?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
- Kai Germaschewski: ymfpci cleanups and resource leak fixes
[davej-history.git] / drivers / char / serial.c
blob2f0d81617051de1117f4e2466423a2c310be7f12
1 /*
2 * linux/drivers/char/serial.c
3 *
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
6 * 1998, 1999 Theodore Ts'o
7 *
8 * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now
9 * much more extensible to support other serial cards based on the
10 * 16450/16550A UART's. Added support for the AST FourPort and the
11 * Accent Async board.
12 *
13 * set_serial_info fixed to set the flags, custom divisor, and uart
14 * type fields. Fix suggested by Michael K. Johnson 12/12/92.
15 *
16 * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis <ah@doc.ic.ac.uk>
17 *
18 * 03/96: Modularised by Angelo Haritsis <ah@doc.ic.ac.uk>
19 *
20 * rs_set_termios fixed to look also for changes of the input
21 * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK.
22 * Bernd Anhäupl 05/17/96.
23 *
24 * 1/97: Extended dumb serial ports are a config option now.
25 * Saves 4k. Michael A. Griffith <grif@acm.org>
26 *
27 * 8/97: Fix bug in rs_set_termios with RTS
28 * Stanislav V. Voronyi <stas@uanet.kharkov.ua>
29 *
30 * 3/98: Change the IRQ detection, use of probe_irq_o*(),
31 * supress TIOCSERGWILD and TIOCSERSWILD
32 * Etienne Lorrain <etienne.lorrain@ibm.net>
33 *
34 * 4/98: Added changes to support the ARM architecture proposed by
35 * Russell King
36 *
37 * 5/99: Updated to include support for the XR16C850 and ST16C654
38 * uarts. Stuart MacDonald <stuartm@connecttech.com>
39 *
40 * 8/99: Generalized PCI support added. Theodore Ts'o
41 *
42 * 3/00: Rid circular buffer of redundant xmit_cnt. Fix a
43 * few races on freeing buffers too.
44 * Alan Modra <alan@linuxcare.com>
45 *
46 * 5/00: Support for the RSA-DV II/S card added.
47 * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
48 *
49 * 6/00: Remove old-style timer, use timer_list
50 * Andrew Morton <andrewm@uow.edu.au>
51 *
52 * 7/00: Support Timedia/Sunix/Exsys PCI cards
53 *
54 * 7/00: fix some returns on failure not using MOD_DEC_USE_COUNT.
55 * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
56 *
57 * This module exports the following rs232 io functions:
58 *
59 * int rs_init(void);
60 */
61
62 static char *serial_version = "5.02";
63 static char *serial_revdate = "2000-08-09";
64
65 /*
66 * Serial driver configuration section. Here are the various options:
67 *
68 * CONFIG_HUB6
69 * Enables support for the venerable Bell Technologies
70 * HUB6 card.
71 *
72 * CONFIG_SERIAL_MANY_PORTS
73 * Enables support for ports beyond the standard, stupid
74 * COM 1/2/3/4.
75 *
76 * CONFIG_SERIAL_MULTIPORT
77 * Enables support for special multiport board support.
78 *
79 * CONFIG_SERIAL_SHARE_IRQ
80 * Enables support for multiple serial ports on one IRQ
81 *
82 * CONFIG_SERIAL_DETECT_IRQ
83 * Enable the autodetection of IRQ on standart ports
84 *
85 * SERIAL_PARANOIA_CHECK
86 * Check the magic number for the async_structure where
87 * ever possible.
88 */
89
90 #include <linux/config.h>
91 #include <linux/version.h>
92
93 #undef SERIAL_PARANOIA_CHECK
94 #define CONFIG_SERIAL_NOPAUSE_IO
95 #define SERIAL_DO_RESTART
96
97 #if 0
98 /* These defines are normally controlled by the autoconf.h */
99 #define CONFIG_SERIAL_MANY_PORTS
100 #define CONFIG_SERIAL_SHARE_IRQ
101 #define CONFIG_SERIAL_DETECT_IRQ
102 #define CONFIG_SERIAL_MULTIPORT
103 #define CONFIG_HUB6
104 #endif
105
106 #ifdef CONFIG_PCI
107 #define ENABLE_SERIAL_PCI
108 #ifndef CONFIG_SERIAL_SHARE_IRQ
109 #define CONFIG_SERIAL_SHARE_IRQ
110 #endif
111 #ifndef CONFIG_SERIAL_MANY_PORTS
112 #define CONFIG_SERIAL_MANY_PORTS
113 #endif
114 #endif
115
116 #if defined(CONFIG_ISAPNP)|| (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
117 #ifndef ENABLE_SERIAL_PNP
118 #define ENABLE_SERIAL_PNP
119 #endif
120 #endif
121
122 /* Set of debugging defines */
123
124 #undef SERIAL_DEBUG_INTR
125 #undef SERIAL_DEBUG_OPEN
126 #undef SERIAL_DEBUG_FLOW
127 #undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
128 #undef SERIAL_DEBUG_PCI
129 #undef SERIAL_DEBUG_AUTOCONF
130
131 /* Sanity checks */
132
133 #ifdef CONFIG_SERIAL_MULTIPORT
134 #ifndef CONFIG_SERIAL_SHARE_IRQ
135 #define CONFIG_SERIAL_SHARE_IRQ
136 #endif
137 #endif
138
139 #ifdef CONFIG_HUB6
140 #ifndef CONFIG_SERIAL_MANY_PORTS
141 #define CONFIG_SERIAL_MANY_PORTS
142 #endif
143 #ifndef CONFIG_SERIAL_SHARE_IRQ
144 #define CONFIG_SERIAL_SHARE_IRQ
145 #endif
146 #endif
147
148 #ifdef MODULE
149 #undef CONFIG_SERIAL_CONSOLE
150 #endif
151
152 #define CONFIG_SERIAL_RSA
153
154 #define RS_STROBE_TIME (10*HZ)
155 #define RS_ISR_PASS_LIMIT 256
156
157 #if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
158 #define SERIAL_INLINE
159 #endif
160
161 /*
162 * End of serial driver configuration section.
163 */
164
165 #ifdef MODVERSIONS
166 #include <linux/modversions.h>
167 #endif
168 #include <linux/module.h>
169
170 #include <linux/types.h>
171 #ifdef LOCAL_HEADERS
172 #include "serial_local.h"
173 #else
174 #include <linux/serial.h>
175 #include <linux/serialP.h>
176 #include <linux/serial_reg.h>
177 #include <asm/serial.h>
178 #define LOCAL_VERSTRING ""
179 #endif
180
181 #include <linux/errno.h>
182 #include <linux/signal.h>
183 #include <linux/sched.h>
184 #include <linux/timer.h>
185 #include <linux/interrupt.h>
186 #include <linux/tty.h>
187 #include <linux/tty_flip.h>
188 #include <linux/major.h>
189 #include <linux/string.h>
190 #include <linux/fcntl.h>
191 #include <linux/ptrace.h>
192 #include <linux/ioport.h>
193 #include <linux/mm.h>
194 #include <linux/malloc.h>
195 #if (LINUX_VERSION_CODE >= 131343)
196 #include <linux/init.h>
197 #endif
198 #if (LINUX_VERSION_CODE >= 131336)
199 #include <asm/uaccess.h>
200 #endif
201 #include <linux/delay.h>
202 #ifdef CONFIG_SERIAL_CONSOLE
203 #include <linux/console.h>
204 #endif
205 #ifdef ENABLE_SERIAL_PCI
206 #include <linux/pci.h>
207 #endif
208 #ifdef ENABLE_SERIAL_PNP
209 #include <linux/isapnp.h>
210 #endif
211 #ifdef CONFIG_MAGIC_SYSRQ
212 #include <linux/sysrq.h>
213 #endif
214
215 /*
216 * All of the compatibilty code so we can compile serial.c against
217 * older kernels is hidden in serial_compat.h
218 */
219 #if defined(LOCAL_HEADERS) || (LINUX_VERSION_CODE < 0x020317) /* 2.3.23 */
220 #include "serial_compat.h"
221 #endif
222
223 #include <asm/system.h>
224 #include <asm/io.h>
225 #include <asm/irq.h>
226 #include <asm/bitops.h>
227
228 #ifdef CONFIG_MAC_SERIAL
229 #define SERIAL_DEV_OFFSET 2
230 #else
231 #define SERIAL_DEV_OFFSET 0
232 #endif
233
234 #ifdef SERIAL_INLINE
235 #define _INLINE_ inline
236 #else
237 #define _INLINE_
238 #endif
239
240 static char *serial_name = "Serial driver";
241
242 static DECLARE_TASK_QUEUE(tq_serial);
243
244 static struct tty_driver serial_driver, callout_driver;
245 static int serial_refcount;
246
247 static struct timer_list serial_timer;
248
249 /* serial subtype definitions */
250 #ifndef SERIAL_TYPE_NORMAL
251 #define SERIAL_TYPE_NORMAL 1
252 #define SERIAL_TYPE_CALLOUT 2
253 #endif
254
255 /* number of characters left in xmit buffer before we ask for more */
256 #define WAKEUP_CHARS 256
257
258 /*
259 * IRQ_timeout - How long the timeout should be for each IRQ
260 * should be after the IRQ has been active.
261 */
262
263 static struct async_struct *IRQ_ports[NR_IRQS];
264 #ifdef CONFIG_SERIAL_MULTIPORT
265 static struct rs_multiport_struct rs_multiport[NR_IRQS];
266 #endif
267 static int IRQ_timeout[NR_IRQS];
268 #ifdef CONFIG_SERIAL_CONSOLE
269 static struct console sercons;
270 static int lsr_break_flag;
271 #endif
272 #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
273 static unsigned long break_pressed; /* break, really ... */
274 #endif
275
276 static unsigned detect_uart_irq (struct serial_state * state);
277 static void autoconfig(struct serial_state * state);
278 static void change_speed(struct async_struct *info, struct termios *old);
279 static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
280
281 /*
282 * Here we define the default xmit fifo size used for each type of
283 * UART
284 */
285 static struct serial_uart_config uart_config[] = {
286 { "unknown", 1, 0 },
287 { "8250", 1, 0 },
288 { "16450", 1, 0 },
289 { "16550", 1, 0 },
290 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
291 { "cirrus", 1, 0 }, /* usurped by cyclades.c */
292 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
293 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
294 UART_STARTECH },
295 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
296 { "Startech", 1, 0}, /* usurped by cyclades.c */
297 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO},
298 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO |
299 UART_STARTECH },
300 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO |
301 UART_STARTECH },
302 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO },
303 { 0, 0}
304 };
305
306 #if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
307
308 #define PORT_RSA_MAX 4
309 static int probe_rsa[PORT_RSA_MAX];
310 static int force_rsa[PORT_RSA_MAX];
311
312 MODULE_PARM(probe_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
313 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
314 MODULE_PARM(force_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
315 MODULE_PARM_DESC(force_rsa, "Force I/O ports for RSA");
316 #endif /* CONFIG_SERIAL_RSA */
317
318 static struct serial_state rs_table[RS_TABLE_SIZE] = {
319 SERIAL_PORT_DFNS /* Defined in serial.h */
320 };
321
322 #define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
323
324 #if (defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP))
325 #define NR_PCI_BOARDS 8
326
327 static struct pci_board_inst serial_pci_board[NR_PCI_BOARDS];
328 static int serial_pci_board_idx;
329
330 #ifndef IS_PCI_REGION_IOPORT
331 #define IS_PCI_REGION_IOPORT(dev, r) (pci_resource_flags((dev), (r)) & \
332 IORESOURCE_IO)
333 #endif
334 #ifndef IS_PCI_REGION_IOMEM
335 #define IS_PCI_REGION_IOMEM(dev, r) (pci_resource_flags((dev), (r)) & \
336 IORESOURCE_MEM)
337 #endif
338 #ifndef PCI_IRQ_RESOURCE
339 #define PCI_IRQ_RESOURCE(dev, r) ((dev)->irq_resource[r].start)
340 #endif
341 #ifndef pci_get_subvendor
342 #define pci_get_subvendor(dev) ((dev)->subsystem_vendor)
343 #define pci_get_subdevice(dev) ((dev)->subsystem_device)
344 #endif
345 #endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
346
347 #ifndef PREPARE_FUNC
348 #define PREPARE_FUNC(dev) (dev->prepare)
349 #define ACTIVATE_FUNC(dev) (dev->activate)
350 #define DEACTIVATE_FUNC(dev) (dev->deactivate)
351 #endif
352
353 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
354
355 static struct tty_struct *serial_table[NR_PORTS];
356 static struct termios *serial_termios[NR_PORTS];
357 static struct termios *serial_termios_locked[NR_PORTS];
358
359
360 #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
361 #define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
362 kdevname(tty->device), (info->flags), serial_refcount,info->count,tty->count,s)
363 #else
364 #define DBG_CNT(s)
365 #endif
366
367 /*
368 * tmp_buf is used as a temporary buffer by serial_write. We need to
369 * lock it in case the copy_from_user blocks while swapping in a page,
370 * and some other program tries to do a serial write at the same time.
371 * Since the lock will only come under contention when the system is
372 * swapping and available memory is low, it makes sense to share one
373 * buffer across all the serial ports, since it significantly saves
374 * memory if large numbers of serial ports are open.
375 */
376 static unsigned char *tmp_buf;
377 #ifdef DECLARE_MUTEX
378 static DECLARE_MUTEX(tmp_buf_sem);
379 #else
380 static struct semaphore tmp_buf_sem = MUTEX;
381 #endif
382
383
384 static inline int serial_paranoia_check(struct async_struct *info,
385 kdev_t device, const char *routine)
386 {
387 #ifdef SERIAL_PARANOIA_CHECK
388 static const char *badmagic =
389 "Warning: bad magic number for serial struct (%s) in %s\n";
390 static const char *badinfo =
391 "Warning: null async_struct for (%s) in %s\n";
392
393 if (!info) {
394 printk(badinfo, kdevname(device), routine);
395 return 1;
396 }
397 if (info->magic != SERIAL_MAGIC) {
398 printk(badmagic, kdevname(device), routine);
399 return 1;
400 }
401 #endif
402 return 0;
403 }
404
405 static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
406 {
407 switch (info->io_type) {
408 #ifdef CONFIG_HUB6
409 case SERIAL_IO_HUB6:
410 outb(info->hub6 - 1 + offset, info->port);
411 return inb(info->port+1);
412 #endif
413 case SERIAL_IO_MEM:
414 return readb((unsigned long) info->iomem_base +
415 (offset<<info->iomem_reg_shift));
416 #ifdef CONFIG_SERIAL_GSC
417 case SERIAL_IO_GSC:
418 return gsc_readb(info->iomem_base + offset);
419 #endif
420 default:
421 return inb(info->port + offset);
422 }
423 }
424
425 static _INLINE_ void serial_out(struct async_struct *info, int offset,
426 int value)
427 {
428 switch (info->io_type) {
429 #ifdef CONFIG_HUB6
430 case SERIAL_IO_HUB6:
431 outb(info->hub6 - 1 + offset, info->port);
432 outb(value, info->port+1);
433 break;
434 #endif
435 case SERIAL_IO_MEM:
436 writeb(value, (unsigned long) info->iomem_base +
437 (offset<<info->iomem_reg_shift));
438 break;
439 #ifdef CONFIG_SERIAL_GSC
440 case SERIAL_IO_GSC:
441 gsc_writeb(value, info->iomem_base + offset);
442 break;
443 #endif
444 default:
445 outb(value, info->port+offset);
446 }
447 }
448
449 /*
450 * We used to support using pause I/O for certain machines. We
451 * haven't supported this for a while, but just in case it's badly
452 * needed for certain old 386 machines, I've left these #define's
453 * in....
454 */
455 #define serial_inp(info, offset) serial_in(info, offset)
456 #define serial_outp(info, offset, value) serial_out(info, offset, value)
457
458
459 /*
460 * For the 16C950
461 */
462 void serial_icr_write(struct async_struct *info, int offset, int value)
463 {
464 serial_out(info, UART_SCR, offset);
465 serial_out(info, UART_ICR, value);
466 }
467
468 unsigned int serial_icr_read(struct async_struct *info, int offset)
469 {
470 int value;
471
472 serial_icr_write(info, UART_ACR, info->ACR | UART_ACR_ICRRD);
473 serial_out(info, UART_SCR, offset);
474 value = serial_in(info, UART_ICR);
475 serial_icr_write(info, UART_ACR, info->ACR);
476 return value;
477 }
478
479 /*
480 * ------------------------------------------------------------
481 * rs_stop() and rs_start()
482 *
483 * This routines are called before setting or resetting tty->stopped.
484 * They enable or disable transmitter interrupts, as necessary.
485 * ------------------------------------------------------------
486 */
487 static void rs_stop(struct tty_struct *tty)
488 {
489 struct async_struct *info = (struct async_struct *)tty->driver_data;
490 unsigned long flags;
491
492 if (serial_paranoia_check(info, tty->device, "rs_stop"))
493 return;
494
495 save_flags(flags); cli();
496 if (info->IER & UART_IER_THRI) {
497 info->IER &= ~UART_IER_THRI;
498 serial_out(info, UART_IER, info->IER);
499 }
500 if (info->state->type == PORT_16C950) {
501 info->ACR |= UART_ACR_TXDIS;
502 serial_icr_write(info, UART_ACR, info->ACR);
503 }
504 restore_flags(flags);
505 }
506
507 static void rs_start(struct tty_struct *tty)
508 {
509 struct async_struct *info = (struct async_struct *)tty->driver_data;
510 unsigned long flags;
511
512 if (serial_paranoia_check(info, tty->device, "rs_start"))
513 return;
514
515 save_flags(flags); cli();
516 if (info->xmit.head != info->xmit.tail
517 && info->xmit.buf
518 && !(info->IER & UART_IER_THRI)) {
519 info->IER |= UART_IER_THRI;
520 serial_out(info, UART_IER, info->IER);
521 }
522 if (info->state->type == PORT_16C950) {
523 info->ACR &= ~UART_ACR_TXDIS;
524 serial_icr_write(info, UART_ACR, info->ACR);
525 }
526 restore_flags(flags);
527 }
528
529 /*
530 * ----------------------------------------------------------------------
531 *
532 * Here starts the interrupt handling routines. All of the following
533 * subroutines are declared as inline and are folded into
534 * rs_interrupt(). They were separated out for readability's sake.
535 *
536 * Note: rs_interrupt() is a "fast" interrupt, which means that it
537 * runs with interrupts turned off. People who may want to modify
538 * rs_interrupt() should try to keep the interrupt handler as fast as
539 * possible. After you are done making modifications, it is not a bad
540 * idea to do:
541 *
542 * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
543 *
544 * and look at the resulting assemble code in serial.s.
545 *
546 * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
547 * -----------------------------------------------------------------------
548 */
549
550 /*
551 * This routine is used by the interrupt handler to schedule
552 * processing in the software interrupt portion of the driver.
553 */
554 static _INLINE_ void rs_sched_event(struct async_struct *info,
555 int event)
556 {
557 info->event |= 1 << event;
558 queue_task(&info->tqueue, &tq_serial);
559 mark_bh(SERIAL_BH);
560 }
561
562 static _INLINE_ void receive_chars(struct async_struct *info,
563 int *status, struct pt_regs * regs)
564 {
565 struct tty_struct *tty = info->tty;
566 unsigned char ch;
567 int ignored = 0;
568 struct async_icount *icount;
569
570 icount = &info->state->icount;
571 do {
572 ch = serial_inp(info, UART_RX);
573 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
574 goto ignore_char;
575 *tty->flip.char_buf_ptr = ch;
576 icount->rx++;
577
578 #ifdef SERIAL_DEBUG_INTR
579 printk("DR%02x:%02x...", ch, *status);
580 #endif
581 *tty->flip.flag_buf_ptr = 0;
582 if (*status & (UART_LSR_BI | UART_LSR_PE |
583 UART_LSR_FE | UART_LSR_OE)) {
584 /*
585 * For statistics only
586 */
587 if (*status & UART_LSR_BI) {
588 *status &= ~(UART_LSR_FE | UART_LSR_PE);
589 icount->brk++;
590 /*
591 * We do the SysRQ and SAK checking
592 * here because otherwise the break
593 * may get masked by ignore_status_mask
594 * or read_status_mask.
595 */
596 #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
597 if (info->line == sercons.index) {
598 if (!break_pressed) {
599 break_pressed = jiffies;
600 goto ignore_char;
601 }
602 break_pressed = 0;
603 }
604 #endif
605 if (info->flags & ASYNC_SAK)
606 do_SAK(tty);
607 } else if (*status & UART_LSR_PE)
608 icount->parity++;
609 else if (*status & UART_LSR_FE)
610 icount->frame++;
611 if (*status & UART_LSR_OE)
612 icount->overrun++;
613
614 /*
615 * Now check to see if character should be
616 * ignored, and mask off conditions which
617 * should be ignored.
