS_READY : 0;
        }
        return events;
}

static void yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
        unsigned int events;
        pci_socket_t *socket = (pci_socket_t *) dev_id;

        events = yenta_events(socket);
        if (events) {
                socket->events |= events;
                wake_up_interruptible(&socket->wait);
        }
}

/*
 * Only probe "regular" interrupts, don't
 * touch dangerous spots like the mouse irq,
 * because there are mice that apparently
 * get really confused if they get fondled
 * too intimately.
 *
 * Default to 11, 10, 9, 7, 6, 5, 4, 3.
 */
static u32 isa_interrupts = 0x0ef8;

static unsigned int yenta_probe_irq(pci_socket_t *socket, u32 isa_irq_mask)
{
        int i;
        unsigned long val;
        u16 bridge_ctrl;
        u32 mask;

        /* Set up ISA irq routing to probe the ISA irqs.. */
        bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
        if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
                bridge_ctrl |= CB_BRIDGE_INTR;
                config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
        }

        /*
         * Probe for usable interrupts using the force
         * register to generate bogus card status events.
         */
        cb_writel(socket, CB_SOCKET_EVENT, -1);
        cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
        exca_writeb(socket, I365_CSCINT, 0);
        val = probe_irq_on() & isa_irq_mask;
        for (i = 1; i < 16; i++) {
                if (!((val >> i) & 1))
                        continue;
                exca_writeb(socket, I365_CSCINT, I365_CSC_STSCHG | (i << 4));
                cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
                udelay(100);
                cb_writel(socket, CB_SOCKET_EVENT, -1);
        }
        cb_writel(socket, CB_SOCKET_MASK, 0);
        exca_writeb(socket, I365_CSCINT, 0);
        
        mask = probe_irq_mask(val) & 0xffff;

        bridge_ctrl &= ~CB_BRIDGE_INTR;
        config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);

        return mask;
}

/*
 * Set static data that doesn't need re-initializing..
 */
static void yenta_get_socket_capabilities(pci_socket_t *socket, u32 isa_irq_mask)
{
        socket->cap.features |= SS_CAP_PAGE_REGS | SS_CAP_PCCARD | SS_CAP_CARDBUS;
        socket->cap.map_size = 0x1000;
        socket->cap.pci_irq = socket->cb_irq;
        socket->cap.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
        socket->cap.cb_dev = socket->dev;
        socket->cap.bus = NULL;

        printk("Yenta IRQ list %04x, PCI irq%d\n", socket->cap.irq_mask, socket->cb_irq);
}

extern void cardbus_register(pci_socket_t *socket);

/*
 * Watch a socket every second (and possibly in a
 * more timely manner if the state change interrupt
 * works..)
 */
static int yenta_socket_thread(void * data)
{
        pci_socket_t * socket = (pci_socket_t *) data;
        DECLARE_WAITQUEUE(wait, current);

        MOD_INC_USE_COUNT;
        daemonize();
        strcpy(current->comm, "CardBus Watcher");

        /* Figure out what the dang thing can do for the PCMCIA layer... */
        yenta_get_socket_capabilities(socket, isa_interrupts);
        printk("Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));

        /* Register it with the pcmcia layer.. */
        cardbus_register(socket);

        do {
                unsigned int events = socket->events | yenta_events(socket);

                if (events) {
                        socket->events = 0;
                        if (socket->handler)
                                socket->handler(socket->info, events);
                }

                current->state = TASK_INTERRUPTIBLE;
                add_wait_queue(&socket->wait, &wait);
                if (!socket->events)
                        schedule_timeout(HZ);
                remove_wait_queue(&socket->wait, &wait);
        } while (!signal_pending(current));
        MOD_DEC_USE_COUNT;
        return 0;
}

static void yenta_clear_maps(pci_socket_t *socket)
{
        int i;
        pccard_io_map io = { 0, 0, 0, 0, 1 };
        pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };

        mem.sys_stop = 0x0fff;
        yenta_set_socket(socket, &dead_socket);
        for (i = 0; i < 2; i++) {
                io.map = i;
                yenta_set_io_map(socket, &io);
        }
        for (i = 0; i < 5; i++) {
                mem.map = i;
                yenta_set_mem_map(socket, &mem);
        }
}

