lenovo: Handle EEPROM/RFID chip.

[coreboot.git] / src / mainboard / lenovo / x60 / devicetree.cb

##
## This file is part of the coreboot project.
##
## Copyright (C) 2007-2009 coresystems GmbH
## Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
##
## This program is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; version 2 of
## the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
## MA 02110-1301 USA
##

chip northbridge/intel/i945

        device cpu_cluster 0 on
                chip cpu/intel/socket_mFCPGA478
                        device lapic 0 on end
                end
        end

        device domain 0 on
                device pci 00.0 on # Host bridge
                        subsystemid 0x17aa 0x2017
                end
                device pci 02.0 on # VGA controller
                        subsystemid 0x17aa 0x201a
                end
                device pci 02.1 on # display controller
                        subsystemid 0x17aa 0x201a
                end
                chip southbridge/intel/i82801gx
                        register "pirqa_routing" = "0x0b"
                        register "pirqb_routing" = "0x0b"
                        register "pirqc_routing" = "0x0b"
                        register "pirqd_routing" = "0x0b"
                        register "pirqe_routing" = "0x0b"
                        register "pirqf_routing" = "0x0b"
                        register "pirqg_routing" = "0x0b"
                        register "pirqh_routing" = "0x0b"

                        # GPI routing
                        #  0 No effect (default)
                        #  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
                        #  2 SCI (if corresponding GPIO_EN bit is also set)
                        register "gpi13_routing" = "2"
                        register "gpi12_routing" = "1"
                        register "gpi8_routing" = "2"

                        register "sata_ahci" = "0x1"
                        register "sata_ports_implemented" = "0x01"

                        register "gpe0_en" = "0x11000006"
                        register "alt_gp_smi_en" = "0x1000"

                        register "c4onc3_enable" = "1"
                        device pci 1b.0 on # Audio Cnotroller
                                subsystemid 0x17aa 0x2010
                        end
                        device pci 1c.0 on end # Ethernet
                        device pci 1c.1 on end # Atheros WLAN
                        device pci 1d.0 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.1 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.2 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.3 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.7 on # USB2 EHCI
                                subsystemid 0x17aa 0x200b
                        end
                        device pci 1f.0 on # PCI-LPC bridge
                                subsystemid 0x17aa 0x2009
                                chip ec/lenovo/pmh7
                                        device pnp ff.1 on # dummy
                                        end
                                        register "backlight_enable" = "0x01"
                                        register "dock_event_enable" = "0x01"
                                end
                                chip ec/lenovo/h8
                                        device pnp ff.2 on # dummy
                                                io 0x60 = 0x62
                                                io 0x62 = 0x66
                                                io 0x64 = 0x1600
                                                io 0x66 = 0x1604
                                        end

                                        register "config0" = "0xa6"
                                        register "config1" = "0x05"
                                        register "config2" = "0xa0"
                                        register "config3" = "0x01"

                                        register "beepmask0" = "0xfe"
                                        register "beepmask1" = "0x96"
                                        register "has_power_management_beeps" = "1"

                                        register "event2_enable" = "0xff"
                                        register "event3_enable" = "0xff"
                                        register "event4_enable" = "0xf4"
                                        register "event5_enable" = "0x3c"
                                        register "event6_enable" = "0x80"
                                        register "event7_enable" = "0x01"
                                        register "eventc_enable" = "0x3c"
                                        register "event8_enable" = "0x01"
                                        register "event9_enable" = "0xff"
                                        register "eventa_enable" = "0xff"
                                        register "eventb_enable" = "0xff"
                                        register "eventc_enable" = "0xff"
                                        register "eventd_enable" = "0xff"
                                end
                                chip superio/nsc/pc87382
                                        device pnp 164e.2 on # IR
                                                io 0x60 = 0x2f8
                                        end

                                        device pnp 164e.3 off # Serial Port
                                                io 0x60 = 0x3f8
                                        end

                                        device pnp 164e.7 on # GPIO
                                                io 0x60 = 0x1680
                                        end

                                        device pnp 164e.19 on # DLPC
                                                io 0x60 = 0x164c
                                        end
                                end

                                chip superio/nsc/pc87392
                                        device pnp 2e.0 off #FDC
                                        end

                                        device pnp 2e.1 on # Parallel Port
                                                io 0x60 = 0x3bc
                                                irq 0x70 = 7
                                        end

                                        device pnp 2e.2 off # Serial Port / IR
                                                io 0x60 = 0x2f8
                                                irq 0x70 = 4
                                        end

                                        device pnp 2e.3 on # Serial Port
                                                io 0x60 = 0x3f8
                                                irq 0x70 = 4
                                        end

                                        device pnp 2e.7 on # GPIO
                                                io 0x60 = 0x1620
                                        end

                                        device pnp 2e.a off # WDT
                                        end
                                end
                        end
                        device pci 1f.1 on # IDE
                                subsystemid 0x17aa 0x200c
                        end
                        device pci 1f.2 on # SATA
                                subsystemid 0x17aa 0x200d
                        end
                        device pci 1f.3 on # SMBUS
                                subsystemid 0x17aa 0x200f
                                chip drivers/ics/954309
                                        register "reg0" = "0x2e"
                                        register "reg1" = "0xf7"
                                        register "reg2" = "0x3c"
                                        register "reg3" = "0x20"
                                        register "reg4" = "0x01"
                                        register "reg5" = "0x00"
                                        register "reg6" = "0x1b"
                                        register "reg7" = "0x01"
                                        register "reg8" = "0x54"
                                        register "reg9" = "0xff"
                                        register "reg10" = "0xff"
                                        register "reg11" = "0x07"
                                        device i2c 69 on end
                                end
                                # eeprom, 8 virtual devices, same chip
                                chip drivers/i2c/at24rf08c
                                        device i2c 54 on end
                                        device i2c 55 on end
                                        device i2c 56 on end
                                        device i2c 57 on end
                                        device i2c 5c on end
                                        device i2c 5d on end
                                        device i2c 5e on end
                                        device i2c 5f on end
                                end
                        end
                end
                chip southbridge/ricoh/rl5c476
                end
        end
end