618 */
619 if (*status & info->ignore_status_mask) {
620 if (++ignored > 100)
621 break;
622 goto ignore_char;
623 }
624 *status &= info->read_status_mask;
625
626 #ifdef CONFIG_SERIAL_CONSOLE
627 if (info->line == sercons.index) {
628 /* Recover the break flag from console xmit */
629 *status |= lsr_break_flag;
630 lsr_break_flag = 0;
631 }
632 #endif
633 if (*status & (UART_LSR_BI)) {
634 #ifdef SERIAL_DEBUG_INTR
635 printk("handling break....");
636 #endif
637 *tty->flip.flag_buf_ptr = TTY_BREAK;
638 } else if (*status & UART_LSR_PE)
639 *tty->flip.flag_buf_ptr = TTY_PARITY;
640 else if (*status & UART_LSR_FE)
641 *tty->flip.flag_buf_ptr = TTY_FRAME;
642 if (*status & UART_LSR_OE) {
643 /*
644 * Overrun is special, since it's
645 * reported immediately, and doesn't
646 * affect the current character
647 */
648 tty->flip.count++;
649 tty->flip.flag_buf_ptr++;
650 tty->flip.char_buf_ptr++;
651 *tty->flip.flag_buf_ptr = TTY_OVERRUN;
652 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
653 goto ignore_char;
654 }
655 }
656 #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
657 if (break_pressed && info->line == sercons.index) {
658 if (ch != 0 &&
659 time_before(jiffies, break_pressed + HZ*5)) {
660 handle_sysrq(ch, regs, NULL, NULL);
661 break_pressed = 0;
662 goto ignore_char;
663 }
664 break_pressed = 0;
665 }
666 #endif
667 tty->flip.flag_buf_ptr++;
668 tty->flip.char_buf_ptr++;
669 tty->flip.count++;
670 ignore_char:
671 *status = serial_inp(info, UART_LSR);
672 } while (*status & UART_LSR_DR);
673 #if (LINUX_VERSION_CODE > 131394) /* 2.1.66 */
674 tty_flip_buffer_push(tty);
675 #else
676 queue_task(&tty->flip.tqueue, &tq_timer);
677 #endif
678 }
679
680 static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
681 {
682 int count;
683
684 if (info->x_char) {
685 serial_outp(info, UART_TX, info->x_char);
686 info->state->icount.tx++;
687 info->x_char = 0;
688 if (intr_done)
689 *intr_done = 0;
690 return;
691 }
692 if (info->xmit.head == info->xmit.tail
693 || info->tty->stopped
694 || info->tty->hw_stopped) {
695 info->IER &= ~UART_IER_THRI;
696 serial_out(info, UART_IER, info->IER);
697 return;
698 }
699
700 count = info->xmit_fifo_size;
701 do {
702 serial_out(info, UART_TX, info->xmit.buf[info->xmit.tail]);
703 info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
704 info->state->icount.tx++;
705 if (info->xmit.head == info->xmit.tail)
706 break;
707 } while (--count > 0);
708
709 if (CIRC_CNT(info->xmit.head,
710 info->xmit.tail,
711 SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
712 rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
713
714 #ifdef SERIAL_DEBUG_INTR
715 printk("THRE...");
716 #endif
717 if (intr_done)
718 *intr_done = 0;
719
720 if (info->xmit.head == info->xmit.tail) {
721 info->IER &= ~UART_IER_THRI;
722 serial_out(info, UART_IER, info->IER);
723 }
724 }
725
726 static _INLINE_ void check_modem_status(struct async_struct *info)
727 {
728 int status;
729 struct async_icount *icount;
730
731 status = serial_in(info, UART_MSR);
732
733 if (status & UART_MSR_ANY_DELTA) {
734 icount = &info->state->icount;
735 /* update input line counters */
736 if (status & UART_MSR_TERI)
737 icount->rng++;
738 if (status & UART_MSR_DDSR)
739 icount->dsr++;
740 if (status & UART_MSR_DDCD) {
741 icount->dcd++;
742 #ifdef CONFIG_HARD_PPS
743 if ((info->flags & ASYNC_HARDPPS_CD) &&
744 (status & UART_MSR_DCD))
745 hardpps();
746 #endif
747 }
748 if (status & UART_MSR_DCTS)
749 icount->cts++;
750 wake_up_interruptible(&info->delta_msr_wait);
751 }
752
753 if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
754 #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
755 printk("ttys%d CD now %s...", info->line,
756 (status & UART_MSR_DCD) ? "on" : "off");
757 #endif
758 if (status & UART_MSR_DCD)
759 wake_up_interruptible(&info->open_wait);
760 else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
761 (info->flags & ASYNC_CALLOUT_NOHUP))) {
762 #ifdef SERIAL_DEBUG_OPEN
763 printk("doing serial hangup...");
764 #endif
765 if (info->tty)
766 tty_hangup(info->tty);
767 }
768 }
769 if (info->flags & ASYNC_CTS_FLOW) {
770 if (info->tty->hw_stopped) {
771 if (status & UART_MSR_CTS) {
772 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
773 printk("CTS tx start...");
774 #endif
775 info->tty->hw_stopped = 0;
776 info->IER |= UART_IER_THRI;
777 serial_out(info, UART_IER, info->IER);
778 rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
779 return;
780 }
781 } else {
782 if (!(status & UART_MSR_CTS)) {
783 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
784 printk("CTS tx stop...");
785 #endif
786 info->tty->hw_stopped = 1;
787 info->IER &= ~UART_IER_THRI;
788 serial_out(info, UART_IER, info->IER);
789 }
790 }
791 }
792 }
793
794 #ifdef CONFIG_SERIAL_SHARE_IRQ
795 /*
796 * This is the serial driver's generic interrupt routine
797 */
798 static void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
799 {
800 int status;
801 struct async_struct * info;
802 int pass_counter = 0;
803 struct async_struct *end_mark = 0;
804 #ifdef CONFIG_SERIAL_MULTIPORT
805 int first_multi = 0;
806 struct rs_multiport_struct *multi;
807 #endif
808
809 #ifdef SERIAL_DEBUG_INTR
810 printk("rs_interrupt(%d)...", irq);
811 #endif
812
813 info = IRQ_ports[irq];
814 if (!info)
815 return;
816
817 #ifdef CONFIG_SERIAL_MULTIPORT
818 multi = &rs_multiport[irq];
819 if (multi->port_monitor)
820 first_multi = inb(multi->port_monitor);
821 #endif
822
823 do {
824 if (!info->tty ||
825 (serial_in(info, UART_IIR) & UART_IIR_NO_INT)) {
826 if (!end_mark)
827 end_mark = info;
828 goto next;
829 }
830 end_mark = 0;
831
832 info->last_active = jiffies;
833
834 status = serial_inp(info, UART_LSR);
835 #ifdef SERIAL_DEBUG_INTR
836 printk("status = %x...", status);
837 #endif
838 if (status & UART_LSR_DR)
839 receive_chars(info, &status, regs);
840 check_modem_status(info);
841 if (status & UART_LSR_THRE)
842 transmit_chars(info, 0);
843
844 next:
845 info = info->next_port;
846 if (!info) {
847 info = IRQ_ports[irq];
848 if (pass_counter++ > RS_ISR_PASS_LIMIT) {
849 #if 0
850 printk("rs loop break\n");
851 #endif
852 break; /* Prevent infinite loops */
853 }
854 continue;
855 }
856 } while (end_mark != info);
857 #ifdef CONFIG_SERIAL_MULTIPORT
858 if (multi->port_monitor)
859 printk("rs port monitor (normal) irq %d: 0x%x, 0x%x\n",
860 info->state->irq, first_multi,
861 inb(multi->port_monitor));
862 #endif
863 #ifdef SERIAL_DEBUG_INTR
864 printk("end.\n");
865 #endif
866 }
867 #endif /* #ifdef CONFIG_SERIAL_SHARE_IRQ */
868
869
870 /*
871 * This is the serial driver's interrupt routine for a single port
872 */
873 static void rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
874 {
875 int status;
876 int pass_counter = 0;
877 struct async_struct * info;
878 #ifdef CONFIG_SERIAL_MULTIPORT
879 int first_multi = 0;
880 struct rs_multiport_struct *multi;
881 #endif
882
883 #ifdef SERIAL_DEBUG_INTR
884 printk("rs_interrupt_single(%d)...", irq);
885 #endif
886
887 info = IRQ_ports[irq];
888 if (!info || !info->tty)
889 return;
890
891 #ifdef CONFIG_SERIAL_MULTIPORT
892 multi = &rs_multiport[irq];
893 if (multi->port_monitor)
894 first_multi = inb(multi->port_monitor);
895 #endif
896
897 do {
898 status = serial_inp(info, UART_LSR);
899 #ifdef SERIAL_DEBUG_INTR
900 printk("status = %x...", status);
901 #endif
902 if (status & UART_LSR_DR)
903 receive_chars(info, &status, regs);
904 check_modem_status(info);
905 if (status & UART_LSR_THRE)
906 transmit_chars(info, 0);
907 if (pass_counter++ > RS_ISR_PASS_LIMIT) {
908 #if 0
909 printk("rs_single loop break.\n");
910 #endif
911 break;
912 }
913 } while (!(serial_in(info, UART_IIR) & UART_IIR_NO_INT));
914 info->last_active = jiffies;
915 #ifdef CONFIG_SERIAL_MULTIPORT
916 if (multi->port_monitor)
917 printk("rs port monitor (single) irq %d: 0x%x, 0x%x\n",
918 info->state->irq, first_multi,
919 inb(multi->port_monitor));
920 #endif
921 #ifdef SERIAL_DEBUG_INTR
922 printk("end.\n");
923 #endif
924 }
925
926 #ifdef CONFIG_SERIAL_MULTIPORT
927 /*
928 * This is the serial driver's for multiport boards
929 */
930 static void rs_interrupt_multi(int irq, void *dev_id, struct pt_regs * regs)
931 {
932 int status;
933 struct async_struct * info;
934 int pass_counter = 0;
935 int first_multi= 0;
936 struct rs_multiport_struct *multi;
937
938 #ifdef SERIAL_DEBUG_INTR
939 printk("rs_interrupt_multi(%d)...", irq);
940 #endif
941
942 info = IRQ_ports[irq];
943 if (!info)
944 return;
945 multi = &rs_multiport[irq];
946 if (!multi->port1) {
947 /* Should never happen */
948 printk("rs_interrupt_multi: NULL port1!\n");
949 return;
950 }
951 if (multi->port_monitor)
952 first_multi = inb(multi->port_monitor);
953
954 while (1) {
955 if (!info->tty ||
956 (serial_in(info, UART_IIR) & UART_IIR_NO_INT))
957 goto next;
958
959 info->last_active = jiffies;
960
961 status = serial_inp(info, UART_LSR);
962 #ifdef SERIAL_DEBUG_INTR
963 printk("status = %x...", status);
964 #endif
965 if (status & UART_LSR_DR)
966 receive_chars(info, &status, regs);
967 check_modem_status(info);
968 if (status & UART_LSR_THRE)
969 transmit_chars(info, 0);
970
971 next:
972 info = info->next_port;
973 if (info)
974 continue;
975
976 info = IRQ_ports[irq];
977 /*
978 * The user was a bonehead, and misconfigured their
979 * multiport info. Rather than lock up the kernel
980 * in an infinite loop, if we loop too many times,
981 * print a message and break out of the loop.
982 */
983 if (pass_counter++ > RS_ISR_PASS_LIMIT) {
984 printk("Misconfigured multiport serial info "
985 "for irq %d. Breaking out irq loop\n", irq);
986 break;
987 }
988 if (multi->port_monitor)
989 printk("rs port monitor irq %d: 0x%x, 0x%x\n",
990 info->state->irq, first_multi,
991 inb(multi->port_monitor));
992 if ((inb(multi->port1) & multi->mask1) != multi->match1)
993 continue;
994 if (!multi->port2)
995 break;
996 if ((inb(multi->port2) & multi->mask2) != multi->match2)
997 continue;
998 if (!multi->port3)
999 break;
1000 if ((inb(multi->port3) & multi->mask3) != multi->match3)
1001 continue;
1002 if (!multi->port4)
1003 break;
1004 if ((inb(multi->port4) & multi->mask4) != multi->match4)
1005 continue;
1006 break;
1007 }
1008 #ifdef SERIAL_DEBUG_INTR
1009 printk("end.\n");
1010 #endif
1011 }
1012 #endif
1013
1014 /*
1015 * -------------------------------------------------------------------
1016 * Here ends the serial interrupt routines.
1017 * -------------------------------------------------------------------
1018 */
1019
1020 /*
1021 * This routine is used to handle the "bottom half" processing for the
1022 * serial driver, known also the "software interrupt" processing.
1023 * This processing is done at the kernel interrupt level, after the
1024 * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
1025 * is where time-consuming activities which can not be done in the
1026 * interrupt driver proper are done; the interrupt driver schedules
1027 * them using rs_sched_event(), and they get done here.
1028 */
1029 static void do_serial_bh(void)
1030 {
1031 run_task_queue(&tq_serial);
1032 }
1033
1034 static void do_softint(void *private_)
1035 {
1036 struct async_struct *info = (struct async_struct *) private_;
1037 struct tty_struct *tty;
1038
1039 tty = info->tty;
1040 if (!tty)
1041 return;
1042
1043 if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
1044 if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
1045 tty->ldisc.write_wakeup)
1046 (tty->ldisc.write_wakeup)(tty);
1047 wake_up_interruptible(&tty->write_wait);
1048 #ifdef SERIAL_HAVE_POLL_WAIT
1049 wake_up_interruptible(&tty->poll_wait);
1050 #endif
1051 }
1052 }
1053
1054 /*
1055 * This subroutine is called when the RS_TIMER goes off. It is used
1056 * by the serial driver to handle ports that do not have an interrupt
1057 * (irq=0). This doesn't work very well for 16450's, but gives barely
1058 * passable results for a 16550A. (Although at the expense of much
1059 * CPU overhead).
1060 */
1061 static void rs_timer(unsigned long dummy)
1062 {
1063 static unsigned long last_strobe;
1064 struct async_struct *info;
1065 unsigned int i;
1066 unsigned long flags;
1067
1068 if ((jiffies - last_strobe) >= RS_STROBE_TIME) {
1069 for (i=0; i < NR_IRQS; i++) {
1070 info = IRQ_ports[i];
1071 if (!info)
1072 continue;
1073 save_flags(flags); cli();
1074 #ifdef CONFIG_SERIAL_SHARE_IRQ
1075 if (info->next_port) {
1076 do {
1077 serial_out(info, UART_IER, 0);
1078 info->IER |= UART_IER_THRI;
1079 serial_out(info, UART_IER, info->IER);
1080 info = info->next_port;
1081 } while (info);
1082 #ifdef CONFIG_SERIAL_MULTIPORT
1083 if (rs_multiport[i].port1)
1084 rs_interrupt_multi(i, NULL, NULL);
1085 else
1086 #endif
1087 rs_interrupt(i, NULL, NULL);
1088 } else
1089 #endif /* CONFIG_SERIAL_SHARE_IRQ */
1090 rs_interrupt_single(i, NULL, NULL);
1091 restore_flags(flags);
1092 }
1093 }
1094 last_strobe = jiffies;
1095 mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
1096
1097 if (IRQ_ports[0]) {
1098 save_flags(flags); cli();
1099 #ifdef CONFIG_SERIAL_SHARE_IRQ
1100 rs_interrupt(0, NULL, NULL);
1101 #else
1102 rs_interrupt_single(0, NULL, NULL);
1103 #endif
1104 restore_flags(flags);
1105
1106 mod_timer(&serial_timer, jiffies + IRQ_timeout[0]);
1107 }
1108 }
1109
1110 /*
1111 * ---------------------------------------------------------------
1112 * Low level utility subroutines for the serial driver: routines to
1113 * figure out the appropriate timeout for an interrupt chain, routines
1114 * to initialize and startup a serial port, and routines to shutdown a
1115 * serial port. Useful stuff like that.
1116 * ---------------------------------------------------------------
1117 */
1118
1119 /*
1120 * This routine figures out the correct timeout for a particular IRQ.
1121 * It uses the smallest timeout of all of the serial ports in a
1122 * particular interrupt chain. Now only used for IRQ 0....
1123 */
1124 static void figure_IRQ_timeout(int irq)
1125 {
1126 struct async_struct *info;
1127 int timeout = 60*HZ; /* 60 seconds === a long time :-) */
1128
1129 info = IRQ_ports[irq];
1130 if (!info) {
1131 IRQ_timeout[irq] = 60*HZ;
1132 return;
1133 }
1134 while (info) {
1135 if (info->timeout < timeout)
1136 timeout = info->timeout;
1137 info = info->next_port;
1138 }
1139 if (!irq)
1140 timeout = timeout / 2;
1141 IRQ_timeout[irq] = (timeout > 3) ? timeout-2 : 1;
1142 }
1143
1144 #ifdef CONFIG_SERIAL_RSA
1145 /* Attempts to turn on the RSA FIFO. Returns zero on failure */
1146 static int enable_rsa(struct async_struct *info)
1147 {
1148 unsigned char mode;
1149 int result;
1150 unsigned long flags;
1151
1152 save_flags(flags); cli();
1153 mode = serial_inp(info, UART_RSA_MSR);
1154 result = mode & UART_RSA_MSR_FIFO;
1155
1156 if (!result) {
1157 serial_outp(info, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
1158 mode = serial_inp(info, UART_RSA_MSR);
1159 result = mode & UART_RSA_MSR_FIFO;
1160 }
1161
1162 restore_flags(flags);
1163 return result;
1164 }
1165
1166 /* Attempts to turn off the RSA FIFO. Returns zero on failure */
1167 static int disable_rsa(struct async_struct *info)
1168 {
1169 unsigned char mode;
1170 int result;
1171 unsigned long flags;
1172
1173 save_flags(flags); cli();
1174 mode = serial_inp(info, UART_RSA_MSR);
1175 result = !(mode & UART_RSA_MSR_FIFO);
1176
1177 if (!result) {
1178 serial_outp(info, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
1179 mode = serial_inp(info, UART_RSA_MSR);
1180 result = !(mode & UART_RSA_MSR_FIFO);
1181 }
1182
1183 restore_flags(flags);
1184 return result;
1185 }
1186 #endif /* CONFIG_SERIAL_RSA */
1187
1188 static int startup(struct async_struct * info)
1189 {
1190 unsigned long flags;
1191 int retval=0;
1192 void (*handler)(int, void *, struct pt_regs *);
1193 struct serial_state *state= info->state;
1194 unsigned long page;
1195 #ifdef CONFIG_SERIAL_MANY_PORTS
1196 unsigned short ICP;
1197 #endif
1198
1199 page = get_zeroed_page(GFP_KERNEL);
1200 if (!page)
1201 return -ENOMEM;
1202
1203 save_flags(flags); cli();
1204
1205 if (info->flags & ASYNC_INITIALIZED) {
1206 free_page(page);
1207 goto errout;
1208 }
1209
1210 if (!CONFIGURED_SERIAL_PORT(state) || !state->type) {
1211 if (info->tty)
1212 set_bit(TTY_IO_ERROR, &info->tty->flags);
1213 free_page(page);
1214 goto errout;
1215 }
1216 if (info->xmit.buf)
1217 free_page(page);
1218 else
1219 info->xmit.buf = (unsigned char *) page;
1220
1221 #ifdef SERIAL_DEBUG_OPEN
1222 printk("starting up ttys%d (irq %d)...", info->line, state->irq);
1223 #endif
1224
1225 if (uart_config[state->type].flags & UART_STARTECH) {
1226 /* Wake up UART */
1227 serial_outp(info, UART_LCR, 0xBF);
1228 serial_outp(info, UART_EFR, UART_EFR_ECB);
1229 /*
1230 * Turn off LCR == 0xBF so we actually set the IER
1231 * register on the XR16C850
1232 */
1233 serial_outp(info, UART_LCR, 0);
1234 serial_outp(info, UART_IER, 0);
1235 /*
1236 * Now reset LCR so we can turn off the ECB bit
1237 */
1238 serial_outp(info, UART_LCR, 0xBF);
1239 serial_outp(info, UART_EFR, 0);
1240 /*
1241 * For a XR16C850, we need to set the trigger levels
1242 */
1243 if (state->type == PORT_16850) {
1244 serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
1245 UART_FCTR_RX);
1246 serial_outp(info, UART_TRG, UART_TRG_96);
1247 serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
1248 UART_FCTR_TX);
1249 serial_outp(info, UART_TRG, UART_TRG_96);
1250 }
1251 serial_outp(info, UART_LCR, 0);
1252 }
1253
1254 if (state->type == PORT_16750) {
1255 /* Wake up UART */
1256 serial_outp(info, UART_IER, 0);
1257 }
1258
1259 if (state->type == PORT_16C950) {
1260 /* Wake up and initialize UART */
1261 info->ACR = 0;
1262 serial_outp(info, UART_LCR, 0xBF);
1263 serial_outp(info, UART_EFR, UART_EFR_ECB);
1264 serial_outp(info, UART_IER, 0);
1265 serial_outp(info, UART_LCR, 0);
1266 serial_icr_write(info, UART_CSR, 0); /* Reset the UART */
1267 serial_outp(info, UART_LCR, 0xBF);
1268 serial_outp(info, UART_EFR, UART_EFR_ECB);
1269 serial_outp(info, UART_LCR, 0);
1270 }
1271
1272 #ifdef CONFIG_SERIAL_RSA
1273 /*
1274 * If this is an RSA port, see if we can kick it up to the
1275 * higher speed clock.
1276 */
1277 if (state->type == PORT_RSA) {
1278 if (state->baud_base != SERIAL_RSA_BAUD_BASE &&
1279 enable_rsa(info))
1280 state->baud_base = SERIAL_RSA_BAUD_BASE;
1281 if (state->baud_base == SERIAL_RSA_BAUD_BASE)
1282 serial_outp(info, UART_RSA_FRR, 0);
1283 }
1284 #endif
1285
1286 /*
1287 * Clear the FIFO buffers and disable them
1288 * (they will be reenabled in change_speed())
1289 */
1290 if (uart_config[state->type].flags & UART_CLEAR_FIFO) {
1291 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
1292 serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
1293 UART_FCR_CLEAR_RCVR |
1294 UART_FCR_CLEAR_XMIT));
1295 serial_outp(info, UART_FCR, 0);
1296 }
1297
1298 /*
1299 * Clear the interrupt registers.
1300 */
1301 (void) serial_inp(info, UART_LSR);
1302 (void) serial_inp(info, UART_RX);
1303 (void) serial_inp(info, UART_IIR);
1304 (void) serial_inp(info, UART_MSR);
1305
1306 /*
1307 * At this point there's no way the LSR could still be 0xFF;
1308 * if it is, then bail out, because there's likely no UART
1309 * here.
1310 */
1311 if (!(info->flags & ASYNC_BUGGY_UART) &&
1312 (serial_inp(info, UART_LSR) == 0xff)) {
1313 printk("LSR safety check engaged!\n");
1314 if (capable(CAP_SYS_ADMIN)) {
1315 if (info->tty)
1316 set_bit(TTY_IO_ERROR, &info->tty->flags);
1317 } else
1318 retval = -ENODEV;
1319 goto errout;
1320 }
1321
1322 /*
1323 * Allocate the IRQ if necessary
1324 */
1325 if (state->irq && (!IRQ_ports[state->irq] ||
1326 !IRQ_ports[state->irq]->next_port)) {
1327 if (IRQ_ports[state->irq]) {
1328 #ifdef CONFIG_SERIAL_SHARE_IRQ
1329 free_irq(state->irq, &IRQ_ports[state->irq]);
1330 #ifdef CONFIG_SERIAL_MULTIPORT
1331 if (rs_multiport[state->irq].port1)
1332 handler = rs_interrupt_multi;
1333 else
1334 #endif
1335 handler = rs_interrupt;
1336 #else
1337 retval = -EBUSY;
1338 goto errout;
1339 #endif /* CONFIG_SERIAL_SHARE_IRQ */
1340 } else
1341 handler = rs_interrupt_single;
1342
1343 retval = request_irq(state->irq, handler, SA_SHIRQ,
1344 "serial", &IRQ_ports[state->irq]);
1345 if (retval) {
1346 if (capable(CAP_SYS_ADMIN)) {
1347 if (info->tty)
1348 set_bit(TTY_IO_ERROR,
1349 &info->tty->flags);
1350 retval = 0;
1351 }
1352 goto errout;
1353 }
1354 }
1355
1356 /*
1357 * Insert serial port into IRQ chain.
1358 */
1359 info->prev_port = 0;
1360 info->next_port = IRQ_ports[state->irq];
1361 if (info->next_port)
1362 info->next_port->prev_port = info;
1363 IRQ_ports[state->irq] = info;
1364 figure_IRQ_timeout(state->irq);
1365
1366 /*
1367 * Now, initialize the UART
1368 */
1369 serial_outp(info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
1370
1371 info->MCR = 0;
1372 if (info->tty->termios->c_cflag & CBAUD)
1373 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
1374 #ifdef CONFIG_SERIAL_MANY_PORTS
1375 if (info->flags & ASYNC_FOURPORT) {
1376 if (state->irq == 0)
1377 info->MCR |= UART_MCR_OUT1;
1378 } else
1379 #endif
1380 {
1381 if (state->irq != 0)
1382 info->MCR |= UART_MCR_OUT2;
1383 }
1384 info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
1385 serial_outp(info, UART_MCR, info->MCR);
1386
1387 /*
1388 * Finally, enable interrupts
1389 */
1390 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
1391 serial_outp(info, UART_IER, info->IER); /* enable interrupts */
1392
1393 #ifdef CONFIG_SERIAL_MANY_PORTS
1394 if (info->flags & ASYNC_FOURPORT) {
1395 /* Enable interrupts on the AST Fourport board */
1396 ICP = (info->port & 0xFE0) | 0x01F;
1397 outb_p(0x80, ICP);
1398 (void) inb_p(ICP);
1399 }
1400 #endif
1401
1402 /*
1403 * And clear the interrupt registers again for luck.
1404 */
1405 (void)serial_inp(info, UART_LSR);
1406 (void)serial_inp(info, UART_RX);
1407 (void)serial_inp(info, UART_IIR);
1408 (void)serial_inp(info, UART_MSR);
1409
1410 if (info->tty)
1411 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1412 info->xmit.head = info->xmit.tail = 0;
1413
1414 /*
1415 * Set up serial timers...
1416 */
1417 mod_timer(&serial_timer, jiffies + 2*HZ/100);
1418
1419 /*
1420 * Set up the tty->alt_speed kludge
1421 */
1422 #if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
1423 if (info->tty) {
1424 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1425 info->tty->alt_speed = 57600;
1426 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1427 info->tty->alt_speed = 115200;
1428 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1429 info->tty->alt_speed = 230400;
1430 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1431 info->tty->alt_speed = 460800;
1432 }
1433 #endif
1434
1435 /*
1436 * and set the speed of the serial port
1437 */
1438 change_speed(info, 0);
1439
1440 info->flags |= ASYNC_INITIALIZED;
1441 restore_flags(flags);
1442 return 0;
1443
1444 errout:
1445 restore_flags(flags);
1446 return retval;
1447 }
1448
1449 /*
1450 * This routine will shutdown a serial port; interrupts are disabled, and
1451 * DTR is dropped if the hangup on close termio flag is on.
1452 */
1453 static void shutdown(struct async_struct * info)
1454 {
1455 unsigned long flags;
1456 struct serial_state *state;
1457 int retval;
1458
1459 if (!(info->flags & ASYNC_INITIALIZED))
1460 return;
1461
1462 state = info->state;
1463
1464 #ifdef SERIAL_DEBUG_OPEN
1465 printk("Shutting down serial port %d (irq %d)....", info->line,
1466 state->irq);
1467 #endif
1468
1469 save_flags(flags); cli(); /* Disable interrupts */
1470
1471 /*
1472 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
1473 * here so the queue might never be waken up
1474 */
1475 wake_up_interruptible(&info->delta_msr_wait);
1476
1477 /*
1478 * First unlink the serial port from the IRQ chain...
1479 */
1480 if (info->next_port)
1481 info->next_port->prev_port = info->prev_port;
1482 if (info->prev_port)
1483 info->prev_port->next_port = info->next_port;
1484 else
1485 IRQ_ports[state->irq] = info->next_port;
1486 figure_IRQ_timeout(state->irq);
1487
1488 /*
1489 * Free the IRQ, if necessary
1490 */
1491 if (state->irq && (!IRQ_ports[state->irq] ||
1492 !IRQ_ports[state->irq]->next_port)) {
1493 if (IRQ_ports[state->irq]) {
1494 free_irq(state->irq, &IRQ_ports[state->irq]);
1495 retval = request_irq(state->irq, rs_interrupt_single,
1496 SA_SHIRQ, "serial",
1497 &IRQ_ports[state->irq]);
1498
1499 if (retval)
1500 printk("serial shutdown: request_irq: error %d"
1501 " Couldn't reacquire IRQ.\n", retval);
1502 } else
1503 free_irq(state->irq, &IRQ_ports[state->irq]);
1504 }
1505
1506 if (info->xmit.buf) {
1507 unsigned long pg = (unsigned long) info->xmit.buf;
1508 info->xmit.buf = 0;
1509 free_page(pg);
1510 }
1511
1512 info->IER = 0;
1513 serial_outp(info, UART_IER, 0x00); /* disable all intrs */
1514 #ifdef CONFIG_SERIAL_MANY_PORTS
1515 if (info->flags & ASYNC_FOURPORT) {
1516 /* reset interrupts on the AST Fourport board */
1517 (void) inb((info->port & 0xFE0) | 0x01F);
1518 info->MCR |= UART_MCR_OUT1;
1519 } else
1520 #endif
1521 info->MCR &= ~UART_MCR_OUT2;
1522 info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
1523
1524 /* disable break condition */
1525 serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
1526
1527 if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
1528 info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
1529 serial_outp(info, UART_MCR, info->MCR);
1530
1531 /* disable FIFO's */
1532 serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
1533 UART_FCR_CLEAR_RCVR |
1534 UART_FCR_CLEAR_XMIT));
1535 serial_outp(info, UART_FCR, 0);
1536
1537 #ifdef CONFIG_SERIAL_RSA
1538 /*
1539 * Reset the RSA board back to 115kbps compat mode.
