conn rcv_lock converted to spinlock, struct cor_sock created, kernel_packet skb_clone...
[cor_2_6_31.git] / sound / soc / sh / ssi.c
blobb378096cadb1566e4e6dad55ae94cf7c0f6e9e25
1 /*
2 * Serial Sound Interface (I2S) support for SH7760/SH7780
4 * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
6 * licensed under the terms outlined in the file COPYING at the root
7 * of the linux kernel sources.
9 * dont forget to set IPSEL/OMSEL register bits (in your board code) to
10 * enable SSI output pins!
14 * LIMITATIONS:
15 * The SSI unit has only one physical data line, so full duplex is
16 * impossible. This can be remedied on the SH7760 by using the
17 * other SSI unit for recording; however the SH7780 has only 1 SSI
18 * unit, and its pins are shared with the AC97 unit, among others.
20 * FEATURES:
21 * The SSI features "compressed mode": in this mode it continuously
22 * streams PCM data over the I2S lines and uses LRCK as a handshake
23 * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
24 * The number of bits sent over the wire in a frame can be adjusted
25 * and can be independent from the actual sample bit depth. This is
26 * useful to support TDM mode codecs like the AD1939 which have a
27 * fixed TDM slot size, regardless of sample resolution.
30 #include <linux/init.h>
31 #include <linux/module.h>
32 #include <linux/platform_device.h>
33 #include <sound/core.h>
34 #include <sound/pcm.h>
35 #include <sound/initval.h>
36 #include <sound/soc.h>
37 #include <asm/io.h>
39 #define SSICR 0x00
40 #define SSISR 0x04
42 #define CR_DMAEN (1 << 28)
43 #define CR_CHNL_SHIFT 22
44 #define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
45 #define CR_DWL_SHIFT 19
46 #define CR_DWL_MASK (7 << CR_DWL_SHIFT)
47 #define CR_SWL_SHIFT 16
48 #define CR_SWL_MASK (7 << CR_SWL_SHIFT)
49 #define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
50 #define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
51 #define CR_SCKP (1 << 13) /* I2Sclock polarity */
52 #define CR_SWSP (1 << 12) /* LRCK polarity */
53 #define CR_SPDP (1 << 11)
54 #define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
55 #define CR_PDTA (1 << 9) /* fifo data alignment */
56 #define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
57 #define CR_BREN (1 << 7) /* clock gating in burst mode */
58 #define CR_CKDIV_SHIFT 4
59 #define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
60 #define CR_MUTE (1 << 3) /* SSI mute */
61 #define CR_CPEN (1 << 2) /* compressed mode */
62 #define CR_TRMD (1 << 1) /* transmit/receive select */
63 #define CR_EN (1 << 0) /* enable SSI */
65 #define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
67 struct ssi_priv {
68 unsigned long mmio;
69 unsigned long sysclk;
70 int inuse;
71 } ssi_cpu_data[] = {
72 #if defined(CONFIG_CPU_SUBTYPE_SH7760)
74 .mmio = 0xFE680000,
77 .mmio = 0xFE690000,
79 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
81 .mmio = 0xFFE70000,
83 #else
84 #error "Unsupported SuperH SoC"
85 #endif
89 * track usage of the SSI; it is simplex-only so prevent attempts of
90 * concurrent playback + capture. FIXME: any locking required?
