conn rcv_lock converted to spinlock, struct cor_sock created, kernel_packet skb_clone...
[cor_2_6_31.git] / drivers / hwmon / thmc50.c
blob7d97431e132f2f76fbc22e1e8d693d7c0e58b017
1 /*
2 thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
5 Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
6 Philip Edelbrock <phil@netroedge.com>
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/i2c.h>
27 #include <linux/hwmon.h>
28 #include <linux/hwmon-sysfs.h>
29 #include <linux/err.h>
30 #include <linux/mutex.h>
32 MODULE_LICENSE("GPL");
34 /* Addresses to scan */
35 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
37 /* Insmod parameters */
38 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
39 I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
40 "to enable 3rd temperature (ADM1022 only)");
42 /* Many THMC50 constants specified below */
44 /* The THMC50 registers */
45 #define THMC50_REG_CONF 0x40
46 #define THMC50_REG_COMPANY_ID 0x3E
47 #define THMC50_REG_DIE_CODE 0x3F
48 #define THMC50_REG_ANALOG_OUT 0x19
50 * The mirror status register cannot be used as
51 * reading it does not clear alarms.
53 #define THMC50_REG_INTR 0x41
55 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
56 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
57 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
58 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
59 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
61 #define THMC50_REG_CONF_nFANOFF 0x20
62 #define THMC50_REG_CONF_PROGRAMMED 0x08
64 /* Each client has this additional data */
65 struct thmc50_data {
66 struct device *hwmon_dev;
68 struct mutex update_lock;
69 enum chips type;
70 unsigned long last_updated; /* In jiffies */
71 char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */
72 char valid; /* !=0 if following fields are valid */
74 /* Register values */
75 s8 temp_input[3];
76 s8 temp_max[3];
77 s8 temp_min[3];
78 s8 temp_critical[3];
79 u8 analog_out;
80 u8 alarms;
83 static int thmc50_detect(struct i2c_client *client, int kind,
84 struct i2c_board_info *info);
85 static int thmc50_probe(struct i2c_client *client,
86 const struct i2c_device_id *id);
87 static int thmc50_remove(struct i2c_client *client);
88 static void thmc50_init_client(struct i2c_client *client);
89 static struct thmc50_data *thmc50_update_device(struct device *dev);
91 static const struct i2c_device_id thmc50_id[] = {
92 { "adm1022", adm1022 },
93 { "thmc50", thmc50 },
94 { }
96 MODULE_DEVICE_TABLE(i2c, thmc50_id);
98 static struct i2c_driver thmc50_driver = {
99 .class = I2C_CLASS_HWMON,
100 .driver = {
101 .name = "thmc50",
103 .probe = thmc50_probe,
104 .remove = thmc50_remove,
105 .id_table = thmc50_id,
106 .detect = thmc50_detect,
107 .address_data = &addr_data,
110 static ssize_t show_analog_out(struct device *dev,
111 struct device_attribute *attr, char *buf)
113 struct thmc50_data *data = thmc50_update_device(dev);
114 return sprintf(buf, "%d\n", data->analog_out);
117 static ssize_t set_analog_out(struct device *dev,
118 struct device_attribute *attr,
119 const char *buf, size_t count)
121 struct i2c_client *client = to_i2c_client(dev);
122 struct thmc50_data *data = i2c_get_clientdata(client);
123 int tmp = simple_strtoul(buf, NULL, 10);
124 int config;
126 mutex_lock(&data->update_lock);
127 data->analog_out = SENSORS_LIMIT(tmp, 0, 255);
128 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
129 data->analog_out);
131 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
132 if (data->analog_out == 0)
133 config &= ~THMC50_REG_CONF_nFANOFF;
134 else
135 config |= THMC50_REG_CONF_nFANOFF;
136 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
138 mutex_unlock(&data->update_lock);
139 return count;
142 /* There is only one PWM mode = DC */
143 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
144 char *buf)
146 return sprintf(buf, "0\n");
149 /* Temperatures */
150 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
151 char *buf)
153 int nr = to_sensor_dev_attr(attr)->index;
154 struct thmc50_data *data = thmc50_update_device(dev);
155 return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
158 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
159 char *buf)
161 int nr = to_sensor_dev_attr(attr)->index;
162 struct thmc50_data *data = thmc50_update_device(dev);
163 return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
166 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
167 const char *buf, size_t count)
169 int nr = to_sensor_dev_attr(attr)->index;
170 struct i2c_client *client = to_i2c_client(dev);
171 struct thmc50_data *data = i2c_get_clientdata(client);