1540 */
1541 if ((state->type == PORT_RSA) &&
1542 (state->baud_base == SERIAL_RSA_BAUD_BASE &&
1543 disable_rsa(info)))
1544 state->baud_base = SERIAL_RSA_BAUD_BASE_LO;
1545 #endif
1546
1547
1548 (void)serial_in(info, UART_RX); /* read data port to reset things */
1549
1550 if (info->tty)
1551 set_bit(TTY_IO_ERROR, &info->tty->flags);
1552
1553 if (uart_config[info->state->type].flags & UART_STARTECH) {
1554 /* Arrange to enter sleep mode */
1555 serial_outp(info, UART_LCR, 0xBF);
1556 serial_outp(info, UART_EFR, UART_EFR_ECB);
1557 serial_outp(info, UART_IER, UART_IERX_SLEEP);
1558 serial_outp(info, UART_LCR, 0);
1559 }
1560 if (info->state->type == PORT_16750) {
1561 /* Arrange to enter sleep mode */
1562 serial_outp(info, UART_IER, UART_IERX_SLEEP);
1563 }
1564 info->flags &= ~ASYNC_INITIALIZED;
1565 restore_flags(flags);
1566 }
1567
1568 #if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
1569 static int baud_table[] = {
1570 0, 50, 75, 110, 134, 150, 200, 300,
1571 600, 1200, 1800, 2400, 4800, 9600, 19200,
1572 38400, 57600, 115200, 230400, 460800, 0 };
1573
1574 static int tty_get_baud_rate(struct tty_struct *tty)
1575 {
1576 struct async_struct * info = (struct async_struct *)tty->driver_data;
1577 unsigned int cflag, i;
1578
1579 cflag = tty->termios->c_cflag;
1580
1581 i = cflag & CBAUD;
1582 if (i & CBAUDEX) {
1583 i &= ~CBAUDEX;
1584 if (i < 1 || i > 2)
1585 tty->termios->c_cflag &= ~CBAUDEX;
1586 else
1587 i += 15;
1588 }
1589 if (i == 15) {
1590 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1591 i += 1;
1592 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1593 i += 2;
1594 }
1595 return baud_table[i];
1596 }
1597 #endif
1598
1599 /*
1600 * This routine is called to set the UART divisor registers to match
1601 * the specified baud rate for a serial port.
1602 */
1603 static void change_speed(struct async_struct *info,
1604 struct termios *old_termios)
1605 {
1606 int quot = 0, baud_base, baud;
1607 unsigned cflag, cval, fcr = 0;
1608 int bits;
1609 unsigned long flags;
1610
1611 if (!info->tty || !info->tty->termios)
1612 return;
1613 cflag = info->tty->termios->c_cflag;
1614 if (!CONFIGURED_SERIAL_PORT(info))
1615 return;
1616
1617 /* byte size and parity */
1618 switch (cflag & CSIZE) {
1619 case CS5: cval = 0x00; bits = 7; break;
1620 case CS6: cval = 0x01; bits = 8; break;
1621 case CS7: cval = 0x02; bits = 9; break;
1622 case CS8: cval = 0x03; bits = 10; break;
1623 /* Never happens, but GCC is too dumb to figure it out */
1624 default: cval = 0x00; bits = 7; break;
1625 }
1626 if (cflag & CSTOPB) {
1627 cval |= 0x04;
1628 bits++;
1629 }
1630 if (cflag & PARENB) {
1631 cval |= UART_LCR_PARITY;
1632 bits++;
1633 }
1634 if (!(cflag & PARODD))
1635 cval |= UART_LCR_EPAR;
1636 #ifdef CMSPAR
1637 if (cflag & CMSPAR)
1638 cval |= UART_LCR_SPAR;
1639 #endif
1640
1641 /* Determine divisor based on baud rate */
1642 baud = tty_get_baud_rate(info->tty);
1643 if (!baud)
1644 baud = 9600; /* B0 transition handled in rs_set_termios */
1645 #ifdef CONFIG_SERIAL_RSA
1646 if ((info->state->type == PORT_RSA) &&
1647 (info->state->baud_base != SERIAL_RSA_BAUD_BASE) &&
1648 enable_rsa(info))
1649 info->state->baud_base = SERIAL_RSA_BAUD_BASE;
1650 #endif
1651 baud_base = info->state->baud_base;
1652 if (info->state->type == PORT_16C950) {
1653 if (baud <= baud_base)
1654 serial_icr_write(info, UART_TCR, 0);
1655 else if (baud <= 2*baud_base) {
1656 serial_icr_write(info, UART_TCR, 0x8);
1657 baud_base = baud_base * 2;
1658 } else if (baud <= 4*baud_base) {
1659 serial_icr_write(info, UART_TCR, 0x4);
1660 baud_base = baud_base * 4;
1661 } else
1662 serial_icr_write(info, UART_TCR, 0);
1663 }
1664 if (baud == 38400 &&
1665 ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
1666 quot = info->state->custom_divisor;
1667 else {
1668 if (baud == 134)
1669 /* Special case since 134 is really 134.5 */
1670 quot = (2*baud_base / 269);
1671 else if (baud)
1672 quot = baud_base / baud;
1673 }
1674 /* If the quotient is zero refuse the change */
1675 if (!quot && old_termios) {
1676 info->tty->termios->c_cflag &= ~CBAUD;
1677 info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
1678 baud = tty_get_baud_rate(info->tty);
1679 if (!baud)
1680 baud = 9600;
1681 if (baud == 38400 &&
1682 ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
1683 quot = info->state->custom_divisor;
1684 else {
1685 if (baud == 134)
1686 /* Special case since 134 is really 134.5 */
1687 quot = (2*baud_base / 269);
1688 else if (baud)
1689 quot = baud_base / baud;
1690 }
1691 }
1692 /* As a last resort, if the quotient is zero, default to 9600 bps */
1693 if (!quot)
1694 quot = baud_base / 9600;
1695 /*
1696 * Work around a bug in the Oxford Semiconductor 952 rev B
1697 * chip which causes it to seriously miscalculate baud rates
1698 * when DLL is 0.
1699 */
1700 if (((quot & 0xFF) == 0) && (info->state->type == PORT_16C950) &&
1701 (info->state->revision == 0x5201))
1702 quot++;
1703
1704 info->quot = quot;
1705 info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
1706 info->timeout += HZ/50; /* Add .02 seconds of slop */
1707
1708 /* Set up FIFO's */
1709 if (uart_config[info->state->type].flags & UART_USE_FIFO) {
1710 if ((info->state->baud_base / quot) < 2400)
1711 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
1712 #ifdef CONFIG_SERIAL_RSA
1713 else if (info->state->type == PORT_RSA)
1714 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
1715 #endif
1716 else
1717 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
1718 }
1719 if (info->state->type == PORT_16750)
1720 fcr |= UART_FCR7_64BYTE;
1721
1722 /* CTS flow control flag and modem status interrupts */
1723 info->IER &= ~UART_IER_MSI;
1724 if (info->flags & ASYNC_HARDPPS_CD)
1725 info->IER |= UART_IER_MSI;
1726 if (cflag & CRTSCTS) {
1727 info->flags |= ASYNC_CTS_FLOW;
1728 info->IER |= UART_IER_MSI;
1729 } else
1730 info->flags &= ~ASYNC_CTS_FLOW;
1731 if (cflag & CLOCAL)
1732 info->flags &= ~ASYNC_CHECK_CD;
1733 else {
1734 info->flags |= ASYNC_CHECK_CD;
1735 info->IER |= UART_IER_MSI;
1736 }
1737 serial_out(info, UART_IER, info->IER);
1738
1739 /*
1740 * Set up parity check flag
1741 */
1742 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
1743
1744 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
1745 if (I_INPCK(info->tty))
1746 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
1747 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
1748 info->read_status_mask |= UART_LSR_BI;
1749
1750 /*
1751 * Characters to ignore
1752 */
1753 info->ignore_status_mask = 0;
1754 if (I_IGNPAR(info->tty))
1755 info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
1756 if (I_IGNBRK(info->tty)) {
1757 info->ignore_status_mask |= UART_LSR_BI;
1758 /*
1759 * If we're ignore parity and break indicators, ignore
1760 * overruns too. (For real raw support).
1761 */
1762 if (I_IGNPAR(info->tty))
1763 info->ignore_status_mask |= UART_LSR_OE;
1764 }
1765 /*
1766 * !!! ignore all characters if CREAD is not set
1767 */
1768 if ((cflag & CREAD) == 0)
1769 info->ignore_status_mask |= UART_LSR_DR;
1770 save_flags(flags); cli();
1771 if (uart_config[info->state->type].flags & UART_STARTECH) {
1772 serial_outp(info, UART_LCR, 0xBF);
1773 serial_outp(info, UART_EFR,
1774 (cflag & CRTSCTS) ? UART_EFR_CTS : 0);
1775 }
1776 serial_outp(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
1777 serial_outp(info, UART_DLL, quot & 0xff); /* LS of divisor */
1778 serial_outp(info, UART_DLM, quot >> 8); /* MS of divisor */
1779 if (info->state->type == PORT_16750)
1780 serial_outp(info, UART_FCR, fcr); /* set fcr */
1781 serial_outp(info, UART_LCR, cval); /* reset DLAB */
1782 info->LCR = cval; /* Save LCR */
1783 if (info->state->type != PORT_16750) {
1784 if (fcr & UART_FCR_ENABLE_FIFO) {
1785 /* emulated UARTs (Lucent Venus 167x) need two steps */
1786 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
1787 }
1788 serial_outp(info, UART_FCR, fcr); /* set fcr */
1789 }
1790 restore_flags(flags);
1791 }
1792
1793 static void rs_put_char(struct tty_struct *tty, unsigned char ch)
1794 {
1795 struct async_struct *info = (struct async_struct *)tty->driver_data;
1796 unsigned long flags;
1797
1798 if (serial_paranoia_check(info, tty->device, "rs_put_char"))
1799 return;
1800
1801 if (!tty || !info->xmit.buf)
1802 return;
1803
1804 save_flags(flags); cli();
1805 if (CIRC_SPACE(info->xmit.head,
1806 info->xmit.tail,
1807 SERIAL_XMIT_SIZE) == 0) {
1808 restore_flags(flags);
1809 return;
1810 }
1811
1812 info->xmit.buf[info->xmit.head] = ch;
1813 info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
1814 restore_flags(flags);
1815 }
1816
1817 static void rs_flush_chars(struct tty_struct *tty)
1818 {
1819 struct async_struct *info = (struct async_struct *)tty->driver_data;
1820 unsigned long flags;
1821
1822 if (serial_paranoia_check(info, tty->device, "rs_flush_chars"))
1823 return;
1824
1825 if (info->xmit.head == info->xmit.tail
1826 || tty->stopped
1827 || tty->hw_stopped
1828 || !info->xmit.buf)
1829 return;
1830
1831 save_flags(flags); cli();
1832 info->IER |= UART_IER_THRI;
1833 serial_out(info, UART_IER, info->IER);
1834 restore_flags(flags);
1835 }
1836
1837 static int rs_write(struct tty_struct * tty, int from_user,
1838 const unsigned char *buf, int count)
1839 {
1840 int c, ret = 0;
1841 struct async_struct *info = (struct async_struct *)tty->driver_data;
1842 unsigned long flags;
1843
1844 if (serial_paranoia_check(info, tty->device, "rs_write"))
1845 return 0;
1846
1847 if (!tty || !info->xmit.buf || !tmp_buf)
1848 return 0;
1849
1850 save_flags(flags);
1851 if (from_user) {
1852 down(&tmp_buf_sem);
1853 while (1) {
1854 int c1;
1855 c = CIRC_SPACE_TO_END(info->xmit.head,
1856 info->xmit.tail,
1857 SERIAL_XMIT_SIZE);
1858 if (count < c)
1859 c = count;
1860 if (c <= 0)
1861 break;
1862
1863 c -= copy_from_user(tmp_buf, buf, c);
1864 if (!c) {
1865 if (!ret)
1866 ret = -EFAULT;
1867 break;
1868 }
1869 cli();
1870 c1 = CIRC_SPACE_TO_END(info->xmit.head,
1871 info->xmit.tail,
1872 SERIAL_XMIT_SIZE);
1873 if (c1 < c)
1874 c = c1;
1875 memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
1876 info->xmit.head = ((info->xmit.head + c) &
1877 (SERIAL_XMIT_SIZE-1));
1878 restore_flags(flags);
1879 buf += c;
1880 count -= c;
1881 ret += c;
1882 }
1883 up(&tmp_buf_sem);
1884 } else {
1885 cli();
1886 while (1) {
1887 c = CIRC_SPACE_TO_END(info->xmit.head,
1888 info->xmit.tail,
1889 SERIAL_XMIT_SIZE);
1890 if (count < c)
1891 c = count;
1892 if (c <= 0) {
1893 break;
1894 }
1895 memcpy(info->xmit.buf + info->xmit.head, buf, c);
1896 info->xmit.head = ((info->xmit.head + c) &
1897 (SERIAL_XMIT_SIZE-1));
1898 buf += c;
1899 count -= c;
1900 ret += c;
1901 }
1902 restore_flags(flags);
1903 }
1904 if (info->xmit.head != info->xmit.tail
1905 && !tty->stopped
1906 && !tty->hw_stopped
1907 && !(info->IER & UART_IER_THRI)) {
1908 info->IER |= UART_IER_THRI;
1909 serial_out(info, UART_IER, info->IER);
1910 }
1911 return ret;
1912 }
1913
1914 static int rs_write_room(struct tty_struct *tty)
1915 {
1916 struct async_struct *info = (struct async_struct *)tty->driver_data;
1917
1918 if (serial_paranoia_check(info, tty->device, "rs_write_room"))
1919 return 0;
1920 return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
1921 }
1922
1923 static int rs_chars_in_buffer(struct tty_struct *tty)
1924 {
1925 struct async_struct *info = (struct async_struct *)tty->driver_data;
1926
1927 if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer"))
1928 return 0;
1929 return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
1930 }
1931
1932 static void rs_flush_buffer(struct tty_struct *tty)
1933 {
1934 struct async_struct *info = (struct async_struct *)tty->driver_data;
1935 unsigned long flags;
1936
1937 if (serial_paranoia_check(info, tty->device, "rs_flush_buffer"))
1938 return;
1939 save_flags(flags); cli();
1940 info->xmit.head = info->xmit.tail = 0;
1941 restore_flags(flags);
1942 wake_up_interruptible(&tty->write_wait);
1943 #ifdef SERIAL_HAVE_POLL_WAIT
1944 wake_up_interruptible(&tty->poll_wait);
1945 #endif
1946 if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
1947 tty->ldisc.write_wakeup)
1948 (tty->ldisc.write_wakeup)(tty);
1949 }
1950
1951 /*
1952 * This function is used to send a high-priority XON/XOFF character to
1953 * the device
1954 */
1955 static void rs_send_xchar(struct tty_struct *tty, char ch)
1956 {
1957 struct async_struct *info = (struct async_struct *)tty->driver_data;
1958
1959 if (serial_paranoia_check(info, tty->device, "rs_send_char"))
1960 return;
1961
1962 info->x_char = ch;
1963 if (ch) {
1964 /* Make sure transmit interrupts are on */
1965 info->IER |= UART_IER_THRI;
1966 serial_out(info, UART_IER, info->IER);
1967 }
1968 }
1969
1970 /*
1971 * ------------------------------------------------------------
1972 * rs_throttle()
1973 *
1974 * This routine is called by the upper-layer tty layer to signal that
1975 * incoming characters should be throttled.
1976 * ------------------------------------------------------------
1977 */
1978 static void rs_throttle(struct tty_struct * tty)
1979 {
1980 struct async_struct *info = (struct async_struct *)tty->driver_data;
1981 unsigned long flags;
1982 #ifdef SERIAL_DEBUG_THROTTLE
1983 char buf[64];
1984
1985 printk("throttle %s: %d....\n", tty_name(tty, buf),
1986 tty->ldisc.chars_in_buffer(tty));
1987 #endif
1988
1989 if (serial_paranoia_check(info, tty->device, "rs_throttle"))
1990 return;
1991
1992 if (I_IXOFF(tty))
1993 rs_send_xchar(tty, STOP_CHAR(tty));
1994
1995 if (tty->termios->c_cflag & CRTSCTS)
1996 info->MCR &= ~UART_MCR_RTS;
1997
1998 save_flags(flags); cli();
1999 serial_out(info, UART_MCR, info->MCR);
2000 restore_flags(flags);
2001 }
2002
2003 static void rs_unthrottle(struct tty_struct * tty)
2004 {
2005 struct async_struct *info = (struct async_struct *)tty->driver_data;
2006 unsigned long flags;
2007 #ifdef SERIAL_DEBUG_THROTTLE
2008 char buf[64];
2009
2010 printk("unthrottle %s: %d....\n", tty_name(tty, buf),
2011 tty->ldisc.chars_in_buffer(tty));
2012 #endif
2013
2014 if (serial_paranoia_check(info, tty->device, "rs_unthrottle"))
2015 return;
2016
2017 if (I_IXOFF(tty)) {
2018 if (info->x_char)
2019 info->x_char = 0;
2020 else
2021 rs_send_xchar(tty, START_CHAR(tty));
2022 }
2023 if (tty->termios->c_cflag & CRTSCTS)
2024 info->MCR |= UART_MCR_RTS;
2025 save_flags(flags); cli();
2026 serial_out(info, UART_MCR, info->MCR);
2027 restore_flags(flags);
2028 }
2029
2030 /*
2031 * ------------------------------------------------------------
2032 * rs_ioctl() and friends
2033 * ------------------------------------------------------------
2034 */
2035
2036 static int get_serial_info(struct async_struct * info,
2037 struct serial_struct * retinfo)
2038 {
2039 struct serial_struct tmp;
2040 struct serial_state *state = info->state;
2041
2042 if (!retinfo)
2043 return -EFAULT;
2044 memset(&tmp, 0, sizeof(tmp));
2045 tmp.type = state->type;
2046 tmp.line = state->line;
2047 tmp.port = state->port;
2048 if (HIGH_BITS_OFFSET)
2049 tmp.port_high = state->port >> HIGH_BITS_OFFSET;
2050 else
2051 tmp.port_high = 0;
2052 tmp.irq = state->irq;
2053 tmp.flags = state->flags;
2054 tmp.xmit_fifo_size = state->xmit_fifo_size;
2055 tmp.baud_base = state->baud_base;
2056 tmp.close_delay = state->close_delay;
2057 tmp.closing_wait = state->closing_wait;
2058 tmp.custom_divisor = state->custom_divisor;
2059 tmp.hub6 = state->hub6;
2060 tmp.io_type = state->io_type;
2061 if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
2062 return -EFAULT;
2063 return 0;
2064 }
2065
2066 static int set_serial_info(struct async_struct * info,
2067 struct serial_struct * new_info)
2068 {
2069 struct serial_struct new_serial;
2070 struct serial_state old_state, *state;
2071 unsigned int i,change_irq,change_port;
2072 int retval = 0;
2073 unsigned long new_port;
2074
2075 if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
2076 return -EFAULT;
2077 state = info->state;
2078 old_state = *state;
2079
2080 new_port = new_serial.port;
2081 if (HIGH_BITS_OFFSET)
2082 new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
2083
2084 change_irq = new_serial.irq != state->irq;
2085 change_port = (new_port != ((int) state->port)) ||
2086 (new_serial.hub6 != state->hub6);
2087
2088 if (!capable(CAP_SYS_ADMIN)) {
2089 if (change_irq || change_port ||
2090 (new_serial.baud_base != state->baud_base) ||
2091 (new_serial.type != state->type) ||
2092 (new_serial.close_delay != state->close_delay) ||
2093 (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
2094 ((new_serial.flags & ~ASYNC_USR_MASK) !=
2095 (state->flags & ~ASYNC_USR_MASK)))
2096 return -EPERM;
2097 state->flags = ((state->flags & ~ASYNC_USR_MASK) |
2098 (new_serial.flags & ASYNC_USR_MASK));
2099 info->flags = ((info->flags & ~ASYNC_USR_MASK) |
2100 (new_serial.flags & ASYNC_USR_MASK));
2101 state->custom_divisor = new_serial.custom_divisor;
2102 goto check_and_exit;
2103 }
2104
2105 new_serial.irq = irq_cannonicalize(new_serial.irq);
2106
2107 if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
2108 (new_serial.baud_base < 9600)|| (new_serial.type < PORT_UNKNOWN) ||
2109 (new_serial.type > PORT_MAX) || (new_serial.type == PORT_CIRRUS) ||
2110 (new_serial.type == PORT_STARTECH)) {
2111 return -EINVAL;
2112 }
2113
2114 if ((new_serial.type != state->type) ||
2115 (new_serial.xmit_fifo_size <= 0))
2116 new_serial.xmit_fifo_size =
2117 uart_config[new_serial.type].dfl_xmit_fifo_size;
2118
2119 /* Make sure address is not already in use */
2120 if (new_serial.type) {
2121 for (i = 0 ; i < NR_PORTS; i++)
2122 if ((state != &rs_table[i]) &&
2123 (rs_table[i].port == new_port) &&
2124 rs_table[i].type)
2125 return -EADDRINUSE;
2126 }
2127
2128 if ((change_port || change_irq) && (state->count > 1))
2129 return -EBUSY;
2130
2131 /*
2132 * OK, past this point, all the error checking has been done.
2133 * At this point, we start making changes.....
2134 */
2135
2136 state->baud_base = new_serial.baud_base;
2137 state->flags = ((state->flags & ~ASYNC_FLAGS) |
2138 (new_serial.flags & ASYNC_FLAGS));
2139 info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
2140 (info->flags & ASYNC_INTERNAL_FLAGS));
2141 state->custom_divisor = new_serial.custom_divisor;
2142 state->close_delay = new_serial.close_delay * HZ/100;
2143 state->closing_wait = new_serial.closing_wait * HZ/100;
2144 #if (LINUX_VERSION_CODE > 0x20100)
2145 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2146 #endif
2147 info->xmit_fifo_size = state->xmit_fifo_size =
2148 new_serial.xmit_fifo_size;
2149
2150 if ((state->type != PORT_UNKNOWN) && state->port) {
2151 #ifdef CONFIG_SERIAL_RSA
2152 if (old_state.type == PORT_RSA)
2153 release_region(state->port + UART_RSA_BASE, 16);
2154 else
2155 #endif
2156 release_region(state->port,8);
2157 }
2158 state->type = new_serial.type;
2159 if (change_port || change_irq) {
2160 /*
2161 * We need to shutdown the serial port at the old
2162 * port/irq combination.
2163 */
2164 shutdown(info);
2165 state->irq = new_serial.irq;
2166 info->port = state->port = new_port;
2167 info->hub6 = state->hub6 = new_serial.hub6;
2168 if (info->hub6)
2169 info->io_type = state->io_type = SERIAL_IO_HUB6;
2170 else if (info->io_type == SERIAL_IO_HUB6)
2171 info->io_type = state->io_type = SERIAL_IO_PORT;
2172 }
2173 if ((state->type != PORT_UNKNOWN) && state->port) {
2174 #ifdef CONFIG_SERIAL_RSA
2175 if (state->type == PORT_RSA)
2176 request_region(state->port + UART_RSA_BASE,
2177 16, "serial_rsa(set)");
2178 else
2179 #endif
2180 request_region(state->port,8,"serial(set)");
2181 }
2182
2183
2184 check_and_exit:
2185 if (!state->port || !state->type)
2186 return 0;
2187 if (info->flags & ASYNC_INITIALIZED) {
2188 if (((old_state.flags & ASYNC_SPD_MASK) !=
2189 (state->flags & ASYNC_SPD_MASK)) ||
2190 (old_state.custom_divisor != state->custom_divisor)) {
2191 #if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
2192 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
2193 info->tty->alt_speed = 57600;
2194 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
2195 info->tty->alt_speed = 115200;
2196 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
2197 info->tty->alt_speed = 230400;
2198 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
2199 info->tty->alt_speed = 460800;
2200 #endif
2201 change_speed(info, 0);
2202 }
2203 } else
2204 retval = startup(info);
2205 return retval;
2206 }
2207
2208
2209 /*
2210 * get_lsr_info - get line status register info
2211 *
2212 * Purpose: Let user call ioctl() to get info when the UART physically
2213 * is emptied. On bus types like RS485, the transmitter must
2214 * release the bus after transmitting. This must be done when
2215 * the transmit shift register is empty, not be done when the
2216 * transmit holding register is empty. This functionality
2217 * allows an RS485 driver to be written in user space.