92 static int ssi_startup(struct snd_pcm_substream *substream,
93 struct snd_soc_dai *dai)
95 struct snd_soc_pcm_runtime *rtd = substream->private_data;
96 struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
97 if (ssi->inuse) {
98 pr_debug("ssi: already in use!\n");
99 return -EBUSY;
100 } else
101 ssi->inuse = 1;
102 return 0;
105 static void ssi_shutdown(struct snd_pcm_substream *substream,
106 struct snd_soc_dai *dai)
108 struct snd_soc_pcm_runtime *rtd = substream->private_data;
109 struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
111 ssi->inuse = 0;
114 static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
115 struct snd_soc_dai *dai)
117 struct snd_soc_pcm_runtime *rtd = substream->private_data;
118 struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
120 switch (cmd) {
121 case SNDRV_PCM_TRIGGER_START:
122 SSIREG(SSICR) |= CR_DMAEN | CR_EN;
123 break;
124 case SNDRV_PCM_TRIGGER_STOP:
125 SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
126 break;
127 default:
128 return -EINVAL;
131 return 0;
134 static int ssi_hw_params(struct snd_pcm_substream *substream,
135 struct snd_pcm_hw_params *params,
136 struct snd_soc_dai *dai)
138 struct snd_soc_pcm_runtime *rtd = substream->private_data;
139 struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
140 unsigned long ssicr = SSIREG(SSICR);
141 unsigned int bits, channels, swl, recv, i;
143 channels = params_channels(params);
144 bits = params->msbits;
145 recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
147 pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
148 pr_debug("bits: %u channels: %u\n", bits, channels);
150 ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
151 CR_SWL_MASK);
153 /* direction (send/receive) */
154 if (!recv)
155 ssicr |= CR_TRMD; /* transmit */
157 /* channels */
158 if ((channels < 2) || (channels > 8) || (channels & 1)) {
159 pr_debug("ssi: invalid number of channels\n");
160 return -EINVAL;
162 ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
164 /* DATA WORD LENGTH (DWL): databits in audio sample */
165 i = 0;
166 switch (bits) {
167 case 32: ++i;
168 case 24: ++i;
169 case 22: ++i;
170 case 20: ++i;
171 case 18: ++i;
172 case 16: ++i;
173 ssicr |= i << CR_DWL_SHIFT;
174 case 8: break;
175 default:
176 pr_debug("ssi: invalid sample width\n");
177 return -EINVAL;
181 * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
182 * wires. This is usually bits_per_sample x channels/2; i.e. in
183 * Stereo mode the SWL equals DWL. SWL can be bigger than the
184 * product of (channels_per_slot x samplebits), e.g. for codecs
185 * like the AD1939 which only accept 32bit wide TDM slots. For
186 * "standard" I2S operation we set SWL = chans / 2 * DWL here.
187 * Waiting for ASoC to get TDM support ;-)
189 if ((bits > 16) && (bits <= 24)) {
190 bits = 24; /* these are padded by the SSI */
191 /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
193 i = 0;
194 swl = (bits * channels) / 2;
195 switch (swl) {
196 case 256: ++i;
197 case 128: ++i;
198 case 64: ++i;
199 case 48: ++i;
200 case 32: ++i;
201 case 16: ++i;
202 ssicr |= i << CR_SWL_SHIFT;
203 case 8: break;
204 default:
205 pr_debug("ssi: invalid system word length computed\n");
206 return -EINVAL;
209 SSIREG(SSICR) = ssicr;
211 pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
212 return 0;
215 static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
216 unsigned int freq, int dir)
218 struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
220 ssi->sysclk = freq;
222 return 0;
226 * This divider is used to generate the SSI_SCK (I2S bitclock) from the
227 * clock at the HAC_BIT_CLK ("oversampling clock") pin.
