1 # SPDX-License-Identifier: GPL-2.0-only
4 ifeq ($(CONFIG_CCACHE
),y
)
6 CCACHE
:=$(word 1,$(wildcard $(addsuffix /ccache
,$(subst :, ,$(PATH
)))))
8 $(error ccache selected
, but not found in PATH
)
11 export CCACHE_COMPILERCHECK
=mtime
12 export CCACHE_BASEDIR
=$(top
)
13 export CCACHE_STATSLOG
=$(obj
)/ccache.stats
15 $(foreach arch
,$(ARCH_SUPPORTED
), \
16 $(eval CC_
$(arch
):=$(CCACHE
) $(CC_
$(arch
))))
18 HOSTCC
:=$(CCACHE
) $(HOSTCC
)
19 HOSTCXX
:=$(CCACHE
) $(HOSTCXX
)
22 # scan-build integration
23 ifneq ($(CCC_ANALYZER_OUTPUT_FORMAT
),)
25 ifeq ($(CCC_ANALYZER_ANALYSIS
),)
26 export CCC_ANALYZER_ANALYSIS
:= -analyzer-opt-analyze-headers
29 $(foreach arch
,$(ARCH_SUPPORTED
), \
30 $(eval CC_
$(arch
):=CCC_CC
="$(CC_$(arch))" $(CC
) ))
32 HOSTCC
:=CCC_CC
="$(HOSTCC)" $(CC
)
33 HOSTCXX
:=CCC_CXX
="$(HOSTCXX)" $(CXX
)
36 # include-what-you-use integration
37 ifeq ($(CONFIG_IWYU
),y
)
39 IWYU
:=$(word 1,$(wildcard $(addsuffix /iwyu
,$(subst :, ,$(PATH
)))))
41 $(error include-what-you-use selected
, but not found in PATH
)
44 $(foreach arch
,$(ARCH_SUPPORTED
), \
45 $(eval CC_
$(arch
):=$(IWYU
) ))
47 CFLAGS_common
:= -Xiwyu
--prefix_header_includes
=remove
-Xiwyu
--no_comments
-Xiwyu
--no_fwd_decls
$(CFLAGS_common
)
51 COREBOOT_STANDARD_STAGES
:= decompressor bootblock verstage romstage ramstage
52 MAP-decompressor
:= bootblock
58 ARCHDIR-arm64
:= arm64
59 ARCHDIR-riscv
:= riscv
60 ARCHDIR-ppc64
:= ppc64
63 CFLAGS_arm64
+= -mgeneral-regs-only
66 CFLAGS_x86_64
+= -mcmodel
=large
-mno-red-zone
70 GCC_ADAFLAGS_arm64
+= -mgeneral-regs-only
72 GCC_ADAFLAGS_x86_32
+=
73 GCC_ADAFLAGS_x86_64
+= -mcmodel
=large
-mno-red-zone
76 # Some boards only provide 2K stacks, so storing lots of data there leads to
77 # problems. Since C rules don't allow us to statically determine the maximum
78 # stack use, we use 1.5K as heuristic, assuming that we typically have lots
79 # of tiny stack frames and the odd large one.
81 # Store larger buffers in BSS, use static to share data in cache-as-ram
83 # Since GCCs detection of dynamic array bounds unfortunately seems to be
84 # very basic, you'll sometimes have to use a static upper bound for the
85 # size and an assert() to make sure it's honored (see gpio_base3_value()
87 # (If you absolutely need a larger stack frame and are 100% sure it cannot
88 # cause problems, you can whitelist it with #pragma diagnostic.)