2218 */
2219 static int get_lsr_info(struct async_struct * info, unsigned int *value)
2220 {
2221 unsigned char status;
2222 unsigned int result;
2223 unsigned long flags;
2224
2225 save_flags(flags); cli();
2226 status = serial_in(info, UART_LSR);
2227 restore_flags(flags);
2228 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
2229
2230 /*
2231 * If we're about to load something into the transmit
2232 * register, we'll pretend the transmitter isn't empty to
2233 * avoid a race condition (depending on when the transmit
2234 * interrupt happens).
2235 */
2236 if (info->x_char ||
2237 ((CIRC_CNT(info->xmit.head, info->xmit.tail,
2238 SERIAL_XMIT_SIZE) > 0) &&
2239 !info->tty->stopped && !info->tty->hw_stopped))
2240 result &= TIOCSER_TEMT;
2241
2242 if (copy_to_user(value, &result, sizeof(int)))
2243 return -EFAULT;
2244 return 0;
2245 }
2246
2247
2248 static int get_modem_info(struct async_struct * info, unsigned int *value)
2249 {
2250 unsigned char control, status;
2251 unsigned int result;
2252 unsigned long flags;
2253
2254 control = info->MCR;
2255 save_flags(flags); cli();
2256 status = serial_in(info, UART_MSR);
2257 restore_flags(flags);
2258 result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
2259 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
2260 #ifdef TIOCM_OUT1
2261 | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
2262 | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
2263 #endif
2264 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
2265 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
2266 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
2267 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
2268
2269 if (copy_to_user(value, &result, sizeof(int)))
2270 return -EFAULT;
2271 return 0;
2272 }
2273
2274 static int set_modem_info(struct async_struct * info, unsigned int cmd,
2275 unsigned int *value)
2276 {
2277 unsigned int arg;
2278 unsigned long flags;
2279
2280 if (copy_from_user(&arg, value, sizeof(int)))
2281 return -EFAULT;
2282
2283 switch (cmd) {
2284 case TIOCMBIS:
2285 if (arg & TIOCM_RTS)
2286 info->MCR |= UART_MCR_RTS;
2287 if (arg & TIOCM_DTR)
2288 info->MCR |= UART_MCR_DTR;
2289 #ifdef TIOCM_OUT1
2290 if (arg & TIOCM_OUT1)
2291 info->MCR |= UART_MCR_OUT1;
2292 if (arg & TIOCM_OUT2)
2293 info->MCR |= UART_MCR_OUT2;
2294 #endif
2295 if (arg & TIOCM_LOOP)
2296 info->MCR |= UART_MCR_LOOP;
2297 break;
2298 case TIOCMBIC:
2299 if (arg & TIOCM_RTS)
2300 info->MCR &= ~UART_MCR_RTS;
2301 if (arg & TIOCM_DTR)
2302 info->MCR &= ~UART_MCR_DTR;
2303 #ifdef TIOCM_OUT1
2304 if (arg & TIOCM_OUT1)
2305 info->MCR &= ~UART_MCR_OUT1;
2306 if (arg & TIOCM_OUT2)
2307 info->MCR &= ~UART_MCR_OUT2;
2308 #endif
2309 if (arg & TIOCM_LOOP)
2310 info->MCR &= ~UART_MCR_LOOP;
2311 break;
2312 case TIOCMSET:
2313 info->MCR = ((info->MCR & ~(UART_MCR_RTS |
2314 #ifdef TIOCM_OUT1
2315 UART_MCR_OUT1 |
2316 UART_MCR_OUT2 |
2317 #endif
2318 UART_MCR_LOOP |
2319 UART_MCR_DTR))
2320 | ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0)
2321 #ifdef TIOCM_OUT1
2322 | ((arg & TIOCM_OUT1) ? UART_MCR_OUT1 : 0)
2323 | ((arg & TIOCM_OUT2) ? UART_MCR_OUT2 : 0)
2324 #endif
2325 | ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0)
2326 | ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0));
2327 break;
2328 default:
2329 return -EINVAL;
2330 }
2331 save_flags(flags); cli();
2332 info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
2333 serial_out(info, UART_MCR, info->MCR);
2334 restore_flags(flags);
2335 return 0;
2336 }
2337
2338 static int do_autoconfig(struct async_struct * info)
2339 {
2340 int irq, retval;
2341
2342 if (!capable(CAP_SYS_ADMIN))
2343 return -EPERM;
2344
2345 if (info->state->count > 1)
2346 return -EBUSY;
2347
2348 shutdown(info);
2349
2350 autoconfig(info->state);
2351 if ((info->state->flags & ASYNC_AUTO_IRQ) &&
2352 (info->state->port != 0) &&
2353 (info->state->type != PORT_UNKNOWN)) {
2354 irq = detect_uart_irq(info->state);
2355 if (irq > 0)
2356 info->state->irq = irq;
2357 }
2358
2359 retval = startup(info);
2360 if (retval)
2361 return retval;
2362 return 0;
2363 }
2364
2365 /*
2366 * rs_break() --- routine which turns the break handling on or off
2367 */
2368 #if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
2369 static void send_break( struct async_struct * info, int duration)
2370 {
2371 if (!CONFIGURED_SERIAL_PORT(info))
2372 return;
2373 current->state = TASK_INTERRUPTIBLE;
2374 current->timeout = jiffies + duration;
2375 cli();
2376 info->LCR |= UART_LCR_SBC;
2377 serial_out(info, UART_LCR, info->LCR);
2378 schedule();
2379 info->LCR &= ~UART_LCR_SBC;
2380 serial_out(info, UART_LCR, info->LCR);
2381 sti();
2382 }
2383 #else
2384 static void rs_break(struct tty_struct *tty, int break_state)
2385 {
2386 struct async_struct * info = (struct async_struct *)tty->driver_data;
2387 unsigned long flags;
2388
2389 if (serial_paranoia_check(info, tty->device, "rs_break"))
2390 return;
2391
2392 if (!CONFIGURED_SERIAL_PORT(info))
2393 return;
2394 save_flags(flags); cli();
2395 if (break_state == -1)
2396 info->LCR |= UART_LCR_SBC;
2397 else
2398 info->LCR &= ~UART_LCR_SBC;
2399 serial_out(info, UART_LCR, info->LCR);
2400 restore_flags(flags);
2401 }
2402 #endif
2403
2404 #ifdef CONFIG_SERIAL_MULTIPORT
2405 static int get_multiport_struct(struct async_struct * info,
2406 struct serial_multiport_struct *retinfo)
2407 {
2408 struct serial_multiport_struct ret;
2409 struct rs_multiport_struct *multi;
2410
2411 multi = &rs_multiport[info->state->irq];
2412
2413 ret.port_monitor = multi->port_monitor;
2414
2415 ret.port1 = multi->port1;
2416 ret.mask1 = multi->mask1;
2417 ret.match1 = multi->match1;
2418
2419 ret.port2 = multi->port2;
2420 ret.mask2 = multi->mask2;
2421 ret.match2 = multi->match2;
2422
2423 ret.port3 = multi->port3;
2424 ret.mask3 = multi->mask3;
2425 ret.match3 = multi->match3;
2426
2427 ret.port4 = multi->port4;
2428 ret.mask4 = multi->mask4;
2429 ret.match4 = multi->match4;
2430
2431 ret.irq = info->state->irq;
2432
2433 if (copy_to_user(retinfo,&ret,sizeof(*retinfo)))
2434 return -EFAULT;
2435 return 0;
2436 }
2437
2438 static int set_multiport_struct(struct async_struct * info,
2439 struct serial_multiport_struct *in_multi)
2440 {
2441 struct serial_multiport_struct new_multi;
2442 struct rs_multiport_struct *multi;
2443 struct serial_state *state;
2444 int was_multi, now_multi;
2445 int retval;
2446 void (*handler)(int, void *, struct pt_regs *);
2447
2448 if (!capable(CAP_SYS_ADMIN))
2449 return -EPERM;
2450 state = info->state;
2451
2452 if (copy_from_user(&new_multi, in_multi,
2453 sizeof(struct serial_multiport_struct)))
2454 return -EFAULT;
2455
2456 if (new_multi.irq != state->irq || state->irq == 0 ||
2457 !IRQ_ports[state->irq])
2458 return -EINVAL;
2459
2460 multi = &rs_multiport[state->irq];
2461 was_multi = (multi->port1 != 0);
2462
2463 multi->port_monitor = new_multi.port_monitor;
2464
2465 if (multi->port1)
2466 release_region(multi->port1,1);
2467 multi->port1 = new_multi.port1;
2468 multi->mask1 = new_multi.mask1;
2469 multi->match1 = new_multi.match1;
2470 if (multi->port1)
2471 request_region(multi->port1,1,"serial(multiport1)");
2472
2473 if (multi->port2)
2474 release_region(multi->port2,1);
2475 multi->port2 = new_multi.port2;
2476 multi->mask2 = new_multi.mask2;
2477 multi->match2 = new_multi.match2;
2478 if (multi->port2)
2479 request_region(multi->port2,1,"serial(multiport2)");
2480
2481 if (multi->port3)
2482 release_region(multi->port3,1);
2483 multi->port3 = new_multi.port3;
2484 multi->mask3 = new_multi.mask3;
2485 multi->match3 = new_multi.match3;
2486 if (multi->port3)
2487 request_region(multi->port3,1,"serial(multiport3)");
2488
2489 if (multi->port4)
2490 release_region(multi->port4,1);
2491 multi->port4 = new_multi.port4;
2492 multi->mask4 = new_multi.mask4;
2493 multi->match4 = new_multi.match4;
2494 if (multi->port4)
2495 request_region(multi->port4,1,"serial(multiport4)");
2496
2497 now_multi = (multi->port1 != 0);
2498
2499 if (IRQ_ports[state->irq]->next_port &&
2500 (was_multi != now_multi)) {
2501 free_irq(state->irq, &IRQ_ports[state->irq]);
2502 if (now_multi)
2503 handler = rs_interrupt_multi;
2504 else
2505 handler = rs_interrupt;
2506
2507 retval = request_irq(state->irq, handler, SA_SHIRQ,
2508 "serial", &IRQ_ports[state->irq]);
2509 if (retval) {
2510 printk("Couldn't reallocate serial interrupt "
2511 "driver!!\n");
2512 }
2513 }
2514 return 0;
2515 }
2516 #endif
2517
2518 static int rs_ioctl(struct tty_struct *tty, struct file * file,
2519 unsigned int cmd, unsigned long arg)
2520 {
2521 struct async_struct * info = (struct async_struct *)tty->driver_data;
2522 struct async_icount cprev, cnow; /* kernel counter temps */
2523 struct serial_icounter_struct icount;
2524 unsigned long flags;
2525 #if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
2526 int retval, tmp;
2527 #endif
2528
2529 if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
2530 return -ENODEV;
2531
2532 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2533 (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
2534 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2535 if (tty->flags & (1 << TTY_IO_ERROR))
2536 return -EIO;
2537 }
2538
2539 switch (cmd) {
2540 #if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
2541 case TCSBRK: /* SVID version: non-zero arg --> no break */
2542 retval = tty_check_change(tty);
2543 if (retval)
2544 return retval;
2545 tty_wait_until_sent(tty, 0);
2546 if (signal_pending(current))
2547 return -EINTR;
2548 if (!arg) {
2549 send_break(info, HZ/4); /* 1/4 second */
2550 if (signal_pending(current))
2551 return -EINTR;
2552 }
2553 return 0;
2554 case TCSBRKP: /* support for POSIX tcsendbreak() */
2555 retval = tty_check_change(tty);
2556 if (retval)
2557 return retval;
2558 tty_wait_until_sent(tty, 0);
2559 if (signal_pending(current))
2560 return -EINTR;
2561 send_break(info, arg ? arg*(HZ/10) : HZ/4);
2562 if (signal_pending(current))
2563 return -EINTR;
2564 return 0;
2565 case TIOCGSOFTCAR:
2566 tmp = C_CLOCAL(tty) ? 1 : 0;
2567 if (copy_to_user((void *)arg, &tmp, sizeof(int)))
2568 return -EFAULT;
2569 return 0;
2570 case TIOCSSOFTCAR:
2571 if (copy_from_user(&tmp, (void *)arg, sizeof(int)))
2572 return -EFAULT;
2573
2574 tty->termios->c_cflag =
2575 ((tty->termios->c_cflag & ~CLOCAL) |
2576 (tmp ? CLOCAL : 0));
2577 return 0;
2578 #endif
2579 case TIOCMGET:
2580 return get_modem_info(info, (unsigned int *) arg);
2581 case TIOCMBIS:
2582 case TIOCMBIC:
2583 case TIOCMSET:
2584 return set_modem_info(info, cmd, (unsigned int *) arg);
2585 case TIOCGSERIAL:
2586 return get_serial_info(info,
2587 (struct serial_struct *) arg);
2588 case TIOCSSERIAL:
2589 return set_serial_info(info,
2590 (struct serial_struct *) arg);
2591 case TIOCSERCONFIG:
2592 return do_autoconfig(info);
2593
2594 case TIOCSERGETLSR: /* Get line status register */
2595 return get_lsr_info(info, (unsigned int *) arg);
2596
2597 case TIOCSERGSTRUCT:
2598 if (copy_to_user((struct async_struct *) arg,
2599 info, sizeof(struct async_struct)))
2600 return -EFAULT;
2601 return 0;
2602
2603 #ifdef CONFIG_SERIAL_MULTIPORT
2604 case TIOCSERGETMULTI:
2605 return get_multiport_struct(info,
2606 (struct serial_multiport_struct *) arg);
2607 case TIOCSERSETMULTI:
2608 return set_multiport_struct(info,
2609 (struct serial_multiport_struct *) arg);
2610 #endif
2611
2612 /*
2613 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
2614 * - mask passed in arg for lines of interest
2615 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
2616 * Caller should use TIOCGICOUNT to see which one it was
2617 */
2618 case TIOCMIWAIT:
2619 save_flags(flags); cli();
2620 /* note the counters on entry */
2621 cprev = info->state->icount;
2622 restore_flags(flags);
2623 /* Force modem status interrupts on */
2624 info->IER |= UART_IER_MSI;
2625 serial_out(info, UART_IER, info->IER);
2626 while (1) {
2627 interruptible_sleep_on(&info->delta_msr_wait);
2628 /* see if a signal did it */
2629 if (signal_pending(current))
2630 return -ERESTARTSYS;
2631 save_flags(flags); cli();
2632 cnow = info->state->icount; /* atomic copy */
2633 restore_flags(flags);
2634 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2635 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
2636 return -EIO; /* no change => error */
2637 if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2638 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2639 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2640 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
2641 return 0;
2642 }
2643 cprev = cnow;
2644 }
2645 /* NOTREACHED */
2646
2647 /*
2648 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2649 * Return: write counters to the user passed counter struct
2650 * NB: both 1->0 and 0->1 transitions are counted except for
2651 * RI where only 0->1 is counted.
2652 */
2653 case TIOCGICOUNT:
2654 save_flags(flags); cli();
2655 cnow = info->state->icount;
2656 restore_flags(flags);
2657 icount.cts = cnow.cts;
2658 icount.dsr = cnow.dsr;
2659 icount.rng = cnow.rng;
2660 icount.dcd = cnow.dcd;
2661 icount.rx = cnow.rx;
2662 icount.tx = cnow.tx;
2663 icount.frame = cnow.frame;
2664 icount.overrun = cnow.overrun;
2665 icount.parity = cnow.parity;
2666 icount.brk = cnow.brk;
2667 icount.buf_overrun = cnow.buf_overrun;
2668
2669 if (copy_to_user((void *)arg, &icount, sizeof(icount)))
2670 return -EFAULT;
2671 return 0;
2672 case TIOCSERGWILD:
2673 case TIOCSERSWILD:
2674 /* "setserial -W" is called in Debian boot */
2675 printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
2676 return 0;
2677
2678 default:
2679 return -ENOIOCTLCMD;
2680 }
2681 return 0;
2682 }
2683
2684 static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
2685 {
2686 struct async_struct *info = (struct async_struct *)tty->driver_data;
2687 unsigned long flags;
2688 unsigned int cflag = tty->termios->c_cflag;
2689
2690 if ( (cflag == old_termios->c_cflag)
2691 && ( RELEVANT_IFLAG(tty->termios->c_iflag)
2692 == RELEVANT_IFLAG(old_termios->c_iflag)))
2693 return;
2694
2695 change_speed(info, old_termios);
2696
2697 /* Handle transition to B0 status */
2698 if ((old_termios->c_cflag & CBAUD) &&
2699 !(cflag & CBAUD)) {
2700 info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
2701 save_flags(flags); cli();
2702 serial_out(info, UART_MCR, info->MCR);
2703 restore_flags(flags);
2704 }
2705
2706 /* Handle transition away from B0 status */
2707 if (!(old_termios->c_cflag & CBAUD) &&
2708 (cflag & CBAUD)) {
2709 info->MCR |= UART_MCR_DTR;
2710 if (!(tty->termios->c_cflag & CRTSCTS) ||
2711 !test_bit(TTY_THROTTLED, &tty->flags)) {
2712 info->MCR |= UART_MCR_RTS;
2713 }
2714 save_flags(flags); cli();
2715 serial_out(info, UART_MCR, info->MCR);
2716 restore_flags(flags);
2717 }
2718
2719 /* Handle turning off CRTSCTS */
2720 if ((old_termios->c_cflag & CRTSCTS) &&
2721 !(tty->termios->c_cflag & CRTSCTS)) {
2722 tty->hw_stopped = 0;
2723 rs_start(tty);
2724 }
2725
2726 #if 0
2727 /*
2728 * No need to wake up processes in open wait, since they
2729 * sample the CLOCAL flag once, and don't recheck it.
2730 * XXX It's not clear whether the current behavior is correct
2731 * or not. Hence, this may change.....
2732 */
2733 if (!(old_termios->c_cflag & CLOCAL) &&
2734 (tty->termios->c_cflag & CLOCAL))
2735 wake_up_interruptible(&info->open_wait);
2736 #endif
2737 }
2738
2739 /*
2740 * ------------------------------------------------------------
2741 * rs_close()
2742 *
2743 * This routine is called when the serial port gets closed. First, we
2744 * wait for the last remaining data to be sent. Then, we unlink its
2745 * async structure from the interrupt chain if necessary, and we free
2746 * that IRQ if nothing is left in the chain.
2747 * ------------------------------------------------------------
2748 */
2749 static void rs_close(struct tty_struct *tty, struct file * filp)
2750 {
2751 struct async_struct * info = (struct async_struct *)tty->driver_data;
2752 struct serial_state *state;
2753 unsigned long flags;
2754
2755 if (!info || serial_paranoia_check(info, tty->device, "rs_close"))
2756 return;
2757
2758 state = info->state;
2759
2760 save_flags(flags); cli();
2761
2762 if (tty_hung_up_p(filp)) {
2763 DBG_CNT("before DEC-hung");
2764 MOD_DEC_USE_COUNT;
2765 restore_flags(flags);
2766 return;
2767 }
2768
2769 #ifdef SERIAL_DEBUG_OPEN
2770 printk("rs_close ttys%d, count = %d\n", info->line, state->count);
2771 #endif
2772 if ((tty->count == 1) && (state->count != 1)) {
2773 /*
2774 * Uh, oh. tty->count is 1, which means that the tty
2775 * structure will be freed. state->count should always
2776 * be one in these conditions. If it's greater than
2777 * one, we've got real problems, since it means the
2778 * serial port won't be shutdown.
2779 */
2780 printk("rs_close: bad serial port count; tty->count is 1, "
2781 "state->count is %d\n", state->count);
2782 state->count = 1;
2783 }
2784 if (--state->count < 0) {
2785 printk("rs_close: bad serial port count for ttys%d: %d\n",
2786 info->line, state->count);
2787 state->count = 0;
2788 }
2789 if (state->count) {
2790 DBG_CNT("before DEC-2");
2791 MOD_DEC_USE_COUNT;
2792 restore_flags(flags);
2793 return;
2794 }
2795 info->flags |= ASYNC_CLOSING;
2796 restore_flags(flags);
2797 /*
2798 * Save the termios structure, since this port may have
2799 * separate termios for callout and dialin.
2800 */
2801 if (info->flags & ASYNC_NORMAL_ACTIVE)
2802 info->state->normal_termios = *tty->termios;
2803 if (info->flags & ASYNC_CALLOUT_ACTIVE)
2804 info->state->callout_termios = *tty->termios;
2805 /*
2806 * Now we wait for the transmit buffer to clear; and we notify
2807 * the line discipline to only process XON/XOFF characters.
2808 */
2809 tty->closing = 1;
2810 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
2811 tty_wait_until_sent(tty, info->closing_wait);
2812 /*
2813 * At this point we stop accepting input. To do this, we
2814 * disable the receive line status interrupts, and tell the
2815 * interrupt driver to stop checking the data ready bit in the
2816 * line status register.
2817 */
2818 info->IER &= ~UART_IER_RLSI;
2819 info->read_status_mask &= ~UART_LSR_DR;
2820 if (info->flags & ASYNC_INITIALIZED) {
2821 serial_out(info, UART_IER, info->IER);
2822 /*
2823 * Before we drop DTR, make sure the UART transmitter
2824 * has completely drained; this is especially
2825 * important if there is a transmit FIFO!
2826 */
2827 rs_wait_until_sent(tty, info->timeout);
2828 }
2829 shutdown(info);
2830 if (tty->driver.flush_buffer)
2831 tty->driver.flush_buffer(tty);
2832 if (tty->ldisc.flush_buffer)
2833 tty->ldisc.flush_buffer(tty);
2834 tty->closing = 0;
2835 info->event = 0;
2836 info->tty = 0;
2837 if (info->blocked_open) {
2838 if (info->close_delay) {
2839 set_current_state(TASK_INTERRUPTIBLE);
2840 schedule_timeout(info->close_delay);
2841 }
2842 wake_up_interruptible(&info->open_wait);
2843 }
2844 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
2845 ASYNC_CLOSING);
2846 wake_up_interruptible(&info->close_wait);
2847 MOD_DEC_USE_COUNT;
2848 }
2849
2850 /*
2851 * rs_wait_until_sent() --- wait until the transmitter is empty
2852 */
2853 static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
2854 {
2855 struct async_struct * info = (struct async_struct *)tty->driver_data;
2856 unsigned long orig_jiffies, char_time;
2857 int lsr;
2858
2859 if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
2860 return;
2861
2862 if (info->state->type == PORT_UNKNOWN)
2863 return;
2864
2865 if (info->xmit_fifo_size == 0)
2866 return; /* Just in case.... */
2867
2868 orig_jiffies = jiffies;
2869 /*
2870 * Set the check interval to be 1/5 of the estimated time to
2871 * send a single character, and make it at least 1. The check
2872 * interval should also be less than the timeout.
2873 *
2874 * Note: we have to use pretty tight timings here to satisfy
2875 * the NIST-PCTS.
2876 */
2877 char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
2878 char_time = char_time / 5;
2879 if (char_time == 0)
2880 char_time = 1;
2881 if (timeout && timeout < char_time)
2882 char_time = timeout;
2883 /*
2884 * If the transmitter hasn't cleared in twice the approximate
2885 * amount of time to send the entire FIFO, it probably won't
2886 * ever clear. This assumes the UART isn't doing flow
2887 * control, which is currently the case. Hence, if it ever
2888 * takes longer than info->timeout, this is probably due to a
2889 * UART bug of some kind. So, we clamp the timeout parameter at
2890 * 2*info->timeout.
2891 */
2892 if (!timeout || timeout > 2*info->timeout)
2893 timeout = 2*info->timeout;
2894 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2895 printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
2896 printk("jiff=%lu...", jiffies);
2897 #endif
2898 while (!((lsr = serial_inp(info, UART_LSR)) & UART_LSR_TEMT)) {
2899 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2900 printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
2901 #endif
2902 set_current_state(TASK_INTERRUPTIBLE);
2903 schedule_timeout(char_time);
2904 if (signal_pending(current))
2905 break;
2906 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2907 break;
2908 }
2909 set_current_state(TASK_RUNNING);
2910 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2911 printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
2912 #endif
2913 }
2914
2915 /*
2916 * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
2917 */
2918 static void rs_hangup(struct tty_struct *tty)
2919 {
2920 struct async_struct * info = (struct async_struct *)tty->driver_data;
2921 struct serial_state *state = info->state;
2922
2923 if (serial_paranoia_check(info, tty->device, "rs_hangup"))
2924 return;
2925
2926 state = info->state;
2927
2928 rs_flush_buffer(tty);
2929 if (info->flags & ASYNC_CLOSING)
2930 return;
2931 shutdown(info);
2932 info->event = 0;
2933 state->count = 0;
2934 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
2935 info->tty = 0;
2936 wake_up_interruptible(&info->open_wait);
2937 }
2938
2939 /*
2940 * ------------------------------------------------------------
2941 * rs_open() and friends
2942 * ------------------------------------------------------------
2943 */
2944 static int block_til_ready(struct tty_struct *tty, struct file * filp,
2945 struct async_struct *info)
2946 {
2947 DECLARE_WAITQUEUE(wait, current);
2948 struct serial_state *state = info->state;
2949 int retval;
2950 int do_clocal = 0, extra_count = 0;
2951 unsigned long flags;
2952
2953 /*
2954 * If the device is in the middle of being closed, then block
2955 * until it's done, and then try again.