/*
 * Initialize the standard cardbus registers
 */
static void yenta_config_init(pci_socket_t *socket)
{
        u16 bridge;
        struct pci_dev *dev = socket->dev;

        pci_set_power_state(socket->dev, 0);

        config_writel(socket, CB_LEGACY_MODE_BASE, 0);
        config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
        config_writew(socket, PCI_COMMAND,
                        PCI_COMMAND_IO |
                        PCI_COMMAND_MEMORY |
                        PCI_COMMAND_MASTER |
                        PCI_COMMAND_WAIT);

        /* MAGIC NUMBERS! Fixme */
        config_writeb(socket, PCI_CACHE_LINE_SIZE, 32);
        config_writeb(socket, PCI_LATENCY_TIMER, 168);
        config_writeb(socket, PCI_SEC_LATENCY_TIMER, 176);
        config_writeb(socket, PCI_PRIMARY_BUS, dev->bus->number);
        config_writeb(socket, PCI_SECONDARY_BUS, dev->subordinate->number);
        config_writeb(socket, PCI_SUBORDINATE_BUS, dev->subordinate->number);

        /*
         * Set up the bridging state:
         *  - enable write posting.
         *  - memory window 0 prefetchable, window 1 non-prefetchable
         *  - PCI interrupts enabled if a PCI interrupt exists..
         */
        bridge = config_readw(socket, CB_BRIDGE_CONTROL);
        bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
        bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
        if (!socket->cb_irq)
                bridge |= CB_BRIDGE_INTR;
        config_writew(socket, CB_BRIDGE_CONTROL, bridge);

        exca_writeb(socket, I365_GBLCTL, 0x00);
        exca_writeb(socket, I365_GENCTL, 0x00);

        /* Redo card voltage interrogation */
        cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
}

/* Called at resume and initialization events */
static int yenta_init(pci_socket_t *socket)
{
        yenta_config_init(socket);
        yenta_clear_maps(socket);
        return 0;
}

static int yenta_suspend(pci_socket_t *socket)
{
        yenta_set_socket(socket, &dead_socket);

        /*
         * This does not work currently. The controller
         * loses too much informationduring D3 to come up
         * cleanly. We should probably fix yenta_init()
         * to update all the critical registers, notably
         * the IO and MEM bridging region data.. That is
         * something that pci_set_power_state() should
         * probably know about bridges anyway.
         *
        pci_set_power_state(socket->dev, 3);
         */

        return 0;
}

static void yenta_allocate_res(pci_socket_t *socket, int nr, unsigned type)
{
        struct pci_bus *bus;
        struct resource *root, *res;
        u32 start, end;
        u32 align, size, min, max;
        unsigned offset;

        offset = 0x1c + 8*nr;
        bus = socket->dev->subordinate;
        res = socket->dev->resource + PCI_BRIDGE_RESOURCES + nr;
        res->name = bus->name;
        res->flags = type;
        res->start = 0;
        res->end = 0;
        root = pci_find_parent_resource(socket->dev, res);

        if (!root)
                return;

        start = config_readl(socket, offset);
        end = config_readl(socket, offset+4) | 0xfff;
        if (start && end > start) {
                res->start = start;
                res->end = end;
                request_resource(root, res);
                return;
        }

        align = size = 4*1024*1024;
        min = PCIBIOS_MIN_MEM; max = ~0U;
        if (type & IORESOURCE_IO) {
                align = 1024;
                size = 256;
                min = PCIBIOS_MIN_IO;
                max = 0xffff;
        }
                
        if (allocate_resource(root, res, size, min, max, align, NULL, NULL) < 0)
                return;

        config_writel(socket, offset, res->start);
        config_writel(socket, offset+4, res->end);
}

/*
 * Allocate the bridge mappings for the device..
 */
static void yenta_allocate_resources(pci_socket_t *socket)
{
        yenta_allocate_res(socket, 0, IORESOURCE_MEM|IORESOURCE_PREFETCH);
        yenta_allocate_res(socket, 1, IORESOURCE_MEM);
        yenta_allocate_res(socket, 2, IORESOURCE_IO);
        yenta_allocate_res(socket, 3, IORESOURCE_IO);   /* PCI isn't clever enough to use this one yet */
}