89 ifeq ($(CONFIG_COMPILER_GCC
),y
)
90 CFLAGS_arm
+= -Wstack-usage
=1536
91 CFLAGS_arm64
+= -Wstack-usage
=1536
92 CFLAGS_riscv
+= -Wstack-usage
=1536
93 CFLAGS_ppc64
+= -Wstack-usage
=1536
97 $(foreach arch
,$(ARCH_SUPPORTED
),\
98 $(eval CPPFLAGS_
$(arch
) += \
99 -Isrc
/arch
/$(ARCHDIR-
$(arch
))/include))
101 # set_stage_toolchain: Decides the toolchain to be used by every stage
102 # E.g.: If bootblock is x86_32, it sets ARCH-BOOTBLOCK-y = x86_32, whereas
103 # ARCH-BOOTBLOCK-n = armv7. Then, ARCH-BOOTBLOCK-y can be used anywhere to
104 # decide the compiler toolchain for bootblock stage
105 # This step is essential for initializing the toolchain for coreboot standard
106 # stages i.e. bootblock, romstage and ramstage, since it acts as the second
107 # parameter to create_class_compiler below in init_standard_toolchain
108 map_stage
= $(strip $(if
$(MAP-
$(1)),$(MAP-
$(1)),$(1)))
109 set_stage_toolchain
= \
110 $(foreach arch
,$(ARCH_SUPPORTED
), \
111 $(eval ARCH-
$(1)-$($(shell \
112 echo CONFIG_ARCH_
$(call map_stage
,$(1))_
$(arch
) | \
113 tr
'[:lower:]' '[:upper:]')) := $(arch
)))
115 # standard-archs: Tell which architectures are used by the standard stages.
116 standard-archs
= $(sort $(foreach stagearch
, \
117 $(patsubst %,ARCH-
%-y
,$(COREBOOT_STANDARD_STAGES
)), \
120 # create_class_compiler: Used to create compiler tool set for
123 # @2: compiler set to be used
124 # e.g.: smm special class uses i386 as compiler set
125 define create_class_compiler
126 $(if
$(2),,$(warning
*** The toolchain architecture for
$(1) is unknown.
) \
127 $(warning CONFIG_ARCH_
$(1)_
* settings in
$(DOTCONFIG
):) \
128 $(error
$(shell grep CONFIG_ARCH_
$(1)_
$(DOTCONFIG
))))
129 CC_
$(1) := $(CC_
$(2))
130 GCC_
$(1) := $(GCC_CC_
$(2))
131 LD_
$(1) := $(LD_
$(2))
132 NM_
$(1) := $(NM_
$(2))
133 AR_
$(1) := $(AR_
$(2))
134 GNATBIND_
$(1) := $(GNATBIND_
$(2))
135 OBJCOPY_
$(1) := $(OBJCOPY_
$(2))
136 OBJDUMP_
$(1) := $(OBJDUMP_
$(2))
137 STRIP_
$(1) := $(STRIP_
$(2))
138 READELF_
$(1) := $(READELF_
$(2))
139 CFLAGS_
$(1) = $$(CFLAGS_common
) $$(CFLAGS_
$(2))
140 ADAFLAGS_
$(1) = --RTS
=$$(obj
)/libgnat-
$(2)/ $$(ADAFLAGS_common
) $$(GCC_ADAFLAGS_
$(2))
141 CPPFLAGS_
$(1) = $$(CPPFLAGS_common
) $$(CPPFLAGS_
$(2)) -D__ARCH_
$(2)__
142 COMPILER_RT_
$(1) := $$(COMPILER_RT_
$(2))
143 COMPILER_RT_FLAGS_
$(1) := $$(COMPILER_RT_FLAGS_
$(2))
144 LDFLAGS_
$(1) = $$(LDFLAGS_common
) $$(LDFLAGS_
$(2))
147 # define_class: Allows defining any program as dynamic class and compiler tool
148 # set for the same based on the architecture for which the program is to be
150 # @1: program (class name)
151 # @2: architecture for which the program needs to be compiled
152 # IMP: Ensure that define_class is called before any .c or .S files are added to
153 # the class of the program. Check subdirs-y for order of subdirectory inclusions
156 $(eval
$(call create_class_compiler
,$(1),$(2)))
159 # initialize standard toolchain (CC,AS and others) for give stage
160 # @1 : stage for which the toolchain is to be initialized
161 init_standard_toolchain
= \
162 $(eval
$(call set_stage_toolchain
,$(1))) \
163 $(eval
$(call create_class_compiler
,$(1),$(ARCH-
$(1)-y
)))
166 $(foreach stage
,$(COREBOOT_STANDARD_STAGES
), \
167 $(eval
$(call init_standard_toolchain
,$(stage
))))
169 $(eval
$(call toolchain_to_dir
))
173 # Test for coreboot toolchain (except when explicitly not requested)
174 ifneq ($(NOCOMPILE
),1)
175 # Only run if we're doing a build (not for tests, kconfig, ...)