2956 */
2957 if (tty_hung_up_p(filp) ||
2958 (info->flags & ASYNC_CLOSING)) {
2959 if (info->flags & ASYNC_CLOSING)
2960 interruptible_sleep_on(&info->close_wait);
2961 #ifdef SERIAL_DO_RESTART
2962 return ((info->flags & ASYNC_HUP_NOTIFY) ?
2963 -EAGAIN : -ERESTARTSYS);
2964 #else
2965 return -EAGAIN;
2966 #endif
2967 }
2968
2969 /*
2970 * If this is a callout device, then just make sure the normal
2971 * device isn't being used.
2972 */
2973 if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
2974 if (info->flags & ASYNC_NORMAL_ACTIVE)
2975 return -EBUSY;
2976 if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
2977 (info->flags & ASYNC_SESSION_LOCKOUT) &&
2978 (info->session != current->session))
2979 return -EBUSY;
2980 if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
2981 (info->flags & ASYNC_PGRP_LOCKOUT) &&
2982 (info->pgrp != current->pgrp))
2983 return -EBUSY;
2984 info->flags |= ASYNC_CALLOUT_ACTIVE;
2985 return 0;
2986 }
2987
2988 /*
2989 * If non-blocking mode is set, or the port is not enabled,
2990 * then make the check up front and then exit.
2991 */
2992 if ((filp->f_flags & O_NONBLOCK) ||
2993 (tty->flags & (1 << TTY_IO_ERROR))) {
2994 if (info->flags & ASYNC_CALLOUT_ACTIVE)
2995 return -EBUSY;
2996 info->flags |= ASYNC_NORMAL_ACTIVE;
2997 return 0;
2998 }
2999
3000 if (info->flags & ASYNC_CALLOUT_ACTIVE) {
3001 if (state->normal_termios.c_cflag & CLOCAL)
3002 do_clocal = 1;
3003 } else {
3004 if (tty->termios->c_cflag & CLOCAL)
3005 do_clocal = 1;
3006 }
3007
3008 /*
3009 * Block waiting for the carrier detect and the line to become
3010 * free (i.e., not in use by the callout). While we are in
3011 * this loop, state->count is dropped by one, so that
3012 * rs_close() knows when to free things. We restore it upon
3013 * exit, either normal or abnormal.
3014 */
3015 retval = 0;
3016 add_wait_queue(&info->open_wait, &wait);
3017 #ifdef SERIAL_DEBUG_OPEN
3018 printk("block_til_ready before block: ttys%d, count = %d\n",
3019 state->line, state->count);
3020 #endif
3021 save_flags(flags); cli();
3022 if (!tty_hung_up_p(filp)) {
3023 extra_count = 1;
3024 state->count--;
3025 }
3026 restore_flags(flags);
3027 info->blocked_open++;
3028 while (1) {
3029 save_flags(flags); cli();
3030 if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
3031 (tty->termios->c_cflag & CBAUD))
3032 serial_out(info, UART_MCR,
3033 serial_inp(info, UART_MCR) |
3034 (UART_MCR_DTR | UART_MCR_RTS));
3035 restore_flags(flags);
3036 set_current_state(TASK_INTERRUPTIBLE);
3037 if (tty_hung_up_p(filp) ||
3038 !(info->flags & ASYNC_INITIALIZED)) {
3039 #ifdef SERIAL_DO_RESTART
3040 if (info->flags & ASYNC_HUP_NOTIFY)
3041 retval = -EAGAIN;
3042 else
3043 retval = -ERESTARTSYS;
3044 #else
3045 retval = -EAGAIN;
3046 #endif
3047 break;
3048 }
3049 if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
3050 !(info->flags & ASYNC_CLOSING) &&
3051 (do_clocal || (serial_in(info, UART_MSR) &
3052 UART_MSR_DCD)))
3053 break;
3054 if (signal_pending(current)) {
3055 retval = -ERESTARTSYS;
3056 break;
3057 }
3058 #ifdef SERIAL_DEBUG_OPEN
3059 printk("block_til_ready blocking: ttys%d, count = %d\n",
3060 info->line, state->count);
3061 #endif
3062 schedule();
3063 }
3064 set_current_state(TASK_RUNNING);
3065 remove_wait_queue(&info->open_wait, &wait);
3066 if (extra_count)
3067 state->count++;
3068 info->blocked_open--;
3069 #ifdef SERIAL_DEBUG_OPEN
3070 printk("block_til_ready after blocking: ttys%d, count = %d\n",
3071 info->line, state->count);
3072 #endif
3073 if (retval)
3074 return retval;
3075 info->flags |= ASYNC_NORMAL_ACTIVE;
3076 return 0;
3077 }
3078
3079 static int get_async_struct(int line, struct async_struct **ret_info)
3080 {
3081 struct async_struct *info;
3082 struct serial_state *sstate;
3083
3084 sstate = rs_table + line;
3085 sstate->count++;
3086 if (sstate->info) {
3087 *ret_info = sstate->info;
3088 return 0;
3089 }
3090 info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
3091 if (!info) {
3092 sstate->count--;
3093 return -ENOMEM;
3094 }
3095 memset(info, 0, sizeof(struct async_struct));
3096 init_waitqueue_head(&info->open_wait);
3097 init_waitqueue_head(&info->close_wait);
3098 init_waitqueue_head(&info->delta_msr_wait);
3099 info->magic = SERIAL_MAGIC;
3100 info->port = sstate->port;
3101 info->flags = sstate->flags;
3102 info->io_type = sstate->io_type;
3103 info->iomem_base = sstate->iomem_base;
3104 info->iomem_reg_shift = sstate->iomem_reg_shift;
3105 info->xmit_fifo_size = sstate->xmit_fifo_size;
3106 info->line = line;
3107 info->tqueue.routine = do_softint;
3108 info->tqueue.data = info;
3109 info->state = sstate;
3110 if (sstate->info) {
3111 kfree(info);
3112 *ret_info = sstate->info;
3113 return 0;
3114 }
3115 *ret_info = sstate->info = info;
3116 return 0;
3117 }
3118
3119 /*
3120 * This routine is called whenever a serial port is opened. It
3121 * enables interrupts for a serial port, linking in its async structure into
3122 * the IRQ chain. It also performs the serial-specific
3123 * initialization for the tty structure.
3124 */
3125 static int rs_open(struct tty_struct *tty, struct file * filp)
3126 {
3127 struct async_struct *info;
3128 int retval, line;
3129 unsigned long page;
3130
3131 MOD_INC_USE_COUNT;
3132 line = MINOR(tty->device) - tty->driver.minor_start;
3133 if ((line < 0) || (line >= NR_PORTS)) {
3134 MOD_DEC_USE_COUNT;
3135 return -ENODEV;
3136 }
3137 retval = get_async_struct(line, &info);
3138 if (retval) {
3139 MOD_DEC_USE_COUNT;
3140 return retval;
3141 }
3142 tty->driver_data = info;
3143 info->tty = tty;
3144 if (serial_paranoia_check(info, tty->device, "rs_open")) {
3145 MOD_DEC_USE_COUNT;
3146 return -ENODEV;
3147 }
3148
3149 #ifdef SERIAL_DEBUG_OPEN
3150 printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
3151 info->state->count);
3152 #endif
3153 #if (LINUX_VERSION_CODE > 0x20100)
3154 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
3155 #endif
3156
3157 if (!tmp_buf) {
3158 page = get_zeroed_page(GFP_KERNEL);
3159 if (!page) {
3160 MOD_DEC_USE_COUNT;
3161 return -ENOMEM;
3162 }
3163 if (tmp_buf)
3164 free_page(page);
3165 else
3166 tmp_buf = (unsigned char *) page;
3167 }
3168
3169 /*
3170 * If the port is the middle of closing, bail out now
3171 */
3172 if (tty_hung_up_p(filp) ||
3173 (info->flags & ASYNC_CLOSING)) {
3174 if (info->flags & ASYNC_CLOSING)
3175 interruptible_sleep_on(&info->close_wait);
3176 MOD_DEC_USE_COUNT;
3177 #ifdef SERIAL_DO_RESTART
3178 return ((info->flags & ASYNC_HUP_NOTIFY) ?
3179 -EAGAIN : -ERESTARTSYS);
3180 #else
3181 return -EAGAIN;
3182 #endif
3183 }
3184
3185 /*
3186 * Start up serial port
3187 */
3188 retval = startup(info);
3189 if (retval) {
3190 MOD_DEC_USE_COUNT;
3191 return retval;
3192 }
3193
3194 retval = block_til_ready(tty, filp, info);
3195 if (retval) {
3196 #ifdef SERIAL_DEBUG_OPEN
3197 printk("rs_open returning after block_til_ready with %d\n",
3198 retval);
3199 #endif
3200 MOD_DEC_USE_COUNT;
3201 return retval;
3202 }
3203
3204 if ((info->state->count == 1) &&
3205 (info->flags & ASYNC_SPLIT_TERMIOS)) {
3206 if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
3207 *tty->termios = info->state->normal_termios;
3208 else
3209 *tty->termios = info->state->callout_termios;
3210 change_speed(info, 0);
3211 }
3212 #ifdef CONFIG_SERIAL_CONSOLE
3213 if (sercons.cflag && sercons.index == line) {
3214 tty->termios->c_cflag = sercons.cflag;
3215 sercons.cflag = 0;
3216 change_speed(info, 0);
3217 }
3218 #endif
3219 info->session = current->session;
3220 info->pgrp = current->pgrp;
3221
3222 #ifdef SERIAL_DEBUG_OPEN
3223 printk("rs_open ttys%d successful...", info->line);
3224 #endif
3225 return 0;
3226 }
3227
3228 /*
3229 * /proc fs routines....
3230 */
3231
3232 static inline int line_info(char *buf, struct serial_state *state)
3233 {
3234 struct async_struct *info = state->info, scr_info;
3235 char stat_buf[30], control, status;
3236 int ret;
3237 unsigned long flags;
3238
3239 ret = sprintf(buf, "%d: uart:%s port:%lX irq:%d",
3240 state->line, uart_config[state->type].name,
3241 state->port, state->irq);
3242
3243 if (!state->port || (state->type == PORT_UNKNOWN)) {
3244 ret += sprintf(buf+ret, "\n");
3245 return ret;
3246 }
3247
3248 /*
3249 * Figure out the current RS-232 lines
3250 */
3251 if (!info) {
3252 info = &scr_info; /* This is just for serial_{in,out} */
3253
3254 info->magic = SERIAL_MAGIC;
3255 info->port = state->port;
3256 info->flags = state->flags;
3257 info->quot = 0;
3258 info->tty = 0;
3259 }
3260 save_flags(flags); cli();
3261 status = serial_in(info, UART_MSR);
3262 control = info != &scr_info ? info->MCR : serial_in(info, UART_MCR);
3263 restore_flags(flags);
3264
3265 stat_buf[0] = 0;
3266 stat_buf[1] = 0;
3267 if (control & UART_MCR_RTS)
3268 strcat(stat_buf, "|RTS");
3269 if (status & UART_MSR_CTS)
3270 strcat(stat_buf, "|CTS");
3271 if (control & UART_MCR_DTR)
3272 strcat(stat_buf, "|DTR");
3273 if (status & UART_MSR_DSR)
3274 strcat(stat_buf, "|DSR");
3275 if (status & UART_MSR_DCD)
3276 strcat(stat_buf, "|CD");
3277 if (status & UART_MSR_RI)
3278 strcat(stat_buf, "|RI");
3279
3280 if (info->quot) {
3281 ret += sprintf(buf+ret, " baud:%d",
3282 state->baud_base / info->quot);
3283 }
3284
3285 ret += sprintf(buf+ret, " tx:%d rx:%d",
3286 state->icount.tx, state->icount.rx);
3287
3288 if (state->icount.frame)
3289 ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
3290
3291 if (state->icount.parity)
3292 ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
3293
3294 if (state->icount.brk)
3295 ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
3296
3297 if (state->icount.overrun)
3298 ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
3299
3300 /*
3301 * Last thing is the RS-232 status lines
3302 */
3303 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
3304 return ret;
3305 }
3306
3307 int rs_read_proc(char *page, char **start, off_t off, int count,
3308 int *eof, void *data)
3309 {
3310 int i, len = 0, l;
3311 off_t begin = 0;
3312
3313 len += sprintf(page, "serinfo:1.0 driver:%s%s revision:%s\n",
3314 serial_version, LOCAL_VERSTRING, serial_revdate);
3315 for (i = 0; i < NR_PORTS && len < 4000; i++) {
3316 l = line_info(page + len, &rs_table[i]);
3317 len += l;
3318 if (len+begin > off+count)
3319 goto done;
3320 if (len+begin < off) {
3321 begin += len;
3322 len = 0;
3323 }
3324 }
3325 *eof = 1;
3326 done:
3327 if (off >= len+begin)
3328 return 0;
3329 *start = page + (off-begin);
3330 return ((count < begin+len-off) ? count : begin+len-off);
3331 }
3332
3333 /*
3334 * ---------------------------------------------------------------------
3335 * rs_init() and friends
3336 *
3337 * rs_init() is called at boot-time to initialize the serial driver.
3338 * ---------------------------------------------------------------------
3339 */
3340
3341 /*
3342 * This routine prints out the appropriate serial driver version
3343 * number, and identifies which options were configured into this
3344 * driver.
3345 */
3346 static char serial_options[] __initdata =
3347 #ifdef CONFIG_HUB6
3348 " HUB-6"
3349 #define SERIAL_OPT
3350 #endif
3351 #ifdef CONFIG_SERIAL_MANY_PORTS
3352 " MANY_PORTS"
3353 #define SERIAL_OPT
3354 #endif
3355 #ifdef CONFIG_SERIAL_MULTIPORT
3356 " MULTIPORT"
3357 #define SERIAL_OPT
3358 #endif
3359 #ifdef CONFIG_SERIAL_SHARE_IRQ
3360 " SHARE_IRQ"
3361 #define SERIAL_OPT
3362 #endif
3363 #ifdef CONFIG_SERIAL_DETECT_IRQ
3364 " DETECT_IRQ"
3365 #define SERIAL_OPT
3366 #endif
3367 #ifdef ENABLE_SERIAL_PCI
3368 " SERIAL_PCI"
3369 #define SERIAL_OPT
3370 #endif
3371 #ifdef ENABLE_SERIAL_PNP
3372 " ISAPNP"
3373 #define SERIAL_OPT
3374 #endif
3375 #ifdef SERIAL_OPT
3376 " enabled\n";
3377 #else
3378 " no serial options enabled\n";
3379 #endif
3380 #undef SERIAL_OPT
3381
3382 static _INLINE_ void show_serial_version(void)
3383 {
3384 printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name,
3385 serial_version, LOCAL_VERSTRING, serial_revdate,
3386 serial_options);
3387 }
3388
3389 /*
3390 * This routine detect the IRQ of a serial port by clearing OUT2 when
3391 * no UART interrupt are requested (IER = 0) (*GPL*). This seems to work at
3392 * each time, as long as no other device permanently request the IRQ.
3393 * If no IRQ is detected, or multiple IRQ appear, this function returns 0.
3394 * The variable "state" and the field "state->port" should not be null.
3395 */
3396 static unsigned detect_uart_irq (struct serial_state * state)
3397 {
3398 int irq;
3399 unsigned long irqs;
3400 unsigned char save_mcr, save_ier;
3401 struct async_struct scr_info; /* serial_{in,out} because HUB6 */
3402
3403 #ifdef CONFIG_SERIAL_MANY_PORTS
3404 unsigned char save_ICP=0; /* no warning */
3405 unsigned short ICP=0;
3406
3407 if (state->flags & ASYNC_FOURPORT) {
3408 ICP = (state->port & 0xFE0) | 0x01F;
3409 save_ICP = inb_p(ICP);
3410 outb_p(0x80, ICP);
3411 (void) inb_p(ICP);
3412 }
3413 #endif
3414 scr_info.magic = SERIAL_MAGIC;
3415 scr_info.state = state;
3416 scr_info.port = state->port;
3417 scr_info.flags = state->flags;
3418 #ifdef CONFIG_HUB6
3419 scr_info.hub6 = state->hub6;
3420 #endif
3421 scr_info.io_type = state->io_type;
3422 scr_info.iomem_base = state->iomem_base;
3423 scr_info.iomem_reg_shift = state->iomem_reg_shift;
3424
3425 /* forget possible initially masked and pending IRQ */
3426 probe_irq_off(probe_irq_on());
3427 save_mcr = serial_inp(&scr_info, UART_MCR);
3428 save_ier = serial_inp(&scr_info, UART_IER);
3429 serial_outp(&scr_info, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
3430
3431 irqs = probe_irq_on();
3432 serial_outp(&scr_info, UART_MCR, 0);
3433 udelay (10);
3434 if (state->flags & ASYNC_FOURPORT) {
3435 serial_outp(&scr_info, UART_MCR,
3436 UART_MCR_DTR | UART_MCR_RTS);
3437 } else {
3438 serial_outp(&scr_info, UART_MCR,
3439 UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
3440 }
3441 serial_outp(&scr_info, UART_IER, 0x0f); /* enable all intrs */
3442 (void)serial_inp(&scr_info, UART_LSR);
3443 (void)serial_inp(&scr_info, UART_RX);
3444 (void)serial_inp(&scr_info, UART_IIR);
3445 (void)serial_inp(&scr_info, UART_MSR);
3446 serial_outp(&scr_info, UART_TX, 0xFF);
3447 udelay (20);
3448 irq = probe_irq_off(irqs);
3449
3450 serial_outp(&scr_info, UART_MCR, save_mcr);
3451 serial_outp(&scr_info, UART_IER, save_ier);
3452 #ifdef CONFIG_SERIAL_MANY_PORTS
3453 if (state->flags & ASYNC_FOURPORT)
3454 outb_p(save_ICP, ICP);
3455 #endif
3456 return (irq > 0)? irq : 0;
3457 }
3458
3459 /*
3460 * This is a quickie test to see how big the FIFO is.
3461 * It doesn't work at all the time, more's the pity.
3462 */
3463 static int size_fifo(struct async_struct *info)
3464 {
3465 unsigned char old_fcr, old_mcr, old_dll, old_dlm;
3466 int count;
3467
3468 old_fcr = serial_inp(info, UART_FCR);
3469 old_mcr = serial_inp(info, UART_MCR);
3470 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO |
3471 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
3472 serial_outp(info, UART_MCR, UART_MCR_LOOP);
3473 serial_outp(info, UART_LCR, UART_LCR_DLAB);
3474 old_dll = serial_inp(info, UART_DLL);
3475 old_dlm = serial_inp(info, UART_DLM);
3476 serial_outp(info, UART_DLL, 0x01);
3477 serial_outp(info, UART_DLM, 0x00);
3478 serial_outp(info, UART_LCR, 0x03);
3479 for (count = 0; count < 256; count++)
3480 serial_outp(info, UART_TX, count);
3481 mdelay(20);
3482 for (count = 0; (serial_inp(info, UART_LSR) & UART_LSR_DR) &&
3483 (count < 256); count++)
3484 serial_inp(info, UART_RX);
3485 serial_outp(info, UART_FCR, old_fcr);
3486 serial_outp(info, UART_MCR, old_mcr);
3487 serial_outp(info, UART_LCR, UART_LCR_DLAB);
3488 serial_outp(info, UART_DLL, old_dll);
3489 serial_outp(info, UART_DLM, old_dlm);
3490
3491 return count;
3492 }
3493
3494 /*
3495 * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
3496 * When this function is called we know it is at least a StarTech
3497 * 16650 V2, but it might be one of several StarTech UARTs, or one of
3498 * its clones. (We treat the broken original StarTech 16650 V1 as a
3499 * 16550, and why not? Startech doesn't seem to even acknowledge its
3500 * existence.)
3501 *
3502 * What evil have men's minds wrought...
3503 */
3504 static void autoconfig_startech_uarts(struct async_struct *info,
3505 struct serial_state *state,
3506 unsigned long flags)
3507 {
3508 unsigned char scratch, scratch2, scratch3;
3509
3510 /*
3511 * First we check to see if it's an Oxford Semiconductor UART.
3512 *
3513 * If we have to do this here because some non-National
3514 * Semiconductor clone chips lock up if you try writing to the
3515 * LSR register (which serial_icr_read does)
3516 */
3517 if (state->type == PORT_16550A) {
3518 /*
3519 * EFR [4] must be set else this test fails
3520 *
3521 * This shouldn't be necessary, but Mike Hudson
3522 * (Exoray@isys.ca) claims that it's needed for 952
3523 * dual UART's (which are not recommended for new designs).
3524 */
3525 info->ACR = 0;
3526 serial_out(info, UART_LCR, 0xBF);
3527 serial_out(info, UART_EFR, 0x10);
3528 serial_out(info, UART_LCR, 0x00);
3529 /* Check for Oxford Semiconductor 16C950 */
3530 scratch = serial_icr_read(info, UART_ID1);
3531 scratch2 = serial_icr_read(info, UART_ID2);
3532 scratch3 = serial_icr_read(info, UART_ID3);
3533
3534 if (scratch == 0x16 && scratch2 == 0xC9 &&
3535 (scratch3 == 0x50 || scratch3 == 0x52 ||
3536 scratch3 == 0x54)) {
3537 state->type = PORT_16C950;
3538 state->revision = serial_icr_read(info, UART_REV) |
3539 (scratch3 << 8);
3540 return;
3541 }
3542 }
3543
3544 /*
3545 * We check for a XR16C850 by setting DLL and DLM to 0, and
3546 * then reading back DLL and DLM. If DLM reads back 0x10,
3547 * then the UART is a XR16C850 and the DLL contains the chip
3548 * revision. If DLM reads back 0x14, then the UART is a
3549 * XR16C854.
3550 *
3551 */
3552 serial_outp(info, UART_LCR, UART_LCR_DLAB);
3553 serial_outp(info, UART_DLL, 0);
3554 serial_outp(info, UART_DLM, 0);
3555 state->revision = serial_inp(info, UART_DLL);
3556 scratch = serial_inp(info, UART_DLM);
3557 serial_outp(info, UART_LCR, 0);
3558 if (scratch == 0x10 || scratch == 0x14) {
3559 state->type = PORT_16850;
3560 return;
3561 }
3562
3563 /*
3564 * We distinguish between the '654 and the '650 by counting
3565 * how many bytes are in the FIFO. I'm using this for now,
3566 * since that's the technique that was sent to me in the
3567 * serial driver update, but I'm not convinced this works.
3568 * I've had problems doing this in the past. -TYT
3569 */
3570 if (size_fifo(info) == 64)
3571 state->type = PORT_16654;
3572 else
3573 state->type = PORT_16650V2;
3574 }
3575
3576 /*
3577 * This routine is called by rs_init() to initialize a specific serial
3578 * port. It determines what type of UART chip this serial port is
3579 * using: 8250, 16450, 16550, 16550A. The important question is
3580 * whether or not this UART is a 16550A or not, since this will
3581 * determine whether or not we can use its FIFO features or not.
3582 */
3583 static void autoconfig(struct serial_state * state)
3584 {
3585 unsigned char status1, status2, scratch, scratch2, scratch3;
3586 unsigned char save_lcr, save_mcr;
3587 struct async_struct *info, scr_info;
3588 unsigned long flags;
3589
3590 state->type = PORT_UNKNOWN;
3591
3592 #ifdef SERIAL_DEBUG_AUTOCONF
3593 printk("Testing ttyS%d (0x%04lx, 0x%04x)...\n", state->line,
3594 state->port, (unsigned) state->iomem_base);
3595 #endif
3596
3597 if (!CONFIGURED_SERIAL_PORT(state))
3598 return;
3599
3600 info = &scr_info; /* This is just for serial_{in,out} */
3601
3602 info->magic = SERIAL_MAGIC;
3603 info->state = state;
3604 info->port = state->port;
3605 info->flags = state->flags;
3606 #ifdef CONFIG_HUB6
3607 info->hub6 = state->hub6;
3608 #endif
3609 info->io_type = state->io_type;
3610 info->iomem_base = state->iomem_base;
3611 info->iomem_reg_shift = state->iomem_reg_shift;
3612
3613 save_flags(flags); cli();
3614
3615 if (!(state->flags & ASYNC_BUGGY_UART) &&
3616 !state->iomem_base) {
3617 /*
3618 * Do a simple existence test first; if we fail this,
3619 * there's no point trying anything else.
3620 *
3621 * 0x80 is used as a nonsense port to prevent against
3622 * false positives due to ISA bus float. The
3623 * assumption is that 0x80 is a non-existent port;
3624 * which should be safe since include/asm/io.h also
3625 * makes this assumption.