172 int val = simple_strtol(buf, NULL, 10);
174 mutex_lock(&data->update_lock);
175 data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
176 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
177 data->temp_min[nr]);
178 mutex_unlock(&data->update_lock);
179 return count;
182 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
183 char *buf)
185 int nr = to_sensor_dev_attr(attr)->index;
186 struct thmc50_data *data = thmc50_update_device(dev);
187 return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
190 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
191 const char *buf, size_t count)
193 int nr = to_sensor_dev_attr(attr)->index;
194 struct i2c_client *client = to_i2c_client(dev);
195 struct thmc50_data *data = i2c_get_clientdata(client);
196 int val = simple_strtol(buf, NULL, 10);
198 mutex_lock(&data->update_lock);
199 data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
200 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
201 data->temp_max[nr]);
202 mutex_unlock(&data->update_lock);
203 return count;
206 static ssize_t show_temp_critical(struct device *dev,
207 struct device_attribute *attr,
208 char *buf)
210 int nr = to_sensor_dev_attr(attr)->index;
211 struct thmc50_data *data = thmc50_update_device(dev);
212 return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
215 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
216 char *buf)
218 int index = to_sensor_dev_attr(attr)->index;
219 struct thmc50_data *data = thmc50_update_device(dev);
221 return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
224 #define temp_reg(offset) \
225 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \
226 NULL, offset - 1); \
227 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
228 show_temp_min, set_temp_min, offset - 1); \
229 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
230 show_temp_max, set_temp_max, offset - 1); \
231 static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \
232 show_temp_critical, NULL, offset - 1);
234 temp_reg(1);
235 temp_reg(2);
236 temp_reg(3);
238 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0);
239 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
240 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1);
241 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7);
242 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
244 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
245 set_analog_out, 0);
246 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
248 static struct attribute *thmc50_attributes[] = {
249 &sensor_dev_attr_temp1_max.dev_attr.attr,
250 &sensor_dev_attr_temp1_min.dev_attr.attr,
251 &sensor_dev_attr_temp1_input.dev_attr.attr,
252 &sensor_dev_attr_temp1_crit.dev_attr.attr,
253 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
254 &sensor_dev_attr_temp2_max.dev_attr.attr,
255 &sensor_dev_attr_temp2_min.dev_attr.attr,
256 &sensor_dev_attr_temp2_input.dev_attr.attr,
257 &sensor_dev_attr_temp2_crit.dev_attr.attr,
258 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
259 &sensor_dev_attr_temp2_fault.dev_attr.attr,
260 &sensor_dev_attr_pwm1.dev_attr.attr,
261 &sensor_dev_attr_pwm1_mode.dev_attr.attr,
262 NULL
265 static const struct attribute_group thmc50_group = {
266 .attrs = thmc50_attributes,
269 /* for ADM1022 3rd temperature mode */
270 static struct attribute *temp3_attributes[] = {
271 &sensor_dev_attr_temp3_max.dev_attr.attr,
272 &sensor_dev_attr_temp3_min.dev_attr.attr,
273 &sensor_dev_attr_temp3_input.dev_attr.attr,
274 &sensor_dev_attr_temp3_crit.dev_attr.attr,
275 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
276 &sensor_dev_attr_temp3_fault.dev_attr.attr,
277 NULL
280 static const struct attribute_group temp3_group = {
281 .attrs = temp3_attributes,
284 /* Return 0 if detection is successful, -ENODEV otherwise */
285 static int thmc50_detect(struct i2c_client *client, int kind,
286 struct i2c_board_info *info)
288 unsigned company;
289 unsigned revision;
290 unsigned config;
291 struct i2c_adapter *adapter = client->adapter;
292 int err = 0;
293 const char *type_name;
295 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
296 pr_debug("thmc50: detect failed, "
297 "smbus byte data not supported!\n");
298 return -ENODEV;
301 pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
302 client->addr, i2c_adapter_id(client->adapter));
304 /* Now, we do the remaining detection. */
305 company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
306 revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
307 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
309 if (kind == 0)
310 kind = thmc50;
311 else if (kind < 0) {