/*
 * Close it down - release our resources and go home..
 */
static void yenta_close(pci_socket_t *sock)
{
        if (sock->cb_irq)
                free_irq(sock->cb_irq, sock);
        if (sock->base)
                iounmap(sock->base);
}

#include "ti113x.h"
#include "ricoh.h"

/*
 * Different cardbus controllers have slightly different
 * initialization sequences etc details. List them here..
 */
#define PD(x,y) PCI_VENDOR_ID_##x, PCI_DEVICE_ID_##x##_##y
static struct cardbus_override_struct {
        unsigned short vendor;
        unsigned short device;
        struct pci_socket_ops *op;
} cardbus_override[] = {
        { PD(TI,1130),  &ti113x_ops },
        { PD(TI,1031),  &ti_ops },
        { PD(TI,1131),  &ti113x_ops },
        { PD(TI,1250),  &ti1250_ops },
        { PD(TI,1220),  &ti_ops },
        { PD(TI,1221),  &ti_ops },
        { PD(TI,1210),  &ti_ops },
        { PD(TI,1450),  &ti_ops },
        { PD(TI,1225),  &ti_ops },
        { PD(TI,1251A), &ti_ops },
        { PD(TI,1211),  &ti_ops },
        { PD(TI,1251B), &ti_ops },
        { PD(TI,1420),  &ti_ops },

        { PD(RICOH,RL5C465), &ricoh_ops },
        { PD(RICOH,RL5C466), &ricoh_ops },
        { PD(RICOH,RL5C475), &ricoh_ops },
        { PD(RICOH,RL5C476), &ricoh_ops },
        { PD(RICOH,RL5C478), &ricoh_ops }
};

#define NR_OVERRIDES (sizeof(cardbus_override)/sizeof(struct cardbus_override_struct))

/*
 * Initialize a cardbus controller. Make sure we have a usable
 * interrupt, and that we can map the cardbus area. Fill in the
 * socket information structure..
 */
static int yenta_open(pci_socket_t *socket)
{
        int i;
        struct pci_dev *dev = socket->dev;

        /*
         * Do some basic sanity checking..
         */
        if (pci_enable_device(dev))
                return -1;
        if (!pci_resource_start(dev, 0)) {
                printk("No cardbus resource!\n");
                return -1;
        }

        /*
         * Ok, start setup.. Map the cardbus registers,
         * and request the IRQ.
         */
        socket->base = ioremap(pci_resource_start(dev, 0), 0x1000);
        if (!socket->base)
                return -1;

        yenta_config_init(socket);

        /* Disable all events */
        cb_writel(socket, CB_SOCKET_MASK, 0x0);

        /* Set up the bridge regions.. */
        yenta_allocate_resources(socket);

        if (dev->irq && !request_irq(dev->irq, yenta_interrupt, SA_SHIRQ, dev->name, socket))
                socket->cb_irq = dev->irq;

        /* Do we have special options for the device? */
        for (i = 0; i < NR_OVERRIDES; i++) {
                struct cardbus_override_struct *d = cardbus_override+i;
                if (dev->vendor == d->vendor && dev->device == d->device) {
                        socket->op = d->op;
                        if (d->op->open) {
                                int retval = d->op->open(socket);
                                if (retval < 0)
                                        return retval;
                        }
                }
        }

        kernel_thread(yenta_socket_thread, socket, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
        return 0;
}

/*
 * Standard plain cardbus - no frills, no extensions
 */
struct pci_socket_ops yenta_operations = {
        yenta_open,
        yenta_close,
        yenta_init,
        yenta_suspend,
        yenta_get_status,
        yenta_get_socket,
        yenta_set_socket,
        yenta_get_io_map,
        yenta_set_io_map,
        yenta_get_mem_map,
        yenta_set_mem_map,
        yenta_proc_setup
};
EXPORT_SYMBOL(yenta_operations);