3626 */
3627 scratch = serial_inp(info, UART_IER);
3628 serial_outp(info, UART_IER, 0);
3629 #ifdef __i386__
3630 outb(0xff, 0x080);
3631 #endif
3632 scratch2 = serial_inp(info, UART_IER);
3633 serial_outp(info, UART_IER, 0x0F);
3634 #ifdef __i386__
3635 outb(0, 0x080);
3636 #endif
3637 scratch3 = serial_inp(info, UART_IER);
3638 serial_outp(info, UART_IER, scratch);
3639 if (scratch2 || scratch3 != 0x0F) {
3640 #ifdef SERIAL_DEBUG_AUTOCONF
3641 printk("serial: ttyS%d: simple autoconfig failed "
3642 "(%02x, %02x)\n", state->line,
3643 scratch2, scratch3);
3644 #endif
3645 restore_flags(flags);
3646 return; /* We failed; there's nothing here */
3647 }
3648 }
3649
3650 save_mcr = serial_in(info, UART_MCR);
3651 save_lcr = serial_in(info, UART_LCR);
3652
3653 /*
3654 * Check to see if a UART is really there. Certain broken
3655 * internal modems based on the Rockwell chipset fail this
3656 * test, because they apparently don't implement the loopback
3657 * test mode. So this test is skipped on the COM 1 through
3658 * COM 4 ports. This *should* be safe, since no board
3659 * manufacturer would be stupid enough to design a board
3660 * that conflicts with COM 1-4 --- we hope!
3661 */
3662 if (!(state->flags & ASYNC_SKIP_TEST)) {
3663 serial_outp(info, UART_MCR, UART_MCR_LOOP | 0x0A);
3664 status1 = serial_inp(info, UART_MSR) & 0xF0;
3665 serial_outp(info, UART_MCR, save_mcr);
3666 if (status1 != 0x90) {
3667 #ifdef SERIAL_DEBUG_AUTOCONF
3668 printk("serial: ttyS%d: no UART loopback failed\n",
3669 state->line);
3670 #endif
3671 restore_flags(flags);
3672 return;
3673 }
3674 }
3675 serial_outp(info, UART_LCR, 0xBF); /* set up for StarTech test */
3676 serial_outp(info, UART_EFR, 0); /* EFR is the same as FCR */
3677 serial_outp(info, UART_LCR, 0);
3678 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
3679 scratch = serial_in(info, UART_IIR) >> 6;
3680 switch (scratch) {
3681 case 0:
3682 state->type = PORT_16450;
3683 break;
3684 case 1:
3685 state->type = PORT_UNKNOWN;
3686 break;
3687 case 2:
3688 state->type = PORT_16550;
3689 break;
3690 case 3:
3691 state->type = PORT_16550A;
3692 break;
3693 }
3694 if (state->type == PORT_16550A) {
3695 /* Check for Startech UART's */
3696 serial_outp(info, UART_LCR, UART_LCR_DLAB);
3697 if (serial_in(info, UART_EFR) == 0) {
3698 state->type = PORT_16650;
3699 } else {
3700 serial_outp(info, UART_LCR, 0xBF);
3701 if (serial_in(info, UART_EFR) == 0)
3702 autoconfig_startech_uarts(info, state, flags);
3703 }
3704 }
3705 if (state->type == PORT_16550A) {
3706 /* Check for TI 16750 */
3707 serial_outp(info, UART_LCR, save_lcr | UART_LCR_DLAB);
3708 serial_outp(info, UART_FCR,
3709 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
3710 scratch = serial_in(info, UART_IIR) >> 5;
3711 if (scratch == 7) {
3712 /*
3713 * If this is a 16750, and not a cheap UART
3714 * clone, then it should only go into 64 byte
3715 * mode if the UART_FCR7_64BYTE bit was set
3716 * while UART_LCR_DLAB was latched.
3717 */
3718 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
3719 serial_outp(info, UART_LCR, 0);
3720 serial_outp(info, UART_FCR,
3721 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
3722 scratch = serial_in(info, UART_IIR) >> 5;
3723 if (scratch == 6)
3724 state->type = PORT_16750;
3725 }
3726 serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
3727 }
3728 #if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
3729 if (state->type == PORT_16550A) {
3730 int i;
3731
3732 for (i = 0 ; i < PORT_RSA_MAX ; ++i) {
3733 if (!probe_rsa[i] && !force_rsa[i])
3734 break;
3735 if (((probe_rsa[i] != state->port) ||
3736 check_region(state->port + UART_RSA_BASE, 16)) &&
3737 (force_rsa[i] != state->port))
3738 continue;
3739 if (!enable_rsa(info))
3740 continue;
3741 state->type = PORT_RSA;
3742 state->baud_base = SERIAL_RSA_BAUD_BASE;
3743 break;
3744 }
3745 }
3746 #endif
3747 serial_outp(info, UART_LCR, save_lcr);
3748 if (state->type == PORT_16450) {
3749 scratch = serial_in(info, UART_SCR);
3750 serial_outp(info, UART_SCR, 0xa5);
3751 status1 = serial_in(info, UART_SCR);
3752 serial_outp(info, UART_SCR, 0x5a);
3753 status2 = serial_in(info, UART_SCR);
3754 serial_outp(info, UART_SCR, scratch);
3755
3756 if ((status1 != 0xa5) || (status2 != 0x5a))
3757 state->type = PORT_8250;
3758 }
3759 state->xmit_fifo_size = uart_config[state->type].dfl_xmit_fifo_size;
3760
3761 if (state->type == PORT_UNKNOWN) {
3762 restore_flags(flags);
3763 return;
3764 }
3765
3766 if (info->port) {
3767 #ifdef CONFIG_SERIAL_RSA
3768 if (state->type == PORT_RSA)
3769 request_region(info->port + UART_RSA_BASE, 16,
3770 "serial_rsa(auto)");
3771 else
3772 #endif
3773 request_region(info->port,8,"serial(auto)");
3774 }
3775
3776 /*
3777 * Reset the UART.
3778 */
3779 #ifdef CONFIG_SERIAL_RSA
3780 if (state->type == PORT_RSA)
3781 serial_outp(info, UART_RSA_FRR, 0);
3782 #endif
3783 serial_outp(info, UART_MCR, save_mcr);
3784 serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
3785 UART_FCR_CLEAR_RCVR |
3786 UART_FCR_CLEAR_XMIT));
3787 serial_outp(info, UART_FCR, 0);
3788 (void)serial_in(info, UART_RX);
3789 serial_outp(info, UART_IER, 0);
3790
3791 restore_flags(flags);
3792 }
3793
3794 int register_serial(struct serial_struct *req);
3795 void unregister_serial(int line);
3796
3797 #if (LINUX_VERSION_CODE > 0x20100)
3798 EXPORT_SYMBOL(register_serial);
3799 EXPORT_SYMBOL(unregister_serial);
3800 #else
3801 static struct symbol_table serial_syms = {
3802 #include <linux/symtab_begin.h>
3803 X(register_serial),
3804 X(unregister_serial),
3805 #include <linux/symtab_end.h>
3806 };
3807 #endif
3808
3809
3810 #if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
3811
3812 static void __init printk_pnp_dev_id(unsigned short vendor,
3813 unsigned short device)
3814 {
3815 printk("%c%c%c%x%x%x%x",
3816 'A' + ((vendor >> 2) & 0x3f) - 1,
3817 'A' + (((vendor & 3) << 3) | ((vendor >> 13) & 7)) - 1,
3818 'A' + ((vendor >> 8) & 0x1f) - 1,
3819 (device >> 4) & 0x0f,
3820 device & 0x0f,
3821 (device >> 12) & 0x0f,
3822 (device >> 8) & 0x0f);
3823 }
3824
3825 static _INLINE_ int get_pci_port(struct pci_dev *dev,
3826 struct pci_board *board,
3827 struct serial_struct *req,
3828 int idx)
3829 {
3830 unsigned long port;
3831 int base_idx;
3832 int max_port;
3833 int offset;
3834
3835 base_idx = SPCI_FL_GET_BASE(board->flags);
3836 if (board->flags & SPCI_FL_BASE_TABLE)
3837 base_idx += idx;
3838
3839 if (board->flags & SPCI_FL_REGION_SZ_CAP) {
3840 max_port = pci_resource_len(dev, base_idx) / 8;
3841 if (idx >= max_port)
3842 return 1;
3843 }
3844
3845 offset = board->first_uart_offset;
3846
3847 /* Timedia/SUNIX uses a mixture of BARs and offsets */
3848 /* Ugh, this is ugly as all hell --- TYT */
3849 if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
3850 switch(idx) {
3851 case 0: base_idx=0;
3852 break;
3853 case 1: base_idx=0; offset=8;
3854 break;
3855 case 2: base_idx=1;
3856 break;
3857 case 3: base_idx=1; offset=8;
3858 break;
3859 case 4: /* BAR 2*/
3860 case 5: /* BAR 3 */
3861 case 6: /* BAR 4*/
3862 case 7: base_idx=idx-2; /* BAR 5*/
3863 }
3864
3865 port = pci_resource_start(dev, base_idx) + offset;
3866
3867 if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
3868 port += idx * (board->uart_offset ? board->uart_offset : 8);
3869
3870 if (IS_PCI_REGION_IOPORT(dev, base_idx)) {
3871 req->port = port;
3872 if (HIGH_BITS_OFFSET)
3873 req->port_high = port >> HIGH_BITS_OFFSET;
3874 else
3875 req->port_high = 0;
3876 return 0;
3877 }
3878 req->io_type = SERIAL_IO_MEM;
3879 req->iomem_base = ioremap(port, board->uart_offset);
3880 req->iomem_reg_shift = board->reg_shift;
3881 req->port = 0;
3882 return 0;
3883 }
3884
3885 static _INLINE_ int get_pci_irq(struct pci_dev *dev,
3886 struct pci_board *board,
3887 int idx)
3888 {
3889 int base_idx;
3890
3891 if ((board->flags & SPCI_FL_IRQRESOURCE) == 0)
3892 return dev->irq;
3893
3894 base_idx = SPCI_FL_GET_IRQBASE(board->flags);
3895 if (board->flags & SPCI_FL_IRQ_TABLE)
3896 base_idx += idx;
3897
3898 return PCI_IRQ_RESOURCE(dev, base_idx);
3899 }
3900
3901 /*
3902 * Common enabler code shared by both PCI and ISAPNP probes
3903 */
3904 static void __init start_pci_pnp_board(struct pci_dev *dev,
3905 struct pci_board *board)
3906 {
3907 int k, line;
3908 struct serial_struct serial_req;
3909 int base_baud;
3910
3911 if (PREPARE_FUNC(dev) && (PREPARE_FUNC(dev))(dev) < 0) {
3912 printk("serial: PNP device '");
3913 printk_pnp_dev_id(board->vendor, board->device);
3914 printk("' prepare failed\n");
3915 return;
3916 }
3917
3918 if (ACTIVATE_FUNC(dev) && (ACTIVATE_FUNC(dev))(dev) < 0) {
3919 printk("serial: PNP device '");
3920 printk_pnp_dev_id(board->vendor, board->device);
3921 printk("' activate failed\n");
3922 return;
3923 }
3924
3925 if (!(board->flags & SPCI_FL_ISPNP) && pci_enable_device(dev)) {
3926 printk("serial: PCI device enable failed\n");
3927 return;
3928 }
3929
3930 /*
3931 * Run the initialization function, if any
3932 */
3933 if (board->init_fn && ((board->init_fn)(dev, board, 1) != 0))
3934 return;
3935
3936 #ifdef MODULE
3937 /*
3938 * Register the serial board in the array if we need to
3939 * shutdown the board on a module unload.
3940 */
3941 if (DEACTIVATE_FUNC(dev) || board->init_fn) {
3942 if (serial_pci_board_idx >= NR_PCI_BOARDS)
3943 return;
3944 serial_pci_board[serial_pci_board_idx].board = *board;
3945 serial_pci_board[serial_pci_board_idx].dev = dev;
3946 serial_pci_board_idx++;
3947 }
3948 #endif
3949
3950 base_baud = board->base_baud;
3951 if (!base_baud)
3952 base_baud = BASE_BAUD;
3953 memset(&serial_req, 0, sizeof(serial_req));
3954
3955 for (k=0; k < board->num_ports; k++) {
3956 serial_req.irq = get_pci_irq(dev, board, k);
3957 if (get_pci_port(dev, board, &serial_req, k))
3958 break;
3959 serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
3960 #ifdef SERIAL_DEBUG_PCI
3961 printk("Setup PCI/PNP port: port %x, irq %d, type %d\n",
3962 serial_req.port, serial_req.irq, serial_req.io_type);
3963 #endif
3964 line = register_serial(&serial_req);
3965 if (line < 0)
3966 break;
3967 rs_table[line].baud_base = base_baud;
3968 }
3969 }
3970 #endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
3971
3972 #ifdef ENABLE_SERIAL_PCI
3973 /*
3974 * Some PCI serial cards using the PLX 9050 PCI interface chip require
3975 * that the card interrupt be explicitly enabled or disabled. This
3976 * seems to be mainly needed on card using the PLX which also use I/O
3977 * mapped memory.
3978 */
3979 static int
3980 #ifndef MODULE
3981 __init
3982 #endif
3983 pci_plx9050_fn(struct pci_dev *dev, struct pci_board *board, int enable)
3984 {
3985 u8 data, *p, irq_config;
3986 int pci_config;
3987
3988 irq_config = 0x41;
3989 pci_config = PCI_COMMAND_MEMORY;
3990 if (dev->vendor == PCI_VENDOR_ID_PANACOM)
3991 irq_config = 0x43;
3992 if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
3993 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
3994 /*
3995 * As the megawolf cards have the int pins active
3996 * high, and have 2 UART chips, both ints must be
3997 * enabled on the 9050. Also, the UARTS are set in
3998 * 16450 mode by default, so we have to enable the
3999 * 16C950 'enhanced' mode so that we can use the deep
4000 * FIFOs
4001 */
4002 irq_config = 0x5b;
4003 pci_config = PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
4004 }
4005
4006 pci_read_config_byte(dev, PCI_COMMAND, &data);
4007
4008 if (enable)
4009 pci_write_config_byte(dev, PCI_COMMAND,
4010 data | pci_config);
4011
4012 /* enable/disable interrupts */
4013 p = ioremap(pci_resource_start(dev, 0), 0x80);
4014 writel(enable ? irq_config : 0x00, (unsigned long)p + 0x4c);
4015 iounmap(p);
4016
4017 if (!enable)
4018 pci_write_config_byte(dev, PCI_COMMAND,
4019 data & ~pci_config);
4020 return 0;
4021 }
4022
4023
4024 /*
4025 * SIIG serial cards have an PCI interface chip which also controls
4026 * the UART clocking frequency. Each UART can be clocked independently
4027 * (except cards equiped with 4 UARTs) and initial clocking settings
4028 * are stored in the EEPROM chip. It can cause problems because this
4029 * version of serial driver doesn't support differently clocked UART's
4030 * on single PCI card. To prevent this, initialization functions set
4031 * high frequency clocking for all UART's on given card. It is safe (I
4032 * hope) because it doesn't touch EEPROM settings to prevent conflicts
4033 * with other OSes (like M$ DOS).
4034 *
4035 * SIIG support added by Andrey Panin <pazke@mail.tp.ru>, 10/1999
4036 *
4037 * There is two family of SIIG serial cards with different PCI
4038 * interface chip and different configuration methods:
4039 * - 10x cards have control registers in IO and/or memory space;
4040 * - 20x cards have control registers in standard PCI configuration space.
4041 */
4042
4043 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
4044 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
4045
4046 static int
4047 #ifndef MODULE
4048 __init
4049 #endif
4050 pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
4051 {
4052 u16 data, *p;
4053
4054 if (!enable) return 0;
4055
4056 p = ioremap(pci_resource_start(dev, 0), 0x80);
4057
4058 switch (dev->device & 0xfff8) {
4059 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
4060 data = 0xffdf;
4061 break;
4062 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
4063 data = 0xf7ff;
4064 break;
4065 default: /* 1S1P, 4S */
4066 data = 0xfffb;
4067 break;
4068 }
4069
4070 writew(readw((unsigned long) p + 0x28) & data, (unsigned long) p + 0x28);
4071 iounmap(p);
4072 return 0;
4073 }
4074
4075 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
4076 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
4077
4078 static int
4079 #ifndef MODULE
4080 __init
4081 #endif
4082 pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
4083 {
4084 u8 data;
4085
4086 if (!enable) return 0;
4087
4088 /* Change clock frequency for the first UART. */
4089 pci_read_config_byte(dev, 0x6f, &data);
4090 pci_write_config_byte(dev, 0x6f, data & 0xef);
4091
4092 /* If this card has 2 UART, we have to do the same with second UART. */
4093 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
4094 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
4095 pci_read_config_byte(dev, 0x73, &data);
4096 pci_write_config_byte(dev, 0x73, data & 0xef);
4097 }
4098 return 0;
4099 }
4100
4101 /* Added for EKF Intel i960 serial boards */
4102 static int
4103 #ifndef MODULE
4104 __init
4105 #endif
4106 pci_inteli960ni_fn(struct pci_dev *dev,
4107 struct pci_board *board,
4108 int enable)
4109 {
4110 unsigned long oldval;
4111
4112 if (!(board->subdevice & 0x1000))
4113 return(-1);
4114
4115 if (!enable) /* is there something to deinit? */
4116 return(0);
4117
4118 #ifdef SERIAL_DEBUG_PCI
4119 printk(KERN_DEBUG " Subsystem ID %lx (intel 960)\n",
4120 (unsigned long) board->subdevice);
4121 #endif
4122 /* is firmware started? */
4123 pci_read_config_dword(dev, 0x44, (void*) &oldval);
4124 if (oldval == 0x00001000L) { /* RESET value */
4125 printk(KERN_DEBUG "Local i960 firmware missing");
4126 return(-1);
4127 }
4128 return(0);
4129 }
4130
4131 /*
4132 * Timedia has an explosion of boards, and to avoid the PCI table from
4133 * growing *huge*, we use this function to collapse some 70 entries
4134 * in the PCI table into one, for sanity's and compactness's sake.
4135 */
4136 static unsigned short timedia_single_port[] = {
4137 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 };
4138 static unsigned short timedia_dual_port[] = {
4139 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
4140 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
4141 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
4142 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
4143 0xD079, 0 };
4144 static unsigned short timedia_quad_port[] = {
4145 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
4146 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
4147 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
4148 0xB157, 0 };
4149 static unsigned short timedia_eight_port[] = {
4150 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
4151 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 };
4152 static struct timedia_struct {
4153 int num;
4154 unsigned short *ids;
4155 } timedia_data[] = {
4156 { 1, timedia_single_port },
4157 { 2, timedia_dual_port },
4158 { 4, timedia_quad_port },
4159 { 8, timedia_eight_port },
4160 { 0, 0 }
4161 };
4162
4163 static int
4164 #ifndef MODULE
4165 __init
4166 #endif
4167 pci_timedia_fn(struct pci_dev *dev, struct pci_board *board, int enable)
4168 {
4169 int i, j;
4170 unsigned short *ids;
4171
4172 if (!enable)
4173 return 0;
4174
4175 for (i=0; timedia_data[i].num; i++) {
4176 ids = timedia_data[i].ids;
4177 for (j=0; ids[j]; j++) {
4178 if (pci_get_subvendor(dev) == ids[j]) {
4179 board->num_ports = timedia_data[i].num;
4180 return 0;
4181 }
4182 }
4183 }
4184 return 0;
4185 }
4186
4187
4188 /*
4189 * This is the configuration table for all of the PCI serial boards
4190 * which we support.