176 # rationale: gcc versions by Linux distributions tend to be quite messed up
177 # llvm/clang also needs patches supplied by the coreboot build
181 ifneq ($(CONFIG_ANY_TOOLCHAIN
),y
)
182 # Verify that the coreboot toolchain is being used.
183 $(foreach arch
,$(sort $(foreach stage
,\
184 $(COREBOOT_STANDARD_STAGES
),$(ARCH-
$(stage
)-y
))), \
185 $(if
$(shell if
[ -n
"$(CC_$(arch))" ]; then \
186 $(CC_
$(arch
)) -v
2>&1 | grep
-q
"coreboot toolchain" || \
187 echo not-coreboot
; else echo not-coreboot
; fi
), \
188 $(eval COMPILERFAIL
:=1)\
189 $(warning The coreboot toolchain for
'$(arch)'\
190 architecture was not found.
)))
191 # If iasl doesn't match the current coreboot version, fail the test
192 # TODO: Figure out if iasl is even needed for the build.
193 $(if
$(shell if
[ -n
"$(IASL)" ]; then \
194 $(IASL
) -v
2>&1 | grep
-q
"coreboot toolchain" || \
195 echo not-coreboot
; else echo not-coreboot
; fi
), \
196 $(eval COMPILERFAIL
:=1)$(eval IASLFAIL
:=1)\
197 $(warning The coreboot toolchain version of iasl \
198 '$(shell util/crossgcc/buildgcc -s iasl)' was not found
))
199 else #$(CONFIG_ANY_TOOLCHAIN)
200 # If the coreboot toolchain isn't being used, verify that there is A toolchain
201 $(foreach arch
,$(sort \
202 $(foreach stage
,$(COREBOOT_STANDARD_STAGES
),$(ARCH-
$(stage
)-y
))), \
203 $(if
$(CC_
$(arch
)),, $(eval COMPILERFAIL
:=1) \
204 $(warning No compiler found for
'$(arch)' architecture. \
205 Install one or use the coreboot toolchain?
)) )
206 # If iasl isn't present, fail
207 # TODO: Figure out if iasl is even needed for the build.
208 $(if
$(IASL
),, $(eval COMPILERFAIL
:=1)$(eval IASLFAIL
:=1) \
209 $(warning iasl not found. \
210 Please
install it or use the coreboot toolchain.
))
213 # If the compiler check failed, print out warnings
214 ifeq ($(COMPILERFAIL
),1)
217 $(warning Path to your toolchain is currently set to
'$(XGCCPATH)')
220 $(warning To build the entire coreboot toolchain
: run
'make crossgcc')
222 $(warning To build just IASL
: run
'make iasl')
223 endif #($(IASLFAIL),1)
224 $(warning For more toolchain build targets
: run
'make help_toolchain')
226 ifneq ($(CONFIG_ANY_TOOLCHAIN
),y
)
227 $(warning To try to use any toolchain in your path
, \
228 run
'make menuconfig', then select
)
229 $(warning the config option
: 'General setup', \
230 and
'Allow building with any toolchain')
231 $(warning Note that this is NOT supported. \
232 Using it means you
're on your own.)