229 static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
231 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
232 unsigned long ssicr;
233 int i;
235 i = 0;
236 ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
237 switch (div) {
238 case 16: ++i;
239 case 8: ++i;
240 case 4: ++i;
241 case 2: ++i;
242 SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
243 case 1: break;
244 default:
245 pr_debug("ssi: invalid sck divider %d\n", div);
246 return -EINVAL;
249 return 0;
252 static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
254 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
255 unsigned long ssicr = SSIREG(SSICR);
257 pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
259 ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
260 CR_SWS_MASTER | CR_SCK_MASTER);
262 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
263 case SND_SOC_DAIFMT_I2S:
264 break;
265 case SND_SOC_DAIFMT_RIGHT_J:
266 ssicr |= CR_DEL | CR_PDTA;
267 break;
268 case SND_SOC_DAIFMT_LEFT_J:
269 ssicr |= CR_DEL;
270 break;
271 default:
272 pr_debug("ssi: unsupported format\n");
273 return -EINVAL;
276 switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
277 case SND_SOC_DAIFMT_CONT:
278 break;
279 case SND_SOC_DAIFMT_GATED:
280 ssicr |= CR_BREN;
281 break;
284 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
285 case SND_SOC_DAIFMT_NB_NF:
286 ssicr |= CR_SCKP; /* sample data at low clkedge */
287 break;
288 case SND_SOC_DAIFMT_NB_IF:
289 ssicr |= CR_SCKP | CR_SWSP;
290 break;
291 case SND_SOC_DAIFMT_IB_NF:
292 break;
293 case SND_SOC_DAIFMT_IB_IF:
294 ssicr |= CR_SWSP; /* word select starts low */
295 break;
296 default:
297 pr_debug("ssi: invalid inversion\n");
298 return -EINVAL;
301 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
302 case SND_SOC_DAIFMT_CBM_CFM:
303 break;
304 case SND_SOC_DAIFMT_CBS_CFM:
305 ssicr |= CR_SCK_MASTER;
306 break;
307 case SND_SOC_DAIFMT_CBM_CFS:
308 ssicr |= CR_SWS_MASTER;
309 break;
310 case SND_SOC_DAIFMT_CBS_CFS:
311 ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
312 break;
313 default:
314 pr_debug("ssi: invalid master/slave configuration\n");
315 return -EINVAL;
318 SSIREG(SSICR) = ssicr;
319 pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
321 return 0;
324 /* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
325 * Master mode, so really this is board specific; the SSI can do any
326 * rate with the right bitclk and divider settings.
328 #define SSI_RATES \
329 SNDRV_PCM_RATE_8000_192000
331 /* the SSI can do 8-32 bit samples, with 8 possible channels */
332 #define SSI_FMTS \
333 (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
334 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
335 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
336 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
337 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
339 static struct snd_soc_dai_ops ssi_dai_ops = {
340 .startup = ssi_startup,
341 .shutdown = ssi_shutdown,
342 .trigger = ssi_trigger,
343 .hw_params = ssi_hw_params,
344 .set_sysclk = ssi_set_sysclk,
345 .set_clkdiv = ssi_set_clkdiv,
346 .set_fmt = ssi_set_fmt,
349 struct snd_soc_dai sh4_ssi_dai[] = {
351 .name = "SSI0",
352 .id = 0,
353 .playback = {
354 .rates = SSI_RATES,
355 .formats = SSI_FMTS,
356 .channels_min = 2,
357 .channels_max = 8,
359 .capture = {
360 .rates = SSI_RATES,
361 .formats = SSI_FMTS,
362 .channels_min = 2,
363 .channels_max = 8,
365 .ops = &ssi_dai_ops,
367 #ifdef CONFIG_CPU_SUBTYPE_SH7760
369 .name = "SSI1",
370 .id = 1,
371 .playback = {
372 .rates = SSI_RATES,
373 .formats = SSI_FMTS,
374 .channels_min = 2,
375 .channels_max = 8,
377 .capture = {
378 .rates = SSI_RATES,
379 .formats = SSI_FMTS,
380 .channels_min = 2,
381 .channels_max = 8,
383 .ops = &ssi_dai_ops,
385 #endif
387 EXPORT_SYMBOL_GPL(sh4_ssi_dai);
389 static int __init sh4_ssi_init(void)
391 return snd_soc_register_dais(sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
393 module_init(sh4_ssi_init);
395 static void __exit sh4_ssi_exit(void)
397 snd_soc_unregister_dais(sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
399 module_exit(sh4_ssi_exit);
401 MODULE_LICENSE("GPL");
402 MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
403 MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");