4191 */
4192 static struct pci_board pci_boards[] __devinitdata = {
4193 /*
4194 * Vendor ID, Device ID,
4195 * Subvendor ID, Subdevice ID,
4196 * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
4197 * Offset to get to next UART's registers,
4198 * Register shift to use for memory-mapped I/O,
4199 * Initialization function, first UART offset
4200 */
4201 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
4202 PCI_SUBVENDOR_ID_CONNECT_TECH,
4203 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232,
4204 SPCI_FL_BASE1, 8, 1382400 },
4205 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
4206 PCI_SUBVENDOR_ID_CONNECT_TECH,
4207 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232,
4208 SPCI_FL_BASE1, 4, 1382400 },
4209 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
4210 PCI_SUBVENDOR_ID_CONNECT_TECH,
4211 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232,
4212 SPCI_FL_BASE1, 2, 1382400 },
4213 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4214 PCI_SUBVENDOR_ID_CONNECT_TECH,
4215 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232,
4216 SPCI_FL_BASE1, 8, 1382400 },
4217 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4218 PCI_SUBVENDOR_ID_CONNECT_TECH,
4219 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232,
4220 SPCI_FL_BASE1, 4, 1382400 },
4221 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4222 PCI_SUBVENDOR_ID_CONNECT_TECH,
4223 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232,
4224 SPCI_FL_BASE1, 2, 1382400 },
4225 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4226 PCI_SUBVENDOR_ID_CONNECT_TECH,
4227 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485,
4228 SPCI_FL_BASE1, 8, 921600 },
4229 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4230 PCI_SUBVENDOR_ID_CONNECT_TECH,
4231 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4,
4232 SPCI_FL_BASE1, 8, 921600 },
4233 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4234 PCI_SUBVENDOR_ID_CONNECT_TECH,
4235 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485,
4236 SPCI_FL_BASE1, 4, 921600 },
4237 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4238 PCI_SUBVENDOR_ID_CONNECT_TECH,
4239 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2,
4240 SPCI_FL_BASE1, 4, 921600 },
4241 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4242 PCI_SUBVENDOR_ID_CONNECT_TECH,
4243 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485,
4244 SPCI_FL_BASE1, 2, 921600 },
4245 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4246 PCI_SUBVENDOR_ID_CONNECT_TECH,
4247 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6,
4248 SPCI_FL_BASE1, 8, 921600 },
4249 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4250 PCI_SUBVENDOR_ID_CONNECT_TECH,
4251 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1,
4252 SPCI_FL_BASE1, 8, 921600 },
4253 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
4254 PCI_SUBVENDOR_ID_CONNECT_TECH,
4255 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1,
4256 SPCI_FL_BASE1, 4, 921600 },
4257 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
4258 PCI_ANY_ID, PCI_ANY_ID,
4259 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200 },
4260 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
4261 PCI_ANY_ID, PCI_ANY_ID,
4262 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 },
4263 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
4264 PCI_ANY_ID, PCI_ANY_ID,
4265 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 115200 },
4266 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
4267 PCI_ANY_ID, PCI_ANY_ID,
4268 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 },
4269 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
4270 PCI_ANY_ID, PCI_ANY_ID,
4271 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 115200 },
4272 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
4273 PCI_ANY_ID, PCI_ANY_ID,
4274 SPCI_FL_BASE2, 8, 115200 },
4275 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
4276 PCI_ANY_ID, PCI_ANY_ID,
4277 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 },
4278 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
4279 PCI_ANY_ID, PCI_ANY_ID,
4280 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600 },
4281 /* VScom SPCOM800, from sl@s.pl */
4282 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
4283 PCI_ANY_ID, PCI_ANY_ID,
4284 SPCI_FL_BASE2, 8, 921600 },
4285 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
4286 PCI_ANY_ID, PCI_ANY_ID,
4287 SPCI_FL_BASE2, 4, 921600 },
4288 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4289 PCI_SUBVENDOR_ID_KEYSPAN,
4290 PCI_SUBDEVICE_ID_KEYSPAN_SX2,
4291 SPCI_FL_BASE2, 2, 921600, /* IOMEM */
4292 0x400, 7, pci_plx9050_fn },
4293 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
4294 PCI_ANY_ID, PCI_ANY_ID,
4295 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600,
4296 0x400, 7, pci_plx9050_fn },
4297 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
4298 PCI_ANY_ID, PCI_ANY_ID,
4299 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4300 0x400, 7, pci_plx9050_fn },
4301 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4302 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
4303 PCI_SUBDEVICE_ID_CHASE_PCIFAST4,
4304 SPCI_FL_BASE2, 4, 460800 },
4305 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4306 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
4307 PCI_SUBDEVICE_ID_CHASE_PCIFAST8,
4308 SPCI_FL_BASE2, 8, 460800 },
4309 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4310 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
4311 PCI_SUBDEVICE_ID_CHASE_PCIFAST16,
4312 SPCI_FL_BASE2, 16, 460800 },
4313 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4314 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
4315 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC,
4316 SPCI_FL_BASE2, 16, 460800 },
4317 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4318 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
4319 PCI_SUBDEVICE_ID_CHASE_PCIRAS4,
4320 SPCI_FL_BASE2, 4, 460800 },
4321 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
4322 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
4323 PCI_SUBDEVICE_ID_CHASE_PCIRAS8,
4324 SPCI_FL_BASE2, 8, 460800 },
4325 /* Megawolf Romulus PCI Serial Card, from Mike Hudson */
4326 /* (Exoray@isys.ca) */
4327 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
4328 0x10b5, 0x106a,
4329 SPCI_FL_BASE2, 4, 921600,
4330 0x20, 2, pci_plx9050_fn, 0x03 },
4331 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
4332 PCI_ANY_ID, PCI_ANY_ID,
4333 SPCI_FL_BASE1, 4, 115200 },
4334 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
4335 PCI_ANY_ID, PCI_ANY_ID,
4336 SPCI_FL_BASE1, 2, 115200 },
4337 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
4338 PCI_ANY_ID, PCI_ANY_ID,
4339 SPCI_FL_BASE1, 8, 115200 },
4340 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
4341 PCI_ANY_ID, PCI_ANY_ID,
4342 SPCI_FL_BASE1, 8, 115200 },
4343 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
4344 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
4345 SPCI_FL_BASE0 , 4, 921600 },
4346 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
4347 PCI_ANY_ID, PCI_ANY_ID,
4348 SPCI_FL_BASE0 , 4, 115200 },
4349 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
4350 PCI_ANY_ID, PCI_ANY_ID,
4351 SPCI_FL_BASE0 , 2, 115200 },
4352 /* This board uses the size of PCI Base region 0 to
4353 * signal now many ports are available */
4354 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
4355 PCI_ANY_ID, PCI_ANY_ID,
4356 SPCI_FL_BASE0 | SPCI_FL_REGION_SZ_CAP, 32, 115200 },
4357 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
4358 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID,
4359 SPCI_FL_BASE_TABLE, 1, 921600,
4360 0, 0, pci_timedia_fn },
4361 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
4362 PCI_ANY_ID, PCI_ANY_ID,
4363 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
4364 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
4365 PCI_ANY_ID, PCI_ANY_ID,
4366 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
4367 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
4368 PCI_ANY_ID, PCI_ANY_ID,
4369 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
4370 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
4371 PCI_ANY_ID, PCI_ANY_ID,
4372 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 },
4373 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
4374 PCI_ANY_ID, PCI_ANY_ID,
4375 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 },
4376 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
4377 PCI_ANY_ID, PCI_ANY_ID,
4378 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 },
4379 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
4380 PCI_ANY_ID, PCI_ANY_ID,
4381 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
4382 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
4383 PCI_ANY_ID, PCI_ANY_ID,
4384 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 460800 },
4385 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
4386 PCI_ANY_ID, PCI_ANY_ID,
4387 SPCI_FL_BASE2, 1, 460800,
4388 0, 0, pci_siig10x_fn },
4389 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
4390 PCI_ANY_ID, PCI_ANY_ID,
4391 SPCI_FL_BASE2, 1, 460800,
4392 0, 0, pci_siig10x_fn },
4393 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
4394 PCI_ANY_ID, PCI_ANY_ID,
4395 SPCI_FL_BASE2, 1, 460800,
4396 0, 0, pci_siig10x_fn },
4397 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
4398 PCI_ANY_ID, PCI_ANY_ID,
4399 SPCI_FL_BASE2, 1, 921600,
4400 0, 0, pci_siig10x_fn },
4401 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
4402 PCI_ANY_ID, PCI_ANY_ID,
4403 SPCI_FL_BASE2, 1, 921600,
4404 0, 0, pci_siig10x_fn },
4405 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
4406 PCI_ANY_ID, PCI_ANY_ID,
4407 SPCI_FL_BASE2, 1, 921600,
4408 0, 0, pci_siig10x_fn },
4409 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
4410 PCI_ANY_ID, PCI_ANY_ID,
4411 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4412 0, 0, pci_siig10x_fn },
4413 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
4414 PCI_ANY_ID, PCI_ANY_ID,
4415 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4416 0, 0, pci_siig10x_fn },
4417 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
4418 PCI_ANY_ID, PCI_ANY_ID,
4419 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4420 0, 0, pci_siig10x_fn },
4421 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
4422 PCI_ANY_ID, PCI_ANY_ID,
4423 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4424 0, 0, pci_siig10x_fn },
4425 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
4426 PCI_ANY_ID, PCI_ANY_ID,
4427 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4428 0, 0, pci_siig10x_fn },
4429 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
4430 PCI_ANY_ID, PCI_ANY_ID,
4431 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600,
4432 0, 0, pci_siig10x_fn },
4433 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
4434 PCI_ANY_ID, PCI_ANY_ID,
4435 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600,
4436 0, 0, pci_siig10x_fn },
4437 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
4438 PCI_ANY_ID, PCI_ANY_ID,
4439 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600,
4440 0, 0, pci_siig10x_fn },
4441 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
4442 PCI_ANY_ID, PCI_ANY_ID,
4443 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600,
4444 0, 0, pci_siig10x_fn },
4445 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
4446 PCI_ANY_ID, PCI_ANY_ID,
4447 SPCI_FL_BASE0, 1, 921600,
4448 0, 0, pci_siig20x_fn },
4449 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
4450 PCI_ANY_ID, PCI_ANY_ID,
4451 SPCI_FL_BASE0, 1, 921600,
4452 0, 0, pci_siig20x_fn },
4453 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
4454 PCI_ANY_ID, PCI_ANY_ID,
4455 SPCI_FL_BASE0, 1, 921600,
4456 0, 0, pci_siig20x_fn },
4457 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
4458 PCI_ANY_ID, PCI_ANY_ID,
4459 SPCI_FL_BASE0, 1, 921600,
4460 0, 0, pci_siig20x_fn },
4461 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
4462 PCI_ANY_ID, PCI_ANY_ID,
4463 SPCI_FL_BASE0, 1, 921600,
4464 0, 0, pci_siig20x_fn },
4465 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
4466 PCI_ANY_ID, PCI_ANY_ID,
4467 SPCI_FL_BASE0, 1, 921600,
4468 0, 0, pci_siig20x_fn },
4469 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
4470 PCI_ANY_ID, PCI_ANY_ID,
4471 SPCI_FL_BASE0, 1, 921600,
4472 0, 0, pci_siig20x_fn },
4473 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
4474 PCI_ANY_ID, PCI_ANY_ID,
4475 SPCI_FL_BASE0, 1, 921600,
4476 0, 0, pci_siig20x_fn },
4477 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
4478 PCI_ANY_ID, PCI_ANY_ID,
4479 SPCI_FL_BASE0, 1, 921600,
4480 0, 0, pci_siig20x_fn },
4481 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
4482 PCI_ANY_ID, PCI_ANY_ID,
4483 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4484 0, 0, pci_siig20x_fn },
4485 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
4486 PCI_ANY_ID, PCI_ANY_ID,
4487 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4488 0, 0, pci_siig20x_fn },
4489 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
4490 PCI_ANY_ID, PCI_ANY_ID,
4491 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4492 0, 0, pci_siig20x_fn },
4493 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
4494 PCI_ANY_ID, PCI_ANY_ID,
4495 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4496 0, 0, pci_siig20x_fn },
4497 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
4498 PCI_ANY_ID, PCI_ANY_ID,
4499 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4500 0, 0, pci_siig20x_fn },
4501 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
4502 PCI_ANY_ID, PCI_ANY_ID,
4503 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600,
4504 0, 0, pci_siig20x_fn },
4505 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
4506 PCI_ANY_ID, PCI_ANY_ID,
4507 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600,
4508 0, 0, pci_siig20x_fn },
4509 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
4510 PCI_ANY_ID, PCI_ANY_ID,
4511 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600,
4512 0, 0, pci_siig20x_fn },
4513 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
4514 PCI_ANY_ID, PCI_ANY_ID,
4515 SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600,
4516 0, 0, pci_siig20x_fn },
4517 /* Computone devices submitted by Doug McNash dmcnash@computone.com */
4518 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
4519 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
4520 SPCI_FL_BASE0, 4, 921600, /* IOMEM */
4521 0x40, 2, NULL, 0x200 },
4522 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
4523 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
4524 SPCI_FL_BASE0, 8, 921600, /* IOMEM */
4525 0x40, 2, NULL, 0x200 },
4526 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
4527 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
4528 SPCI_FL_BASE0, 6, 921600, /* IOMEM */
4529 0x40, 2, NULL, 0x200 },
4530 /* Digitan DS560-558, from jimd@esoft.com */
4531 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
4532 PCI_ANY_ID, PCI_ANY_ID,
4533 SPCI_FL_BASE1, 1, 115200 },
4534 /* 3Com US Robotics 56k Voice Internal PCI model 5610 */
4535 { PCI_VENDOR_ID_USR, 0x1008,
4536 PCI_ANY_ID, PCI_ANY_ID,
4537 SPCI_FL_BASE0, 1, 115200 },
4538 /* Titan Electronic cards */
4539 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
4540 PCI_ANY_ID, PCI_ANY_ID,
4541 SPCI_FL_BASE0, 1, 921600 },
4542 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
4543 PCI_ANY_ID, PCI_ANY_ID,
4544 SPCI_FL_BASE0, 2, 921600 },
4545 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
4546 PCI_ANY_ID, PCI_ANY_ID,
4547 SPCI_FL_BASE0, 4, 921600 },
4548 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
4549 PCI_ANY_ID, PCI_ANY_ID,
4550 SPCI_FL_BASE0, 4, 921600 },
4551 /* EKF addition for i960 Boards form EKF with serial port */
4552 { PCI_VENDOR_ID_INTEL, 0x1960,
4553 0xE4BF, PCI_ANY_ID,
4554 SPCI_FL_BASE0, 32, 921600, /* max 256 ports */
4555 8<<2, 2, pci_inteli960ni_fn, 0x10000},
4556 /* RAStel 2 port modem, gerg@moreton.com.au */
4557 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
4558 PCI_ANY_ID, PCI_ANY_ID,
4559 SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 },
4560 /*
4561 * Untested PCI modems, sent in from various folks...
4562 */
4563 /* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> */
4564 { PCI_VENDOR_ID_ROCKWELL, 0x1004,
4565 0x1048, 0x1500,
4566 SPCI_FL_BASE1, 1, 115200 },
4567 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
4568 0xFF00, 0, SPCI_FL_BASE0 | SPCI_FL_IRQRESOURCE,
4569 1, 458333, 0, 0, 0, 0x20178 },
4570 #if CONFIG_DDB5074
4571 /*
4572 * NEC Vrc-5074 (Nile 4) builtin UART.
4573 * Conditionally compiled in since this is a motherboard device.
4574 */
4575 { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
4576 PCI_ANY_ID, PCI_ANY_ID,
4577 SPCI_FL_BASE0, 1, 520833,
4578 64, 3, NULL, 0x300 },
4579 #endif
4580 /* Generic serial board */
4581 { 0, 0,
4582 0, 0,
4583 SPCI_FL_BASE0, 1, 115200 },
4584 };
4585
4586 /*
4587 * Given a complete unknown PCI device, try to use some heuristics to
4588 * guess what the configuration might be, based on the pitiful PCI
4589 * serial specs. Returns 0 on success, 1 on failure.
4590 */
4591 static int _INLINE_ serial_pci_guess_board(struct pci_dev *dev,
4592 struct pci_board *board)
4593 {
4594 int num_iomem = 0, num_port = 0, first_port = -1;
4595 int i;
4596
4597 /*
4598 * If it is not a communications device or the programming
4599 * interface is greater than 6, give up.
4600 *
4601 * (Should we try to make guesses for multiport serial devices
4602 * later?)
4603 */
4604 if ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL ||
4605 (dev->class & 0xff) > 6)
4606 return 1;
4607
4608 for (i=0; i < 6; i++) {
4609 if (IS_PCI_REGION_IOPORT(dev, i)) {
4610 num_port++;
4611 if (first_port == -1)
4612 first_port = i;
4613 }
4614 if (IS_PCI_REGION_IOMEM(dev, i))
4615 num_iomem++;
4616 }
4617
4618 /*
4619 * If there is 1 or 0 iomem regions, and exactly one port, use
4620 * it.
4621 */
4622 if (num_iomem <= 1 && num_port == 1) {
4623 board->flags = first_port;
4624 return 0;
4625 }
4626 return 1;
4627 }
4628
4629
4630
4631 /*
4632 * Query PCI space for known serial boards
4633 * If found, add them to the PCI device space in rs_table[]
4634 *
4635 * Accept a maximum of eight boards
4636 *
4637 */
4638 static void __init probe_serial_pci(void)
4639 {
4640 struct pci_dev *dev = NULL;
4641 struct pci_board *board;
4642
4643 #ifdef SERIAL_DEBUG_PCI
4644 printk(KERN_DEBUG "Entered probe_serial_pci()\n");
4645 #endif
4646
4647 pci_for_each_dev(dev) {
4648 for (board = pci_boards; board->vendor; board++) {
4649 if (board->vendor != (unsigned short) PCI_ANY_ID &&
4650 dev->vendor != board->vendor)
4651 continue;
4652 if (board->device != (unsigned short) PCI_ANY_ID &&
4653 dev->device != board->device)
4654 continue;
4655 if (board->subvendor != (unsigned short) PCI_ANY_ID &&
4656 pci_get_subvendor(dev) != board->subvendor)
4657 continue;
4658 if (board->subdevice != (unsigned short) PCI_ANY_ID &&
4659 pci_get_subdevice(dev) != board->subdevice)
4660 continue;
4661 break;
4662 }
4663
4664 if (board->vendor == 0 && serial_pci_guess_board(dev, board))
4665 continue;
4666
4667 start_pci_pnp_board(dev, board);
4668 }
4669
4670 #ifdef SERIAL_DEBUG_PCI
4671 printk(KERN_DEBUG "Leaving probe_serial_pci() (probe finished)\n");
4672 #endif
4673 return;
4674 }
4675
4676 #endif /* ENABLE_SERIAL_PCI */
4677
4678 #ifdef ENABLE_SERIAL_PNP
4679
4680 struct pnp_board {
4681 unsigned short vendor;
4682 unsigned short device;
4683 };
4684
4685 static struct pnp_board pnp_devices[] __initdata = {
4686 /* Archtek America Corp. */
4687 /* Archtek SmartLink Modem 3334BT Plug & Play */
4688 { ISAPNP_VENDOR('A', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
4689 /* Anchor Datacomm BV */
4690 /* SXPro 144 External Data Fax Modem Plug & Play */
4691 { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0001) },
4692 /* SXPro 288 External Data Fax Modem Plug & Play */
4693 { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0002) },
4694 /* Rockwell 56K ACF II Fax+Data+Voice Modem */
4695 { ISAPNP_VENDOR('A', 'K', 'Y'), ISAPNP_DEVICE(0x1021) },
4696 /* AZT3005 PnP SOUND DEVICE */
4697 { ISAPNP_VENDOR('A', 'Z', 'T'), ISAPNP_DEVICE(0x4001) },
4698 /* Best Data Products Inc. Smart One 336F PnP Modem */
4699 { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
4700 /* Boca Research */
4701 /* Boca Complete Ofc Communicator 14.4 Data-FAX */
4702 { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
4703 /* Boca Research 33,600 ACF Modem */
4704 { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x1400) },
4705 /* Boca 33.6 Kbps Internal FD34FSVD */
4706 { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x3400) },
4707 /* Boca 33.6 Kbps Internal FD34FSVD */
4708 { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
4709 /* Best Data Products Inc. Smart One 336F PnP Modem */
4710 { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
4711 /* Computer Peripherals Inc */
4712 /* EuroViVa CommCenter-33.6 SP PnP */
4713 { ISAPNP_VENDOR('C', 'P', 'I'), ISAPNP_DEVICE(0x4050) },
4714 /* Creative Labs */
4715 /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
4716 { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3001) },
4717 /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
4718 { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3011) },
4719 /* Creative */
4720 /* Creative Modem Blaster Flash56 DI5601-1 */
4721 { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x1032) },
4722 /* Creative Modem Blaster V.90 DI5660 */
4723 { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x2001) },
4724 /* FUJITSU */
4725 /* Fujitsu 33600 PnP-I2 R Plug & Play */
4726 { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0202) },
4727 /* Fujitsu FMV-FX431 Plug & Play */
4728 { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0205) },
4729 /* Fujitsu 33600 PnP-I4 R Plug & Play */
4730 { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0206) },
4731 /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
4732 { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0209) },
4733 /* Archtek America Corp. */
4734 /* Archtek SmartLink Modem 3334BT Plug & Play */
4735 { ISAPNP_VENDOR('G', 'V', 'C'), ISAPNP_DEVICE(0x000F) },
4736 /* Hayes */
4737 /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
4738 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x0001) },
4739 /* Hayes Optima 336 V.34 + FAX + Voice PnP */
4740 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000C) },
4741 /* Hayes Optima 336B V.34 + FAX + Voice PnP */
4742 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000D) },
4743 /* Hayes Accura 56K Ext Fax Modem PnP */
4744 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5670) },
4745 /* Hayes Accura 56K Ext Fax Modem PnP */
4746 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5674) },
4747 /* Hayes Accura 56K Fax Modem PnP */
4748 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5675) },
4749 /* Hayes 288, V.34 + FAX */
4750 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF000) },
4751 /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
4752 { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF001) },
4753 /* IBM */
4754 /* IBM Thinkpad 701 Internal Modem Voice */
4755 { ISAPNP_VENDOR('I', 'B', 'M'), ISAPNP_DEVICE(0x0033) },
4756 /* Intertex */
4757 /* Intertex 28k8 33k6 Voice EXT PnP */
4758 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC801) },
4759 /* Intertex 33k6 56k Voice EXT PnP */
4760 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC901) },
4761 /* Intertex 28k8 33k6 Voice SP EXT PnP */
4762 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD801) },
4763 /* Intertex 33k6 56k Voice SP EXT PnP */
4764 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD901) },
4765 /* Intertex 28k8 33k6 Voice SP INT PnP */
4766 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF401) },
4767 /* Intertex 28k8 33k6 Voice SP EXT PnP */
4768 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF801) },
4769 /* Intertex 33k6 56k Voice SP EXT PnP */
4770 { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF901) },
4771 /* Kortex International */
4772 /* KORTEX 28800 Externe PnP */
4773 { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0x4522) },
4774 /* KXPro 33.6 Vocal ASVD PnP */
4775 { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0xF661) },
4776 /* Lasat */
4777 /* LASAT Internet 33600 PnP */
4778 { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4040) },
4779 /* Lasat Safire 560 PnP */
4780 { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4540) },
4781 /* Lasat Safire 336 PnP */
4782 { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x5440) },
4783 /* Microcom, Inc. */
4784 /* Microcom TravelPorte FAST V.34 Plug & Play */
4785 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x281) },
4786 /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
4787 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0336) },
4788 /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
4789 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0339) },
4790 /* Microcom DeskPorte 28.8P Plug & Play */
4791 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0342) },
4792 /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
4793 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
4794 /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
4795 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
4796 /* Microcom DeskPorte 28.8S Internal Plug & Play */
4797 { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0502) },
4798 /* Motorola */
4799 /* Motorola BitSURFR Plug & Play */
4800 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1105) },
4801 /* Motorola TA210 Plug & Play */
4802 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1111) },
4803 /* Motorola HMTA 200 (ISDN) Plug & Play */
4804 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1114) },
4805 /* Motorola BitSURFR Plug & Play */
4806 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1115) },
4807 /* Motorola Lifestyle 28.8 Internal */
4808 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1190) },
4809 /* Motorola V.3400 Plug & Play */
4810 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1501) },
4811 /* Motorola Lifestyle 28.8 V.34 Plug & Play */
4812 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1502) },
4813 /* Motorola Power 28.8 V.34 Plug & Play */
4814 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1505) },
4815 /* Motorola ModemSURFR External 28.8 Plug & Play */
4816 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1509) },
4817 /* Motorola Premier 33.6 Desktop Plug & Play */
4818 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150A) },
4819 /* Motorola VoiceSURFR 56K External PnP */
4820 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150F) },
4821 /* Motorola ModemSURFR 56K External PnP */
4822 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1510) },
4823 /* Motorola ModemSURFR 56K Internal PnP */
4824 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1550) },
4825 /* Motorola ModemSURFR Internal 28.8 Plug & Play */
4826 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1560) },
4827 /* Motorola Premier 33.6 Internal Plug & Play */
4828 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1580) },
4829 /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
4830 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15B0) },
4831 /* Motorola VoiceSURFR 56K Internal PnP */
4832 { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15F0) },
4833 /* Com 1 */
4834 /* Deskline K56 Phone System PnP */
4835 { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00A1) },
4836 /* PC Rider K56 Phone System PnP */
4837 { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00F2) },
4838 /* Pace 56 Voice Internal Plug & Play Modem */
4839 { ISAPNP_VENDOR('P', 'M', 'C'), ISAPNP_DEVICE(0x2430) },
4840 /* Generic */
4841 /* Generic standard PC COM port */
4842 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
4843 /* Generic 16550A-compatible COM port */
4844 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
4845 /* Compaq 14400 Modem */
4846 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC000) },
4847 /* Compaq 2400/9600 Modem */
4848 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC001) },
4849 /* Dial-Up Networking Serial Cable between 2 PCs */
4850 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC031) },
4851 /* Dial-Up Networking Parallel Cable between 2 PCs */
4852 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC032) },
4853 /* Standard 9600 bps Modem */
4854 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC100) },
4855 /* Standard 14400 bps Modem */
4856 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC101) },
4857 /* Standard 28800 bps Modem*/
4858 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC102) },
4859 /* Standard Modem*/
4860 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC103) },
4861 /* Standard 9600 bps Modem*/
4862 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC104) },
4863 /* Standard 14400 bps Modem*/
4864 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC105) },
4865 /* Standard 28800 bps Modem*/
4866 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC106) },
4867 /* Standard Modem */
4868 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC107) },
4869 /* Standard 9600 bps Modem */
4870 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC108) },
4871 /* Standard 14400 bps Modem */
4872 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC109) },
4873 /* Standard 28800 bps Modem */
4874 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10A) },
4875 /* Standard Modem */
4876 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10B) },
4877 /* Standard 9600 bps Modem */
4878 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10C) },
4879 /* Standard 14400 bps Modem */
4880 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10D) },
4881 /* Standard 28800 bps Modem */
4882 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10E) },
4883 /* Standard Modem */
4884 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10F) },
4885 /* Standard PCMCIA Card Modem */
4886 { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x2000) },
4887 /* Rockwell */
4888 /* Modular Technology */
4889 /* Rockwell 33.6 DPF Internal PnP */
4890 /* Modular Technology 33.6 Internal PnP */
4891 { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0030) },
4892 /* Kortex International */
4893 /* KORTEX 14400 Externe PnP */
4894 { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0100) },
4895 /* Viking Components, Inc */
4896 /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
4897 { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x4920) },
4898 /* Rockwell */
4899 /* British Telecom */
4900 /* Modular Technology */
4901 /* Rockwell 33.6 DPF External PnP */
4902 /* BT Prologue 33.6 External PnP */
4903 /* Modular Technology 33.6 External PnP */
4904 { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x00A0) },
4905 /* Viking 56K FAX INT */
4906 { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x0262) },
4907 /* SupraExpress 28.8 Data/Fax PnP modem */
4908 { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1310) },
4909 /* SupraExpress 33.6 Data/Fax PnP modem */
4910 { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1421) },
4911 /* SupraExpress 33.6 Data/Fax PnP modem */
4912 { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1590) },
4913 /* SupraExpress 33.6 Data/Fax PnP modem */
4914 { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1760) },
4915 /* Phoebe Micro */
4916 /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
4917 { ISAPNP_VENDOR('T', 'E', 'X'), ISAPNP_DEVICE(0x0011) },
4918 /* Archtek America Corp. */
4919 /* Archtek SmartLink Modem 3334BT Plug & Play */
4920 { ISAPNP_VENDOR('U', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
4921 /* 3Com Corp. */
4922 /* Gateway Telepath IIvi 33.6 */
4923 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0000) },
4924 /* Sportster Vi 14.4 PnP FAX Voicemail */
4925 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0004) },
4926 /* U.S. Robotics 33.6K Voice INT PnP */
4927 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0006) },
4928 /* U.S. Robotics 33.6K Voice EXT PnP */
4929 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0007) },
4930 /* U.S. Robotics 33.6K Voice INT PnP */
4931 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2002) },
4932 /* U.S. Robotics 56K Voice INT PnP */
4933 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2070) },
4934 /* U.S. Robotics 56K Voice EXT PnP */
4935 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2080) },
4936 /* U.S. Robotics 56K FAX INT */
4937 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3031) },
4938 /* U.S. Robotics 56K Voice INT PnP */
4939 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3070) },
4940 /* U.S. Robotics 56K Voice EXT PnP */
4941 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3080) },
4942 /* U.S. Robotics 56K Voice INT PnP */
4943 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3090) },
4944 /* U.S. Robotics 56K Message */
4945 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9100) },
4946 /* U.S. Robotics 56K FAX EXT PnP*/
4947 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9160) },
4948 /* U.S. Robotics 56K FAX INT PnP*/
4949 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9170) },
4950 /* U.S. Robotics 56K Voice EXT PnP*/
4951 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9180) },
4952 /* U.S. Robotics 56K Voice INT PnP*/
4953 { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9190) },
4954 { 0, }
4955 };
4956
4957 static void inline avoid_irq_share(struct pci_dev *dev)
4958 {
4959 int i, map = 0x1FF8;
4960 struct serial_state *state = rs_table;
4961 struct isapnp_irq *irq;
4962 struct isapnp_resources *res = dev->sysdata;
4963
4964 for (i = 0; i < NR_PORTS; i++) {
4965 if (state->type != PORT_UNKNOWN)
4966 clear_bit(state->irq, &map);
4967 state++;
4968 }
4969
4970 for ( ; res; res = res->alt)
4971 for(irq = res->irq; irq; irq = irq->next)
4972 irq->map = map;
4973 }
4974
4975 static char *modem_names[] __initdata = {
4976 "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
4977 "56K", "56k", "K56", "33.6", "28.8", "14.4",
4978 "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
4979 "33600", "28800", "14400", "V.90", "V.34", "V.32", 0
4980 };
4981
4982 static int __init check_name(char *name)
4983 {
4984 char **tmp = modem_names;
4985
4986 while (*tmp) {
4987 if (strstr(name, *tmp))
4988 return 1;
4989 tmp++;
4990 }
4991 return 0;
4992 }
4993
4994 static int inline check_compatible_id(struct pci_dev *dev)
4995 {
4996 int i;
4997 for (i = 0; i < DEVICE_COUNT_COMPATIBLE; i++)
4998 if ((dev->vendor_compatible[i] ==
4999 ISAPNP_VENDOR('P', 'N', 'P')) &&
5000 (swab16(dev->device_compatible[i]) >= 0xc000) &&
5001 (swab16(dev->device_compatible[i]) <= 0xdfff))
5002 return 0;
5003 return 1;
5004 }
5005
5006 /*
5007 * Given a complete unknown ISA PnP device, try to use some heuristics to
5008 * detect modems. Currently use such heuristic set:
5009 * - dev->name or dev->bus->name must contain "modem" substring;
5010 * - device must have only one IO region (8 byte long) with base adress
5011 * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
5012 *
5013 * Such detection looks very ugly, but can detect at least some of numerous
5014 * ISA PnP modems, alternatively we must hardcode all modems in pnp_devices[]
5015 * table.