234 endif #($(CONFIG_ANY_TOOLCHAIN),y)
235 $(error Halting the build)
236 endif #($(COMPILERFAIL),1)
238 endif #($(NOCOMPILE),1)
240 # Run the toolchain version checks if the requested target is 'test-toolchain
'
241 # Checks the versions of GCC, binutils, clang, and IASL
242 ifneq ($(MAKECMDGOALS),)
243 ifneq ($(filter test-toolchain,$(MAKECMDGOALS)),)
244 $(foreach arch, $(ARCH_SUPPORTED), \
245 $(if $(shell if [ -n "$(GCC_CC_$(arch))" ]; then \
246 $(GCC_CC_$(arch)) --version 2>&1 | head -n1 | rev | \
247 cut -d ' ' -f 1 | rev | \
248 grep -q "$$(util/crossgcc/buildgcc -s gcc)" || \
249 echo not-current; fi), \
250 $(eval COMPILER_OUT_OF_DATE:=1) \
251 $(warning The coreboot toolchain version of gcc for '$(arch
)' \
252 architecture is not the current version.) \
253 $(warning $(arch) gcc version from buildgcc: \
254 $(shell util/crossgcc/buildgcc -s gcc)) \
255 $(warning $(arch) version of gcc executable: \
256 $(shell $(GCC_CC_$(arch)) --version | head -n1 | \
257 rev | cut -d ' ' -f 1 | rev))) \
258 $(if $(shell if [ -n "$(CLANG_CC_$(arch))" ]; then \
259 $(CLANG_CC_$(arch)) --version 2>&1 | \
260 sed 's
/.
*clang version
/clang version
/' | \
261 head -n1 | cut -d ' ' -f 3 | \
262 grep -q "$(shell util/crossgcc/buildgcc -s clang)" || \
263 echo not-current; fi), \
264 $(eval COMPILER_OUT_OF_DATE:=1) \
265 $(warning The coreboot toolchain version of clang for \
266 '$(arch
)' architecture is not the current version.) \
267 $(warning $(arch) clang version from buildgcc: \
268 $(shell util/crossgcc/buildgcc -s clang)) \
269 $(warning $(arch) version of clang executable: \
270 $(shell $(CLANG_CC_$(arch)) --version 2>&1 | \
271 sed 's
/.
*clang version
/clang version
/' | \
272 head -n1 | cut -d ' ' -f 3))) \
273 $(if $(shell if [ "$(OBJDUMP_$(arch))" != "invalidobjdump" ]; then \
274 $(OBJDUMP_$(arch)) -v 2>&1 | \
275 grep -q "$(shell util/crossgcc/buildgcc -s binutils)" || \
276 echo not-current; fi), \
277 $(eval COMPILER_OUT_OF_DATE:=1)\
278 $(warning The coreboot toolchain version of binutils for \
279 '$(arch
)' architecture is not the current version.)) \
281 $(if $(shell if [ -n "$(IASL)" ]; then $(IASL) -v 2>&1 | \
282 grep -q "$(shell util/crossgcc/buildgcc -s iasl)" || \
283 echo not-coreboot; fi), \
284 $(eval COMPILER_OUT_OF_DATE:=1)\
285 $(warning The coreboot toolchain version of iasl \
286 is not the current version) \
287 $(warning $(arch) iasl version from buildgcc: \
288 $(shell util/crossgcc/buildgcc -s iasl)) \
289 $(warning $(arch) version of iasl executable: \
290 $(shell $(IASL) -v 2>&1 | \
291 grep ASL+ | rev | cut -f 1 -d ' ' | rev)))
292 $(eval UPDATED_SUBMODULES:=1)
293 endif #($(filter crossgcc_check%,$(MAKECMDGOALS)),)
294 endif #($(MAKECMDGOALS),)