312 err = -ENODEV;
313 if (revision >= 0xc0 && ((config & 0x10) == 0)) {
314 if (company == 0x49) {
315 kind = thmc50;
316 err = 0;
317 } else if (company == 0x41) {
318 kind = adm1022;
319 err = 0;
323 if (err == -ENODEV) {
324 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
325 return err;
328 if (kind == adm1022) {
329 int id = i2c_adapter_id(client->adapter);
330 int i;
332 type_name = "adm1022";
333 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
334 if (adm1022_temp3[i] == id &&
335 adm1022_temp3[i + 1] == client->addr) {
336 /* enable 2nd remote temp */
337 config |= (1 << 7);
338 i2c_smbus_write_byte_data(client,
339 THMC50_REG_CONF,
340 config);
341 break;
343 } else {
344 type_name = "thmc50";
346 pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
347 type_name, (revision >> 4) - 0xc, revision & 0xf);
349 strlcpy(info->type, type_name, I2C_NAME_SIZE);
351 return 0;
354 static int thmc50_probe(struct i2c_client *client,
355 const struct i2c_device_id *id)
357 struct thmc50_data *data;
358 int err;
360 data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL);
361 if (!data) {
362 pr_debug("thmc50: detect failed, kzalloc failed!\n");
363 err = -ENOMEM;
364 goto exit;
367 i2c_set_clientdata(client, data);
368 data->type = id->driver_data;
369 mutex_init(&data->update_lock);
371 thmc50_init_client(client);
373 /* Register sysfs hooks */
374 if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
375 goto exit_free;
377 /* Register ADM1022 sysfs hooks */
378 if (data->has_temp3)
379 if ((err = sysfs_create_group(&client->dev.kobj,
380 &temp3_group)))
381 goto exit_remove_sysfs_thmc50;
383 /* Register a new directory entry with module sensors */
384 data->hwmon_dev = hwmon_device_register(&client->dev);
385 if (IS_ERR(data->hwmon_dev)) {
386 err = PTR_ERR(data->hwmon_dev);
387 goto exit_remove_sysfs;
390 return 0;
392 exit_remove_sysfs:
393 if (data->has_temp3)
394 sysfs_remove_group(&client->dev.kobj, &temp3_group);
395 exit_remove_sysfs_thmc50:
396 sysfs_remove_group(&client->dev.kobj, &thmc50_group);
397 exit_free:
398 kfree(data);
399 exit:
400 return err;
403 static int thmc50_remove(struct i2c_client *client)
405 struct thmc50_data *data = i2c_get_clientdata(client);
407 hwmon_device_unregister(data->hwmon_dev);
408 sysfs_remove_group(&client->dev.kobj, &thmc50_group);
409 if (data->has_temp3)
410 sysfs_remove_group(&client->dev.kobj, &temp3_group);
412 kfree(data);
414 return 0;
417 static void thmc50_init_client(struct i2c_client *client)
419 struct thmc50_data *data = i2c_get_clientdata(client);
420 int config;
422 data->analog_out = i2c_smbus_read_byte_data(client,
423 THMC50_REG_ANALOG_OUT);
424 /* set up to at least 1 */
425 if (data->analog_out == 0) {
426 data->analog_out = 1;
427 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
428 data->analog_out);
430 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
431 config |= 0x1; /* start the chip if it is in standby mode */
432 if (data->type == adm1022 && (config & (1 << 7)))
433 data->has_temp3 = 1;
434 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
437 static struct thmc50_data *thmc50_update_device(struct device *dev)
439 struct i2c_client *client = to_i2c_client(dev);
440 struct thmc50_data *data = i2c_get_clientdata(client);
441 int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
443 mutex_lock(&data->update_lock);
445 if (time_after(jiffies, data->last_updated + timeout)
446 || !data->valid) {
448 int temps = data->has_temp3 ? 3 : 2;
449 int i;
450 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
452 prog &= THMC50_REG_CONF_PROGRAMMED;
454 for (i = 0; i < temps; i++) {
455 data->temp_input[i] = i2c_smbus_read_byte_data(client,
456 THMC50_REG_TEMP[i]);
457 data->temp_max[i] = i2c_smbus_read_byte_data(client,
458 THMC50_REG_TEMP_MAX[i]);
459 data->temp_min[i] = i2c_smbus_read_byte_data(client,
460 THMC50_REG_TEMP_MIN[i]);
461 data->temp_critical[i] =
462 i2c_smbus_read_byte_data(client,
463 prog ? THMC50_REG_TEMP_CRITICAL[i]
464 : THMC50_REG_TEMP_DEFAULT[i]);
466 data->analog_out =
467 i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
468 data->alarms =
469 i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
470 data->last_updated = jiffies;
471 data->valid = 1;
474 mutex_unlock(&data->update_lock);
476 return data;
479 static int __init sm_thmc50_init(void)
481 return i2c_add_driver(&thmc50_driver);
484 static void __exit sm_thmc50_exit(void)
486 i2c_del_driver(&thmc50_driver);
489 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
490 MODULE_DESCRIPTION("THMC50 driver");
492 module_init(sm_thmc50_init);
493 module_exit(sm_thmc50_exit);