5016 */
5017 static int _INLINE_ serial_pnp_guess_board(struct pci_dev *dev,
5018 struct pci_board *board)
5019 {
5020 struct isapnp_resources *res = (struct isapnp_resources *)dev->sysdata;
5021 struct isapnp_resources *resa;
5022
5023 if (!(check_name(dev->name) || check_name(dev->bus->name)) &&
5024 !(check_compatible_id(dev)))
5025 return 1;
5026
5027 if (!res || res->next)
5028 return 1;
5029
5030 for (resa = res->alt; resa; resa = resa->alt) {
5031 struct isapnp_port *port;
5032 for (port = res->port; port; port = port->next)
5033 if ((port->size == 8) &&
5034 ((port->min == 0x2f8) ||
5035 (port->min == 0x3f8) ||
5036 (port->min == 0x2e8) ||
5037 (port->min == 0x3e8)))
5038 return 0;
5039 }
5040
5041 return 1;
5042 }
5043
5044 static void __init probe_serial_pnp(void)
5045 {
5046 struct pci_dev *dev = NULL;
5047 struct pnp_board *pnp_board;
5048 struct pci_board board;
5049
5050 #ifdef SERIAL_DEBUG_PNP
5051 printk("Entered probe_serial_pnp()\n");
5052 #endif
5053 if (!isapnp_present()) {
5054 #ifdef SERIAL_DEBUG_PNP
5055 printk("Leaving probe_serial_pnp() (no isapnp)\n");
5056 #endif
5057 return;
5058 }
5059
5060 isapnp_for_each_dev(dev) {
5061 if (dev->active)
5062 continue;
5063
5064 memset(&board, 0, sizeof(board));
5065 board.flags = SPCI_FL_BASE0 | SPCI_FL_PNPDEFAULT;
5066 board.num_ports = 1;
5067 board.base_baud = 115200;
5068
5069 for (pnp_board = pnp_devices; pnp_board->vendor; pnp_board++)
5070 if ((dev->vendor == pnp_board->vendor) &&
5071 (dev->device == pnp_board->device))
5072 break;
5073
5074 if (pnp_board->vendor) {
5075 board.vendor = pnp_board->vendor;
5076 board.device = pnp_board->device;
5077 /* Special case that's more efficient to hardcode */
5078 if ((board.vendor == ISAPNP_VENDOR('A', 'K', 'Y') &&
5079 board.device == ISAPNP_DEVICE(0x1021)))
5080 board.flags |= SPCI_FL_NO_SHIRQ;
5081 } else {
5082 if (serial_pnp_guess_board(dev, &board))
5083 continue;
5084 }
5085
5086 if (board.flags & SPCI_FL_NO_SHIRQ)
5087 avoid_irq_share(dev);
5088 start_pci_pnp_board(dev, &board);
5089 }
5090
5091 #ifdef SERIAL_DEBUG_PNP
5092 printk("Leaving probe_serial_pnp() (probe finished)\n");
5093 #endif
5094 return;
5095 }
5096
5097 #endif /* ENABLE_SERIAL_PNP */
5098
5099 /*
5100 * The serial driver boot-time initialization code!
5101 */
5102 static int __init rs_init(void)
5103 {
5104 int i;
5105 struct serial_state * state;
5106
5107 init_bh(SERIAL_BH, do_serial_bh);
5108 init_timer(&serial_timer);
5109 serial_timer.function = rs_timer;
5110 mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
5111
5112 for (i = 0; i < NR_IRQS; i++) {
5113 IRQ_ports[i] = 0;
5114 IRQ_timeout[i] = 0;
5115 #ifdef CONFIG_SERIAL_MULTIPORT
5116 memset(&rs_multiport[i], 0,
5117 sizeof(struct rs_multiport_struct));
5118 #endif
5119 }
5120 #ifdef CONFIG_SERIAL_CONSOLE
5121 /*
5122 * The interrupt of the serial console port
5123 * can't be shared.
5124 */
5125 if (sercons.flags & CON_CONSDEV) {
5126 for(i = 0; i < NR_PORTS; i++)
5127 if (i != sercons.index &&
5128 rs_table[i].irq == rs_table[sercons.index].irq)
5129 rs_table[i].irq = 0;
5130 }
5131 #endif
5132 show_serial_version();
5133
5134 /* Initialize the tty_driver structure */
5135
5136 memset(&serial_driver, 0, sizeof(struct tty_driver));
5137 serial_driver.magic = TTY_DRIVER_MAGIC;
5138 #if (LINUX_VERSION_CODE > 0x20100)
5139 serial_driver.driver_name = "serial";
5140 #endif
5141 #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
5142 serial_driver.name = "tts/%d";
5143 #else
5144 serial_driver.name = "ttyS";
5145 #endif
5146 serial_driver.major = TTY_MAJOR;
5147 serial_driver.minor_start = 64 + SERIAL_DEV_OFFSET;
5148 serial_driver.num = NR_PORTS;
5149 serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
5150 serial_driver.subtype = SERIAL_TYPE_NORMAL;
5151 serial_driver.init_termios = tty_std_termios;
5152 serial_driver.init_termios.c_cflag =
5153 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
5154 serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
5155 serial_driver.refcount = &serial_refcount;
5156 serial_driver.table = serial_table;
5157 serial_driver.termios = serial_termios;
5158 serial_driver.termios_locked = serial_termios_locked;
5159
5160 serial_driver.open = rs_open;
5161 serial_driver.close = rs_close;
5162 serial_driver.write = rs_write;
5163 serial_driver.put_char = rs_put_char;
5164 serial_driver.flush_chars = rs_flush_chars;
5165 serial_driver.write_room = rs_write_room;
5166 serial_driver.chars_in_buffer = rs_chars_in_buffer;
5167 serial_driver.flush_buffer = rs_flush_buffer;
5168 serial_driver.ioctl = rs_ioctl;
5169 serial_driver.throttle = rs_throttle;
5170 serial_driver.unthrottle = rs_unthrottle;
5171 serial_driver.set_termios = rs_set_termios;
5172 serial_driver.stop = rs_stop;
5173 serial_driver.start = rs_start;
5174 serial_driver.hangup = rs_hangup;
5175 #if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
5176 serial_driver.break_ctl = rs_break;
5177 #endif
5178 #if (LINUX_VERSION_CODE >= 131343)
5179 serial_driver.send_xchar = rs_send_xchar;
5180 serial_driver.wait_until_sent = rs_wait_until_sent;
5181 serial_driver.read_proc = rs_read_proc;
5182 #endif
5183
5184 /*
5185 * The callout device is just like normal device except for
5186 * major number and the subtype code.
5187 */
5188 callout_driver = serial_driver;
5189 #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
5190 callout_driver.name = "cua/%d";
5191 #else
5192 callout_driver.name = "cua";
5193 #endif
5194 callout_driver.major = TTYAUX_MAJOR;
5195 callout_driver.subtype = SERIAL_TYPE_CALLOUT;
5196 #if (LINUX_VERSION_CODE >= 131343)
5197 callout_driver.read_proc = 0;
5198 callout_driver.proc_entry = 0;
5199 #endif
5200
5201 if (tty_register_driver(&serial_driver))
5202 panic("Couldn't register serial driver\n");
5203 if (tty_register_driver(&callout_driver))
5204 panic("Couldn't register callout driver\n");
5205
5206 for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
5207 state->magic = SSTATE_MAGIC;
5208 state->line = i;
5209 state->type = PORT_UNKNOWN;
5210 state->custom_divisor = 0;
5211 state->close_delay = 5*HZ/10;
5212 state->closing_wait = 30*HZ;
5213 state->callout_termios = callout_driver.init_termios;
5214 state->normal_termios = serial_driver.init_termios;
5215 state->icount.cts = state->icount.dsr =
5216 state->icount.rng = state->icount.dcd = 0;
5217 state->icount.rx = state->icount.tx = 0;
5218 state->icount.frame = state->icount.parity = 0;
5219 state->icount.overrun = state->icount.brk = 0;
5220 state->irq = irq_cannonicalize(state->irq);
5221 if (state->hub6)
5222 state->io_type = SERIAL_IO_HUB6;
5223 if (state->port && check_region(state->port,8))
5224 continue;
5225 if (state->flags & ASYNC_BOOT_AUTOCONF)
5226 autoconfig(state);
5227 }
5228 for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
5229 if (state->type == PORT_UNKNOWN)
5230 continue;
5231 if ( (state->flags & ASYNC_BOOT_AUTOCONF)
5232 && (state->flags & ASYNC_AUTO_IRQ)
5233 && (state->port != 0))
5234 state->irq = detect_uart_irq(state);
5235 printk(KERN_INFO "ttyS%02d%s at 0x%04lx (irq = %d) is a %s\n",
5236 state->line + SERIAL_DEV_OFFSET,
5237 (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
5238 state->port, state->irq,
5239 uart_config[state->type].name);
5240 tty_register_devfs(&serial_driver, 0,
5241 serial_driver.minor_start + state->line);
5242 tty_register_devfs(&callout_driver, 0,
5243 callout_driver.minor_start + state->line);
5244 }
5245 #ifdef ENABLE_SERIAL_PCI
5246 probe_serial_pci();
5247 #endif
5248 #ifdef ENABLE_SERIAL_PNP
5249 probe_serial_pnp();
5250 #endif
5251 return 0;
5252 }
5253
5254 /*
5255 * register_serial and unregister_serial allows for 16x50 serial ports to be
5256 * configured at run-time, to support PCMCIA modems.
5257 */
5258
5259 /**
5260 * register_serial - configure a 16x50 serial port at runtime
5261 * @req: request structure
5262 *
5263 * Configure the serial port specified by the request. If the
5264 * port exists and is in use an error is returned. If the port
5265 * is not currently in the table it is added.
5266 *
5267 * The port is then probed and if neccessary the IRQ is autodetected
5268 * If this fails an error is returned.
5269 *
5270 * On success the port is ready to use and the line number is returned.
5271 */
5272
5273 int register_serial(struct serial_struct *req)
5274 {
5275 int i;
5276 unsigned long flags;
5277 struct serial_state *state;
5278 struct async_struct *info;
5279 unsigned long port;
5280
5281 port = req->port;
5282 if (HIGH_BITS_OFFSET)
5283 port += (unsigned long) req->port_high << HIGH_BITS_OFFSET;
5284
5285 save_flags(flags); cli();
5286 for (i = 0; i < NR_PORTS; i++) {
5287 if ((rs_table[i].port == port) &&
5288 (rs_table[i].iomem_base == req->iomem_base))
5289 break;
5290 }
5291 if (i == NR_PORTS) {
5292 for (i = 0; i < NR_PORTS; i++)
5293 if ((rs_table[i].type == PORT_UNKNOWN) &&
5294 (rs_table[i].count == 0))
5295 break;
5296 }
5297 if (i == NR_PORTS) {
5298 restore_flags(flags);
5299 return -1;
5300 }
5301 state = &rs_table[i];
5302 if (rs_table[i].count) {
5303 restore_flags(flags);
5304 printk("Couldn't configure serial #%d (port=%ld,irq=%d): "
5305 "device already open\n", i, port, req->irq);
5306 return -1;
5307 }
5308 state->irq = req->irq;
5309 state->port = port;
5310 state->flags = req->flags;
5311 state->io_type = req->io_type;
5312 state->iomem_base = req->iomem_base;
5313 state->iomem_reg_shift = req->iomem_reg_shift;
5314 if (req->baud_base)
5315 state->baud_base = req->baud_base;
5316 if ((info = state->info) != NULL) {
5317 info->port = port;
5318 info->flags = req->flags;
5319 info->io_type = req->io_type;
5320 info->iomem_base = req->iomem_base;
5321 info->iomem_reg_shift = req->iomem_reg_shift;
5322 }
5323 autoconfig(state);
5324 if (state->type == PORT_UNKNOWN) {
5325 restore_flags(flags);
5326 printk("register_serial(): autoconfig failed\n");
5327 return -1;
5328 }
5329 restore_flags(flags);
5330
5331 if ((state->flags & ASYNC_AUTO_IRQ) && CONFIGURED_SERIAL_PORT(state))
5332 state->irq = detect_uart_irq(state);
5333
5334 printk(KERN_INFO "ttyS%02d at %s 0x%04lx (irq = %d) is a %s\n",
5335 state->line + SERIAL_DEV_OFFSET,
5336 state->iomem_base ? "iomem" : "port",
5337 state->iomem_base ? (unsigned long)state->iomem_base :
5338 state->port, state->irq, uart_config[state->type].name);
5339 tty_register_devfs(&serial_driver, 0,
5340 serial_driver.minor_start + state->line);
5341 tty_register_devfs(&callout_driver, 0,
5342 callout_driver.minor_start + state->line);
5343 return state->line + SERIAL_DEV_OFFSET;
5344 }
5345
5346 /**
5347 * unregister_serial - deconfigure a 16x50 serial port
5348 * @line: line to deconfigure
5349 *
5350 * The port specified is deconfigured and its resources are freed. Any
5351 * user of the port is disconnected as if carrier was dropped. Line is
5352 * the port number returned by register_serial().
5353 */
5354
5355 void unregister_serial(int line)
5356 {
5357 unsigned long flags;
5358 struct serial_state *state = &rs_table[line];
5359
5360 save_flags(flags); cli();
5361 if (state->info && state->info->tty)
5362 tty_hangup(state->info->tty);
5363 state->type = PORT_UNKNOWN;
5364 printk(KERN_INFO "tty%02d unloaded\n", state->line);
5365 /* These will be hidden, because they are devices that will no longer
5366 * be available to the system. (ie, PCMCIA modems, once ejected)
5367 */
5368 tty_unregister_devfs(&serial_driver,
5369 serial_driver.minor_start + state->line);
5370 tty_unregister_devfs(&callout_driver,
5371 callout_driver.minor_start + state->line);
5372 restore_flags(flags);
5373 }
5374
5375 static void __exit rs_fini(void)
5376 {
5377 unsigned long flags;
5378 int e1, e2;
5379 int i;
5380 struct async_struct *info;
5381
5382 /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
5383 del_timer_sync(&serial_timer);
5384 save_flags(flags); cli();
5385 remove_bh(SERIAL_BH);
5386 if ((e1 = tty_unregister_driver(&serial_driver)))
5387 printk("serial: failed to unregister serial driver (%d)\n",
5388 e1);
5389 if ((e2 = tty_unregister_driver(&callout_driver)))
5390 printk("serial: failed to unregister callout driver (%d)\n",
5391 e2);
5392 restore_flags(flags);
5393
5394 for (i = 0; i < NR_PORTS; i++) {
5395 if ((info = rs_table[i].info)) {
5396 rs_table[i].info = NULL;
5397 kfree(info);
5398 }
5399 if ((rs_table[i].type != PORT_UNKNOWN) && rs_table[i].port) {
5400 #ifdef CONFIG_SERIAL_RSA
5401 if (rs_table[i].type == PORT_RSA)
5402 release_region(rs_table[i].port +
5403 UART_RSA_BASE, 16);
5404 else
5405 #endif
5406 release_region(rs_table[i].port, 8);
5407 }
5408 #if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
5409 if (rs_table[i].iomem_base)
5410 iounmap(rs_table[i].iomem_base);
5411 #endif
5412 }
5413 #if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
5414 for (i=0; i < serial_pci_board_idx; i++) {
5415 struct pci_board_inst *brd = &serial_pci_board[i];
5416
5417 if (brd->board.init_fn)
5418 (brd->board.init_fn)(brd->dev, &brd->board, 0);
5419
5420 if (DEACTIVATE_FUNC(brd->dev))
5421 (DEACTIVATE_FUNC(brd->dev))(brd->dev);
5422 }
5423 #endif
5424 if (tmp_buf) {
5425 unsigned long pg = (unsigned long) tmp_buf;
5426 tmp_buf = NULL;
5427 free_page(pg);
5428 }
5429 }
5430
5431 module_init(rs_init);
5432 module_exit(rs_fini);
5433 MODULE_DESCRIPTION("Standard/generic (dumb) serial driver");
5434 MODULE_AUTHOR("Theodore Ts'o <tytso@mit.edu>");
5435
5436
5437 /*
5438 * ------------------------------------------------------------
5439 * Serial console driver
5440 * ------------------------------------------------------------
5441 */
5442 #ifdef CONFIG_SERIAL_CONSOLE
5443
5444 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
5445
5446 static struct async_struct async_sercons;
5447
5448 /*
5449 * Wait for transmitter & holding register to empty
5450 */
5451 static inline void wait_for_xmitr(struct async_struct *info)
5452 {
5453 unsigned int status, tmout = 1000000;
5454
5455 do {
5456 status = serial_in(info, UART_LSR);
5457
5458 if (status & UART_LSR_BI)
5459 lsr_break_flag = UART_LSR_BI;
5460
5461 if (--tmout == 0)
5462 break;
5463 } while((status & BOTH_EMPTY) != BOTH_EMPTY);
5464 }
5465
5466
5467 /*
5468 * Print a string to the serial port trying not to disturb
5469 * any possible real use of the port...
5470 *
5471 * The console_lock must be held when we get here.
5472 */
5473 static void serial_console_write(struct console *co, const char *s,
5474 unsigned count)
5475 {
5476 static struct async_struct *info = &async_sercons;
5477 int ier;
5478 unsigned i;
5479
5480 /*
5481 * First save the IER then disable the interrupts
5482 */
5483 ier = serial_in(info, UART_IER);
5484 serial_out(info, UART_IER, 0x00);
5485
5486 /*
5487 * Now, do each character
5488 */
5489 for (i = 0; i < count; i++, s++) {
5490 wait_for_xmitr(info);
5491
5492 /*
5493 * Send the character out.
5494 * If a LF, also do CR...
5495 */
5496 serial_out(info, UART_TX, *s);
5497 if (*s == 10) {
5498 wait_for_xmitr(info);
5499 serial_out(info, UART_TX, 13);
5500 }
5501 }
5502
5503 /*
5504 * Finally, Wait for transmitter & holding register to empty
5505 * and restore the IER
5506 */
5507 wait_for_xmitr(info);
5508 serial_out(info, UART_IER, ier);
5509 }
5510
5511 /*
5512 * Receive character from the serial port
5513 */
5514 static int serial_console_wait_key(struct console *co)
5515 {
5516 static struct async_struct *info;
5517 int ier, c;
5518
5519 info = &async_sercons;
5520
5521 /*
5522 * First save the IER then disable the interrupts so
5523 * that the real driver for the port does not get the
5524 * character.
5525 */
5526 ier = serial_in(info, UART_IER);
5527 serial_out(info, UART_IER, 0x00);
5528
5529 while ((serial_in(info, UART_LSR) & UART_LSR_DR) == 0);
5530 c = serial_in(info, UART_RX);
5531
5532 /*
5533 * Restore the interrupts
5534 */
5535 serial_out(info, UART_IER, ier);
5536
5537 return c;
5538 }
5539
5540 static kdev_t serial_console_device(struct console *c)
5541 {
5542 return MKDEV(TTY_MAJOR, 64 + c->index);
5543 }
5544
5545 /*
5546 * Setup initial baud/bits/parity. We do two things here:
5547 * - construct a cflag setting for the first rs_open()
5548 * - initialize the serial port
5549 * Return non-zero if we didn't find a serial port.
5550 */
5551 static int __init serial_console_setup(struct console *co, char *options)
5552 {
5553 static struct async_struct *info;
5554 struct serial_state *state;
5555 unsigned cval;
5556 int baud = 9600;
5557 int bits = 8;
5558 int parity = 'n';
5559 int cflag = CREAD | HUPCL | CLOCAL;
5560 int quot = 0;
5561 char *s;
5562
5563 if (options) {
5564 baud = simple_strtoul(options, NULL, 10);
5565 s = options;
5566 while(*s >= '0' && *s <= '9')
5567 s++;
5568 if (*s) parity = *s++;
5569 if (*s) bits = *s - '0';
5570 }
5571
5572 /*
5573 * Now construct a cflag setting.
5574 */
5575 switch(baud) {
5576 case 1200:
5577 cflag |= B1200;
5578 break;
5579 case 2400:
5580 cflag |= B2400;
5581 break;
5582 case 4800:
5583 cflag |= B4800;
5584 break;
5585 case 19200:
5586 cflag |= B19200;
5587 break;
5588 case 38400:
5589 cflag |= B38400;
5590 break;
5591 case 57600:
5592 cflag |= B57600;
5593 break;
5594 case 115200:
5595 cflag |= B115200;
5596 break;
5597 case 9600:
5598 default:
5599 cflag |= B9600;
5600 break;
5601 }
5602 switch(bits) {
5603 case 7:
5604 cflag |= CS7;
5605 break;
5606 default:
5607 case 8:
5608 cflag |= CS8;
5609 break;
5610 }
5611 switch(parity) {
5612 case 'o': case 'O':
5613 cflag |= PARODD;
5614 break;
5615 case 'e': case 'E':
5616 cflag |= PARENB;
5617 break;
5618 }
5619 co->cflag = cflag;
5620
5621 /*
5622 * Divisor, bytesize and parity
5623 */
5624 state = rs_table + co->index;
5625 info = &async_sercons;
5626 info->magic = SERIAL_MAGIC;
5627 info->state = state;
5628 info->port = state->port;
5629 info->flags = state->flags;
5630 #ifdef CONFIG_HUB6
5631 info->hub6 = state->hub6;
5632 #endif
5633 info->io_type = state->io_type;
5634 info->iomem_base = state->iomem_base;
5635 info->iomem_reg_shift = state->iomem_reg_shift;
5636 quot = state->baud_base / baud;
5637 cval = cflag & (CSIZE | CSTOPB);
5638 #if defined(__powerpc__) || defined(__alpha__)
5639 cval >>= 8;
5640 #else /* !__powerpc__ && !__alpha__ */
5641 cval >>= 4;
5642 #endif /* !__powerpc__ && !__alpha__ */
5643 if (cflag & PARENB)
5644 cval |= UART_LCR_PARITY;
5645 if (!(cflag & PARODD))
5646 cval |= UART_LCR_EPAR;
5647
5648 /*
5649 * Disable UART interrupts, set DTR and RTS high
5650 * and set speed.
5651 */
5652 serial_out(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
5653 serial_out(info, UART_DLL, quot & 0xff); /* LS of divisor */
5654 serial_out(info, UART_DLM, quot >> 8); /* MS of divisor */
5655 serial_out(info, UART_LCR, cval); /* reset DLAB */
5656 serial_out(info, UART_IER, 0);
5657 serial_out(info, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
5658
5659 /*
5660 * If we read 0xff from the LSR, there is no UART here.
5661 */
5662 if (serial_in(info, UART_LSR) == 0xff)
5663 return -1;
5664
5665 return 0;
5666 }
5667
5668 static struct console sercons = {
5669 name: "ttyS",
5670 write: serial_console_write,
5671 device: serial_console_device,
5672 wait_key: serial_console_wait_key,
5673 setup: serial_console_setup,
5674 flags: CON_PRINTBUFFER,
5675 index: -1,
5676 };
5677
5678 /*
5679 * Register console.
5680 */
5681 void __init serial_console_init(void)
5682 {
5683 register_console(&sercons);
5684 }
5685 #endif
5686
5687 /*
5688 Local variables:
5689 compile-command: "gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -march=i586 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -DEXPORT_SYMTAB -c serial.c"
5690 End:
5691 */
Copy of Dave Jones history.git as used by http://archive.org/details/git-history-of-linux